A student has a 5. 00 gram sample of calcium chloride (CaCl2) solid. How many miles of calcium chloride are contained in this sample

The volume of the copper is equal to  4cm³.

The density of the substance can be described as the substance's mass per unit of its volume. The symbol commonly used to express density is ρ and the D letter can also be used.

The mathematical formula of the density can be expressed as written below:

Density = Mass/Volume or ρ = m/V

The density of a material varies with temperature and pressure. There is a small variation for solids as well as liquids but much larger for gases. Increasing the pressure of material decreases the volume of material and thus increases its density.

Given the mass of the copper = 35.2 g

The density of the copper at  20°C, d = 8.80 g/cm³

The volume of the copper, V = mass/density = 35.2/8.80 = 4 cm³

Learn more about density, here:

brainly.com/question/15164682

#SPJ1

The pressure acting here is 3.32 atm. Then the volume of copper can be determined using ideal gas law. The volume is 3.9 L.

Ideal gas equation is a combination of   Boyle's law, Charle's law and Avogadro's law. The expression relating pressure, volume,   temperature and number of moles of a gas is written as:

PV = nRT.

It can be rearranged as PM = dRT.

where d is the density and M be the mass.

Atomic mass of copper = 63.5 g/mol

density = 8.80 g/cm³

T = 20° C or 293 K.

Then pressure p =  dRT/M

p = 8.80 g/cm³ × 0.082× 293 /63.5 = 3.32 atm

Now the weight of copper = 35.2 g

number of moles of Cu = 35.2/63.5 = 0.5 g.

Then, v = nRT/P

v = 0.5 × 0.082 × 293 /3.32 = 3.9 cm³.

Therefore, the volume of copper is 3.9 L.

Find more on ideal gas equation:

https://brainly.com/question/17254541

#SPJ1

Answer:

This is what I put, it hasn't been graded though...

Within the system, the energy is flowing from your hand to the ice cream cone. Energy is also flowing from the surroundings to the ice cream cone unless it's reeeeaally cold in the surroundings in which case why are you even holding an ice cream cone when it's that cold?

Answer:

Pb(s)------>Pb2+(aq)

Explanation:

If you look at the oxidation numbers Pb increases from 0 to +2 while Cu decreases from +2 to 0.Hence,Pb is the reducing agent and Cu2+ is the oxidizing agent.

Also, a thing to note is that the oxidation number of  any solid is always 0.

~Hope this helps:)

Yes, carbohydrates are used for energy storage to build structures, and as signal molecules to help cells communicate with each other.

Carbohydrates are molecules that consist of carbon, hydrogen, and oxygen atoms and can be broken down by the body to provide energy. They are used to build the structural components of cells, such as the cell walls and membranes, and are also used as signal molecules between cells. As signal molecules, they can help cells communicate with each other and respond to changes in the environment.

Learn more about Carbohydrates: https://brainly.com/question/797978

#SPJ4

Answer:

The energy should be high.

Explanation:

Bonds do store energy and release it depending if it's endothermic or exothermic. The energy should be low because when a bond forms (endothermic) it releases heat, which helps form bonds. Having a high energy means the bond is absorbing energy, which helps break bonds (endothermic). How this helps!

According to the question,16.2 kPa is equal to 0.16 atmospheres.

What is the atmospheres?

The atmosphere is the thin layer of gases and particles that surrounds Earth, protecting us from the sun’s harmful radiation and maintaining the planet’s temperature. It is composed of 78% nitrogen, 21% oxygen, 0.9% argon, 0.03% carbon dioxide, and trace amounts of other gases, as well as water vapour, dust, and other particles. The atmosphere works by trapping heat from the sun, allowing temperatures to remain relatively stable throughout the world. It also helps regulate the water cycle, ensuring that water remains available for life on Earth. The atmosphere also helps protect us from environmental hazards like ozone depletion and acid rain. In addition, it is home to many species of birds, insects, and other animals. Without the atmosphere, Earth would be a barren, lifeless planet.

To learn more about atmospheres visit:

https://brainly.com/question/28310375

#SPJ1

According to the data collected during the experimental reaction in the laboratory, and the balanced equation of the reaction, 5 moles of iron (Fe) and 2.5 moles of aluminum oxide (Fe2O3) were produced.

