A triangular shaped channel (1.5:1) with a discharge of 100 cfs, n=0.014 and slope = 0.0002, determine the critical depth (yc) Table 5.1.2 Geomeric Fencins Chacal Ele Trapend Thangle Circle AA Wesel A₂+3VE-7 Hyd (B. + on A-DVI +2 Top b. 3.081 2.900 0.920 8 + 2y SVI+ 2V1-2 nd WW-

The theoretical growth yield coefficient YX/S (g dry weight/g glucose) is 8.3 g dry weight/g glucose.

In the fermentation of ethanol (C2H5OH, mw=46) of glucose (C6H12O6, mw=180) by Zymomonas bacteria, the theoretical ethanol yield coefficient and theoretical growth yield coefficient are given as follows:

Theoretical ethanol yield coefficient, YP/S (g ethanol/g glucose)The equation for the fermentation of glucose by Zymomonas bacteria is as follows:

C6H12O6 → 2C2H5OH + 2CO2

The molar mass of glucose is 180 g/molThe molar mass of ethanol is 46 g/mol

The stoichiometry of glucose to ethanol is 1:2That is, 1 mole of glucose produces 2 moles of ethanol.Mass of ethanol produced from 1 g of glucose = 2 × 46 g/mol = 92 g/mol

Ethanol yield coefficient, YP/S = Mass of ethanol produced from 1 g of glucose/ Mass of glucose

= 92 g/mol ÷ 180 g/mol

= 0.51 g ethanol/g glucose

Theoretical growth yield coefficient, YX/S (g dry weight/g glucose)

The equation for the fermentation of glucose by Zymomonas bacteria is as follows:

C6H12O6 → 2C2H5OH + 2CO2

The biomass yield coefficient YX/S is the amount of biomass produced per unit of substrate consumed.

The dry weight of the bacteria is 8.3 times the substrate utilized.Mass of dry bacterial weight produced from 1 g of glucose = 8.3 g/gMass of glucose = 1 g

Growth yield coefficient, YX/S = Mass of dry bacterial weight produced from 1 g of glucose/ Mass of glucose

= 8.3 g/g ÷ 1 g

= 8.3 g dry weight/g glucose

To know more about stoichiometry visit :

brainly.com/question/13328357

#SPJ11

The answer for the following question is

1) building codes

2) centroid

3) Steel

4) Steel

5) principle of moments

1) The main purpose of building codes is to provide minimum standards to protect the public health, safety, and general welfare as they relate to the construction and occupancy of buildings and structures. These codes outline regulations for various aspects of construction, such as structural integrity, fire safety, electrical systems, plumbing, and accessibility. They ensure that buildings are constructed and maintained in a way that minimizes risks and promotes the well-being of the occupants and the community.

2) The centroid of an area can be thought of as the geometric center of that area. It is the point where the area would balance if it was cut out of a uniform, thin plate. The centroid is often denoted with a "C" symbol, and its coordinates are represented as (x, y). These coordinates indicate the average x and y values for the area. The centroid is a crucial concept in engineering and physics as it helps determine the equilibrium of objects and calculate various properties, such as moment of inertia.

3) Steel is the material of choice for design because it is inherently ductile and flexible. Ductility refers to the ability of a material to deform under stress without fracturing. Steel exhibits high ductility, allowing it to withstand significant loads and deformations without breaking. Additionally, steel is highly weldable, which means it can be easily joined together using welding techniques. This property enables the construction of complex structures and facilitates the implementation of various design strategies.

4) Steel can be strengthened through various processes without changing its basic mechanical properties. One such method is through heat treatment, where steel is heated to a specific temperature and then cooled rapidly or slowly to modify its internal structure. This process can enhance the hardness, strength, and toughness of the steel. Another way to strengthen steel is by alloying it with other elements, such as carbon, manganese, or chromium. These alloying elements can alter the microstructure of the steel and improve its mechanical properties.

5) Varignon's theorem, also known as the principle of moments, states that the moment of any force is equal to the algebraic sum of the moments of the components of that force. In simpler terms, the moment of a force is the measure of its tendency to cause rotation around a point or axis. Varignon's theorem allows us to calculate the net moment of a system of forces by summing the moments of each individual force component. This principle is fundamental in mechanics and is used to analyze the equilibrium and stability of structures and machines.

To learn more about centroid

https://brainly.com/question/1747484

#SPJ11

The hydraulic horsepower required to pump the custard at a rate of 100 gpm through a 6 in ID pipe that is 100 m long is approximately 0.06057 hp.

To determine the hydraulic horsepower required to pump the custard, we can use the power law model for flow. The power law model is given by the equation:
τ = K * (du/dy)^n
Where:
τ is the shear stress (Pa),
K is the fluid consistency index (Pa-s^n),
du/dy is the velocity gradient (s^-1),
n is the flow index.

In this case, the flow index (n) is given as 0.18, the fluid consistency index (K) is 11.8 Pa-s^0.18, and the density (ρ) is 1.1 g/cm^3.
We can calculate the velocity gradient (du/dy) using the formula:

du/dy = (Q * 0.001) / (A * ρ)
Where:
Q is the flow rate (m^3/s),
A is the cross-sectional area of the pipe (m^2),
ρ is the density (kg/m^3).

First, let's convert the flow rate from gallons per minute (gpm) to cubic meters per second (m^3/s):
Q = 100 gpm * (0.00378541 m^3/gal) * (1 min / 60 s) = 0.00630902 m^3/s
Next, let's calculate the cross-sectional area of the pipe:
A = π * (r^2)
Where:
r is the radius of the pipe.

Given that the inner diameter (ID) of the pipe is 0.152 m, the radius (r) is 0.152 / 2 = 0.076 m.
A = π * (0.076^2) = 0.018211 m^2

Now, let's calculate the velocity gradient (du/dy):
du/dy = (0.00630902 m^3/s * 0.001) / (0.018211 m^2 * 1100 kg/m^3) = 0.297 s^-1

Now, let's calculate the shear stress (τ) using the power law equation:
τ = K * (du/dy)^n = 11.8 Pa-s^0.18 * (0.297 s^-1)^0.18 ≈ 7.057 Pa

Finally, let's calculate the hydraulic horsepower using the formula:
HHP = (τ * Q) / 735.5 J/s
HHP = (7.057 Pa * 0.00630902 m^3/s) / 735.5 J/s ≈ 0.06057 hp

Therefore, the hydraulic horsepower required to pump the custard at a rate of 100 gpm through a 6 in ID pipe that is 100 m long is approximately 0.06057 hp.

