The the precipitate : Al(OH)₃(s)
The spectator ions : 3Cl⁻ and 3K⁺
Further explanationReaction
AlCl₃ + 3KOH → Al(OH)₃ + 3KCl
From solubility rules :
Compounds of OH− are insoluble except Compounds of Li +, Na +, K +, Rb +, Cs +, NH₄⁺ , Sr²⁺, and Ba²⁺
Compounds of Cl−, Br−, I− are soluble except Ag⁺, Hg₂²⁺, Pb²⁺
So the the precipitate : Al(OH)₃(s)
net ionic reaction
AlCl₃ + 3KOH → Al(OH)₃ + 3KCl
Al³⁻+3Cl⁻+3K⁺+3OH⁻⇒Al(OH)₃(s)+3K⁺+3Cl⁻
Remove the spectator : 3Cl⁻ and 3K⁺
Al³⁻(aq)+3OH⁻(aq)⇒Al(OH)₃(s)
In a climatological sense, dryness is a function of both annual rainfall and ________.
This a geology question.
Answer:
In a climatological sense, dryness is a function of both annual rainfall and evaporation
What is the molar mass of Cr3(AsO4)2?
g/mol
To calculate the molar mass of [tex]\rm Cr_3(AsO_4)^2[/tex], we need to determine the sum of the atomic masses of all the individual atoms in the compound.
The atomic masses of the elements are as follows:
Cr (chromium) = 52.00 g/mol
As (arsenic) = 74.92 g/mol
O (oxygen) = 16.00 g/mol
Now, let's calculate the molar mass of [tex]\rm Cr_3(AsO_4)^2[/tex]:
Molar mass of Cr3(AsO4)2
= (3 * molar mass of Cr) + (2 * molar mass of As) + (8 * molar mass of O)
= (3 * 52.00 g/mol) + (2 * 74.92 g/mol) + (8 * 16.00 g/mol)
= 156.00 g/mol + 149.84 g/mol + 128.00 g/mol
= 433.84 g/mol
Therefore, the molar mass of [tex]\rm Cr_3(AsO_4)^2[/tex] is 433.84 g/mol.
Know more about atomic masses:
https://brainly.com/question/29117302
#SPJ6
Glycerol is an extremely viscus solution, density of 1.26 g/cm3, that is usually measured by weight. How many grams of glycerol are required for a reaction that calls for 3.16 mL of glycerol.
Taking into account the definition of density, the mass of grlycerol required is 3.9816 g.
Definition of densityDensity is a quantity that is defined as the measurement of the amount of mass in a given volume of a substance.
Then, the expression for the calculation of density is the quotient between the mass of a body and the volume it occupies:
density= mass÷ volume
You can observe that density is inversely proportional to volume: the smaller the volume occupied by a given mass, the higher the density.
Mass of glycerolIn this case, you know that:
Density= 1.26 g/cm³Volume= 3.16 mL= 3.16 cm³ (being 1 mL= 1 cm³)Replacing in the definition of density:
1.26 g/cm³= mass÷ 3.16 cm³
Solving:
mass= 1.26 g/cm³ ×3.16 cm³
mass= 3.9816 g
In summary, the mass of grlycerol required is 3.9816 g.
Learn more about density:
brainly.com/question/952755
brainly.com/question/1462554
#SPJ1
Which statement describes how the binary ionic compound KBr is named?
Which statement describes how the binary ionic compound KBr is named? The metal is named first, and the name is unchanged. Which of these is a property of a substance that is composed of atoms that are held together by ionic bonds?
B. The metal is named first and the name is unchanged.
An object on top of a building has a GPE of 23,048j and a mass of 39kg, What is the height of the object
Answer:
59.1 mExplanation:
The height of the object can be found by using the formula
[tex]h = \frac{p}{mg } \\ [/tex]
where
p is the potential energy
m is the mass
h is the height
g is the acceleration due to gravity which is 10 m/s²
From the question we have
[tex]h = \frac{23048}{39 \times 10} = \frac{23048}{390} \\ = 59.0974...[/tex]
We have the final answer as
59.1 mHope this helps you
If bovine haemoglobin has an extinction coefficient of 30910 L mol-1 cm-1 at 570 nm in PBS, what is the concentration of a solution reading an absorbance of 0.7?
hey sisterrrrrrrrrr its ginger charles here i hear you looking for the answer well this is your lucky day the answer is
Explanation:
The concentration of Bovine Hb with absorbance 0.7 at 570 nm has been 2.264 [tex]\mu[/tex]M.
