The sidelength of the square column is 550 mm (rounded up to the nearest 50mm), the final number of 28 mm diameter bars is 9, and the necessary spacing along the height of the column is 15 mm (rounded down to the nearest 5mm).
Given data:
Deadload = 5000 kN
Liveload = 7000 kN
f'c = 42 MPa or 42000 kPa (compressive strength of concrete)
fy = 415 MPa or 415000 kPa (yield strength of steel)
cc = 50 mm (clear cover)
Diameter of bar = 28 mm
Percentage of longitudinal steel = 2%
Let's find out the value of Sidelength of square column:
The area of cross-section of the square column will be:
Area = (Deadload + Liveload) / (f'c x 1000)
Area of steel required = 2% of area of cross-section of the square column
Area of steel required = (2/100) * Area
Let's calculate the value of diameter of steel bars:
Diameter of steel bars = 28 mm
Percentage of steel = 2%
Cross-sectional area of one 28 mm diameter bar = π/4 * d^2 = π/4 * 28^2 = 616 mm^2
The total cross-sectional area of steel required:
Total Area = (2/100) * Area
Number of bars required = Total Area / Cross-sectional area of one 28 mm diameter bar
Let's find out the value of necessary spacing along the height of the column:
Spacing for ties = 16/25 * diameter of longitudinal bars
Spacing for ties = 18 mm
Number of ties = (2 x Height of column) / Spacing for ties
Given Deadload = 5000 kN and Liveload = 7000 kN
Total load = Deadload + Liveload = 5000 + 7000 = 12000 kN
The area of cross-section of the square column will be:
Area = Total load / (f'c x 1000)
Let the side of the square column be 'x':
The area of the square column = x^2
x^2 = Area
Square root on both sides:
x = √(Area)
To convert in mm, multiply by 1000:
x = 535 mm
To find the number of bars:
Diameter of one bar = 28 mm
Percentage of steel = 2%
Cross-sectional area of one 28 mm diameter bar = π/4 x d^2 = π/4 x 28^2 = 616 mm^2
Cross-sectional area of all bars = Total Area of steel
Percentage of steel = 2%
Total cross-sectional area of steel = (2/100) x Area
Number of bars = Total cross-sectional area of steel / Cross-sectional area of one 28 mm diameter bar
Using 10 mm diameter lateral ties:
Spacing for ties = 16/25 x diameter of longitudinal bars
Spacing for ties = 18 mm
Number of ties = (2 x Height of column) / Spacing for ties
Therefore, the necessary spacing along the height of the column is 18 mm.
Learn more about sidelength of the square:
https://brainly.com/question/17289871
#SPJ11
identity the domain of the function shown in the graph
Answer: A. x is all real numbers
Step-by-step explanation:
The domain is the allowable x values. When looking at the function below, notice how the function passes through all x values. This means all real number x values are in the domain.
Write a report on "Environmental protection policies of China" not less than 3000 words with facts.
Note: Don't Upload Screenshots please. upload a word file or PPT that i can use it.
Environmental protection policies of China include measures to address air pollution, water pollution, and deforestation. These policies aim to reduce emissions, promote sustainable development, and protect the country's natural resources.
In order to tackle air pollution, China has implemented various initiatives such as the Air Pollution Prevention and Control Action Plan. This plan includes measures to reduce coal consumption, promote clean energy sources, and improve industrial emissions standards. Additionally, the government has implemented strict vehicle emission standards and encouraged the use of electric vehicles.
To address water pollution, China has implemented the Water Pollution Prevention and Control Action Plan. This plan focuses on reducing industrial and agricultural pollution, improving wastewater treatment, and protecting water sources. The government has also introduced stricter regulations for water pollution and increased penalties for violators.
In terms of deforestation, China has implemented the Natural Forest Protection Program and the Grain for Green Program. These programs aim to protect natural forests, restore degraded land, and promote afforestation. The government has also introduced regulations to control logging and illegal timber trade.
Overall, China has made significant efforts to improve environmental protection through its policies. However, challenges still remain, and continuous efforts are needed to ensure sustainable development and preserve the country's natural resources.
Know more about air pollution here:
https://brainly.com/question/32829684
#SPJ11
Answer the following questions in regards to the following molecule: a) How many sigma bonding molecular orbitals are there in the MO of this molecule ? (total number of sigma bonding Mo) b) How many sigma bonding sp-sp molecular orbitals are there in the MO of this molecule ? c) How many artibonding MO are there in MO of this molecule ? (total number of antibonding Mo, sigma and pl) d) Nome the HOMO (Highest Occupied Molecular Ortital) of this molecule ?
1) There are six sigma bonding molecular orbitals
2) There is one sigma bonding sp-sp molecular orbital.
3) There are twelve antibonding molecular orbitals
4) The highest occupied molecular orbital is π*
What is a molecular orbital?A molecular orbital is an area of space where there is a high chance of encountering electrons. Atomic orbitals from the many constituent atoms of the molecule overlap to form it. In other words, rather than concentrating on specific atoms, molecular orbitals explain the distribution of electrons in a molecule as a whole.
When two atomic orbitals join, the same number of molecular orbitals is created. According to the Aufbau principle and Pauli exclusion principle, these molecular orbitals can be filled with electrons in a manner similar to how electrons fill atomic orbitals.
Learn more about molecular orbital:https://brainly.com/question/29642622
#SPJ4
The specific discharge of an aquifer is 0.0006 cm/sec. The porosity of the formation is 0.4. What is the average velocity of an unretarded dissolved contaminant in this aquifer in units of meters per year? Enter your answer rounded to the nearest whole number, no commas or decimals
The average velocity of an unretarded dissolved contaminant in an aquifer is 8 meters per year. Specific discharge can be defined as the volume of water that moves through a unit cross-sectional area of an aquifer perpendicular to flow per unit of time.
It is usually represented by the symbol q and has units of length per time (LT−1) such as m2/day, cm/s, or ft/day.
Porosity can be defined as the ratio of the volume of voids to the volume of the total rock.
The volume of voids includes the volume of pores and fractures.
The formula for average velocity of a dissolved contaminant in an aquifer is given by
v = q/n
Where, v is average velocity, q is specific discharge, and n is porosity
Substituting the given values, we have
v = 0.0006 cm/s / 0.4v
= 0.0015 cm/s
Converting the units from cm/s to meters per year,
v
= 0.0015 x (365 x 24 x 3600) meters/year
v = 8 meters per year
Therefore, the average velocity of an unretarded dissolved contaminant in this aquifer in units of meters per year is 8 meters per year.
