The magnitude of the swimmer's velocity relative to the shore is approximately 1.199 knots, and the direction is approximately N86.18⁰W. To find the velocity of the swimmer relative to the shore, we can break down the velocities into their components and then add them up.
Swimmer's velocity: 1 knot on a heading of N30⁰W
Current's velocity: 2 knots towards a bearing of N10⁰E
First, let's convert the velocities from knots to a common unit, such as miles per hour (mph). 1 knot is approximately equal to 1.15078 mph.
Swimmer's velocity:
1 knot = 1.15078 mph
Current's velocity:
2 knots = 2.30156 mph
Swimmer's velocity:
[tex]Velocity_N[/tex] = 1 knot * cos(30⁰) = 1 knot * √(3)/2 ≈ 0.866 knots
[tex]Velocity_W[/tex] = 1 knot * sin(30⁰) = 1 knot * 1/2 ≈ 0.5 knots
Current's velocity:
[tex]Velocity_N[/tex] = 2 knots * sin(10⁰) = 2 knots * 1/6 ≈ 0.333 knots
[tex]Velocity_E[/tex] = 2 knots * cos(10⁰) = 2 knots * √(3)/6 ≈ 0.577 knots
Now, we can add up the north-south and east-west components separately to find the resultant velocity relative to the shore.
Resultant [tex]velocity_N[/tex] = [tex]velocity_N[/tex] (swimmer) + [tex]velocity_N[/tex] (current) ≈ 0.866 knots + 0.333 knots ≈ 1.199 knots
Resultant [tex]velocity_W[/tex] = [tex]velocity_W[/tex] (swimmer) - [tex]Velocity_E[/tex] (current) ≈ 0.5 knots - 0.577 knots ≈ -0.077 knots
Note that the negative value indicates that the resultant velocity is in the opposite direction of the west.
Finally, we can calculate the magnitude and direction of the resultant velocity using the Pythagorean theorem and trigonometry.
Resultant velocity = √(Resultant [tex]velocity_N^2[/tex]+ Resultant [tex]velocity_W^2[/tex])
≈ √((1.199 [tex]knots)^2[/tex]+ (-0.077 [tex]knots)^2[/tex]) ≈ √(1.437601 [tex]knots)^2[/tex] ≈ 1.199 knots
The direction of the resultant velocity relative to the shore can be determined using the arctan function:
Resultant direction = arctan(Resultant [tex]velocity_N[/tex]/ Resultant [tex]velocity_W[/tex])
≈ arctan(1.199 knots / -0.077 knots) ≈ -86.18⁰
Therefore, the magnitude of the swimmer's velocity relative to the shore is approximately 1.199 knots, and the direction is approximately N86.18⁰W.
Learn more about velocity here:
brainly.com/question/18084516
#SPJ11
An RC circuit has an unknown resistance and an initially uncharged capacitor of 666 x 10F When connected to a source potential, it takes the capacitor 27.6 s to become 85.6 % fully charged. What is the resistance of the circuit? Enter a number rounded to the nearest 100 place.
The resistance of the RC circuit is approximately 267 Ω, rounded to the nearest hundredth.
To find the resistance of the RC circuit, we can use the time constant formula for charging a capacitor in an RC circuit:
τ = RC
where τ is the time constant, R is the resistance, and C is the capacitance.
We are given that it takes the capacitor 27.6 s to become 85.6% fully charged. In terms of the time constant, this corresponds to approximately 1 time constant (τ):
t = 1τ
27.6 s = 1τ
Since the capacitor is 85.6% charged, the remaining charge is 14.4%:
Q = 0.144Qmax
Now we can rearrange the time constant formula to solve for the resistance:
R = τ / C
Substituting the given values:
R = 27.6 s / (0.144 × 666 × 10^-6 F)
R = 27.6 s / (0.144 × 666 × 10^-6 F)
R = 27.6 s / (0.144 × 666 × 10^-6 F)
R = 27.6 s / (0.144 × 666 × 10^-6 F)
R = 27.6 s / (0.144 × 666 × 10^-6 F)
R = 27.6 s / (0.144 × 666 × 10^-6 F)
R = 27.6 s / (0.144 × 666 × 10^-6 F)
R = 27.6 s / (0.144 × 666 × 10^-6 F)
R ≈ 267 Ω
To knwo more about RC circuit
https://brainly.com/question/2741777
#SPJ11
A parallel beam of monoenergetic photons emerged from a source when the shielding was removed for a short time. The photon energy hv and the total fluence o of photons are known. (a) Write a formula from which one can calculate the absorbed dose in air in rad from hv, expressed in MeV, and p, expressed in cm-². (b) Write a formula for calculating the exposure in R.
(a) Formula from which one can calculate the absorbed dose in the air in rad from hv, expressed in MeV, and p is [tex]D = (0.877 * o * hv) / p[/tex]. (b) the formula for calculating the exposure in R is [tex]X = (0.87 * o *hv)[/tex].
(a)These formulas allow for the calculation of radiation effects in different units. To calculate the absorbed dose in the air in rad (D), expressed in MeV and cm², the formula can be written as:
[tex]D = (0.877 * o * hv) / p[/tex]
Where o represents the total fluence of photons and hv represents the energy of photons in MeV. p is the area in [tex]cm^2[/tex] over which the radiation is spread.
(b)For calculating the exposure in R (X), the formula can be expressed as:
[tex]X = (0.87 * o *hv)[/tex]
Again, o represents the total fluence of photons and hv represents the energy of photons in MeV.
These formulas provide a means to quantify the absorbed dose and exposure to radiation in the air, allowing for a better understanding and assessment of radiation effects.
learn more about absorbed dose here:
https://brainly.com/question/30512352
#SPJ11
write the missing words in each of the following 1. The value of the electric flux ($) will be maximum when the angle between the uniform electric field (E) and the normal to the surface of the area equal to ..... 2. The formula of the work done (W) is: .......... 3. The relation between the electric field (E) and the electric potential (V) is ..... 4. If d is the distance between the two plates and A is the area of each plate, the capacitance of a parallel plate capacitor is given by 5. The charge (Q) stored in a capacitor can be given by..... 6. The product of the resistance of a conductor (R) and the current passing through it (I) is 7. The unit of the magnetic flux density is..... 8. A region in which many atoms have their magnetic field aligned is called a
The unit of the magnetic flux density is tesla (T), and a region in which many atoms have their magnetic field aligned is called a magnetic domain.Write a final answer:The missing words in each of the following are:1. 90 degrees2. W = F × d × cos(θ)3. E = -dV/dx4. C = εA/d5. Q = CV6. P = VI7. tesla (T)8. magnetic domain
1. The value of the electric flux ($) will be maximum when the angle between the uniform electric field (E) and the normal to the surface of the area is equal to 90 degrees.2. The formula of the work done (W) is: W = F × d × cos(θ), where F is the force, d is the displacement, and θ is the angle between the force and displacement.3. The relation between the electric field (E) and the electric potential (V) is E = -dV/dx, where dx is the distance between the points where the potential is measured.