According to Beer's law, the absorbance of the sample can be given by:
Absorbance = Extinction coefficient [tex]\rm \times[/tex] concentration [tex]\times[/tex] path length
The Bovine Hb has the extinction coefficient = 30910 L/mol/cm
The absorbance = 0.7
The path length has been 1 cm.
The concentration of the Bovine Hb can be given as:
0.7 = 30910 [tex]\times[/tex] concentration [tex]\times[/tex] 1
The concentration of Bovine Hb = 2.264 [tex]\rm \times\;10^-^6[/tex] moles/L
The concentration of Bovine Hb = 2.264 [tex]\rm \mu[/tex]moles/L
The concentration of Bovine Hb = 2.264 [tex]\mu[/tex]M.
For more information about the concentration on the basis of absorbance, refer to the link:
https://brainly.com/question/23019109
Answer rrrrrrrrr....
Answer:
The answer is "Option b".
Explanation:
[tex]\to \text{number of moles} = \frac{\text{number of atoms}}{\text{avogadro number}}[/tex]
[tex]= \frac{7.0 \times 10^{19}}{6.0221 \times 10^{23}}\\\\= 1.16 \times 10^{-4} \ moles\\\\ =1.2 \times 10^{-4} \ moles[/tex]
[tex]\to \text{sample mass}= \text{number of moles} \times \text{molar mass}[/tex]
[tex]=1.16 \times 10^{-4}\times 58.9\\\\=0.00685 \\\\ = 6.85\ g[/tex]
please help me this is due soon i really need help :'c
************24 POINTS!*********
Answer:
carbohydrates, lipids, proteins, and nucleic acids.
Explanation:
Carbohydrates serve several key functions in your body. They provide you with energy for daily tasks and are the primary fuel source for your brain's high energy demands.
The functions of lipids include storing energy, signaling, and acting as structural components of cell membranes. Lipids have applications in the cosmetic and food industries as well as in nanotechnology.
Protein has many roles in your body. It helps repair and build your body's tissues, allows metabolic reactions to take place and coordinates bodily functions. In addition to providing your body with a structural framework, proteins also maintain proper pH and fluid balance.
The functions of nucleic acids have to do with the storage and expression of genetic information. Deoxyribonucleic acid (DNA) encodes the information the cell needs to make proteins. A related type of nucleic acid, called ribonucleic acid (RNA), comes in different molecular forms that participate in protein synthesis.
When 80.0 mL of a 0.812 M barium chloride solution is combined with 40 mL of a 1.52 M potassium sulfate solution, 10.8 g of barium sulfate precipitates. What is the % yield of this reaction
Answer:
76.1%
Explanation:
The reaction that takes place is:
BaCl₂ + K₂SO₄ → BaSO₄ + 2KClFirst we determine how many moles of each reactant were added:
BaCl₂ ⇒ 80 mL * 0.812 M = 64.96 mmol BaCl₂ K₂SO₄ ⇒ 40 mL * 1.52 M = 60.8 mmol K₂SO₄Thus K₂SO₄ is the limiting reactant.
Using the moles of the limiting reactant we calculate how many moles of BaSO₄ would have been produced if the % yield was 100%:
60.8 mmol K₂SO₄ * [tex]\frac{1mmolBaSO_4}{1mmolK_2SO_4}[/tex] = 60.8 mmol BaSO₄Then we convert that theoretical amount into grams, using the molar mass of BaSO₄:
60.8 mmol BaSO₄ * 233.38 mg/mmol = 14189.504 mg BaSO₄14189.504 mg BaSO₄ / 1000 = 14.2 g BaSO₄Finally we calculate the % yield:
% yield = 10.8 g / 14.2 g * 100 %% yield = 76.1%calculate the enthalpy change for reaction in kjmol-1
Answer:
I got
−
902 kJ
for the reaction as-written. How would you rewrite this into
kJ/mol NH
3
?
The standard molar enthalpy of formation is for the formation of
1 mol
of product from its elements as they exist in nature at
25
∘
C
and
1 atm
. For example...