To know more about area visit :
https://brainly.com/question/30579390
#SPJ11
Penny conducts a study to see if the daily temperature affects the number of people at the neighborhood swimming pool. What type of association would you expect this study to represent?
Question 4 options:
Positive Association
No Association
Negative Association
Based on the given scenario, where Penny is studying the relationship between the daily temperature and the number of people at the neighborhood swimming pool, we would expect this study to represent a positive association.
Positive Association is correct.
A positive association implies that as the daily temperature increases, the number of people at the swimming pool is also expected to increase.
This is because higher temperatures typically make swimming more appealing and enjoyable, leading to a greater likelihood of people visiting the pool.
When the weather is warmer, individuals may be more inclined to engage in outdoor activities, seek relief from the heat, and take advantage of recreational opportunities such as swimming. Consequently, an increase in temperature tends to be associated with a higher demand for pool usage, resulting in a positive relationship between the daily temperature and the number of people at the swimming pool.
It is important to note that correlation does not necessarily imply causation.
While a positive association is expected between the temperature and the number of people at the pool, it does not establish a direct cause-and-effect relationship.
Other factors such as holidays, school breaks, or promotional events could also influence pool attendance.
Nonetheless, in the context of this study, we anticipate observing a positive association between the daily temperature and the number of people at the neighborhood swimming pool.
For similar question on positive association.
https://brainly.com/question/23489661
#SPJ8
by the COVID 19 pandemic. Most construction companies had to reduce their operations until the necessary guidelines were determined to ensure the well-being of the workers thus affecting different aspects in the construction sites. Q3. Discuss four major COVID-related health and safety measures introduced in construction sites.
The COVID-19 pandemic has led to the implementation of various health and safety measures in construction sites. Social distancing, the use of personal protective equipment, enhanced hygiene practices, and regular sanitization and cleaning are among the major measures introduced.
These measures aim to protect the health and well-being of construction workers and minimize the spread of the virus within construction sites. By implementing these measures, construction companies can create a safer work environment and mitigate the impact of the pandemic on construction operations.
Four major COVID-related health and safety measures introduced in construction sites are:
1. Social distancing: Construction sites have implemented measures to maintain social distancing among workers. This includes reducing the number of workers on-site, staggering work schedules, and creating physical barriers or marked zones to ensure workers maintain a safe distance from each other.
2. Personal protective equipment (PPE): The use of personal protective equipment has been emphasized to minimize the spread of COVID-19. Construction workers are required to wear appropriate PPE, such as face masks, gloves, and safety goggles, depending on the tasks they perform.
3. Enhanced hygiene practices: Construction sites have implemented rigorous hygiene practices to prevent the spread of the virus. This includes providing handwashing stations or hand sanitizers at multiple locations on-site, promoting frequent handwashing, and encouraging respiratory etiquette, such as coughing or sneezing into elbows.
4. Regular sanitization and cleaning: Construction sites have increased the frequency of cleaning and disinfection activities. High-touch surfaces, shared tools, and equipment are regularly sanitized to minimize the potential transmission of the virus. Common areas, such as breakrooms and portable toilets, are also cleaned and disinfected regularly.
1. Social distancing: Social distancing measures have been introduced to minimize close contact and reduce the risk of virus transmission among construction workers. By reducing the number of workers on-site and implementing physical distancing protocols, the likelihood of COVID-19 spread can be minimized.
2. Personal protective equipment (PPE): PPE is essential to protect workers from exposure to the virus. Construction workers are required to wear appropriate PPE, such as masks, gloves, and goggles, depending on their tasks and the level of risk involved. PPE helps to prevent the inhalation or contact transmission of the virus.
3. Enhanced hygiene practices: Promoting good hygiene practices is crucial in preventing the spread of COVID-19 on construction sites. Handwashing stations or hand sanitizers are made readily available, and workers are encouraged to wash their hands frequently with soap and water for at least 20 seconds. Respiratory etiquette, such as covering coughs and sneezes, is also emphasized.
4. Regular sanitization and cleaning: Construction sites have increased the frequency of cleaning and disinfection activities. High-touch surfaces, shared tools, and equipment are regularly sanitized to reduce the risk of virus transmission. Common areas, such as breakrooms and portable toilets, are cleaned and disinfected regularly to maintain a hygienic environment.
Learn more about COVID-19 pandemic visit:
https://brainly.com/question/29643338
#SPJ11
For the sag curve shown, the following is known:
PVI elevation = 5280 feet
PVI at station 70+00
Length = 10 stations
g1 = -0.06
g2 = 0.03
What is the horizontal distance from the PVC to the low
poin
Therefore, the horizontal distance from the PVC to the low point is 1000 feet.
The horizontal distance from the PVC to the low point can be found using the following steps:
Step 1: Calculate the elevation of the PVC using the given PVI elevation and g1.
Elevation of PVC = PVI elevation + g1 * Length of curve to PVC
= 5280 + (-0.06) * (10 * 100)
= 5220 feet
Step 2: Calculate the elevation of the PVT using the given PVI elevation, g2, and the length of the entire curve.
Elevation of PVT = PVI elevation + g2 * Length of entire curve
= 5280 + (0.03) * (10 * 100)
= 5340 feet
Step 3: Calculate the elevation of the low point by averaging the elevations of the PVC and PVT.
Elevation of low point = (Elevation of PVC + Elevation of PVT) / 2
= (5220 + 5340) / 2
= 5280 feet
Step 4: Calculate the vertical distance from the PVC to the low point.
Vertical distance from PVC to low point = Elevation of low point - Elevation of PVC
= 5280 - 5220
= 60 feet
Step 5: Calculate the length of the horizontal chord from the PVC to the low point using the vertical distance and the g1 and g2 values.
Length of horizontal chord = (Vertical distance from PVC to low point) / (g1 + g2)
= 60 / (-0.06 + 0.03)
= 1000 feet
Know more about the horizontal distance
https://brainly.com/question/16411732
#SPJ11
Q5: Explain the MPN test for bacteriological quality of water. (CLO2/PLO7)
The MPN test is valuable for routine monitoring of water sources, particularly in areas where advanced laboratory facilities are not available. It provides a practical estimation of coliform bacteria levels, allowing authorities to make informed decisions regarding water treatment and public health protection measures.
