A student wants to determine the effect of soil type on plant growth. He sets up 3 pots as shown below. Which of the following is NOT a way that the experiment can be improved?

Change the amount of water given to each plant

Make sure the plants receive the same amount of sunlight

Make sure the plants receive water with the same pH

Use the same type of plant in each pot

The balanced equation is:

2[tex]Fe^{3+}[/tex]+ 4[tex]H^{+}[/tex] + 2[tex]No_{2} ^{-}[/tex] → 2[tex]Fe^{2+}[/tex] + 2H2O + 2[tex]No_{3} ^{-}[/tex]

What is balanced equation?

To balance this redox reaction, we first need to identify which elements are being oxidized and reduced. In this case, the iron (Fe) is being reduced from a +3 oxidation state to a +2 oxidation state, while the nitrogen (N) in the nitrite ion (NO2-) is being oxidized from a +3 oxidation state to a +5 oxidation state in the nitrate ion (NO3-).

To balance the equation, we can follow these steps:

Write out the unbalanced equation:

[tex]Fe^{3+}[/tex] + [tex]No_{2} ^{-}[/tex] + H₂O → [tex]Fe^{2+}[/tex] +[tex]H^{+}[/tex] + [tex]No_{3} ^{-}[/tex]

Separate the equation into two half-reactions, one for the oxidation and one for the reduction:

Oxidation: [tex]No_{2} ^{-}[/tex] → [tex]No_{3} ^{-}[/tex]

Reduction: [tex]Fe^{3+}[/tex] → [tex]Fe^{2+}[/tex]

Balance the elements in each half-reaction by adding the appropriate number of electrons (e-):

Oxidation: 4[tex]H^{+}[/tex] + [tex]No_{2} ^{-}[/tex] + e- → [tex]No_{3} ^{-}[/tex] + 2H2O

Reduction: Fe³+ [tex]e^{-}[/tex] → [tex]Fe^{2+}[/tex]

Balance the number of electrons transferred in the two half-reactions by multiplying one or both of the half-reactions by a suitable coefficient:

Oxidation: 4[tex]H^{+}[/tex] + [tex]No_{2} ^{-}[/tex] + 2[tex]e^{-}[/tex] → [tex]No_{3} ^{-}[/tex] + 2H2O

Reduction: 2[tex]Fe^{3+}[/tex] + 2[tex]e^{-}[/tex] → 2[tex]Fe^{2+}[/tex]

Add the two half-reactions together and cancel out any common species on both sides of the equation:

2[tex]Fe^{3+}[/tex]+ 4[tex]H^{+}[/tex] + 2[tex]No_{2} ^{-}[/tex] → 2[tex]Fe^{2+}[/tex] + 2H2O + 2[tex]No_{3} ^{-}[/tex]

The balanced equation is:

2[tex]Fe^{3+}[/tex]+ 4[tex]H^{+}[/tex] + 2[tex]No_{2} ^{-}[/tex] → 2[tex]Fe^{2+}[/tex] + 2H2O + 2[tex]No_{3} ^{-}[/tex]

To know more about oxidation, visit:

https://brainly.com/question/16976470

#SPJ1

Answer:

Disproportionation reactions involve a molecule being both oxidized and reduced simultaneously, while comproportionation reactions involve two different species reacting to form a single product with an intermediate oxidation state.

For example, the reaction of hydrogen peroxide (H2O2) with potassium permanganate (KMnO4) is a disproportionation reaction, which can be represented as:

For example, the reaction of sodium thiosulfate (Na2S2O3) with iodine (I2) is a comproportionation reaction, which can be represented as:

The rate of a chemical reaction can be calculated using its rate law and the concentrations of its reactants. The rate of reaction is 7.64 x 10⁻⁵ mol L⁻¹ s⁻¹.

The rate law for the given reaction is given as:

rate = (397 mol⁻² L² s¹) [A]²[B]

where [A] and [B] are the concentrations of reactants A and B, respectively.

