Answer:
The correct option is;
The technician should measure the time it takes to start the system using a normal boot and compare that time against the time for the system to perform a clean boot.
Explanation:
Clean boot is the process of starting the Windows operating system where the number of drivers as well as startup programs enabled are minimal in order to ascertain if the cause of a slow system startup is due startup interfering programs or drivers
A clean boot operating system startup and a startup in Safe Mode are similar with the difference being the higher level of control on what to run during start up offered by clean boot to aid troubleshooting startup issues.
List any four routes of transmission of computer virus.
please give me answer
Opening attachments or links from unknown or spoofed emails. note: shown above are two examples of how viruses can often appear as legitimate messages, but are designed to trick the computer user. ...
Downloading software from malicious sites. ...
Online Ads. ...
Social media. ...
Unpatched software.
follow me
The routes of the transmission of computer virus include:
Downloading infected files.Shared devices.Corrupt email attachments.Infected drives.A computer virus refers to a malicious piece of computer code that is designed in order to damage a device or steal data.
The routes of infection for a computer virus include attached files, external storage media, downloading infected files, sharing infected devices, etc.
Read related link on:
https://brainly.com/question/19584310
A virus does not harm the ________ of a computer
Answer:
Hardware part
Explanation:
The hardware part of computer is not harmed by virus.
I hope this will be helpful for you
Answer: Hardware part
Hector is trying to use Windows Defender to run an antivirus scan. Windows Defender refuses to run. When he opens the Action Center, Hector realizes that Windows Defender has been disabled and another antivirus software is running. Hector does not recognize the other antivirus software.
What type attack has infected Hector's computer?
Answer:
Rogue antivirus
Explanation:
A Rogue antivirus is a security software in which it misguides the users to pay for it so that the malware or virus could be removed from the computer but actually this is a malware which is installed in the computer system so that they could able to do fraud with the users
In the given situation, since Hector is trying for run Windows defender but it is disabled and on the other side the other antivirus software that infected the computer
Therefore this situation represents the rogue antivirus
Case-Based Critical Thinking Questions Case 1-2 Ted is asked to create a page containing his family photos for a family reunion website. He has about 20 pictures to post, with a caption that he wants to display before each one. Each picture is a group photo of a particular family. Which tag will Ted need to use to display the pictures
Answer:
Image tag or <img> tag
Explanation:
HTML refers to Hypertext Markup language. In this, we can be designed our documents by applying the font, color, image i.e to presented in the web browser. It is used for creating the webpages
Since in the question, Ted has approx 20 pictures for the post having caption and wants to display the picture so he needs to use the image tag or <img> for displaying the pictures. This tag is used for linking the images for the web pages you have created
_____ should be scanned for viruses
Answer:
Computers/laptops should be scanned for viruses.
Your question has been heard loud and clear.
People's blood , the plasma in the people's blood should be scanned for viruses.
Thank you owo
The best advice for setting a study session is
Answer: A
Explanation:
When an "is a" relationship exists between objects, it means that the specialized object has Group of answer choices Some of the characteristics of the general object, but not all Some of the characteristics of the general class, but not all, plus additional characteristics None of the characteristics of the general object All the characteristics of the general object, plus additional characteristics
Answer:
All the characteristics of the general object, plus additional characteristics
Explanation:
In case when an is a relationship exists between objects. Here is a relationship refers to a relationship in which there is a reference of one class to another class.
So this represent that the specialized object contains all the attributes of a general object along with it it also involved the extra attributes
Hence, the last option is correct
Which of the following is a true statement about milestones?
O A. Meeting milestones contribute to the meeting of a key deliverable.
O B. Milestones are the high level events or actions in a schedule.
O C. Milestones are a helpful but not essential part of a schedule.
O D. Most milestones concern the delivery of a product.
Answer:
B option
Explanation:
my stones are the high level events are actions in a schedule.
Referential integrity states that:______.
A. Something assigned to an attribute when no other value applies (N/A) or when the applicable value is unknown;
B. Values of an attribute must be taken from a pre-defined domain;
C. No primary key attribute (or component of a primary key) can be null;
D. Each foreign key value MUST match a primary key value in another relation or the foreign key value must be null;
Answer:
D. Each foreign key value MUST match a primary key value in another relation or the foreign key value must be null.
Explanation:
In Computer programming, integrity constraints can be defined as a set of standard rules that ensures quality information and database are maintained.
Basically, there are four (4) types of integrity constraints and these are;
1. Key constraints.
2. Domain constraints.
3. Entity integrity constraints.
4. Referential integrity constraints.
Referential integrity states that each foreign key value must match a primary key value in another relation or the foreign key value must be null.
For instance, when a foreign key in Table A points to the primary key of Table B, according to the referential integrity constraints, all the value of the foreign key in Table A must be null or match the primary key in Table B.
