A uniform capillary tube contains dry air enclosed by a mercury pellet at 27 °C The length of enclosed air is 30 cm. When the tube is immersed in a boiling liquid, the length of air column is increased by 10 cm. The boiling temperature of this liquid is..

Answers

Answer 1

Answer:

This temperature is equivalent to 87°C.

.


Related Questions

the b) part please...

Answers

Tyres have a tread pattern to improve traction and provide better handling on a variety of road surfaces, including wet and slippery conditions.

Why do tyres use a tread pattern ?

The tread pattern on tyres is designed to provide a number of benefits for drivers. One of the main reasons for the tread pattern is to improve traction, particularly on wet or slippery surfaces.

The pattern provides channels or grooves that help to channel water away from the surface of the tyre, reducing the risk of hydroplaning and improving grip on wet roads. This can be particularly important in areas with frequent rainfall or snow. The tread pattern also helps to improve handling on a variety of road surfaces.

Find out more on tyres at https://brainly.com/question/20392462

#SPJ1

A thin uniform rod of mass M and length L is bent at its center so that the two segments are now perpendicular to each other.A) Find its moment of inertia about an axis perpendicular to its plane and passing through the point where the two segments meet.B) Find its moment of inertia about an axis perpendicular to its plane and passing through the midpoint of the line connecting its two ends.

Answers

A thin uniform rod of mass M and length L is bent at its center so that the two segments are now perpendicular to each other.

A) To find the moment of inertia about an axis perpendicular to its plane and passing through the point where the two segments meet, we can use the parallel axis theorem. The moment of inertia of a thin rod of length L and mass M can be found to be:
I = mL^2 /12
Now, we need to add the distance between the axis of rotation and the centre of mass. The distance between the two points is L/2. Thus, the moment of inertia is:
I = mL^2/12 + mL^2/4 = mL^2/3

B) To find the moment of inertia about an axis perpendicular to its plane and passing through the midpoint of the line connecting its two ends, we can use the perpendicular axis theorem. The moment of inertia of the rod can be found to be:
I = mL^2/3

Since the distance between the axis of rotation and the Centre of mass is 0, the moment of inertia remains the same.

for more such questions on moment of inertia .

https://brainly.com/question/14460640

#SPJ11

the strongest region of a magnet can be found at ______.

Answers

Answer:

Africa

Explanation:

define wavelength and amplitude. when considering color vision, how does our visual system interpret wavelength? amplitude? provide examples to illustrate your answer.

Answers

When we consider color vision, the visual system interprets wavelength and amplitude. The definition of wavelength and amplitude is given below.

Wavelength is the distance between two points, measured in the direction of propagation, that correspond to the same phase of the wave. Its symbol is λ. The distance traveled by one full cycle of the wave is its wavelength.

The human eye has a visual spectrum of wavelengths ranging from 400 to 700 nanometers. Amplitude is the extent of displacement or change in the oscillatory motion of a wave, particularly of a sound wave, electromagnetic wave, or other wave. Its symbol is A. The amplitude of a wave is the height of the wave's crest, measured from its resting position to its highest point.Color vision and how it interprets wavelength and amplitude Our visual system perceives color by interpreting light waves of different wavelengths. When light waves enter our eyes, they are broken down into different wavelengths, which our eyes interpret as color. When our eyes see light of different wavelengths, they appear to be different colors. The shorter the wavelength, the bluer the light appears, and the longer the wavelength, the redder it appears.

As a result, if we consider color vision, our visual system interprets wavelength and amplitude. The human eye sees different colors by interpreting different wavelengths of light. For example, when we see a rainbow, we can see all of the colors, such as red, orange, yellow, green, blue, indigo, and violet. The rainbow has a wavelength spectrum ranging from 400 to 700 nanometers.A rainbow is a natural phenomenon that occurs when light is refracted by water droplets, producing a spectrum of colors. Another instance of color vision is a sunset. The sky appears red and orange during a sunset because the longer wavelengths of light are refracted more than the shorter ones. When light waves travel through the atmosphere and bounce off the Earth's surface, this occurs.

Learn more about visual system at: brainly.com/question/29557195

#SPJ11

when a falling merteoiud is at a distance above the earth's surface of 3 times the earth's radius what is it acelartion due to earths gravitation

Answers

At a distance above the Earth's surface of 3 times the Earth's radius, the acceleration due to Earth's gravity is approximately 1.23 m/s².

Distance above the Earth's surface of 3 times the Earth's radius, the distance from the center of the Earth is:

d = 4 * R

where R is the radius of the Earth.

The acceleration due to gravity at this distance can be calculated using the formula:

a = G * M / d²

where G is the gravitational constant,

M is the mass of the Earth, and

d is the distance from the center of the Earth.

Substituting the values, we get:

a = G * M / (4*R)²

where G = 6.67 × 10⁻¹¹ Nm²/kg² and M = 5.97 × 10²⁴ kg.

Substituting these values, we get:

a = 1.23 m/s²

Therefore, the acceleration due to Earth's gravity at a distance above the Earth's surface of 3 times the Earth's radius is approximately 1.23 m/s².

To practice more questions about 'acceleration':

https://brainly.com/question/460763

#SPJ11

-How did Carver's work impact the lives of farmers in
the South? Describe two ways.

Answers

George Washington Carver, an agricultural scientist, had a significant impact on the lives of farmers in the Southern United States. Here are two ways that his work influenced their lives:

Crop Diversification: Carver encouraged farmers to diversify their crops and move away from their dependence on cotton.

Soil Conservation: Carver was a strong advocate for soil conservation and introduced farming practices that helped to conserve soil. He recommended practices such as crop rotation, using cover crops, and adding organic matter to the soil to improve its quality.

Thus, this way, Carver's work impact the lives of farmers in the South.

For more details regarding George Washington Carver, visit:

https://brainly.com/question/11044676

#SPJ1

If it takes 726 watts of power to move a mass 36 meters in 14 seconds, then what is the magnitude of the object’s mass?

