Answer:
We can approach this problem using the conservation of momentum and the conservation of kinetic energy.
Conservation of momentum:
The momentum before the collision is given by:
p1 = m1v1 = m1viî
where m1 is the mass of each proton (which we assume to be the same) and v1 is the velocity of the initially moving proton.
The momentum after the collision is given by:
p2 = m1v1' + m1v2'
where v1' and v2' are the velocities of the two protons after the collision.
Since the collision is elastic, the total momentum is conserved:
p1 = p2
m1viî = m1v1' + m1v2'
We can simplify this equation by dividing both sides by m1:
viî = v1' + v2'
Conservation of kinetic energy:
The kinetic energy before the collision is given by:
K1 = (1/2)m1 We need the value of the velocity v1, which is not given in the problem statement.
b) A rocket initially moving at v0=3.5 km/s in space fires its engines. The initial mass of rocket is m0=200,000 kg and the final mass of the rocket is m=20,000 kg. If the exhaust velocity is ve=5.2 km/s, calculate the final speed in km/s.
The final speed of the rocket is -11.8 km/s.
What is the final speed of the rocket?The final speed of the rocket is calculated by applying the principle of conservation of linear momentum.
m0v0 = mv + (m0 - m)ve
where;
m0 is initial massv0 is the initial speedve is exhaust velocityThe final speed of the rocket is calculated as;
200,000 kg x 3.5 km/s = 20,000 kg x v + (200,000 kg - 20,000 kg) x 5.2 km/s
700,000 = 20,000v + 936,000
v = -236,000/20,000
v = -11.8 km/s
Learn more about final speed here: https://brainly.com/question/25905661
#SPJ1
I don’t understand this pls help
1 Consider a ring, sphere and Solidey clinder all with the same mass. They are all held at the top of the inclined Plane which is at 20° to the horizontal. the top of the inclined Plane is 1m high. The shapes are released simultaneously and allowed to roll down the inclined plane. Assume the abjects roll with out slipping and that they are all made from the same material. Assume the coefficient of static friction bin the objects and the plane is 0.3.
A) which shapes have the greater moment of inertia ?
B) workout what order they would get to the bottom of the Slope!
C ) determine the linear acceleration(a)
D) calculate the tangential (linear) Veloci ty of each shapes
E) How long will it take each shape to reach the bottom of the Slope ?
I give you 100 coin please help me
-
Which of the following is the dimension of moment of inertia? (a) ML2 (b) MLT-1 (c) L2T 2 (d) L T-1
The dimension of the moment of inertia is [tex]ML^2[/tex]. Option A.
What is the moment of inertia?The moment of inertia represents the resistance of a body to rotational motion. It depends on the body's mass and the distribution of that mass around the axis of rotation.
The formula for the moment of inertia involves mass and distance and is expressed as:
I = mr^2
where
m is the mass of the bodyr is the distance from the axis of rotation.The dimension of mass is represented by M, and the dimension of distance is represented by L. Therefore, the dimension of moment of inertia is:
Moment of inertia = mass x distance^2 = M x L^2 = [tex]ML^2[/tex].
More on moment of inertia can be found here: https://brainly.com/question/15246709
#SPJ1
which of the following best describe the weather conditions at location B
The best description on the weather conditions at location A and B is :It is warmer at position A than at position B.
Therefore Option (D) is correct
What is meant by weather conditions?Weather condition is described as the regional weather during a defined time period from one up to several weeks describing typical weather phenomena, such as a series of thunderstorm in hot summer, foggy month in autumn or other weather conditions which are typical for a specific region and/or season.
From the given image, a warm front is being shown. Here, the region comprising letter A is the warm zone and the region above the front comprising the letter B indicates a cold zone. The position A forms a low-pressure zone, so it is comparatively warmer than the position B.
Learn more about Weather condition at:
https://brainly.com/question/29332171
#SPJ1
#complete question:
Which of the following statements best describes the weather conditions at positions A and B shown below?
A. It is raining at position A and clear at position B.
B. It is cloudy at position A and clear at position B.
C. It is cooler at position A than at position B.
D. It is warmer at position A than at position B.
1. Two resistors R₁ (12 ohm) and R₁ (24 ohm) are
connected in series across a 6.0 V battery
of negligible internal resistance.