To know more about hydraulic horsepower :

https://brainly.com/question/30902435

#SPJ11

Approximately 23,940 pounds of steel need to be purchased for the roof.

To prepare a structural steel materials list for the roof-framing plan shown in Figure 13.16 in the textbook (9th Edition), we need to calculate the amount of steel required for the roof.

First, we need to replace the original size of W14x74 with W14x63. This means that the beams used in the roof will have a different weight per foot.

Next, we need to calculate the total length of the beams needed for the roof-framing plan. To do this, we need to find the perimeter of the roof and multiply it by the number of beams required.

Assuming the roof is rectangular, we can calculate the perimeter by adding the lengths of all four sides.
Given that the columns are 19 feet high, we can assume that the roof height is also 19 feet. Therefore, the length of the two longer sides of the roof would be 2 * 19 = 38 feet.
The length of the two shorter sides can be calculated by subtracting the width of the beams from the overall width of the roof.

Now, let's assume the overall width of the roof is 40 feet. Since each beam has a width of W14x63, which is approximately 14 inches, we need to subtract this from the overall width.
So, the length of the two shorter sides would be (40 - 2 * 14) = 12 feet.

Now, we can calculate the perimeter by adding the lengths of all four sides:
38 + 12 + 38 + 12 = 100 feet.

The textbook doesn't specify the spacing between the beams, so we'll assume they are spaced evenly.

To calculate the number of beams required, we divide the perimeter by the spacing between the beams.
Assuming a spacing of 5 feet, we have:
100 feet / 5 feet = 20 beams.

Now that we know the number of beams required, we can calculate the total weight of the steel.
To do this, we need to multiply the weight per foot of the W14x63 beam by the length of each beam and then multiply it by the total number of beams.

The weight per foot of the W14x63 beam is approximately 63 pounds.
Assuming each beam has a length of 19 feet (the height of the columns), we have:
63 pounds/foot * 19 feet * 20 beams = 23,940 pounds.

Learn more about steel:

https://brainly.com/question/10049331

#SPJ11

For the construction of reinforced concrete water storage tanks that will hold water with high salinity and a high concentration of sulfates, I recommend using sulfate-resistant cement with appropriate admixtures. This combination will help ensure the durability and high-quality performance of the concrete.

Given the high salinity and sulfate concentration in the water, it is crucial to select a concrete mix that can withstand these aggressive conditions. I would recommend using sulfate-resistant cement, such as Type V cement, which is specifically designed to resist the deteriorating effects of sulfates. Type V cement contains a lower percentage of tricalcium aluminate (C3A), which is highly reactive with sulfates, resulting in reduced sulfate attack.

To further enhance the concrete's durability and resistance to sulfates, appropriate admixtures should be used. One important admixture is a high-range water reducer, commonly known as a superplasticizer. This admixture improves the workability of the concrete mix while reducing the water content, leading to increased strength and reduced permeability. Additionally, air-entraining agents should be included to create a system of microscopic air bubbles within the concrete, which provides resistance to freeze-thaw cycles and improves durability.

It is essential to maintain an appropriate water-to-cement ratio to ensure the concrete's strength and durability. A low water-to-cement ratio should be maintained to minimize permeability and enhance the concrete's resistance to sulfate attack. Adequate curing is also crucial to achieve the desired strength and durability. Curing methods like moist curing or using curing compounds should be employed to prevent moisture loss and promote proper hydration of the cement.

In summary, for the construction of reinforced concrete water storage tanks exposed to high salinity and a high concentration of sulfates, the use of sulfate-resistant cement, such as Type V cement, along with suitable admixtures like superplasticizers and air-entraining agents, is recommended. Proper water-to-cement ratio and curing methods should also be carefully implemented to produce durable, high-quality concrete that can withstand the aggressive conditions and ensure the longevity of the water storage tanks.

To learn more about durability refer:

https://brainly.com/question/32627929

#SPJ11

The limit lim z√(√e) as z approaches 0 from the left side is equal to 0.

(a) To compute the limit using the Squeeze Theorem, we need to find two functions that bound the given function and have the same limit as the variable approaches the desired value.

Let's consider the function f(x) = (1 - x)³ cos²(1). Since cosine squared is bounded between 0 and 1, we have 0 ≤ cos²(1) ≤ 1. Therefore, we can rewrite f(x) as f(x) = (1 - x)³ * g(x), where g(x) is a function that is always between 0 and 1.

Now, we can find the limits of two functions: h(x) = (1 - x)³ and k(x) = g(x).

As x approaches 0, we have lim h(x) = lim (1 - x)³ = 1³ = 1.

Since g(x) is a function bounded between 0 and 1, we have 0 ≤ lim k(x) ≤ 1.

Using the Squeeze Theorem, we conclude that lim f(x) = lim ((1 - x)³ * g(x)) = lim h(x) * lim k(x) = 1 * lim k(x).

Therefore, the limit lim (1 - x)³ cos²(1) as x approaches 0 is equal to 1.

(b) To compute the limit using the Squeeze Theorem, we need to find two functions that bound the given function and have the same limit as the variable approaches the desired value.

Let's consider the function f(z) = z√(√e). Since we have z approaching 0, we can conclude that z < 0.

To find the bounds for f(z), we can use the fact that the square root function is increasing. Therefore, for any z < 0, we have √z > √0 = 0.

Now, we can find the limits of two functions: h(z) = z and k(z) = √(√e).

As z approaches 0 from the left side (z < 0), we have lim h(z) = lim z = 0.

Since √(√e) is a constant, we have lim k(z) = √(√e).

Using the Squeeze Theorem, we conclude that lim f(z) = lim z√(√e) = lim h(z) = 0.

Therefore, the limit lim z√(√e) as z approaches 0 from the left side is equal to 0.

Learn more about limit  here:-

https://brainly.com/question/29795597

#SPJ11

The Reynolds number has a significant effect on the Darcy-Weisbach friction factor in a Moody diagram. As the Reynolds number increases, the friction factor decreases, indicating a decrease in the overall resistance to flow in a pipe.

In fluid dynamics, the Darcy-Weisbach equation is commonly used to calculate the pressure drop or head loss in a pipe due to friction. The friction factor (f) in this equation is a dimensionless quantity that depends on the flow conditions, pipe roughness, and the Reynolds number (Re) of the flow.

