The potential difference across the each bulb and the current entering each bulb.
What occurs if you connect two light bulbs in series?Each bulb in a straightforward parallel circuit receives the entire battery power. This is explains why the parallel circuit's lights will shine stronger than the series circuit's. The parallel circuit also has the benefit of maintaining an electricity even if one loop is disconnected.
When are two identical bulbs linked in both series and parallel?The same brightness is produced when two identical bulbs are linked in parallel as it is when they are connected in a series, which is why.
To know more about potential difference visit:-
https://brainly.com/question/12198573
#SPJ1
Hot air moves into a valley, causing a hot day. Which method of heat transfer is this an example of?
Group of answer choices
Radiation
Kinetic energy
Conduction
Convection
The weighted rod floats with with 6cm of its length under water density (1000kg m3) .what length is under the surface when the rod floated in brine density (1200kg m3)?
The length of the rod under the surface of the water can be calculated using Archimedes’ principle. The principle states that the buoyant force on an object is equal to the weight of the fluid displaced by the object.
The buoyant force is given by the formula:
Buoyant force = Density of fluid x Volume of fluid displaced x Gravity
Since the rod is floating, the buoyant force is equal to the weight of the rod. We can use this to calculate the volume of fluid displaced by the rod.
Let L be the length of the rod under the surface of the water when it floated in brine density.
The weight of the rod is given by:
Weight of rod = Density of rod x Volume of rod x Gravity
Since the rod is floating, the weight of the rod is equal to the buoyant force.
Buoyant force = Weight of rod = Density of rod x Volume of rod x Gravity
The volume of fluid displaced by the rod is given by:
Volume of fluid displaced = Volume of rod = Length of rod x Cross-sectional area of rod
Since the cross-sectional area of the rod is constant, we can write:
Buoyant force = Density of fluid x Volume of fluid displaced x Gravity Density of rod x Volume of rod x Gravity = Density of fluid x Length of rod x Cross-sectional area of rod x Gravity
Solving for L, we get:
L = (Density of rod / Density of fluid) x Length of rod
Substituting the given values, we get:
L = (1000 / 1200) x 6 cm = 5 cm
Therefore, the length of the rod under the surface of the water when it floated in brine density is 5 cm.
To know more about Archimedes’ principle, visit :
https://brainly.com/question/787619
#SPJ1
in this experiment you need to examine the idea of thermal energy transfer. Using a controlled experiment what might a good question about the variables that affect thermal energy transfer be? Therapist energy transfer depends on many properties, but limit your question to only two
The thermal conductivity of a material and the temperature differential between two objects affect the rate of thermal energy transfer between them would be an excellent question on the factors that influence thermal energy transfer.
What is an example of regulating the passage of thermal energy?The amount of radiant energy that enters a residence in the winter is maximised by large windows that face south. Tiny windows that face north help keep heat in. Triple-paned windows minimise thermal energy loss.
What elements influence the transfer of thermal energy?The surface area, volume, material, and kind of the surface the object is in touch with are all factors that affect how quickly an object transfers energy by heating.
To know more about thermal energy visit:-
https://brainly.com/question/14515276
#SPJ9
A stick is resting on a concrete step with 1/7 of its total length hanging over the edge. A single ladybug lands on the end of the stick hanging over the edge, and the stick begins to tip. A moment later, a second, identical ladybug lands on the other end of the stick, which results in the stick coming momentarily to rest at theta = 67.3 degrees with respect to the horizontal, as shown in the figure. If the mass of each bug is 3.09
times the mass of the stick and the stick is 11.5 cm long, what is the magnitude of the angular acceleration of the stick at the instant shown? Use =9.81 m/s2.