Fe2O3 + 2Al → 2Fe + Al2O3

If 1 mole of Fe2O3 is combined with 2 moles of Al

So 3 moles of Fe2O3 combine with x moles of Al

X moles of Al = 3 moles Fe2O3 x 2 moles Al / 1 mole Fe2O3 = 6 moles

Limiting reagent: Al, because there are only 5 moles available

If 2 moles of Al produce 2 moles of Fe

So 5 moles of Al produce x moles of Fe

X moles of Fe = 5 moles of Al x 2 moles of Fe / 2 moles of Al = 5 moles

If 2 moles of Al produce 1 mole of Fe2O3

So 5 moles of Al produce x moles of Fe2O3

X moles of Fe = 5 moles of Al x 1 mole of Fe2O3 / 2 moles of Al = 2.5 moles

By establishing the balanced equation of the reaction and the stoichiometric relationships, the amount of limit reagent is first determined and with this data, the moles of products are later determined.

Learn more about data was collected when a reaction was performed experimentally in the laboratory at https://brainly.com/question/29100434

#SPJ4

The amount of energy used to heat the water from 0°C to 70°C is 8,786.4J.

The amount of energy used in heating a substance can be calculated using the following formula:

Q = mc∆T

Where;

According to this question, a student heated 30 milliliters of water from 0 degrees celsius to 70 degrees celsius.

Since 1mL of pure water equals 1 gram, then 30mL of water will equal 30grams of water.

Q = 30 × 4.184 × (70 - 0)

Q = 8,786.4J

Therefore, 8,786.4J is the energy used to heat the water sample.

Learn more about energy at: https://brainly.com/question/8168263

#SPJ1

4-methyl-2-pentene s the expected major organic product from treatment of 4-methyl-2-pentyne with sodium metal in liquid ammonia.

The process includes hydrogenation of an alkyne to an alkene in liquid ammonia using sodium metal. This is a particular reaction that leads in the creation of trans alkene.  Alkynes are hydrocarbons with triple carbon-carbon bonds. For molecules with a single triple bond, their typical formula is CnH2n-2 (and no rings).

A number of the same reactions occur in alkynes as in alkenes, but they can react twice due to the existence of two p-bonds inside the triple bond. When sodium dissolves into liquid ammonia (boiling point -33 °C), it turns a vivid blue. When there are alkynes present, they have reduced to a trans (i.e. E) alkene.

To know more about the Ammonia, here

https://brainly.com/question/28393162

#SPJ4

Answer:

OH^-

Explanation:

Any substance that is able to neutralize acidity in the stomach is generally known as an antacid. There are various kinds of antacids that are in common use. It should be noted that the stomach is usually slightly acidic.

Milk of magnesia is the substance magnesium hydroxide with chemical formula Mg(OH)2. A solution of milk of magnesia contains Mg^2+ and OH^-.

Hence the negative ion contained in milk of magnesia is the hydroxide ion  OH^-.

nitric acid (HNO3) is classified as a strong acid in water, which means that it dissociates completely in water to produce hydrogen ions (H+) and nitrate ions (NO3-).

This is in contrast to weak acids, which only partially dissociate in water. Strong acids have a very low pH (typically less than 1) and are highly corrosive, making them useful for many industrial applications such as making fertilizers, explosives, and dyes. However, they can also be dangerous and must be handled with care. A strong acid is an acid that fully dissociates or ionizes in water, meaning it releases all of its hydrogen ions (H+) into solution. This makes the acid highly acidic and gives it a low pH (typically less than 1). Some examples of strong acids include hydrochloric acid (HCl), sulfuric acid (H2SO4), nitric acid (HNO3), and perchloric acid (HClO4). Strong acids are highly reactive and can cause chemical burns and other damage if not handled properly. \

Learn more about strong acid here:

https://brainly.com/question/12811944

#SPJ4

Answer:

1935J

Explanation:

Answer:

[tex]\boxed {\boxed {\sf C. \ 1935 \ J}}[/tex]

Explanation:

The equation for this problem is:

[tex]q=mc\Delta T[/tex]

where m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.

