A truck weighs 25,000 n, and its tires are inflated to a pressure of 200 kpa. what is the total area of the truck’s tires in contact with the road?

The charge that passes through the body during a 10-minute electrophoresis procedure with a current of: 8 mA is 4.8 Coulombs, and the current density value with an electrode area of 150x180 cm² is approximately 0.296 A/m².

The delivery of medicines to a specific organ or tissue in the human body using a direct current is known as electrophoresis. In this case, two oppositely charged plates are applied to the body.

(a) To find the charge that passes through the body during a 10-minute electrophoresis procedure with a current of 8 mA, you can use the formula: Charge (Q) = Current (I) × Time (t). Since the current is given in milliamperes (mA), you'll need to convert it to amperes (A) by dividing by 1,000: 8 mA / 1,000 = 0.008 A.

The time is given in minutes, so convert it to seconds: 10 minutes × 60 seconds/minute = 600 seconds. Now, you can find the charge: Q = 0.008 A × 600 s = 4.8 Coulombs.

(b) To find the current density, you'll need to use the formula: Current Density (J) = Current (I) / Area (A). The electrode area is given as 150 x 180 cm², so you need to convert it to square meters: (150 x 180 cm²) / (10,000 cm²/m²) = 0.027 m². Now you can find the current density: J = 0.008 A / 0.027 m² ≈ 0.296 A/m².

To know more about electrophoresis, refer here:

https://brainly.com/question/28709201#

#SPJ11

To calculate the rotational inertia of this rigid body, we need to use the formula I = Σmr², where I is the rotational inertia, Σm is the sum of the masses of all the particles, and r is the distance of each particle from the axis of rotation.

For part b, the axis of rotation passes through the midpoint of one of the sides and is perpendicular to the plane of the square. This means that the distance of each particle from the axis of rotation is the same, which is the half of the diagonal of the square, given by d/2 = 2.415 m. Thus, the rotational inertia can be calculated as I = 4m(2.415)² = 44.2 kg·m².

For part c, the axis of rotation lies in the plane of the square and passes through two diagonally opposite particles. This means that we need to find the distance of the other two particles from the axis of rotation, which can be calculated using the Pythagorean theorem. The diagonal of the square is given by d = 4.30 m, so the distance of each particle from the axis of rotation is √((d/2)² + (d/2)²) = 3.04 m. Thus, the rotational inertia can be calculated as I = 2m(3.04)² + 2m(2.415)² = 76.8 kg·m².

In summary, the rotational inertia of this rigid body depends on the distribution of the particles and the axis of rotation. For a uniform distribution of particles, the rotational inertia can be calculated using the formula I = Σmr². For part b, where the axis of rotation passes through the midpoint of one of the sides and is perpendicular to the plane of the square, the rotational inertia is 44.2 kg·m².

For part c, where the axis of rotation lies in the plane of the square and passes through two diagonally opposite particles, the rotational inertia is 76.8 kg·m².

To know more about rotational inertia refer here

https://brainly.com/question/22513079#

#SPJ11

The compressibility of a bone is dependent on its material properties and geometry. If the first bone was compressed by 1.0 mm, the second bone will be compressed by 2.0 mm. Answer is 2.0 mm.

Since the second bone has the same cross-sectional area but twice the length as the first, it has twice the volume. Therefore, it would be expected to compress twice as much as the first bone, or 2.0 mm.
Hi! When considering the compression of a bone, we can use Hooke's Law, which states that the deformation (compression) is directly proportional to the applied force and inversely proportional to the material's stiffness.

For the second bone with twice the length, the same force will cause a greater deformation since the stiffness will be lower. Given that the cross-sectional area is the same, the second bone will be compressed by twice the amount of the first bone.

Learn more about compressibility here:-

https://brainly.com/question/14828391

#SPJ11

The direction and magnitude of the three given vectors are:
1. A + B: magnitude = 26.07m, direction = -49.62°
2. A - B: magnitude = 49.56m, direction = 12.84°
3. B - A: magnitude = 49.56m, direction = 191.16°.

To find the direction and magnitude of the given vectors, we can use the trigonometric functions of sine, cosine, and tangent.

