a professional football player kicks a football eith an initial velociry v= (6.0 m/s) x + (20.0 m/s) y determine how long the football stays in yhe air as well as the horizontal displacement

The area of the bone is 0.785 m². Then the maximum force that can be exerted on the femur bone if the shear stress is 9 × 10⁷ N/m² is 70650 kN.

The Young's modulus of a material is the ratio of its stress to strain. Where stress is the force per unit area and strain be the ratio of change in length to the original length.

given stress s = 9 × 10⁷ N/m²

diameter of the bone d = 9 cm = 0.09 m.

then area = π d²/4

a = 3.14 × (0.09 m )²/4 = 0.785 m².

Stress = maximum force/area

then Fmax  = stress × area

Fmax = 9 × 10⁷ N/m²  × 0.785 m²

         = 70650 kN.

Therefore, the maximum force that can be exerted to the bone is 70650 kN.

Find more on shear stress:

https://brainly.com/question/23270001

#SPJ1

To answer the question we have, 1.93401 J of energy is lost when the puck travels over the uneven surface.

Energy is referred to by scientists as the capacity for work. People have figured out how to transform energy from one kind to the other before employing it to accomplish tasks, making western civilisation possible.

Hockey weighs 0.171 kg.

Starting speed: 5.65 m/s

Ultimately, the speed was 3.05 m/s.

We must determine how much kinetic energy was lost on the tough patch.

[tex]E_{d}=\frac{1}{2} v^2_{2} -v^2_1[/tex]

Where, m = mass

v₁ = Initial velocity

v₂ = Final velocity

Put the value into the formula

[tex]E_{d}=\frac{1}{2}[/tex] × 0.171 × [tex](3.05^2 - 5.65^2)[/tex]

=  1.93401 J energy is dissipated as the puck slides over the rough patch.

To know more about Energy visit :

https://brainly.com/question/13105619

#SPJ1

If a 40 N block is resting on a rough horizontal table with a coefficient of static friction is 12 N.

Static friction is a force that resists the motion of two objects that are in contact with each other. It is caused by the forces of attraction between the two objects and is usually greater than the force of kinetic friction. The forces of static friction oppose the movement of the two objects and can be overcome by applying a force greater than the static friction.

The maximum force the block can withstand before it starts to move is 40 N multiplied by the coefficient of static friction.

The coefficient of static friction between the block and the table is determined by the materials of the block and the table and the surface roughness of the table.

If the coefficient of static friction is 0.3, then the maximum force the block can withstand before it starts to move is 40 N × 0.3 = 12 N.

To learn more about static friction

https://brainly.com/question/22696010

#SPJ1

Dividing this by 24.0 s gives a power output of 23,600 W.

Power is the ability to influence or control the behaviour of people, events, or things. It is the capacity to make decisions and take action in order to effect change. Power can be physical, economic, political, cultural, or social, and can be held by individuals, organizations, or governments. Power can be used positively to create positive change, or negatively to oppress or exploit. It can be used to create a sense of safety, stability, and justice, or to create uncertainty and chaos.

The power output of the crane is calculated by dividing the work done by the crane (the force multiplied by the distance moved) by the time taken to do the work. In this case, the work done is 13,700 N x 41.4 m = 570,380 Nm. Dividing this by 24.0 s gives a power output of 23,600 W.

To learn more about power
https://brainly.com/question/11569624
#SPJ1

Answer:

To calculate the resistance of the microwave, we can use Ohm's Law, which states that:

resistance = voltage / current

Substituting the given values into this equation, we get:

resistance = 5V / 0.3A

resistance = 16.67 ohms

Therefore, the resistance of the microwave with 5V and a current of 300mA is 16.67 ohms.

Specific heat is a measure of how much energy it takes to raise the temperature of a substance.

Temperature is defined as the measurement of degree of amount of hotness or coldness of a body.