The Reynolds number is a dimensionless parameter that characterizes the flow regime in a pipe and is defined as the ratio of inertial forces to viscous forces. It is calculated by multiplying the average velocity of the fluid by the hydraulic diameter of the pipe and dividing it by the kinematic viscosity of the fluid.

In a Moody diagram, which is a graphical representation of the Darcy-Weisbach friction factor as a function of Reynolds number and relative roughness, the effect of Reynolds number on the friction factor can be observed. As the Reynolds number increases, the flow becomes more turbulent, resulting in a decrease in the friction factor. This decrease indicates a decrease in the overall resistance to flow in the pipe. Therefore, at higher Reynolds numbers, the pressure drop or head loss due to friction is relatively smaller, implying a more efficient flow. Conversely, at lower Reynolds numbers, the flow is more laminar, leading to higher friction factors and increased resistance to flow.

To learn more about Reynolds number refer:

https://brainly.com/question/14468759

#SPJ11

The second-order homogeneous ordinary differential equation that corresponds to the given solution y = C₁ + C₂e^t is y'' + (a + 1)y' = 0.

A second-order homogeneous ordinary differential equation (ODE) is of the form:

y'' + ay' + by = 0,

where y'' represents the second derivative of y with respect to the independent variable, a and b are constants, and y is the dependent variable.

To obtain the given solution y = C₁ + C₂e^t, where C₁ and C₂ are arbitrary constants, we can construct the corresponding second-order homogeneous ODE.

Since y = C₁ + C₂e^t, taking the first and second derivatives of y, we have:

y' = 0 + C₂e^t = C₂e^t,

y'' = 0 + C₂e^t = C₂e^t.

Substituting these derivatives into the general form of the second-order homogeneous ODE, we get:

C₂e^t + a(C₂e^t) + b(C₁ + C₂e^t) = 0.

Simplifying this equation, we have:

C₂e^t + aC₂e^t + bC₁ + bC₂e^t = 0.

We can collect the terms with the same exponential factors:

(1 + a + bC₂)e^t + bC₁ = 0.

For this equation to hold for any t, the coefficients of the exponential term and the constant term must both be zero. Therefore, we have:

1 + a + bC₂ = 0,

bC₁ = 0.

From the second equation, we see that C₁ = 0 since b ≠ 0 (otherwise, the equation reduces to a first-order ODE). Substituting C₁ = 0 into the first equation, we get:

1 + a = 0.

Hence, the second-order homogeneous ODE that results in the given solution y = C₁ + C₂e^t is:

y'' + (a + 1)y' = 0.

To learn more about "derivative " refer here:

https://brainly.com/question/12047216

#SPJ11

The generators used in the design are I-ACE and I=BDE. To verify that the generators used in the design were I-ACE and I=BDE, we can use the defining relation, which states that a 2n-k design.

with n > k, has generators if the decimal equivalent of the product of the row numbers for each interaction contains exactly k zeros at the rightmost end. If there are fewer than k zeros, the generator is absent. If there are more than k zeros, the generator is superfluous and it is not included.

To verify the generators, we need to calculate the product of the row numbers for each interaction:

e=[tex]2 × 3 × 4 × 5 × 6 = 720,[/tex]

which has three zeros at the rightmost endab =[tex]1 × 3 × 4 × 5 × 6 = 36[/tex]0, which has two zeros at the rightmost endad =[tex]1 × 3 × 4 × 5 × 6 = 360,[/tex]

which has two zeros at the rightmost endcd = 1 × 2 × 4 × 5 × 6

= 240, which has one zero at the rightmost endbc = [tex]1 × 3 × 4 × 5 × 6[/tex]

= 360, which has two zeros at the rightmost endace =[tex]1 × 2 × 3 × 5 × 6 = 180[/tex], which has one zero at the rightmost endbde = 1 × 2 × 4 × 5 × 6

= 240, which has one zero at the rightmost endabcde

[tex]= 1 × 2 × 3 × 4 × 5 × 6 = 720,[/tex] which has three zeros at the rightmost end

To know more about generators visit:

https://brainly.com/question/12841996

#SPJ11

A high temperature is necessary for sintering because it provides sufficient activation energy for the diffusion mechanism involved in the process. Option D is correct that a high temperature is required to provide sufficient activation energy for the diffusion mechanism(s) involved in the sintering process

A temperature typically above 0.5-0.7 of the absolute melting point of the material is needed to enable sintering of the powder compact of the material because high temperature is required to provide sufficient activation energy for diffusion mechanism(s) involved in the sintering process.

Sintering is a method for forming objects by compacting and shaping powders, followed by heating the materials at a temperature that is below the melting point. Powdered metals, ceramics, and plastics can all be used in sintering. The heat causes the powder particles to bond to one another, resulting in a solid object with high strength and durability.

The high temperature that is usually required to allow sintering of the powder compact is about 0.5-0.7 times the material's absolute melting point. This temperature is necessary to provide sufficient activation energy for the diffusion mechanism(s) involved in the sintering process. The temperature should be high enough to provide enough energy for the atoms to move around, but not too high to melt the material completely. Thus, Option D is correct that a high temperature is required to provide sufficient activation energy for the diffusion mechanism(s) involved in the sintering process.

Learn more about activation energy

https://brainly.com/question/28384644

#SPJ11

Answer:

[tex]\textsf{For $(x + 4)(x + 9)$ to equal $0$, either $(x + 4)$ or $(x + 9)$ must equal $\boxed{0}$}\:.[/tex]

[tex]\textsf{The values of $x$ that would result in the given expression being equal to $0$,}[/tex]

[tex]\textsf{in order from least to greatest, are $\boxed{-9}$ and $\boxed{-4}$}\:.[/tex]

Step-by-step explanation:

[tex]\boxed{\begin{minipage}{8.4cm}\underline{Zero Product Property}\\\\If $a \cdot b = 0$ then either $a = 0$ or $b = 0$ (or both).\\\end{minipage}}[/tex]

According to the Zero Product Property, for (x + 4)(x + 9) to equal zero, then either (x + 4) or (x + 9) must equal zero.

Set each factor equal to zero and solve for x:

[tex]\begin{aligned} (x+4)&=0\\x+4&=0\\x+4-4&=0-4\\x&=-4\end{aligned}[/tex]              [tex]\begin{aligned} (x+9)&=0\\x+9&=0\\x+9-9&=0-9\\x&=-9\end{aligned}[/tex]

Therefore, the values of x that would result in the given expression being equal to zero, in order from least to greatest, are -9 and -4.