Let the stick be divided into two parts, A and B, by the point where the two ladybugs are sitting. Let the length of part A be x and the length of part B be (1-x). Then, we have:
x + (1-x) = 1
Let the distance of the midpoint from the end of part A be d. Then, we have:
d = x/2 - (1/7)
Let the mass of the stick be M and the mass of each ladybug be m. Then, we have:M = 7m
The gravitational force acting on the system produces a clockwise moment about the end of part A, which is given by:
Mg(x/2 - d) = Mg(x/2 - (x/2 - 1/7)) = Mg/7
Let the distance of the first ladybug from the end of part A be L1 and the distance of the second ladybug from the end of part A be L2. Then, we have:
L1 = x
L2 = 1 - (1-x) = x
The moments produced by the ladybugs are given by:
mgL1sinθ
mgL2sinθ
mgL1sinθ = mgL2sinθ = Mg/7
Substituting the given values and solving for θ, we get:
sinθ = M/14m = 1/14
θ = 3.87 degrees
Mg(x/2 - d)sinθ
2mgL1sinθ
Substituting the given values and solving for x, we get:
x = 0.315
Substituting this value into the equation for the moment of inertia, we get:
I = 1.08e-5.
What is an inertia ?Inertia is the property of an object to resist any change in its state of motion. It is a measure of an object's resistance to changes in its velocity, including changes in direction and speed. Objects with more mass have more inertia, and they require more force to be moved or to stop moving. Inertia is described by Newton's first law of motion, which states that an object at rest will remain at rest, and an object in motion will remain in motion with a constant velocity, unless acted upon by an external force.
To know more about inertia visit :
https://brainly.com/question/3268780
#SPJ1
URGENT PLEASE HELP 100 POINTS AND BRAINLIEST!
Physics Essay
Pick one of the sources of energy and write an essay on why you think that source of
energy is better than the rest.
Discuss why the other sources of energy are not as beneficial as the one you chose. (This
step will be important for the debate).
You can write the essay by hand or type it. If you choose to type the essay it should be 12
pt font and double spaced.
There is no page limit, however you should have at least 3 paragraphs and you should
provide enough details that I can recognize why you chose that source of energy and
what the benefits of using that source of energy are. Also remember you need to have
some sort of counter argument on why other types of energy are not as beneficial as the
one that you chose.
Do not plagiarize your essay. If you plagiarize you WILL get a 0.
Make sure to cite any sources that you use to write this paper.
Solar energy is an increasingly popular form of energy that is quickly becoming more efficient and cost effective than other sources of energy.
What is energy?Energy is the capacity of a physical system to do work. It is a property of objects which can be transferred to other objects or converted into different forms, but cannot be created or destroyed. Energy can take the form of kinetic, potential, thermal, electrical, chemical, nuclear, or other various forms.
Solar energy is an abundant, renewable source of energy that can be used to power homes, businesses, and other applications without harming the environment. Solar energy is produced when energy from the sun is captured and converted into electricity. This electricity can be used to power everyday appliances and other activities.
Solar energy has many advantages over other forms of energy. For starters, it is a clean form of energy that does not create any air or water pollution. Additionally, solar energy does not require any finite resources, such as coal or oil, to produce. This means that solar energy is an inexhaustible source of energy and is able to provide an unlimited amount of power. Solar energy is also very cost effective compared to other sources of energy. Solar installations require a significant upfront cost, but the savings in energy costs can be significant.
To learn more about energy
https://brainly.com/question/13881533
#SPJ1
How much force is needed to accelerate a 70kg table at a rate of 4 m/s
Answer:
F = 280 NExplanation:
To determine the force needed to accelerate a 70 kg table at a rate of 4 m/s², we can use Newton's second law of motion, which states that force (F) is equal to mass (m) times acceleration (a).
So, we can calculate the force (F) required using the following formula:
F = m x awhere F is the force in Newtons (N), m is the mass in kilograms (kg), and a is the acceleration in meters per second squared (m/s²).
Plugging in the given values, we get:
F = 70 kg x 4 m/s²F = 280 NTherefore, the force needed to accelerate a 70 kg table at a rate of 4 m/s² is 280 Newtons.please use strictly python and only euler-cromer method
thank you
Answer:
Driven pendulum = 2.0 f =0.2 q =1.0
A long, cylindrical solenoid with 100 turns per centimeter has a radius of 1.5 cm. (a) Neglecting end effects, what is the self-inductance per unit length of the solenoid? (b) If the current through the solenoid changes at the rate 5.0 A/s, what is the emf induced per unit length?
The solenoid's induced emf is 0.011 V/m per unit length. Be aware that the negative sign denotes an opposition to the change in current in the direction of the induced emf.