1. The vector sum A + B [10.22m, 145.16°]:
To find the magnitude, we use the formula: |A + B| = √(A^2 + B^2 + 2ABcosθ). Plugging in the values, we get |A + B| = √(10.22^2 + 22^2 + 2(10.22)(22)cos(145.16°)) = 26.07m. To find the direction, we use the formula: tanθ = (Bsinθ + Asin(180°-θ))/(Bcosθ + Acos(180°-θ)). Plugging in the values, we get tanθ = (-22sin(145.16°) + 10.22sin(34.84°))/(-22cos(145.16°) - 10.22cos(34.84°)) = -1.23. Therefore, the direction is θ = -49.62° (measured counterclockwise from the positive x-axis).

2. The vector A - B, [49.56m, 157°]:
To find the magnitude, we simply take the absolute value of A - B, which is 49.56m. To find the direction, we can subtract the angle of B from the angle of A, which gives us 12.84° (measured counterclockwise from the positive x-axis).

3. The vector difference B - A, [49.56m, 337°]:
To find the magnitude, we simply take the absolute value of B - A, which is also 49.56m. To find the direction, we can subtract the angle of A from the angle of B, which gives us 191.16° (measured counterclockwise from the positive x-axis).

For more about direction and magnitude:

https://brainly.com/question/3411372

#SPJ11

Elliptical are redder and rounder than spiral galaxies. Option a is correct.

Elliptical galaxies are redder and rounder than spiral galaxies. Elliptical galaxies are so named because they have a shape that ranges from nearly spherical to highly elongated. They are generally redder than spiral galaxies, as they contain an older population of stars that are cooler and emit less blue light.

Spiral galaxies, on the other hand, are typically bluer due to their younger, hotter stars that emit more blue light. Elliptical galaxies also lack the distinctive spiral arms and central bulge of spiral galaxies, making them appear rounder in shape. The correct answer is (a).

To know more about galaxies, here

brainly.com/question/31361315

#SPJ4

It will take approximately 5.54 ms for the potential difference across the capacitor to decrease from 10.0 V to 5.0 V after the switch is closed.

The time constant of the circuit can be calculated using the formula RC, where R is the resistance in the circuit and C is the capacitance of the capacitor. From the diagram, we can see that the resistance in the circuit is 4.00 kΩ and the capacitance of the capacitor is 2.00 μF. Therefore, the time constant of the circuit is:

RC = 4.00 kΩ × 2.00 μF = 8.00 ms

When the switch is closed, the capacitor will start to discharge through the resistor. The rate at which the potential difference across the capacitor decreases is given by:

V = V0 × e^(-t/RC)

Where V is the potential difference across the capacitor at time t, V0 is the initial potential difference across the capacitor (10.0 V in this case), and e is the base of the natural logarithm.

To find the time it takes for the potential difference across the capacitor to decrease to 5.0 V, we can rearrange the equation to:

t = -RC × ln(V/V0)

Substituting the values given, we get:

t = -8.00 ms × ln(5.0 V/10.0 V) = 5.54 ms

To learn more about : decrease
https://brainly.com/question/2073174
#SPJ11

On March 4th, 2022, a significant event occurred involving the moon. A spent rocket booster collided with the lunar surface at a velocity of 6000 mph (miles per hour). The impact of such a collision would have caused a substantial release of energy, resulting in a dramatic event on the moon's surface.

The collision would have caused a powerful explosion, resulting in a crater formation and the ejection of debris in various directions. The size and characteristics of the crater would depend on the mass and velocity of the rocket booster, as well as the composition of the lunar surface.

This event could have significant implications for lunar research and exploration. Scientists and astronomers would be keen to study the impact site and analyze the resulting crater's size, shape, and composition. The study of such impacts provides valuable insights into the moon's geology, surface dynamics, and potential resources.

Furthermore, the event could potentially affect ongoing lunar missions and future plans for lunar exploration. It would serve as a reminder of the need for careful consideration and planning to avoid potential collisions with space debris in order to protect both human-made assets and the natural features of celestial bodies like the moon.