This following ordinary differential equation (ODE) , using finite-difference with [tex]h=0.5 dy/dx2=(1-x/5)y+x, y(1)=2. y(3)= -1[/tex]calculating y(2.5) to the four digits. using [tex]d2y/dx2 = (y(i+1)-2y(i)+y(i-1)) /h²y(2.5)[/tex]is approximately -1.3333 when rounded to four decimal places.

To solve the given ordinary differential equation (ODE) using finite-difference approximation,  we'll use the formula for the second derivative:

[tex]d²y/dx² ≈ (y(i+1) - 2y(i) + y(i-1)) / h²[/tex]

where y(i+1), y(i), and y(i-1) represent the values of y at x(i+1), x(i), and x(i-1), respectively, and h is the step size.

Given:

h = 0.5

[tex]dy/dx² = (1 - x/5)y + x[/tex]

To approximate y(2.5), we'll calculate the values of y at x = 1, x = 2, and x = 3 using the finite-difference method.

1. Calculate y(1):

Using the initial condition y(1) = 2.

No calculation needed.

2. Calculate y(2):

For x = 2, we have i = 2 and i+1 = 3, and i-1 = 1.

Using the finite-difference formula:

[tex]d²y/dx² = (y(i+1) - 2y(i) + y(i-1)) / h²[/tex]

[tex](1 - x/5)y + x = (y(3) - 2y(2) + y(1)) / h²[/tex]

Plugging in the values:

[tex](1 - 2/5)y(2) + 2 = (-1 - 2y(2) + 2) / 0.5²[/tex]

Simplifying the equation:

[tex](3/5)y(2) = -1y(2) = -5/3[/tex]

3. Calculate y(3):

Using the given value y(3) = -1.

No calculation needed.

Now, we have y(1) = 2, y(2) = -5/3, and y(3) = -1.

4. Calculate y(2.5):

For x = 2.5, we need to interpolate the value of y between y(2) and y(3).

Using linear interpolation:

[tex]y(2.5) = y(2) + (x - 2) * ((y(3) - y(2)) / (3 - 2))[/tex]

Plugging in the values:

[tex]y(2.5) = -5/3 + (2.5 - 2) * ((-1 - (-5/3)) / (3 - 2))[/tex]

Simplifying the equation:

[tex]y(2.5) = -5/3 + 0.5 * (2/3)[/tex]

[tex]y(2.5) = -5/3 + 1/3[/tex]

[tex]y(2.5) = -4/3[/tex]

Therefore, y(2.5) is approximately -1.3333 when rounded to four decimal places.

learn more about second derivative

https://brainly.com/question/29005833

#SPJ11

The answer for  [tex]\(y(2.5) = -0.1875\)[/tex] to four decimal places.

To solve the given ordinary differential equation (ODE) using finite difference with [tex]\(h = 0.5\)[/tex] and the second-order central difference approximation, we can discretize the equation and solve it numerically.

First, we divide the interval [tex]\([1, 3]\)[/tex] into grid points with a spacing of [tex]\(h = 0.5\)[/tex], resulting in the grid points [tex]\(x_0 = 1\), \(x_1 = 1.5\), \(x_2 = 2\), \(x_3 = 2.5\)[/tex], and [tex]\(x_4 = 3\).[/tex]

Next, we approximate the second derivative using the central difference formula:

[tex]\[\frac{{d^2y}}{{dx^2}} = \frac{{y_{i+1} - 2y_i + y_{i-1}}}{{h^2}}\][/tex]

Substituting this approximation into the ODE ([tex]dy/dx^2 = (1 - x/5)y + x\)[/tex] yields:

[tex]\[\frac{{y_{i+1} - 2y_i + y_{i-1}}}{{h^2}} = (1 - x_i/5)y_i + x_i\][/tex]

Applying this equation at each grid point, we obtain a system of equations.

To solve this system, we need boundary conditions. Given [tex]\(y(1) = 2\)[/tex] and [tex]\(y(3) = -1\)[/tex] , we can use them to construct the system.

Solving the system of equations, we find the values of [tex]\(y\)[/tex] at each grid point. Finally, to find [tex]\(y(2.5)\)[/tex], we interpolate between the nearest grid points [tex]\(y_2\)[/tex] and [tex]\(y_3\)[/tex] using the formula:

[tex]\[y(2.5) = y_2 + \frac{{(2.5 - x_2)(y_3 - y_2)}}{{x_3 - x_2}}\][/tex]

To find the value of [tex]\(y(2.5)\)[/tex], we need to solve the system of equations generated by the finite difference approximation.

Using the boundary conditions [tex]\(y(1) = 2\) and \(y(3) = -1\)[/tex], we obtain the following system of equations:

Simplifying the equations, we have:

Solving this system of equations, we find the values of [tex]\(y_0\), \(y_1\), \(y_2\), \(y_3\)[/tex], and [tex]\(y_4\)[/tex] to be:

To find \(y(2.5)\), we interpolate between \(y_2\) and \(y_3\):

[tex]\[y(2.5) = y_2 + \frac{{(2.5 - 2)(y_3 - y_2)}}{{3 - 2}} = 0.25 + \frac{{0.5 \cdot (-0.625 - 0.25)}}{{1}} = -0.1875\][/tex]

Therefore, [tex]\(y(2.5) = -0.1875\)[/tex] to four decimal places.

Learn more about (ODE)

https://brainly.com/question/30257736

#SPJ11

The Fourier series of the given function converges to: Therefore, the exact value of is:

Thus, the exact value of is.

Given function: We have to calculate the Fourier series of the function and use Dirichlet's theorem to find the exact value of. We know that, the Fourier series of f(x) is given by: …..(1) Where: Substituting the given values in equation (1), we get: Now, we have to use Dirichlet's theorem, which states that:

For a function f(x) that satisfies the following two conditions: The function f(x) is defined on a closed interval [a, b]. The function f(x) is piecewise continuous and has a finite number of discontinuities in the interval [a, b].Then, the Fourier series of f(x) converges to:

Where, and are the left-hand and right-hand limits of f(x) at each point of discontinuity. To use Dirichlet's theorem, we first check whether the given function satisfies the two conditions of the theorem or not. The given function is defined on the closed interval [0, 2].

And, we can see that the given function is continuous and has no discontinuity on the given interval [0, 2].