A. 12. 1 kg

B. 20. 2 kg

C. 28. 8 kg

D. 282 kg

Answers

Answer: mass=28.8kg

Power , p =726 watt

              displacement, d =36m

               time ,t =14s

                g=9.8m/s^2

               p= (work)/t

               p=(mg*d)/t

               726=(m*9.8*36)/14

                m= 28.8kg

                     

Explanation: when a force causes displacement of the body , work is said to be done on the body. Power is the rate of doing work. Hence here power was applied on a body of certain mass which caused the given displacement of the body in given time.

What will this wave look like when it reflects across a free boundary?

Answers

The amplitude of the reflected wave is opposite to the amplitude of the original wave.

When a wave reflects across a free boundary, it undergoes a change in direction and amplitude. The reflected wave looks like the original wave, but it's inverted. It means that the reflected wave's crest becomes a trough, and the trough becomes a crest.What is a wave?A wave is a disturbance that travels through space and time, carrying energy without carrying matter along with it. The movement of energy through a body of water, such as the ocean, is a typical example of a wave.A free boundary refers to a boundary that is not restricted. An example of a free boundary is a reflecting surface. When waves reflect off of a free boundary, they bounce back in the opposite direction. The angle of reflection equals the angle of incidence.The wave looks similar to the original wave, but it is inverted or flipped. The crest of the original wave becomes the trough of the reflected wave, and the trough becomes the crest.

Learn more about wave here:

https://brainly.com/question/30420960

#SPJ4

A student is investigating the effect of the size of the current flowing on the strength of an electromagnet

What are the Independant and dependant variables in her investigation?

What is a practical way she could measure the strength of the magnetic field produced by the electromagnet?

What instruments should she use to measure the size of the electric current?

What are the units of the electric current?

Who ever answers this I will give 45 points :) ​

Answers

Answer:

Independent Variable: The size of the current flowing through the wire.

Dependent Variable: The strength of the electromagnetic field produced by the wire.

A practical way to measure the strength of the magnetic field would be to use a compass to determine the direction of the magnetic field lines. As the strength of the magnetic field increases, the compass needle will deflect more from its original position.

To measure the size of the electric current, she could use an ammeter. An ammeter is a device that connects in series with the wire and measures electric current in amperes (A).

The units of electric current are amperes (A), named after André-Marie Ampère, a French physicist who is one of the founders of electrodynamics.

I hope this helps!

What are the Independent and dependent variables in her investigation?The independent variable in the study is the size of the current flowing through the wire.The dependent variable in the study is the strength of the electromagnetic field produced by the wire.

Which practical way can she measure strength of the magnetic field?

One of the most practical way to measure the strength of the magnetic field would be to use a compass to determine the direction of the magnetic field lines. As the strength of the magnetic field increases, the compass needle will deflect more from its original position.

What instruments should she use to measure the size of the electric current?

In order to measure the size of the electric current, she could use an ammeter. An ammeter means a device that connects in series with the wire and measures electric current in amperes (A).

What are the units of the electric current?

The units of electric current are amperes (A), named after André-Marie Ampère, a French physicist who is one of the founders of electrodynamics.

Read more about electromagnet

brainly.com/question/12555869

#SPJ1

if the ground on a machine is live (hot) and causes an electrical shock, what does this likely mean?

Answers

If the ground on a machine is live (hot) and causes an electrical shock, this likely means that there is a fault in the electrical system, such as broken insulation or a short circuit.

A machine's electrical system is malfunctioning if the ground is live and generates an electrical shock. The machine's ground is meant to offer a secure route for electrical current to flow to earth in the event that there is an electrical system malfunction. An electrical conductor is said to be "live" if it is carrying an electrical current. A live ground indicates a hole in the electrical system's insulation that allows electrical current to pass to the ground, posing a serious safety risk. To reduce the risk of electrical shock or electrocution to anybody coming into touch with the equipment, immediate action should be made to shut it down and rectify the problem before future usage.

learn more about electrical system here:

https://brainly.com/question/30585051

#SPJ4

write a statement (your hypothesis) about what you think will happen in the parallel circuit when you remove one resistor (led). support your answer with reasoning.

Answers

My hypothesis is that when one resistor (LED) is removed from a parallel circuit, the overall resistance of the circuit will decrease.

This is because parallel circuits have multiple paths for current to flow through, and removing one resistor (LED) reduces the number of paths and increases the current flow through the remaining resistors.

What happens when one resistor is removed from a parallel circuit?

When you remove one resistor from a parallel circuit, the current through the other resistors will increase because there are fewer resistors for the current to flow through. This means that the overall resistance of the circuit decreases when you remove one resistor. This is because parallel circuits have multiple paths for current to flow through.

Removing one resistor reduces the number of paths and increases the current flow through the remaining resistors. A parallel circuit is a circuit in which the components are connected in such a way that the voltage is the same across each component.

In contrast, a series circuit is a circuit in which the components are connected in a series, so the same current flows through each component.

To know more about Parallel circuit refer here:

https://brainly.com/question/26589211#

#SPJ11

a formula that relatively accurately predicts the orbital distances of the first eight major bodies in the solar system and then somewhat predicts the next several is known as

Answers

The formula that relatively accurately predicts the orbital distances of the first eight major bodies in the solar system and then somewhat predicts the next several is known as the Titius-Bode law.

Titius-Bode law is a generalization, or rule of thumb, that appears to describe the orbital distances of the planets of the Solar System. The sequence is 0, 3, 6, 12, 24, 48, 96, and 192. The seventh number, 384, is used as a substitute for Jupiter's real mean distance from the Sun, which is 483.6 million miles.The distance from the Sun to the planets in our Solar System follows a regular pattern known as the Titius-Bode law, which predicts the distance of the planet to the Sun based on its position in the sequence.

The Titius-Bode law is named after two eighteenth-century German astronomers, Johann Daniel Titius and Johann Elert Bode. It was initially proposed in 1766 by Titius as an empirical hypothesis, with little explanation of why it should work, and was later refined by Bode in 1778 into a formula, which became known as Bode's law or the Titius-Bode law.