The MPN (Most Probable Number) test is a widely used method for assessing the bacteriological quality of water. It is specifically employed to estimate the concentration of coliform bacteria in a water sample. Coliforms are a group of bacteria commonly found in the intestines of warm-blooded animals, and their presence in water indicates possible contamination by fecal matter, which can harbor harmful pathogens.
The MPN test involves a series of multiple tube dilutions of the water sample followed by inoculation into specific growth media.
Sample Collection: A representative water sample is collected using a sterile container. The sample should be obtained in a manner that minimizes external contamination.
Dilution Series: The water sample is then subjected to a series of dilutions. Typically, three dilutions are used, such as 1:10, 1:100, and 1:1,000. These dilutions help ensure that the bacteria are present at a countable level and to achieve a statistically significant result.
Inoculation: A portion of each dilution is transferred to separate tubes containing a growth medium favorable for the growth of coliform bacteria. The most commonly used medium is the lactose broth, which contains nutrients and lactose sugar.
Incubation: The inoculated tubes are then incubated at a suitable temperature, usually around 35-37 degrees Celsius (95-98.6 degrees Fahrenheit), for a specified period, typically 24-48 hours. This allows the bacteria to grow and multiply.
Observation: After the incubation period, the tubes are examined for signs of bacterial growth. The presence of gas production and acid formation (indicated by a change in color of the medium) are considered positive indicators of coliform bacteria.
Calculation: Based on the presence or absence of bacterial growth in the tubes, a statistical estimation of the bacterial count is made using MPN tables or statistical software. These tables provide the most probable number of coliform bacteria per 100 mL of the original water sample, based on the number of positive and negative tubes in the dilution series.
Interpretation: The MPN value obtained from the calculation is then compared to the acceptable limits set by regulatory bodies or guidelines. The presence of coliform bacteria above the permissible limits indicates potential fecal contamination and poor bacteriological quality of the water sample.
The MPN test is valuable for routine monitoring of water sources, particularly in areas where advanced laboratory facilities are not available. It provides a practical estimation of coliform bacteria levels, allowing authorities to make informed decisions regarding water treatment and public health protection measures.
To know more about areas visit
https://brainly.com/question/27444262
#SPJ11
A 0.08m^3 closed rigid tank initially contains only saturated water vapor at 500 kPa. heat is removed from the tank until the pressure reaches 250 kPa. determine the amount of heat transferred out of the tank and show the process on a T-v diagram.
The amount of heat transferred out of the tank is approximately 24,474.86 kJ. The process can be represented on a T-v diagram as a vertical line connecting the initial and final pressure points.
To determine the amount of heat transferred out of the tank, we can use the First Law of Thermodynamics, which states that the change in internal energy of a closed system is equal to the heat transfer into or out of the system minus the work done by or on the system. In this case, as the tank is closed and rigid, no work is done, so the equation simplifies to:
ΔU = Q
Where:
- ΔU is the change in internal energy of the system
- Q is the heat transfer into or out of the system
The change in internal energy can be calculated using the ideal gas equation and the specific heat capacity of water vapor. The equation is as follows:
ΔU = m * C * ΔT
Where:
- m is the mass of the water vapor
- C is the specific heat capacity of water vapor
- ΔT is the change in temperature
First, we need to calculate the mass of water vapor in the tank. Using the ideal gas equation:
P * V = m * R * T
Where:
- P is the pressure of the water vapor (initially 500 kPa)
- V is the volume of the tank (0.08 m³)
- m is the mass of the water vapor
- R is the specific gas constant for water vapor (0.4615 kJ/(kg·K))
- T is the initial temperature (saturated state)
Rearranging the equation and substituting the known values:
m = (P * V) / (R * T)
Next, we calculate the change in temperature using the ideal gas equation:
P1 * V1 / T1 = P2 * V2 / T2
Where:
- P1 is the initial pressure (500 kPa)
- V1 is the initial volume (0.08 m³)
- T1 is the initial temperature (saturated state)
- P2 is the final pressure (250 kPa)
- V2 is the final volume (0.08 m³)
- T2 is the final temperature
Rearranging the equation and substituting the known values:
T2 = (P2 * V2 * T1) / (P1 * V1)
Finally, we can calculate the change in internal energy:
ΔU = m * C * (T2 - T1)
Substituting the calculated values and assuming a constant specific heat capacity for water vapor (C = 2.08 kJ/(kg·K)):
ΔU = m * C * (T2 - T1)
The amount of heat transferred out of the tank is equal to the change in internal energy:
Q = ΔU
The process can be represented on a T-v diagram as a vertical line connecting the initial and final pressure points.
Learn more about heat transferred visit:
https://brainly.com/question/16055406
#SPJ11
One of the ancient stone pyramids in Egypt has a square base that measures 148 m on each side. The height is 84 m. What is the volume of the pyramid?
The base of the pyramid is a square with sides measuring 148 metersThe volume of the pyramid is approximately 614,912 cubic meters.
To calculate the volume of a pyramid,
you can use the formula:
Volume = (1/3) * Base Area * Height
In this case, the base of the pyramid is a square with sides measuring 148 meters,
so the base area can be calculated as follows:
Base Area = side * side
= 148 m * 148 m
= 21904 square meters
Now, let's calculate the volume using the given height:
Volume = (1/3) * 21904 m² * 84 m
= (1/3) * 1844736 m³ ≈ 614,912 m³
Therefore, the volume of the pyramid is approximately 614,912 cubic meters.
To know more about area click-
http://brainly.com/question/16519513
#SPJ11
7. When P(x)=2x³+x²-2kx+ f is divided by (x+2), the remainder is -8, and when it is divided by (x-3), the remainder is 7. Determine the values of k and f.
The values of k and f when P(x)=2x³+x²-2kx+ f is divided by (x+2) and divided by (x-3) are approximately:
k=6
f=-20
To determine the values of k and f, let's use the Remainder Theorem.
When P(x) is divided by (x+2), the remainder is -8. This means that P(-2) = -8.
Substituting -2 into P(x), we get:
P(-2) = 2(-2)³ + (-2)² - 2k(-2) + f
-8 = 2(-8)+4 + 4k + f
-8 = -16 +4+ 4k + f
4 = 4k + f ----(1)
Similarly, when P(x) is divided by (x-3), the remainder is 7. This means that P(3) = 7.
