a) select the best set of reagents for the transformation. an alkene bonded to a tert butyl group and three hydrogens is transformed to a tert butyl group bonded to c h 2 c h 2 o h. the best reagents are:

A molecule with the same number of protons but different number of electrons is known as an isotope.

Isotopes are atoms of the same element with different numbers of neutrons, and thus different atomic mass.

Isotopes form when an atom gains or loses an electron, resulting in an atom with the same number of protons but a different number of electrons.

Atoms of the same element with different numbers of neutrons are known as isotopes. When an atom gains or loses an electron, the number of protons stays the same but the number of electrons changes.

This change in the number of electrons alters the properties of the atom, and the different forms of the same element are known as isotopes.

The number of electrons in an atom determines how an atom interacts with other atoms.

Atoms with an even number of electrons tend to interact with each other in a more stable manner than atoms with an odd number of electrons.

This is why isotopes of elements that can exist in different forms have different chemical properties.

The isotopes of an element have different weights, and this is the result of the different numbers of neutrons. Isotopes can also have different nuclear properties and different radioactive properties.

In summary, an isotope is a molecule that differs in the number of electrons, but has the same number of protons.

This change in the number of electrons alters the properties of the atom, such as its chemical and nuclear properties.

to know more about isotope refer here:

https://brainly.com/question/11680817#

#SPJ11

In the combustion analysis of 17.1 g of sugar (C12H22O11), the mass of O2 consumed is equal to 8.55 g.

This is due to the fact that the balanced equation for the combustion of sugar is C12H22O11 + 12 O2 --> 12 CO2 + 11 H2O.

This means that for every one mole of sugar that is combusted, 12 moles of O2 are needed.

To calculate the mass of O2 consumed, the number of moles of sugar must first be calculated using the molar mass of sugar, which is 342.3 g/mol.

Therefore, 17.1 g of sugar is equal to 0.05 moles of sugar. Then, using the balanced equation, it can be seen that 0.05 moles of sugar require 0.6 moles of O2.

Finally, the mass of O2 consumed can be determined by multiplying the number of moles of O2 by the molar mass of O2, which is 32 g/mol.

Therefore, 0.6 moles of O2 is equal to 19.2 g, which is equivalent to 8.55 g of O2 consumed.

to know moremore about combustion refer here:

https://brainly.com/question/15117038#

#SPJ11

The increased distance across the cell will result in an increase absorbance reading.

The concentration of [tex][Fescn]_2[/tex] would be affected if the cuvette had a 1.5 cm path length rather than the 1.0 cm value used.Since the absorbance of a sample is proportional to the concentration of a sample (as described by the Beer-Lambert law), increasing the path length of the cuvette would result in a decrease in absorbance. This means that the concentration of the sample would be lower than if the 1 cm path length was used. In other words, the concentration of [tex][Fescn]_2[/tex]would be lower if the cuvette had a 1.5 cm path length than if it had a 1.0 cm path length.

learn more about cuvette Refer:brainly.com/question/29385690

#SPJ1

The best method to separate a 1:1 mixture of aniline and ethylbenzene is through

distillation

.

Distillation is a process that involves heating the mixture to its boiling point, which causes the components to vaporize. As the vapors cool and condense, the liquid components will separate into their pure forms.

Since the boiling points of aniline and

ethylbenzene

differ significantly Aniline boiling point: 184°C; Ethylbenzene boiling point: 135°C.

The process of distillation involves heating the mixture in a distillation apparatus.

As the temperature increases, the vaporized components of the mixture will travel up a condenser and then be collected separately in two separate flasks.

During this process,

aniline

will be the first component to vaporize and travel up the condenser, while ethylbenzene will follow suit.

The two components will condense in their respective flasks and can then be collected and isolated.

In conclusion,

Distillation is the best method to separate a 1:1 mixture of aniline and ethylbenzene due to the fact that it utilizes their differences in boiling points to allow for the collection of the two components in their pure forms.

This is achieved by heating the mixture in a distillation apparatus and condensing the vapors in two separate flasks.

to know more about

distillation

refer here:

https://brainly.com/question/29037176#

#SPJ11

The correct name for the compound is pyrrole.

Pyrrole is a five-membered aromatic heterocyclic compound consisting of one nitrogen atom and four carbon atoms. It is a heterocyclic aromatic organic compound having the chemical formula C4H4NH

Explanation :

What is pyrrole?