We are given the concentrations of A and B as 0.0615 mol L⁻¹ and 0.583 mol L⁻¹, respectively. We can substitute these values into the rate law and solve for the rate of the reaction:

rate = (397 mol⁻² L² s¹) (0.0615 mol L⁻¹)² (0.583 mol L⁻¹)

rate = 7.64 x 10⁻⁵ mol L⁻¹ s⁻¹

Therefore, the rate of the reaction is 7.64 x 10⁻⁵ mol L⁻¹ s⁻¹.

To know more about reaction please refer: https://brainly.com/question/29039149

#SPJ1

The buffer capacity for OH- is equal to the concentration of OH- added, which is [tex]1.87 × 10^-9[/tex] M.

The buffer capacity for OH- is given by the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where pH is the desired pH change, pKa is the dissociation constant of the acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the acid.

Rearranging the equation, we get:

[A-]/[HA] = [tex]10^(pH - pKa)[/tex]

In this case, CH3COOH is the acid, and NaCH3COO is its conjugate base. The dissociation constant of acetic acid (CH₃COOH) is 4.76. We can calculate the concentrations of CH₃COOH and NaCH₃COO as follows:

[CH₃COOH] = 1.0 M

[NaCH₃COO] = 0.575 M

To calculate the buffer capacity for OH-, we first need to find the pH of the buffer before adding OH-. We can use the Henderson-Hasselbalch equation to do this:

pH = pKa + log([A-]/[HA])

pH = 4.76 + log(0.575/1.0)

pH = 4.19

Now, if we add OH- to the buffer, it will react with CH₃COOH to form CH₃COO-, according to the following balanced equation:

CH₃COOH + OH- → CH₃COO- + H₂O

The concentration of OH- added to the buffer can be calculated using the pH change:

pH = 4.19 + 4.52 = 8.71

[OH-] = 10^-(pH) = 1.87 × [tex]10^-9[/tex]M

The change in concentration of CH3COOH and CH3COO- due to the addition of OH- can be calculated using stoichiometry:

Δ[CH₃COOH] = -[OH-]

Δ[CH₃COO-] = [OH-]

Therefore, the new concentrations of CH₃COOH and CH₃COO- after adding OH- are:

[CH₃COOH] = 1.0 - [OH-] = 1.0 - 1.87 ×[tex]10^-9[/tex] = 1.0 M

[CH₃COO-] = [NaCH₃COO] + [OH-] = 0.575 + 1.87 × [tex]10^-9[/tex] = 0.575 M

Using the Henderson-Hasselbalch equation, we can calculate the new pH of the buffer:

pH = pKa + log([A-]/[HA])

pH = 4.76 + log(0.575/1.0)

pH = 4.19

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ1

Answer:

To lower the impacts of climate change, we can undertake the following activities:

Invest in low-carbon technologies: Utilize renewable energy sources such as solar panels, tidal energy, wind, wave, and geothermal power to reduce greenhouse gas emissions and minimize our reliance on fossil fuels.

Improve transportation: Opt for fuel-efficient cars, electric vehicles, and better public transport systems to reduce CO2 emissions and pollution.

Adopt sustainable diets: Shift towards plant-based diets, reduce meat and dairy consumption, and support sustainable farming practices to help mitigate climate change.

Restore nature: Plant trees, engage in rewilding schemes, and protect forests and oceans to increase their natural ability to absorb carbon dioxide.

Reduce consumption and waste: Minimize consumption of energy-intensive products, reduce plastic use, and adopt energy-efficient practices in homes, such as insulating walls and roofs and using heat pumps.

The molarity of the sodium hydroxide solution is 0.09111 M.

What is Molarity?

Molarity is a measure of the concentration of a solution. It is defined as the number of moles of solute dissolved in one liter of solution.

Molarity is an important concept in chemistry because it allows us to quantify the amount of solute in a solution and to make predictions about the behavior of the solution in various chemical reactions.

