The steps assume that the mirrors and boxes are arranged in a simple, two-dimensional configuration.
The steps to be followedThe steps to be followed are;
Determine the angle of incidence of the beam of light on mirror 1. This can be done by drawing a line perpendicular to the mirror at the point where the beam of light hits the mirror and measuring the angle between this line and the incident beam of light.Use the law of reflection to determine the angle of reflection of the beam of light from mirror 1. This angle will be equal to the angle of incidence.Use the properties of parallel lines and angles to determine the angle of incidence of the beam of light on mirror 2. This can be done by noting that mirror 2 is parallel to mirror 1 and that the angle of incidence of the beam of light on mirror 2 will be equal to the angle of reflection of the beam of light from mirror 1.Use the law of reflection again to determine the angle of reflection of the beam of light from mirror 2. This angle will be equal to the angle of incidence of the beam of light on the likely box.Use the properties of parallel lines and angles again to determine the angle of incidence of the beam of light on each of the boxes in the diagram. The box that has an angle of incidence equal to the angle of reflection of the beam of light from mirror 2 is the likely box where the beam of light will fall.Learn more on reflection of mirror here https://brainly.in/question/54972410
#SPJ1
Which step of the PRICES method is represented by the letter S?
A.
Raise the injured area above the heart.
B.
Stop the activity until the injury is evaluated.
C.
Wrap the injured site to decrease swelling.
D.
Apply a brace or a splint to the area.
What is the force of gravity between two 70.0kg masses that are separated by 2.50m?
Answer:
F = 5.2324 x 10⁻⁸ N
Explanation:
F = G(m₁ · m₂) / r²
where F is the gravitational force, G is the gravitational constant (6.674 x 10⁻¹¹ N·m²/kg²), m1 and m2 are the masses of the two objects, and r is the distance between them.
Plugging in the given values m1 = m2 = 70.0 kg, r = 2.5 m:
F = (6.674 x 10⁻¹¹)(70.0 kg)² / (2.50 m)²
F = 5.2324 x 10⁻⁸ N
Therefore, the gravitational force between the two 70.0 kg masses separated by 2.50 m is approximately 5.2324 x 10⁻⁸ N.
The figure below shows electrons moving along an electric current towards and away from the light bulb.
Electrons traveling along an electric current. Arrow under electrons points right and left both towards and away from the light bulb.
Does this figure show a direct or alternating current? Explain your response.
Based on the information provided, it is likely that the figure shows an alternating current (AC). The arrows under the electrons pointing right and left, both towards and away from the light bulb, indicate that the direction of the electron flow is changing periodically. This is a characteristic of alternating current, where the flow of electric charge reverses direction periodically, typically in a sinusoidal manner.
In an AC circuit, the voltage also changes direction periodically, which is consistent with the changing direction of the electron flow shown in the figure.
In an alternating current, the flow of electrons periodically reverses direction, causing the current to switch between positive and negative values. This is different from direct current (DC), where electrons flow in a single, constant direction.
For more questions on: current
https://brainly.com/question/1100341
#SPJ11
What is the definition of physical activity?
A.
a movement that stimulates your respiratory system
B.
a movement that causes perspiration
C.
a movement that results in the body’s use of energy
D.
a movement that requires little effort
Answer:
C. a movement that results in the bodys use of energy
Economics NCS Topic Test No 5. Perfect Market 1.3. Give ONE term for each of the following descriptions. Write uonly the term next to the question numbers (1.3.1 to 1.3.5) in the ANSWER BOOK. Abbreviations, acronyms and examples will NOT be accepted. 1.3.1 Actual expenditure of business such as wages and interest 1.3.2 The cost that changes as more or less outputs are produced 1.3.3 An institution that can make final decisions by reviewing the decisions of the competition commission and Tribunal. 1.3.4 A word that describe the characteristics of differentiated product in oligopoly or monopolistic competition. 1.3.5 A period when inputs or factors of production are fixed. (5x1) (5) TOTAL SECTION A: [201
1.3.1 - Operating costs
1.3.2 - Variable costs
1.3.3 - Competition Appeal Court
1.3.4 - Product differentiation
1.3.5 - Short run
What is inertia of motion explain one example?