Pyrroles are heterocyclic aromatic compounds with a five-membered ring containing four carbon atoms and one nitrogen atom. Pyrrole and its derivatives, which include a nitrogen atom in the five-membered ring, are widely used in organic synthesis.

Pyrrole is a nitrogen-containing organic compound that occurs naturally.

The five-membered ring of pyrrole includes four carbon atoms and one nitrogen atom. It is a strong and stable organic compound that is critical in the synthesis of many organic molecules.

Pyrrole is a fundamental structure in many organic molecules, as well as a fundamental molecule in porphyrins, which are essential compounds in living cells. Pyrrole is often used in organic synthesis as a starting material, and it has a variety of other applications in different fields.

Pyrrole-containing molecules, such as the neurotransmitter serotonin and the heme group of hemoglobin, are important in biological systems.

To know more about the pyrrole https://brainly.com/question/13196842

#SPJ11

The stoichiometric coefficients can be used to connect the rates at which certain components appear or vanish in the reactions that are described. Applying this to the responses given,

1. Reaction: N₂(g) + 3H₂(g) → 2NH₃(g)

Given reaction rate: 0.032 M NH₃/s

According to the stoichiometry:

Therefore, the rate of disappearance of N₂ is given by:

Rate of disappearance of N₂ = (0.032 M NH₃/s) * (1 mol N₂ / 2 mol NH₃)

= 0.016 M N₂/s.

Similarly, the rate of disappearance of H₂ is given by:

Rate of disappearance of H₂ = (0.032 M NH₃/s) * (3 mol H₂ / 2 mol NH₃)

= 0.048 M H₂/s.

2. Reaction: CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(g)

Given reaction rate: 2.6 M CH₄/s

According to the stoichiometry:

Therefore, the rate of appearance of CO₂ is given by:

Rate of appearance of CO₂ = (2.6 M CH₄/s) * (1 mol CO₂ / 1 mol CH₄) = 2.6 M CO₂/s.

Similarly, the rate of appearance of H₂O is given by:

Rate of appearance of H₂O = (2.6 M CH₄/s) * (2 mol H₂O / 1 mol CH₄)

= 5.2 M H₂O/s.

Thus, we used the stoichiometric coefficients to relate the rates of different components in the reactions.

For more details regarding stoichiometric coefficients, visit:

https://brainly.com/question/32088573

#SPJ12

Your question seems incomplete, the probable complete question is:

In the lab activity, the reaction rate was determined by the appearance of a product. However, the reaction rate can also be determined by the disappearance of a reactant. --aructi or Rate-a[Reactant] In each situation below, you are given a rate measured by the appearance of one component of the reaction and are asked to predict the rate of appearance or disappearance of another component, based on logic and stoichiometric relationships. For example, if the reaction is as follows: A +2B Products For every mole of A that is used, 2 moles of B are used so the rate of disappearance of B is twice the rate of the disappearance of A. This may be expressed as: Rate =-=-N2(g) + 3H2 (g) ? 2NH3(g) The reaction rate is measured as 0.032 M NHy/s. Determine the rate of disappearance of N2 and the rate of disappearance H2. Explain how you arrived at your answers. CH4(g)+202(g) -CO2(g)+2H,0(8) The reaction rate is measured as 2.6 M CH/s. Determine the rate of appearance of CO2 and the rate of appearance of H20. Explain how you arrived at your answers

According to the second law of Faraday, the oxidation number of gold ions is +3.

The second law of Faraday is also known as Faraday's law of electrolysis. According to this, the quantity of a substance that is deposited or released during electrolysis is directly proportional to the amount of electric charge that is transported through the electrolyte.

Given information,

Mass of silver (Ag) deposited = 0.732 g

Mass of gold (Au) deposited = 0.446 g

According to this law,

Weight of Ag/Equivalent weight of Ag = Weight of Au/Equivalent weight of Au

0.732/108 = 0.446/196.96 × valency

Since the equivalent weight of Ag is 108g and the equivalent weight of Au is 196.96g.

0.0067 = 0.0022  × valency

Valency = 0.0067/ 0.0022

Valency = 3

Therefore, the oxidation state of the gold ion (Au⁺³) is +3.

Learn more about Faraday's law, here:

https://brainly.com/question/1640558

#SPJ6

The resulting mixture is basic because the KOH is a strong base and the HBr is a weak acid.

To determine whether the resulting mixture is acidic, basic, or neutral, the concentration of hydroxide ions (OH-) and hydronium ions (H+) in the solution is compared. Since KOH is a base and HBr is an acid, it is essential to determine the net ionic equation. Here's the balanced chemical equation:

KOH(aq) + HBr(aq) → KBr(aq) + H2O(l)

Since the balanced equation represents a neutralization reaction, the concentration of OH- and H+ can be determined based on the reaction. Therefore, in the reaction, the number of OH- ions will be equal to the number of H+ ions.In the above reaction, 1 mole of KOH reacts with 1 mole of HBr to form 1 mole of KBr and 1 mole of water. As a result, the mole of KOH added in the reaction is;

Number of moles of KOH = volume × concentration= 3.0 ml × (4.0 mol/L)/1000 mL/L= 0.012 mol

The mole of HBr reacted in the reaction is:

Number of moles of HBr = volume × concentration= 6.0 mL × (0.30 mol/L)/1000 mL/L= 0.0018 mol

Therefore, the number of moles of HBr is less than the number of moles of KOH. Since KOH is a base and HBr is an acid, the net ionic equation is as follows:

H+ + OH- → H2O

In this reaction, the number of OH- ions is greater than the number of H+ ions; therefore, the solution is basic. Therefore, the resulting mixture is basic.

More on acid/bases: https://brainly.com/question/31030349

#SPJ11

The given triprotic acid H₃A has pka's of 2.50, 5.75, and 9.25.

The pkb for the base A³⁻ can be calculated using the formula: pka + pkb = 14, where pka is the acid dissociation constant and pkb is the base dissociation constant.

Using this formula, we can first calculate the value of the third pkb as follows:

pka + pkb = 14 ⇒

pkb = 14 - 9.25

= 4.75

Similarly, we can calculate the second pkb:pka + pkb = 14

⇒ pkb

= 14 - 5.75

= 8.25

Now, we can calculate the first pkb:pka + pkb = 14 ⇒ pkb = 14 - 2.5 = 11.5

Therefore, the pkb values for the base A³⁻ are 11.5, 8.25, and 4.75 respectively.

To know more about base dissociation constant click on below link:

https://brainly.com/question/28197409#

#SPJ11

The formation of a reddish brown color precipitate ([tex]Cu_{2}O[/tex]) is an indication of a positive Benedict's test. The Benedict's test is a chemical test used to identify the presence of reducing sugars, and the formation of brick-red precipitate, indicates a positive result.

The substances tested are usually aqueous solutions of simple sugars (like glucose) or complex carbohydrates (like starch). The result is indicated by the formation of copper oxide (tex]Cu_{2}O[/tex]) or copper (Cu) in a reaction with a solution of Benedict's reagent.

A positive Benedict's test is indicated by the formation of [tex]Cu_{2}O[/tex].The Benedict's test is a semi-quantitative method that is commonly used to detect the presence of reducing sugars in a solution. The copper (II) ions in the Benedict's solution are reduced to copper (I) ions when they react with the reducing sugars, resulting in a precipitate. The copper (I) oxide ([tex]Cu_{2}O[/tex]) precipitate, which is reddish-brown in color, forms when there is a positive Benedict's test reaction.

The correct option is A. [tex]Cu_{2}O[/tex].

For more questions related to Benedict's test.

https://brainly.com/question/25800056

#SPJ11

The toxic substance that is responsible for the symptoms of the flushing syndrome is acetaldehyde.

Flushing syndrome is also known as alcohol flush reaction (AFR). It is a condition that occurs after alcohol consumption. It is a genetic predisposition that results in the body's inability to metabolize and break down acetaldehyde efficiently.

Acetaldehyde is produced when alcohol is metabolized by the liver. Flushing syndrome symptoms include facial flushing, rapid heartbeat, nausea, vomiting, abdominal pain, headache, dizziness, light-headedness, sweating and redness of the skin.

Acetaldehyde is a toxic substance that is responsible for the symptoms of the flushing syndrome. The toxic substance is produced when alcohol is broken down by alcohol dehydrogenase in the liver.

Acetaldehyde is then broken down into acetate by the enzyme acetaldehyde dehydrogenase. However, if acetaldehyde is not metabolized efficiently, it can cause the flushing syndrome.

Thus, the flushing syndrome occurs when there is an accumulation of acetaldehyde in the bloodstream.

Learn more about acetaldehyde: https://brainly.com/question/28945966

#SPJ11

If we assume that the melting points and TLC are in agreement, then we can use them to determine the purity of the solids.

The purest solid would have the highest melting point and the most distinct TLC spot. We can compare the values to ascertain which solid is the purest if the melting points and TLC are in agreement. It may be a sign that the extraction was unsuccessful or that there were impurities in the sample if there is a significant difference between the melting points or the spots on the TLC.

It's crucial to remember that melting points and TLC are not always accurate indications of purity because other variables can influence them. However, they can be a helpful tool for determining the success of an extraction experiment if the values are consistent and in agreement.

Learn more about  melting point

brainly.com/question/40140

#SPJ4

The strain energy (in kJ/mol and kcal/mol) for various alkane interactions/compounds are: H:H eclipsing – 4.0 kJ/mol, 1.0 kcal/mol, H: CH3 eclipsing – 5.8 kJ/mol, 1.4 kcal/mol.

The strain energy for alkanes interaction is as follows: H : H eclipsing - 4.0 KJ/mol or 1.0 Kcal/mol: CH3 eclipsing - 5.8 KJ/mol or 1.4 Kcal/mol CH3 : CH3 eclipsing - 11.0 KJ/mol or 2.6 Kcal/mol.

Gauche butane - 3.8 KJ/mol or 0.9 Kcal/mol Cyclopropane - 115 KJ/mol or 27.5 Kcal/molCyclobutane - 110 KJ/mol or 26.3 Kcal/molCyclopentane - 26.0 KJ/mol or 6.2 Kcal/molCycloheptane - 26.2 KJ/mol or 6.3 Kcal/molCyclooctane - 40.5 KJ/mol or 9.7 Kcal/moL. The energy units are written in uppercase. The difference between kj/mol and kcal/mol is that kj/mol is the SI unit of energy, and kcal/mol is the cgs unit of energy.

Read more about energy:

https://brainly.com/question/13881533

#SPJ11

Answer: 15.0667

Explanation:

The product of the reaction sequence below is

2-methyl-1-hexanol

and 2-methyl-2-hexanol.


The reaction sequence starts with 2-methyl-1-hexanol and 2-methyl-2-hexanol. These molecules react to form a

carbocation

intermediate, which is then attacked by a molecule of water. This forms a tertiary alcohol,

1-heptanol

. Finally, 1-heptanol undergoes dehydration to form a double bond, forming 2-heptanol.


The overall reaction is an example of a

hydration

reaction, in which a molecule of water is added to the substrate in order to produce an alcohol. This reaction is catalyzed by an acid, such as sulfuric acid. The acid helps to activate the carbocation intermediate, allowing it to be attacked by the nucleophilic water molecule.


The reaction is an example of a Markovnikov addition, in which the hydrogen atom of the water molecule is added to the carbon with the most hydrogens already attached. In this reaction, the hydrogen is added to the primary carbon of the alkene, and the double bond shifts to the secondary carbon. This forms the tertiary alcohol, 1-heptanol.
Finally, 1-heptanol undergoes dehydration to form a double bond, forming 2-heptanol. This is an example of an E1 elimination reaction, in which the alcohol is protonated and then the proton is abstracted by a base, forming the alkene.


In conclusion, the product of the reaction sequence is 2-methyl-1-hexanol and 2-methyl-2-hexanol.

To know more about

hydration

reaction

click on below link:

https://brainly.com/question/12951675

#SPJ11

Answer: The percentage by mass of sodium carbonate (Na2CO3) in an aqueous solution of sodium carbonate is 15.10%.

The percentage by mass of sodium carbonate (Na2CO3) in an aqueous solution of sodium carbonate is calculated by dividing the mass of sodium carbonate (3.11 g) by the total mass of the solution (20.6 g).


This gives us a ratio of 0.1510, which can be converted to a percentage by multiplying by 100. This results in a percentage by mass of sodium carbonate of 15.10%.


The percentage by mass of sodium carbonate can also be calculated using the following equation:

Percentage by mass of sodium carbonate = (Mass of sodium carbonate / Total mass of solution) * 100

In this case, we can substitute the known values of the mass of sodium carbonate (3.11 g) and the total mass of the solution (20.6 g) into the equation to calculate the percentage by mass of sodium carbonate in the solution.


We first divide the mass of sodium carbonate (3.11 g) by the total mass of the solution (20.6 g). This gives us a ratio of 0.1510.


We then multiply this ratio by 100 to convert it into a percentage. This gives us a percentage by mass of sodium carbonate of 15.10%.


In conclusion, the percentage by mass of sodium carbonate (Na2CO3) in an aqueous solution of sodium carbonate is 15.10%.


Learn more about percentage of chemicals here:

https://brainly.com/question/14962135#

#SPJ11

Under standard conditions (298 K and 1 atm), neither statement is true.

Diamond and graphite are both forms of carbon and are in a state of equilibrium under standard conditions. This means that neither diamond nor graphite will spontaneously convert to the other form.

Therefore, the correct answer is option (c): none of the above.

For more questions like thermodynamic visit the link below:

The thermodynamic equilibrium constant In a chemical equilibrium, K is the appropriate quotient of species activities. Under normal temperatures and pressures, an activity cannot be very many orders of magnitude more than 1.

The definition of thermodynamic properties is "system characteristics that can specify the state of the system." Certain constants, like R, are not attributes since they do not describe the state of a system.

Thermodynamics states that the conversion of diamond to graphite occurs spontaneously and is favourable. Yet, this reaction moves extremely slowly because kinetics, not thermodynamics, regulates it. As a result, diamond is thermodynamically unstable but kinetically stable.

https://brainly.com/question/29508731

#SPJ11

0.493 is the equilibrium constant (k p ) for [tex]PCl_5[/tex] (g) ⇌ [tex]PCl_3[/tex] (g) + [tex]Cl_2[/tex] (g) reaction at 500k.

The reaction is given as

[tex]PCl_5[/tex] (g) ⇌ [tex]PCl_3[/tex] (g) + [tex]Cl_2[/tex] (g)

At 500 K, the partial pressure of [tex]PCl_5[/tex] is 0.860 atm, [tex]PCl_3[/tex] is 0.350 atm, and [tex]Cl_2[/tex] is 1.22 atm.

To calculate the equilibrium constant ([tex]K_P[/tex]) for this reaction, we need to use the equation

[tex]K_P[/tex] = [[tex]PCl_3[/tex]] [[tex]Cl_2[/tex]] / [[tex]PCl_5[/tex]]

Here, [[tex]PCl_5[/tex]] = 0.860 atm

[[tex]PCl_3[/tex]] = 0.350 atm

[[tex]Cl_2[/tex]] = 1.22 atm

Substituting these values, we get

[tex]K_P[/tex] = (0.350)(1.22) / 0.860

[tex]K_P[/tex] = 0.493

Therefore, the equilibrium constant ([tex]K_P[/tex]) for this reaction at 500 K is 0.493.

Learn more about equilibrium constant: https://brainly.com/question/19340344

#SPJ11

The volume 0.200 M NaOH (in mL) needed to completely react with 50.00 mL of 0.0500 M CH₃COOH is 12.5 mL

The volume of NaOH needed can be obtained as shown below:

The balanced equation is given as follow:

CH₃COOH + NaOH -> CH₃COONa + H₂O

CaVa / CbVb = nA / nB

(0.05 × 50) / (0.2 × Vb) = 1

2.5 / (0.2 × Vb) = 1

Cross multiply

1 × 0.2 × Vb = 2.5

0.2 × Vb = 2.5

Divide both side by 0.2

Vb = 2.5 / 0.2

Vb = 12.5 mL

Thus, the volume of NaOH needed is 12.5 mL

Learn more about volume:

https://brainly.com/question/19053582

#SPJ1

Answer: The volume of gas released from the tank at the peak of Mt. Everest is 37.83 liters.

Explanation: To solve this problem, we can use the general gas law equation:

PV = nRT

where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature (in Kelvin).

We can rearrange this equation to solve for volume:

V = nRT/P

We are given the internal gas pressure of the tank (P) and the volume of the tank (10.0 L). We need to find the volume of gas released from the tank (V). We also know that the temperature and number of moles of gas are constant (assuming no leaks or temperature changes during the climb).

To find the volume of gas released at the peak of Mt. Everest (150 mm Hg), we can use the following steps:

Convert the internal gas pressure of the tank to atm:

3.04 x 10¹ mm Hg x (1 atm / 760 mm Hg) = 0.004 atm

Convert the peak pressure to atm:

150 mm Hg x (1 atm / 760 mm Hg) = 0.197 atm

Plug in the known values to the equation:

V = nRT/P

V = nRT / (0.197 atm)

Solve for V:

V = (nRT) / (0.197 atm)

We can assume that the number of moles of gas, n, and the temperature, T, are constant. R is also a constant (0.08206 L atm / mol K).

So we can simplify the equation to:

V = constant / P

V = k / 0.197

where k is a constant. We can solve for k by using the initial conditions:

10.0 L = k / 0.004

k = 0.04 L atm

Now we can use this value of k to find the volume of gas released at the peak of Mt. Everest:

V = k / 0.197

V = 0.04 L atm / 0.197

V = 0.203 L

But this is the volume of gas at standard conditions (0°C and 1 atm). We need to correct for the temperature and pressure at the peak. To do this, we can use the following equation:

(P1 V1) / (n1 T1) = (P2 V2) / (n2 T2)

where the subscripts 1 and 2 refer to the initial and final states of the gas.

We can assume that n and V are constant, so this equation simplifies to:

P1 / T1 = P2 / T2

We can solve for T2:

T2 = (P2 T1) / P1

T1 is the initial temperature of the gas (room temperature, about 20°C or 293 K). P1 is the initial pressure of the gas (0.004 atm). P2 is the final pressure of the gas (0.197 atm).

T2 = (0.197 atm x 293 K) / 0.004 atm

T2 = 14,502 K

This temperature is obviously not physically realistic, but it shows that the volume of gas is greatly affected by the low pressure and temperature at the peak of Mt. Everest. To correct for this, we can assume that the gas behaves ideally and use the ideal gas law equation:

PV = nRT

We can solve for V:

V = (P2 V1 T1) / (P1 T2)

V = (0.197 atm x 10.0 L x 293 K) / (0.004 atm x 14,502 K)

V = 37.83 L

So the volume of gas released from the tank at the peak of Mt. Everest is about 38 liters.

Hope this helps, and have a great day!

To find the percent by volume concentration for 50.00 ml of a 50% NaCl solution added to more solvent to make 120.00ml of solution, we need to use the following equation:

Volume (V) = Concentration (C) x Amount (A)

We know the amount (A) of NaCl is 50.00 ml, and we know the concentration (C) is 50%. Therefore, we can rearrange the equation to solve for V:

V = 50% x 50.00 ml

V = 25.00 ml

We also know that the total volume of the solution is 120.00 ml, so we can subtract 25.00 ml from 120.00 ml to get the volume of the solvent.
120.00 ml - 25.00 ml = 95.00 ml of solvent

To calculate the percent by volume concentration, we need to divide the volume of NaCl (25.00 ml) by the total volume (120.00 ml) and multiply by 100%.
25.00 ml/120.00 ml x 100% = 20.83%

Therefore, the percent by volume concentration of 50.00 ml of a 50% NaCl solution added to more solvent to make 120.00ml of solution is 20.83%.

Learn more about percent by volume concentration at: https://brainly.com/question/12427481

#SPJ11

Chemical equation: The reaction can be described by: KI + H2SO4 -> K2SO4 + H2O -> I2 The potassium iodide (KI), which contains iodide ions (I-), is oxidised by the sulfuric acid to produce molecular iodine in this reaction (I2).

Deep violet vapours with a strong scent would develop when concentrated sulfuric acid was added drop by drop to solid potassium iodide. If concentrated sulfuric acid is gradually introduced to solid potassium chloride, it will not result in the formation of these violet fumes.

Iodide ions are created when sodium sulphite and potassium iodate combine, and this process also results in the oxidation of iodide ions in an acidic medium.

To know more about iodine visit:-

https://brainly.com/question/16867213

#SPJ9

Brass Door Plates and door knobs have been used on doors for centuries. Solid Brass fixtures fell out of favour only during the last couple of decades of the 20th century, largely because of the need regularly polish the metal to maintain its shine. Manufacturers began to lacquer (or varnish) their brass products to maintain a bright yellow finish, and lacquer eventually began to be regarded as gaudy by some people. This led to Brass falling by the wayside in favour of ‘cleaner’ looking metals, such as stainless steel, aluminium, and polished chrome.Several scientific studies have recently been published which suggest that Brass handles, door plates, door knobs and handrails should be brought back into regular use in public buildings, to help combat bacteria and germs, amazingly including hospital superbugs such as E-coli and MRSA Copper is the predominant metal used in the mixing of Brass Alloy. This means that copper-based metals such as brass, can prevent bacteria from spreading, and even completely destroy germs and bacteria.Researchers found that plastic and stainless steel surfaces, which are now the most widely used surfaces in hospitals and public buildings, allow bacteria to survive and spread when people touch them. The especially nasty viruses Norovirus and C-Diff can survive for much longer. Norovirus can survive for several weeks, while in one study C-Diff was shown to survive for an incredible five months.Researchers found that copper-based alloy surfaces have the ability to destroy a wide range of microbes and bacteria relatively rapidly - often within two hours or less. Several studies found that if touch surfaces are made with copper-based alloys, the reduced transmission of disease-causing bacteria can reduce patient infections in hospitals by as much as 58%.Copper has even been shown to be very effective at exterminating the much-dreaded hospital ‘superbug’ MRSA. In tests sponsored by the Copper Development Association, a grouping of 100 million MSRA bacteria atrophied and died in a just 90 minutes, when placed on a copper surface at room temperature. The same study found that the same number of MSRA bacteria on both steel and aluminium surfaces actually increased over time. On looking at these figures, many scientists have concluded that the installation of copper-based fixtures such as taps, light switches, door handles, door knobs, pull handles, and push plates in areas such as hospitals could save thousands of lives each year.In research published in the journal Molecular Genetics of Bacteria Professor Keevil wrote: “There are a lot of bugs on our hands that we are spreading around by touching surfaces. In a public building or mass transport, surfaces cannot be cleaned for long periods of time… Until relatively recently brass was a relatively commonly used surface. On stainless steel surfaces these bacteria can survive for weeks, but on copper surfaces they die within minutes… We live in this new world of stainless steel and plastic, but perhaps we should go back to using brass more instead.”In addition to direct contact killing of bacteria and harmful microbes, amazingly Copper surfaces have been found to exude an antimicrobial 'halo' effect on surrounding non-copper surfaces. Research in the intensive care unit a Hospital in Greece found that other surfaces up to 50 centimetres from copper surfaces experienced 70% microbial reduction, compared to the same surfaces with no proximity to copper-based materials. The ‘Halo’ effect was also observed in trials at a U.S. clinic in 2010. This amazing effect demonstrates just how powerful copper is as a weapon against bacteria.Since this research has come to light, historians have pointed out that some ancient civilizations were aware of the antimicrobial properties of copper, thousands of years before the concept of microbes became understood by modern science. In addition to the use of copper medicinal preparations, ancient people observed that water stored in copper vessels was of better quality than water contained or transported in other materials, as no slime can form on copper surfaces. In addition, the healing power of copper was recognized by the Aztecs and the Ancient Egyptians to sterilize wounds, drinking water, and used the metal to treat skin conditions.Several scientific studies suggest that copper surfaces affect bacteria in two ways. The first step is a direct interaction between the surface and the bacteria’s outer membrane, causing this to rupture. The second step involves the holes in the outer membrane, through which the cell loses essential nutrients and waterWhen the cells main defense membrane is breached, a stream of copper ions can enter the cell. Copper literally overwhelms the inside of the cell and obstructs the cell metabolism. It binds to the cell’s enzymes, causing its essential activity to stop. After this process, the bacteria can no longer "breathe", "eat" or "digest" and is thus essentially dead.

I would argue against Tony's claim that the temperature of a solid cannot be measured, just because solids do not have a lot of thermal expansion.

Thermal expansion is the tendency of materials to change in size, shape, or volume in response to changes in temperature.

There are several ways to measure the temperature of solids. One common method is to use a thermometer, which can be inserted into the solid to measure its temperature. Another method is to use an infrared thermometer, which measures the temperature of a solid by detecting the amount of infrared radiation it emits.

Second, while it is true that solids have a lower coefficient of thermal expansion than liquids or gases, they still expand and contract with changes in temperature. This is evident in Valdez's example of the wooden door, which becomes difficult to open in the summer when the temperature is higher, and easier to open in the winter when the temperature is lower. This change in the size of the door is due to thermal expansion and contraction of the wood.

To find out more about thermal expansion, visit:

https://brainly.com/question/30242448

#SPJ1

A face-centered cubic unit cell is the repeating unit in which type of crystal packing: cubic closest-packed, option B.

Solids can be thought of as having a structure similar to that of a piece of wallpaper in three dimensions. Wallpaper has a recurring pattern that is consistent and runs from edge to edge. Similar repeating patterns may be found in crystals, however in this case, the patterns span three dimensions from one edge of the solid to the other.

By describing the dimensions, form, and content of the most basic repeating unit in the pattern, we may accurately describe a piece of wallpaper. The smallest repeating unit's dimensions, composition, and arrangement on top of one another to form the crystal may be used to characterise a three-dimensional crystal.

Learn more about Unit cell;

https://brainly.com/question/12977980

#SPJ4

Complete question:

A face-centered cubic unit cell is the repeating unit in which type of crystal packing A) hexagonal close-packing B)cubic close-packed C)body centered D)simple E)all of the above

To recognize and test the purity of caffine , the tests which could be performed are melting point determination, UV-visible spectroscopy, and high-performance liquid chromatography (HPLC).

In order to identify that the given substance is caffeine, you can use several analytical techniques. Here are three techniques to characterize caffeine and their applications:

Melting Point Determination:

It is a physical method which is  used in order to determine the purity of a substance. The melting point of caffeine is in the range of 235-238 °C. Hence, by measuring the melting point of the extracted caffeine and comparing it with the expected value of pure caffine, you can confirm that the substance you have extracted is caffeine.

UV-Visible Spectroscopy:

UV-Visible spectroscopy can be used to identify caffeine by analyzing the absorption of UV light by the molecule. Caffeine has a characteristic absorption peak at 273 nm. By measuring the UV spectrum of the extracted caffeine and comparing it to the literature value, you can confirm the presence of caffeine.

High-Performance Liquid Chromatography (HPLC):

It is a widely used technique for the separation, identification, and quantification of substances. By using this technique, you can separate and quantify the different components of the extracted caffeine, including its impurities. By comparing the range of melting point of the caffeine to the peak areas of known standards, you can calculate the purity of your extracted caffeine.

Therefore it can be said that the melting point determination, UV-Visible spectroscopy, and High-Performance Liquid Chromatography are three analytical techniques that can be used to confirm the identity and purity of extracted caffeine.

Learn more about caffine :

https://brainly.com/question/24482629

#SPJ4

The physical process that is primarily responsible for the purification achieved during recrystallization is the process of selective solubility.

The process of selective solubility refers to the ability of a substance to selectively dissolve in a particular solvent or a combination of solvents. The substance that is more soluble in a solvent will dissolve in that solvent while the impurities that are less soluble will remain undissolved.

The process of recrystallization is used to purify a solid that contains impurities. In this process, a solid is dissolved in a solvent that is heated to the boiling point. Once the solution is saturated, it is cooled slowly, and crystals are allowed to form. During recrystallization, the impurities are excluded from the growing crystals because of their lower solubility in the solvent, and the crystals that form are pure.

Therefore, the process of selective solubility is primarily responsible for the purification achieved during recrystallization.

Learn more about selective solubility here: https://brainly.com/question/13198024.

#SPJ11

The metal is most likely to be aluminum, based on the given information. Aluminum has a density of 2.7 g/cm3 and a unit cell edge of 408.2 pm, which closely matches the given density and unit cell edge.

Crystallization is the process in which a material, usually a solid, organizes its molecules into an ordered and symmetrical arrangement.

The crystalline structure of a metal determines its physical properties, including its density and lattice constant.

In this case, the metal crystallizes in a face-centered lattice, which means that the unit cell edge is equal to four times the length of the lattice parameter.

Therefore, the edge of the unit cell, 409 pm, implies that the lattice parameter is equal to 102.25 pm.

Aluminum is the only metal that has a density and lattice parameter close to the given values. Therefore, it is the most likely metal in this situation.

to know more about aluminum refer here:

https://brainly.com/question/9496279#

#SPJ11

Answer:Gco is 0.953

Explanation:

Answer:

in the first box the answer will be=37.2

and in the second box= 22.4