Hence, the referential Integrity constraints ensures that the relationship between the data in a table is consistent and valid.
Andy designed a web page for a product-oriented industry using CSS properties. He used several HTML tags to create the web page. He also used tables to ensure that the data is easily managed.
Andy wants the borders to be distinctly visible for each cell in the product details table. Which of the following properties must Andy add to his code to accomplish his goal?
A. border-spacing: length;
B. border-collapse: separate;
C. border-collapse: collapse;
D. border-spacing: initial;
Answer:
CSS documentation
Explanation:
Use this CSS reference to browse an alphabetical index of all the standard CSS properties, pseudo-classes, pseudo-elements, data types, and at-rules. You can also browse a list of all the CSS selectors organized by type and a list of key CSS concepts. Also included is a brief DOM-CSS / CSSOM reference.
Locatiopn: https://devdocs.io/css/
The properties that Andy must add to his code to accomplish his goal is (B), border-collapse: separate.
What is border-collapse?The border-collapse property in CSS determines how the borders of table cells are collapsed. The default value of border-collapse is collapse, which means that the borders of adjacent cells are merged together. To make the borders of the cells in Andy's table distinctly visible, he needs to set the border-collapse property to separate.
The other possible answers are incorrect. The border-spacing property determines the amount of space between the borders of adjacent cells. The border-spacing: initial value sets the border spacing to the default value, which is 0 pixels.
Find out more on CSS properties here: https://brainly.com/question/14918146
#SPJ2
Which of the following statements is false? a. The Java API consists of packages. b. The Java API helps programmers avoid "reinventing the wheel." c. The Java API consists of import declarations. d. None of the above.
Answer:
The answer is "Option c".
Explanation:
In Java programming, the API stands for "application programming interface", which is also known as the lists of all classes in the JDK. It contains all packages, classes, and interfaces, with their techniques, fields. It is a built-in class, which gives the programmer a great deal of usability, and correct choices can be described as follows:
In option a, It is correct because it imports the package to use API. In option b, It allows you to "re-invent the wheel" by developers, that's why it is correct.Brainly won't let me see any answers. I've been trying to check my answers for 45 minutes now. I am unable to see ANY answers at all. Please help. I really need to finish all my work by tonight. *URGENT*
Answer:
I'm having the same problem. I think it has something to do with the Honor Code
Explanation:
What are the types of computers?
Answer:There are 5 types of computers.
Explanation:(1)Super computer: are the fastest and expensive computer.super computer can do trillion calculations in every second.
(2)Mainframe: are similar to the super computers all use raw power focus on few tasks.
(3)Server computer: is a central computer that contain of collection data and program.
(4)Personal computer: is also known as a microcomputer.personal computer is all around can be used as productivity tool.
(5)Work station: are expensive computers and more complex and are intended one user at a time.
Answer:
the four types of computers are;
personal computerMainframe computersuper computersMini computersDr. Garcia is a business professor at a large state college. At the start of each workday, he opens a Web browser on his office computer and accesses the university’s Web site. From there, he logs into his institution’s "MyCollege" portal with his username and password. From the portal he can access his email, Web pages for each of his courses, and confidential information about the students he advises. Most likely, Dr. Garcia is using what kind of network when using the portal?
Answer:
b. Intranet
Explanation:
An intranet refers to the private network that used to sharing the information, for collaboration, connecting the servcies, etc. It can be accessed by only the users who are authorized to use it. Plus, it only used inside the outside organization
So according to the given situation, since Dr Garcia has his credentials that represents the confidential information so it is an intranet netwrok
which is most harmful computer virus define
Answer:
Spyware is the most harmful virus.
It enters into someones computer as a spy and steals the ones personal information, data and other codes.
Explanation:
What process is used to convert numbers between the binary system and the decimal system? (A.)Enter the number in a calculator, divide by 2, and multiply by 10.,(B)Convert each binary number to a letter, then use the letter’s place in the alphabet as the decimal representation ( e.g., A = 1, B = 2),(C.)Add up the digits in the binary number and place the sum behind a decimal point,(D.)Look up the number on a binary-to-decimal conversion table.
Answer:
(D.)Look up the number on a binary-to-decimal conversion table.
Explanation:
Though there are other ways of converting binary-to-decimal but from the given list of options, the best option that describes this conversion is option D.
Analyzing each of the options;
Option A
A binary number can't be converted to decimal by merely dividing it by 2 and multiplying the result by 10;
Take for instance; 11 in binary;
Divide by 2
11/2 = 5.5
Multiply result by 10
5.5 * 10 = 55
This final outcome is incorrect; as 11 in binary = 3 in decimal
Option B
This is also incorrect because as there is no room for alphabets in binary representation of numbers
Option C
This will also give an incorrect result;
Take for instance 11
Add up the digits
1 + 1 = 2
Place a decimal point behind;
This gives 2. or 2.0
This final outcome is incorrect; as 11 in binary = 3 in decimal
Option D
Looking up the number on a conversion table gives the accurate result
There are different types of conversion process. The process used to convert numbers between the binary system and the decimal system is to Look up the number on a binary-to-decimal conversion table.