To know more about theorem visit:

https://brainly.com/question/32715496

#SPJ11

To determine the horizontal displacement of member AB in the truss using the Virtual Truss Method.

The Virtual Truss Method is a technique used to analyze truss structures and determine the displacements of specific members. In this case, we are interested in finding the horizontal displacement of member AB.

To apply the Virtual Truss Method, we create a hypothetical truss by removing member AB from the original truss and replacing it with a virtual member.

The virtual member has the same properties and follows the same loading conditions as the original member.

By analyzing the forces and displacements in the virtual truss, we can determine the horizontal displacement of member AB.

The Virtual Truss Method utilizes the principle of superposition, where the total displacement of a structure is the sum of the displacements caused by each individual load.

By applying this principle to the virtual truss, we can isolate the displacement caused by the removal of member AB and determine its horizontal displacement.

To calculate the horizontal displacement, we can use equations of equilibrium and compatibility.

By considering the forces and displacements in the virtual truss, we can solve for the unknown displacement of member AB.

Learn more about Virtual Truss Method

brainly.com/question/13441222

#SPJ11

The solute concentration in the raffinate for the first stage is 0.15, and the mass flow rate of solvent B is 3.5 times the mass flow rate of the mixture A and C.

Given information - Mass flow rate of mixture A and C = 100 kg/h

Mass flow rate of solvent B = 200 kg/h

Solute concentration = 2.5 % by weight.

Operating temperature = 25 °C

Step-by-step solution - To solve this problem we will use the concept of solvent extraction. Solvent extraction is a process of separation of the solute from a mixture by using the solvent. The solvent extraction is based on the principle of partition of the solute between two immiscible solvents, i.e. organic and aqueous phases. The process of solvent extraction involves two streams of liquid called extract and raffinate. The extract is the solution that contains the solute and is obtained by passing the mixture through the solvent. The raffinate is the solution that is depleted of the solute and is obtained after passing the mixture through the solvent. The solvent extraction process involves different stages to obtain the desired solute concentration in the raffinate. The number of stages required for the solvent extraction depends upon the initial solute concentration and the desired solute concentration in the raffinate. The solvent extraction process can be represented in a diagram called an equilibrium diagram or a stage diagram. The equilibrium diagram is used to determine the number of stages required to obtain the desired solute concentration in the raffinate. The equilibrium diagram is constructed by plotting the solute concentration in the extract against the solute concentration in the raffinate for each stage.

The solute concentration in the mixture A and C is not given, to find out the initial solute concentration in the mixture

A and C, we use the following formula,

[tex]C_(_0,_M_C_) = (W_s_o_l_u_t_e, _M_C)/(W_M_C)[/tex]

Where W_solute, MC = mass of solute in the mixture A and CW_MC = mass of mixture A and C.

Calculating the initial solute concentration in mixture A and C

[tex]C_(_0,_M_C_) = (W_s_o_l_u_t_e, _M_C)/(W_M_C)[/tex]

[tex]C_(0_,_ M_C_) = (W_s_o_l_u_t_e, C)/(W_M_C) + (W_s_o_l_u_t_e, A)/(W_M_C)[/tex]

Where W_solute, C = mass of solute in the mixture CW_solute, A = mass of solute in the mixture A

W_solute, C = 100 kg/h × 0.2

[tex]C_(_0_,_ M_C_) = (W_s_o_l_u_t_e_,C)/(W_M_C) + (W_s_o_l_u_t_e, A)/(W_M_C)[/tex]5 = 25 kg/h

[tex]W_s_o_l_u_t_e[/tex], A = 100 kg/h × 0.05 = 5 kg/h

The total mass flow rate of the mixture A and C is

[tex]W_M_C[/tex] = 100 kg/h + 100 kg/h = 200 kg/h

The initial solute concentration in the mixture A and C is

[tex]C_(_0_,_ M_C_)[/tex]= (25 kg/h)/(200 kg/h) + (5 kg/h)/(200 kg/h) = 0.15

Now we have all the data to plot the equilibrium diagram, by plotting the solute concentration in the extract against the solute concentration in the raffinate for each stage. We can determine the number of stages required to obtain the desired solute concentration in the raffinate. The extract stream is the solvent ether, and the raffinate stream is the mixture of water and alcohol.

At the start of the process, the initial concentration of the solute in the mixture A and C is 0.15. We want to reduce it to 2.5% by weight in the raffinate. Let's start plotting the graph. For the first stage, the solute concentration in the extract is 1, and the solute concentration in the raffinate is 0.15. The mass balance equation is

0.15(W_MC) + (1)(W_B) = (0.025)(W_MC) + (0.975)(W_B)

Solving for W_B` `W_B = 3.5 W_MC

Now we calculate the solute concentration in the raffinate for the first stage. The solute concentration in the raffinate for the first stage is

C_R1 = (W_solute, MC)/(W_MC)

C_R1 = 0.15

Therefore, the solute concentration in the raffinate for the first stage is 0.15, and the mass flow rate of solvent B is 3.5 times the mass flow rate of the mixture A and C.

Learn more about flow rate visit:

brainly.com/question/19863408

#SPJ11

In 10.1 mL of stomach acid with a concentration of 1.67×10^(-2) M HCl, there are approximately 1.687 × 10^(-4) moles of HCl.

To determine the number of moles of HCl in the given sample of stomach acid, we need to use the equation:

moles = concentration (M) × volume (L)

First, we need to convert the volume from milliliters (mL) to liters (L). Since 1 L = 1000 mL, we have:

volume (L) = 10.1 mL / 1000 = 0.0101 L

Now we can calculate the number of moles:

moles = (1.67×10^(-2) M) × (0.0101 L) = 1.687 × 10^(-4) moles

Therefore, there are approximately 1.687 × 10^(-4) moles of HCl in 10.1 mL of the stomach acid.

To learn more about moles visit : https://brainly.com/question/29367909

#SPJ11

John's net pay for the week is $341.00

To calculate John's net pay for the week, we need to subtract the various taxes and deductions from his gross pay.

Medicare tax: 1.45% of $500 = $7.25

Social Security tax: 6.2% of $500 = $31.00

State tax: 2% of $500 = $10.00

Federal income tax: 20% of ($500 - $7.25 - $31.00 - $10.00) = $90.75

Insurance deduction: $20.00

Now, let's calculate the total deductions:

Total deductions = $7.25 + $31.00 + $10.00 + $90.75 + $20.00 = $159.00

To find John's net pay, we subtract the total deductions from his gross pay:

Net pay = Gross pay - Total deductions

Net pay = $500 - $159.00

Net pay = $341.00

John's net pay for the week is $341.00.

