Answer:
2.1x10^6m/s
Explanation:
One electron has a charge of –1.602e-19 C
mass of electron is 9.1e-31 kg
mass of proton is 1.6726e−27 kg
mass ratio is 1.6726e−27 / 9.1e-31 = 1838
The force is constant, F
distance is constant, d
a = F/m
a increases by a factor 1838, as m decreases by that factor
a = a₀1838
v₀² = 2a₀d
v² = 2a₀d1838
v²/v₀² = 2a₀d1838 / 2a₀d = 1838
v² = 1838v₀² = 1838(45000)²
v = 45000√1838 = 2.1e6 m/s
A helicopter blade starts to rotate from rest with a constant angular acceleration of \alpha=\:α = 0.98 radians/second2. How many revolutions will the blade make before it is rotating at 500 revolutions per minute (RPM)?
Answer:
n = 223 revolutions
Explanation:
It is given that,
The angular acceleration of a helicopter blade, [tex]\alpha =0.98\ rad/s^2[/tex]
Initial speed of the helicopter blade, [tex]\omega_i=0[/tex]
The final speed of the blade, [tex]\omega_f=500\ rpm=500\times \dfrac{2\pi}{60}\ rad/s=52.35\ rad/s[/tex]
We need to find the number of revolutions. Firstly we will find the angle turned by the blade. Let the angle is [tex]\theta[/tex]. So,
[tex]\omega_f^2-\omega_i^2=2\alpha \theta[/tex]
[tex]\theta=\dfrac{\omega_f^2}{2\alpha}[/tex]
[tex]\theta=1398.22\ rad [/tex]
Let there are n number of revolutions made by the blade. So,
[tex]n=\dfrac{\theta}{2\pi}\\\\n=\dfrac{1398.22}{2\pi}\\\\n=222.53\ rev[/tex]
or
n = 223 rev
So, there are 223 revolutions.
Suppose you are looking into the end of a long cylindrical tube in which there is a uniform magnetic field pointing away from you. If the magnitude of the field is decreasing with time the direction of the induced magnetic field is
Answer:
If the magnitude of the field is decreasing with time the direction of the induced magnetic field is CLOCKWISE
Explanation
This is because If the magnetic field decreases with time, the electric field will be produced in order to oppose the change in line with lenz law. Thus The right hand rule can be applied to find that the direction of electric field is in the clockwise direction.
The unit of current, the ampere, is defined in terms of the force between currents. Two 1.0-meter-long sections of very long wires a distance 1.5 m apart each carry a current of 1.0 A.
Required:
What is the force between them
Answer:
[tex]1.33\times 10^{-8} N[/tex]
Explanation:
According to the given scenario, the computation of force between them is shown below:-
As we know that
[tex]\mu = 4\pi\times 10^{-7}[/tex]
The force between two current carrying wires will be
[tex]F = \frac{\mu_oI_1I_2L}{2\pi r}[/tex]
[tex]= \frac{4\pi\times 10^{-7} (1 A) (1 A) (1.0 m)}{2\pi (1.5m)}[/tex]
[tex]= 1.33\times 10^{-7} N[/tex]
[tex]= 1.33\times 10^{-8} N[/tex]
Therefore for computing the force between two wires we simply applied the above formula.
So, the force between two wires carrying 1 A current [tex]= 1.33\times 10^{-8} N[/tex].
A car is moving along a road at 28.0 m/s with an engine that exerts a force of
2,300.0 N on the car to balance the drag and friction so that the car maintains a
constant speed. What is the power output of the engine?
Answer:
Power = Force × Distance/time
Power = Force × Velocity
Power = 2,300.0 N × 28.0 m/s²
Power = 64400 Nm/s
Explanation:
First show the formula of Power
Re-arrange formula and used to work out Power
Pretty simple stuff!
Hope this Helps!!
A proton moving at 4.80 106 m/s through a magnetic field of magnitude 1.74 T experiences a magnetic force of magnitude 7.00 10-13 N. What is the angle between the proton's velocity and the field? (Enter both possible answers from smallest to largest. Enter only positive values between 0 and 360.)