Binary to decimal conversion is often done to show a number that is listed out in binary number system to its equivalent usually in decimal number system.
For easy conversion, one can Divide the binary number by 2 and write out the remainder. Thereafter you can divide by 2 again and write remainder and this process continue till the last remainder becomes 1 .
After that write all the remainders in the (0 , 1) order. With this, the decimal is converted into binary.
Learn more about binary from
https://brainly.com/question/4467709
Paavo was reviewing a request by an executive for a new subnotebook computer. The executive said that he wanted USB OTG support and asked Paavo’s opinion regarding its security. What would Paavo tell him about USB OTG security
Answer:
Connecting a mobile device as a peripheral to an infected computer could allow malware to be sent to that device.
Explanation:
Since in the question it is mentioned that Paavo reviewed a request by an executive for subnotebook computer i.e new. but he needs to USB OTG support so it is a USB i.e on the go that links the devices from one device to another
Therefore by links the mobile device to the computer i.e infected that allows malware we called virus so that we are able to send it to that device. By this, he wants to tell about the USB OTG security
A user's computer will not boot. A technician notices four indicator lights on the backside of the
computer. Two of the lights are green, and two are amber. Which of the following documentation
should the technician read to determine what the lights are indicating?
A. Network diagram
B. Computer manual
C. Asset management
D. Wiring scheme
Answer:
B.
Explanation:
Computer manual is the user guide that comes along with the computer set to inform the users about the functions, ways to assemble the parts, and so on.
The user manual consists of guide for the users specially for electronic products such as computers, refrigerators; softwares, and so on. These manuals are written by technical writers, programmers, etc.
In the given scenario the technician needs to refer to computer manual to know the meaning of the lights on the backside of the computer.
So, the correct answer is option B.
Which one of these tasks best describes the process of localization?
Answer:
Localization is the process of adapting the project and service at a particular language.
Explanation:
Localization is that adapted to the product and service that need a desired to the popular look and feel.
Localization is to perform that including changing the local culture.
Localization is addition to perform the such details and time zone ,local color, holiday and name translation, money all to be considered.
Localization can sometimes be perform with automatic language translation.
Localization that requirement to the enabling product to be different national product known as globalization.
Computer security is concerned with protecting information, hardware, and software from unauthorized use, as well as preventing or limiting the damage from intrusions, sabotage, and natural disasters.
a) true
b) false
The correct answer is True
Explanation:
Computer security is a branch of security that focuses on the security of computer systems. This includes preventing cyber attacks that could steal the information or damage the software (programming code), as well as, preventing physical attacks or damage, this includes stopping unauthorized personnel from accessing the computers or devices and limiting the damages that might occur in situations such as fires, floods, etc. Additionally, computer security is now an important factor in most companies and organizations as relevant information is saved in computers, also, many functions rely on the use of computer systems.
According to this, the statement about computer security is true because this comprises the protection of hardware, software, and information in cases such as natural disasters, intrusions, etc.
1. Write a try-catch block. In try block, do the following thing: if the balance is less than 100, throw an InsufficientFund exception; else print out the message saying that there are enough money in the account. In catch block, simply print out the message saying that there is not enough money in the account.
2. Write a template function template
T max(T& variable1, T& variable2)
That returns the larger value of variable1 and variable 2.
Assume that class T has overloaded the operator >.
Answer:
(Assuming C++):
#1
try{
if (balance < 100)
{
throw "InsufficientFund";
}
else
{
printf("Sufficient funds in account.\n");
}
}
catch{
printf("Insufficient funds in account.\n");
}
---------------------------------------------------------------------------------------
#2
template <typename T>
T max (T& variable1, T& variable2)
{
return variable1 >= variable2 ? variable1 : variable2;
}
Explanation:
For this, the answer assumes the use of the C++ language since not specified in the problem.
For #1, the use of the try-catch statement is simply to check the value of the funds within an account. The question ask to check if the balance is under 100, to throw an "InsufficientFund" exception to be caught by the catch loop. Otherwise, print there is enough funds. If the exception is caught, the catch loop should simply print insufficient funds to the console. The above code accomplishes each of these things by assuming a variable called "balance" holds the value of the account and has already been declared. Additionally, the code uses the printf function to display the messages to the screen (Assuming stdio.h header has been included).
For #2, a template function called max was created to determine if variable1 or variable 2 had a greater value, and return the greatest variable. The code uses the ternary operator to test the expression greater than or equal to and returns variable1 if greater or equal, otherwise, it returns variable2.
