Answer:
ITS CALLED RASH
Explanation:
What is missing from the solubility graph shown on the right? A graph with temperature in degrees Celsius ranging from 0 to 100 in units of 20 on the horizontal axis and unidentified tick marks from 0 to 300 in increments of 50 on the vertical axis. An orange line curves upward from 0, 90 through 50, 125 to 100, 245.
Answer:
graph title, label for the y axis, and legend explaining the orange and blue colors
Explanation:
7. Cells often store materials like water, salts, proteins and carbohydrates in sac-like structures called A. Chloroplasts. B. Lysosomes. C. Mitochondria. D. Vacuoles.
Answer:
A
Explanation:
the chloroplast holds the water , nutrients
Answer:
[tex]\boxed {\boxed {\sf D. \ Vacuoles}}[/tex]
Explanation:
First, let's examine each answer choice.
A. Chloroplasts
These structures are only found in plant cells. They are the site of photosynthesis: the process that turns water, carbon dioxide, and light energy into glucose and oxygen.B. Lysosomes
These help remove and break down cellular waste. They contain special enzymes that allow them to digest certain molecules, bacteria, and old parts of the cell.C. Mitochondria
These are famously known as the powerhouse of the cell. They create energy from glucose and oxygen in a process called cellular respiration.D. Vacuoles
Vacuoles are sacs that store substances, including water, nutrients, and waste.Since the question asks us to pick the sac-like structures that store materials in cells, choice D: vacuoles is correct.
How many moles of C6H12O6 does 8.2 x 1023 molecules represent
Answer:
i.e. mass of 1 mole of glucose, C6H12O6 = (6 × 12.01 + 12 × 1.01 + 6 × 16.00) g = 180.18 g (using atomic weight data to 2 decimals) 1 mole of carbon atoms weighs 12.01 g and there are 6 moles of C atoms in 1 mole of glucose, so the mass of carbon in 1 mole of glucose = 6 × 12.01 g = 72.06 g.
Explain why a change to the green-leaf population caused the wee-bug population to change in size?
Answer:
If there are fewer births than deaths, then the size of the population will decrease. Organisms in consumer populations get energy storage molecules from eating organisms in resource populations. The more energy storage molecules available to a population, the more the organisms in that population can reproduce.
A change to the green-leaf population caused the wee-bug population to change in size because wee-bug depends upon green leaves for their food.
What is the population?It is a group of organism of the same species living in a particular area.
The increase or decrease in the population of organisms depends upon factors such as available resources and predator population.
The green leaf is the food resource for wee bugs hence if the green leaf population increase then the wee bug's population will also be increased.
Therefore, a change to the green-leaf population caused the wee-bug population to change in size because wee-bug depends upon green leaves for their food.
Learn more about the population?
https://brainly.com/question/7979871
which of the following would remain a liquid longest as the temperature continues to drop? propane, octane, hexane, ethane
Please help me find the answer , thank you.
Answer:
the answeer is definitely silicon.
A gas bubble occupies 14.0 mL, what is this volume into L?
Researchers are confident that they can boost suberin production by this many times? This is for science btw
Black coffee has a pH of around 5. Since pH and pOH have an inverse relationship, black coffee has a pOH of ___.
Answer:
pOH = 9.
Explanation:
The inverse relationship between the pH and pOH of any given solution can be written as:
pH = 14 - pOH
Or conversely:
pOH = 14 - pH
With the above information in mind we can use the given pH to calculate the pOH:
pOH = 14 - pH
pOH = 14 - 5
pOH = 9
Thus, black coffee has a pOH of 9.
According to kinetic molecular theory, collisions between gas particles in a sample of an ideal gas 1. increase the energy content of the gas sample 2. produce strong attractive forces between the gas particles 3. result in a net loss of energy by the gas sample 4. transfer energy between the gas particles
Answer:
should you prove this or explain or pick the correct answer
According to the kinetic molecular theory, collisions between gas particles in a sample of an ideal gas: Transfer energy between the gas particles. Hence, option 4 is correct.