Answer:
31.55° and 148.45°
Explanation:
Formula for calculating the force experiences by the proton placed in a magnetic field is as expressed below;
F = qvBsinθ where;
F is the magnetic force experienced by the proton
q is the charge on the proton
v is the velocity of the proton
B is the magnetic field
θ is the angle between the proton's velocity and the field (Required)
Given parameters
F = 7.00 * 10⁻¹³N
q = 1.602*10⁻¹⁹C
v = 4.80 * 10⁶ m/s
B = 1.74 T
θ =?
From the formula F = qvBsinθ;
sinθ = F/qvB
sinθ = 7.00 * 10⁻¹³/1.602*10⁻¹⁹* 4.80 * 10⁶*1.74
sinθ = 7.00 * 10⁻¹³/13.38*10⁻¹³
sinθ = 0.5231689 * 10⁰
sinθ = 0.5231689
θ = sin⁻¹0.5231689
θ = 31.55°
The following are the positive values of the angle between 0° and 360°
Sin is positive in the first and second quadrant. In the second quadrant the angle is equal to 180°-31.55° = 148.45°.
Hence the possible values of the angle from smallest to largest are 31.55° and 148.45°
"Pipe A has length L and is open at one end and closed at the other. Pipe B is open at both ends and has length 2L. Which harmonic of pipe B matches in frequency the fundamental of pipe A?"
Answer:
Explanation:
length of pipe A is L
frequency of fundamental note of pipe A which is closed organ pipe
= velocity of sound / 4 x length of pipe
= V / 4 x L where V is velocity of sound .
Similarly frequency of fundamental note of pipe B which is open organ pipe
= velocity of sound / 2 x length of pipe
= V / (2 x 2L) = V / 4L , This is also called first harmonic
so fundamental frequency of pipe A will be equal to first harmonic of pipe B .
Red light is bent the least of all colors as it passes through a prism. What does this tell you about red light? It has a short wavelength. It has a long wavelength. It has a high intensity. It has a low intensity.
Answer:
Longest wavelength, lowest intensity
Explanation:
Answer:
It has a long wavelength
Explanation:
GRADPOINT
a uniform rod of 30cm is pivoted at its center.a 40N weight is hung 5cm from left.from where 50N weight be hung to maintain equilibrium?
Answer:
The 50N weight be hung at 23 cm to maintain equilibrium
Explanation:
Given;
length of the uniform rod = 30 cm
center of the uniform rod = 15 cm
weight of 40N is hung at 5 cm mark
weight of 50 N will be hung at ?
0------5cm-----------------15cm-------------P---------30cm
↓ 10cm Δ xcm ↓
40N 50N
Take moment about the pivot point and apply the principle of moment
50N (x cm) = 40N (10 cm)
x = (400) / 50
x = 8cm
P = x cm + 15 cm
P = 8 cm + 15 cm
P = 23 cm
Therefore, the 50N weight be hung at 23 cm to maintain equilibrium
A person can survive a feet-first impact at a speed of about 12 m/s (27 mi/h) on concrete, 15 m/s (34 mi/h) on soil, and 34 m/s (76 mi/h) on water. What is the reason for the different values for different surfaces
Answer:
Different surfaces have different impact force during collision which depends on the time it takes the person to come to rest after collision.
Explanation:
Given;
speed on concrete = 12 m/s (27 mi/h)
speed on soil = 15 m/s (34 mi/h)
speed on water = 34 m/s (76 mi/h)
The impact force on this person during collision is rate of change of momentum;
[tex]F = \frac{\delta P}{\delta t}[/tex]
During collision, the force exerted on this person depends on how long the collision lasts; that is, how long it takes for this person to come to rest after collision with each of the surfaces.
The longer the time of collision, the smaller the force exerted by each.
It takes shorter time for the person to come to rest on concrete surface than on soil surface, also it takes shorter time for the person to come to rest on soil surface than on water surface.
As a result of the reason above, the force exerted on the person during collision by the concrete surface is greater than that of soil surface which is greater than that of water surface.
In a polar coordinate system, the velocity vector can be written as . The term theta with dot on top is called _______________________ angular velocity transverse velocity radial velocity angular acceleration
Answer:
I believe it's called rapid growth
Explanation:
that is my answer no matter what
A skater spins at 3rev/s when she stretches her arms outward. If she keeps her fists on her chest she can spin at 4.5rev/s and her body inertia is 3kg.m2. What is her body inertia when she stretches her arms outward?
Answer:
Body inertia I = 4.5 kg/m^2
Explanation:
Here, we want to calculate the body inertia when the arms are stretched outwards.