Here,

Specific heat is a measure of how much energy it takes to raise the temperature of a substance. More clearly, specific heat is the amount heat required to raise the temperature of unit mass through one degree.

If an amount of heat Q is given to a body of mass m and ΔT is the rise in temperature. Then specific heat capacity,

      C = Q/mΔT

Its unit is Jkg⁻¹K⁻¹

Specific heat of a substance is a constant but it changes slightly with change in temperature.

The rise in temperature is small for body having large specific heat.

Hence,

Specific heat is a measure of how much energy it takes to raise the temperature of a substance.

To learn more about temperature, click:

https://brainly.com/question/900679

#SPJ9

Answer:

less than 100-J

Explanation:

The potential energy held in the stretched rubber band is turned into kinetic energy of the rock when it is released, assuming that the rubber band is used to launch a rock from a slingshot.

The mass of the rock and the effectiveness of the slingshot in transmitting the energy from the rubber band to the rock are two elements that affect how much kinetic energy the rock will have. To estimate the kinetic energy, though, we may make certain generalizations.

Assume that no energy is lost as a result of friction or air resistance and that the entire potential energy held in the rubber band is transformed into the kinetic energy of the rock. In this hypothetical situation, the potential energy of the stretched rubber band would be equal to the kinetic energy of the rock.

As a result, the rock will have 100 J of kinetic energy when it exits the slingshot if the rubber band contains 100 J of potential energy. The actual kinetic energy of the rock would be less than 100 J since some energy will be wasted owing to things like friction.

If you liked this answer, please mark brainliest!

The force required to lift a load of 100 newtons using machine with mechanical advantage of 4 is 25 newtons.

The ratio of output force to the input force is called as mechanical advantage of a machine. In this case, mechanical advantage is given as 4.

As, Mechanical Advantage = Output Force / Input Force

4 = Output Force / Input Force

So, Output Force = Mechanical Advantage x Input Force

Output Force = 4 x Input Force

100 newtons = 4 x Input Force

Input Force = 100 newtons / 4

Input Force = 25 newtons

Therefore, the force required to lift a load of 100 newtons using a machine with a mechanical advantage of 4 is 25 newtons.

To know more about mechanical advantage, refer

https://brainly.com/question/18345299

#SPJ9

Answer:

b

Explanation:

あなたは本当に知りたいですか？私はあなたが答えを理解する方法ではなく、答えのためにここにいるという意味ですので、答えを書き留めて正しいことができますので、あなたの幸せを願っています

The interia is varied and it depends on the mass, itt will be sameshape and size so it will be light closer.

What is volume ?

Space is occupied by every three-dimensional object. Its volume serves as a gauge for this area. The area contained by an object's limits in three-dimensional space is referred to as its volume. Another name for it is an object's capacity.

What is element ?

The atoms make the element. The atoms are created up of the element; it is a pure substance it can't be able to split up. The element is created up of a single kind of atom. Atoms are the main thing for the creation of elements. Elements are classified according to their performance and physical properties. Elements are placed based on the performance in the Mendeleev periodic table.

Therefore, The interia is varied and it depends on the mass, itt will be sameshape and size so it will be light closer.

Learn more about volume from the given link.

https://brainly.com/question/14197390

#SPJ1

Answer:

Without the table and diagram, it's difficult to provide a specific answer. However, in general, the gravitational attraction between two objects depends on their masses and the distance between them. The force of attraction is stronger when the masses are greater and when the objects are closer together.

Based on this understanding, we can evaluate the claims made by each student:

Student W claims that the probe is pulled harder by the planet with the greater mass when halfway between the planets. This claim is partially supported by the evidence, since the gravitational force is stronger when the masses are greater. However, it doesn't take into account the distance between the planets and the probe.

Student X claims that the probe is pulled harder by the planet nearest the Sun when halfway between the planets. This claim is not supported by the evidence, since the distance between the probe and each planet is not specified.