To know more about collision refer here

https://brainly.com/question/13138178#

#SPJ11

The speed of the wave is 16 m/s. And the right option is B. 16 m/s.

Speed is the rate of change of displacement.

To calculate the speed of the wave, we use the formula below

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Learn more about speed here: https://brainly.com/question/24739297

#SPJ1

The frequency of the clock that feeds the counter inside this timer is calculated as 1 kHz.

The frequency of clock that feeds the counter inside this time

                     [tex]f_{t}[/tex] = clock source frequency / 2

                         =  fs / 2

                         =  2/ 2 = 1 kHz

                Time period = 1 / f

                                  = 1 / 1 h = 1 ms

for each count time gap = 1 ms

part 2 :

Because the counter has 16 bits, its counting range is from 0 to (2ⁿ - 1) for up counting

(2ⁿ - 1) to 0   for down counting

for 16 bit for down counting = (2 ¹⁶ - 1) to 0

The larger load value to start down counting = 2¹⁶ - 1

Part 3:

The longest period for  16 bit periodic counter = total count × time base

                       = 2¹⁶ × 1 ms

                       = 65, 536 × 1 ms = 65. 5365

Part 4 :

load value is 999

count value C₁ = 550 for event 1

count value C₂ = 200 for event 2

                 time elapsed       = (C₁ - C₂ )× time base

                                                 = ( 550 - 200) × 1 ms

                                                 = 350 ms

Part 5:

Assume load is 9999 for each cycle that the timer is loaded with before beginning the countdown, which began at = 2000 C

time elapsed = 3 s

total counts required = time elapsed / time base

                                    = 3 s / 1 ms = 3000

However, when the timer reaches zero, it becomes a down count timer and initiates the cycle with a load value of 9999.

Before restart it completes - 2001 including 0

after restart it requires - 999

current value = 9999 - 999

                      = 9000

Learn more about frequency of clock;

brainly.com/question/8895503

#SPJ4

If an object is speeding up, the sign of its velocity and acceleration are the same. Option B is correct.

This means that both velocity and acceleration are positive if the object is moving in the positive direction and negative if the object is moving in the negative direction. Acceleration is defined as the rate of change of velocity over time, so if an object is speeding up, its velocity is increasing over time. This increase in velocity can be positive or negative, depending on the direction of motion, but in either case, the acceleration must be in the same direction as the velocity.

Distance and speed are not inversely proportional in this case, as they can both increase or decrease together when an object is speeding up. The magnitude of velocity and acceleration are not always zero, as they can be positive or negative depending on the direction of motion. Option B is correct.

To know more about the Acceleration, here

https://brainly.com/question/30499732

#SPJ4

The statement that there are no other galaxies in the Universe is completely untrue. Science has shown us that there are countless galaxies in the Universe, each one containing billions of stars, planets, and other celestial bodies. The sheer size of the Universe alone suggests that there must be more galaxies out there.

Our own galaxy, the Milky Way, is just one of many, and we can observe other galaxies through telescopes and other instruments. In fact, astronomers estimate that there may be as many as 2 trillion galaxies in the observable Universe alone.

These galaxies come in many shapes and sizes, and they are spread out across the vast expanse of the Universe. Some are spiral galaxies like the Milky Way, while others are elliptical or irregular in shape. They all contain massive black holes, which play a crucial role in shaping the structure and evolution of the galaxies themselves.

Understanding the presence of other galaxies in the Universe is crucial to our understanding of the origins and evolution of the cosmos. Through ongoing scientific study, we continue to learn more about the structure, dynamics, and properties of these galaxies, shedding new light on the mysteries of the Universe.

To know more about galaxies  refer here

https://brainly.com/question/31361315#

#SPJ11

The number of mole of C that you have, given that that you have 7.77×10²⁴ atoms is 12.90 moles

From the question given above, the following data were obtained:

The number of mole of C can be obtained as illustrated below:

From Avogadro's hypothesis,

6.022×10²³ atoms = 1 mole of C

Therefore,

7.77×10²⁴ atoms = (7.77×10²⁴ atoms 1 mole of C) / 6.022×10²³ atoms

7.77×10²⁴ atoms = 12.90 moles of C

Thus, the number of mole of C is 12.90 moles

Learn more about mole:

https://brainly.com/question/13314627

#SPJ1

In the radioactive decay of tritium (hydrogen-3) to helium-3, a beta particle is involved to ensure that the total numbers of neutrons and protons remain unchanged.