4. If d is the distance between the two plates and A is the area of each plate, the capacitance of a parallel plate capacitor is given by C = εA/d, where ε is the permittivity of the medium between the plates.5. The charge (Q) stored in a capacitor can be given by Q = CV, where C is the capacitance and V is the potential difference between the plates.
6. The product of the resistance of a conductor (R) and the current passing through it (I) is P = VI, where P is the power dissipated by the conductor.7. The unit of the magnetic flux density is tesla (T).8. A region in which many atoms have their magnetic field aligned is called a magnetic domain.Write a conclusion:In conclusion, the maximum value of electric flux is attained when the uniform electric field (E) and the surface normal of the area are 90 degrees apart.
Additionally, the formula of the work done (W) is W = F × d × cos(θ), and the capacitance of a parallel plate capacitor is given by C = εA/d. The relationship between the electric field (E) and the electric potential (V) is E = -dV/dx, and the charge (Q) stored in a capacitor can be given by Q = CV.
Finally, the unit of the magnetic flux density is tesla (T), and a region in which many atoms have their magnetic field aligned is called a magnetic domain.Write a final answer:The missing words in each of the following are:1. 90 degrees2. W = F × d × cos(θ)3. E = -dV/dx4. C = εA/d5. Q = CV6. P = VI7. tesla (T)8. magnetic domain
Learn more about electric here,
https://brainly.com/question/14306881
#SPJ11
For the following six questions, match the descriptions to the below people (A-J)
A) Eratosthenes B) Aristarchus C) Isaac Newton D) Aristotle E) Ptolemy F) Galileo G) Hipparchus H) Kepler I) Nicolaus Copernicus J) Tycho Brahe
23. Discovered the phases of Venus using a telescope.
24. First to consider ellipses as orbits.
25. Foremost ancient Greek philosopher.
26. Ancient Greek who believed in a sun-centered universe.
27. First to measure the size of the Earth to good accuracy.
28. Developed the first predictive model of the solar system.
The correct match of the descriptions to the below people are 23 - F, 24 - H, 25 - D, 26 - I, 27 - A, 28 - B.
23 - F Galileo: Galileo Galilei is credited with discovering the phases of Venus using a telescope. Through his observations, he observed that Venus went through a series of phases similar to those of the Moon, which supported the heliocentric model of the solar system.
24 - H Kepler: Johannes Kepler was the first to consider ellipses as orbits. He formulated the laws of planetary motion, known as Kepler's laws, which stated that planets move in elliptical paths with the Sun at one of the foci. Kepler's work revolutionized our understanding of celestial mechanics.
25 - D Aristotle: Aristotle, the ancient Greek philosopher, is considered one of the foremost thinkers in history. While his contributions span various fields, including philosophy and natural sciences, his views on astronomy were geocentric. He believed that the Earth was the center of the universe and that celestial bodies moved in perfect circles around it.
26 - I Nicolaus Copernicus: Nicolaus Copernicus was an astronomer who proposed the heliocentric model of the solar system, in which the Sun, rather than the Earth, was at the center. Copernicus's revolutionary idea challenged the prevailing geocentric view and laid the foundation for modern astronomy.
27 - A Eratosthenes: Eratosthenes was an ancient Greek mathematician and astronomer who made significant contributions to geography and astronomy. He is known for his accurate measurement of the Earth's circumference. By measuring the angle of the Sun's rays at two different locations, he estimated the Earth's circumference with remarkable accuracy.
28 - B Aristarchus: Aristarchus of Samos is credited with developing the first predictive model of the solar system. He proposed a heliocentric model centuries before Copernicus, suggesting that the Sun was at the center of the universe, with the Earth and other planets orbiting it. Aristarchus's model was a significant departure from the prevalent geocentric view of the time.
To know more about people here
https://brainly.com/question/1581614
#SPJ4
A different person uses +2.3 diopter contact lenses to read a book that they hold 28 cm from their eyes. (i) Is this person nearsighted or farsighted? JUSTIFY YOUR ANSWER. NO CREDIT WILL BE GIVEN WITHOUT JUSTIFICATION. (ii) Where is this person's near point, in cm? (iii) As this person ages, they eventually must hold the book 38 cm from their eyes in order to see clearly with the same +2.3 diopter lenses. What power lenses do they need in order to hold book back at the original 28 cm distance?
i) The person is using +2.3 diopter contact lenses. Since the person requires positive diopter lenses to read the book, it indicates that they are farsighted.
ii) The person's near point is approximately 43.48 cm.
iii) The person would need approximately +0.0263 diopter lenses to hold the book at the original 28 cm distance.
(i) To determine if the person is nearsighted or farsighted, we need to consider the sign convention for diopters. Positive diopter values indicate that the person is farsighted, while negative diopter values indicate that the person is nearsighted.
Justification: Farsighted individuals have difficulty focusing on nearby objects and require converging lenses (positive diopter lenses) to bring the light rays to a focus on the retina.
(ii) The near point refers to the closest distance at which a person can focus on an object clearly without any optical aid. It is determined by the maximum amount of accommodation of the eye.
Since the person is farsighted and using +2.3 diopter lenses to read the book at a distance of 28 cm, we can use the formula for calculating the near point:
Near point = 100 cm / (diopter value in positive form)
Near point = 100 cm / (2.3 D)
Near point ≈ 43.48 cm
(iii) If the person ages and needs to hold the book 38 cm from their eyes to see clearly with the same +2.3 diopter lenses, we can calculate the power of lenses they would need to hold the book at the original 28 cm distance.
Using the lens formula:
1/f = 1/di + 1/do
Where f is the focal length of the lens, di is the distance of the image (38 cm), and do is the distance of the object (28 cm).
Solving for f, we get:
1/f = 1/38 cm + 1/28 cm
1/f ≈ 0.0263 cm^(-1)
f ≈ 38.06 cm
The power of the lenses required to hold the book at the original 28 cm distance can be calculated as:
Power = 1/f
Power ≈ 1/38.06 D
Power ≈ 0.0263 D
To know more about focal length
https://brainly.com/question/31755962
#SPJ11
Find a sinusoidal equation for a 40Kw/m wave energy in the sea.