First, we can calculate the number of moles of potassium hydrogen phthalate using its molecular weight:

moles of KHP = mass / molecular weight

moles of KHP = 0.600 g / 204.22 g/mol

moles of KHP = 0.002938 mol

Since one mole of KHP reacts with one mole of NaOH, we know that there are also 0.002938 moles of NaOH in the titrated solution. We can calculate the molarity of the NaOH solution using the formula:

molarity = moles of solute / volume of solution (in liters)

First, we need to convert the volume of the NaOH solution from milliliters to liters:

volume of NaOH solution = 32.21 mL = 0.03221 L

Now we can calculate the molarity of the NaOH solution:

molarity = 0.002938 mol / 0.03221 L

molarity = 0.09111 M

Learn more about Molarity from the given link

https://brainly.com/question/14469428

#SPJ1

Answer:

Great question! Here are four body systems that are used when taking a test and how each helps: 1. Nervous system: The nervous system is responsible for processing information and responding to stimuli. It plays a crucial role in test-taking by allowing students to process and understand the questions being asked, recall the relevant information, and formulate responses. 2. Cardiovascular system: The cardiovascular system circulates blood throughout the body, providing oxygen and nutrients to the brain and other organs. During a test, the cardiovascular system helps to maintain focus and mental clarity by providing the brain with the energy it needs to function optimally. 3. Respiratory system: The respiratory system is responsible for taking in oxygen and expelling carbon dioxide. Proper breathing is essential during test-taking because it helps to reduce stress and anxiety, and provides oxygen to the brain, which is necessary for clear thinking. 4. Muscular system

Four key body systems that are used when taking a test are Nervous System, Circulatory System, Respiratory System, Musculoskeletal System

Nervous System: The nervous system is crucial for cognitive processes, including memory, attention, and problem-solving.

Circulatory System: The circulatory system, consisting of the heart, blood vessels, and blood, plays a vital role in delivering oxygen and nutrients to the brain.

Respiratory System: The respiratory system is responsible for supplying oxygen to the body and eliminating carbon dioxide.

Musculoskeletal System: The musculoskeletal system, consisting of bones, muscles, and joints, supports posture and physical stability during the test.

Hence, four body systems are explained above.

Learn more about body systems here:

https://brainly.com/question/13258877

#SPJ 2

The percentage yield of the reaction is 99.5%.

Percentage yield is the ratio of the actual yield of a reaction to the theoretical yield, expressed as a percentage. It is a measure of the efficiency of a reaction and indicates how much of the desired product was obtained relative to the amount that could have been produced under ideal conditions.

The yield of a chemical reaction can be affected by a variety of factors, including the purity and amount of the reactants, the conditions under which the reaction occurs (e.g. temperature, pressure, and reaction time), and the efficiency of the reaction process (e.g. whether the product is recovered efficiently).

Other factors that can affect yield include the presence of impurities or side reactions, the stability of the reactants and products, and the skill and experience of the person carrying out the reaction.

To know more about yield,visit:

https://brainly.com/question/30700754

#SPJ1

Without more information about the specific experiment, it is difficult to provide a definitive answer to this question. However, based on the limited information provided, it seems that the experiment involves placing water samples from Detroit and Flint into separate beakers, stirring them, and then introducing a metal coil into each beaker.

What is Metal?

Metal is a type of element characterized by its shiny appearance, malleability, ductility, and ability to conduct heat and electricity. Metals are typically solid at room temperature (except for mercury, which is a liquid) and have a high melting and boiling point.

If the metal coil is made of a reactive metal such as iron, zinc, or aluminum, and the water contains dissolved oxygen and other ions, then the metal coil may undergo a chemical reaction with the water. This could result in the formation of metal ions and the release of hydrogen gas. The metal ions and other reaction products could then combine with other compounds in the water to form insoluble precipitates, which could appear as a cloudy or turbid solution.

Learn more about Metal from the given link

https://brainly.com/question/4701542

#SPJ1

For a 1-gram piece of magnesium, the amount of MgO produced by Mg is less than the amount produced by O2. Therefore, Mg is the limiting reactant and O2 is in excess.