The decay can be represented by the following equation:

¹H₃ (tritium) → ²He₃ (helium-3) + β⁻ (beta particle)

In this process, one neutron from tritium is converted into a proton, forming helium-3, and a beta particle (electron) is emitted to conserve the total number of neutrons and protons.

To learn more about electron, refer below:

https://brainly.com/question/1255220

#SPJ11

The force of gravity will be greater if one object has a larger mass than the other.

Gravity is the force of attraction between two objects with mass. According to Newton's law of gravitation, the force of gravity between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between them.

F = G * (m₁ * m₂) / d²

where:

F = force of gravity

G = gravitational constant (a universal constant)

m₁, m₂ = masses of the two objects

d = distance between the two objects

As we can see from the formula, the force of gravity is directly proportional to the masses of the two objects. Therefore, if one object has a larger mass than the other, the force of gravity between them will be greater.

To know more about force, here

https://brainly.com/question/13191643

#SPJ4

The pressure on the base of the tank is: 4000 Pa when it contains oil weighing 6000 N with a base area of 1.5 m².

Pressure is defined as force per unit area. In this case, the force acting on the base of the tank is the weight of the oil, which is given as 6000 N. The area of the base is 1.5 m². Using the formula for pressure, we can calculate the pressure as:

Pressure = Force / Area

Substituting the given values, we get:

Pressure = 6000 N / 1.5 m² = 4000 Pa

Therefore, the pressure on the base of the tank when it contains oil weighing 6000 N with a base area of 1.5 m² is 4000 Pa.

To know more about pressure, refer here:

https://brainly.com/question/31608709#

#SPJ11

If a cannonball were launched from the surface of Earth at an even faster speed: its motion would be significantly impacted.

As the cannonball's speed increases, it would move forward more quickly, causing the rate at which it falls towards the ground to be countered by its horizontal motion. If the cannonball reaches a critical speed known as the "orbital velocity," it will enter a stable orbit around the Earth. In this state, the cannonball's forward motion will balance the force of gravity, preventing it from falling back to the ground.

Instead, it will continuously travel around the Earth in a circular or elliptical path. If the cannonball were to be launched at an even higher speed, beyond the escape velocity, it would eventually break free from Earth's gravitational pull and continue moving away from our planet, potentially entering into an orbit around another celestial body or traveling through space indefinitely.

To know more about motion, refer here:

https://brainly.com/question/29255792#

#SPJ11

A reservoir functions like a battery by storing potential energy and releasing it when needed.

A reservoir can function like a battery by storing and releasing energy. In a hydroelectric reservoir, potential energy is stored by collecting water in a high altitude area, which can then be released to generate electricity.

Similar to a battery, the energy stored in a reservoir can be charged and discharged as needed.

The charging process occurs when water is pumped uphill using electricity generated by other sources, and the discharge process occurs when the stored water is released to generate electricity during times of high demand.

Learn more about reservoir here: https://brainly.com/question/30544847

#SPJ1

Plugging these values into the formula, we get: angular acceleration = (1.7 m/s2) / (0.0021 m) = 809.52 rad/s2

The angular acceleration of the yo-yo is 809.52 rad/s2.

Hello! I'd be happy to help you with your question. To find the angular acceleration of the yo-yo, we'll need to use the following relationship: linear acceleration = radius × angular acceleration.

Given that the yo-yo has a center shaft radius of 0.21 cm (0.0021 m) and a linear acceleration of 1.7 m/s², we can rearrange the formula to find the angular acceleration:

angular acceleration = linear acceleration / radius

Angular acceleration = (1.7 m/s²) / (0.0021 m)

By calculating this, we get:

Angular acceleration ≈ 809.52 rad/s²

So, the angular acceleration of the yo-yo is approximately 809.52 rad/s².