THE INABILITY OF A BODY TO CHANGE ITS STATE OF MOTION BY ITSELF
example : a passenger tends to fall forward when breaks are applied in a busThe tendency of an item to resist a change in its state of motion is referred to as inertia. It specifically refers to an object's resistance to any change in velocity, whether that change be in speed or direction.
What is Inertia ?When you are riding in a car and the driver abruptly stops, you are experiencing inertia of motion. Because of inertia, your body wants to continue going forward at the same pace and in the same direction as before the brakes were applied. You will lean forward as a result, and if you are not wearing a seatbelt, you may be flung forward. Similarly, while the automobile speeds, your body tries to remain at rest owing to inertia, causing you to be motionless. Despite being widely accepted, Aristotle's theory of motion was challenged by prominent philosophers multiple times over the course of roughly two thousand years. For instance, Lucretius claimed that mobility rather than stasis (stagnation) was the "default state" of the matter (following, presumably, Epicurus).
To know more about Inertia :
https://brainly.com/question/3268780
#SPJ5.
Two whistles emit sounds of wavelength 3.2 m and 2.9 m which produce a beat frequency of about? a) 2 hertz b) 3 hertz c) 4 hertz d) 7 hertz e) 11 hertz
Two whistles emitting sound of wavelength 3.2 m and 2.9 m would produce a beat of frequency 11 Hertz, hence option e.
The beat frequency (f_beat) is given by the difference in frequency (f) between the two whistles,
f_beat = |f₁ - f₂ |, frequencies of the two whistles are f₁ and f₂ . The frequencies can be calculated from the wavelengths (λ) using the formula,
f = c/λ, speed of sound in air is c, which is approximately 343 m/s at room temperature and atmospheric pressure. For the first whistle with a wavelength of 3.2 m,
f₁ = c/λ₁
= 343/3.2
= 107.1875 Hz
For the second whistle with a wavelength of 2.9 m,
f₂ = c/λ₂
= 343/2.9
= 118.2759 Hz
The difference in frequency is,
f_beat = |f_1 - f_2|
= |107.1875 - 118.2759| ≈ 11.1 Hz
Therefore, the beat frequency is approximately 11 hertz.
To know more about beat frequency, visit,
https://brainly.com/question/3086912
#SPJ1
What is the natural period of oscillation of your leg when you march? Compute your velocity? Explain your answer; make comments. (Please use formula and explain with your words clearly)
Electric Electronics Engineering course - Vibrations and Titrations
The natural period of oscillation of a leg when marching is the time it takes for one complete cycle of oscillation. It can be calculated using the formula:
T = 2π √(L/g)
What is the oscillation about?Where T is the natural period of oscillation, L is the length of the leg, and g is the acceleration due to gravity (9.81 m/s^2).
Assuming an average leg length of 1 meter, the natural period of oscillation of a leg is:
T = 2π √(1/9.81) ≈ 0.64 seconds
To compute the velocity of the leg during the march, we can use the formula:
v = 2πL/T
where v is the velocity, L is the length of the leg, and T is the natural period of oscillation.
Substituting the values, we get:
v = 2π(1)/(0.64) ≈ 9.8 m/s
Therefore, This means that during the march, the leg moves back and forth with a velocity of approximately 9.8 meters per second. It's important to note that this calculation assumes a simple harmonic motion, which may not be the case in reality due to the complex motion of various joints and muscles involved in marching.
Learn more about oscillation from
https://brainly.com/question/12622728
#SPJ1
Which model of the universe is the most widely accepted, and what does it
predict?
A. An open universe, in which the universe never stops expanding
B. A flat universe, in which the universe stops expanding but does not
contract
C. A closed universe, in which the universe stops expanding but does
not contract
OD. A closed universe, in which the universe never stops expanding
How long will the light take in travelling a distance of 500 m in water refractive index of water is 1.33 and velocity of light in vacuum is 3 × 108 m/s. [2] Ans: 2.2 x 10 s
The light will take 2.2 μs in travelling a distance of 500 m in water refractive index of water is 1.33 and velocity of light in vacuum is 3 × 10⁸ m/s.