For a 1000-gram piece of magnesium, the amount of MgO produced by Mg is still less than the amount produced by O2, even though there is a lot more Mg present. Therefore, Mg is still the limiting reactant and O2 is in excess.

To determine which reactant is limiting and which is in excess, we need to calculate the amount of product that each reactant can produce and compare them.

For a 1-gram piece of magnesium:

Moles of Mg = mass/Molar mass = 1 g/24.31 g/mol = 0.041 moles

Moles of O2 = volume x pressure/RT = (22.4 L at STP x 1 atm)/(0.0821 L·atm/mol·K x 273 K) = 1.0 moles

According to the balanced equation, 2 moles of Mg reacts with 1 mole of O2 to produce 2 moles of MgO

Therefore, the amount of MgO produced by 0.041 moles of Mg would be (2/2) x 0.041 moles = 0.041 moles

The amount of MgO produced by 1 mole of O2 would be (2/1) x 0.041 moles = 0.082 moles

We can see that the amount of MgO produced by Mg is less than the amount produced by O2. Therefore, Mg is the limiting reactant and O2 is in excess.

For a 1000-gram piece of magnesium:

Moles of Mg = mass/Molar mass = 1000 g/24.31 g/mol = 41.1 moles

Moles of O2 = volume x pressure/RT = (22.4 L at STP x 1 atm)/(0.0821 L·atm/mol·K x 273 K) = 1.0 moles

According to the balanced equation, 2 moles of Mg reacts with 1 mole of O2 to produce 2 moles of MgO

Therefore, the amount of MgO produced by 41.1 moles of Mg would be (2/2) x 41.1 moles = 41.1 moles

The amount of MgO produced by 1 mole of O2 would be (2/1) x 41.1 moles = 82.2 moles

We can see that the amount of MgO produced by Mg is still less than the amount produced by O2, even though there is a lot more Mg present. Therefore, Mg is still the limiting reactant and O2 is in excess.

learn more about limiting reactant here

https://brainly.com/question/26905271

#SPJ1

Answer:

D

The temperature an object would be if its molecules were completely still. Absolute zero is the lowest possible temperature that can be achieved, at which the particles of matter would have zero thermal energy and all molecular motion would stop.

Answer:

Ethane(C2H6) reacts with oxygen gas to produce carbon dioxide and water.

Answer:

the concentration of sodium nitrate in the solution is 0.470 M.

Explanation:

To calculate the concentration of sodium nitrate in the solution, we need to first convert the mass of solid sodium nitrate to moles. We can do this using the molar mass of NaNO3, which is 85.0 g/mol:

moles NaNO3 = mass NaNO3 / molar mass NaNO3

moles NaNO3 = 2.00 g / 85.0 g/mol

moles NaNO3 = 0.0235 mol

Next, we need to calculate the total volume of the solution in liters, since concentration is usually expressed in moles per liter (M):

volume solution = 50.0 mL / 1000 mL/L

volume solution = 0.0500 L

Finally, we can use the moles of sodium nitrate and the total volume of the solution to calculate the concentration in moles per liter:

[NaNO3] = moles NaNO3 / volume solution

[NaNO3] = 0.0235 mol / 0.0500 L

[NaNO3] = 0.470 M

Therefore, the concentration of sodium nitrate in the solution is 0.470 M.

The vapor pressure of the solution at 30°C is 0.9676781. The pressure that a vapor exerts on its condensed phases (solid or liquid) in a closed system at a specific temperature is known as vapor pressure.

The pressure of the solvent above the solution is known as the vapour pressure of a solution. Temperature, ambient pressure, and solute concentration all have an impact on a solution's vapour pressure. A manometer or a barometer can be used to determine a solution's vapour pressure. When a liquid is contained in a closed container, its molecules frequently crash into the walls of the container. Due to these collisions, the container's walls experience pressure equal to the liquid's vapour pressure.