What is kinetic theory of gases ?According to kinetic theory of gases, when gas particles collide with each other, they transfer energy between themselves. Some collisions will result in the transfer of kinetic energy from one particle to another, while others may result in a transfer of potential energy due to the intermolecular forces between the particles.
However, the total energy of the gas particles is conserved during these collisions, so there is no net loss or gain of energy by the gas sample as a whole.
The kinetic molecular theory also states that ideal gas particles do not have any significant attractive or repulsive forces between them, so option 2 is incorrect.
Additionally, collisions between gas particles do not increase the energy content of the gas sample (option 1) or result in a net loss of energy by the gas sample (option 3).
Find more on kinetic theory:
https://brainly.com/question/14349214
#SPJ2
give a reason why it is not advisable to heat magnesium before heating ammonium nitrate
Answer:
it can result in an increasing risk of the accumulation of decomposition products, self-heating (from the heat released by the slow decomposition reactions)
Magnesium can result in an increased risk of the accumulation of decomposition products, self-heating (from the heat released by the slow decomposition reactions)
What is ammonium nitrate?Ammonium nitrate is used commonly in fertilizers; in pyrotechniques, herbicides, and insecticides; and in the manufacture of nitrous oxide.
When ammonium nitrate is heated, it decomposes exothermically into nitrous oxide and water.
Hence, Magnesium can result in an increased risk of the accumulation of decomposition products, self-heating (from the heat released by the slow decomposition reactions)
Learn more about ammonium nitrate here:
https://brainly.com/question/5148461
#SPJ2
How many grams are in 1.46 mol K2O?
Answer:
94.196 grams
Explanation:
Answer:
94.196 grams
Explanation:
can you guys help me :) ?
winner takes all
Answer:
1. Ag2CO3
2.Ba3(PO4)2
3. Cu(OH)2
4. AL
Explanation:
If 50 milliliters of 0.50 M HCl is used to completely neutralize 25 milliliters of KOH solution, what is the molarity of the base?
Answer:
0.25 M
Explanation:
Using the periodic table, determine the number of PROTONS for the element Li
A sample of a gas in a balloon has a volume of 4.20 L and temperature of 48.2 °C. Calculate the volume when
the temperature is lowered to 15.4°C at constant pressure.
a. 3.77
b. 4.20
c. 1.34
d. 13.15
e. 4.68
Answer:
V1/T1=V2/T2
4.20L/321.2K=x/288.4K
multiply both side by 288.4
1211.28/321.2=x
x=3.77L
Option 3 13.15 is the correct answer.
What is Charles law?Charles's law exists as an experimental gas law that explains how gases tend to expand when heated. A modern statement of Charles's law exists: When the pressure on a sample of a dry gas exists held constant, the Kelvin temperature and the volume will be in direct proportion.
According to Charles law
The volume occupied by a fixed amount of gas is directly proportional to its absolute temperature, if the pressure remains constant.
[tex]V1/T1=V2/T2[/tex]
Where,
[tex]V1[/tex]= first volume
[tex]V{2}[/tex] = second volume
[tex]T{1}[/tex] = first temperature
[tex]T{2}[/tex]= second temperature
Here, at constant pressure,
[tex]V1/T1=V2/T2[/tex]
[tex]V1[/tex]=4.20 L
[tex]V2[/tex]= x
[tex]T1[/tex]=321.2 K
[tex]T2[/tex]=288.4 K
Therefore, [tex]V1/T1=V2/T2[/tex]
4.20L/321.2K=x/288.4K
1211.28/321.2=x
x=3.77L
Thus option a is correct.
To learn more about Charles law refer to:
https://brainly.com/question/16927784
#SPJ2
HELP!!! WILL GIVE BRAINLYEST!!!!!! Record the Gas concentration associated with each of these time periods. (Note: ppm= parts per million)
Answer:
Explanation:
u need to go to the Greenhouse Effect Simulation (link is in ur Q).
open it and select the Greenhouse effect tab. Note that the concentration of various atmospheric gases during past eras can be determined by looking at gases trapped in ancient ice, such as that found in Antarctica.
On the right hand side panel of the simulation, under “Atmosphere during,” you can select Today, 1750, and Ice Age as historic time periods.
run simulations n collect the gas composition data.