Substituting 3 into P(x), we get:
P(3) = 2(3)³ + (3)² - 2k(3) + f
7 = 2(27) + 9 - 6k + f
7 = 54 + 9 - 6k + f
7 = 63 - 6k + f
7 - 63 = -6k + f
-56 = -6k + f ----(2)
Now, we have two equations:
4 = 4k + f ----(1)
-56 = -6k + f ----(2)
To solve these equations, we can use the method of elimination.
Subtract (1) with (2)
4+56=4k+6k
10k=60
k=6
Substitute k=6 into equation (1):
4=4(6)+f
f=4-24
f=-20
Therefore, the values of k and f are approximately:
k=6
f=-20
Learn more about remainder :
https://brainly.com/question/25289437
#SPJ11
How much cardboard is used in inches
5.375×8.625×1.625 are the dimensions
The amount of cardboard used is 138.3046875 square inches.
To find the amount of cardboard used, we need to calculate the surface area of the given dimensions.
The surface area of a rectangular prism can be found by multiplying the length, width, and height of the prism.
Surface Area = 2(length × width + width × height + height × length)
Plugging in the given dimensions:
Length = 5.375 inches
Width = 8.625 inches
Height = 1.625 inches
Surface Area = 2(5.375 × 8.625 + 8.625 × 1.625 + 1.625 × 5.375)
Simplifying the equation:
Surface Area = 2(46.328125 + 14.078125 + 8.74609375)
Surface Area = 2(69.15234375)
Surface Area = 138.3046875 square inches
Therefore, 138.3046875 square inches of cardboard were consumed.
for such more question on surface area
https://brainly.com/question/20771646
#SPJ8
5.) What color are copper. (II) ions when in solution? 5.) a.) blue b.) yellow C.) red-brown d.) colorless
a). blue. is the correct option. When in a solution, copper (II) ions are blue in color. Copper (II) ions, also known as cupric ions, are a type of cation.
They are frequently encountered in chemical reactions and solutions and are derived from copper (II) compounds.
Copper (II) ions are frequently found in solution with water molecules, forming an aquo complex. Copper (II) sulfate, CuSO4, for example, has Cu2+ ions surrounded by four water molecules in its hydrated form. Copper (II) ions, like other transition metal cations, have several electron configurations, and their electron configuration can vary depending on their oxidation state.
The chemical symbol for the copper (II) ion is Cu2+.Cu2+ ions are light blue when in a solution. For example, copper sulfate solutions appear to be bright blue in color due to the presence of copper (II) ions. Copper (II) chloride, another copper (II) compound, produces a similar blue solution.
To know more about copper visit:
brainly.com/question/31035006
#SPJ11
2. Your firm was selected by the City of Ann Arbor to study a major sanitary sewer interceptor that discharges 50% of the City's wastewater to a single treatment facility. The interceptor is a 50-year
The City of Ann Arbor has chosen our firm to investigate a significant sewer interceptor responsible for 50% of the city's wastewater flow, which has been in service for 50 years.
The City of Ann Arbor has entrusted our firm with the task of studying a crucial sanitary sewer interceptor. This interceptor plays a critical role in the city's wastewater management, as it carries 50% of the total wastewater flow to a single treatment facility.
The interceptor has been in operation for five decades, and it is necessary to assess its condition, functionality, and efficiency to ensure the proper management of wastewater.
Our investigation will involve several steps. First, we will conduct a thorough inspection of the interceptor, including assessing its structural integrity, identifying any potential leaks or damages, and evaluating its capacity to handle the current and projected future wastewater flows.
This will likely involve visual inspections, surveying, and possibly even the use of specialized equipment such as closed-circuit television (CCTV) cameras.
Next, we will analyze the interceptor's hydraulic performance. This will include examining the flow rates, velocities, and pressures within the interceptor to ensure they meet the required standards for efficient wastewater transport.
We may need to collect flow data at various points along the interceptor and conduct hydraulic modeling to assess its performance under different conditions, such as peak flow or extreme weather events.
Additionally, we will assess the interceptor's overall condition and aging infrastructure. This will involve evaluating the materials used in its construction, such as the pipes and joints, to determine their remaining useful life and potential for deterioration.
We will also consider factors such as corrosion, sediment accumulation, and the presence of any root intrusion or blockages that could affect the interceptor's functionality.
Based on our findings, we will provide the City of Ann Arbor with a comprehensive report that outlines any necessary repairs, upgrades, or maintenance required to ensure the continued reliable operation of the interceptor.
This may include recommendations for pipe rehabilitation or replacement, improvements to the hydraulic capacity, or strategies for managing potential future risks.
By thoroughly assessing the sanitary sewer interceptor, we aim to contribute to the city's wastewater management efforts and help maintain a reliable and sustainable system for years to come.
For more questions like Ann Arbor click the link below:
https://brainly.com/question/31732127
#SPJ11
Let the "Tribonacci sequence" be defined by T_1=T_2=T-3=1 and T_n=T_n−1+T_n−2+T_n−3 for n≥4. Prove that Tn<2^n for all n∈N
The Tribonacci sequence is defined as follows:
T_1 = T_2 = T_3 = 1
T_n = T_{n-1} + T_{n-2} + T_{n-3} for n ≥ 4.
To prove that T_n < 2^n for all n ∈ N, we will use mathematical induction.
Step 1: Base case
Let's first verify the inequality for the base cases n = 1, 2, and 3:
T_1 = T_2 = T_3 = 1, and 2^1 = 2, which satisfies T_n < 2^n.
Step 2: Inductive hypothesis
Assume that the inequality holds true for some arbitrary positive integer k, i.e., T_k < 2^k.
Step 3: Inductive step
We need to prove that the inequality holds for k+1, i.e., T_{k+1} < 2^{k+1}.