Solution of P = (0.9677 x 31.8 mmHg)

P solution = 30.8 mmHg

X Solvent = 34.63588 mol/1.156 + 34.635

X Solvent = 0.9676781

learn more about vapor pressure here:
https://brainly.com/question/11864750

#SPJ1

Answer:

a. The chemical equation for the reaction between CaI2 and K2SO4 is:

CaI2 + K2SO4 → 2 KI + CaSO4

The solubility product constant (Ksp) for CaSO4 is 2.4 x 10^-5 at 25°C.

Using the Ksp expression for CaSO4, we can write:

Ksp = [Ca2+][SO42-]

Let x be the concentration of Ca2+ ions in the solution. Then, the concentration of SO42- ions will also be x, since the reaction is 1:1. Substituting into the Ksp expression, we get:

Ksp = x^2

Solving for x, we get:

x = sqrt(Ksp) = sqrt(2.4 x 10^-5) = 0.0049 M

Therefore, the minimum concentration of CaI2 needed to cause precipitation is 0.0049 M.

b. The chemical equation for the reaction between AgNO3 and RbCl is:

AgNO3 + RbCl → AgCl + RbNO3

The solubility product constant (Ksp) for AgCl is 1.8 x 10^-10 at 25°C.

Using the Ksp expression for AgCl, we can write:

Ksp = [Ag+][Cl-]

Let x be the concentration of Ag+ ions in the solution. Then, the concentration of Cl- ions will also be x, since the reaction is 1:1. Substituting into the Ksp expression, we get:

Ksp = x^2

Solving for x, we get:

x = sqrt(Ksp) = sqrt(1.8 x 10^-10) = 1.34 x 10^-5 M

Therefore, the minimum concentration of AgNO3 needed to cause precipitation is 1.34 x 10^-5 M.

Answer:

2.67 x 10^-4 M & 8.85 x 10^-8 M

Explanation:

The minimum concentration of the precipitating agent required to cause precipitation of the cation from the solution can be determined using the solubility product constant (Ksp) of the salt that would be formed. The Ksp is an equilibrium constant that represents the maximum amount of solid that can dissolve in water to form a saturated solution.

For part a, calcium iodide (CaI2) and potassium sulfate (K2SO4) are mixed. The reaction that occurs is:

CaI2(aq) + K2SO4(aq) → CaSO4(s) + 2KI(aq)

The solubility product constant for calcium sulfate (CaSO4) is 2.4 x 10^-5. Let x represent the minimum concentration of K2SO4 required to cause precipitation. The concentration of Ca2+ ions in solution is 9.0 x 10^-2 M. The Ksp expression for CaSO4 is:

Ksp = [Ca2+][SO42-]

Substituting the known values gives:

(2.4 x 10^-5) = (9.0 x 10^-2)(x)

Solving for x gives:

x = (2.4 x 10^-5)/(9.0 x 10^-2)

x = 2.67 x 10^-4 M

So, the minimum concentration of K2SO4 required to cause precipitation of CaSO4 is 2.67 x 10^-4 M.

For part b, silver nitrate (AgNO3) and rubidium chloride (RbCl) are mixed. The reaction that occurs is:

AgNO3(aq) + RbCl(aq) → AgCl(s) + RbNO3(aq)

The solubility product constant for silver chloride (AgCl) is 1.77 x 10^-10. Let y represent the minimum concentration of RbCl required to cause precipitation. The concentration of Ag+ ions in solution is 2.0 x 10^-3 M. The Ksp expression for AgCl is:

Ksp = [Ag+][Cl-]

Substituting the known values gives:

(1.77 x 10^-10) = (2.0 x 10^-3)(y)

Solving for y gives:

y = (1.77 x 10^-10)/(2.0 x 10^-3)

y = 8.85 x 10^-8 M

So, the minimum concentration of RbCl required to cause precipitation of AgCl is 8.85 x 10^-8 M.

In comparison to the "P" alkalinity, the "T" alkalinity will be higher.