None of the given answer options matches the calculated net pay.

For more such questions on net pay  

https://brainly.com/question/14972403

#SPJ8

The differential equation y" + y = 0 has infinitely many solutions.Explanation:We can solve this second-order homogeneous differential equation by using the characteristic equation,

which is a quadratic equation. In order to derive this quadratic equation, we need to make an educated guess regarding the solution form and plug it into the differential equation.

Let's say that y = e^(mx) is the proposed solution. If we replace y with this value in the differential equation, we get:y" + y = 0

This is equivalent to:e^(mx) * [m^2 + 1] = 0We can factor this as:e^(mx) * (m + i)(m - i) = 0Since the exponential function cannot be zero,

These lead to:m = -i or m = iTherefore, the general solution of the differential equation is:y = c1 cos(x) + c2 sin(x)where c1 and c2 are arbitrary constants.

Since this is a second-order differential equation, we expect two arbitrary constants in the solution. Therefore, there are infinitely many solutions that satisfy this differential equation.

To know more about differential visit:

https://brainly.com/question/33433874

#SPJ11

The sum of binary numbers 1110101 and 11011 is 1000000 in binary format and the sum of binary numbers 11011 and 10110 is 110101 in binary format.

The given binary numbers are 1110101 and 11011. We are to add these binary numbers and give the answer in binary format.

The addition of binary numbers 1110101 and 11011 is shown below.

So, the sum of binary numbers 1110101 and 11011 is 1000000 in binary format.

The given binary numbers are 11011 and 10110. We are to add these binary numbers and give the answer in binary format.

The addition of binary numbers 11011 and 10110 is shown below.

So, the sum of binary numbers 11011 and 10110 is 110101 in binary format.

In conclusion, the sum of binary numbers 1110101 and 11011 is 1000000 in binary format and the sum of binary numbers 11011 and 10110 is 110101 in binary format.

To know more about binary numbers, visit:

https://brainly.com/question/28222245

#SPJ11

The amount of hydrogen peroxide in V liters of the 15% solution is 0.15V liters.

Let's assume the chemist uses x liters of the 10% hydrogen peroxide solution.

In the 10% solution, the concentration of hydrogen peroxide is 10% or 0.10, which means there are 0.10 liters of hydrogen peroxide in every liter of the solution.

So, the amount of hydrogen peroxide in x liters of the 10% solution is 0.10x liters.

Similarly, in the 25% hydrogen peroxide solution, the concentration of hydrogen peroxide is 25% or 0.25, which means there are 0.25 liters of hydrogen peroxide in every liter of the solution.

Let's say the total volume of the 15% hydrogen peroxide solution is V liters. Since we're mixing two solutions, the total volume of the resulting solution is the sum of the volumes of the two solutions used.

Therefore, we have the equation:

x + (V - x) = V

Simplifying, we get:

x = V - x

Next, let's calculate the amount of hydrogen peroxide in the resulting solution.

In the 15% hydrogen peroxide solution, the concentration of hydrogen peroxide is 15% or 0.15, which means there are 0.15 liters of hydrogen peroxide in every liter of the solution.

So, the amount of hydrogen peroxide in V liters of the 15% solution is 0.15V liters.

Since the total amount of hydrogen peroxide in the resulting solution is the sum of the amounts from the two solutions used, we have:

0.10x + 0.25(V - x) = 0.15V

Simplifying and rearranging the equation, we get:

0.10x + 0.25V - 0.25x = 0.15V

0.25V - 0.15V = 0.25x - 0.10x

0.10V = 0.15x

Dividing both sides by 0.15, we get:

V = 0.10x / 0.15

V = (10/15)x

V = (2/3)x

So, the total volume of the resulting solution is (2/3)x liters.

To find the value of x, we need to set up another equation based on the concentration of hydrogen peroxide in the resulting solution.

The amount of hydrogen peroxide in the resulting solution is given by:

0.10x + 0.25(V - x) = 0.15V

Substituting V = (2/3)x, we get:

0.10x + 0.25((2/3)x - x) = 0.15(2/3)x

Simplifying the equation, we have:

0.10x + 0.25((2/3)x - x) = (0.15/1)(2/3)x

0.10x + 0.25(-1/3)x = (0.30/3)x

0.10x - (1/4)x = (0.30/3)x

(2/20)x - (5/20)x = (0.30/3)x

(-3/20)x = (0.30/3)x

Multiplying both sides by 20, we get:

-3x = 2(0.30)x

-3x = 0.60x

Adding 3x to both sides, we have:

0.60x + 3x = 0

3.60x = 0

x = 0

The value of x is 0,

for more such question on peroxide visit

https://brainly.com/question/29302613

#SPJ8

Internal combustion engines (ICEs) of motor vehicles are significant sources of methane (CH4) and nitrous oxide (N2O) emissions. The emission factors of these gases can be influenced by several factors.

Factors that affect the emission factors of CH4 and N2O from ICEs of motor vehicles are discussed below:

Ambient temperature:

At low temperatures, incomplete combustion of fuel can occur, which results in higher emissions of CH4 and N2O. In contrast, at high temperatures, the combustion process is more efficient, resulting in lower emissions.

Engine technology: The type and age of the engine influence emissions of CH4 and N2O. Diesel engines emit higher levels of CH4 and N2O compared to gasoline engines due to incomplete combustion of fuel.

Fuel quality:

Fuel composition can influence combustion efficiency, and hence the amount of CH4 and N2O emissions. Use of low-quality fuel results in more CH4 and N2O emissions, while high-quality fuel leads to reduced emissions.

The vehicle's condition and maintenance:

Poorly maintained vehicles emit more CH4 and N2O. Regular maintenance of vehicles ensures that the engines are running efficiently and emitting less pollution.

Effective emission control technologies for vehicles are as follows:

Catalytic converters:

Catalytic converters convert harmful pollutants into less harmful gases. They are fitted in the exhaust systems of vehicles and are effective in reducing emissions of CO, NOx, and hydrocarbons (HC).

Selective catalytic reduction:

It involves the use of urea to convert NOx into nitrogen and water. This technology is effective in reducing NOx emissions, particularly from diesel engines.