To learn more about : acceleration

https://brainly.com/question/26408808

#SPJ11

The statement that the earth is accelerating since the direction of its velocity is changing is true, as changes in direction are also changes in velocity, which constitutes acceleration

The statement that the earth is going too fast to accelerate any more is false. This is because acceleration is a change in velocity, which can occur even if the speed is constant.

The statement that the earth is not accelerating since we earthlings do not feel the acceleration is also false, as acceleration is a physical property of an object's motion, independent of perception.

The statement that the earth is not accelerating since its speed is constant is true, as acceleration is defined as a change in velocity, which includes changes in speed or direction.

The statement that the earth has a velocity that is always changing is also true, as its motion around the sun is not perfectly circular and is affected by other celestial bodies.

The statement that the earth cannot accelerate since it is in space is false, as acceleration is a property of motion regardless of the medium in which it occurs.

To lean more about : velocity

https://brainly.com/question/80295

#SPJ11

momentum = 400 kg⋅m/s

we know that the relation between momentum, velocity, and mass is

P = mv

where p is the momentum

m is mass

v is velocity

now putting values we get,

P = 80x5

  = 400 kg⋅m/s

The most suitable instrument for measuring the thickness of a physics book is B. Vernier calipers, as they provide a higher degree of accuracy and precision compared to the other options.

One of the key advantages of Vernier calipers is their ability to provide measurements with a high level of precision. The Vernier scale allows for measurements to be read to a fraction of the smallest division on the main scale, significantly increasing the accuracy of the measurement.

This is especially useful when dealing with objects that have small dimensions or require precise measurements, such as the thickness of a book.

Furthermore, Vernier calipers often have a fine adjustment mechanism that enables the user to ensure a tight fit around the object being measured, minimizing any potential errors due to play or movement. This feature contributes to the overall accuracy of the measurements.

In comparison to other measuring instruments, such as a ruler or a tape measure, Vernier calipers provide a greater level of precision. Rulers, for example, typically have larger increments and are better suited for measuring longer distances rather than small thicknesses.

Tape measures, on the other hand, can be flexible and might not provide the same level of accuracy as Vernier calipers, especially when measuring thin objects.

To learn more about calipers, refer below:

https://brainly.com/question/13522392

#SPJ11

The time that is taken for the radio signal to travel is 5 * 10^-7 s.

The period of a wave is the time it takes for one complete cycle of the wave to pass a given point. In other words, it is the time it takes for the wave to repeat itself. The period is usually denoted by the symbol T and is measured in units of time, such as seconds (s).

We know that the period of the wave is the inverse of the frequency of the wave. We are asked here to find the time taken for the the radio signal to travel from Earth to the spaceship.

Thus we have;

T = f-1

T = 1/2.00 × 10^6

T = 5 * 10^-7 s

Learn more about wave period:https://brainly.com/question/14588679

#SPJ1

Color perception is determined by wavelengths of light, red, green, and blue make colors for objects that emit light. The color we see for objects not emitting light is based on reflected light. Sunglasses and filters change perceived colors by blocking certain wavelengths of light.

Color perception is a complex phenomenon that involves the interaction between light and objects in our environment. The colors that we see are determined by the wavelengths of photons that are reflected or emitted by objects. When light hits an object, some photons are absorbed while others are reflected, and the reflected photons are what we see as color.

For objects that emit light, such as TVs and computer screens, the colors are created by combining just three primary colors: red, green, and blue. By varying the intensity of these three colors, the screen can create a wide range of hues and shades.

For objects that do not emit light, such as colored paper, the color that we see is determined by the wavelengths of light that are reflected by the object. For example, a red piece of paper appears red because it reflects red light and absorbs other wavelengths.

Filters, such as sunglasses, work by selectively blocking certain wavelengths of light. This changes the colors that we perceive, as some colors are absorbed while others are allowed through.

In summary, color perception is based on the wavelengths of photons reflected or emitted by objects. For objects that emit light, colors are created by combining red, green, and blue.

For objects that do not emit light, the color that we see is determined by the wavelengths of light that are reflected. Filters, such as sunglasses, work by selectively blocking certain wavelengths of light to change the colors that we perceive.