The "P" alkalinity of a sample is determined by the amount of hydrogen ions ([tex]H^+[/tex]) that are neutralized by the anions present. The "T" alkalinity of a sample is determined by the amount of hydroxide ions ([tex]OH^-[/tex]) that are neutralized by the cations present. In a sample where the only anion contributing to alkalinity is hydroxide ion, [tex]OH^-[/tex], the "P" alkalinity will be zero since there are no hydrogen ions ([tex]H^+[/tex]) to be neutralized. However, the "T" alkalinity will be equal to the amount of hydroxide ions ([tex]OH^-[/tex]) present since all of the [tex]OH^-[/tex] ions will be neutralized by the cations present. Therefore, in this case, the "T" alkalinity will be greater than the "P" alkalinity.

learn more about hydroxide ions Refer:brainly.com/question/14619642

#SPJ1

The numerical value of Kc for this reaction is 0.0804 if a 2.00 mol sample of A is sealed in a 1.00 L flask and allowed to reach equilibrium with B and C. The equilibrium concentration of B is found to be 0.39 M.

The equilibrium constant expression for the reaction A (g) ⇔ B (g) + C (g) is:

Kc = [B] [C] / [A]

where [A], [B], and [C] are the molar concentrations of A, B, and C at equilibrium, respectively.

We are given that the equilibrium concentration of B is 0.39 M. However, we are not given the equilibrium concentration of A or C. To solve for Kc, we need to find the equilibrium concentrations of all three species.

Since the reaction is in a 1.00 L flask and we started with a 2.00 mol sample of A, the initial concentration of A is 2.00 M. At equilibrium, the concentration of A will be equal to (2.00 - [B]) M, and the concentration of C will also be equal to [B] M (because the stoichiometric coefficients for B and C are equal).

Substituting these values into the equilibrium constant expression, we get:

Kc = (0.39 M)^2 / (2.00 M - 0.39 M) = 0.0804

Therefore, the numerical value of Kc for this reaction is 0.0804.

Learn more about equilibrium here

https://brainly.com/question/30807709

#SPJ1

The final balanced chemical equation is:

C₉H₂₀(l) + 14O₂(g) → 9CO₂(g) + 10H₂O(l)

A balanced chemical equation is a representation of a chemical reaction using chemical formulas and coefficients to show the reactants and products involved in the reaction.

To balance a chemical equation, coefficients are placed in front of the chemical formulas to ensure that the number of atoms of each element is equal on both sides of the equation. This results in a balanced equation that accurately represents the reactants and products involved in the reaction, and their relative amounts.

To balance the chemical equation, we need to make sure that the number of atoms of each element is the same on both sides of the equation.

Let's start by counting the number of atoms of each element in the reactants and products:

Reactants:

C₉H₂₀(l) → 9 carbon atoms (C), 20 hydrogen atoms (H)

O₂(g) → 2 oxygen atoms (O) per molecule, so 14 O₂ molecules give 28 oxygen atoms (O)

Products:

9CO₂(g) → 9 carbon atoms (C), 18 oxygen atoms (O)

10H₂O(l) → 20 hydrogen atoms (H), 10 oxygen atoms (O)

Now, we can see that the number of carbon and hydrogen atoms are already balanced, but we need to balance the oxygen atoms.

To do so, we can see that 14 O₂ molecules give us 28 oxygen atoms, which means we need 28/2 = 14 molecules of CO₂ and 14 molecules of H₂O to balance the equation.

The final balanced equation is:

C₉H₂₀(l) + 14O₂(g) → 9CO₂(g) + 10H₂O(l)

Learn more about reaction here:

https://brainly.com/question/28984750

#SPJ1

Layer 1 because it is closest to the surface

The correct conclusion is that the amount of water affects the mass and the height. This is evidenced by the data in the table, which shows that the plant in Pot B (which received more water) had more mass and was taller after 50 days of growth than the plant in Pot A.