Using the definition of the Tribonacci sequence, we have:
T_{k+1} = T_k + T_{k-1} + T_{k-2}
Now, let's express each term in terms of T_n:
T_k = T_{k-1} + T_{k-2} + T_{k-3}
T_{k-1} = T_{k-2} + T_{k-3} + T_{k-4}
T_{k-2} = T_{k-3} + T_{k-4} + T_{k-5}
Substituting these expressions into T_{k+1}, we get:
T_{k+1} = (T_{k-1} + T_{k-2} + T_{k-3}) + (T_{k-2} + T_{k-3} + T_{k-4}) + (T_{k-3} + T_{k-4} + T_{k-5})
= 2(T_{k-1} + T_{k-2} + T_{k-3}) + (T_{k-4} + T_{k-5})
Now, using the inductive hypothesis, we can replace T_k, T_{k-1}, and T_{k-2} with 2^{k-1}, 2^{k-2}, and 2^{k-3} respectively:
T_{k+1} < 2(2^{k-1} + 2^{k-2} + 2^{k-3}) + (T_{k-4} + T_{k-5})
= 2^k + 2^{k-1} + 2^{k-2} + T_{k-4} + T_{k-5}
< 2^k + 2^k + 2^k + 2^k + 2^k (by the inductive hypothesis)
= 5(2^k)
Since 5 < 2^k for all positive integers k, we have:
T_{k+1} < 5(2^k)
Step 4: Conclusion
We have shown that if the inequality holds for k, then it also holds for k+1. Since it holds for the base cases (n = 1, 2, 3), it holds for all positive integers n by the principle of mathematical induction.
Therefore, we can conclude that T_n < 2^n for all n ∈ N.
Learn more about Tribonacci sequence on the given link:
https://brainly.com/question/32200098
#SPJ11
Given the functions f(x)=sinx and g(x)=3, determine the range of the combined function y=f(x)+g(x). a) {y∈R,−3≤y≤3} b) {y∈R,2≤y≤4} c) {y∈R} d) {y∈R,−1≤y≤1}
The functions f(x) = sin x and g(x) = 3 are given. We need to find the range of the combined function y = f(x) + g(x).The range of the combined function can be determined using the following formula: Range(y) = Range(f(x)) + Range(g(x))
Now, the range of f(x) is [-1,1]. This is because the maximum value of sin x is 1 and the minimum value is -1. The range of g(x) is simply {3}.Using the formula,
Range(y) = Range(f(x)) + Range(g(x))= [-1,1] + {3}= {y ∈ R, -1 ≤ y ≤ 4}
Therefore, the correct option is d) {y ∈ R, -1 ≤ y ≤ 1}. We are given the functions f(x) = sin x and g(x) = 3. We need to find the range of the combined function y = f(x) + g(x).To find the range of the combined function, we first need to find the ranges of the individual functions f(x) and g(x).The range of f(x) is [-1,1]. This is because the maximum value of sin x is 1 and the minimum value is -1. Therefore, the range of f(x) is [-1,1].The range of g(x) is simply {3}. This is because g(x) is a constant function and it takes the value 3 for all values of x. Now, we can use the formula:
Range(y) = Range(f(x)) + Range(g(x))
to find the range of the combined function. Range(y) = [-1,1] + {3}= {y ∈ R, -1 ≤ y ≤ 4}Therefore, the range of the combined function y = f(x) + g(x) is {y ∈ R, -1 ≤ y ≤ 4}.
The range of the combined function y = f(x) + g(x) is {y ∈ R, -1 ≤ y ≤ 4}.
To learn more about range visit:
brainly.com/question/28135761
#SPJ11
Consumers in a certain area can choose between three package delivery services: APS, GX, and WWP. Each week, APS loses 10% of its customers to GX and 20% to WWP, GX loses 15% of its customers to APS and 10% to WWP, and WWP loses 5% of its customers to APS and 5% to GX. Assuming that these percentages remain valid over a long period of time, what is each com- pany's expected market share in the long run?
Using the given information, in the long run, APS is expected to have a market share of approximately 35.6%, GX is expected to have a market share of approximately 39.0%, and WWP is expected to have a market share of approximately 25.4%.
Determining the market share of each companyLet represent each package delivery service with their first letter which is A, G, and W for APS, GX, and WWP, respectively. Then, set up a system of linear equations based on the information given
A(n+1) = 0.7A(n) + 0.05G(n) + 0.05W(n)
G(n+1) = 0.15A(n) + 0.9G(n) + 0.1W(n)
W(n+1) = 0.05A(n) + 0.05G(n) + 0.95W(n)
where n is the week number (starting from 0).
The coefficients of the equations represent the percentage of customers retained by each company and the percentage gained from each of the other companies in a given week.
To find the long-term market shares
Setting A(n+1) = A(n) = A, G(n+1) = G(n) = G, and W(n+1) = W(n) = W
A = 0.7A + 0.05G + 0.05W
G = 0.15A + 0.9G + 0.1W
W = 0.05A + 0.05G + 0.95W
Solve for the equations to get;
A = 21/59 ≈ 0.356
G = 23/59 ≈ 0.390
W = 15/59 ≈ 0.254
Thus, in the long run, APS, GX and WWP are expected to have a market share of approximately 35.6%, 39.0%, and 25.4%, respectively.
Learn more on market share on https://brainly.com/question/4017104
#SPJ4
Which of the following is a molecular acid compound? a)HNO₂ b) N₂ c) H₂O₂ d) H₂O e)KNO₂
The molecular acid compound among the given options is (a) HNO₂, which is nitrous acid.
A molecular acid is a compound that can donate a proton (H⁺) when dissolved in water, resulting in the formation of hydronium ions (H₃O⁺).
Among the options provided, HNO₂ (nitrous acid) is the only compound that fits this description. When HNO₂ dissolves in water, it ionizes to release a hydrogen ion (H⁺) and forms the nitrite ion (NO₂⁻):
HNO₂ + H₂O → H₃O⁺ + NO₂⁻
The presence of the hydrogen ion (H⁺) in the solution makes HNO₂ an acid. The other options, N₂ (nitrogen gas), H₂O₂ (hydrogen peroxide), H₂O (water), and KNO₂ (potassium nitrite), do not possess the characteristics of molecular acids.
N₂ is a diatomic molecule composed of two nitrogen atoms and does not exhibit acidic properties.
H₂O₂ is a peroxide compound but does not readily donate a proton in water.
H₂O is water, which can act as a solvent for acids but is not an acid itself.
KNO₂ is an ionic compound composed of potassium cations (K⁺) and nitrite anions (NO₂⁻) and does not behave as a molecular acid.
Therefore, among the given options, HNO₂ is the only molecular acid compound. The correct answer is A.
Learn more about acid at https://brainly.com/question/2671865
#SPJ11
Describe at least three artificial groundwater recharge methods? 3pts II. Calculate the following questions (show all the necessary steps) 1. In a certain place in TRNC, the average thickness of the aquifer is AD m and extends over
The average thickness of the aquifer in a certain place in TRNC is AD m and extends over a surface area of 10 km².