What is the amount of induced emf per unit length if the current through the solenoid changes at a rate of 5.0 A/s?Faraday's law of induction provides the emf induced per unit length in a solenoid as follows:
ε = -N(dΦ/dt)
A solenoid's magnetic flux is determined by:Φ = μ₀n²AI
where I is the solenoid's current (passing through it).
When we adjust for time in both sides of this equation, we obtain:
dI/dt = 0n2A(dd)
When we add this to Faraday's law, we obtain:
= -0n2A(dI/dt)N
Inputting the values provided yields:
= - (4 10 7 T m/A) (100 000 turns/m)² (7.07×10^−4 m²)(5.0 A/s)
ε = - 0.011 V/m
To learn more about emf visit:
brainly.com/question/15121836
#SPJ1
Place these events in order to demonstrate the steps in how sound travels.
You kick a stone and it starts to roll.
In turn, those air molecules set more air molecules in motion.
As the stone starts to move, it stirs up air molecules around it.
The first air molecules to move shake up the other air molecules around them.
Pls help me
Answer:
(1) you kick the stone
(2) air molecules are set in motion
(3) the first molecules set other molecules in motion
(4) these moving molecules set other molecules in motion
Can you answer this question?
a) The multimeter in figure 2(a) is set up to measure DC voltage. The setting is indicated by the V with a straight line above it, which stands for "DC voltage".
b) The multimeter in figure 2(a) reads 25.6 V (volts).
c) The multimeter in figure 2(b) is set up to measure DC current. The setting is indicated by the A with a straight line above it, which stands for "DC current".
d) The multimeter in figure 2(b) reads 0.40 A (amperes).
What is multimeter?
A multimeter is an electronic instrument that is used to measure electrical parameters such as voltage, current, and resistance. Multimeters can measure AC and DC voltage, AC and DC current, resistance, continuity, capacitance, and frequency.
What is DC volage?
DC voltage refers to the level or strength of a direct current (DC) electrical signal. Direct current is a type of electrical current that flows in one direction only and does not alternate in polarity. DC voltage can be measured using a multimeter or other voltage measurement instrument, and is typically expressed in volts (V). DC voltage is commonly used in many electronic devices and systems, such as batteries, power supplies, and DC motors.
To know more about the multimeter, visit:
https://brainly.com/question/29442319
#SPJ1
In an old-fashioned camera, the light sensitive film is placed 2.8 cm behind the camera lens, so that it gives a magnification of 1.2 × 103. The image of a tree on the film is 2.3 cm high. How tall was the real tree?
The height of the real tree is 1.92 × 10^-3 cm.
We can use the magnification formula to solve this problem. The magnification formula relates the size of the object to the size of its image and is given by: magnification = size of image/size of the object
In this case, the magnification is given as 1.2 × 10^3, the size of the image is 2.3 cm, and we want to find the size of the object, which is the height of the tree. So we can rearrange the formula to solve for the size of the object: the size of the object = size of the image/magnification
Substituting the given values, we get:
size of object = 2.3 cm / 1.2 × 10^3 = 1.92 × 10^-3 cm
So the height of the real tree is 1.92 × 10^-3 cm.
To learn more about calculating light, refer to:
https://brainly.com/question/30783532
A spring is holding a door open. What type of energy is in the compressed spring?
Group of answer choices
Chemical energy
Spring potential energy
Kinetic energy
Elastic potential energy
Assuming all objects are moving with the same velocity, which statement describes the object with the smallest inertia?
A bowling ball rolls across a street and into a large soccer field.
A driver continues forward after his car takes a sharp turn.
A helicopter is following a high-speed pursuit across town.
A pebble is thrown in space and continues in a straight line.
A pebble is thrown in space and continues in a straight line. Hence, the correct option is (d). When all objects are moving with same velocity.
Inertia is the resistance of an object to changes in its motion, and it depends on the object's mass. The smaller the mass of an object, the smaller its inertia. In option (d), the pebble has the smallest mass and therefore the smallest inertia among the objects described. The driver in option (b) experiences a force that changes the direction of his motion, so his inertia is greater than that of the pebble. In option (c), the helicopter is actively moving and changing its velocity, so its inertia is greater than that of the pebble. In option (a), the bowling ball has a much larger mass than the other objects and therefore greater inertia.