Answer:
Explanation:
The question provides a link to the Greenhouse Effect Simulation. Results are from that:
Time Period H2O %RH CO2 ppm CH4 ppm N2O ppm
Today 58F 70% 338ppm 1843ppm 0.317ppm
1750 58F 70% 280ppm 0.730ppm 0.270ppm
Ice Age 36F ? 180ppm 380ppm 0.215ppm
is RbCl soluble or insoluble in water
Answer:
Rubidium Chloride is an excellent water soluble crystalline Rubidium source for uses compatible with chlorides.
Compound Formula: ClRb
Melting Point: 715 °C
Boiling Point: 1,390 °C
Explanation:
72.2% of element X is mass number 85. 27.8% is mass number
87. What is the average atomic mass of element X? (Round to
the correct number of significant figures.)
Answer:
11
Explanation:
HELP PLEASE
an unknown gas has a pressure of 121.6 kPa, a volume of 31 L and a Temperature of 256K. How many moles of gas
are there?
Answer:
0.031moles
Explanation:
ok so it would help if I knew the marks but 1 mole = 1000L so if the volume was 31L then if you convert you will get that answer
The moles of gas at the given sample of gas is 1.7 moles.
What is ideal gas equation?Ideal gas equation gives idea about the behavior of gas at different condition & represented as:
PV = nRT, where
P = pressure = 121.6 kPa = 1.2 atmV = volume = 31 Ln = moles = ?R = universal gas constant = 0.082 L.atm / K.molT = temperature = 256KOn putting all these values, we get moles as:
n = (1.2)(31) / (0.082)(256) = 37.2 / 20.9
n = 1.7 moles
Hence required moles of gas is 1.7 mole.
To know more about ideal gas equation, visit the below link:
https://brainly.com/question/555495
#SPJ2
HELP ASAP 10 POINTS
What type of interference caused a "super crest" to form during Young's experiment?
Constructive interference
Doppler interference
Destructive interference
Operational Interference
Answer:
the answer is destructive interference
Explain the process of photosynthesis in a well-written paragraph containing complete sentences. Use all of the following words:
xylem
phloem
carbon dioxide
stomata
sunlight
water
oxygen
sugar
Answer:
Photosynthesis is the process takes place in green plants in which the plants convert the carbon dioxide and water into the sugar molecule and oxygen in presence of the sunlight. The sunlight is trapped by the chlorophyll pigment, carbon dioxide uptake is facilitated by the stomata present on the leaves in the epidermis.
The water moves from the roots to the leaves and stem where it is used for photosynthesis and transpiration. The movement of water is through the xylem and sugar is move through the phloem from the leaves to a different part of the plant for nutrition and further process.
Argon has a pressure of 34.6 atm. It is transferred to a new tank with a volume of 456 L and pressure of 2.94 atm. What was the volume of the original container?
Answer:
38.75 L
Explanation:
From the question,
Applying Boyles Law,
PV = P'V'....................... Equation 1
Where P = Original pressure of the Argon gas, V = Original Volume of Argon gas, P' = Final pressure of Argon gas, V' = Final Volume of Argon gas.
make V the subject of the equation
V = P'V'/P.................... Equation 2
Given: P = 34.6 atm, V' = 456 L, P' = 2.94 atm.
Substitute these values into equation 2
V = (456×2.94)/34.6
V = 38.75 L
+
What category would the following amino acids be placed in and are they in the Lord
configuration? (2 marks)
COO-
A)
COO-
B)
H2N-C-H
H-C-NH3
CH2
CH2
OH
Which of the following elements has the largest atomic number?
O tellurium (Te)
lodine (0)
Otin (5)
O antimoney (5b)
Answer:
iodine is 53
tellurium is 52
antimony is 51
Otin Is 50
Explanation:
What molecules are affected by injury to the pancreas?
Answer:
Causative/sensitizing factors of pancreatic injury include refluxed bile acids, alcohol, and pH. They largely mediate downstream events such as elevated intracellular Ca2+ via influx through TRPC3 channels and release from IP3 and ryanodine-sensitive Ca2+ stores.