Draw a circuit diagram (to the right) and calculate:
The total resistance of the two resistors:
The total current flowing in the circuit:
The current flowing in R₁
The current flowing in R2
The total power consumed by R₁ and R₂
11
Here's the circuit diagram:
```
+---R₁---R₂---+
| |
- -
(6V) ( )
|
|
|
|
|
|
|
( )
-
```
Calculations:
1. The total resistance of the two resistors:
R_total = R₁ + R₂
= 12 ohm + 24 ohm
= 36 ohm
Answer: 36 ohm
2. The total current flowing in the circuit:
I = V / R_total
= 6.0 V / 36 ohm
= 0.167 A
Answer: 0.167 A
3. The current flowing in R₁:
I₁ = V / R₁
= 6.0 V / 12 ohm
= 0.5 A
Answer: 0.5 A
4. The current flowing in R₂:
I₂ = V / R₂
= 6.0 V / 24 ohm
= 0.25 A
Answer: 0.25 A
5. The total power consumed by R₁ and R₂:
P = I² * R_total
= (I₁ + I₂)² * R_total
= (0.5 A + 0.25 A)² * 36 ohm
= 0.1875 * 36 ohm
= 6.75 W
Answer: 6.75 W
A thin beam of light falls on mirror 1 as shown in the diagram below. four P.Q.Rands are placed in front of mirror 1 and mirror 2. Mirror 2 J|||||| RE Nanda wants to find out on which tikely box in the diagram in the beam to fall after reflecting off mirrov 1 and mirrov 2 List the steps that he should Follow in the correct order.
The steps assume that the mirrors and boxes are arranged in a simple, two-dimensional configuration.
The steps to be followedThe steps to be followed are;
Determine the angle of incidence of the beam of light on mirror 1. This can be done by drawing a line perpendicular to the mirror at the point where the beam of light hits the mirror and measuring the angle between this line and the incident beam of light.Use the law of reflection to determine the angle of reflection of the beam of light from mirror 1. This angle will be equal to the angle of incidence.Use the properties of parallel lines and angles to determine the angle of incidence of the beam of light on mirror 2. This can be done by noting that mirror 2 is parallel to mirror 1 and that the angle of incidence of the beam of light on mirror 2 will be equal to the angle of reflection of the beam of light from mirror 1.Use the law of reflection again to determine the angle of reflection of the beam of light from mirror 2. This angle will be equal to the angle of incidence of the beam of light on the likely box.Use the properties of parallel lines and angles again to determine the angle of incidence of the beam of light on each of the boxes in the diagram. The box that has an angle of incidence equal to the angle of reflection of the beam of light from mirror 2 is the likely box where the beam of light will fall.Learn more on reflection of mirror here https://brainly.in/question/54972410
#SPJ1
What is the current theory about the formation of the solar system?
Responses
About 14 billion years ago, several supernova events scattered all the known elements throughout the galaxy. The magnetic elements were attracted to each other and formed the early celestial bodies that eventually became the planets of the solar system.
About 14 billion years ago, several supernova events scattered all the known elements throughout the galaxy. The magnetic elements were attracted to each other and formed the early celestial bodies that eventually became the planets of the solar system.
A big bang occurred in the solar system as a result of a fusion reaction. All the matter in the solar system that had been clumped together was shattered and sent flying. As new pieces of matter connected, all the celestial bodies of the solar system were formed.
A big bang occurred in the solar system as a result of a fusion reaction. All the matter in the solar system that had been clumped together was shattered and sent flying. As new pieces of matter connected, all the celestial bodies of the solar system were formed.
The area of the universe that was to become the solar system went through a period of vast expansion as a result of rapid radioactive decay that left behind clouds of dust and gases. The excess clouds and gases were used to form the various parts of the solar system.
The area of the universe that was to become the solar system went through a period of vast expansion as a result of rapid radioactive decay that left behind clouds of dust and gases. The excess clouds and gases were used to form the various parts of the solar system.
The solar system began as a cloud of dust and gas that condensed, forming a bulging middle and an outer disk. The bulging middle of the cloud became the sun, and the rest of the dust and gas formed the planets, orbiting the sun in the same plane.