Therefore, option (d) - A pebble is thrown in space and continues in a straight line - describes the object with the smallest inertia assuming all objects are moving with the same velocity.
To know more about velocity please refer: https://brainly.com/question/13334806
#SPJ1
**NEED ANSWER ASAP**
Identify the constellation, label any of the names stars or asterisms that were covered in class
Answer: I believe this constellation is cygnus, the swan. The brightest star is Deneb at the tail. The bright double star at the head of the swan is Albireo.
Explanation:
If light passing through a medium with an index of refraction of 1.0 enters a medium with an index or refraction of 1.45, the beam will…
A. refract away from the normal in the new medium
B. refract towards the normal in the new medium
C. reflect and remain in the first medium
D. pass through without refracting
Answer:
correct option is B . toward the normal .
Explanation:
as we know , if the ray will pass from denser to rarer mediu, the ray will bend away from the normal
If light passing through a medium with an index of refraction of 1.0 enters a medium with an index or refraction of 1.45, Then the beam will refract towards the normal in the new medium. The correct answer is B.
What is the refractive index?The refractive index is a measure of how much a material bends or refracts light as it passes through it. It is defined as the ratio of the speed of light in a vacuum to the speed of light in the material:
n = c/v
Where
n = is the refractive index of the material,
c = is the speed of light in a vacuum (approximately 299,792,458 meters per second),
v = is the speed of light in the material.
The refractive index of a material is an important property that determines how much light is bent as it passes through the material. Materials with a higher refractive index bend light more than materials with a lower refractive index.
The refractive index of a material depends on its physical properties, such as its density, chemical composition, and temperature. It also depends on the wavelength of the light passing through the material, as different wavelengths of light can be refracted to different degrees.
Here in the question,
When light passes through a medium with a different index of refraction, it changes its speed and direction, a phenomenon is known as refraction. The angle of refraction depends on the angle of incidence and the indices of refraction of the two media.
The relationship between the angles of incidence and refraction is given by Snell's law:
n₁sinθ₁ = n₂sinθ₂
Where
n₁ and n₂ = are the indices of refraction of the first and second media, respectively,
θ₁ = is the angle of incidence,
θ₂= is the angle of refraction.
In this case, the light is passing from a medium with an index of refraction of 1.0 to a medium with an index of refraction of 1.45. Since the second medium has a higher index of refraction than the first, the light will bend towards the normal when it enters the second medium.
Therefore, the correct answer is B i.e The beam will refract towards the normal in the new medium.
To learn more about Snell's law click:
https://brainly.com/question/10112549
#SPJ2
when finding the block by hanging it from a force meter. force is measured to be u.sn what mass is the mass of the object in grams
The mass of the object in grams can be determined by multiplying the force that was measured (u.sn) by the acceleration due to gravity (g). The acceleration due to gravity on Earth is 9.8 m/s².
Define acceleration due to gravity.The acceleration of an object in free fall within a vacuum is known as gravitational acceleration (and thus without experiencing drag). This is the constant acceleration brought on just by the gravitational pull. Gravimetry is the measurement and analysis of these rates. All bodies accelerate at the same rate in vacuum, independent of their masses or compositions.
The combined effects of gravity and the centrifugal force from Earth's rotation cause the Earth's gravity to be as great as it is at a given location on the surface.
What are the factors affecting acceleration due to gravity?The four elements listed below have the biggest impacts on g:
1) the Earth's form.
2) Earth's rotational motion.
3) height above the surface of the Earth.
4) length of time spent underground.
To know more about centrifugal force, visit:
https://brainly.com/question/17167298
#SPJ1
Assuming all objects are moving with the same velocity, which statement describes the object with the largest inertia?
A bowling ball rolls across a street and into a large soccer field.
A driver continues forward after his car takes a sharp turn.
A helicopter is following a high-speed pursuit across town.
A pebble is thrown in space and continues in a straight line.
All objects are moving with the same velocity, A bowling ball rolls across a street and into a large soccer field. Hence, the correct option is (a).