Student Y claims that the probe is pulled harder by the planet with the greater mass anywhere between the planets. This claim is partially supported by the evidence, since the gravitational force is stronger when the masses are greater. However, it doesn't take into account the distance between the planets and the probe.

Student Z claims that the probe is pulled harder by the planet nearest the Sun anywhere between the planets. This claim is not supported by the evidence, since the distance between the probe and each planet is not specified.

Overall, Student W and Student Y made claims that are partially supported by the evidence, but neither claim takes into account the distance between the planets and the probe. Therefore, it's difficult to determine which claim is best supported by the evidence without more information.

Explanation:

Answer: 12 meters

Explanation:

the rate is 4 meters per second
the rock rolled for 3 seconds
4 x 3 = 12

We can use the kinematic equations to solve for the time it takes for the soccer ball to hit the ground.

Let's use the following variables:

h for the initial height of the soccer ball (12 m)

vi for the initial velocity of the soccer ball (4 m/s)

vf for the final velocity of the soccer ball (0 m/s)

d for the horizontal distance the soccer ball travels before hitting the ground (6.3 m)

t for the time it takes for the soccer ball to hit the ground (what we want to find)

Using the kinematic equation for vertical motion, we can find the time it takes for the soccer ball to reach the ground:

vf^2 = vi^2 + 2*a*h

0 = 4^2 + 2*(-9.8)*12

0 = 16 - 235.2

t_vertical = sqrt(235.2/16) = 3.05 s

So it takes 3.05 seconds for the soccer ball to hit the ground if we consider only the vertical motion.

Next, using the kinematic equation for horizontal motion, we can find the time it takes for the soccer ball to travel the horizontal distance of 6.3 m:

d = vi*t_horizontal

t_horizontal = d/vi = 6.3/4 = 1.575 s

So it takes 1.575 seconds for the soccer ball to travel the horizontal distance of 6.3 m.

Since we know the soccer ball takes the same amount of time to travel horizontally as it does to hit the ground, we can conclude that the time it takes for the soccer ball to hit the ground is 1.575 seconds.

Answer:

To solve this problem, we need to use the law of conservation of momentum, which states that the total momentum before a collision is equal to the total momentum after the collision.

The momentum of an object is given by its mass multiplied by its velocity, so we can calculate the initial momentum of each ball before the collision:

- The northbound ball has a momentum of 535g * 12.4 m/s = 6644 g*m/s north

- The southbound ball has a momentum of 725g * (-6.4 m/s) = -4640 g*m/s north (note that the negative sign indicates southward direction)

Adding these momenta together, we get a total momentum of 6644 g*m/s - 4640 g*m/s = 2004 g*m/s north.

After the collision, the two clay balls stick together and move as a single unit. Let's call the mass of the combined unit "M" and its velocity "v". By conservation of momentum, we know that the total momentum of the combined unit after the collision must be the same as the total momentum before:

M * v = 2004 g*m/s north

To solve for v, we need to figure out the mass of the combined unit. This is simply the sum of the masses of the two original balls:

M = 535g + 725g = 1260g

Substituting this into the equation above, we get:

1260g * v = 2004 g*m/s north

Solving for v, we get:

v = 1.59 m/s north

Therefore, the combined unit moves 1.59 m/s north after the collision.

However, the answer choices given in the problem are in meters per second, not meters per second north/south. To convert the answer, we need to add a direction. Recall that the northbound ball had a positive velocity and the southbound ball had a negative velocity. Since the combined unit is moving northward, we know its velocity must be positive.

Therefore, the final answer is 1.59 m/s north, which corresponds to answer choice C.

Answer:

In water, the particles are much closer together, and they can quickly transmit vibration energy from one particle to the next. This means that the sound wave travels over four times faster than it would in air, but it takes a lot of energy to start the vibration.

Explanation:

Answer:

slower as it is more dense in water

Explanation:

Answer:

a) On the Moon, where the acceleration due to gravity is 0.258g:

First, we need to find the acceleration due to gravity on the Moon:

g_Moon = 0.258g_Earth

g_Moon = 0.258(12.3 m/s^2)

g_Moon = 3.17 m/s^2

Now we can use the range formula for projectile motion to find the distance he could jump:

R = (v^2/g) sin(2θ)

Assuming the same initial velocity and angle of jump, we can rearrange the formula to solve for R:

R = (v^2/g) sin(^2/g_Earth) sin(2θ) * (g_Moon/g_Earth)

R = (1.31 m)^2/ (212.3 m/s^2) * sin(2θ) * (3.17 m/s^2) / (12.3 m/s^2)

R = 0.191 m

Therefore, he could jump approximately 0.191 m on the Moon.

!

a) On the Moon, where the acceleration due to gravity is 0.258g:

First, we need to find the acceleration due to gravity on the Moon:

g_Moon = 0.258g_Earth

g_Moon = 0.258(12.3 m/s^2)

g_Moon = 3.17 m/s^2

Now we can use the range formula for projectile motion to find the distance he could jump:

R = (v^2/g) sin(2θ)

Assuming the same initial velocity and angle of jump, we can rearrange the formula to solve for R:

R = (v^2/g) sin(

network error

^2/g_Earth) sin(2θ) * (g_Moon/g_Earth)

R = (1.31 m)^2/ (212.3 m/s^2) * sin(2θ) * (3.17 m/s^2) / (12.3 m/s^2)

R = 0.191 m

Therefore, he could jump approximately 0.191 m on the Moon.

b) On Mars, where the acceleration due to gravity is 0.293g:

Similarly, we need to find the acceleration due to gravity on Mars:

g_Mars = 0.293g_Earth

g_Mars = 0.293(12.3 m/s^2)

g_Mars = 3.61 m/s^2

Using the same formula and rearrangement as in part a, we can find the distance he could jump on Mars:

R = (1.31 m)^2/ (212.3 m/s^2) * sin(2θ) * (3.61 m/s^2) / (12.3 m/s^2)

R = 0.223 m

Therefore, he could jump approximately 0.223 m on Mars.

Answer: 20

Explanation:

Answer:

The frequency of a mass vibrating on a string describes the number of complete cycles of vibration that occur per unit of time, usually measured in hertz (Hz).

Explanation:

The solutions for questions A and B are

Generally, Tension is a physical force that pulls on an object, often tending to stretch it. It is typically measured in units of force per area, such as newtons per square meter (N/m2). Tension is an important concept in mechanics, physics, engineering, and other fields.

(a) T_1=m_1(g-a)

T_1=4.81 (9.8-3.94)

T_1=28.1866N

(b) In freefall

a=g

T_1=m_1(g-g)

T_1=0 N

Read more about Mass

https://brainly.com/question/19694949

#SPJ1

a) Minimum speed required for the riders so that they stay pinned against the inside of the drum is 18m/s.

b) Angular velocity of the drum at this speed having diameter of the drum is 10 m is 3.6 rad/s

Friction is a resistance to motion of the object. for example, when a body slides on horizontal surface in positive x direction, it has friction in negative x direction and that measure of friction is a frictional force.

frictional force is directly proportional to the Normal(N).

i.e. [tex]F_{fri}[/tex] ∝ N

[tex]F_{fri}[/tex] = μN

where μ is called as coefficient of the friction. It is a dimensionless quantity.

When a body is kept on horizontal surface, its normal will be straight upward which is reaction of mg. i.e. N=mg.

Given,

Diameter of the drum D = 10m , Radius r = 5m

Coefficient of static friction = 0.15

a) To stay everyone pinned against the wall of drum. Frictional Force must be equal to weight mg which are opposite to each other.

μN = mg ........1)

Centrifugal acceleration = Normal

mv²÷r = N

With this equation 1 becomes

μ[tex]\frac{mv^{2} }{r}[/tex] = mg

v² = rg÷μ

v² = 5m*9.8m/s ÷ 0.15

v² = 326.6

v= [tex]\sqrt{326.6}[/tex] = 18.07 ~ 18 m/s

Hence minimum speed required for the riders is 18m/s.

b) for angular velocity of the drum, V=rω

ω = v÷r

ω = 18m/s ÷ 5m

ω = 3.6 rad/s

hence angular velocity of the drum at 18m/s speed is 3.6 rad/s

To know more about frictional, Click :

https://brainly.com/question/13000653

#SPJ9

Answer:

Look down below

Explanation:

300Hz is the 5th harmonic in a 60 Hz system, or the 6th harmonic in a 50 Hz system.

Answer:

Explanation:

Power=work done/time

work done=force* displacement

force=mass*acceleration due to gravity

Therefore, power= mass*acceleration due to gravity*displacement/time

20*9.8*1/1=196watts

Answer:

To calculate the work being done, we need to use the formula:

work = force x distance x cos(theta)

where force is in newtons, distance is in meters, and theta is the angle between the direction of the force and the direction of the movement.

In this case, the force is the weight of the leaf blower, which is 1600 N, the distance is 6 meters, and the angle between the force and the movement is 0 degrees (since Kyle is lifting the leaf blower straight up). So we have:

work = 1600 N x 6 m x cos(0°)

work = 9600 J

Therefore, the joules of work being put out by Kyle are 9600 J.

Explanation:

The magnitude of the electrical field would be 1.5x10^3 N/C.

The electrostatic force experienced by a charged particle in an electric field is given by the formula:

F = qE

Where F is the electrostatic force, q is the charge of the particle, and E is the electric field strength.

In this case, the electrostatic force acting on the particle is 3.0x10^-6 N and the charge of the particle is -2.0x10^-9 C. So we have:

3.0x10^-6 N = (-2.0x10^-9 C)E

Solving for E, we get:

E = (3.0x10^-6 N) / (-2.0x10^-9 C)

E = -1.5x10^3 N/C

Since the electric field is a vector quantity, its magnitude is always positive. Therefore, the magnitude of the electric field in this case is:

|E| = 1.5x10^3 N/C

So the magnitude of the electric field is 1.5x10^3 N/C, directed downward.

More on the electrical field can be found here: https://brainly.com/question/15800304

#SPJ1

Young’s modulus for each of these five materials from largest to smallest are mentioned below.

What is Young’s modulus?

Many substances lack linearity and elasticity after very minor deformation. Only materials that are linearly elastic are subject to the constant Young's modulus. In this case, the ratio of stress to strain, which corresponds to the material's stress, determines the Young's modulus.

What is data?

Facts such as numbers, words, measurements, observations, or even simple descriptions of objects are grouped together as data. Both qualitative and quantitative data are possible. Qualitative data is information that is descriptive (describes something), whereas discrete data can only take particular values (like whole numbers).

Therefore, Young’s modulus for each of these five materials from largest to smallest are mentioned above.

Learn more about Young’s modulus from the given link.

https://brainly.com/question/13257353

#SPJ1

Answer:

20.5 m/s

Explanation:

Answer:

Explanation: In anyway can you get a better picture just a close picture i cant read it

yes they would balance because they have the same weight

Explanation:

hope this helps (:

Since the two children have the same weight, they have to sit at equal distances from the pivot of the seesaw.  Then they will balance.

The average speed of the skier is 53.3 m/min.

option C.

Average speed is a measure of how fast an object or a person travel over a certain distance in a specific amount of time.

It is calculated by dividing the total distance traveled by the time it took to travel that distance.

The formula for average speed is:

Average Speed = Total Distance Traveled / Time Taken

The average speed of the skier is calculated as follows;

Average speed = ( 160 m ) / 3 mins

Average speed = 53.3 m/min

Learn more about average speed here: https://brainly.com/question/24739297
#SPJ1