The current theory about the formation of the solar system is that it began as a cloud of dust and gas, known as the solar nebula which is the last response.
What happened to the nebula?The nebula collapsed under its own gravity, forming a spinning disk with a bulging middle that became the sun. The remaining dust and gas in the disk coalesced into small bodies, which collided and stuck together, forming the planets.
This process, known as accretion, resulted in the four inner planets, which are small and rocky, and the four outer planets, which are large and gas-rich.
Find out more on solar system here: https://brainly.com/question/1286910
#SPJ1
What is the difference between analog signal and digital signal. Explained in essay form.
A continuous signal that changes in frequency and amplitude over time is referred to as an analogue signal. A digital signal one can only take on a small number of values and is commonly represented by 0s and 1s.
Being able to take on any value within a continuous range of values makes it the perfect choice for simulating physical phenomena like temperature, sound, and light. Analogue signals include things like radio waves, vinyl records, and conventional telephone networks. Modern communication and computing systems use digital signals instead of analogue ones because they can be transferred and processed more effectively and are less prone to noise. Computer networks and digital cameras are few examples of digital signals.
To know more about Computer networks, here
brainly.com/question/14276789
#SPJ1
Two moles of helium gas initially at 268 K
and 0.51 atm are compressed isothermally to
1.5 atm. Find the final volume of the gas. Assume
that helium behaves as an ideal gas. The
universal gas constant is 8.31451 J/K · mol.
answer in units m^3
The final volume of the gas is 1,515.24 m³.
What is the final volume of the gas?The final volume of the gas is calculated by applying ideal gas law;
PV = nRT
Where;
P is the pressureV is the volumen is the number of molesR is the universal gas constantT is the temperature.At a constant temperature, we will have the following equation;
P₁V₁ = P₂V₂
V₂ = (P₁V₁) / P₂
V₂ = (0.51 atm)(2 mol)(8.31451 J/K·mol)(268 K) / (1.5 atm)
V₂ = 1,515.24 m³
Learn more about final volume here: https://brainly.com/question/29441065
#SPJ1
A is a sphere that is traveling with velocity of (3,7)m/s and had a mass of 5 kg .it collide with sphere B and both particle move together with velocity of (1,4)m/s after the collision. Sphere B has a mass of 4 kg . Find the velocity of B before the collision
The velocity of sphere B is -1.475 m/s. Which is in opposite direction to the direction of sphere A.
What is velocity?Velocity is the rate of change of displacement.
To calculate the velocity of sphere B before collision, we use the formula below
Formula:
u = [V(M+m)-Mu']/m................... Equation 1Where:
u = Velocity of sphere B before collisionV = Velocity of both particles after collisionM = Mass of sphere Am = Mass of sphereu' = Velocity of sphere B before collisionFrom the question,
Given:
V = 1.4 m/sM = 5 kgm = 4 kgu' = 3.7 m/sSubstitute these values into equation 1
u = [1.4(5+4)-(5×3.7)]/4u = (12.6-18.5)/4u = -5.9/4u = -1.475Hence, the velocity of sphere B is -1.475 m/s.
Learn more about velocity here: https://brainly.com/question/25749514
#SPJ1
Will the placement of the continents on Earth look different in 100 million years than today?
Answer:
Yes
Explanation:
Continents is constantly moving, but at very slow rate.
This is due to the movement of the tectonic plate underneath the earth surface.
On average they move about 10 cm per year.
So in 100 million, they will move 10,000 km.
Of course, how the continents looks 100 million years from now will be very different than today.
1) Three masses hang about a 3 meter stick whose fulcrum is at
50cm. A mass of m1=60.0 kg hangs at the 90.0 cm mark, m2= 20.0 kg hangs at the 20.0 cm mark. Find the location of the mass, m3= 10 kg to obtain static equilibrium. If it is not possible to reach equilibrium, then select a new pivot point and draw a new diagram that will allow the system to reach static equilibrium with the same lever arms values as before for all masses.
The mass m3 should be placed 0.8 m away from the fulcrum to achieve static equilibrium.