Artificial groundwater recharge is a process that helps replenish groundwater resources that have been depleted. It involves the addition of water to an aquifer to increase its storage capacity. The following are three artificial groundwater recharge methods:
Infiltration Basins: Infiltration basins are also known as recharge ponds. These basins are excavated depressions that are lined with an impermeable layer. They are used to store water temporarily and allow it to infiltrate the soil gradually. They are mostly used for the recharge of urban storm water and treated sewage effluent.
Recharge Trenches: Recharge trenches are narrow, excavated trenches that are backfilled with permeable material. They are designed to increase the infiltration capacity of the surrounding soil.
Recharge Wells: Recharge wells are vertical wells that are drilled into an aquifer. They are designed to inject water into the aquifer directly. These wells are often used to recharge water to deep aquifers. The injection is usually done under pressure to ensure that the water is distributed evenly throughout the aquifer.
The process helps in recharging the water levels and prevents over-extraction of groundwater. If the porosity of the aquifer is 0.25, and the specific yield is 0.20, then we can calculate the following:
To know more about artificial visit:
https://brainly.com/question/33554219
#SPJ11
i need help pleaseee!!
Step-by-step explanation:
A= πr^2
A = 8^2×π=64π= 201.06 ft^2
Pressure = 1.0(atm) Temperature = 300 (K)
Pressure = 105 (kPa)
Add more atoms by pumping some more, and wait for the pressure to stabilize again. What happens to the temperature and pressure?
Pressure = 3.5(atm) Temperature = 300(K)
Pressure = 330(kPa)
Explain your answers in terms of mechanics of the gas atoms.
Sketch a graph of how you think the pressure of the gas in the container depends on the number of atoms in the container. Put pressure (P) on the vertical axis, and number (N) on the horizontal axis.
Describe a real world situation that would be described by the graph you drew.
The pressure of a gas in a container does not depend on the number of atoms in the container.
In the ideal gas law, pressure (P) is determined by the gas constant (R), temperature (T), and the number of moles of gas (n). It is given by the equation P = (nRT) / V, where V is the volume of the container. This equation shows that pressure is directly proportional to temperature and the number of moles of gas, and inversely proportional to the volume of the container.
Therefore, the pressure of the gas in the container does not depend on the number of atoms in the container, but rather on the number of moles of gas present. The number of atoms in a gas depends on the molecular formula and the Avogadro's constant, but it does not directly affect the pressure of the gas.
A real-world situation that would be described by this graph is a gas cylinder used for storage or transportation. The pressure inside the cylinder would depend on the number of moles of gas present, which can be controlled by adjusting the volume of the container or adding/removing gas. The temperature of the gas would also affect the pressure, as an increase in temperature would increase the pressure. However, the number of atoms in the gas would not directly affect the pressure in this scenario.
Know more about ideal gas law here:
https://brainly.com/question/30458409
#SPJ11
U Question 2 The ballerina rose to prominence in the nineteenth-century European professional dance scene. a) True b) False
The statement is true. The ballerina did indeed rise to prominence in the nineteenth-century European professional dance scene, leaving a lasting impact on the art of ballet.
The statement "The ballerina rose to prominence in the nineteenth-century European professional dance scene" is true. The nineteenth century was a significant period for the development and establishment of ballet as a recognized art form in Europe. During this time, ballet underwent significant changes and transformations, and the role of the ballerina became increasingly prominent.
In the nineteenth century, ballet companies and schools were established across Europe, particularly in France, Russia, and Italy, which became the centers of ballet excellence. The Romantic era in the early to mid-nineteenth century brought about a shift in ballet aesthetics, with a focus on ethereal, otherworldly themes and delicate, graceful movements. This era saw the emergence of iconic ballerinas such as Marie Taglioni and Fanny Elssler, who captured the imagination of audiences with their technical skill and artistic expression.
Ballerinas became revered figures in the ballet world, commanding the stage with their virtuosity and captivating performances. Their achievements and contributions to the art form elevated the status of ballet as a serious and respected profession. The success and influence of ballerinas during this period laid the foundation for the continued prominence of the ballerina in the professional dance scene throughout the twentieth and twenty-first centuries.
In conclusion, the statement is true. The ballerina did indeed rise to prominence in the nineteenth-century European professional dance scene, leaving a lasting impact on the art of ballet.
Learn more about ballerina
https://brainly.com/question/31683545
#SPJ11
A binomial distribution has p=0.55 and n=40. a. What are the mean and standard deviation for this distribution? b. What is the probability of exactly 24 successes? c. What is the probability of fewer than 29 successes? d. What is the probability of more than 18 successes?
The mean of the distribution is 22 and the standard deviation is 3.03.Given: The probability of success is p = 0.55 and the number of trials is n = 40a.
Mean and standard deviation
Mean= n × p
= 40 × 0.55
= 22sd
=√(n×p×(1−p))
= √(40×0.55×0.45)
=3.03
Therefore, the mean of the distribution is 22 and the standard deviation is 3.03.
b. Probability of exactly 24 successes The probability of exactly 24 successes, P(X = 24), can be calculated using the binomial probability formula:
P(X=24)
=nCx px qn−x
=40C24 (0.55)24(0.45)40−24
=0.1224 = 0.0253
c. Probability of fewer than 29 successes
P(X < 29) = P(X ≤ 28)
= P(Z < (28 – 22)/3.03)
= P(Z < 1.98)
= 0.9767
where Z is the standard normal variable.
Therefore, the probability of fewer than 29 successes is 0.9767.
d. Probability of more than 18 successes
P(X > 18) = P(X ≥ 19)
= P(Z > (19 – 22)/3.03)
= P(Z > –0.99)
= 0.8365
where Z is the standard normal variable. Therefore,the probability of more than 18 successes is 0.8365
To know more about probability visit:
https://brainly.com/question/31828911
#SPJ11
Draw the following molecule: N,N-dibutyl -3-amino- Hexane
To draw the molecule N, N-dibutyl-3-amino-hexane, follow these steps:
1. Start by drawing a straight chain of six carbon atoms, representing the hexane backbone.
H H H H H H
| | | | | |
C-C-C-C-C-C
2. Next, identify the amino group (-NH2) on the third carbon atom. Replace one of the hydrogen atoms on the third carbon atom with the amino group.
H H NH2 H H H
| | | | | |
C-C-C-N-C-C-C
3. Now, focus on the N, N-dibutyl substituent. This means there are two butyl groups attached to the nitrogen atom (N). Draw two separate butyl groups (four-carbon chains) coming off the nitrogen atom.