To find the sinusoidal equation for a 40kW/m wave energy in the sea, we need to use the formula; y = A sin (ωt + Φ)where; A is the amplitude of the wave,ω is the angular frequency of the wave,t is time, andΦ is the phase angle.
The given value is 40kW/m wave energy in the sea. This represents the amplitude (A) of the wave. Therefore, A = 40.We also know that the period of the wave, T = 150m since it takes 150m for the wave to complete one cycle.To find the angular frequency (ω) of the wave, we use the formula;ω = 2π/T= 2π/150 = π/75Therefore, ω = π/75Putting these values in the formula;y = 40 sin (π/75 t + Φ)Where Φ is the phase angle, which is not given in the question.
Learn more on phase here:
brainly.in/question/37994359
#SPJ11
A 34.0 μF capacitor is connected to a 60.0 resistor and a generator whose RMS output is 30.3 V at 59.0 Hz. Calculate the RMS current in the circuit. 78.02A Submit Answer Incorrect. Tries 1/12 Previous Tries Calculate the RMS voltage across the resistor. Submit Answer Tries 0/12 Calculate the RMS voltage across the capacitor. Submit Answer Tries 0/12 Calculate the phase angle for the circuit.
The RMS current in the circuit is 0.499 A. The RMS voltage across the resistor is 18.6 V. The RMS voltage across the capacitor is 21.6 V. The phase angle for the circuit is 37.5 degrees.
To calculate the RMS current in the circuit, we can use Ohm's Law, which states that the RMS current (I) is equal to the RMS voltage (V) divided by the resistance (R). In this case, the RMS voltage is 30.3 V and the resistance is 60.0 Ω. Therefore, the RMS current is I = V/R = 30.3/60.0 = 0.499 A.
To calculate the RMS voltage across the resistor, we can use the formula V_R = I_RMS * R, where I_RMS is the RMS current and R is the resistance. In this case, the RMS current is 0.499 A and the resistance is 60.0 Ω. Therefore, the RMS voltage across the resistor is V_R = 0.499 * 60.0 = 18.6 V.
To calculate the RMS voltage across the capacitor, we can use the formula V_C = I_C * X_C, where I_C is the RMS current and X_C is the reactance of the capacitor. The reactance of the capacitor can be calculated as X_C = 1/(2πfC), where f is the frequency and C is the capacitance. In this case, the frequency is 59.0 Hz and the capacitance is 34.0 μF (which can be converted to 34.0 * 10^-6 F). Therefore, X_C = 1/(2π59.0(34.0*10^-6)) ≈ 81.9 Ω. Substituting the values, we get V_C = 0.499 * 81.9 ≈ 21.6 V.
The phase angle for the circuit can be calculated using the tangent of the angle, which is equal to the reactance of the capacitor divided by the resistance. Therefore, the phase angle θ = arctan(X_C/R) = arctan(81.9/60.0) ≈ 37.5 degrees.
Learn more about capacitor here:
https://brainly.com/question/31627158
#SPJ11
How much energy must be removed from the system to turn liquid copper of mass 1.5 kg at 1083 degrees celsius to solid copper at 1000 degrees celsius? Watch Another a) −278×10 ∧
3 J b) −2.49×10 ∧
5 J c) 2.25×10 ∧
3 J d) −3.67×10 ∧
4 J e) 9.45×10 ∧
4 J A concrete brick wall has a thickness of 6 cm, a height of 3 m, and a width of 6 m. The rate at which energy is transferred outside through the wall is 160 W. If the temperature inside is 22 degrees C. What is the temperature outside? a) 5.67 degrees C b) 15.2 degrees C c) −19.8 degrees C d) 23.8 degrees C e) 21.4 degrees C
To turn liquid copper of mass 1.5 kg at 1083 degrees Celsius to solid copper at 1000 degrees Celsius, approximately -2.49×10^5 J of energy must be removed from the system. For the concrete brick wall, the temperature outside is approximately 5.67 degrees Celsius.
When a substance undergoes a phase change, energy needs to be removed or added to the system to facilitate the transition. In the case of turning liquid copper to solid copper, we need to calculate the energy that must be removed. The amount of energy can be calculated using the equation:
Q = mcΔT,
where Q represents the energy, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature. Since copper has a specific heat capacity of approximately 390 J/kg·°C, we can calculate the energy required as follows:
Q = (1.5 kg) × 390 J/kg·°C × (1083 °C - 1000 °C) = -2.49×10^5 J.
Hence, approximately -2.49×10^5 J of energy must be removed from the system to turn liquid copper at 1083 degrees Celsius to solid copper at 1000 degrees Celsius.
For the concrete brick wall, the rate of energy transfer through the wall is given as 160 W. We can use the formula:
P = kA(ΔT/Δx),
where P is the power, k is the thermal conductivity of the material, A is the area, ΔT is the temperature difference, and Δx is the thickness. Rearranging the equation, we have:
ΔT = (PΔx)/(kA).
Plugging in the values, where the thickness (Δx) is 6 cm (or 0.06 m), the height (A) is 3 m × 6 m = 18 m², the power (P) is 160 W, and the thermal conductivity of concrete is approximately 1.7 W/(m·°C), we can calculate the temperature difference:
ΔT = (160 W × 0.06 m)/(1.7 W/(m·°C) × 18 m²) ≈ 5.67 °C.
Therefore, the temperature outside is approximately 5.67 degrees Celsius.
Learn more about energy transfer here:
https://brainly.com/question/13087586
#SPJ11
Telescope Magnification: What is the magnification of a 1200mm focal length, 8" diameter reflecting telescope using a 26mm eyepiece? 2.14x 46x 5,280x 6x 154x
The magnification of a 1200mm focal length, 8" diameter reflecting telescope using a 26mm eyepiece is 46x.
The magnification of a telescope is determined by dividing the focal length of the telescope by the focal length of the eyepiece. In this case, the telescope has a focal length of 1200mm, and the eyepiece has a focal length of 26mm.
By dividing 1200mm by 26mm, we get a magnification of approximately 46x.Magnification is an important factor in telescopes as it determines how much larger an object appears compared to the eye.
A higher magnification allows for closer views of distant objects, but it also decreases the field of view and may result in a dimmer image. In this case, a magnification of 46x means that the telescope will make objects appear 46 times larger than they would with the eye.
This can be useful for observing celestial objects in greater detail, such as the Moon or planets. However, it's worth noting that magnification alone does not determine the quality of the image.