The mass is 3 kilograms, but the specific heat capacity includes grams in the units. Convert kilograms to grams. There are 1000 grams in 1 kilogram.

The specific heat capacity for lead is found on the table. It is 0.129 J/g°C.

Let's find the change in temperature. It is raised from 15 °C to 20 °C.

Now we know every value.

Substitute the values into the formula.

[tex]q= (3000 \ g)( 0.129 \ J/g \textdegree C)(5 \textdegree C)[/tex]

Multiply the first 2 numbers together. The units of grams cancel.

[tex]q= (387 \ J/ \textdegree C )(5 \textdegree C)[/tex]

Multiply again. This time the units of degrees Celsius cancel.

[tex]q= 1935 \ J[/tex]

1935 Joules of energy are required and choice C is correct.

Give a succinct description of how the various alkene reactants were combined to create the same result. The most stable intermediate carbocation will arise as a result of an electrophilic proton addition in the reaction between HCl and both alkenes.

The observed product is produced in both cases by adding Cl- to the tertiary carbocation that is produced. By figuring out the physical properties of the reactants and products, negative entropy in chemical processes may also be calculated. Gas molecules are widely spaced apart and move randomly in all directions, which results in high entropy in gases. Being a liquid converting into a solid, water freezing into ice is an entropy-reducing process. Due to the molecules' reduced freedom of movement, a solid has less chaos. A negative entropy reaction occurs when hydrogen and oxygen combine to generate water.

To learn more about carbocation please click on below link

https://brainly.com/question/13164680

#SPJ4

The quantity of matter in a body,object,or substance is B. Mass.

A body's mass is an inherent quality. Prior to the discovery of the atom and particle physics, it was widely believed to be related to the amount of matter in a physical body.

It is the most fundamental characteristic of matter and one of the fundamental quantities in physics. Mass is a term used to describe how much matter is present in a body. The kilogram is the SI unit of mass (kg). A body's mass does not alter at any point in time.

Learn more about mass on:

https://brainly.com/question/837939

#SPJ1

Answer:

I believe the answer would be C4H9O2.

"A boy sits in a chair and the floor pushes the boy" is not an action-reaction pair according to Newton's third law of motion.

According to Newton's third law of motion, every action which occurs in nature has an equal as well as opposite reaction. If a particular object Z happens to exert a force on another object Y then the object Y will also exert an equal as well as opposite force on object Z.
For example, when an oar pushes the water, the water also pushes the oar; when a dog wags its tail, the tail also wags the dog and when a missile pushes gas out, the gas also pushes the missile forward. All these instances involve an action-reaction pair.

Hence, option d. "a boy sits in a chair, and the floor pushes the boy" is the correct option.

To know more about Newton's third law of motion here

https://brainly.com/question/29768600

#SPJ4

Answer:

Explanation:

Mass the fluid, find its volume, and divide mass by volume. To mass the fluid, weigh it in a container, pour it out, weigh the empty container, and subtract the mass of the empty container from the full container. To find the volume of the fluid, you simply measure it very carefully in a graduated cylinder.

Answer:

3KClO4 + KCl ➡️ 4KClO3

2AlI3 + 3HgCl2 ➡️ 2AlCl3 + 3HgI2

Answer: D!! ( difference in the potential energy of the reactants and products )

Explanation:

i have the same test

Answer:

From Newtonian Mechanics

Vf=Vo + at

Vf=Final velocity

Vo= Initial Velocity

a= acceleration

t=time taken

Making "a" the subject

a=Vf - Vo/(t)

a = 10,000–5,000/(60)

a=5,000/60

a=83.33ms-²

Answer: A. It doubles

Explanation:

Answer:

B.  Mg3N2

Explanation:

There are 20.0 grams total material (14.4g Mg and 5.6 g N).  We can convert grams into moles of each element by dividing by that element's molar mass (g/mole) to yield the number of moles of each element.  To find the empirical formula, we need to convert the moles of each to a whole number by using a fracor that provides a whole number for each element.  5 works well, and we get 0.6x5 = 3 Mg atoms and 0.4x5 = 2 N atoms.