Static equilibriumTo achieve static equilibrium, the net torque acting on the system must be zero. The torque is given by the product of the force and the lever arm. Taking the fulcrum as the reference point, we can write:
(m1)(g)(0.9 m - 0.5 m) + (m2)(g)(0.2 m - 0.5 m) + (m3)(g)(x - 0.5 m) = 0
where g is the acceleration due to gravity (9.81 m/s^2) and x is the distance of the mass m3 from the fulcrum.
Simplifying and solving for x, we get:
x = [(m1)(0.9 m - 0.5 m) + (m2)(0.2 m - 0.5 m)] / (m3) + 0.5 m
x = [((60.0 kg)(0.4 m) + (20.0 kg)(-0.3 m))] / (10.0 kg) + 0.5 m
x = 0.8 m
Therefore, the mass m3 should be placed 0.8 m away from the fulcrum to achieve static equilibrium.
More on torque can be found here: https://brainly.com/question/30807709
#SPJ1
The graph shows how the speed of a car travelling in a straight line changes with time. Which section shows the largest acceleration? speed A B C D time
The section that shows the largest acceleration on the graph would be section B, as it has the steepest slope.
This indicates that the car is increasing in speed at a faster rate during this section compared to the other sections.
For more such question on acceleration
https://brainly.com/question/460763
#SPJ11
complete question not found in search engine.
what happens according to newton if you let an untide ballon go?
Which word best completes the analogy?
Health-related fitness is to health as skill-related fitness is to _____.
A.
exercise
B.
wellness
C.
performance
D.
fitness
The word that best completes the analogy Health-related fitness is to health as skill-related fitness is to is option C which is performance.
Performance explained.
In health and fitness, performance refers to an individual's ability to carry out physical activities or exercises with efficiency and effectiveness, which are key components of skill-related fitness. Good performance in health and fitness can be measured by various parameters, such as strength, endurance, flexibility, balance, coordination, and speed. For example, a good performance in running can be measured by the ability to run a certain distance in a shorter time or maintaining a specific pace for a longer time. Similarly, a good performance in weightlifting can be measured by the ability to lift a certain weight with proper form and technique.
In general, good performance in health and fitness is associated with better overall physical health, reduced risk of chronic diseases, and improved quality of life.
Learn more about performance below.
https://brainly.com/question/27943755
#SPJ1
Review the ray tracing provided.
A thin lens is located centered over a 14 cm ruler at the 7 cm mark. A black dot is located at 5.5 cm on the left side of the lens and at 8.5 cm on the right side of the lens. An arrow is located at the 6 cm mark. Rays appear to go from the head of the arrow towards the lens, and then extend backwards to the tip of an arrow located at 4 cm.
Which of the following best describes the image?
Inverted, smaller, and real
Upright, smaller, and virtual
Upright, larger, and real
Upright, larger, and virtual
The best description of the image is (B) upright, smaller, and virtual is correct option.
To determine the characteristics of the image, we can use the thin lens equation:
1/f = 1/do + 1/di
where f is the focal length of the lens, do is the object distance (distance of the object from the lens), and di is the image distance (distance of the image from the lens).
We can also use the magnification equation:
m = -di/do
where m is the magnification.
First, we need to determine the focal length of the lens. We can use the fact that the lens is centered over the 14 cm ruler at the 7 cm mark, which means the lens is 7 cm from both the left and right sides of the ruler. Since the ruler has a total length of 14 cm, the lens must be in the middle, and the distance from the lens to the ruler is 7 cm. Therefore, the lens has a focal length of 7 cm.
Next, we can use the thin lens equation to find the image distance for the arrow located at the 6 cm mark:
1/7 = 1/(6 - 7) + 1/di
di = -7 cm
The negative sign indicates that the image is inverted.
We can also use the magnification equation to find the magnification of the image:
m = -di/do = -(-7)/(-6) = 7/6
The positive magnification indicates that the image is upright.
Finally, we can use the image distance and magnification to determine the characteristics of the image. Since the image distance is negative, the image is virtual. Since the magnification is less than 1, the image is smaller.
Therefore, the best description of the image is upright, smaller, and virtual.