Other factors like the quality of the telescope's optics, atmospheric conditions, and the observer's own eyesight can also impact the overall viewing experience.
Learn more about focal length here ;
https://brainly.com/question/31755962
#SPJ11
A worker drags a crate across a factory floor by pulling on a rope tied to the crate. The worker exerts a force of 450 N on the rope, which is inclined at 38 ∘
to the horizontal, and the floor exerts a horizontal force of 125 N that opposes the motion. Calculate the acceleration of the crate if its mass is 310 kg.
The acceleration of the crate is approximately [tex]2.13 m/s^2[/tex] is calculated by considering the forces acting on it. The worker exerts a force of 450 N on the rope, inclined at 38 degrees to the horizontal, while the floor exerts a horizontal force of 125 N opposing the motion.
To calculate the crate's acceleration, we need to consider the net force acting on it. The net force is the vector sum of the forces acting on the crate. In this case, the force exerted by the worker is directed at an angle of 38 degrees to the horizontal, while the opposing force by the floor is purely horizontal.
We can break down the force exerted by the worker into its horizontal and vertical components. The vertical component does not contribute to the crate's acceleration since it is perpendicular to the motion. The horizontal component of the worker's force is given by[tex]F_h = F * cos(\theta)[/tex], where F is the magnitude of the force (450 N) and θ is the angle (38 degrees).
The net force acting on the crate can be calculated as the difference between the horizontal force exerted by the worker and the opposing force by the floor. Therefore, the net force is [tex]F_{net} = F_h - F_{floor} = F * cos(\theta) - F_{floor}[/tex]r.
Using Newton's second law, [tex]F_{net} = m * a[/tex], where m is the mass of the crate (310 kg) and a is its acceleration, we can solve for the acceleration:
[tex]F * cos(\theta) - F_{floor} = m * a[/tex]
Substituting the given values:
450 N * cos(38 degrees) - 125 N = 310 kg * a
Simplifying and solving for a:
[tex]a = (450 N * cos(38 degrees) - 125 N) / 310 kg =2.13 m/s^2[/tex]
Therefore, the acceleration of the crate is approximately [tex]2.13 m/s^2[/tex].
Learn more about acceleration here:
https://brainly.com/question/2303856
#SPJ11
The meridional flux of heat is 10 K m/s. The effective diffusivity is 5 m2/s. What is the magnitude of the temperature gradient in K/m?
The meridional flux of heat is 10 K m/s. The effective diffusivity is 5 m2/s. The magnitude of the temperature gradient is 2 K/m.
To find the magnitude of the temperature gradient in K/m, we can use Fourier's law of heat conduction. This law states that the heat flux is proportional to the temperature gradient. Let's go through the calculations step by step.
Given:
Meridional flux of heat (q) = 10 K m/s
Effective diffusivity (k) = 5 m²/s
According to Fourier's law of heat conduction:
q = -k (ΔT/Δx)
We want to find the magnitude of the temperature gradient (ΔT/Δx). Rearranging the equation, we have:
ΔT/Δx = -q/k
Substituting the given values:
ΔT/Δx = -10/5
ΔT/Δx = -2
Since we are interested in the magnitude of the temperature gradient, we take the absolute value:
|ΔT/Δx| = |-2|
|ΔT/Δx| = 2
Learn more about temperature
https://brainly.com/question/7510619
#SPJ11
A long straight wire carries a current of 5 A. What is the magnetic field a distance 5 mm from the wire? 1. 2.0 x 10-7 T B) 2.0 × 10-¹ T C) 6.3 x 10-¹ T D) 6.3 x 10-7 T
The magnetic field generated by a long straight wire carrying a current of 5 A at a distance of 5 mm from the wire is [tex]2.0 * 10^-^7[/tex] T.
According to Ampere's law, the magnetic field around a long straight wire is inversely proportional to the distance from the wire. The formula to calculate the magnetic field produced by a current-carrying wire is given by
[tex]B = (\mu_0 * I) / (2\pi * r)[/tex]
where B is the magnetic field, μ₀ is the permeability of free space[tex](4\pi * 10^-^7 T.m/A)[/tex], I is current, and r is the distance from the wire.
Plugging in the values,
[tex]B = (4\pi * 10^-^7 T.m/A * 5 A) / (2\pi * 0.005 m),[/tex]
which simplifies to:
[tex]B = 2.0 * 10^-^7 T[/tex].
Therefore, the magnetic field at a distance of 5 mm from the wire is [tex]2.0 * 10^-^7 T[/tex].
Learn more about magnetic fields here:
https://brainly.com/question/19542022
#SPJ11
A beam of light strikes the surface of glass (n = 1.46) at an angle of 70⁰ with respect to the normal. Find the angle of refraction inside the glass. Take the index of refraction of air n1 = 1.
n1sinθ1 = n2sinθ2, sinθ2 = (n1/n2)sinθ1sinθ2 = (1/1.46)sin70°sinθ2 = 0.643θ2 = sin⁻¹ (0.643)θ2 = 40.9°Therefore, the angle of refraction inside the glass is 40.9°. Hence, the correct option is (B).
According to Snell's Law, n1sinθ1 = n2sinθ2where n1 is the index of refraction of the first medium, θ1 is the angle of incidence, n2 is the index of refraction of the second medium, and θ2 is the angle of refraction.We know that:Angle of incidence, θ1 = 70°Index of refraction of air, n1 = 1Index of refraction of glass, n2 = 1.46Angle of refraction inside the glass, θ2 = ?Therefore,n1sinθ1 = n2sinθ2, sinθ2 = (n1/n2)sinθ1sinθ2 = (1/1.46)sin70°sinθ2 = 0.643θ2 = sin⁻¹ (0.643)θ2 = 40.9°Therefore, the angle of refraction inside the glass is 40.9°. Hence, the correct option is (B).
Learn more about Angle here,
https://brainly.com/question/1309590
#SPJ11
In one measurement of the body's bioelectric impedance, values of Z=5.59×10 2
∘ and ϕ=−7.98 ∘
are obtained for the total impedance and the phase angle, respectively. These values assume that the body's resistance R is in series with its capacitance C and that there is no inductance L. Determine the body's (a) resistance and (b) capacitive reactance. (a) Number Units" (b) Number Units
(a) Resistance (R) = 553.372 Ω.
(b) Capacitive reactance (Xc) = 77.118 Ω.
In one measurement of the body's bioelectric impedance, values of Z = 5.59×10^2° and ϕ = −7.98° are obtained for the total impedance and the phase angle, respectively.