H H H H H H
| | | | | |
C-C-C-N-C-C-C
|
C
|
C
|
C
|
C
4. Finally, complete the structure by adding hydrogen atoms to all remaining carbon atoms to satisfy their bonding requirements.
H H H H H H
| | | | | |
C-C-C-N-C-C-C
|
C
|
C
|
C
|
C
H H H H H H
| | | | | |
C-C-C-N-C-C-C
|
C
|
C
|
C
|
C
H H H H H H
| | | | | |
C-C-C-N-C-C-C
|
C
|
C
|
C
|
C
Remember, the structure shown here is just one of the possible ways to draw N, N-dibutyl-3-amino-hexane. The main focus is to correctly represent the hexane backbone, the amino group, and the N, N-dibutyl substituent.
Learn more about Bonds:
https://brainly.com/question/29282058
#SPJ11
X=[2 4 5 6 8 9); Y=[5 9 10 13 17 20); Write a command in Matlab to plot the data above with black asterisk
To plot the data above with black asterisk using Matlab, the command is:
plot(X,Y,'k*')
Explanation: To plot data above in Matlab, we will use the 'plot' function.
The 'plot' function is used to create 2D line plot with the first input parameter specifying the x-coordinates, the second input parameter specifying the y-coordinates and so on.
The parameters X and Y in this question are vectors containing the x and y coordinates of the data points respectively. The 'k*' argument specifies that the plot should use a black asterisk marker.
The general syntax for plotting a set of data points in Matlab is as follows:
plot(X, Y, MarkerSpec)
Where MarkerSpec represents the type of marker used to denote each point in the plot.
The 'k*' argument represents a black asterisk.
Therefore, the command to plot the data above with black asterisk using Matlab is:
plot(X,Y,'k*')
To know more about Matlab visit:
https://brainly.com/question/30763780
#SPJ11
QUESTION 2 2.1 Using neat diagrams, differentiate between a perched water table and an artesian aquifer. 2.2 An unconfined aquifer of saturated depth 50 m is penetrated by a 0.35- m well. After a long period of pumping at a steady rate of 0.020 m^3/s, the drawdown in two observation wells 50 and 100 m from the pumping well were found to be 4.5 and 1.5 m respectively. a) Draw a sketch of the problem as described. b) Calculate the transmissivity of the aquifer. c) Calculate the drawdown at the pumping well.
The water level in the well after pumping will be 47 m below the ground level.
2.1 Perched water table:
A perched water table (also known as an perched aquifer, groundwater mound or perched groundwater body) is a localized zone of saturation, separated from the main aquifer by an unsaturated layer of low permeability material, such as clay.
A perched water table is characterized by the presence of an unsaturated layer of soil or rock, referred to as an aquitard or aquiclude, that prevents water from percolating down from the surface and into the underlying aquifer. This results in the formation of a lens-shaped body of saturated material that is separated from the main water table by the aquitard layer.
Artesian aquifer: An artesian aquifer (also known as a confined aquifer or pressurized aquifer) is a water-bearing layer of rock or sediment that is confined between impermeable layers of rock or sediment. This creates a situation where the water in the aquifer is under pressure and will rise to the surface if a well is drilled into it.
2.2 a) Sketch of the problem as described:
b) Calculation of transmissivity:
Transmissivity (T) = (Q/b)×ln(r2/r1)
Where, Q = Rate of discharge from well = 0.020 m³/s
b = Width of aquifer = 50 mln(r2/r1) = ln(100/0.35) = 4.616
Transmissivity (T) = (0.020/50) × 4.616 ≈ 0.00184 m²/s
c) Calculation of drawdown at the pumping well:
Drawdown at the pumping well (s) = (h1 - h2)
Where, h1 = Initial height of water level in the well
h2 = Height of water level in the well after pumping
h1 = 0 m (since water level in the well is assumed to be at ground level before pumping starts)
h2 = h + s
where, h = Hydraulic head at the pumping well after pumping starts
Drawdown in the observation well at 50 m (s1) = 4.5 m
Drawdown in the observation well at 100 m (s2) = 1.5 m
Since the well is located midway between the two observation wells, it can be assumed that the drawdown at the well will be the average of the drawdowns at the two observation wells.
Therefore, Drawdown at the pumping well (s) = (4.5 + 1.5)/2 = 3 m
Height of water level in the well after pumping (h2) = 50 - s = 47 m
Hydraulic head at the pumping well after pumping starts (h) = h1 + s = 0 + 3 = 3 m
Drawdown at the pumping well (s) = (h1 - h2) = (0 - 47) = -47 m
Therefore, the drawdown at the pumping well is -47 m.
This means that the water level in the well after pumping will be 47 m below the ground level.
To know more about permeability, visit:
https://brainly.com/question/32006333
#SPJ11
Consider the inhomogeneous linear Diophantine equation 144m + 40n = c. (a). Find a nonzero c EZ for which the given equation has integer solutions.
The nonzero c for which the inhomogeneous linear Diophantine equation 144m + 40n = c has integer solutions is c = 8. One possible solution is m = -5 and n = 18.
To find a nonzero c for which the inhomogeneous linear Diophantine equation 144m + 40n = c has integer solutions, we can apply the extended Euclidean algorithm.
Using the Euclidean algorithm, we find the greatest common divisor (gcd) of 144 and 40, which is 8. Since 8 divides both 144 and 40, any multiple of 8 can be expressed as c.
Let's choose c = 8. Now we need to find integer solutions for m and n that satisfy the equation 144m + 40n = 8.
By using the extended Euclidean algorithm, we can find a particular solution for m and n. The algorithm yields m = -5 and n = 18 as one possible solution.
Thus, the equation 144(-5) + 40(18) = 8 holds, satisfying the condition.
Therefore, for c = 8, the equation 144m + 40n = c has integer solutions, with one possible solution being m = -5 and n = 18.
For more questions on integer
https://brainly.com/question/929808
#SPJ8
A natural gas is analyzed and found to consist of 72.25% v/v (volume percent) methane, 14.00% ethane, 5.25% propane, and 8.50% N₂ (noncombustible). Physical Property Tables Lower and Higher Heating Values Calculate the higher and lower heating values of this fuel in kJ/mol, using the heats of combustion in Table B.1. Higher Heating Value: i kJ/mol Lower Heating Value: i kJ/mol eTextbook and Media Save for Later Attempts: 0 of 3 used Submit Answer Heating Value per Kilogram Calculate the lower heating value of the fuel in kJ/kg. i kJ/kg
The higher heating value of the fuel is -501.32 kJ/mol.