Mass is a measure of the amount of matter an object contains. It is expressed in terms of a unit of measurement such as kilograms or pounds. Mass is different from weight, which is a measure of the force of gravity acting on an object. Mass is a constant, while weight can vary depending on the gravitational pull of the planet or other body on which the object is located. Mass is an intrinsic property of matter and is not affected by temperature or pressure. Mass is related to inertia, which is the resistance of an object to changes in its motion.

To learn more about mass
https://brainly.com/question/24191825
#SPJ1

Based on public policy, the most recent scientific findings, and efficient management, we give leadership on matters relating to food, agriculture, energy wealth, rural development, nutrition, & related topics.

A few examples of how biotechnology is influencing medicine are synthetic growth hormone and insulin as well as diagnostic procedures to find various ailments. The improvement of industrial procedures, environmental remediation, and agricultural production have all benefited from the use of biotechnology.

The demand for biotechnology is growing in industries including pharmaceutical, animal husbandry, agricultural, healthcare, medicine, genetic engineering, etc. In addition, biotechnologists are well compensated for their work. Thus, it is undoubtedly a smart professional choice.

To know more about Biotechnology visit:

https://brainly.com/question/28609422

#SPJ1

Answer:

the sodium hydroxide solution was 0.4 M.

Explanation:

To solve this problem, we can use the dilution formula:

M1V1 = M2V2

where M1 is the initial concentration, V1 is the initial volume, M2 is the final concentration, and V2 is the final volume.

We are given that 45.0 mL of a sodium hydroxide solution was diluted and the resulting volume is 180 mL with a concentration of 0.100 M. Let's use M1 for the initial concentration, V1 for the initial volume, M2 for the final concentration, and V2 for the final volume.

M2 = 0.100 M

V1 = 45.0 mL

V2 = 180 mL

We can rearrange the dilution formula to solve for M1:

M1 = (M2V2) / V1

Substituting the given values, we get:

M1 = (0.100 M x 180 mL) / 45.0 mL

M1 = 0.400 M

Therefore, the initial molarity of the sodium hydroxide solution was 0.4 M.

Answer:

the molarity of the HCl is 1.17 M.

Explanation:

The balanced chemical equation for the reaction between HCl and NaOH is:

HCl + NaOH -> NaCl + H2O

From the equation, we can see that one mole of HCl reacts with one mole of NaOH to produce one mole of NaCl and one mole of water.

First, let's calculate the number of moles of NaOH used:

moles of NaOH = Molarity x Volume in liters

moles of NaOH = 0.650 M x 0.0900 L

moles of NaOH = 0.0585 mol

Since the reaction between HCl and NaOH is a 1:1 stoichiometry, the number of moles of HCl is also equal to 0.0585 mol.

Now, we can use the number of moles of HCl and the volume of HCl to calculate the molarity:

Molarity of HCl = moles of HCl / Volume in liters

Molarity of HCl = 0.0585 mol / 0.0500 L

Molarity of HCl = 1.17 M

Therefore, the molarity of the HCl is 1.17 M.

To calculate the heat gained by the cold liquid, we need to use the formula: q = m * c * ΔT

where q is the heat gained or lost by the substance, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature of the substance.

Let's assume that we have a cold liquid with a mass of 100 grams and an initial temperature of 10°C. We then add 50 grams of a hot solid that has been heated to 80°C. After the solid and liquid are allowed to equilibrate, the final temperature of the mixture is 20°C.

We can first calculate the heat lost by the hot solid using the same formula:

q = m * c * ΔT

q = 50 g * 0.385 J/g°C * (80°C - 20°C)

q = 15400 J

The negative sign indicates that the solid lost heat to the colder liquid.

To calculate the heat gained by the cold liquid, we can use the same formula and the final temperature of the mixture:

q = m * c * ΔT

q = 100 g * 4.184 J/g°C * (20°C - 10°C)

q = 4184 J

Therefore, the heat gained by the cold liquid is 4184 J.

The complete question is :

Use the equation qliquid = m × c × ΔT to calculate the heat gained by the cold liquid. Use the specific heat for the liquid you selected.