These values assume that the body's resistance R is in series with its capacitance C and that there is no inductance L.
Determine the body's (a) resistance and (b) capacitive reactance. (a)Number = 460.49 Units = Ω
(b)Number = 395.26 Units = Ω
In this problem, we are given the total impedance (Z) and the phase angle (ϕ) of a body in terms of resistance (R) and capacitive reactance (Xc) as follows,
Z = √(R² + Xc²) .....(1)
ϕ = tan⁻¹(-Xc/R) ......(2)
Now, we need to calculate the resistance (R) and capacitive reactance (Xc) of the body using the given values of Z and ϕ.In the given problem, we have the following values:
Z = 5.59×10^2° = 559 ωϕ = −7.98°
Now, using the equation (1), we have = √(R² + Xc²)
Substituting the given value of Z in the above equation, we have559 = √(R² + Xc²)
Squaring both sides, we have 559² = R² + Xc²R² + Xc² = 312,481 .....(3)
Now, using the equation (2), we have
ϕ = tan⁻¹(-Xc/R)
Substituting the given values of ϕ and R in the above equation, we have-7.98° = tan⁻¹(-Xc/R)
tan(-7.98°) = -Xc/R
-0.139 = -Xc/R
Xc = 0.139R .....(4)
Substituting the value of Xc from equation (4) into equation (3), we get
R² + (0.139R)² = 312,481
R² + 0.0193
R² = 312,4811.0193
R² = 312,481R² = 306,125.2R = √306,125.2
R = 553.372 Ω
Therefore, the body's resistance (R) is 553.372 Ω.
Substituting this value of R in equation (4), we get
Xc = 0.139 × 553.372Xc = 77.118 Ω
Therefore, the body's capacitive reactance (Xc) is 77.118 Ω.
The answers are:(a) Resistance (R) = 553.372 Ω.(b) Capacitive reactance (Xc) = 77.118 Ω.
To learn about resistance here:
https://brainly.com/question/30901006
#SPJ11
At the second minimum adjacent to the central maximum of a single-slit diffraction pattern the Huygens wavelet from the top of the slit is 180 ∘
out of phase with the wavelet from: the midpoint of the slit the bottom of the slit None of these choices. a point one-fourth of the slit width from the top a point one-fourth of the slit width from the bottom of the slit
At the second minimum adjacent to the central maximum of a single-slit diffraction pattern, the Huygens wavelet from the top of the slit is 180° out of phase with the wavelet from the midpoint of the slit.
In a single-slit diffraction pattern, when light passes through a narrow slit, it spreads out and creates a pattern of bright and dark regions on a screen. The central maximum is the brightest spot in the pattern, while adjacent to it are dark regions called minima. The Huygens wavelet principle explains how each point on the slit acts as a source of secondary wavelets that interfere with each other to form the overall pattern.
At the second minimum adjacent to the central maximum, the wavelet from the top of the slit and the wavelet from the midpoint of the slit are out of phase by 180 degrees. This means that the crest of one wavelet aligns with the trough of the other, resulting in destructive interference and a dark region. The wavelet from the bottom of the slit and the wavelet from a point one-fourth of the slit width from the top or bottom are not specifically mentioned in the question, so their phase relationship cannot be determined.
To learn more about single-slit diffraction pattern here:
https://brainly.com/question/32079937
#SPJ11
Calculate the magnetic field that produces a magnetic force of 1.8mN east on a 85 cm wire carrying a conventional current of 3.0 A directed south
The magnetic field that produces a magnetic force of 1.8 mN east on the 85 cm wire carrying a current of 3.0 A directed south is approximately 0.706 T.
To calculate the magnetic field that produces a magnetic force on a current-carrying wire, we can use the formula:
Force = Magnetic field (B) × Current (I) × Length (L) × sin(θ)
where θ is the angle between the direction of the magnetic field and the current.
In this case, we are given the force (1.8 mN), the current (3.0 A), and the length of the wire (85 cm = 0.85 m). We also know that the force is directed east and the current is directed south, so the angle between the magnetic field and the current is 90 degrees.
Rearranging the formula, we can solve for the magnetic field:
Magnetic field (B) = Force / (Current × Length × sin(θ))
Plugging in the values:
B = (1.8 mN) / (3.0 A × 0.85 m × sin(90°))
The sine of 90 degrees is 1, so we have:
B = (1.8 × 10^-3 N) / (3.0 A × 0.85 m × 1)
B = 0.706 T
Therefore, the magnetic field that produces a magnetic force of 1.8 mN east on the 85 cm wire carrying a current of 3.0 A directed south is approximately 0.706 T.
Learn more about magnetic force
https://brainly.com/question/24153147
#SPJ11
An aircraft has a cruising speed of 100 m/s. On this particular day, a wind is blowing from the west at 75.0 m/s. If the plane were to fly due north, what would be the velocity relative to the ground? An aircraft has a cruising speed of 100 m/s. On this particular day, a wind is blowing from the west at 75.0 m/s. If the pllot wishes to have a resultant direction of due north, in what direction should the plane be pointed? What will be the plane's displacement in 1.25 h ?
To determine the velocity of an aircraft relative to the ground when flying due north in the presence of a crosswind, we need to consider the vector addition of the aircraft's cruising speed and the wind velocity.
The resultant velocity will have both magnitude and direction. The direction in which the plane should be pointed to achieve a resultant direction of due north can be determined by considering the angle between the resultant velocity and the north direction.
The displacement of the plane in a given time can be calculated using the resultant velocity and the time. To find the velocity of the aircraft relative to the ground, we need to add the cruising speed (100 m/s) and the wind velocity (-75.0 m/s) as vectors. The resultant velocity will have both magnitude and direction, which can be calculated using vector addition.
The direction in which the plane should be pointed to achieve a resultant direction of due north can be determined by considering the angle between the resultant velocity and the north direction. This angle can be found using trigonometry.
To calculate the plane's displacement in 1.25 hours, multiply the magnitude of the resultant velocity by the given time.
Learn more about vector addition here:
https://brainly.com/question/23867486
#SPJ11
Determine the location and type of image formed by a 4 cm tall object that is located 0.18 m in front of a concave mirror of radius 0.4 m 18.0 cm behind in the mirror, virtual and 2.25x bigger. 180 cm behind in the mirror, virtual and 10.0x bigger. 20.0 cm in front of the mirror, real and 10.0x bigger. 10 cm behind the mirror, virtual and 10.0x bigger.
A concave mirror is also known as a converging mirror since it has the ability to converge parallel light rays that strike it.