1
2
N
2
(
g
)
+
3
2
H
2
(
g
)
→
NH
3
(
g
)
,
Δ
H
∘
f
(
NH
3
(
g
)
)
=
−
45.9 kJ/mol
But that also means formation of elements in their standard states must yield zero enthalpy change:
1
2
O
2
(
g
)
→
1
2
O
2
(
g
)
,
Δ
H
∘
f
(
O
2
(
g
)
)
=
0
That means we can simply derive from Hess's law and that fact to get:
Δ
H
∘
r
x
n
=
∑
P
n
P
Δ
H
∘
f
,
P
−
∑
R
n
R
Δ
H
∘
f
,
R
where
n
indicates the mols of product
P
or reactant
R
. Here we actually have just summed many formation reactions together that we know have
Δ
H
∘
r
x
n
=
Δ
H
∘
f
.
Here we have:
Δ
H
∘
r
x
n
=
[
4 mols NO
(
g
)
⋅
Δ
H
∘
f
,
N
O
(
g
)
+
6 mols H
2
O
(
g
)
⋅
Δ
H
∘
f
,
H
2
O
(
g
)
]
−
[
4 mols NH
3
(
g
)
⋅
Δ
H
∘
f
,
N
H
3
(
g
)
+
0 kJ/mol
]
where we have set a zero contribution
O
2
(
g
)
right off the bat.
=
[
4 mols NO
(
g
)
⋅
91.3 kJ/mol
+
6 mols H
2
O
(
g
)
⋅
−
241.8 kJ/mol
]
−
[
4 mols NH
3
(
g
)
⋅
−
45.9 kJ/mol
+
0 kJ/mol
]
=
[
−
1085.6 kJ
]
−
[
−
183.6 kJ
]
=
−
902 kJ
for the reaction as-written.
Explanation:
How many atoms are there in 13200 g of potassium (k)
Answer:
[tex]20.33\times 10^{26}[/tex] atoms
Explanation:
Given that,
Given mass = 13200 g
Molar mass of potassium = 39.0983 g/mol
Let there are n number of moles. It is equal to mass divided by molar mass. It is equal to :
[tex]n=\dfrac{13200}{39.0983 }\\\\=337.61\ \text{mol}[/tex]
Let there are x atoms in 13200 g of potassium (k). It can be calculated :
[tex]x=n\times N_A\\\\=337.61\times 6.023\times 10^{23}\\\\=20.33\times 10^{26}[/tex]
So, there are [tex]20.33\times 10^{26}[/tex] atoms.
What do osmosis, diffusion, filtration, and the movement of ions away from like charge all have in common?
Moving material along certain gradients is necessary for osmosis, diffusion, filtration, and the transport of ions away from similar charges.
Osmosis is the flow of solvent molecules over a semi-permeable membrane from an area of lower concentration to a region of higher concentration Molecules diffuse when they travel from one area of higher concentration to another area of lower concentration The process of filtering involves moving liquid substances through a separating material known as a filter in order to separate solid particles from liquid. Due to the difference in pressures between the solid and liquid substances, this process is made feasible. Because of the difference in electrical potentials between the charges, ions move away from like charges.
Learn more about Osmosis here-
https://brainly.com/question/1799974
#SPJ9
a student made the table shown to list some contact and non contact forces
b bbbbbbbbbbbbbbbbbbbbbbbbbb
What isotope has 12 protons, 13 neutrons and 12 electrons?
Answer: Magnesium
Magnesium, in its elemental form, has 12 protons and 12 electrons. The neutrons are a different matter. Magesium's average atomic mass is 24.305 atomic mass units, but no magnesium atom has exactly this mass.
Hope this helps....... Stay safe and have a Merry Christmas!!!!!!!! :D
is yeast living or non living?
Answer:
Yeast is living.
Explanation:
Yeast is a type of fungus used in making bread. Fungus is a group of living organisms.
A student knew that it was possible to make copper (II) sulphate crystals by adding copper (II)
carbonate to dilute sulphuric acid and warming the resulting solution to drive off some ofthe
water and then leaving the solution to crystallize. He decided to make copper (II) nitrate crystals
by similar method. The only change he made was to use dilute nitric acid. He left the final
solution for several days but failed to collect any crystals. Explain why the student did not get
any crystals to collect.