When a light is going from medium 1 to medium 2. The refractive index is defined as a ratio of velocity of light in medium 1 to velocity of light in medium 2. Refractive index is the factor which deals with the amount of bending of light. More refractive index means more it will bend in the medium 2. When it is 1 we can say that light has not been bent.
refractive idex of the medium is given by,
μ = velocity of light in vacuum/ velocity of light in medium
velocity of light in water = velocity of light in vacuum/ μ
velocity of light in water = 3 × 10⁸ m/s. / 1.33
velocity of light in water = 2.25 × 10⁸ m/s
Time = distance/velocity
Time = 500 m / 2.25 × 10⁸ m/s
time = 222 × 10⁸ s
time = 2.2 μs
To know more about Refractive index :
https://brainly.com/question/30761100
#SPJ1.
13. List the general strengths and weaknesses of epidemiology for providing an answer to Mary Beth’s question.
14. List the specific strengths and weaknesses of this study.
15. List the general strengths and weaknesses of toxicology for providing an answer to Mary Beth’s question.
The general strengths of epidemiology for providing an answer to Mary Beth’s question.
epidemiology can study a large populationepidemiology can identify patterns and trends in health and diseaseepidemiology can be used to study different diseases and health conditionsThe general weaknesses of epidemiology for providing an answer to Mary Beth’s question:
epidemiology may not provide a definitive answer or explanationepidemiology results may be affected by biases and confounding variablesThe Specific strengths of a study:
Big sample sizeLengthy follow-up periodThe specific weaknesses of a study are :
Use of self-recorded data, which may be inaccurate or biasedBiased selection due to non-random samplingWhat is epidemiology?Epidemiology is described as the study and analysis of the distribution, patterns and determinants of health and disease conditions in a defined population.
The main objective of epidemiology has been said is to find out what causes different health outcomes in different groups of people.
Learn more about epidemiology at:
https://brainly.com/question/29609224
#SPJ1
The Titanic had a mass of 52,800 tonnes and was travelling at 41.74 km/h when
the iceberg was sighted. By the time it hit the iceberg 30 seconds later, it had
slowed to 38.5 km/h
What was the force?
Answer:
Explanation:
mv^2/2/t=712,2kN
A 100-volt electromotive force is applied to an RC-series circuit in which the resistance is 400 ohms and the capacitance is 10−4 farad. Find the charge q(t) on the capacitor if q(0) = 0
And also the current in I(t)
The charge q(t) on the capacitor would be, [tex]q(t)= 0.25c(1-e^{-t/0.04s})[/tex]
And the current I(t) in the circuit will be,[tex]I(t)= 0.25mA(1-e^{-t/0.04s})[/tex]
To find the charge q(t) on the capacitor at any time t, we can use the equation for the charge on a capacitor in an RC circuit:
[tex]q(t)= Q_{max} (1-e^{-t/RC})[/tex]
where Qmax is the maximum charge on the capacitor, R is the resistance, C is the capacitance, and t is time.
To find Qmax, we can use the equation for the maximum charge on a capacitor in an RC circuit:
Qmax = E × C
where E is the electromotive force.
So, we have:
Qmax = 100 V × 10⁻⁴F = 0.01 C
Using the given values of R and C, we have:
R*C = 400 ohms × 10⁻⁴F = 0.04 s
Substituting these values into the equation for q(t), we get:
[tex]q(t)= Q_0.01(1-e^{-t/0.04C})[/tex]
To find the current I(t), we can use Ohm's law and the equation for the charge on a capacitor:
I(t) = (1/R) × d(q(t))/dt
where d(q(t))/dt is the derivative of q(t) with respect to time.
Taking the derivative of q(t), we get:
[tex]dq(t)/dt= 0.01C (1-e^{-t/0.04C})[/tex]
Substituting this into the equation for I(t), we get:
[tex]I(t)= (1/400ohm)(0.01/0.04s) (1-e^{-t/0.04C})[/tex]I
Simplifying, we get:
[tex]I(t)= 0.25mA(1-e^{-t/0.04C})[/tex]
Therefore, the charge q(t) on the capacitor is:
[tex]q(t)= 0.25c(1-e^{-t/0.04s})[/tex]
And the current I(t) in the circuit is:
[tex]I(t)= 0.25mA(1-e^{-t/0.04s})[/tex]
To know more about current
https://brainly.com/question/31277543
#SPJ1
What type of circuit is shown
=When three resistors are connected in parallel, they form a parallel circuit. In a parallel circuit, each resistor is connected across the same two points, with the current split between the resistors.