We know from the question that angular momentum is conserved
Thus;
I * 3 = 4.5 * 3
I = 4.5 kg/m^2
Determine the position in the oscillation where an object in simple harmonic motion: (Be very specific, and give some reasoning to your answer.) has the greatest speed has the greatest acceleration experiences the greatest restoring force experiences zero restoring force g
Answer:
Explanation:
The greatest speed is attained at middle point or equilibrium point or where displacement from equilibrium point is zero .
When the object remains at one of the extreme point it experiences greatest acceleration but at that point velocity is zero . Due to acceleration , its velocity goes on increasing till it come to equilibrium point . At this point acceleration becomes zero . After that its velocity starts decreasing because of negative acceleration . Hence at middle point velocity is maximum .
The greatest acceleration is attained at maximum displacement or at one of the two extreme end .
Greatest restoring force too will be at position where acceleration is maximum because acceleration is produced by restoring force .
Restoring force is proportional to displacement or extension against restoring force . So it will be maximum when displacement is maximum .
Zero restoring force exists at equilibrium position or middle point or at point where displacement is zero . It is so because acceleration at that point is zero .
Help me with these question and please explainnn
Explanation:
1. Impulse = change in momentum
J = Δp
J = mΔv
In the x direction:
Jₓ = mΔvₓ
Jₓ = (0.40 kg) (30 m/s cos 45° − (-20 m/s))
Jₓ = 16.5 kg m/s
In the y direction:
Jᵧ = mΔvᵧ
Jᵧ = (0.40 kg) (30 m/s sin 45° − 0 m/s)
Jᵧ = 8.49 kg m/s
The magnitude of the impulse is:
J = √(Jₓ² + Jᵧ²)
J = 18.5 kg m/s
The average force is:
FΔt = J
F = J/Δt
F = 1850 N
2. Momentum is conserved.
m₁u₁ + m₂u₂ = (m₁ + m₂) v
In the x direction:
(1000 kg) (0 m/s) + (1500 kg) (-12 m/s) = (1000 kg + 1500 kg) vₓ
vₓ = -7.2 m/s
In the y direction:
(1000 kg) (20 m/s) + (1500 kg) (0 m/s) = (1000 kg + 1500 kg) vᵧ
vᵧ = 8 m/s
The magnitude of the final speed is:
v = √(vₓ² + vᵧ²)
v = 10.8 m/s
3. Momentum is conserved.
m₁u₁ + m₂u₂ = (m₁ + m₂) v
In the x direction:
(0.8 kg) (18 m/s cos 45°) + (0.36 kg) (9.0 m/s) = (0.8 kg + 0.36 kg) vₓ
vₓ = 11.6 m/s
In the y direction:
(0.8 kg) (-18 m/s sin 45°) + (0.36 kg) (0 m/s) = (0.8 kg + 0.36 kg) vᵧ
vᵧ = -8.78 m/s
The magnitude of the final speed is:
v = √(vₓ² + vᵧ²)
v = 14.5 m/s
Suppose a small metal object, initially at a temperature of 40 degrees, is immersed in a room which is held at the constant temperature of 70 degrees. It takes 2 minutes for the temperature of the object to reach 55 degrees.
Required:
a. Calculate the heat transfer coefficient r , i.e. the constant of proportionality in the differential equation that describes Newton's law of cooling.
r =_________
b. Suppose now that the room temperature begins to vary; i.e. Troom(t) = 90 + sin(0.1 t) . Use Newton's law of cooling and the heat transfer coefficient you calculated in the previous step to compute the temperature of the object as a function of time. Suppose that T(0) = 70 . T(t)
a)The heat transfer coefficient will be 0.231 .The concept of the Newtons law of cooling is used in the given problem.
What is newtons law of colling?The pace at which an item cools is proportional to the temperature differential between the object and its surroundings,
According to Newton's law of cooling. Simply explained, in a cold environment, a glass of hot water will cool down faster than in a hot room.