To know more about image
https://brainly.com/question/12494813
#SPJ1
Answer:
upright, smaller virtual
Explanation:
Four point masses 2kg, 4kg, 6kg and 8kg are placed at the corners of Square ABCD of 2cm long respectively. Find the Position of centre of mass of the system from the corner A.
please help me I give you 50 coins
1. Choose one from the following countries:
o United States
o United Kingdom
o Australia
o Nepal
o Russia
o Spain
o India
2. Then make research of some laws supporting sexuality and gender in your
chosen country.
uk
because they have a Sexuality law
graph
shows a variety of moving objects and how their distance is related to time what do these objects have in common
What is common among all the graphs is that they all show an object that is moving.
What is a graph?In the distance time graph, we have the distance on the vertical axis and we have the time on the horizontal axis and the shape of the plots may differ depending on the nature of the motion of the objects.
Graphs of distance vs time help us to examine motion by showing how an object has moved over time. All objects shown on a distance vs. time graph are shifting positions over time, regardless of the graph's specific shape or slope, and the graph reveals information about the direction and speed of their motion.
Learn more about graphs:https://brainly.com/question/848468
#SPJ1
The pressure difference between two locations is 0.005 Torr .Which one of the following barometers is preferred to measure the small pressures accurately? (knowing that: Density of mercury = 13600 kg/m³, density water = 1000 kg/m³, density of oil = 800 kg/m³
A-Mercuric barometer
B-Oil-water barometer
C-Water barometer
D-Oil barometer
Due to its high density, the mercury barometer is the greatest option for precisely measuring minor changes in pressure. The correct option is A.
A barometer is an instrument used to measure atmospheric pressure. It typically consists of a long glass tube filled with a liquid, usually mercury, and inverted in a container of the same liquid.
The preferred barometer to measure small pressures accurately would be the mercury barometer (option A), because it has a higher density compared to the other options and hence it can detect smaller changes in pressure.
To see why the other options are not as good for measuring small pressures accurately, we can compare their densities:
Oil-water barometer: The density of oil is lower than the density of mercury, so it would not be as accurate for measuring small changes in pressure.
Water barometer: The density of water is much lower than the density of mercury, so it would not be as accurate for measuring small changes in pressure.
Oil barometer: The density of oil is lower than the density of mercury, so it would not be as accurate for measuring small changes in pressure.
Therefore, option A, the mercury barometer, is the best choice for measuring small changes in pressure accurately due to its high density.
To learn more about the manometer click:
https://brainly.com/question/31073562
#SPJ1
dx=7.14 m and dy=-7.55 m find the direction
Explanation:
arctan ( -7.55/7.14) = - 46.6 degrees ( or 313.4 degrees)
A rocket is fired from the earth to the moon at a speed of 0.930c. Let two events be "rocket leaves earth" and "rocket hits moon"
A. In the earth's reference frame, calculate Δx for these events.
B. In the earth's reference frame, calculate Δt for these events.
C. In the earth's reference frame, calculate the spacetime interval s for these events.
D. In the earth's reference frame, calculate Δx' for these events.
E. In the earth's reference frame, calculate Δt' for these events.
F. In the earth's reference frame, calculate the spacetime interval s' for these events.
G. In the earth's reference frame, calculate Δx if a rocket is replaced with a laser beam.
H. In the earth's reference frame, calculate Δt if a rocket is replaced with a laser beam.
I. In the earth's reference frame, calculate the spacetime interval s if a rocket is replaced with a laser beam.
Express ALL parts with appropriate units
A. Δx = 384,400 km (distance between Earth and Moon)
How to solveB. Δt = 384,400 km / (0.930 * 299,792 km/s) ≈ 1.421 s
C. s² ≈ (-2.781 * 10^10) km² (imaginary number, time-like separated events)
D, E, F. Cannot answer without specified primed frame.
G. Δx for laser beam = 384,400 km
H. Δt for laser beam = 384,400 km / 299,792 km/s ≈ 1.282 s
I. s² for laser beam ≈ 0 km² (light-like separated events)
Read more about velocity here:
https://brainly.com/question/25905661
#SPJ1
In a parallel circuit, the current amplitude is the same through the inductor branch, the capacitor branch, and the resisitor branch. For this circuit, L =
20.0 mH and C = 10.0 mF.
a. What is the source angular frequency?
b. What is the resistance of the resistor?
part a.