Inertia is the resistance of an object to changes in its motion, and it depends on the object's mass. The greater the mass of an object, the greater its inertia. In option (a), the bowling ball has the largest mass and therefore the greatest inertia among the objects described. The driver in option (b) experiences a force that changes the direction of his motion, so his inertia is not as great as the bowling ball's. In option (c), the helicopter is actively moving and changing its velocity, so its inertia is not as great as the bowling ball's. In option (d), the pebble has a much smaller mass than the other objects and therefore less inertia.
Therefore, option (a) - A bowling ball rolls across a street and into a large soccer field - describes the object with the largest inertia assuming all objects are moving with the same velocity.
To know more about velocity please refer: https://brainly.com/question/13334806
#SPJ1
Consider a tall building located on the Earth's equator. As the Earth rotates, a person on the top floor of the building moves faster than someone on the ground with respect to an inertial reference frame because the person on the ground is closer to the Earth's axis. Consequently, if an object is dropped from the top floor to the ground a distance h below, it lands east of the point vertically below where it was dropped.
(a)
How far to the east will the object land? Express your answer in terms of h, g, and the angular speed
The object will land a distance of ωR√(2h/g) east of the point vertically below where it was dropped.
What is rotation of earth?
The rotation of the Earth causes the object to have an eastward velocity component, which causes it to land to the east of the point vertically below where it was dropped.
To determine how far to the east the object will land, we need to consider the following:
The eastward velocity component of the object due to the Earth's rotation.The time it takes for the object to fall from the top of the building to the ground.The distance the object moves eastward during that time due to its eastward velocity component.Let's assume that the building is located exactly on the equator, so its distance from the Earth's axis is equal to the radius of the Earth, R. The angular speed of the Earth's rotation is given by the symbol omega, which is approximately equal to 7.27 x 10⁻⁵ radians per second.
First, let's find the eastward velocity component of the object due to the Earth's rotation. This can be calculated using the formula:
v = ω * R * cos(latitude)
where;
latitude is the latitude of the location (in this case, 0 degrees for the equator).Since cos(0) = 1, the formula simplifies to:
v = ωR
Next, let's find the time it takes for the object to fall from the top of the building to the ground. This can be calculated using the formula:
t = √(2h/g)
where;
h is the height of the building and g is the acceleration due to gravity, which is approximately 9.81 m/s²Finally, let's find the distance the object moves eastward during that time due to its eastward velocity component.
This can be calculated using the formula:
d = vt
Substituting the formulas for v and t, we get:
d = ωR√(2h/g)
Learn more about rotation of earth here: https://brainly.com/question/1808956
#SPJ1
A motor uses a movable pulley to lift a box weighing 100000N to a height of 10m, taking 10 seconds.
a. Calculate the pulling force that the engine has exerted.
b. Calculate the power of the motor.
c. Know the efficiency of the motor is 50%. How much work does it take to lift 100 boxes?
If a motor uses a movable pulley to lift a box weighing 100000N to a height of 10m, taking 10 seconds.
a. The pulling force that the engine has exerted is 50000N.
b. The power of the motor is 50000W or 50kW.
c. The work it take to lift 100 boxes is 200,000,000J.
How to find work exerted?a. The mechanical advantage of a movable pulley is 2, so the pulling force that the engine has exerted is:
Pulling force = weight of the box / mechanical advantage
Pulling force = 100000N / 2
Pulling force = 50000N
b. The power of the motor can be calculated using the formula:
Power = work / time
The work done by the motor is equal to the force applied multiplied by the distance traveled by the box:
Work = force x distance
Work = 50000N x 10m
Work = 500000J
Therefore, the power of the motor is:
Power = work / time
Power = 500000J / 10s
Power = 50000W or 50kW
c. The work done to lift one box is equal to the weight of the box multiplied by the height lifted:
Work per box = weight of the box x height
Work per box = 100000N x 10m
Work per box = 1,000,000J
To lift 100 boxes, the work required is:
Total work = work per box x number of boxes
Total work = 1,000,000J x 100
Total work = 100,000,000J
However, since the efficiency of the motor is 50%, only half of the input energy is converted to useful work. Therefore, the actual work required is:
Actual work = total work / efficiency
Actual work = 100,000,000J / 0.5
Actual work = 200,000,000
Therefore, the motor needs to perform 200,000,000J of work to lift 100 boxes, taking into account its 50% efficiency.