(10 marks)
Examiner: ProfM. K. Abekoe
Copper (ii) nitrate is deliquescent and absorbs moisture from the atmosphere. Therefore, no crystals of copper (ii) nitrate are formed after several days.
What are deliquescent substances?Deliquescent substances are substances which when exposed to the atmosphere absorb moisture from the atmosphere to form solutions.
During the preparation of copper (ii) nitrate from copper (ii) carbonate and dilute nitric acid, the product formed is copper (ii) nitrate solution and carbon dioxide is evolved.
The equation of the reaction is given below:
CuCO₃ + HNO₃ → Cu(NO₃)₂ + H₂O + CO₂
In the preparation of copper (II) sulfate crystals, the procedure involves adding copper (ii) carbonate to dilute sulfuric acid and warming the resulting solution to drive off some of the water and then leaving the solution to crystallize.
However, unlike copper (ii) sulfate, copper (ii) nitrate is deliquescent, and as such, it absorbs ,moisture continuously from the atmosphere. Thus, no crystals of copper (ii) nitrate are formed after several days.
Learn more about deliquescence at: https://brainly.com/question/25353839
#SPJ1
The thermite reaction ,
Fe2O3(s)+2Al(s)⟶2Fe(s)+Al2O3(s),ΔH∘=−851.5kJ/mol
is one of the most exothermic reactions known. Because the heat released is sufficient to melt the iron product, the reaction is used to weld metal under the ocean. How much heat is released per mole of Al2O3produced? How does this amount of thermal energy compare with the energy released when 2 mol of protons and 2 mol of neutrons combine to form 1 mol of alpha particles?
Answer:
Explanation:
1) The ΔH shows the heat of reaction of the reaction illustrated in the question and the negative sign shows the reaction is an exothermic reaction, meaning heat is released in this reaction. The amount of heat released in this reaction is 851.5 kilojoules per mole of Al₂O₃ produced.
2) The thermal energy of this reaction is however very low when compared to the energy released when 2 moles of protons and 2 moles of neutrons combine to form 1 mole of alpha particles. This is because, the reaction illustrated in the (1) above is a normal chemical reaction while the one that involves the protons and neutrons (as described in this section 2) is a nuclear reaction which involves large amount of energy. Nuclear reactions usually involve way larger amount of energy than ordinary chemical reactions.
If 4.73 g Ar are added to 3.22 atm He in a 2.00 L cylinder at 27.0 °C. what is the total pressure of the resulting gaseous mixture?
Answer:
4.67 atm
Explanation:
Step 1: Given data
Mass of Ar (mAr): 4.73 gPartial pressure of He (pHe): 3.22 atmVolume of the container (V): 2.00 LTemperature (T): 27.0 °CStep 2: Convert "T" to Kelvin
We will use the following expression.
K = °C + 273.15
K = 27.0 °C + 273.15 = 300.2 K
Step 3: Calculate the moles of Ar
The molar mass of Ar is 39.94 g/mol.
4.73 g × 1 mol/39.94 g = 0.118 mol
Step 4: Calculate the partial pressure of Ar
We will use the ideal gas equation.
pAr × V = nAr × R × T
pAr = nAr × R × T / V
pAr = 0.118 mol × (0.0821 atm.L/mol.K) × 300.2 K / 2.00 L
pAr = 1.45 atm
Step 5: Determine the total pressure of the gaseous mixture
The total pressure of the gaseous mixture is equal to the sum of the partial pressures of the individual gases.
P = pAr + pHe = 1.45 atm + 3.22 atm = 4.67 atm
Lithium hydroxide is used in alkaline batteries. Calculate the molarity of a solution prepared by dissolving 1.495 moles of LiOH in enough water to give a final volume of 750. mL.
1) 1.99 M
2) 1.50 M
3) 1.12 M
4) 0.502 M
5) 0.00199
Answer:1)1.99 M
Explanation:
Molarity is given as = moles solute/Liter solution
The solute which is LiOH is already given in moles as 1.495 moles
Given that solution is 750 mL, we convert to liters.
Liters of the solution= mL of the solution x (1 L/1000 mL)
750 mL x (1 L/1000 mL)
0.75 L
Molarity = moles solute/Liter solution
Molarity = 1.495 moles of LiOH/0.75 L of solution
Molarity = 1.99M
The molarity of this solution is 1.99M (moles per liter).