The given data in the problem is;
T₀ is the initial temperature= 40°
[tex]\rm T_S[/tex] is the constant temperature = 70°
T is the final temperature = 55°
From the given equation the Newtons law of cooling;
[tex]\rm T=T_S+(T_0-T_S)e^{-kt} \\\\ 55=70+(40-70)e^{-3k} \\\\-30 e^{-3k}=-15\\\\ e^{-3k}= -\frac{1}{2} \\\\ ln e^[3k}=ln 2 \\\\ K=\frac{1}{3} ln2 \\\\ K=0.231[/tex]
Hence the heat transfer coefficient will be 0.231 .
To learn more about the Newtons law of cooling refer to the link;
https://brainly.com/question/14643865
You set two parallel slits 0.1 mm apart at a distance of 2 m from a screen and illuminate them with light of wavelength 450 nm. The distance between a bright spot in the interference pattern and the dark spot adjacent to it is Group of answer choices
Answer:
Δx = 9 x 10⁻³ m = 9 mm
Explanation:
The formula for fringe spacing in Young's Double Slit Experiment is given as follows:
Δx = λL/d
where,
Δx = fringe spacing = ?
λ = wavelength of light = 450 nm = 450 x 10⁻⁹ m
L = Distance between slits and screen = 2 m
d = distance between slits = 0.1 mm = 0.1 x 10⁻³ m
Therefore,
Δx = (450 x 10⁻⁹ m)(2 m)/(0.1 x 10⁻³ m)
Δx = 9 x 10⁻³ m = 9 mm
An electron initially at rest is accelerated over a distance of 0.210 m in 33.3 ns. Assuming its acceleration is constant, what voltage was used to accelerate it
Answer:
V = 451.47 volts
Explanation:
Given that,
Distance, d = 0.21 m
Initial speed, u = 0
Time, t = 33.3 ns
Let v is the final velocity. Using second equation of motion as :
[tex]d=ut+\dfrac{1}{2}at^2[/tex]
a is acceleration, [tex]a=\dfrac{v-u}{t}[/tex] and u = 0
So,
[tex]d=\dfrac{1}{2}(v-u)t[/tex]
[tex]v=\dfrac{2d}{t}\\\\v=\dfrac{2\times 0.21}{33.3\times 10^{-9}}\\\\v=1.26\times 10^7\ m/s[/tex]
Now applying the conservation of energy i.e.
[tex]\dfrac{1}{2}mv^2=qV[/tex]
V is voltage
[tex]V=\dfrac{mv^2}{2q}\\\\V=\dfrac{9.1\times 10^{-31}\times (1.26\times 10^7)^2}{2\times 1.6\times 10^{-19}}\\\\V=451.47\ V[/tex]
So, the voltage is 451.47 V.
g A particle (charge = +40 mC) is located on the x axis at the point x = -20 cm, and a second particle (charge = -50 mC) is placed on the x axis at x = +30 cm. What is the magnitude of the total electrostatic force on a third particle (charge = -4.0 mC) placed at the origin (x = 0)? Group of answer choices
Answer:
Explanation:
We shall find electric field at origin due to two given charges sitting on the either side of origin .
Total field will add up due to their same direction .
Field due to a charge Q
= 9 x 10⁹ x Q / R² ; R is distance of point , Q is charge
Field due to first charge
= 9 x 10⁹ x 40 x 10⁻³ / 2² x 10⁻⁴
= 90 x 10¹⁰ N/C
Field due to second charge
= 9 x 10⁹ x 50 x 10⁻³ / 2² x 10⁻⁴
= 112.5 x 10¹⁰ N/C
Total field
= 202.5 x 10¹⁰ N/C
Force on given charge at origin
= charge x field
= 4 x 10⁻³ x 202.5 x 10¹⁰
= 810 x 10⁷ N .
why was the observation of the double-slit interference pattern more convincing evidence for the wave theory of light than the observation of diffraction
Answer:
The double slit experiment showed for the first time that light can be interfered, producing bands of light and dark fringes on a screen. This phenomenon was a unique and typical characteristic of waves.
Explanation:
Th double slit experiment by Thomas Young proved, and sealed for the first time the wave nature of light; showing that light just as any other wave can produce interference which was a unique, typical phenomenon of waves. The Interference of light was shown by allowing light to pass through narrow slits and superimpose on a wall or screen, at a distance away from the slit, producing a clear pattern of light and dark fringes. This was the first experiment to proof that darkness can be produced by the addition of light on light. Interference is accompanied by a spatial redistribution of the optical intensity without violation of power conservation. The phenomenon of interference proved the intuitive ideas of Huygens regarding the wave nature of light against Newton's particle nature of light theory.