Learn more about workdone here:https://brainly.com/question/25573309
#SPJ1
Find the Equivalent Resistance for the circuit.
The equivalent resistance of the circuit is 5.65 k
What is equivalent resistance?Equivalent resistance of an electric circuit is the equivalent sum of all the resistances in the circuit whether in series or in parallel.
Now, in the circuilt above, we can see that we have two resistances 1.1 k and 4.55 k. We also note that the resistances are in series.
For resistors in series, to find their equivalent resistance, we add them together.
So, the equivalent reistance R = R' + R" where R' = 1.1k and R" = 4.55 k
So, substituting the values of the variables into the equation, we have that
R = R' + R"
= 1.1 k + 4.55 k
= 5.65 k
So, the equivalent resistance is 5.65 k
Learn more about equivalent resistance here:
brainly.com/question/29635283
#SPJ1
Help me on this question!
The other ball will go up to a height of 4.3 m after the collision.
What is the height risen by the ball after the collision?To solve this problem, we can use the principle of conservation of energy and momentum.
Let's first find the initial potential energy of the dropped ball:
E_i = mgh = 5 kg x 9.8 m/s² x 12 m = 588 J
When the ball hits the bar, the momentum is conserved:
m1v1 + m2v2 = (m1 + m2)vf
where;
m1 is the mass of the dropped ball (5 kg), v1 is its initial velocity (0), m2 is the mass of the bar (9 kg), v2 is the velocity of the bar after the collision, and vf is the final velocity of the system (the bar and the dropped ball) after the collision.We can simplify this equation by noting that the bar is initially at rest, so v2 = 0:
m1v1 + m2v2 = (m1 + m2)vf
5 kg x 0 m/s + 9 kg x 0 m/s = (5 kg + 9 kg + 5 kg)vf
vf = 0 m/s
This means that the system (the bar and the dropped ball) comes to a momentary stop just after the collision.
Now, let's find the final potential energy of the system:
E_f = (m1 + m2)gh
E_f = (5 kg + 9 kg) x 9.8 m/s² x h
E_f = 137.2 J x h
We can equate the initial and final energies:
E_i = E_f
588 J = 137.2 J x h
h = 4.3 m
Learn more about potential energy here: https://brainly.com/question/29490129
#SPJ1
During the photoelectric effect experiment, a photon is emitted with 9.60 x10-20 J of kinetic energy. If the work function of the photosensitive surface is 1.68 eV, which is the frequency of the incident light? (h = 6.626 x 10-34 J·s; 1 eV = 1.60 x 10-19 J)
According to the given statement 5.50 * 10¹⁴Hz is the frequency of the incident light.
What does the term "photoelectric effect" mean?The photoelectric effect, which happens when light strikes a metal, can release electrons out of its surface. As the electrons that are expelled first from metal are known as emitted electrons, this process is also sometimes referred to as photoemission.
The following equation may be used to determine a photon's energy in terms of frequency:
E = hf
The work function must first be changed from electron volts (eV) to joules (J):
1 eV = 1.602 × 10⁻¹⁹ J
Hence, the work function is:
1.68 eV × 1.602 × 10⁻¹⁹ J/eV = 2.69 × 10⁻¹⁹ J
The emitted photon's kinetic energy is:
E = 9.60 × 10⁻²⁰ J
E = E0 + KE
where KE is the kinetic energy of the released electron and E0 is the work function.
Inputting the values, we obtain:
hf = E0 + KE
hf = 2.69 × 10⁻¹⁹ J + 9.60 × 10⁻²⁰J
hf = 3.65 × 10⁻¹⁹ J
When we solve for f, we obtain:
f = E/h = (3.65 × 10⁻¹⁹ J) / (6.626 × 10⁻³⁴ J s)
f = 5.50 × 10¹⁴ Hz
As a result, the incident light has a frequency of 5.50 * 10¹⁴Hz.