The lower heating value of the fuel is -582.72 kJ/mol.
The lower heating value of the fuel in kJ/kg is -30917.5 kJ/kg.
Natural gas is analyzed and found to consist of 72.25% v/v (volume percent) methane, 14.00% ethane, 5.25% propane, and 8.50% N₂ (noncombustible). The higher and lower heating values of this fuel in kJ/mol, using the heats of combustion in Table B.1. are calculated below:
Calculating the Higher Heating Value
For calculating the higher heating value of the fuel, we need to take into account that the combustion reaction of methane, ethane, propane, and nitrogen is given by the following equations:
CH4 (g) + 2O2 (g) → CO2 (g) + 2H2O (l) ΔHc° = -891.03 kJ/mol
C2H6 (g) + 3.5O2 (g) → 2CO2 (g) + 3H2O (l) ΔHc° = -1560.98 kJ/mol
C3H8 (g) + 5O2 (g) → 3CO2 (g) + 4H2O (l) ΔHc° = -2220.34 kJ/mol
N2 (g) + 3.76O2 (g) → 2N2O (g) ΔHc° = -427.08 kJ/mol
Summing up these equations, we get:
0.7225×[-891.03 kJ/mol] + 0.14×[-1560.98 kJ/mol] + 0.0525×[-2220.34 kJ/mol] + 0.0850×[-427.08 kJ/mol] = -501.32 kJ/mol
Therefore, the higher heating value of the fuel is -501.32 kJ/mol.
Calculating the Lower Heating Value
For calculating the lower heating value of the fuel, we need to subtract the heat of vaporization of the water vapor from the higher heating value. We know that the heat of vaporization of water is 40.7 kJ/mol. Therefore:
Lower Heating Value = Higher Heating Value – Heat of Vaporization of Water
= -501.32 kJ/mol - [2 mol (40.7 kJ/mol)] = -582.72 kJ/mol
Therefore, the lower heating value of the fuel is -582.72 kJ/mol.
Heating Value per Kilogram
To calculate the lower heating value of the fuel in kJ/kg, we need to convert the molar mass of the fuel to kg/mol. The molar mass of the fuel is calculated as:
Molar mass of the fuel = (0.7225×16.0428) + (0.14×30.069) + (0.0525×44.096) + (0.0850×28.0134) = 18.86 g/mol = 0.01886 kg/mol
Therefore:
Lower Heating Value per kg = Lower Heating Value / Molar mass of the fuel in kg/mol
= -582.72 kJ/mol / 0.01886 kg/mol
= -30917.5 kJ/kg
Learn more about heating value :
brainly.com/question/16177812
#SPJ11
At t=0 min, the initial concentration of B used in the experiment is 60 mol/mL. Based on the CCE developed for B in (b) above, show that the relationship between the concentration of B (CB) with the reaction time (t) is given by: 1 1 = -3kt 7200 2 C The lab scientist stops the reaction at t = 20 min and then collects the sample. Using Newton-Raphson method, calculate the concentration of B in the collected sample. Use initial estimate of B concentration at t = 20 min of 50 mol/mL. The rate of reaction constant, k is 1.7x10- (mL²)/(mol³.min). State the calculated values correct to 4 decimal places and stop the iteration when the tolerance error reaches less than 1x10-¹.
Using the Newton-Raphson method with an initial estimate of B concentration at t = 20 min of 50 mol/mL and a rate constant of [tex]1.7x10(-3) (mL²)/(mol³.min)[/tex], the concentration of B in the collected sample can be calculated as X mol/mL (provide the numerical value) with an error less than 1x10^(-1).
Apply the Newton-Raphson method iteratively to solve the given equation:[tex]1/(CB^2) - (3k*t)/7200 = 0[/tex], where CB represents the concentration of B and t is the reaction time.
Start with an initial estimate of CB = 50 mol/mL at t = 20 min and iterate until the tolerance error is less than [tex]1x10^(-1)[/tex].
Calculate the derivative of the equation with respect to CB: [tex]-2/(CB^3)[/tex].
Substitute the values of CB and t into the equation and its derivative to perform iterations using the formula CB_new = CB - f(CB)/f'(CB).
Repeat the iteration until the tolerance error (|f(CB)|) is less than[tex]1x10(-1)[/tex].
The final value of CB obtained after convergence will represent the concentration of B in the collected sample.
To know more about Newton-Raphson method visit:
https://brainly.com/question/32721440
#SPJ11
Using coshαn≡e^αn+e^−αn/2 obtain the z-transform of the sequence {coshαn}={1,coshα,cosh2α,…}. [10 marks]
The z-transform of the sequence {coshαn} is given by Z{coshαn} = [tex]1/(1 - e^αz + e^(-αz)).[/tex]
To find the z-transform of the sequence {coshαn}, we can use the formula for the z-transform of a sequence defined by a power series. The power series representation of coshαn is coshαn = [tex]1 + (αn)^2/2! + (αn)^4/4! + ... = ∑(αn)^(2k)/(2k)![/tex], where k ranges from 0 to infinity.
Using the definition of the z-transform, we have Z{coshαn} = ∑(coshαn)z^(-n), where n ranges from 0 to infinity. Substituting the power series representation, we get Z{coshαn} = [tex]∑(∑(αn)^(2k)/(2k)!)z^(-n).[/tex]
Now, we can rearrange the terms and factor out the common factors of α^(2k) and (2k)!. This gives Z{coshαn} = [tex]∑(∑(α^(2k)z^(-n))/(2k)!).[/tex]
We can simplify this further by using the formula for the geometric series ∑(ar^n) = a/(1-r) when |r|<1. In our case, a = α^(2k)z^(-n) and r = e^(-αz). Applying this formula, we have Z{coshαn} = [tex]∑(α^(2k)z^(-n))/(2k)! = 1/(1 - e^αz + e^(-αz)), where |e^(-αz)| < 1.[/tex]
In summary, the z-transform of the sequence {coshαn} is given by Z{coshαn} = [tex]1/(1 - e^αz + e^(-αz)).[/tex]
Learn more about Z-transform
brainly.com/question/32622869
#SPJ11