Three identical resistors are connected in series to a battery. If the current of 12 A flows from the battery, how much current flows through any one of the resistors
Answer:
Current that flows through any one of the resistors has a value of 12 amperes.
Explanation:
When a group of resistors are connected in series, the same current flows through each resistor. According to the Ohm's Law, the circuit can be represented as follows:
[tex]V_{batt} = i\cdot (R_{1}+R_{2}+R_{3})[/tex]
[tex]i = \frac{V_{batt}}{R_{1}+R_{2}+R_{3}}[/tex]
Where:
[tex]V_{batt}[/tex] - Voltage of the battery, measured in volts.
[tex]R_{1}[/tex], [tex]R_{2}[/tex], [tex]R_{3}[/tex] - Electric resistance of the first, second and third resistors, measured in ohms.
[tex]i[/tex] - Current, measured in amperes.
If [tex]R_{1} = R_{2} = R_{3} = R[/tex], then:
[tex]i = \frac{V_{batt}}{3\cdot R}[/tex]
Current that flows through any one of the resistors has a value of 12 amperes.
The current flows via any of the resistors should have a value of 12 amperes.
Ohm law:At the time When a group of resistors are linked in series, so there is a similar current flow via each resistor.
Here the circuit should be
vbatt = i.(R1 + R2+ R3)
i = Vbatt/R1 + R2 + R3
here
Vbatt means the voltage of the battery
R1,R2, and R3 means the resistance of the first, second and third resistors
I means the current
So, in the case when
R1 = R2 = R3 = R
So,
i = Vbatt/3.R
Learn more about current here: https://brainly.com/question/14956680
For every particle there is a corresponding ______________.
Answer:
Anti-Particle
Often in science it is helpful to talk about a representative example of the objects or phenomena being studied. However, you must always keep in mind that the average case is not always representative. For example, our Sun is often described as an "average" star in the Milky Way. In what sense is this statement true? In what sense is this statement seriously misleading? Do you think it is useful to characterize the stars in the Milky Way by simply citing our "average" Sun?
Explanation:
The statement "our sun is an 'average' sun" is true when it is used to describe or characterize some unique physical properties of stars generally in the universe. 'Average' in this sense is used to define a typical sun such as, "stars should glow like our sun an average star."
The statement is used wrongly when used to in quantifying other stars in the universe, based on calculated values from our sun. In this case, we cannot truly say if our sun is a true representative average of other stars in the universe.
Yes! it is useful to characterize the milky way by simply citing the average sun. Properties like their ability to glow and radiate heat can be defined by citing an average star like our sun, so long as we don't translate it into citing quantitative properties of the sun as an average of our Milky Way Galaxy like the mass, temperature, etc.
An inventor claims to have developed a food freezer that, in steady-state conditions, requires a power input of 0.25 kW to extract energy by heat transfer at a rate of 3050 J/s from the freezer contents, which are at a temperature of 270 K. Determine if this claim is real considering an ambient temperature of 293 K. (a) Can the freezer operation in such conditions
Answer:
The inventors claim is not real
a) No the the freezer cannot operate in such conditions
Explanation:
From the question we are told that
The power input is [tex]P_i = 0.25 kW = 0.25 *10^{3} \ W[/tex]
The rate of heat transfer [tex]J = 3050 J/s[/tex]
The temperature of the freezer content is [tex]T = 270 \ K[/tex]
The ambient temperature is [tex]T_a = 293 \ K[/tex]
Generally the coefficient of performance of a refrigerator at idea conditions is mathematically represented as
[tex]COP = \frac{T }{Ta - T}[/tex]
substituting values
[tex]COP = \frac{270 }{293 - 270}[/tex]
[tex]COP =11.7[/tex]
Generally the coefficient of performance of a refrigerator at real conditions is mathematically represented as
[tex]COP = \frac{J}{P_i}[/tex]
substituting values
[tex]COP = \frac{3050}{0.25 *10^{3}}[/tex]
[tex]COP = 12.2[/tex]
Now given that the COP of an ideal refrigerator is less that that of a real refrigerator then the claims of the inventor is rejected
This is because the there are loss in the real refrigerator cycle that are suppose to reduce the COP compared to an ideal refrigerator cycle where there no loss that will reduce the COP
Chameleons catch insects with their tongues, which they can rapidly extend to great lengths. In a typical strike, the chameleon's tongue accelerates at a remarkable 210 m/s^2 for 20 ms, then travels at constant speed for another 30 ms.