The source angular frequency is 2.23 rad/s.
part b.
The resistance of the resistor is 4.46 Ω.
How do we calculate?The source angular frequency is given as:
ω = 1/√(LC)
where = is the inductance,
C = capacitance,
ω= angular frequency.
Substituting the values, we have:
ω = 1/√(20.0 mH x 10.0 mF) = 1/√(0.2) = 1/0.447 = 2.23 rad/s
part b.
We use the impedance in a parallel RLC circuit:
Z = R/(1 - ω^2LC)
impedance of the inductor branch is given as:
Z = jωL
impedance of the capacitor branch :
Z = -j/(ωC)
impedance of the resistor branch :
Z = R
We set all the impedances together at:
jωL = -j/(ωC) = R
We now solve for
R = ωL/ωC
R = = (2.23 rad/s)(20.0 mH)/(10.0 mF)(2.23 rad/s)
R = 4.46 Ω
Learn more about impedances at:
https://brainly.com/question/24225360
#SPJ1
Please answer the correct question and I will give you 50 points
1) Consider a ring, sphere and solid cyclinder all with the same mass. They are all held at the top of an inclined plane which is at 20° to the horizontal. The top of the inclined plane is 1 m high. The shapes are released simultaneously and allowed to roll down the inclined plane. Assume the objects roll without slipping and that they are all made from the same material. Assume the coefficient of static friction between the objects and plane to be 0.3.
A ) calculate the tangential (linear) Velocity of each shapes-
B) determine the linear acceleration(a)
C) which shapes have the greater moment of inertia ?
D) How long will it take each shape to reach the bottom of the Slope ?
E) workout what order they would get to the bottom of the Slope.
A) The tangential (linear) velocity of each shape is:
For the ring: v = rω = 2.41 m/s.
For the sphere: v = rω = 1.57 m/s.
For the solid cylinder: v = rω = 2.41 m/s.
B) The linear acceleration of each shape is:
For the ring: α = 2gsinθ/(3r(1 + 0.3) + 2R) = 1.191 m/s^2.
For the sphere: α = 2gsinθ/(5r(1 + 0.3)) = 1.176 m/s^2.
For the solid cylinder: α = 2gsinθ/(3r(1 + 0.3) + 2R) = 1.228 m/s^2.
C) The solid cylinder has the greatest moment of inertia.
D) The time taken for each shape to reach the bottom of the slope is:
For the ring: t = 0.576 s.
For the sphere: t = 0.197 s.
For the solid cylinder: t = 0.576 s.
E) The sphere will reach the bottom of the slope first, followed by the ring and the solid cylinder.
Question 11 of 25
In the circuit below, resistors R₁ and R₂ are in parallel. What is the equivalent
1
1
resistance? (R₁ = 30 22,R₂ = 20 2) (
A
+A)
Ptot R₁
S₁
S₂
R₁
S₂ S
ww
R₂
1
R₂₂k
Answer:
60 ohms
Explanation:
To find the equivalent resistance of two resistors R₁ and R₂ in parallel, we can use the formula:
1/Req = 1/R₁ + 1/R₂
where Req is the equivalent resistance.
Substituting the values given, we get:
1/Req = 1/30 + 1/20
Simplifying, we get:
1/Req = 1/60
Multiplying both sides by Req, we get:
Req = 60 ohms
Therefore, the equivalent resistance of the two resistors R₁ and R₂ in parallel is 60 ohms.
what is the unit of time not based on a heavenly body
Which of the following statements regarding VDGS
Systems are true? (Select ALL that are true.)
You can guess what type of aircraft is being parked.
If the system stops the aircraft, you can just manually continue to park it.
You do not need to investigate the reason for the stop.
Anyone can give the "Stop" signal if a threat to the safety of the aircraft is
observed.
You must power on and check the system before arrival.
A qualified agent must man the Emergency stop.
The true statements regarding VDGS Systems are you must power on and check the system before arrival and a qualified agent must man the Emergency stop.
What is VDGS?VDGS stands for Visual Docking Guidance System. It is a technology used in airports to assist pilots in parking their aircraft at the gate by providing visual cues and guidance through the use of lights and/or displays.