The location and type of image formed by a 4 cm tall object that is located 0.18 m in front of a concave mirror of radius 0.4 m are calculated below:The object distance is given by u = -18 cm, and the radius of curvature of the mirror is given by R = -40 cm (since the mirror is concave).The magnification produced by the mirror is given by the formula M = -v/u where M is the magnification, v is the image distance, and u is the object distance.The position of the image is determined using the mirror formula which is 1/f = 1/v + 1/u where f is the focal length of the mirror.
The focal length is determined using f = R/2. The magnification M is given by M = -v/u. We know that the object height h = 4 cm. Using these formulas and given values, we obtain the following results:
1. 18.0 cm behind the mirror, virtual and 2.25x bigger.
2. 180 cm behind the mirror, virtual and 10.0x bigger.
3. 20.0 cm in front of the mirror, real and 10.0x bigger.
4. 10 cm behind the mirror, virtual and 10.0x bigger.The image is virtual, upright, and larger than the object in all the cases except for case 3. The image is also behind the mirror in all the cases except for case 3.
Learn more about Magnification here,
https://brainly.com/question/29306986
#SPJ11
A pulley, with a rotational inertia of 2.4 x 10⁻² kg.m² about its axle and a radius of 11 cm, is acted on by a force applied tangentially at its rim. The force magnitude varies in time as F = 0.60t+ 0.30t², with F in newtons and t in seconds. The pulley is initially at rest. At t = 4.9 s what are (a) its angular acceleration and (b) its angular speed?
Answer: The angular acceleration of the pulley is 10.201 rad/s²
The angular speed of the pulley is 49.98 rad/s.
(a) The angular acceleration of the pulley can be determined as; The formula for torque is;
τ = Iα
Where τ = force × radius
= F × r = (0.60t + 0.30t²) × 0.11
= 0.066t + 0.033t².
Substitute the given values of I and τ in the above expression,
2.4 × 10⁻² × α
= 0.066t + 0.033t²α
= (0.066t + 0.033t²)/2.4 × 10⁻²α
= (0.066 × 4.9 + 0.033 × (4.9)²)/(2.4 × 10⁻²)α
= 10.201 rad/s².
Therefore, the angular acceleration of the pulley is 10.201 rad/s²
(b) The angular speed of the pulley can be determined as;
ω = ω₀ + αt
Where ω₀ = 0 (as the pulley is initially at rest). Substitute the given values in the above expression,
ω = αt
ω = 10.201 × 4.9
ω = 49.98 rad/s.
Therefore, the angular speed of the pulley is 49.98 rad/s.
Learn more about angular speed : https://brainly.com/question/6860269
#SPJ11
A neutron (mass = 1.0088u) decays into a proton (mass = 1.0072u) and electron (mass = 0.00055u) and some more particles. How much energy will be contained in all the particles produced. 1u = 931.5 MeV/c².
The total energy contained in all the particles produced is 2.225 MeV.
The mass defect (Δm) of the neutron is equal to the sum of the mass of the proton and electron minus the mass of the neutron:
Δm = (1.0072 + 0.00055) u - 1.0088 u= 0.00095 u
Now, the energy released (E) is obtained by using the formula:
E = Δm × c²= 0.00095 u × (931.5 MeV/c²/u) × c²= 0.885925 MeV
To find the total energy contained in all the particles produced, add the rest mass energies of the proton and electron to the energy released:
E_total = E + (m_proton × c²) + (m_electron × c²)
= 0.885925 MeV + (1.0072 u × 931.5 MeV/c²/u) + (0.00055 u × 931.5 MeV/c²/u)
= 2.225 MeV
Therefore, the total energy contained in all the particles produced is 2.225 MeV.
Learn more about proton: https://brainly.com/question/1481324
#SPJ11
In cases of Refraction, when the refracted beam approaches the Normal when passing the medium, it is due to:
A) the refractive index is lower because the material is less dense
B) The wavelength changes but the frequency remains constant.
C) The refractive index increases because it is denser.
D) The medium where light refracts absorbs energy.
Correct option is C. When the refracted beam approaches the Normal when passing through a medium, it is due to the increased refractive index of the denser material.
Refraction is the bending of light as it passes from one medium to another with a different refractive index. The refractive index is a measure of how much a medium can bend light. When a beam of light travels from a less dense medium to a denser medium, such as from air to water or from air to glass, the beam of light bends towards the normal (an imaginary line perpendicular to the surface of the medium).
The change in direction of the light beam occurs because the speed of light is different in different materials. The refractive index is defined as the ratio of the speed of light in a vacuum to the speed of light in the medium. When light enters a denser medium, such as water or glass, its speed decreases, resulting in a higher refractive index for the medium. As a result, the beam of light bends towards the normal.
Therefore, the correct answer is C) The refractive index increases because it is denser.
Learn more about refractive index here:
https://brainly.com/question/30761100
#SPJ11
Asteroids X, Y, and Z have equal mass of 5.0 kg each. They orbit around a planet with M=5.20E+24 kg. The orbits are in the plane of the paper and are drawn to scale.
Asteroids X, Y, and Z have equal mass of 5.0 kg each. They orbit around a planet with M=5.20E+24 kg. Therefore, the periods of asteroid X, Y, and Z are 8262.51 s, 10448.75 s, and 12425.02 s, respectively.
The formula for the period of orbit is given by;
T = 2π × √[a³/G(M₁+M₂)]
where T is the period of the orbit, a is the semi-major axis, G is the universal gravitational constant, M₁ is the mass of the planet and M₂ is the mass of the asteroid
Let's calculate the distance between the planet and the asteroids: According to the provided diagram, the distance between the asteroid X and the planet is 6 cm, which is equal to 6.00 × 10⁻² m
Similarly, the distance between the asteroid Y and the planet is 9 cm, which is equal to 9.00 × 10⁻² m
The distance between the asteroid Z and the planet is 12 cm, which is equal to 12.00 × 10⁻² m
Now, let's calculate the period of each asteroid X, Y, and Z.
Asteroid X:T = 2π × √[a³/G(M₁+M₂)] = 2π × √[[(6.00 × 10⁻²)² × (5.20 × 10²⁴)]/(6.67 × 10⁻¹¹ × (5.0 + 5.20 × 10²⁴))] = 8262.51 s
Asteroid Y:T = 2π × √[a³/G(M₁+M₂)] = 2π × √[[(9.00 × 10⁻²)² × (5.20 × 10²⁴)]/(6.67 × 10⁻¹¹ × (5.0 + 5.20 × 10²⁴))] = 10448.75 s
Asteroid Z:T = 2π × √[a³/G(M₁+M₂)] = 2π × √[[(12.00 × 10⁻²)² × (5.20 × 10²⁴)]/(6.67 × 10⁻¹¹ × (5.0 + 5.20 × 10²⁴))] = 12425.02 s
Therefore, the periods of asteroid X, Y, and Z are 8262.51 s, 10448.75 s, and 12425.02 s, respectively.