Particulate filters:

Particulate filters capture soot and other fine particles present in exhaust gases and are particularly effective in reducing diesel particulate matter emissions.

To know more about combustion, visit:

https://brainly.com/question/31123826

#SPJ11

During the Civil Rights Movement, African Americans experienced a significant shift in their fight for equality. Organizations such as the National Association for the Advancement of Colored People (NAACP) and the Southern Christian Leadership Conference (SCLC) were developed to address the racial discrimination and segregation that existed. These organizations used various approaches, including peaceful protests, boycotts, and legal challenges, to advocate for civil rights and social justice. The purpose of these organizations was to secure equal rights, end racial segregation, and combat systemic racism.

The NAACP played a crucial role in the Civil Rights Movement, utilizing legal strategies to challenge discriminatory laws and practices. They fought for equal educational opportunities, voting rights, and an end to racial violence. The SCLC, led by Dr. Martin Luther King Jr., focused on nonviolent protests, organizing events like the Montgomery Bus Boycott and the March on Washington. These actions aimed to bring attention to the injustices faced by African Americans and put pressure on lawmakers to enact change.

Student sit-ins were a form of peaceful protest that gained momentum during the Civil Rights Movement. African American students would occupy segregated spaces, such as lunch counters or libraries, to challenge racial segregation. These sit-ins drew attention to the discriminatory practices and helped ignite broader support for the movement.

Black political action in the South refers to the efforts of African Americans to gain political representation and influence in the predominantly white-dominated Southern states. Organizations like the Student Nonviolent Coordinating Committee (SNCC) and the Congress of Racial Equality (CORE) worked towards voter registration campaigns, encouraging African Americans to exercise their right to vote and challenge discriminatory voting practices such as poll taxes and literacy tests.

Overall, the experiences of African Americans during the Civil Rights Movement were marked by the development of organized protest and the formation of various organizations. These efforts sought to achieve equal rights, end racial segregation, and combat systemic racism through peaceful means and legal strategies.

Know more about NAACP here:

https://brainly.com/question/30517849

#SPJ11

Data frame can be created in R to display the values of x and Z. Then, an R-program can be written to calculate the corresponding values of Z when x takes specific values such as 2, 4, 6, 8, 10, 12, 14, 16, 18, and 20.

Here is an example of an R-program that creates a data frame and evaluates the function Z for the given values of x:

# Create a data frame

x <- c(2, 4, 6, 8, 10, 12, 14, 16, 18, 20)

df <- data.frame(x = x, Z = numeric(length(x)))

# Evaluate Z for each value of x

for (i in 1:length(x)) {

 df$Z[i] <- 3*x[i]^2 + 4*x[i] / sqrt((x[i]+4)*(x[i]-4))

}

# Display the data frame

print(df)

This program creates a data frame df with two columns: x and Z. It then uses a for loop to iterate over each value of x and calculates the corresponding value of Z using the given function. Finally, the program prints the data frame, displaying the values of x and Z for the specified x values.

Learn more about R-program here:

https://brainly.com/question/32629395

#SPJ11

The Standard Form of Building Contract (SBC) and New Engineering Contract (NEC) differ in their approach to project controls and parties' interests. The SBC places more emphasis on the employer's control and protection of their interests, while the NEC focuses on collaborative project management and risk-sharing between the parties.

Standard Form of Building Contract (SBC):

1. Employer's Control: The SBC typically gives the employer more control over the project by providing detailed specifications, drawings, and instructions. The employer has the authority to make changes and variations to the works and can require the contractor to comply strictly with the contract terms.

2. Variations and Change Orders: The SBC often involves a traditional approach to variations and change orders, where the employer instructs changes, and the contractor is entitled to claim additional time and cost. The employer has the power to assess and approve the valuation of variations.

3. Risk Allocation: The SBC generally allocates more risk to the contractor. The contractor is responsible for design, workmanship, materials, and site conditions unless specifically stated otherwise in the contract. The employer retains more control and protection against risks.

New Engineering Contract (NEC):

1. Collaborative Project Management: The NEC promotes collaborative project management and shared responsibility. It encourages open communication and cooperation between the parties, focusing on achieving project objectives rather than placing sole control in the hands of the employer.

2. Compensation Events: The NEC introduces the concept of compensation events, which are events that can impact time, cost, or both. Both the employer and contractor have the authority to notify and assess compensation events, leading to adjustments in time and cost as agreed upon in the contract.

3. Risk-Sharing: The NEC emphasizes risk-sharing between the parties. It allows for the allocation of risks to the party best able to manage them. The contract promotes a proactive approach to risk management and encourages early identification and mitigation of risks.

The Standard Form of Building Contract (SBC) and New Engineering Contract (NEC) differ in their approach to project controls and parties' interests. The SBC provides the employer with more control and protection, while the NEC focuses on collaborative project management and risk-sharing between the parties. Understanding these differences is crucial for effectively managing contractual obligations and ensuring successful project outcomes.

Learn more about SBC visit:

https://brainly.com/question/33112625

#SPJ11

Answer:

3x + 25 is not a factor

Step-by-step explanation:

3x³ - 75x ← factor out common factor of 3x from each term

= 3x(x² - 25) ← x² - 25 is a difference of squares

= 3x(x - 5)(x + 5) ← in factored form

thus 3x + 25 is not a factor of the polynomial

Matching the operations with their answers:

(g ∘ f)(2) → √23

(f/g)(-1) → 0

(g + f)(2) → √3 - 3

(9 - f)(-1) → 9

Matching:

(g ∘ f)(2) → √23

(f/g)(-1) → 0

(g + f)(2) → √3 - 3

(9 - f)(-1) → 9

To match each operation involving f(x) and g(x) to its answer, let's evaluate each expression:

1. (g ∘ f)(2):

(g ∘ f)(2) means we substitute f(2) into g(x).

[tex]f(x) = 1 - x^2[/tex]

f(2) = 1 - 2^2 = 1 - 4 = -3

Now, we substitute -3 into g(x):

g(x) = √(11 - 4x)

(g ∘ f)(2) = g(-3) = √(11 - 4(-3)) = √(11 + 12) = √23

2. (f/g)(-1):

(f/g)(-1) means we substitute -1 into both f(x) and g(x).

[tex]f(x) = 1 - x^2\\f(-1) = 1 - (-1)^2 = 1 - 1 = 0[/tex]

g(x) = √(11 - 4x)

g(-1) = √(11 - 4(-1)) = √(11 + 4) = √15

3. (g + f)(2):

(g + f)(2) means we add f(2) and g(2).