The following statements regarding VDGS Systems are true:
You must power on and check the system before arrival.A qualified agent must man the Emergency stop.Learn more on VDGS here https://brainly.com/question/26507705
#SPJ1
Suppose 10.0 g of ice at -10.0C is placed into 300.0 g of water in a 200.0-g copper calorimeter. The final temperature of the water and copper calorimeter is 18.0C.
1) What was the initial common temperature of the water and copper? (Express your answer to three significant figures.)
The initial common temperature of the water and copper is approximately 2.68°C.
To find the hidden typical temperature of the water and copper, we need to use the norm of protection of energy, which communicates that energy can't be made or obliterated, recently moved or changed beginning with one design then onto the following.
The force lost by the ice as it breaks up is identical to the power obtained by the water and the calorimeter. We can impart this using the recipe:
Q_ice = Q_water + Q_calorimeter
where Q_ice is the force lost by the ice, Q_water is the power procured by the water, and Q_calorimeter is the force gained by the calorimeter.
We can determine the power lost by the ice using the recipe:
Q_ice = m_ice * L_f
where m_ice is the mass of the ice and L_f is the force of blend of water, which is 333 J/g.
Q_ice = (10.0 g) * (333 J/g) = 3330 J
We can sort out the force obtained by the water using the condition:
Q_water = m_water * c * (T_f - T_i)
where m_water is the mass of the water, c is the specific power breaking point of water, which is 4.184 J/g°C, T_f is the last temperature of the water and calorimeter, and T_i is the hidden ordinary temperature of the water and calorimeter.
Q_water = (300.0 g) * (4.184 J/g°C) * (18.0°C - T_i)
We can figure the force obtained by the calorimeter using the recipe:
Q_calorimeter = m_calorimeter * c_calorimeter * (T_f - T_i)
where m_calorimeter is the mass of the calorimeter, which is 200.0 g, c_calorimeter is the specific force breaking point of copper, which is 0.385 J/g°C, T_f is the last temperature of the water and calorimeter, and T_i is the hidden ordinary temperature of the water and calorimeter.
Q_calorimeter = (200.0 g) * (0.385 J/g°C) * (18.0°C - T_i)
Subbing these circumstances into the norm of conservation of energy, we get:
m_ice * L_f = m_water * c * (T_f - T_i) + m_calorimeter * c_calorimeter * (T_f - T_i)
Tending to for T_i, we get:
T_i = T_f - [(m_ice * L_f)/(m_water * c + m_calorimeter * c_calorimeter)]
T_i = 18.0°C - [(10.0 g) * (333 J/g)/(300.0 g * 4.184 J/g°C + 200.0 g * 0.385 J/g°C)]
T_i = 2.68°C
As needs be, the basic ordinary temperature of the water and copper was 2.68°C (conveyed to three immense figures).
To learn more about temperature, refer:
https://brainly.com/question/31909880
#SPJ1
Before taking a personality test, Jackie sets her mind on growth. How might this affect her understanding of the test?
Choose two anSwers-
1.She will score high in the areas she chooses to.
2.She will respond based on what's best in her desired career path.
3. She will think of the results as an opportunity to find joy.
4. She will identify areas for self- development in her results.
Answer:
The two answers that are likely to be true are:
She will think of the results as an opportunity to find joy.
She will identify areas for self-development in her results.
By setting her mind on growth, Jackie is likely to approach the personality test with a positive and open mindset. This can lead to the following outcomes:
She will think of the results as an opportunity to find joy: Jackie may view the test results as a chance to discover aspects of her personality that bring her joy and satisfaction. She might focus on finding strengths and positive qualities that can contribute to her personal and professional growth.
She will identify areas for self-development in her results: Rather than viewing the test results as fixed labels or limitations, Jackie is likely to see them as valuable feedback for self-improvement. She may actively seek out areas where she can further develop her skills, knowledge, and personality traits to enhance her personal and career growth.
It's important to note that the other options listed in the question (1. She will score high in the areas she chooses to and 2. She will respond based on what's best in her desired career path) are not directly related to having a growth mindset. They suggest a more biased or strategic approach to the test, which may not align with the concept of growth and self-improvement.