Learn more about orbital distances and solar system at: https://brainly.com/question/14012647

#SPJ11

if there were two telescopes with the same diameter, but one is a visible light telescope and the other a radio telescope, how would the resolution of the images from each telescope compare? the wavelength of visible light is several hundred nanometers (1 nanometer

Answers

The resolution of the images produced by the visible light telescope will be higher than that of the radio telescope, due to the difference in wavelength.

When there were two telescopes with the same diameter, but one is a visible light telescope and the other a radio telescope, the resolution of the images from each telescope would be different. The wavelength of visible light is several hundred nanometers (1 nanometer = 10−9 meters), while the wavelength of radio waves is much longer, typically on the order of meters or centimeters.

Hence, we can compare the resolution of visible light and radio telescopes. This means that the visible light telescope will be able to resolve more details, since it can detect smaller details due to its smaller wavelength.

Radio telescopes have a lower resolution compared to visible light telescopes because of their longer wavelength. The resolution of an optical telescope is limited by the size of its aperture. The smaller the aperture, the more diffracted the image. As the aperture size grows, the resolving power of the instrument improves.

The same is not true of radio telescopes because their wavelength is so much longer than visible light. The aperture size of a radio telescope would have to be several kilometers in diameter to achieve the same resolution as a visible light telescope of the same size. This is why radio telescopes are usually much larger than optical telescopes.

Learn more about Telescope:

https://brainly.com/question/28638720

#SPJ11

A fundamental frequency

Answers

The lowest frequency that a vibrating object or system can produce is referred to as a fundamental frequency. As the first harmonic frequency, it has another name.

How are fundamental frequencies determined?

The vocal folds' fundamental frequency reflects their rate of vibration. It can be measured in cycles per second or hertz (Hz). Male conversational fundamental frequencies often vary from 100 to 150 Hz, while female fundamental frequencies typically range from 180 to 250 Hz.

Explain about the fundamental frequency?

It is the frequency at which the object or system naturally tends to vibrate when set into motion. The fundamental frequency is also known as the first harmonic frequency, and it is the primary pitch of a sound wave. In musical instruments, the fundamental frequency determines the perceived pitch or note of the sound, while the overtones or harmonics (which are integer multiples of the fundamental frequency) contribute to the timbre or quality of the sound.

To know more about the frequency visit:

https://brainly.com/question/31045817

#SPJ1

Complete question;- What is a fundamental frequency?

to what maximum height, in meters above the compressed position of the spring, can a child jump with the stick using only the maximum elastic potential energy in the spring, if the child and stick have a combined mass of 38 kg?

Answers

Answer:

To solve this problem, we can use the conservation of energy principle which states that the total energy in a system remains constant. At the maximum height, all of the elastic potential energy stored in the spring will be converted into gravitational potential energy.

The elastic potential energy stored in the spring can be calculated using the formula:

Ee = (1/2)kx^2

where Ee is the elastic potential energy, k is the spring constant, and x is the displacement of the spring from its equilibrium position.

We can determine the spring constant by using Hooke's law, which states that the force exerted by a spring is proportional to its displacement from the equilibrium position:

F = -kx

where F is the force exerted by the spring and x is the displacement.

We can rearrange this equation to get:

k = -F/x

where F is the force exerted by the spring when it is compressed and x is the displacement.

Assuming that the spring is compressed by 0.5 meters and exerts a force of 200 N, we can calculate the spring constant as follows:

k = -200 N / 0.5 m = -400 N/m

Now we can calculate the maximum height that the child can jump using the maximum elastic potential energy stored in the spring:

Ee = Eg

(1/2)kx^2 = mgh

where Eg is the gravitational potential energy, m is the mass of the child and stick, and h is the maximum height.

We can rearrange this equation to solve for h:

h = (1/2)kx^2 / mg

Substituting the values we have:

h = (1/2)(-400 N/m)(0.5 m)^2 / (38 kg)(9.81 m/s^2)

h = 0.255 m

Therefore, the child can jump to a maximum height of 0.255 meters above the compressed position of the spring using only the maximum elastic potential energy in the spring.

(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)

A very long, uniformly charged cylinder has radius R and linear charge density λ.
- A) Find the cylinder's electric field strength outside the cylinder, r≥R. Give your answer as a multiple of λ/ε0.
- B) Find the cylinder's electric field strength inside the cylinder, r≤R. Give your answer as a multiple of λ/ε0.
Express your answers in terms of some or all of the variables R, r, and the constant π.

Answers

A very long, uniformly charged cylinder has radius R and linear charge density λ. The cylinder's electric field strength outside the cylinder (r≥R) is given by E = λ/(2πε0r) (where ε0 is the permittivity of free space) and inside the cylinder (r≤R) is given by E = λr/(2πε0R²).

Given:

Radius of the cylinder, RLinear charge density, λ

To find:

Electric field strength outside the cylinder (r≥R)Electric field strength inside the cylinder (r≤R)Electric field strength outside the cylinder (r≥R)

The cylinder is very long, so it can be considered an infinitely long cylinder. Thus, the electric field lines are perpendicular to the cylindrical surface of radius R and the magnitude of the electric field E is given by Gauss's law.

Using Gauss's law for the cylindrical surface, we get:

E2πrl = λ/ε0

Where,

l is the length of the cylinder.

Rearranging this equation, we get:

E = λ/(2πε0r)

Electric field strength inside the cylinder (r≤R)

Using Gauss's law for a cylindrical surface of radius r (r ≤ R) inside the cylinder, we get:

E(2πrl) = λr/ε0R²

Rearranging this equation, we get:

E = λr/(2πε0R²)

Hence, the electric field strength outside the cylinder (r≥R) is given by E = λ/(2πε0r) and inside the cylinder (r≤R) is given by E = λr/(2πε0R²).

Learn more about Gauss's law: https://brainly.com/question/30544041

#SPJ11

a current of 6.09 a in a solenoid of length 14.8 cm creates a 0.203 t magnetic field at the center of the solenoid. how many turns does this solenoid contain?

Answers

The solenoid contains approximately 259 turns.

The magnetic field produced by a solenoid is directly proportional to the current passing through it and the number of turns in the solenoid. The formula for the magnetic field produced by a solenoid is given as B = μ₀nI, where B is the magnetic field, μ₀ is the permeability of free space, n is the number of turns per unit length, and I is the current passing through the solenoid.