To know more about wavelengths refer here:

https://brainly.com/question/10600766#

#SPJ11

The wavelength of violet light in a vacuum is approximately 3.997 x 10^-7 meters, which is equivalent to 399.7 nanometers.

The wavelength of the light in a vacuum can be calculated using the formula λ = c/f, where λ is the wavelength, c is the speed of light in a vacuum (299,792,458 meters per second), and f is the frequency of the light.

Using this formula, we can find the wavelength of the violet light as follows:

λ = c/f
λ = 299,792,458 m/s / 7.5 x 10^14 Hz
λ = 3.997 x 10^-7 meters

Therefore, the wavelength of violet light in a vacuum is approximately 3.997 x 10^-7 meters, which is equivalent to 399.7 nanometers.

In summary, the frequency of violet light is a measure of how fast it oscillates, and its wavelength in a vacuum can be calculated using the speed of light and frequency of the light. Knowing the wavelength of a particular color of light is useful in many fields, including astronomy, physics, and optics.

For more about violet light .

https://brainly.com/question/11879525

#SPJ11

If the entire wire is reshaped from a two turn circle to a one-turn circle in 0.109 s , the magnitude of the induced EMF is 0.626 V.

When a wire loop is moved in a magnetic field, a current is induced in the wire due to Faraday's law of electromagnetic induction. The magnitude of the induced EMF (voltage) is given by the equation:

E = -N(dΦ/dt)

where E is the induced EMF, N is the number of turns in the loop, and dΦ/dt is the rate of change of the magnetic flux through the loop.

In this case, the wire loop has two turns and is initially circular, with a radius of 0.301 m. The magnetic field has a magnitude of 0.169 T and is perpendicular to the plane of the wire loop.

When the wire loop is reshaped to a one-turn circle, the flux through the loop changes. The new flux through the loop is given by:

Φ = B*A

where B is the magnetic field, and A is the area of the loop.

For a circular loop, the area is given by:

A = πr^2

where r is the radius of the loop. Thus, the new flux through the loop is:

Φ = Bπr^2

When the loop is reshaped, the radius changes from 0.301 m to 0.151 m. Thus, the new flux through the loop is:

Φ = (0.169 T)(π(0.151 m)^2) = 0.0342 Wb

The rate of change of the flux is given by:

(dΦ/dt) = ΔΦ/Δt

where ΔΦ is the change in flux and Δt is the time taken for the loop to be reshaped (0.109 s). Thus,

(dΦ/dt) = (0.0342 Wb)/(0.109 s) = 0.313 V/s

Since the wire loop has two turns, the induced EMF is:

E = -N(dΦ/dt) = -(2)(0.313 V/s) = -0.626 V

The negative sign indicates that the induced current flows in a direction that opposes the change in flux.

To learn more about EMF click on,

https://brainly.com/question/31359392

#SPJ4

The correct answer is option C. Chemical.

A chemical reaction is a process in which chemical bonds between atoms are broken and reformed, resulting in the creation of new substances with different properties from the original ones. During a chemical reaction, the atoms of the reactant molecules rearrange themselves to form new products, which can have different physical and chemical properties than the original substances.

Chemical reactions can be classified into different types based on the nature of the reactants and the products formed. For instance, a synthesis reaction is a type of chemical reaction in which two or more substances combine to form a more complex compound, while a decomposition reaction is a reaction in which a compound is broken down into simpler substances.

Chemical reactions are fundamental to many natural and industrial processes, from the production of fuels and materials to the metabolism of living organisms. Understanding the mechanisms and properties of chemical reactions is crucial for many fields of science, including chemistry, biochemistry, and materials science.

In conclusion, a chemical reaction is a process in which substances change to other substances as chemical bonds break and reform. It is a fundamental concept in chemistry and has important applications in many scientific and industrial fields.

Know more about chemical reaction click here:

https://brainly.com/question/29762834

#SPJ11

An airplane and a freight train have the same momentum, but the train's speed is much slower due to its much larger mass. The train's speed is approximately 9.8 km/h. The correct option is B.