PLS HELP PLS HELP PLS
Answer: liver and pancreas
Explanation:the pancreas makes insulin and the liver makes liquid to break down the food
Answer:
3) pancreas and liver.........
10) What is the volume ratio of hydrogen to oxygen in water production?
Answer:
2:1
Explanation:
Water molecules feature the combinations of hydrogen and oxygen atoms in a 2:1 ratio.
A car travels 30 miles on one gallon of gasoline. Gasoline costs $4.00 per gallon. Calculate the cost of driving the car 300 miles.
Answer:
40$$$
Explanation:
Reason: 300 miles × 1gallon30miles × $4.001gallon = $40
what element have 3 PELS?
Answer:
boron aluminum gallium indium
Explanation:
hope this helps you
Which of the following is true for an element that is oxidized during a redox reaction?
Group of answer choices
It gains electrons.
It gains protons.
It loses protons.
It loses electrons.
Answer:
It loses electrons.
Explanation:
When an atom is oxidized in a redox reaction, it simply loses electrons and the oxidation number increases.
An oxidized atom implies that oxidation has occurred; oxidation can be defined as:
addition of oxygen to a specieremoval of hydrogen from a specie loss of electron by an atomincrease in the oxidation number of an atomincrease in the number of electronegative atoms surrounding an element in changing from reactants to products.D. It loses electrons
Here's how it works!
Oxidation occurs when an atom, molecule, or ion loses one or more electrons. In the process of oxidation, the oxidation state of the chemical species increases. Originally, the term was used to describe when oxygen caused electron loss in reactions. I hope that helps you!
All of the following are sources of air pollution except
Under conditions of constant temperature and amount of substance, a plot of pressure VS. volume for an ideal gas will result in:__________.
a) a line
b) a parabola
c) a logarithmic function
d) none of the above
Answer:
d) none of the above
Explanation:
The law that describes the relationship between pressure and volume of an ideal gas (under constant temperature and amount of substance) is Boyle's law.
It states that pressure is inversely proportional to the volume. This would mean that a graph of P vs 1/V would be a line.
See the attached picture for a graph of P vs V.
A plot of pressure VS. volume for an ideal gas will result in d) none of the above
The following things should be considered:
Boyle's law means the law that shows the relationship that lies between the pressure and volume of ideas gas that involved the same temperature and the substance amount.Also, the pressure should be inversly proportional with respect to the volume.Therefore we can conclude that a plot of pressure VS. volume for an ideal gas will result in d) none of the above
Learn more: brainly.com/question/23334479
the outcome or results of the experiment are called the.
A. dependent variable.
B. independent variable.
C controlled variable.
D. No variable
If a truck's tires are filled to a pressure of 2.38 atm when they are 25.0
degrees Celsius, what would their pressure be, if the temperature of the
tire goes up to 52.78 degrees Celsius after driving on the highway.
Answer:
P₂ = 2.60 atm
Explanation:
Given data:
Initial pressure = 2.38 atm
Initial temperature = 25.0 °C
Final pressure = ?
Final temperature = 52.78°C
Solution:
Initial temperature = 25.0 °C (25.0+273 = 298 K)
Final temperature = 52.78°C (52.78+273 = 325.78 K)
According to Gay-Lussac Law,
The pressure of given amount of a gas is directly proportional to its temperature at constant volume and number of moles.
Mathematical relationship:
P₁/T₁ = P₂/T₂
Now we will put the values in formula:
2.38 atm / 298 K = P₂/325.78 K
P₂ = 2.38 atm × 325.78 K / 298 K
P₂ = 775.35 atm. K /293 K
P₂ = 2.60 atm
If I formed an ion, what would it's charge likely be and why?
A. -2 because it gains 2 electrons
B. +2 because it gains 2 electrons
C. +4 because it loses 4 electrons
D. -6 because it gains 2 electrons
Answer: -2 because it gains 2 electrons
Explanation:
An ion is considered to be an atom which is formed by gain or loss of electrons.
The ions are classified into two which are called the cation and anion.
The cation is classified as the positive charge formed by loss of electrons.
The anion is classified as the negative charge ion formed by gain of electrons.
On gaining two electrons, the atom would occupy -2 charge.
PLEASE HELP ME OUT!!!!!
Answer:
89.1942....
Explanation:
abundance x mass on each one, the added all together:
77.742+6.201+5.251