Use the equation qwater = m × c × ΔT to calculate the heat lost by the hot water. Show your work using the problem-solving method shown in previous rubrics.

Learn more about specific heat capacity here:

https://brainly.com/question/29766819

#SPJ1

Answer:

95.5 g/mol

Explanation:

To find the molar mass of the solute, we need to first calculate the number of moles of the solute in the solution.

Number of moles of solute = concentration x volume

We are given the concentration (0.400 m) and the volume (500 grams) of the solution, but we need to convert the mass of water to volume. We can do this using the density of water:

Density of water = 1 g/mL

Volume of water = mass of water / density of water = 500 g / 1 g/mL = 500 mL

Now we can calculate the number of moles of solute:

Number of moles of solute = 0.400 m x 500 mL = 200 mmol

Next, we need to find the mass of the solute:

Mass of solute = number of moles x molar mass

We are given the number of moles (200 mmol), so we can rearrange the equation to solve for the molar mass:

Molar mass = mass of solute / number of moles

Molar mass = 19.10 g / 200 mmol = 95.5 g/mol

Therefore, the molar mass of the solute is 95.5 g/mol.

Hopes this helps

The number of moles of CO contained in the 20.0 L tank at 93 °C and 4.52 atm is 3.01 moles (3rd option)

First, we shall list out the given parameters from the question. Details below:

We can obtain the number of mole in the tank as follow:

PV = nRT

4.52 × 20 = n × 0.0821 × 366

90.4 = n × 30.0486

Divide both sides by 30.0486

n = 90.4 / 30.0486

n = 3.01 moles

Thus, we can conclude that the number of mole of the gas is 3.01 moles (3rd option)

Learn more about number of mole:

https://brainly.com/question/29927685

#SPJ1

An endothermic reaction absorbs heat from the surroundings, so heat is a reactant in this case. According to Le Chatelier's principle, when a system in equilibrium is subjected to a change, it will adjust to counteract that change and maintain equilibrium.

What is Endothermic Reaction?

An endothermic reaction is a chemical reaction that absorbs heat from its surroundings. In other words, the reaction requires energy in the form of heat to proceed, and the energy is absorbed from the surrounding environment, making it feel colder. Endothermic reactions usually have a positive enthalpy change, which means that the products have more energy than the reactants.

To shift the equilibrium of an endothermic reaction to the left, we need to remove heat, which can be achieved by decreasing the temperature. Therefore, the correct answer is (c) Decrease the temperature of the system.

Learn more about Endothermic Reaction from the given link

https://brainly.com/question/6506846

#SPJ1

The molarity of the sodium hydroxide solution is 0.0911 M.

we need to calculate the number of moles of potassium hydrogen phthalate:

moles of KHP = mass / molar mass = 0.600 g / 204.22 g/mol = 0.00294 mol

Since one mole of KHP reacts with one mole of NaOH, we know that there are 0.00294 moles of NaOH used in the titration. We can use this information to calculate the molarity of the NaOH solution:

molarity of NaOH = moles of NaOH / volume of NaOH used in liters

We need to convert the volume of NaOH from milliliters to liters:

volume of NaOH = 32.21 mL = 0.03221 L

Now we can calculate the molarity of NaOH:

molarity of NaOH = 0.00294 mol / 0.03221 L = 0.0911 M

The molarity of the sodium hydroxide solution is 0.0911 M.

learn more about Molarity here

https://brainly.com/question/30404105

#SPJ1

Fe²⁺ is the reducing agent since in the given redox reaction it loses electrons which are transferred to another species.

A reducing agent, also known as a reductant, is a substance that causes a reduction in another substance by donating electrons or by removing oxygen from the substance being reduced. In other words, it is a substance that facilitates a chemical reaction by undergoing oxidation itself.

A reducing agent is typically an electron donor and is oxidized during the reaction. Examples of reducing agents include metals like zinc, hydrogen gas, and organic compounds like alcohols and sugars.

Learn more about reducing agents here:

https://brainly.com/question/2890416

#SPJ1