To know more about photoelectric effect visit:
https://brainly.com/question/9260704
#SPJ1
On a distance vs. time graph, the slope of the line equals the object’s? 9._____
Answer: speed
Explanation: On a distance vs. time graph, the slop of the line equals how fast an object is going.
Consider the heaviest box of 68 kg
that you can push at constant speed across a level floor, where the coefficient of kinetic friction is 0.30, and estimate the maximum horizontal force that you can apply to the box. A box sits on a ramp that is inclined at an angle of 60.0 ∘
above the horizontal. The coefficient of kinetic friction between the box and the ramp is 0.30. If you apply the same magnitude force, now parallel to the ramp, that you applied to the box on the floor, what is the heaviest box that you can push up the ramp at constant speed? (In both cases assume you can give enough extra push to get the box started moving.)
The heaviest box that you can push up the ramp at constant speed is 114kg where the coefficient of kinetic friction is 0.30.
Given the mass of heaviest box (m) = 68kg
The coefficient of kinetic friction of floor is (k1) = 0.30
The angle of inclination of ramp (θ) = 60°
The coefficient of kinetic friction between the box and ramp is(k2) = 0.30
The speed to push box on floor is constant = F
In the first case, the maximum horizontal force that can be applied to the box is equal to the coefficient of kinetic friction multiplied by the weight of the box.
F1 = k1 * m = 68 * 0.30 = 20.4 N.
In the second case, the maximum force that can be applied to the box is equal to the coefficient of kinetic friction multiplied by the normal force that the ramp exerts on the box.
The maximum force on ramp is (F2) = 0.30 x 68 x cos 60.0 = 34.2 N.
Thus it means that you can push a heavier box up the ramp at constant speed than you can across the level floor.
The maximum weight of the box that can be pushed up the ramp at constant speed is (M) = F2/k2 = 34.2 N / 0.30 = 114 kg.
To learn more about friction click here https://brainly.com/question/13000653
#SPJ1
find distance of this v-t graph
The distance of the v-t graph as shown in the diagram is 1000 m.
How to find the distance in a v-t graph?
To calculate the distance in a velocity-time graph, we find the total area under the graph
From the graph in the question above,
Distance in the v-t graph = Area of a tripezium = h(a+b)/2A = h(a+b)/2........................ Equation 1Where:
A = Total distance of the v-t graphh = Height of the tripeziuma and b = Both parallel side of the tripeziumFrom the diagram,
h = 50 secondsa = 10 m/sb = 30 m/sSubstitute these values into equation 1
A = 50(10+30)/2A = 50×20A = 1000 mHence, the distance is 1000 m.
Learn more about distance of a v-t graph here: https://brainly.com/question/30345475
#SPJ1
Question 1
A stone of 8 kg mass falls from the top
of an 80 m-high building. Find the
kinetic energy of the stone when it
reaches the ground.
Points 2
R
Re
be
ce
as
To determine the stone's kinetic energy when it touches the ground, we can use the law of conservation of energy. The stone is initially at rest 80 metres above the ground, and its potential energy is provided by: PEi = mg
What energy does a body of mass 5 kg possess when it is put 10 metres above the ground?(ii) For free fall, the body's overall energy supply remains constant at any given moment. It is the same as adding P.E. and K.E.
What is the energy that an item with a mass of 10 kg has at a height of 6 metres?The energy held by the 10 kg item at 6 inches in height. m above ground is 588 J.
To know more about kinetic energy visit:-
brainly.com/question/26472013
#SPJ1
How many nodes are on this standing wave? *
The number of nodes present in this standing wave is 6
How many nodes are on this standing wave?A standing wave is a type of wave that remains in a constant position and does not propagate through a medium. Instead, it oscillates in place between two fixed points, creating a pattern of constructive and destructive interference.
In a standing wave, nodes are the points along the medium that remain stationary, with no displacement or movement of the medium. These nodes occur at locations where the displacement of the medium is always zero, meaning that the amplitude of the wave is zero at those points.
In other words, nodes are the points of minimum energy in the standing wave. They are the points where the crest of the wave meets the trough of the wave, resulting in the cancellation of the wave's amplitude. The distance between two adjacent nodes is half of the wavelength of the standing wave.