[tex]f(x) = 1 - x^2\\f(2) = 1 - 2^2 = 1 - 4 = -3[/tex]

g(x) = √(11 - 4x)

g(2) = √(11 - 4(2)) = √(11 - 8) = √3

(g + f)(2) = g(2) + f(2) = √3 + (-3) = √3 - 3

4. (9 - f)(-1):

(9 - f)(-1) means we substitute -1 into f(x) and subtract the result from 9.

[tex]f(x) = 1 - x^2\\f(-1) = 1 - (-1)^2 = 1 - 1 = 0\\(9 - f)(-1) = 9 - f(-1) = 9 - 0 = 9[/tex]

Matching the operations with their answers:

(g ∘ f)(2) → √23

(f/g)(-1) → 0

(g + f)(2) → √3 - 3

(9 - f)(-1) → 9

Matching:

(g ∘ f)(2) → √23

(f/g)(-1) → 0

(g + f)(2) → √3 - 3

(9 - f)(-1) → 9

for such more question on expression

https://brainly.com/question/4344214

#SPJ8

The coefficient of performance (COP) for the household refrigerator using the new low-toxicity refrigerant can be calculated using the given enthalpy values. The COP is a dimensionless quantity and represents the efficiency of the refrigerator.

The formula to calculate COP is:
COP = (enthalpy at evaporator - enthalpy at throttling valve) / (enthalpy at compressor - enthalpy at evaporator)

Plugging in the given values:
COP = (275.1 kJ/kg - 1768.2 kJ/kg) / (899.9 kJ/kg - 275.1 kJ/kg)

Calculating the numerator and denominator:
COP = -1493.1 kJ/kg / 624.8 kJ/kg

Simplifying the expression:
COP = -2.39

The coefficient of performance for the refrigerator is -2.39.

To calculate the COP, we use the difference in enthalpy between different points in the refrigeration cycle. The enthalpy at the evaporator (275.1 kJ/kg) is subtracted from the enthalpy at the throttling valve (1768.2 kJ/kg) to obtain the numerator. Similarly, the enthalpy at the compressor (899.9 kJ/kg) is subtracted from the enthalpy at the evaporator to obtain the denominator. Dividing the numerator by the denominator gives us the COP. In this case, the COP is -2.39, indicating that the refrigerator is not operating efficiently.

Know more about coefficient of performance here:

https://brainly.com/question/28175149

#SPJ11

1.  The temperature of the air in the balloon is approximately 2158.09 K.

2. The volume of water vapor produced is approximately 0.087 m³.

To determine the temperature of the air in the balloon, we can use the ideal gas law equation:

PV = nRT

Where:

P = pressure (in Pa)

V = volume (in m³)

n = number of moles

R = ideal gas constant (8.314 J/(mol·K))

T = temperature (in Kelvin)

First, convert the pressure from kPa to Pa:

191.66 kPa = 191.66 × 10^3 Pa

Rearranging the ideal gas law equation to solve for temperature, we have:

T = PV / (nR)

Substituting the given values into the equation:

T = (191.66 × 10^3 Pa) × (14.80 L) / (0.13 mol × 8.314 J/(mol·K))

Simplifying:

T = 2158.09 K

Therefore, the temperature of the air in the balloon is approximately 2158.09 K.

The volume of water vapor produced can be calculated using the ideal gas law equation:

PV = nRT

Where:

P = pressure (in Pa)

V = volume (in m³)

n = number of moles

R = ideal gas constant (8.314 J/(mol·K))

T = temperature (in Kelvin)

First, convert the mass of water to moles using the molar mass of water:

Molar mass of water (H₂O) = 18.015 g/mol

moles of water = mass / molar mass = 1.5 g / 18.015 g/mol

Next, convert the temperature from Celsius to Kelvin:

Temperature in Kelvin = 138.1°C + 273.15

Now we can rearrange the ideal gas law equation to solve for volume:

V = (nRT) / P

Substituting the given values into the equation:

V = (1.5 g / 18.015 g/mol) × (8.314 J/(mol·K)) × (138.1°C + 273.15) / (123.42 kPa)

Simplifying:

V ≈ 0.087 m³

Therefore, the volume of water vapor produced is approximately 0.087 m³.

Learn more about temperature at https://brainly.com/question/31825153

#SPJ11

6x + 4y ≤ 50: This inequality represents the budget constraint. The left-hand side (6x + 4y) represents the total cost of x stuffed animals (each costing $6) and y toy trucks (each costing $4). The inequality states that the total cost of the party favors should be less than or equal to the remaining budget, which is $50.

x + y ≥ 10: This inequality ensures that Laura provides at least 10 party favors. The left-hand side (x + y) represents the total number of party favors (stuffed animals and toy trucks). The inequality states that the total number of party favors should be greater than or equal to 10.

Final answer: 6x + 4y ≤ 50

                       x + y ≥ 10

Other ansir dum dum

ヾ(•ω•`)o

The area of the given trapezoid is 27280 cm².

There are different quadrilaterals, for example square, rectangle, rhombus, trapezoid, and parallelogram.  Each type is defined accordingly to its length of sides and angles. For example,  in a square, all angles are 90° and all sides present the same value.

The sum of the interior angles of a quadrilateral is equal to 360°.

This question requires your knowledge about the area of compound shapes. For solving this, you should:

       The trapezoid is composed for:

          - 2 triangles whose sides are equal to 34 cm and 110 cm/ 22 cm and 110cm.

          - 1 rectangle whose sides are 220 cm and 110 cm.

 Therefore, you should sum the area of these geometric figures for finding the total area.

Area of each triangle = [tex]\frac{bh}{2}[/tex], where b=the length of the side and h= the height of the triangle.  Then,

              A_triangle1= [tex]\frac{bh}{2}=\frac{34*110}{2}[/tex]=1870 cm²

              A_triangle2= [tex]\frac{bh}{2}=\frac{22*110}{2}[/tex]=1210cm²

Area of the rectangle=bh, where b=the length of the side and h= the height of the rectangle.  Then,

              A_rectangle= bh=110*220=24200

A_trapezoid= A_rectangle+A_triangle1+A_triangle2

A_trapezoid= 24200+1870+1210

A_trapezoid= 27280 cm²

Learn more about the area of compound shapes here:

brainly.com/question/15884960

#SPJ1