Side note, I haven't coded in C++ in years so some syntax may be wrong, but either way this is the concept of the two questions asked (I think I'm syntactically correct though).
Cheers.
Before Class B network 172.16.0.0 is subnetted by a network engineer, what parts of the structure of the IP addresses in this network already exist, with a specific size? (Choose two answers.)
Answer:
Host and network.
Explanation:
The parts of the structure of the IP addresses in this network already exist, with a specific size, are Host and network.
A user calls the helpdesk and states that they are receiving an IP conflict error on their computer. The user is on a company network that uses DHCP. The technician verifies the PC is using DHCP to obtain TCP/IP settings. Which of the following commands should the helpdesk technician use to resolve this issue? (Select two.)
A. IPCONFIG /REGISTERDNS
B. IPCONFIG /FLUSHDNS
C. IPCONFIG /RELEASE
D. IPCONFIG /RENEW
E. IPCONFIG /ALL
Answer:
a
Explanation:
none
Question 3 of 10
What is one advantage of video tutorials about maintenance and repairs?
O A. Video tutorials help you fix problems by doing the work for you.
O B. Sometimes, seeing a picture of the process is more helpful than
reading about it.
O C. Video tutorials are easier to make than written guides.
O D. Video tutorials cannot do the repair or maintenance for you.
SUBMIT
PREVIOUS
Answer:
B. Sometimes, seeing a picture of the process is more helpful than reading about it.
Explanation:
Video tutorials are a form of communication in which the instructions are given through video instructions. The users drive more information from video tutorials than written or audio. The visual and the auditory aids together helps in creating a better impact on the users. The video tutorial is more user friendly and can easily be controlled by the user. This helps in better understanding and analyzing the information.
Answer: B. Sometimes, seeing a picture of the process is more helpful than reading about it.
Explanation: took the quiz
i know this not school related but my grandmothers RCA RCT6272W23 tablet is saying type password to decrypt storage and i dont know what to do someone please help
Answer:
Type the password
Explanation:
It's probably trying to open some kind of compressed file to access data.
etwork behavior analysis system __________ sensors are typically intended for network perimeter use, so they are deployed in close proximity to the perimeter firewalls, often between the firewall and the Internet border router to limit incoming attacks that could overwhelm the firewall.
Answer:
"Inline" is the correct answer.
Explanation:
Network behavior analysis (NBA) or Analysis of network activity seems to be the technique to observe traffic trends that aren't groups or sets throughout the cable network's everyday traffic. Simplest terms, this is the organization's effort to define network anomalies outside pure congested traffic expect a seamless.So that the above is the correct answer.
CO! Oher...9
pressure
14.
large
The barometric height in a town is 65cmHg. Given that the standard atmospheric pressure
is 76cmHg and density of mercury is 13600kg/m", determine the altitude of the town. (Density of
(3mks)
air is 1.25kg/mº).
Answer:
Altitude of the town(h1) = 1,196.8 m
Explanation:
Given:
Height of barometer(h) = 65 cm Hg = 0.65
Standard atmospheric pressure = 76 cm Hg = 0.76
Density of mercury(Pm) = 13,600 kg/m³
Density of air (Pa) = 1.25 kg/m³
Find:
Altitude of the town(h1)
Computation:
Pressure due column = Δp mercury column
(Pa)(h1) = (Pm)(h)
(1.25)(h1) = (13,600)(0.76-0.65)
(1.25)(h1) = 1,496
Altitude of the town(h1) = 1,196.8 m
What is the role of bpo in growth of Indian economy ?
Answer:
BPO Role in India's Economic Growth
The role played by BPOs in boosting India's economy shows that the IT and ITeS sector have been contributing largely to the economic growth of India. The growth in the contribution of BPOs to Gross Domestic Product has shown a steady rise from 1.2% to 5.4%.
What are the flowchart symbols?
Answer:Flowchart use to represent different types of action and steps in the process.These are known as flowchart symbol.
Explanation:The flowchart symbols are lines and arrows show the step and relations, these are known as flowchart symbol.
Diamond shape: This types of flow chart symbols represent a decision.
Rectangle shape:This types of flow chart symbols represent a process.
Start/End : it represent that start or end point.
Arrows: it represent that representative shapes.
Input/output: it represent that input or output.
The GaVS resource where students can locate information regarding Canvas, student email, registration and O365 is called the: Student Success Site Media Center dashboard Guidance Center
I Inferred you are referring to the Georgia Virtual School resource program.
Answer:
Guidance Center
Explanation:
Interestingly, the Georgia Virtual School (GaVS) enables students access to Virtual education.
Their resource platform allows students to find information regarding Canvas, student email, registration and Office 365 etc by simply going Guidance Center.