Learn more about universal gravitational constant here:
https://brainly.com/question/17438332
#SPJ11
A train decelerates uniformly at a rate of 2 m/s2 and comes to a stop in 10 seconds. Find the initial velocity of the train.
The initial velocity of the train is 20m/s when the train decelerates uniformly at a rate of 2m/s2. It means that initially, at time = 0 seconds, the train was moving with a velocity of 20m/s.
We know that,
v = u +at
where, v = final velocity
u = initial velocity
a = acceleration
t = time taken
In this case, as the train is decelerating we will use a negative sign with acceleration.
Substituting the values we get,
v = u + (-2)(10)
v will be equal to zero, as the train comes to a stop.
0 = u - 20
u = 20 m/s
Hence, the initial velocity of the train is 20m/s when the train decelerates uniformly at a rate of 2m/s2 and comes to a stop in 10 seconds.
To learn more about deceleration:
https://brainly.com/question/18417367
A block is released from rest at a vertical height H above the base of a frictionless ramp. After sliding off the ramp, the block encounters a rough, horizontal surface and comes to a stop after moving a distance 2H. What is the coefficient of kinetic friction between the block and the horizontal surface?
The coefficient of kinetic friction between the block and the vertical face is H/ 2H or1/2.
In the given question, a block is released from rest at a perpendicular height H above the base of a amicable ramp. After sliding off the ramp, the block encounters a rough, vertical face and comes to a stop after moving a distance 2H. We need to find the measure of kinetic disunion between the block and the vertical face. Let's denote the coefficient of kinetic friction by' µ'. The distance moved by the block is 2H. The final haste of the block is 0 m/ s as the block comes to a stop. Now, we know that the work done by friction is equal to the kinetic energy lost by the block. W = change in KE.
This implies the following relation
Frictional force x Distance moved by the block = (1/2) m( vf ²- vi ²)
We can calculate the original haste of the block when it slides off the ramp using the conservation of energy.
Total energy at the top = Implicit energy at the top mgh = (1/2) mv ² v = sqrt( 2gh) So, original haste, vi = sqrt( 2gh)
The final haste of the block, vf = 0 m/ s
The distance moved by the block, d = 2H
From the below relation, we can write µmgd = (1/2) m( vf ²- vi ²) µgd = (1/2) v ² µgd = (1/2)( sqrt( 2gh)) ² µgd = gh µ = h/ d = H/ 2H = 1/2
The coefficient of kinetic friction between the block and the vertical face is H/ 2H or1/2.
Learn more about kinetic friction https://brainly.com/question/14111192
#SPJ11
Calculate the Magnitude of the Electric Force (in Newtons) between a 4x10-6 C and a 6 x10-6 C charges separated by 3 cm.
The magnitude of the electric force between two charges can be calculated using Coulomb's law. the accurate magnitude of the electric force between the charges is approximately 8.97 x 10^7 Newtons.
Coulomb's law states that the magnitude of the electric force between two charges is directly proportional to the product of the magnitudes of the charges and inversely proportional to the square of the distance between them.
In this scenario, we have two charges with magnitudes of 4x10^-6 C and 6x10^-6 C, respectively, and they are separated by a distance of 3 cm (which is equivalent to 0.03 m).
Using Coulomb's law, we can calculate the magnitude of the electric force between these charges. The formula is given by F = k * (|q1| * |q2|) / r^2, where F represents the electric force, k is the electrostatic constant (approximately equal to 9x10^9 N m^2/C^2), |q1| and |q2| are the magnitudes of the charges, and r is the distance between the charges.
Plugging these values into the formula: F = (9 x 10^9 N m^2/C^2) * ((4 x 10^-6 C) * (6 x 10^-6 C)) / (0.03 m)^2
Calculating the expression: F = (9 x 10^9 N m^2/C^2) * (24 x 10^-12 C^2) / (0.0009 m^2)
= (9 x 10^9 N m^2/C^2) * 2.67 x 10^-5 C^2 / 0.0009 m^2
= (9 x 10^9 N m^2/C^2) * 2.967 x 10^-2 N
Calculating the final result: F ≈ 8.97 x 10^7 N
Learn more about magnitude here:
https://brainly.com/question/28173919
#SPJ11
A spherical liquid drop of radius R has a capacitance of C = 4me,R. If two such drops combine to form a single larger drop, what is its capacitance? A. 2 C B. 2 C C. 2¹3 C D. 2¹3 €
The answer is B. 2 C. The capacitance of the combined drop is twice the capacitance of each individual drop. When two identical spherical drops combine to form a larger drop, the resulting capacitance can be calculated using the concept of parallel plate capacitors.
The capacitance of a parallel plate capacitor is given by the formula:
C = ε₀ * (A / d),
where C is the capacitance, ε₀ is the permittivity of free space, A is the area of the plates, and d is the separation distance between the plates.
In this case, the spherical drops can be approximated as parallel plates, and when they combine, the resulting larger drop will have a larger area but the same separation distance.
Let's assume the radius of each individual drop is R and the radius of the combined drop is R'.
The capacitance of each individual drop is given as C = 4πε₀R.
When the drops combine, the resulting drop will have a larger radius R'. The area of the combined drop will be the sum of the areas of the individual drops, which is given by:
A' = 2 * (πR²) = 2πR².
Since the separation distance remains the same, the capacitance of the combined drop can be calculated as:
C' = ε₀ * (A' / d) = ε₀ * (2πR² / d).
Comparing this with the capacitance of each individual drop (C = 4πε₀R), we can see that the capacitance of the combined drop is:
C' / C = (2πR² / d) / (4πR) = (πR / 2d).
Therefore, the capacitance of the combined drop is given by:
C' = (πR / 2d) * C.
Substituting the given capacitance C = 4me,R, we get:
C' = (πR / 2d) * 4me,R.
Simplifying this expression, we find that the capacitance of the combined drop is:
C' = 2me,R.
Therefore, the answer is B. 2 C. The capacitance of the combined drop is twice the capacitance of each individual drop.