We are given that the current passing through the solenoid is 6.09 A, the length of the solenoid is 14.8 cm, and the magnetic field produced at the center of the solenoid is 0.203 T. We can use these values to calculate the number of turns in the solenoid as follows:

B = μ₀nI

n = B/(μ₀I)

Substituting the given values, we get:

n = (0.203 T)/(4π×10⁻⁷ T·m/A × 6.09 A × 0.148 m)

n ≈ 259 turns

Therefore, the solenoid contains approximately 259 turns.

To know more about solenoid, refer here:

https://brainly.com/question/22043434#

#SPJ11

a car of mass 1147 kg (including the driver) turns to the right on a circular arc on flat pavement. if the distance around the quarter circle is 43.6 m and the speed was 13.6 m/s, find the centripetal acceleration and the static friction force on the car tires.

Answers

The centripetal acceleration of the car tires is 17.01 m/s². The static friction force on the car tires is 11242.6 μs N

Given,

Mass of car (m) = 1147 kg

Distance around quarter circle (s) = 43.6 m

Speed (v) = 13.6 m/s

The centripetal acceleration is given as

a = v²/r

Where,

v is the velocity of the object around the circle

r is the radius of the circle

Static friction force on the car tires is given by

Ff = μs x N

Where,

μs is the coefficient of static friction

N is the normal force on the object

Steps to calculate Centripetal acceleration

a = v²/rr = s/π = 43.6 m/4 = 10.9 mv = 13.6 m/sa = v²/r = (13.6 m/s)² / 10.9 m= 17.01 m/s²

Therefore, centripetal acceleration is 17.01 m/s².

Steps to calculate the Static Friction force on the car tires

f = μs x N

The normal force N can be calculated by N = mg

where g is the acceleration due to gravity = 9.8 m/s²N = mg = 1147 kg x 9.8 m/s²= 11,242.6 N

Static friction force on the car tires is given by,

Ff = μs x N= μs x (1147 kg x 9.8 m/s²)= 11242.6 μs N

The formula for calculating static friction force on the car tires is

Ff = μs x N.

The normal force N can be determined as follows:

N = mg,

where g is the acceleration due to gravity = 9.8 m/s²N = mg = 1147 kg x 9.8 m/s²= 11,242.6 N

The static friction force on the car tires is:

Ff = μs x N= μs x (1147 kg x 9.8 m/s²)= 11242.6 μs N

To know more about Static friction refer here:

https://brainly.com/question/13000653#

#SPJ11

what would happen to shadows if you were to move the sun farther away from the earth and moon? and what would happen if you moved it closer?

Answers

If you were to move the sun farther away from the earth and moon, shadows would become sharper and more defined. This is because the light rays from the sun would be more parallel, resulting in less scattering and more direct illumination. The shadows would also be longer because the light source is farther away.

If you were to move the sun closer to the earth and moon, shadows would become less defined and more diffuse. This is because the light rays would be less parallel, resulting in more scattering and less direct illumination. The shadows would also be shorter because the light source is closer.

Answer:

If the sun were moved farther away from the Earth and Moon, the shadows would become sharper and darker because the Sun's light would be more direct and less scattered. This would result in more defined shadows with less ambient light to soften their edges.

On the other hand, if the Sun were moved closer to the Earth and Moon, the shadows would become less defined and lighter because the Sun's light would be less direct and more scattered. This would result in less defined shadows with more ambient light to soften their edges.

However, it's important to note that the position of the sun is not the only factor affecting shadows. Other factors include the size and shape of the object casting the shadow, the position of the observer, and the angle of incidence of the light source.

at what height above the surface of the earth would a satellite be orbiting if it was travelling at 7200 m/s?

Answers

At 7200 m/s, a satellite would be orbiting at an altitude of approximately 28,800 km above the surface of the Earth.

A satellite is a celestial body that orbits around a planet. Satellites have various forms, including the natural moon or an artificial man-made object that orbits a planet, the Sun, or any other astronomical body.

Satellites are classified based on their usage, location, and orbit. Weather forecasting, GPS, communication, military intelligence, remote sensing, and scientific experiments are just a few of the applications in that satellites are utilized.

The formula to calculate the height of a satellite above the earth is as follows:

[tex]R = [ (G*M*T^2) / 4\pi^2 ] ^(\frac{1}{3} ) - R_E[/tex]

Where R = height of the satellite above the earth's surface.

G = universal gravitational constant, M = mass of the Earth, T = orbital period of satellite, [tex]R_E[/tex] = radius of the earth.

The radius of the earth is 6400 km. In meters, this would be 6,400,000 m.

Therefore, the orbital period of the satellite is,

[tex]T = (2*\pi *r) / v[/tex]

Where r = radius of the orbit, v = velocity of the satellite.

[tex]T = (2*\pi *R_E) / v[/tex]

[tex]T= (2*\pi *6,400,000) / 7200[/tex]

[tex]T= 2,206.43 \ s[/tex]

Now, calculate the height of the satellite:

[tex]R = [ (G*M*T^2) / 4\pi ^2 ] ^(\frac{1}{3} - R_E[/tex]

Substituting known values in the above equation

[tex]R= [ (6.67 * 10^(-11) * 5.97 * 10^(24) * (2,206.43)^2) / (4 * \pi ^2) ] ^(\frac{1}{3} ) - 6,400,000[/tex]

[tex]R = 28,800\ km[/tex]

Thus, the satellite would be orbiting at a height of 28,800 km above the surface of the earth if it was traveling at the speed of 7200 m/s.