In this configuration, the voltage across each resistor is the same, but the current through each resistor can be different. The total resistance of the circuit is calculated using the equation:
1/R_total = 1/R1 + 1/R2 + 1/R3
where R1, R2, and R3 are the resistance values of the individual resistors.
The total current in the circuit is equal to the sum of the currents through each resistor:
I_total = I1 + I2 + I3
where I1, I2, and I3 are the currents through each resistor.
The total power dissipated in the circuit can be calculated using the equation:
P_total = V² / R_total
where V is the voltage across the resistors.
In summary, when three resistors are connected in parallel, they form a parallel circuit, with each resistor connected across the same two points, and the current split between them. The total resistance, current, and power dissipated in the circuit can be calculated using the equations provided.
To know more about parallel circuit, visit:
https://brainly.com/question/11409042
#SPJ1
1. solve this!!! pls help
The angle of arc m RNW is 60°, given that M is the center and RE and AN are diameters.
How to calculate arc angle?Since RE and AN are diameters, we know that ∠REO and ∠ANO are right angles, where O is the center of the circle. Since M is also the center of the circle:
m∠RMO = 180° - m∠RMN = 80°
m∠EMO = 180° - m∠EMW = 140°
Since ∠RMO and ∠EMO share a common vertex and their non-common sides are radii of the circle, they are congruent. Therefore:
m∠RMO = m∠EMO
80° = 140° - m∠RNW
m∠RNW = 60°
So m RNW = 60°.
Find out more on circles here: https://brainly.com/question/27825139
#SPJ1
Image transcribed:
10.5.5 Your Turn! HOMEWORK
1. In Circle M, m∠RMN = 100° and m∠EMW = 40°. Calculate m RNW given that M is the center and RE and AN are diameters.
4 A student notices that she gets a shock when she touches a metal door handle she has been charged by walking across a carpet. Would she get a shock if the handle was made of plastic?
Answer:
Not likely
Explanation:
She might feel a slight shock if she touches a plastic door handle after walking across a carpet, but not nearly as much as when she touches a metal handle. This is because plastic is an insulator, which means it does not conduct electricity very well. Metal is an excellent conductor. When the student drags her feet across a carpet, she builds up a negative electric charge on her body. Free electrons are released from the carpet due to friction between the carpet and her shoes, and the electrons collect on the surface of her body. If she touches a metal object like a door handle, the electrons flow from her body to the metal, resulting in a static discharge--a shock. However, if she touches a plastic object, the charge will not flow as easily and she is less likely to feel a shock. The electrons on her body repel the electrons in the metal door knob, leaving the surface of the metal doorknob positively charged, so the electrons jump across a short air gap to the metal door and she feels an electrical shock. This won't happen so dramatically with a plastic handle because the electrons in plastic won't be as easily repelled as in a metal handle.
Four point masses 2kg, 4kg, 6kg and 8kg are placed at the corners of Square ABCD of 2cm long respectively. Find the Position of centre of mass of the system from the corner A.
The position of the center of mass of the system from corner A is 4.3692cm.
To find the position of the center of mass of the system, we need to use the formula:
C.M. = (m1r1 + m2r2 + m3r3 + m4r4)/(m1 + m2 + m3 + m4)
where m1, m2, m3, and m4 are the masses of the four-point masses, and r1, r2, r3, and r4 are the distances of the point masses from the reference point (in this case, corner A).
Let's first find the distances of the four-point masses from corner A. We can see that the distance of the 2kg mass from corner A is 2 cm. The distance of the 4kg mass from corner A is the diagonal of a square of side 2 cm, which is sqrt(22 + 22) = 2.828 cm. Similarly, the distances of the 6kg and 8kg masses from corner A are also 2.828 cm.
Now, let's substitute the values in the formula:
C.M. = (2kg2cm + 4kg2.828cm + 6kg2.828cm + 8kg2.828cm)/(2kg + 4kg + 6kg + 8kg)
C.M. = (4cm + 11.312cm + 16.968cm + 22.624cm)/20kg
C.M. = 1.824cm + 0.5656cm + 0.8484cm + 1.1312cm
C.M. = 4.3692cm
Therefore, the position of the center of mass of the system from corner A is 4.3692cm.