During this total time of 50 ms, 1/20 of a second, how far does the tongue reach?
Express your answer to two significant figures and include the appropriate units.
Answer:
x_total = 0.17m
Explanation:
We can treat this exercise with the kinematics equations, where in the first part it is accelerated and in the second it is a uniform movement.
Let's analyze accelerated motion
The time that lasts is t = 20 10⁻³ s, the initial speed is zero (v₀ = 0), let's find the length that advances
x₁ = v₀ t + ½ a t²
x₁ = ½ a t²
x₁ = ½ 210 (20 10⁻³)²
x₁ = 4.2 10⁻² m
let's find the speed for the end of this movement
v = v₀ + a t
v = 0 + 210 20 10⁻³
v = 4.2 m / s
with this speed we can find the distance that the uniform movement
x₂ = v t2
x₂ = 4.2 30 10⁻³
x₂ = 1.26 10⁻¹ m
x₂ = 0.126m
the total distance traveled is
x_total = x₁ + x₂
x_total = 0.0420 +0.126
x_total = 0.168m
Let's reduce the significant figures to two
x_total = 0.17m
A skateboarder jumps horizontally off the top of a staircase and lands at bottom of the stairs. The staircase has a horizontal length of 12.0 m, and the jump lasts 1.10s. We can ignore air resistance. What is the skater's vertical velocity upon landing? Round your answer to three significant digits.
Answer:
The vertical velocity of the skater upon landing is 10.788 meters per second.
Explanation:
Skateboarder experiments a parabolic movement. As skateboarder jumps horizontally off the top of the staircase, it means that vertical component of initial velocity is zero and accelerates by gravity, the final vertical speed is calculated by the following expression:
[tex]v = v_{o} + g\cdot t[/tex]
Where:
[tex]v_{o}[/tex] - Initial vertical speed, measured in meters per second.
[tex]v[/tex] - Final vertical speed, measured in meters per second.
[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.
[tex]t[/tex] - Time, measured in seconds.
Given that [tex]v_{o} = 0\,\frac{m}{s}[/tex], [tex]g = -9.807\,\frac{m}{s^{2}}[/tex] and [tex]t = 1.10\,s[/tex], the final velocity of the skater upon landing is:
[tex]v = 0\,\frac{m}{s} + \left(-9.807\,\frac{m}{s^{2}} \right)\cdot (1.10\,s)[/tex]
[tex]v = -10.788\,\frac{m}{s}[/tex]
The vertical velocity of the skater upon landing is 10.788 meters per second.
Answer:
-10.8
Explanation:
Answer on Khan Academy
A square coil of wire with side 8.0 cm and 50 turns sits in a uniform magnetic field that is perpendicular to the plane of the coil. The coil is pulled quickly out of the magnetic field in 0.2 s. If the resistance of the coil is 15 ohm and a current of 12 mA is induced in the coil, calculate the value of the magnetic field.
Answer:
Explanation:
area of the coil A = .08 x .08 = 64 x 10⁻⁴ m ²
flux through the coil Φ = area of coil x no of turns x magnetic field
= 64 x 10⁻⁴ x 50 x B where B is magnetic field
emf induced = dΦ / dt = ( 64 x 10⁻⁴ x 50 x B - 0 ) / .2
= 1.6 B
current induced = emf induced / resistance
12 x 10⁻³ = 1.6 B / 15
B = 112.5 x 10⁻³ T .
Sally who weighs 450 N, stands on a skate board while roger pushes it forward 13.0 m at constant velocity on a level straight street. He applies a constant 100 N force.
Work done on the skateboard
a. Rodger Work= 0J
b. Rodger work= 1300J
c. sally work= 1300J
d. sally work= 5850J
e. rodger work= 5850J
Answer:
b. Rodger work = 1300 J
Explanation:
Work done: This can be defined as the product of force and distance along the direction of the force.
From the question,
Work is done by Rodger using a force of 100 N in pushing the skateboard through a distance of 13.0 m.
W = F×d............. Equation 1
Where W = work done, F = force, d = distance.
Given: F = 100 N, d = 13 m
Substitute these values into equation 1
W = 100(13)
W = 1300 J.