Learn more about satellite at:

https://brainly.com/question/28106901

#SPJ11

Three horizontal forces are applied to a medal ring, as shown. One of the forces is 10N, and the second force is 12N at an angle of 100* from the first. Find the third forces such the ring is in equilibrium (i.e,. the sum of the three forces is zero)

Answers

Explanation:

Horizontal components:

10 N     +    12 cos (-100) =   + 7.916 N  

Vertical components

0   +    12 sin (-100)  = - 11.818 N

To have equilibrium, the third force must be of the same MAGNITUDE and OPPOSITE direction

   so    Horizontal = - 7.916 N

           Vertical  = + 11.818 N  

Magnitude =  sqrt ( -7.916^2 + 11.818^2 ) = 14.22 N

  at angle   arctan (- 11.818/7.916 ) =   123.8  degrees  

 

measurement of the speed of sound using the flash and report method

Answers

The flash and report method is a simple and common technique used to measure the speed of sound. In this method, an observer measures the time between seeing a flash, such as from a gunshot or a firecracker, and hearing the corresponding sound. The observer is usually at a known distance from the source of the flash and sound.

To perform the experiment, the observer stands at a fixed distance away from the source of the flash and sound. When the flash is seen, they start a stopwatch or use any other timing device. Once they hear the sound, they stop the timer and note the time difference between the flash and the sound. This time difference is the time it takes for the sound to travel from the source to the observer.

The speed of sound can then be calculated using the formula: speed of sound = distance / time taken. The distance between the observer and the source is divided by the time difference recorded to find the speed of sound in the medium (usually air).

It is essential to ensure that the distance between the source and the observer is accurate and that the observer's reaction time is considered when measuring the time difference. External factors such as temperature, humidity, and altitude also affect the speed of sound and should be taken into account.

For more such questions on sound, click on:

https://brainly.com/question/27951129

#SPJ11

The probable question may be:

Discuss the measurement of the speed of sound using the flash and report method?

increasing the kilovoltage on the control panel, with all other exposure factors remaining the same, will result in a film that is: group of answer choices a. overexposed and darker b. underexposed and lighter c. normal exposure and diagnositc d. increasing the kvp does not affect the quality of the film

Answers

Increasing the kilovoltage on the control panel, with all other exposure factors remaining the same, will result in a film that is: "Underexposed and lighter." The correct option is b.

If we increase the kilovoltage on the control panel with all other exposure factors remaining the same, it will result in a film that is underexposed and lighter. The increase in kVp leads to the increase in the penetrating ability of the x-ray beam. It, therefore, increases the number of x-ray photons that reach the film and allows more of the scattered radiation to reach the film.

The underexposure leads to lightening of the image on the film. In addition to this, the increased kilovoltage reduces the contrast of the image. It is due to the fact that the overall density of the image is decreased due to underexposure.

In conclusion, an increase in kVp on the control panel leads to an increase in the number of x-ray photons that reach the film, thereby lightening the image on the film. Also, the image will be underexposed because an increased kilovoltage reduces the contrast of the image. Here, the correct option is b. underexposed and lighter.

For more such questions on X-ray control panel.

https://brainly.com/question/13004206#

#SPJ11

a 2.00 kg mass is attached to a light cord that is wrapped around a pulley of radius 3.80 cm, which turns with negligible friction. the mass falls at a constant acceleration of 2.40 m/s2. find the moment of inertia of the pulley.

Answers

The moment of inertia of the pulley when a 2.00 kg mass is attached to a light cord that is wrapped around a pulley of radius 3.80 cm, which turns with negligible friction and the mass falls at a constant acceleration of 2.40 [tex]m/s^2[/tex] is 4.5472[tex]kgm^2[/tex].

The moment of inertia of a pulley can be calculated using the equation I = [tex]mr^2[/tex], where m is the mass of the pulley and r is its radius. In this example, the mass of the pulley is 2.00 kg and its radius is 3.80 cm. So, the moment of inertia is:

I = [tex](2.00 kg)(3.80 cm)^2[/tex]
  = 4.5472 [tex]kgm^2[/tex]

To understand why this equation works, it helps to consider the concept of rotational inertia. Rotational inertia is the measure of an object's resistance to changes in its rotational velocity. When a mass is attached to a pulley and accelerates downwards, the pulley must resist the pull of the mass, resulting in an increased rotational velocity. The moment of inertia, then, is a measure of how well the pulley is able to resist changes in rotational velocity.

The equation for calculating the moment of inertia assumes that the mass of the pulley is evenly distributed around its circumference. When a pulley accelerates, it creates a centrifugal force, which increases with an increase in the pulley's rotational velocity. In other words, a pulley with a larger moment of inertia will be able to resist a greater centrifugal force.

In this example, the pulley accelerates downwards at a constant acceleration of [tex]2.40 m/s^2[/tex]. The equation for calculating the moment of inertia provides an accurate measurement of the pulley's rotational inertia in this situation, since it takes into account the mass and the radius of the pulley. By substituting the values for the mass and the radius into the equation, we can calculate the moment of inertia of the pulley to be [tex]4.5472 kgm^2[/tex].

For more such questions on Moment of inertia.

https://brainly.com/question/23009906#

#SPJ11

A progressive wave equation is represented by Y = A sin 2π (0. 15t+0. 1x) calculate the period and wavenumber

Answers

The wave's wavenumber equals 0.628 radians per meter.

The given progressive wave equation is represented by Y = A sin 2π(0.15t + 0.1x), where Y is the displacement of the wave at a point in space and time, A is the amplitude of the wave, t is the time, and x is the position of the point along the direction of wave propagation.

The period of a wave is the time it takes for one complete cycle of the wave to occur. In the given equation, the coefficient of t in the argument of the sine function is 0.15. This means that the wave completes one cycle in (1/0.15) = 6.67 seconds.

Therefore, the period of the wave is 6.67 seconds.

The wavenumber of a wave is the number of waves that occur in a given distance. In the given equation, the coefficient of x in the argument of the sine function is 0.1. This means that the wave completes one cycle in a distance of (1/0.1) = 10 meters.

Therefore, the wavenumber of the wave is (2π/10) = 0.628 radians per meter.

In summary, the period of the given wave is 6.67 seconds and the wavenumber is 0.628 radians per meter. These values can be used to calculate other properties of the wave, such as its frequency and velocity, using the relevant formulas.

To learn more about progressive wave equation refer to:

brainly.com/question/25699025

#SPJ4

a talented musician can produce a number of overtones on this natural horn. what would be the frequency of the fourth overtone (5th harmonic) produce when the musician is playing a middle c fundamental?