Read more about centre of mass,
https://brainly.com/question/28021242
are physical quantities and fundamental quantities same
Answer:
The physical quantities are the quantities that are the base quantities of the measurement. They are known as the fundamental quantities. The units of those units are known as the fundamental units. The derived physical quantities are dependent on the fundamental quantities.
Why is compound interest more advantageous than simple interest
Compound interest is more advantageous than simple interest because it allows for the accumulation of interest on both the principal amount and the interest earned over time. In simple interest, interest is only earned on the principal amount, while in compound interest, the interest earned is added to the principal amount and then interest is earned on the new, higher amount. This leads to a compounding effect where the interest earned increases over time, resulting in a larger total return on investment. Additionally, compound interest is commonly used for long-term investments such as retirement funds and savings accounts, where the power of compounding can significantly increase the final amount earned.
creation
Design a device to minimize impact from a collision.
Design a device to convert one form of energy to another.
In 2-3 paragraphs explain your design, the materials that would be used to construct it, its function, and the relative efficiency of your design compared to something that already exists and performs a similar function
The device I would design to minimize impact from a collision would be a shock absorber made from a combination of rubber and metal. The device would be installed between the two colliding objects, and its function would be to absorb and dissipate the energy of the collision, thereby reducing the impact forces on the objects.
CONSTRUCTION:
Compared to existing shock-absorbing devices such as airbags and crumple zones, this design would be more efficient in reducing the impact forces on the colliding objects. Unlike airbags and crumple zones, which are designed to absorb the impact forces by deforming, the shock absorber would absorb the impact energy through compression and dissipation of the energy as heat.
Designing a device to convert one form of energy to another:The device I would design to convert one form of energy to another would be a piezoelectric generator. The function of this device would be to convert mechanical energy into electrical energy through the use of piezoelectric materials.The piezoelectric generator would consist of a piezoelectric material such as quartz or lead zirconate titanate (PZT) sandwiched between two metal plates. When mechanical stress is applied to the piezoelectric material, it generates an electrical voltage across the metal plates.Compared to existing devices such as generators and batteries, the piezoelectric generator would be more efficient in converting mechanical energy into electrical energy. This is because the piezoelectric effect is a direct conversion of mechanical energy into electrical energy, without the need for any intermediate steps such as the conversion of mechanical energy into rotational energy in a generator. Additionally, the piezoelectric generator would be smaller and more lightweight than traditional generators, making it ideal for use in portable electronic devices.
can someone please explain Question 1 a and e go to me :) ?
i have the answers. i just don't understand why the answers are what they are.
In the context of a scientific investigation, it is often important to provide accurate measurements. In this particular case, the mass of water used in the investigation is 0.05 kg.
How to calculate the massEnergy transferred = mass × specific heat capacity × temperature change
E = m × c × ΔT
We can rearrange this equation to solve for the mass of water:
m = E / (c × ΔT)
Substituting the given values, we get:
m = 1050 J / (4200 J/kg·°C × 0.6 °C) = 0.05 kg
Therefore, the mass of water used in the investigation is 0.05 kg.
Learn more about mass on
https://brainly.com/question/86444
#SPJ1
Complete the following sentences:
Wave speed is NOT dependent on _________ or ____________. Instead, wave speed only changes when the ______________ changes. This means that if a sound wave is traveling in pure water and the frequency doubles, the wavelength must _________.
How does the frequency of a string affect its wavelength?
Answer:
As the frequency goes down, the speed goes down by the same factor, and so the wavelength doesn't change
Explanation:
The 2001 World Trade Center attacks fall under which category of terrorism?
foreign-sponsored terrorism on U.S. soil
domestic-sponsored terrorism on U.S. soil
cyberwarfare and domestic terrorism
terrorism abroad that affects U.S. citizens
The 2001 World Trade Center attacks fall under which category of terrorism (a).foreign-sponsored terrorism on U.S. soil is correct option.
The 2001 World Trade Center attacks are generally considered to be an example of foreign-sponsored terrorism on U.S. soil. The attacks were carried out by a terrorist organization based in Afghanistan called Al-Qaeda, which was led by Osama bin Laden. The attackers were primarily from Saudi Arabia, but they received training and support from Al-Qaeda operatives based in Afghanistan.
Therefore, the correct option is (a).