The momentum of an object is the product of its mass and velocity. If two objects have the same momentum, their product of mass and velocity will be equal. We can use this principle to determine the speed of the freight train, given the momentum of the airplane.

The momentum of the airplane is:

[tex]p = m \times v[/tex]

[tex]p = 21,700\;kg \times (1,200\;km/h \times 1000\;m/km)[/tex]

p = 26,040,000 kg m/s

Since the momentum of the airplane and the train are equal, we can set their momentum equations equal to each other:

[tex]p = m \times v[/tex]

[tex]26,040,000\;kg\;m/s = 9,600,000\;kg \times v[/tex]

Solving for v, we get:

v = 26,040,000 kg m/s / 9,600,000 kg

v = 2.71 m/s

To convert the velocity from meters per second to kilometers per hour, we multiply by 3.6:

[tex]v = 2.71 m/s \times 3.6\;km/h/m[/tex]

v = 9.8 km/h

Therefore, the speed of the freight train is approximately 9.8 km/h, which is option B.

In summary, the momentum of the airplane is used to determine the velocity of the freight train, which can be calculated using the momentum equation. The velocity of the freight train is found to be approximately 9.8 km/h.

To know more about speed refer here:

https://brainly.com/question/28060745#

#SPJ11

The heat given out by the steam in changing to water without change in temperature 880 kJ. and the heat given out by the water as it cools to the temperature of the ice is 0 kJ.

Temperature is a measure of the amount of thermal energy present in a system. It is measured using a thermometer and is typically expressed using the Celsius, Fahrenheit, or Kelvin scales. Temperature affects how substances react and interact, how fast molecules move, and how quickly chemical reactions take place.

1. The heat given out by the steam in changing to water without change in temperature can be calculated using the equation Q = m x L,
where m is the mass of the steam and L is the specific latent heat of vaporization.
As 0.40 kg of water condenses from the steam, the mass of the steam is 0.40 kg.
The specific latent heat of vaporization of water is 2 200 kJ/kg.
Therefore, the heat given out by the steam in changing to water without change in temperature is 0.40 kg x 2 200 kJ/kg = 880 kJ.

2. The heat given out by the water as it cools to the temperature of the ice can be calculated using the equation Q = m x c x ΔT,
where m is the mass of the water,
c is the specific heat capacity of water, and
ΔT is the change in temperature.
The mass of the water is 0.40 kg.
The specific heat capacity of water is 4.2 kJ/(kg K). The change in temperature is 0℃ - 0℃ = 0 K.
Therefore, the heat given out by the water as it cools to the temperature of the ice is 0.40 kg x 4.2 kJ/(kg K) x 0 K = 0 kJ.

To learn more about temperature
https://brainly.com/question/30015989
#SPJ4

The wavelength of the radio waves is 2.93 meters, which corresponds to option A.

To find the wavelength of a radio wave, we can use the formula:

wavelength = speed of light / frequency

This formula tells us that the wavelength of a radio wave is inversely proportional to its frequency. In other words, if the frequency of a radio wave is high, its wavelength will be shorter, and if its frequency is low, its wavelength will be longer.

In the given question, we are told that a radio station broadcasts signals at a frequency of 102.3 MHz or 1.023 x 10⁸ Hz. We are also given the speed of light in air, which is 2.997 x 10⁸ m/s. Using the above formula, we can calculate the wavelength of these radio waves.

Substituting the values in the formula, we get:

wavelength = 2.997 x 10⁸ m/s / 1.023 x 10⁸ Hz

= 2.93 meters

Option A is correct answer.

To know more about wavelength, here

brainly.com/question/31143857

#SPJ4

There are 0.506 grams in 0.02 moles of Mg

To find the grams of Mg in 0.02 mol, you can use the formula:

grams = moles × molar mass

In this case, moles = 0.02 mol, and the molar mass of Mg = 25.3 g/mol. Plug in the values:

grams = 0.02 mol × 25.3 g/mol

grams = 0.506 g

So, there are 0.506 grams of Mg in 0.02 mol.

Visit https://brainly.com/question/31597231 to learn more about moles

#SPJ11