Hence the right option is b. Rodger work = 1300 J
A 800 kg safe is 2.1 m above a heavy-duty spring when the rope holding the safe breaks. The safe hits the spring and compresses it 46 cm. What is the spring constant of the spring?
Answer:
k = 17043.5 N/m = 17.04 KN/m
Explanation:
First we need to find the force applied by safe pn the spring:
F = Weight of Safe
F = mg
where,
F = Force Applied by the safe on the spring = ?
m = mass of safe = 800 kg
g = 9.8 m/s²
Therefore,
F = (800 kg)(9.8 m/s²)
F = 7840 N
Now, using Hooke's Law:
F = kΔx
where,
K = Spring Constant = ?
Δx = compression = 46 cm = 0.46 m
Therefore,
7840 N = k (0.46 m)
k = 7840 N/0.46 m
k = 17043.5 N/m = 17.04 KN/m
The 2-Mg truck is traveling at 15 m/s when the brakes on all its wheels are applied, causing it to skid for 10 m before coming to rest. The total mass of the boat and trailer is 1 Mg. Determine the constant horizontal force developed in the coupling C, and the friction force developed between the tires of the truck and the road during this time.
Answer:
constant horizontal force developed in the coupling C = 11.25KN
the friction force developed between the tires of the truck and the road during this time is 33.75KN
Explanation:
See attached file
The friction force between the tires of the truck and the road is 22500 N.
Calculating the friction force:It is given that a 2 Mg truck ( m = 2000 Kg) is initially moving with a speed of u = 15 m/s.
Distance traveled before coming to rest, s = 10m
The final velocity of the truck will be zero, v = 0
When the breaks are applied, only the frictional force is acting on the truck and it is opposite to the motion of the truck.
The frictional force is given by:
f = -ma
the acceleration of the truck = -a
The negative sign indicates that the acceleration is opposite to the motion.
Applying the third equation of motion we get:
v² = u² -2as
0 = 15² - 2×a×10
225 = 20a
a = 11.25 m/s²
So the magnitude of frictional force is:
f = ma = 2000 × 11.25 N
f = 22500 N
Learn more about friction force:
https://brainly.com/question/1714663?referrer=searchResults
An unknown additional charge q3q3q_3 is now placed at point B, located at coordinates (0 mm, 15.0 mm ). Find the magnitude and sign of q3q3q_3 needed to make the total electric field at point A equal to zero.
Answer:
0.3nanocouloumb
Explanation:
Pls see attached file
A rectangular block of metal of resistivity rho has dimensions d x 2d x 3d . A potential difference V is to be applied between two opposite faces of the block.
(A) To which two faces of the block should the potential difference be applied to give the maximum current density?
(B) What is the maximum current density j(subscript max) from part A?
(C) To which two faces of the block should the potential difference be applied to give the maximum current?
1. to the faces that area a distance d apart
2. to the faces that are a distance 2d apart
3. to the faces that are a distance 3d apart
Answer:
a) The potential difference should be applied to the d dimension face.
b) The maximum current density j = V/3ρd
c) 3. to the faces that are a distance 3d apart
Explanation:
a) Current density is the ratio of current flowing through a conductor, and cross-sectional area of the conductor. mathematically, it is written as
j = I/A
where I is the electric current, and
A is the area of the conductor.
From the equation, we can see that reducing the area of the conductor will increase the current density for a given amount of current passing through the conductor. The face d wide will give the least cross-sectional area of current flow.
b) current density can be gotten from
j = σE ....equ 1
where σ is the conductivity of the conductor which is the inverse of resistivity ρ. this means that
σ = 1/ρ ....equ 2
where ρ is the resistivity of the conductor
E is the electric field and is the volt through the conductor per unit length of the conductor
in this case, the maximum current density will be when the length is length 3d, and the volt is the potential difference V
therefore,
E = V/3d ....equ 3
substituting equ 2 and equ 3 in equ1, we'll have
the maximum current density j = V/3ρd
c) To get the maximum current, the potential difference should be applied to the faces that are 3d wide apart because the resistance of a conductor varies inversely as the cross-sectional area. The maximum current will be gotten when the resistance is at its minimum, and the minimum resistance will be gotten with the most cross-sectional area. The 3d wide face will give the maximum cross-sectional area.