In this standing wave, the number of nodes present is 6
Learn more on standing wave here;
https://brainly.com/question/2292466
#SPJ1
An incompressible fluid of uniform density flows through an infinitely long pipe. See picture below. In the section shown, the pipe narrows from a diameter of 4 cm to a diameter of x cm, and the fluid is flowing through the narrow region at a speed of 3 m/s. What is the flow speed of the fluid in the wide region of the pipe? a. 16x^2/3 m/s b. 12x^2 m/s c. 3x^2/4 m/s d. 4x^2/3 m/s
e. 3x^2/16 m/s
The flow speed of the fluid in the wider section of the pipe is x^2/3 m/s. The correct option is d.
Since the pipe is infinitely long, the mass flow rate of the fluid is constant throughout the pipe. Therefore, the product of the density, cross-sectional area, and flow speed is also constant throughout the pipe.
Let's assume that the density of the fluid is ρ and the diameter of the narrower section is x cm. Then, the cross-sectional area of the narrower section is πx^2/4. From the given information, the flow speed in the narrower section is 3 m/s.
Using the equation of continuity,
A1V1 = A2V2
π(4/2)^2V1 = πx^2/4 * 3
V1 = (3/16) * (16x^2/3) = x^2/3
Therefore, the flow speed of the fluid in the wider section of the pipe is x^2/3 m/s. Hence, the correct option is (D).
To know more about fluid, here
brainly.com/question/29434146
#SPJ4
Which meteoroid is most likely to reach the Earth’s surface? Explain why this is so, in terms of heat transfer. Use data from the table to support your response.
The meteoroid that is most likely to reach the Earth's surface is the one with the highest mass-to-surface area ratio which is number 2. This is because as a meteoroid enters the Earth's atmosphere, it encounters a great deal of resistance, which generates heat due to friction.
Meteoroids and Heat TransferMeteoroids are small rocky or metallic objects that are present in the solar system. They range in size from tiny particles to large boulders, and they can originate from comets, asteroids, or other celestial bodies. When a meteoroid enters the Earth's atmosphere, it becomes a meteor or a shooting star, and if it survives the descent and reaches the Earth's surface, it is then called a meteorite.
The meteoroid that is most likely to reach the Earth's surface is the one with the highest mass-to-surface area ratio. This is because as a meteoroid enters the Earth's atmosphere, it encounters a great deal of resistance, which generates heat due to friction. This heat is transferred to the meteoroid through conduction, and it can cause the meteoroid to vaporize or break apart. However, a larger meteoroid has more mass to dissipate this heat over, so it is less likely to be completely destroyed.
Additionally, a larger meteoroid has a smaller surface area to mass ratio, which means that there is less surface area to be heated and potentially destroyed by the heat generated during entry into the Earth's atmosphere. Therefore, a larger meteoroid with a higher mass-to-surface area ratio is more likely to survive and reach the Earth's surface.
Learn more on meteoroids here https://brainly.com/question/30710590
#SPJ1
Meteoroid 2, with an initial mass of 3.24 kg, is most likely to reach the Earth's surface.
Why is Meteoroid 2 the most likely meteoroid?This is because the surface temperature of the meteoroid in space before entering the atmosphere is relatively high at 92°C, which means it has a greater amount of heat energy than the other meteoroids. When meteoroids enter the Earth's atmosphere, they encounter resistance from the air, which causes them to slow down and heat up due to friction.
The surface temperature of Meteoroid 2 at 150 km above the Earth's surface is 1727°C, which is higher than the other meteoroids. This suggests that Meteoroid 2 has a greater ability to resist the heat transfer from the high temperatures it reaches during entry into the Earth's atmosphere.
According to the table, the initial mass of Meteoroid 2 is the largest, and it also has the highest surface temperature in space. These factors contribute to the meteoroid's ability to resist heat transfer and increase the likelihood of it reaching the Earth's surface.
Find out more on meteoroid here: https://brainly.com/question/30123423
#SPJ1
Define the term schema as used by piaget
Answer:A schema, or scheme, is an abstract concept proposed by J. Piaget to refer to our, well, abstract concepts.
Explanation: