A sample of iron was determined to have a mass of 27.3162g and a volume of 3.475 cm³. What is the density of the iron sample?

If the chewable contains 80. mg acetaminophen and dosage is 10. mg per body mass The tablets needed for the 42 pound child is 2.38 tablets

To calculate the number of tablets needed for a 42 pound child, we need to use the recommended dosage of 10 mg of acetaminophen per kilogram of body weight.

First, we need to convert the child's weight from pounds to kilograms:

42 pounds = 19.05 kilograms

Next, we can calculate the total amount of acetaminophen that the child needs based on their weight:

19.05 kg x 10 mg/kg = 190.5 mg

Finally, we can divide the total amount of acetaminophen needed by the amount of acetaminophen per tablet:

190.5 mg ÷ 80 mg/tablet = 2.38 tablets

Since we can't give a partial tablet, we would round up to 3 tablets.

Read more on acetaminophen here:https://brainly.com/question/14465174

#SPJ1

Answer:

B. the number of waves that pass through a fixed point in a certain amount of time. Wave frequency measures how many waves (or cycles) of a wave pattern pass through a fixed point per unit of time, usually measured in hertz (Hz).

Explanation:

Wave frequency measures the number of waves that pass through a fixed point in a certain amount of time. This is also known as the number of cycles per second, measured in hertz (Hz). It is a fundamental property of waves, including sound waves, electromagnetic waves, and water waves.

For example, if a sound wave has a frequency of 440 Hz, it means that 440 cycles of the wave occur in one second. Similarly, if an electromagnetic wave has a frequency of 5 GHz (5 billion hertz), it means that the wave oscillates 5 billion times per second.

Wave frequency is important in understanding many aspects of waves, including their behavior, interactions with other waves and matter, and how they are detected and measured. It is also related to other wave properties, such as wavelength and wave speed, through mathematical relationships.

The complete and balanced reaction equation is: CuSO3(s) -> CuO(s) + SO2(g)

The reaction between HCI (hydrochloric acid) and CuSO3 (copper(II) sulfite) is not a valid chemical equation.

Copper(II) sulfite is not a stable compound, and it decomposes readily in air to form copper(II) oxide (CuO) and sulfur dioxide (SO2) according to the following equation:

CuSO3(s) -> CuO(s) + SO2(g)

The balanced equation for this reaction is: https://brainly.com/question/14258973

CuSO3(s) -> CuO(s) + SO2(g)

The gas formed in this reaction is sulfur dioxide (SO2).

More on balancing reactions can be found here: https://brainly.com/question/14280002

#SPJ1

Explanation:

Refer to pic..........

2.00 L of a 1.50 M NaOH solution is a chemical notation that describes a solution containing sodium hydroxide (NaOH) dissolved in water. Specifically, it indicates that there are 1.50 moles of NaOH dissolved per liter of solution for 3.00 moles of NaOH in 2.00 liters.

Molarity, also known as molar concentration, measures the concentration of a solute in a solution. It is described as the number of moles of solute per liter of solution. The formula for calculating molarity is Molarity = moles of solute/volume of solution in liters.

Molarity and normality are both measures of concentration in chemistry, but they are calculated differently and used for different types of reactions. Molarity (M) is defined as the number of moles of solute per liter of solution and is used to describe the concentration of a solution. Normality (N), on the other hand, normality (N) is defined as the number of gram-equivalent weights of solute per liter of solution.

To learn more about solutions, visit here:

https://brainly.com/question/30665317

#SPJ1

The solar energy is a massive source of energy which can generate electricity and reduce the global warming emissions. But the set up of solar panels have both positives and negatives.

The manufacturing process of solar panels requires hazardous chemicals and materials for cleaning the semiconductors. The chemicals include hydrofluoric acid, sulfuric acid, etc.

In addition to the release of these chemicals, the solar panel manufactures inhale silicon dust which threatens the public health. The solar energy systems require a large area of land which can lead to the loss of wildlife habitats.

The construction of solar panels also affect soil compaction and erosion.

To know more about solar panels, visit;

https://brainly.com/question/28458069

#SPJ1

The purpose of this lab was to explore the concept of percent yield and to determine how it can be affected during experimentation. We learned that percent yield is the ratio of the actual yield of a product.

Ratio is a mathematical comparison of two related values or quantities. It is expressed as a fractional relationship, such as "2 to 4," "1:4," or "2/4." In mathematics, ratios are used to make comparisons between two or more quantities. Ratios can be used to measure how one quantity is related to another, or to compare two or more items. For example, if a person weighs 120 pounds and their height is 5 feet, the ratio of their weight to their height is 120:5 or 24:1. Ratios can also be used to compare items in different categories, such as the number of people in a group to the number of cars they own, or the number of apples to oranges in a basket.

To learn more about ratio

https://brainly.com/question/30217944

#SPJ9

Answer:

gram of Ni = 79.8g

Explanation:

Mark as brainliest

Answer:

At STP (Standard Temperature and Pressure), the temperature is 273.15 K (0°C) and the pressure is 1 atm. The molar volume of any gas at STP is 22.4 L/mol.

Explanation:

Therefore, the volume of 225 moles of gas at STP would be:

V = n * V_m

where

V = volume of the gas

n = number of moles of the gas

V_m = molar volume of the gas at STP = 22.4 L/mol

Substituting the values, we get:

V = 225 mol * 22.4 L/mol

V = 5040 L

So the volume of 225 moles of a gas at STP would be 5040 liters.

Answer:

5049 L

Explanation:

got the answer correct

Answer:

1.yes

2.invasive species are_ accidentally transported to a new ecosystem

3.false

4.increase

5.

6.fencing

sorry I don't know the fifth one but I hope it helpful

From the balanced chemical equation:

2CuFeS2 + 5O2 → 2Cu + 2FeO + 4SO2

We can see that for every 5 moles of oxygen (O2) that react, 4 moles of sulfur dioxide (SO2) are produced. Therefore, we can use a proportion to calculate the number of moles of O2 required to produce 12 moles of SO2:

5 moles O2 : 4 moles SO2 = x moles O2 : 12 moles SO2

Cross-multiplying, we get:

5 moles O2 x 12 moles SO2 = 4 moles SO2 x (x moles O2)

60 = 4x

x = 15

Therefore, 15 moles of O2 are required to generate 12 moles of SO2 gas.

Answer:

15 was right on acellus

Explanation:

Answer:

water density

Explanation:

These deep-ocean currents are driven by differences in the water's density, which is controlled by temperature (thermo) and salinity (haline). This process is known as thermohaline circulation

your welcome!

Hello there! Here are the answers you're looking for!

1: displacement reaction

2: (I can't really answer this one for you because i don't know what the items you used in your lab were, But ill just say Highly Toxic Chemicals)

3: a substance that increases the rate of a chemical reaction without itself undergoing any permanent chemical change.

4: (same thing here, i don't know what your lab was about! So i cant answer how it was used here.)

Sorry, i could not answer 2 of them, But hopefully, you get a good grade! Hope this helps!!

Virtual labs provide a space where we can study the properties of compounds through virtual simulations. It is possible that the properties of a substance vary  from what observed in virtual labs.

What is virtual lab?

A virtual lab provides a virtual space to study the structure and properties of substances by computer simulations. By the assistance of virtual labs we can conduct experiments and draw structure of different compounds.

Virtual labs provide an online platform of advanced options and tools to manage an experiment and 3D simulations of molecules of any bond type.

However these tools are mainly based on theoretical predictions and what we observe in real may differ due to various factors. First of all the environment we conduct an experiment and the materials quality etc. affect the result.

Moreover external factors such temperature, pressure etc. also influence on the result we obtain ultimately. The effect of these factors cannot be included accurately in virtual labs.

Therefore, the It is possible that the properties of a substance vary  from what observed in virtual labs.

The 25 is the new volume of this gas at 5 degrees Celcius and 2 atm.

What is temperature ?

Temperature is a unit used to represent how hot or cold something is. It can be stated using the Celsius or Fahrenheit scales, among others. Temperature shows which way heat energy will naturally flow, i.e., from a hotter (body with a higher temperature) to a colder (body with a lower temperature) (one at a lower temperature).

What is volume ?

Space is occupied by every three-dimensional object. Its volume serves as a gauge for this area. The area contained by an object's limits in three-dimensional space is referred to as its volume. Another name for it is an object's capacity.

Therefore, 25 is the new volume of this gas at 5 degrees Celcius and 2 atm.

Learn more about temperature from the given link.

https://brainly.com/question/25677592

#SPJ1

The bubble's volume upon rising near the top of aquarium where the pressure is 1.01 atm and temperature is 116°C is 0.869 mL

Volume of gas can be defined as the space occupied by gaseous particles at standard temperature and pressure conditions.

As we know, (P₁V₁)/T1 = (P₂ V₂)/ T₂

P₁, V₁, and T₁ are initial pressure, volume, and temperature, and P₂, V₂, and T₂ are final pressure, volume, and temperature.

T₁ = 12°C + 273.15 = 285.15 K

T₂ = 116°C + 273.15 = 389.15 K

(P₁V₁) /T₁ = (P₂V₂)/T₂

(1.54 atm × 0.650 mL) / 285.15 K = (1.01 atm × V₂) / 389.15 K

So, V₂ = (1.54 atm × 0.650 mL × 389.15 K) / (1.01 atm × 285.15 K)

V₂ = 0.869 mL

Therefore, the bubble's volume upon rising near the top of the aquarium where the pressure is 1.01 atm and the temperature is 116°C is 0.869 mL

To know more about gas volume, refer

https://brainly.com/question/27100414

#SPJ1

Answer:

Explanation:

The types and numbers of atoms that repeat to make up a substance, which is also known as its chemical composition, have a significant impact on the substance's properties.

For example, the number of atoms in a molecule can affect its mass and density, as well as its reactivity with other substances. The types of atoms present can affect the chemical reactivity, melting and boiling points, and other physical properties of the substance.

Additionally, the arrangement of atoms in a molecule can also affect its properties. For example, the orientation of atoms can affect the molecule's polarity, which can affect its solubility in different solvents.

In summary, the types and numbers of atoms that repeat to make up a substance can have a significant impact on its properties, including its chemical and physical properties.

The equilibrium shifts in the direction that  tends to oppose the change done.

Chemical equilibrium is the state of a system in which the rate of the forward reaction is equal to the rate of the reverse reaction.

Chemical equilibrium is a dynamic process. The forward and reverse reactions continue to occur even after equilibrium has been reached. However, because the rates of the reactions are the same, there is no change in the relative concentrations of reactants and products for a reaction that is at equilibrium.

The equilibrium reaction is given as -

                                 2 CO + O₂ ⇒ 2CO₂

ΔH = negative

This means that the forward reaction is exothermic.

Addition of oxygen shifts the equilibrium towards the product side.

When the temperature is increased the backward reaction will be favored and the equilibrium will be shifted towards the reactant side.

Cooling below 100⁰C results into shifting the equilibrium towards product side.

Adding a catalyst does not alter the direction of equilibrium.

Doubling the pressure would shift the equilibrium towards product side.

Adding a base to absorb CO₂ would shifts the equilibrium towards the product side.

Therefore, The equilibrium shifts in the direction that  tends to oppose the change done.

Learn more about Chemical equilibrium, here:

https://brainly.com/question/12920261

#SPJ9

Answer :Adding of oxygen shifts the equilibrium to the right side which is the product side.

increasing of the temperature will shift the equilibrium to the left side which is the reactant side

cooling below 100c will shift the equilibrium to the right side which is the product side

Adding a catalyst does not affect the chemical equilibrium

Doubling the pressure would shift the equilibrium to the right side which is the product side

Adding a base to absorb CO2 would shift the equilibrium to the product side

Explanation:

Answer:

(a) Cr3+ and Br- will form CrBr3 (chromium(III) bromide)

(b) Fe3+ and O2- will form Fe2O3 (iron(III) oxide)

(c) Hg22+ and CO32- will form Hg2CO3 (mercury(I) carbonate)

(d) Ca2+ and ClO3- will form Ca(ClO3)2 (calcium chlorate)

(e) NH4+ and PO43- will form (NH4)3PO4 (ammonium phosphate)

Explanation:

chatGPT

The chemical formulas for the compounds formed by the given pairs of ions are: (a) CrBr3, (b) Fe2O3, (c) Hg2(CO3)2, (d) Ca(ClO3)2, and (e) (NH4)3PO4.

(a) Cr3+ and Br- : In order to form a neutral compound, the charges of the ions must balance. The charge of Cr3+ is 3+ and the charge of Br- is 1-. To balance the charges, we need three Br- ions for every Cr3+ ion. Therefore, the chemical formula is CrBr3.

(b) Fe3+ and O2- : The charge of Fe3+ is 3+ and the charge of O2- is 2-. To balance the charges, we need two O2- ions for every Fe3+ ion. Therefore, the chemical formula is Fe2O3.

(c) Hg22+ and CO2- : The charge of Hg22+ is 2+ and the charge of CO2- is 2-. The charges are already balanced, so no extra ions are needed. Therefore, the chemical formula is Hg2(CO3)2.

(d) Ca2+ and ClO3- : The charge of Ca2+ is 2+ and the charge of ClO3- is 1-. To balance the charges, we need two ClO3- ions for every Ca2+ ion. Therefore, the chemical formula is Ca(ClO3)2.

(e) NH4+ and PO3- : The charge of NH4+ is 1+ and the charge of PO3- is 3-. To balance the charges, we need three NH4+ ions for every PO3- ion. Therefore, the chemical formula is (NH4)3PO4.

https://brainly.com/question/36379566

#SPJ3

Including the title, abstract, introduction, techniques & materials, results, commentary, conclusion, & references, a lab report is divided into eight components.

This lab is equipped with all the tools required for sample preparation as well as the standards needed for a variety of fluid and solid sample analyses. Glassware, exhaust fans, a muffled furnace, centrifuges, aggregate mills, and ovens are among the conventional equipment found in the lab.

It gives you an opportunity to put your knowledge to use while reinforcing the topics you have studied in class. You will gain knowledge of certain crucial experimental skills that are required if you want to work as a successful chemist.

To know more about labs visit:

https://brainly.com/question/29296260

#SPJ1

Aluminum sulfate is very non-toxic, having acute and chronic oral LD50 values above 5,000mg/kg (5). Alum, on the other hand, can cause irritation, burns, and breathing problems.

What is Aluminium sulfate used for?

Aluminum sulfate is a crystalline (sand-like) solid that is odorless, white or colorless. It is utilized in sewage treatment, water purification, paper production, and leather tanning. Aluminum sulfate is also known as alum or papermaker's alum; however, the term "alum" refers to any double sulfate salt having the general formula XAl(SO4)212H2O, where X is a monovalent cation such as potassium or ammonium (5).

Learn more about Aluminum sulfate,

https://brainly.com/question/20758434

#SPJ1

0.0025 moles correspond to 1.56 × 10²¹ atoms of sodium.

The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter.

A mole is defined as the amount of substance containing the same number of atoms, molecules, ions, etc. as the number of atoms in a sample of pure 12C weighing exactly 12 g.

Given,

Atoms of sodium = 1.56 × 10²¹ atoms

we know that,

1 mole = 6.023 × 10²³ atoms

Number of moles of sodium = number of atoms ÷ 6.023 × 10²³

                                               = 1.56 × 10²¹ atoms ÷ 6.023 × 10²³

                                                = 0.0025 moles of sodium

Therefore,  0.0025 moles correspond to 1.56 × 10²¹ atoms of sodium.

Learn more about Moles, here:

https://brainly.com/question/20486415

#SPJ9

The doctor would then be aware of Greg's weight of 108.6 kg.

Typically, you won't be allowed to eat or drink for six hours prior to the procedure, although you can drink water. Moreover, you should refrain from intense activity for 24 hours before to your consultation. It's wise to dress comfortably and loosely.

The internal organs and tissues of your body are depicted in great detail by a CT scan. A PET scan can be more sensitive than other imaging procedures and can detect aberrant activity. Also, it can cause your body to alter sooner. PET-CT scans are used by doctors to reveal more details about the cancer.

To know more about PET scan visit:-

https://brainly.com/question/1343244

#SPJ1

The amount of heat transferred would be 1269.67 J.

To calculate the heat transferred (q), we can use the specific heat capacity (c) of aluminum, which is 0.903 J/g°C, the mass of aluminum (m), and the change in temperature (ΔT):

q = m x c x ΔT

where ΔT = (final temperature - initial temperature)

Substituting the given values, we get:

ΔT = 71.6°C - 32.5°C = 39.1°C

m = 36.4 g

c = 0.903 J/g°C

q = 36.4 g x 0.903 J/g°C x 39.1°C

q = 1269.67 J

Therefore, the heat transferred when the temperature of 36.4g of aluminum is raised from 32.5°C to 71.6°C is 1269.67 J.

More on heat transfer can be found here: https://brainly.com/question/13433948

#SPJ1

When something gets cold, it absorbs energy in the form of cold energy from its environment. This energy is released as heat when the object is heated up again.

Energy is the ability to do work. It is the capacity to cause change, move objects, and make things happen. Energy can come from different sources, such as the sun, fossil fuels, and nuclear power. Energy can also be stored, such as in batteries, food, or chemical compounds. It is a fundamental part of the universe, and it is necessary for life to exist. Energy can take many forms, such as kinetic, potential, thermal, chemical, electromagnetic, and nuclear energy. Kinetic energy is energy that is in motion, such as a moving car or a flying bird. Potential energy is energy stored in an object due to its position or composition, such as a rock at the top of a hill. Thermal energy is the energy of heat, such as the heat from a fire.

To learn more about energy

https://brainly.com/question/24772394

#SPJ1

Silver nitrate, sodium hydroxide, ammonium chloride, and potassium iodide (KI, AgNO3, NH4Cl) (NaOH).

One of your blood's electrolytes is chloride. Chloride blood tests verify that you have the right amounts of chloride within your blood for good health. Chloride levels in the blood can be abnormal for a variety of reasons, including dehydration, vomiting, and certain medical diseases.

A measurement of a chloride concentration is the blood chloride value. Specifically, the number of milliequivalents of chloride per liter. Hypochloremia, then, is a condition in which your blood chloride concentration is below normal. Hyperchloremia is the medical term for having excessive levels of chloride within your blood.

To know more about chloride visit:

https://brainly.com/question/13211879

#SPJ1

To solve this problem, we need to use the molar mass of copper and the stoichiometry of the balanced equation to determine how much chalcopyrite is needed to produce 400 g of pure copper.

The molar mass of copper is 63.55 g/mol, which means that 1 mole of copper contains 63.55 grams of copper. Using this information, we can convert 400 g of copper to moles:

400 g Cu x (1 mol Cu/ 63.55 g Cu) = 6.292 mol Cu

From the balanced equation of the reaction, we know that 1 mole of chalcopyrite (CuFeS2) produces 1 mole of copper. Therefore, we need to mine the same number of moles of chalcopyrite as the number of moles of copper required.

To determine the number of moles of chalcopyrite needed, we can use the molar mass of chalcopyrite:

Molar mass of CuFeS2 = (1 x atomic mass of Cu) + (1 x atomic mass of Fe) + (2 x atomic mass of S)

= (1 x 63.55 g/mol) + (1 x 55.85 g/mol) + (2 x 32.06 g/mol)

= 183.53 g/mol

Now we can convert the moles of copper to moles of chalcopyrite:

6.292 mol CuFeS2 x (183.53 g CuFeS2/ 1 mol CuFeS2) = 1154.4 g or 1.1544 kg of CuFeS2

Therefore, we need to mine 1.1544 kg of chalcopyrite to obtain 400 g of pure copper.

Answer:

I think it's B

Explanation:

Oceans and Seas and the Water Cycle Completed. The oceans are, by far, the largest storehouse of water on earth — over 96% of all of Earth's water exists in the oceans. Not only do the oceans provide evaporated water to the water cycle, they also allow water to move all around the globe as ocean currents.

Good luck!

At chemical equilibrium, the partial pressure of the three gases is 0.265 atmospheres.

Chemical equilibrium is defined as the condition which arises during the course of a reversible chemical reaction with no net change in amount of reactants and products.A reversible chemical reaction is the one wherein the products as soon as they are formed react together to produce back the reactants.

At equilibrium, the two opposing reactions which take place take place at equal rates and there is no net change in amount of the substances which are involved in the chemical reaction.At equilibrium, the reaction is considered to be complete . Conditions which are required for equilibrium are given by quantitative formulation.

Learn more about chemical equilibrium,here:

https://brainly.com/question/3920294

#SPJ9

Cl2 is the limiting reactant and the unreacted Al is 1.7 g

We know that the reaction equation is;

2Al + 3Cl2 ------> 2AlCl3

Now we know that;

Number of moles of Al = 2.7/27 g/mol

= 0.1 moles

Number of moles of Cl2 = 4.0 g/71 g/mol

= 0.056 moles

If 2 moles of Al reacts with 3 moles of Cl2

0.1 moles of Al reacts with 0.1 * 3/2

= 0.15 moles

The Cl2 is the limiting reactant

Now;

2 moles of Al reacts with 3 moles of Cl2

x moles of Al reacts with 0.056 moles of Cl2

x = 0.037 moles

Moles of unreacted Al = 0.1 moles - 0.037 moles

= 0.063 moles

Mass of unreacted Al =  0.063 moles * 27 g/mol

= 1.7 g

Learn more about reaction:https://brainly.com/question/28984750

#SPJ1