Explanation:
Which statement is correct?
Natural processes happen spontaneously when they decrease the entropy of a system because entropy increase is counteracted by the flow of enthalpy from high temperatures to low temperatures.
Among solids, liquids, and gases, solids generally have the highest entropy because solid particles are the least mobile, and entropy is inversely related to mobility of particles.
Any change that increases the number of particles in a system increases entropy because it increases the randomness and disorder of the system.
Dissolving table salt (NaCl) in water leads to a decrease in entropy because salt particles, which are numerous individual crystals in solid form, become a homogenous solution in water.
Answer:
Any change that increases the number of particles in a system increases entropy because it increases the randomness and disorder of the system.
Explanation:
Imagine dropping a glass pitcher on a hard surface. The pitcher breaks into numerous shards. If the shards were collected and dropped again, they would tend to break into smaller shards; they would not reassemble themselves into a pitcher. In the universe, there is a tendency for order to be replaced with disorder. This tendency is related to a concept called entropy. The formal definition of entropy is a measure of the degree of randomness and disorder in a system.
In any engineering design problem, the first step is to understand the problem and identify one or more possible solutions. In this task, you’ll analyze the problems you face as the chemical engineer challenged with setting up the ammonia-making process. Recall the chemical equation for producing ammonia:
N2 + 3H2 ⇌ 2NH3 + energy
1.Explain the problem surrounding the ammonia-making process in terms of chemical equilibrium.
Answer:
Explanation:
About 2,070 results (0.60 seconds)
Answer is: at lower temperatures the reaction rate would decrease. The lower is the temperature, the slower the reaction becomes. ... Because this is exothermic reaction (enthalpy is less than zero), at lower temperatures, the equilibrium is in favor of ammonia, but the reaction doesn't proceed at a detectable rate.
Hi,
let us go through the question again
N2 + 3H2 ⇌ 2NH3 + energy
Explain the problem surrounding the ammonia-making process in terms of chemical equilibrium.
So I would approach this question on the basis of effect of each of the reactants and products concentration on the equilibrium synthesis of ammonia.
If the concentration of any reactant is increased, the yield of ammonia is increased.
If the concentration of ammonia is reduced by removing it as it forms, the yield will as well be increased.
This reaction also yields heat meaning it is an exothermic reaction, so when we increase the temperature, the yield will be reduced. Hence it is favored by low temperature.
If 12 moles of Al2O3
are produced, how many moles of aluminum reacted?
Answer:
if 12 moles are produced then it came 24 moles of Al(OH)3
Explanation:
The number that is written in front of the molecule is called stoichiometry, represents the number of mole of that molecule. 12 moles of [tex]Al_{2}O__{3}[/tex] is produced by 24 mole of Aluminum.
What is stoichiometry?Stoichiometry is a part of chemistry that help us in making relationship between reactant and product from quantitative aspects. It tells about how much part of reactant will be required to produce particular product. Unitary method is always applied in case of stoichiometry chemistry.
The balanced equation is
[tex]4Al+3O_{2}\rightarrow 2Al_{2}O__{3}[/tex]
The mole ratio between [tex]Al_{2}O__{3}[/tex] and Al is 2:4, means to produce 4 moles of [tex]Al_{2}O__{3}[/tex] we need 2 moles of Aluminum
4 mole of [tex]Al_{2}O__{3}[/tex]= 2 moles of Aluminum
1 mole of [tex]Al_{2}O__{3}[/tex]=(1÷2) moles of Aluminum
12 moles of [tex]Al_{2}O__{3}[/tex]= 24 mole of Aluminum
Therefore 12 moles of [tex]Al_{2}O__{3}[/tex] is produced by 24 mole of Aluminum.
To learn more about stoichiometry, here:
https://brainly.com/question/28780091
#SPJ2
HELP PLEASE!!!!! 10 POINTS
What does the third quantum number (ml) describe?
Answer:
A. The specific orbital within a sublevel
Explanation:
the third quantum number is also called the magnetic quantum number ([tex]m_{l}[/tex]) and it represents the number of orbitals within a subshell.