To know more about terrorism
https://brainly.com/question/29830276
#SPJ1
A boy of mass 60 kg and a girl of mass 40 kg are together and at rest on a frozen pond and push each other apart. The girl moves in a negative direction with a speed of 3 m/s. What must be the total final momentum of the boy and girl combined?
A. 0 kgm/s
B. -120 kgm/s
C. 120 kgm/s
D. -100 kgm/s
Answer:
Explanation:
The total initial momentum of the system is zero since the boy and girl are at rest initially. According to the law of conservation of momentum, the total final momentum of the system must also be zero.
If the girl moves in a negative direction with a speed of 3 m/s, then she gains a momentum of -3 x 40 = -120 kgm/s in the negative direction. To conserve momentum, the boy must gain a momentum of +120 kgm/s in the positive direction, so that the total momentum of the system remains zero.
Therefore, the total final momentum of the boy and girl combined is 120 kgm/s in the positive direction. The answer is C. 120 kgm/s.
Answer:
The girl acquires a velocity of -3 x 40 = -120 kgm/s in the negative direction if she goes with a speed of 3 m/s in the opposite direction. The boy must acquire a momentum of +120 kgm/s in the positive direction to preserve and keep the system's overall momentum at zero.
Explanation:
The answer is option D
Brainliest please :)
An engine using 1 mol of an ideal gas initially at 18.7 L and 370 K performs a cycle
consisting of four steps:
1) an isothermal expansion at 370 K from
18.7 L to 33 L ;
2) cooling at constant volume to 209 K ;
3) an isothermal compression to its original
volume of 18.7 L; and
4) heating at constant volume to its original
temperature of 370 K .
Find its efficiency. Assume that the
heat capacity is 21 J/K and the universal gas constant is 0.08206 L · atm/mol/K =
8.314 J/mol/K
Which of the rays drawn above would be correct as the light goes from the air into the water? (5 points)
A
B
C
Answer:
First option A
Explanation:
Since the light is passing from air (less dense) into water (more dense), it is bends downwards.
The answer above is wrong because like I mentioned light bends when it goes through a medium and option B doesn't match that, so please don't use that answer.
Hope I helped and have a great day ahead.
Eli is a 9-year-old and his friend has asked him to share his test answers. Eli refuses to let his friend cheat off his paper because he does not want to get in trouble with the teacher Given Eli’s age and response, which stage of moral development did he demonstrate:
Group of answer choices
Preoperational
Conventional
Preconventional
Postconventional
The stage of moral development Eli demonstrated is Preconventional.
The early stage of moral development can be seen in preconventional morality. Up until about age nine, it persists. Children's decisions at this age are mostly influenced by what adults expect of them and the repercussions of disobeying them.
Morality is externally regulated at the preconventional level. In order to avoid punishment or gain rewards, people abide by the rules that are set forth by authority figures. According to this viewpoint, what is morally correct depends on one's ability to get away with it or what will make them feel good about themselves.
To learn more about preconventional morality, click:
https://brainly.com/question/12670364
#SPJ1
How did earth change about 2.5 billion years ago when many organisms began using photosynthesis to make food
A. The amount of oxygen in the atmosphere increased
B. Mass extinctions occurred
C. The oceans became larger
D. Rainfall increased
Storm radios are designed with backup batteries so that it can be used even in case of a power outage. Which sequence best illustrates the energy conversion during power outage?
During a power outage, storm radios rely on backup batteries to continue operating. This process involves several stages of energy conversion.
Firstly, the energy stored in the backup batteries is converted into electrical energy when the radio is turned on.
The electrical energy is then converted into electromagnetic energy when the radio waves are transmitted from the radio antenna.
When these radio waves reach the receiver, they are converted back into electrical energy, which is then converted into sound energy that can be heard through the speaker.
Throughout this energy conversion process, there is some energy loss due to factors such as resistance in the wiring and inefficiencies in the battery and speaker. However, the backup batteries are designed to provide enough energy to power the radio for a significant period, ensuring that users can stay informed and connected during a power outage.
In summary, the energy conversion sequence during a power outage involves the conversion of stored chemical energy in the battery to electrical energy, then to electromagnetic energy, and finally to sound energy that can be heard through the speaker.
For more such question on energy
https://brainly.com/question/30403434
#SPJ11