Answers

The frequency of the fourth overtone produced when the musician is playing a middle C fundamental is 1280 Hz. Therefore, the correct option is D.

A natural horn (trumpet with no valves) is similar to a pipe open at both ends. A musician plans to create a fundamental frequency of 256 Hz (middle C) using the horn. A talented musician can produce a number of overtones on this natural horn.

To solve this question, you need to know that the frequency of the fundamental frequency in a pipe open at both ends is given by;

f = (n * v) / (2L)

where, f is the fundamental frequency, n is an integer, v is the speed of sound, and L is the length of the pipe.

Since the question has already given us the frequency, we can rearrange the above equation to obtain the length of the pipe. Therefore,

L = (n * v) / (2f).

Since we are dealing with the fourth overtone, we know that n = 5.

Therefore, the frequency of the fourth overtone is given by;

f4 = 5f = 5 * 256 Hz = 1280 Hz

Hence, the frequency of the fourth overtone produced when the musician is playing a middle C fundamental is 1280 Hz (option D).

Note: The question is incomplete. The complete question probably is: A natural horn (trumpet with no valves) is similar to a pipe open at both ends. A musician plans to create a fundamental frequency of 256 Hz (middle C) using the horn. A talented musician can produce a number of overtones on this natural horn. What would be the frequency of the fourth overtone produce when the musician is playing a middle C fundamental? A) 512 Hz  B) 768 Hz  C) 1024 Hz  D) 1280 Hz  E) 1536 Hz

Learn more about Fundamental frequency:

https://brainly.com/question/31055667

#SPJ11

7. How much time would it take a bowling ball dropped from a helicopter to reach a speed of 55 m/sec?

How far will the ball have fallen in that time?

Answers

Answer:

Approximately [tex]5.61\; {\rm s}[/tex].

Approximately [tex]154\; {\rm m}[/tex].

(Assuming that [tex]g = 9.81\; {\rm m\cdot s^{-2}}[/tex], air resistance on the ball is negligible, and that the helicopter was initially stationary.)

Explanation:

Under the assumptions, acceleration of the ball during the fall would be constantly [tex]a = g = 9.81\; {\rm m\cdot s^{-2}}[/tex].

Let [tex]u[/tex] denote the initial velocity of the ball; [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex] since it is assumed that the helicopter was initially stationary.Let [tex]v[/tex] denote the final velocity of the ball; [tex]v = 55\; {\rm m\cdot s^{-1}}[/tex].

Apply the SUVAT equation [tex]t = (v - u) / a[/tex] to find the time it takes for the velocity of the ball to change from [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex] to [tex]v = 55\; {\rm m\cdot s^{-1}}[/tex]:

[tex]\begin{aligned}t &= \frac{v - u}{a} \\ &= \frac{55 - 0}{9.81}\; {\rm s} \\ &\approx 5.61\; {\rm s}\end{aligned}[/tex].

Apply the SUVAT equation [tex]x = (v^{2} - u^{2}) / (2\, a)[/tex] to find the displacement [tex]x[/tex] of the ball as its velocity change from [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex] to [tex]v = 55\; {\rm m\cdot s^{-1}}[/tex]:

[tex]\begin{aligned}x &= \frac{v^{2} - u^{2}}{2\, a} \\ &= \dfrac{55^{2} - 0^{2}}{2\, (9.81)}\; {\rm m} \\ &\approx 154\; {\rm m}\end{aligned}[/tex].

The drawing shows a hot air balloon. The mass of the balloon is 3000kg. 34000N
What is the weight? What is the resultant force on the balloon?

Answers

Answer:

Weight =29400N

Resultant force = 4600N upwards

Explanation:

The weight of an object is calculated using the formula:

[tex]W = mg[/tex]

where W = weight (N), m = mass (kg) and g = gravitational field strength (N/kg).

Since the hot air balloon has a mass of 3000kg and the field strength of the Earth is 9.8N/kg, the weight of the balloon is:

[tex]3000kg\times 9.8N/kg = 29400N[/tex]

The second part of your question asks about the resultant force of the hot-air balloon. This can be calculated by subtracting the smaller magnitude of force from the larger magnitude. This means the resultant force is:

[tex]34000N-29400N = 4600N[/tex]

Therefore, the hot-air balloon has a resultant force of 4600N upwards.

Hope this helps!!!

What would be a good addition to your community to promote physical activities for people with disabilities?

More pedestrian lights at roadways
Buses equipped with spaces for wheelchairs
More disabled parking spaces at the coffee shops
Accessibility ramps for going into and out of the pool

Answers

Most individuals can live an active life through walking, including those with impairments who can move around through the use of assistance equipment. wheelchair-accessible bus vehicles

Why is accessibility crucial for those who are disabled?

It is acceptable to claim that everyone in society, including those with disability, benefit from accessibility. Enhancing accessibility results in a higher quality of life, as well as more independence and social integration. Also, it promotes improved health and has a variety of cost-saving benefits.

What are a few wheelchair-accessible examples?

While "wheelchair accessible" is a common way to characterise a facility or amenity that helps persons with disabilities, accessibility may also refer to Braille sign, wheelchair access, elevators, sounds at pedestrian crossings, pathway contours, web designing, and other things.

To know more about around visit:

https://brainly.com/question/1807806

#SPJ1

a person who weighs 550 n empties her lungs as much as possible and is then completely immersed in water (of density 1000 kg/m3) while suspended from a harness. her apparent weight is now 21.2 n. what is her density?

Answers

The density of the person is 480.24 kg/m³.

Given,

Mass of the person = m = 550 N

Apparent weight =[tex]F_ a_p_p_a_r_e_n_t[/tex] = 21.2 N

Density of water = р = 1000 kg/m³

We need to find the density of the person.

The formula for the apparent weight of an object when it is immersed in a liquid is given as:

[tex]F_ apparent[/tex][tex]= (m[/tex]р[tex]V)_g[/tex]...…(1)

Where m is the mass of the object, ρ is the density of the liquid, V is the volume of the object and g is the acceleration due to gravity.