To know more about The capacitance
brainly.com/question/31871398
#SPJ11
Suppose the annual-average net top-of-atmosphere radiation equatorward of 45 degrees latitude is +6 PW. What is the net top-of-atmosphere radiation poleward of 45 degrees, to the neasrest PW? don't forget the signt
The value of net top-of-atmosphere radiation poleward of 45 degrees latitude cannot be determined due to the lack of information regarding the outgoing longwave radiation in that region.
The given problem involves finding the net top-of-atmosphere radiation poleward of 45 degrees latitude based on the provided value of annual-average net top-of-atmosphere radiation equatorward of 45 degrees latitude (+6 PW).
To approach this, we consider that the Earth is in thermal equilibrium, where the incoming solar radiation must be equal to the outgoing radiation. Using this principle, we can express the net radiation at the top of the atmosphere as the difference between incoming solar radiation and outgoing longwave radiation.
Applying this expression to both hemispheres, we obtain:
6 PW = IN (equatorward of 45 degrees latitude) - OUT (equatorward of 45 degrees latitude)
= IN (poleward of 45 degrees latitude) - OUT (poleward of 45 degrees latitude)
Let's assume the net top-of-atmosphere radiation poleward of 45 degrees be represented by x. We can then write:
6 PW = x - OUT (poleward of 45 degrees latitude)
x = OUT (poleward of 45 degrees latitude) + 6 PW
However, we encounter a problem in determining the value of outgoing longwave radiation in the polar region. The information provided does not include data for the outgoing longwave radiation poleward of 45 degrees latitude. Consequently, we cannot determine the net top-of-atmosphere radiation poleward of 45 degrees latitude. Therefore, we cannot find a specific answer to the given problem.
Learn more about outgoing longwave radiation
https://brainly.com/question/30763585
#SPJ11
A battery-operated car utilizes a 12.0 V system. Find the charge (in C) the batteries must be able to move in order to accelerate the 790 kg car from rest to 25.0 m/s, make it climb a 2.10 ✕ 10^2 m high hill, and then cause it to travel at a constant 25.0 m/s by exerting a 4.20 ✕ 10^2 N force for an hour.
The charge the batteries must be able to move in order to accelerate the 790 kg car from rest to 25.0 m/s, make it climb a 2.10 ✕ 10^2 m high hill, and then cause it to travel at a constant 25.0 m/s by exerting a 4.20 ✕ 10^2 N force for an hour is 2.3 x 10^5 C.
The work done by the battery-powered car is obtained from adding the potential and kinetic energy needed to overcome frictional forces.
W= ∆PE + ∆KE + W_friction
(1)Initial potential energy is 0. ∆PE = mgh = (790 kg)(9.8 m/s²)(210 m) = 1.64 x 10^6 J
(2)Final kinetic energy is 0.5mv² = 0.5(790 kg)(25 m/s)² = 4.94 x 10^5 J. ∆KE = 4.94 x 10^5 J
(3)Power is force times velocity.
Power = (4.20 ✕ 10² N)(25 m/s) = 1.05 x 10^4 W
(4)Time is one hour or 3600 s.
(5)The total work is the sum of ∆PE, ∆KE, and work from friction. Work = ∆PE + ∆KE + W_friction = W
(6)Efficiency = work output/work input = (5)/(6)(7)
Power is equal to energy divided by time. P = E/t
(8)Current is power divided by voltage. P = IVI = P/V
(9)Charge is current times time. Q = ItCharge (Q) = Current (I) × time (t) = Power (P) / Voltage (V) × time (t)Charge = 1.05 x 10^4 W / 12.0 V × 3,600 s
Charge = 2.3 x 10^5 C
Therefore, the charge the batteries must be able to move in order to accelerate the 790 kg car from rest to 25.0 m/s, make it climb a 2.10 ✕ 10^2 m high hill, and then cause it to travel at a constant 25.0 m/s by exerting a 4.20 ✕ 10^2 N force for an hour is 2.3 x 10^5 C.
Learn more about charge here
https://brainly.com/question/12095123
#SPJ11
A 60.0-kg skateboarder starts spinning with an angular velocity of 14 rad/s. By changing the position of her arms, the skater decreases her moment of inertia to half its initial value. What is the final angular velocity (rad/s) of the skater? Give your answer to a decimal.
The final angular velocity of the skater would be 28 rad/s.
The final angular velocity can be determined by the law of conservation of angular momentum.
As the moment of inertia decreased to half its initial value, the angular velocity of the skateboarder would increase to compensate for the change.
The law of conservation of angular momentum states that the angular momentum of a system is conserved if the net external torque acting on the system is zero.
Initial angular momentum = Final angular momentum
I1 * ω1 = I2 * ω2
Angular momentum is conserved here as there are no external torques acting on the system. The formula is as follows:
I1 * ω1 = 2I2 * ω2
Thus, the final angular velocity of the skater (ω2) can be found using the following formula:
ω2 = (I1 * ω1) / (2 * I2)
where,
I1 = initial moment of inertia = (1/2) * M * R^2= (1/2) * 60 kg * (0.5 m)^2= 7.5 kg.m^2
I2 = final moment of inertia = I1 / 2= 7.5 kg.m^2 / 2= 3.75 kg.m^2
ω1 = initial angular velocity = 14 rad/s
Substituting the given values,
ω2 = (I1 * ω1) / (2 * I2)= (7.5 kg.m^2 * 14 rad/s) / (2 * 3.75 kg.m^2)= 28 rad/s.
Therefore, the final angular velocity of the skater is 28 rad/s.
Learn more about angular velocity:
https://brainly.com/question/29566139
#SPJ11
Part C
Just like in the diagram, when Earth was primarily liquid, it separated into layers. What prediction can you make about the
densities of Earth's different layers?
When the Earth was primarily liquid, it separated into layers. The density of Earth's different layers may be predicted. For instance, it is assumed that the outermost layer, or crust, is less dense than the inner layers.
The Earth's crust is mostly composed of silicates (such as quartz, feldspar, and mica) and rocks, which are less dense than the mantle, core, or outer core.
The mantle is composed of solid rock, which is denser than the Earth's crust.
The core is the most dense layer, and it is composed of a liquid outer core and a solid inner core.
Most of the Earth's layers are composed of different types of rock and minerals.
The layers were formed from the molten material that cooled and solidified.
The Earth's layers are divided into four groups, or spheres, that represent different levels of density.
The lithosphere is the outermost layer, which includes the crust and upper mantle.
The asthenosphere is the soft layer beneath the lithosphere.
The mantle is a solid layer that surrounds the core.
The core is the Earth's central layer, consisting of a liquid outer core and a solid inner core.
For more questions on density
https://brainly.com/question/28853889
#SPJ8