Mass % g/mole grams moles       Factor of 5

Mg 72.00% 24.305 14.4         0.6             2.962 or 3

N 28.00% 14.007 5.6         0.4             1.999  or 2  

100.0%          20          1.0      

There are 3 Mg and 2 N atoms per molecule.  The empirical formula is Mg3N2.

In a car engine, energy in the fuel's chemical energy stores is transferred to useful kinetic energy stores.

Explanation:

Chemical energy is the form of energy held within the fuel. A car's engine operates by burning fuel. The fuel is burned, creating mechanical energy that moves the vehicle. The engine thus transforms chemical energy into mechanical energy.

By applying pressure to the pistons and exerting work on them, the internal combustion engine of a car transforms the potential chemical energy in gasoline and oxygen into thermal energy, which is then translated into mechanical energy that drives the vehicle (raising its kinetic energy).

To learn more about fuel's chemical energy visit;

https://brainly.com/question/11867037

#SPJ4

Explanation:

The lunar phase or Moon phase is the shape of the Moon's directly sunlit portion as viewed from Earth. The lunar phases gradually change over a synodic month as the Moon's orbital positions around Earth and Earth around the Sun shift.

Irony is a mismatch between what is expected and what actually occurs. These literary methods aid in the creation of dramatic effects in writing.

Irony is a disconnect between what is expected to happen and what actually happens. These types of literary devices help in creating a dramatic effect in literature.

Irony is a literary device which was used extensively in Greek tragedy. It involves expressing the meaning of something by making use of words which technically mean the opposite of the original thing being conveyed.

Irony is used for a dramatic or humorous effect.  There are three types of irony seen in literature as follows:

• Verbal Irony  

• Situational Irony  

• Dramatic Irony  

Verbal irony involves the usage of different words to mean something dissimilar to what they look like they actually mean.  

Situational Irony means that what happens is totally different from what was expected to be happening.

Dramatic Irony occurs in plays, etc. where the audience or the readers are more aware of what is actually going on as compared to the character in the scene.

Learn more about irony here:

https://brainly.com/question/13428382

#SPJ4

1.High energy demands: Down's cells require a large amount of energy to function effectively. The process of creating and maintaining the cells requires significant energy inputs to power equipment, lighting, heating, and cooling systems.

2.Manufacturing processes: Many of the processes involved in creating and maintaining Down's cells are energy-intensive. This includes cell replication, gene manipulation, and tissue culture.

3.Complex equipment: The equipment required for Down's cell research and production is often complex and requires significant energy inputs to operate. This includes centrifuges, microscopes, and other specialized equipment used in the lab.

4.Climate control: Down's cells must be kept at specific temperatures and humidity levels to maintain their integrity. This requires the use of energy-intensive climate control systems to maintain optimal conditions.

5.Data storage and processing: With the growing amount of data generated by Down's cell research, large quantities of electricity are also needed to store and process the data.

6.Extensive research and development: Down's cells are a relatively new area of research, which means that large amounts of electricity are used to power experimentation and the testing of new techniques and methods.

To learn more about electricity:-

https://brainly.com/question/776932

Answer:

Water is a compound because it is made up of water molecules. There is no such thing as water atoms. Water molecules are made of hydrogen and oxygen atoms, in the definite proportion of two hydrogens for one oxygen.

Explanation:

The difference between a molecule and a compound is this:

A molecule consists of two or more atoms joined by a chemical bond.

A compound consists of two or more different atoms joined by chemical bonds.

Water (H2O) is both a molecule and a compound.

Hydrogen gas (H2) and oxygen gas (O2) are molecules but because the atoms of which they are made are not different, they do not qualify as compounds.

Answer:

A. 28 years

Explanation:

Applying,

R = R'(2ᵃ/ⁿ).............. Equation 1

Where R = Original sample, R' = Sample left after decay, a = Total time taken to decay, n = half life.

From the question,

Given: R = 12 g, R' = 6 g, a = 28 years.

Substitute into equation 1 and solve for n

12 = 6(2²⁸/ⁿ)

12/6 = 2²⁸/ⁿ

2²⁸/ⁿ = 2

Equation the base,

28/n = 1

n = 28 years.

Hence the half-life is 28 years