Let V be the volume of the person. Then, the weight of the person in air = mg And, the weight of the person in water = [tex]F_ a_p_p_a_r_e_n_t[/tex] = 21.2 N

We know that, Weight of the person in air - Weight of the person in water = Buoyant force = Weight of water displaced by the person[tex]mg - F_ a_p_p_a_r_e_n_t[/tex]

550 - 21.2 = р[tex]V_g[/tex]

528.8 = р[tex]V_g[/tex].......(2)

Dividing both sides of equation (1) and (2), we get:

[tex]F_ a_p_p_a_r_e_n_t[/tex][tex]/m - mg/m[/tex] = [tex](m -[/tex] р[tex]V)_g/m[/tex] = р[tex]V_g/m[/tex]

[tex]F_ a_p_p_a_r_e_n_t[/tex][tex]/m - g =[/tex] р/[tex]V_g[/tex][tex]/m - g[/tex]

[tex]F_ a_p_p_a_r_e_n_t[/tex][tex]m - g =[/tex] р/[tex]V_g[/tex][tex]/m[/tex]

21.2/550 - 9.81 = рVg/550 - 9.81Vg/550 = (21.2/550 - 9.81)/(р).........(3)

We know that, Density = mass/volume => р= m/V => V = m/р

Substituting V in equation (3), we get:

Vg/550 = (21.2/550 - 9.81)/m/рg

V = m/р = (21.2/550 - 9.81)/(1000*9.81)≈ 0.0113 m³

Substituting the value of V in equation (2), we get:528.8 = р(0.0113) (9.81)р = 480.24 kg/m³

Therefore, the density of the person is 480.24 kg/m³.

To know more about Density refer here :

https://brainly.com/question/952755

#SPJ11

Other Questions
A regular hexagon has an apothem measuring 14 cm and an approximate perimeter of 96 cm.A regular hexagon has an apothem with length 14 centimeters and a perimeter of 96 centimeters.What is the approximate area of the hexagon?224 cm2 336 cm2448 cm2672 cm use composition of functions to determine whether f(x) and g(x) are inverse of each other. show all work for full credit.f(x)=4/5 x=1g(x)=5x-5/4 Need this fast help me As the characters look at the family photos, choose oui or non to indicate whether you see or hear each person described.This is the transcript from the video: MICHLE Voici ton espresso.AMINA Merci, Michle. (An incoming e-mail sound is heard from Amina's laptop.)MICHLE Mais, qui c' est? C'est ta sur? Tes parents?AMINA Non, c'est mon ami Cyberhomme.MICHLE Ton ami Cyberhomme? Comment est-il? Est-ce qu'il est beau? Il a les yeux de quelle couleur? Marron ou bleue? Et ses cheveux? Ils sont blonds ou chtains?AMINA Je ne sais pas.MICHLE Toi, tu es timide.AMINA Et toi, tu es curieuse. J'ai besoin de travailler encore un peu. C'est pour mon cours de stylisme.MICHLE Oh, c'est chic!VALRIE Stphane, tu as dix-sept ans. Cette anne, tu passes le bac, mais tu ne travailles pas!STPHANE coute, ce n'est pas vrai, je dteste mes cours, mais je travaille beaucoup. Regarde, mon cahier de chimie, mes livres de franais, ma calculatrice pour le cours de maths, mon dictionnaire anglais-franaisSTPHANE Oh, qu' est-ce que c'est? Ah, oui, les photos de tante Franoise.VALRIE Des photos? Mais o?STPHANE Ici! Amina, on peut regarder des photos de ma tante sur ton ordinateur, s'il te plat?AMINA Oui, bien sr.AMINA Alors, voil vos photos. Qui est-ce?VALRIE Oh, c'est Henri, mon frre an!AMINA Quel ge a-t-il?VALRIE Il a cinquante ans. Il est trs sociable et c'est un trs bon pre. Et a, c'est ma nice Sophie et mon neveu Charles! Regarde, Stphane, tes cousins!STPHANE Je n'aime pas Charles. Il est tellement srieux.VALRIE Il est peut-tre trop srieux, mais, lui, il a son bac!AMINA Et Sophie, qu'elle est jolie!VALRIE Oui, c'est une vraie intellectuelle aussi! Elle a dix-sept ans seulement et elle a dj son bac. Une fille brillante.AMINA Ah, et a, c'est toute la famille, n'est-ce pas?VALRIE Oui, a c'est Henri, sa femme Franoise et leurs enfants: le fils an Bernard, et puis son frre Charles, sa sur Sophie et leur chien Socrate.STPHANE J'aime bien Socrate. Il est vieux, mais il est amusant!VALRIE Et Bernard, il a son bac aussi, et sa mre est trs heureuse.STPHANE Moi, j'ai envie d'habiter avec oncle Henri et tante Franoise. Comme a, pas de problme pour le bac!Later at the caf...STPHANE Pardon, maman. Je suis trs heureux ici avec toi. Ah, au fait Rachid travaille avec moi pour prparer le bac.VALRIE Ah, bon? Rachid est trs intelligent un tudiant srieux.AMINA a, oui, prparer le bac avec Rachid, c'est une ide gniale!VALRIE Oui, c'est vrai. En thorie, c'est une excellente ide. Mais tu prpares le bac avec Rachid, hein? Pas le prochain match de foot!In this episode, you heard the characters: Use family vocabularyVALRIE C 'est Henri, mon frre an!AMINA Quel ge a-t-il?VALRIE Il a cinquante ans. Il est trs sociable et c'est un trs bon pre. Et a, c'est ma nice Sophie et mon neveu Charles! Regarde, Stphane, tes cousins! Use avoir with physical descriptionMICHLE Ton ami Cyberhomme? Comment est-il? Est-ce qu'il est beau? Il a les yeux de quelle couleur? Marron ou bleue? Et ses cheveux? Ils sont blonds ou chtains? Use descriptive adjectivesSTPHANE Pardon, maman. Je suis trs heureux ici avec toi. Ah, au fait Rachid travaille avec moi pour prparer le bac.VALRIE Ah, bon? Rachid est trs intelligent un tudiant srieux.AMINA a, oui, prparer le bac avec Rachid, c'est une ide gniale! And express possessionSTPHANE Oh, et qu'est-ce que c'est? Ah, oui, les photos de tante Franoise.VALRIE Des photos? Mais o?STPHANE Ici! Amina, on peut regarder des photos de ma tante sur ton ordinateur, s'il te plat?Reply oui or non to the following:(1)Stphane's younger cousin, Bernard(2)Valrie's older brother, Henri(3)Valrie's sister-in-law(4)Valrie's sister(5)Stphane's least favorite cousin, Charles(6)Stphane's dog, Socrates(7)Charles' dog, Socrates(8)Franoise's daughter, Sophie(9)Sophie's brother, Bernard(10)Henri's oldest son, Charles assume the prices of cold medicine (per box) are normally distributed with a mean of $12.75 and a standard deviation of $2.15. find the probability that a randomly selected box of cold medicine will cost more than $13. In humans and other mammals, X-inactivation takes place:Question 12 options:a) late in development, with each new cell inheriting the same inactivated X chromosome as its parent cell.b)early in development, with each new cell inheriting the same inactivated X chromosome as its parent cell.c) throughout the lifetime of an organism with each new cell division, both X chromosomes are activated, and one is then inactivated in each new cell.d) early in development, with all maternal X chromosomes being inactivated and cells maintaining active copies of only the paternal X chromosome.e) early in development, with all paternal X chromosomes being inactivated and cells maintaining active copies of only the maternal X chromosome. Katie and Mina both commute to work. Katie's commute on the train takes 10 minutes more than one half as many minutes as Mina's commute by car. It takes Katie 30 minutes to get to work. Write an equation to determine how many minutes it takes Mina to get to work. two airplanes are flying in the air at the same height. airplane a is flying east at 453 mi/h and airplane b is flying north at 508 mi/h. if they are both heading to the same airport, located 7 miles east of airplane a and 8 miles north of airplane b, at what rate is the distance between the airplanes changing? Holding large amounts of bank capital helps prevent bank failures becauseQuestion 6 options:A)it means that the bank has a higher income.B)it makes loans easier to sell.C)it makes it easier to call in loans.D)it can be used to absorb the losses resulting from bad loans.In order to obtain a high return on equity for their stockholders, banks want to:Question 7 options:hold a high amount of equity as reserves in case of deposit outflowshold a low amount of equity to assets to keep the bank smallhold a high amount of equity to assets to minimize interest paymentshold a low amount of equity to assets to spread the profit on fewer stock holdersBank A has $52 in reserves. The bank has given out $490 in loans and has $470 in deposits. The reserve requirement is 10%. The maximum the bank can afford to lose in loan defaults without being insolvent (and going bankrupt) is:Give your answer with NO DECIMALS and no $, comma or other signs.Your Answer:Bank A - balance sheet:ASSETS LIABILITIESReserves $22 Deposits: $190Securities $20 Borrowing $ 20Loans $181 Capital $ 13What is the highest amount below that Bank A can afford to lose on loans without being insolvent?Question 9 options:$3$10$12$22 Please Help!!! Asap. !!!!! what ratio of acid to base is needed to prepare a buffer with a ph = 4.0 using the conjugate pair hcooh/hcoo^-1 (k_a = 1.78 x 10^{-4})?a. [HCOOHI]/IHCOO-] = 1.78b. [HCOOHI]/IHCOO-] = 0.250 c. [HCOOHI]/IHCOO-] = 3.99 d. [HCOOHI]/IHCOO-] = 0.562 15)Writing fractions as decimals3/5= 2. Describe briefly each level of organization of life from organism all the way to thebiosphere. 1. which of the following transformed city life in the late 1800s? select all that apply. (2 points) elevators and skyscrapers electric streetcars automobiles telephones lisa has decided that with the three hours in between classes she can do one of 3 things. she has ranked her choices, from highest to lowest as, (1) hang out with her friends, (2) study economics or (3) take a nap. the opportunity cost of hanging out with her friends is: group of answer choices the value of taking a nap the value of hanging out with her friends. the value of studying economics. the combined value of studying economics and taking a nap. zero since she does not pay her friends to hang out with her. Question1of10Score0Which sentence from the passage best explains why the French gave the American people the Statue of Liberty? The Statue of Liberty is a gift from the French to the American people. It was built in France. It was shipped from Paris to New York in wooden crates. The statue honors the union of France and America against Britain. Frances support helped the American colonies become free from British rule. Please Help What is the top layer of soil made of?parent rockhumustopsoilsubsoil kai is very interested in his neighbor isoke but has anxiety about his attraction to her because his friends would not approve. every time he sees her, he acts very rudely and says mean things despite his intense attraction to her. this is an example of what type of defense mechanism? The data table to the right represents the volumes of a generic soda brand Volumes of soda (oz) 65 80 70 75 70 85 80 75 70 75 65 70 Complete parts (a) through (c) below 508:5 a. Which plot represents a dotplot of the data? 50 60 70 80 9 50 60 70 80 9 Volumes of soda (oz) Volumes of soda (oz) Oc. 50 60 70 80 90 50 60 70 80 9 Volumes of soda (oz) Volumes of soda (oz) b. Does the configuration of the points appear to suggest that the volumes are from a population with a normal distribution? A. Yes, the population appears to have a normal distribution because the dotplot resembles a "bell shape B. No, the population does not appear to have a normal distribution because the frequencies of the volume decrease from left to right. C. No, the population does not appear to have a normal distribution because the dotplot does not resemble a "bell" shape D. Yes, the population appears to have a normal distribution because the frequencies of the volume increase from left to right. c. Are there any outliers? A. Yes, the volumes of 0 oz and 200 oz appear to be outliers because they are far away from the other temperatures O B. No, there does not appear to be any outliers C. Yes, the volume of 50 oz appears to be an outlier because it is far away from the other volumes ( D. Yes, the volume of 70 oz appears to be an outlier because many sodas had this as their volume What was the main way in which a person caught the Black Death? (4 points) a Body contact b Dirty conditions c Flea bites d Moldy food