A piece of metal has a mass of 200g in air and 170g when immersed in water.calculate its volume and density.(Density of water is 1000kgm take g=9.8ms)​

Answer:

The weight of the brick is 300 lb.

Explanation:

Given that,

The work done in lifting a load of bricks = 15000 ft lb

It is lifted to a height of 50 ft

We need to find the weight of the brick. The work done by an object is given by :

[tex]W=F\times d[/tex]

Here, F = W (weight of the bricks)

[tex]F=\dfrac{W}{d}\\\\F=\dfrac{15000\ ft-lb}{50\ ft}\\\\F=300\ lb[/tex]

So, the weight of the brick is 300 lb.

The weight of the brick will be "300 lb".

Given:

Work done,

Height,

As we know the formula,

→ [tex]W = F\times d[/tex]

or,

→ [tex]F = \frac{W}{d}[/tex]

By substituting the values, we get

→     [tex]= \frac{15000}{50}[/tex]

→     [tex]= 300 \ lb[/tex]

Thus the response above is right.  

Learn more:

https://brainly.com/question/20719452

Answer:

The value is  [tex]f = 0.36 \ m[/tex]

Explanation:

From the question we are told that

  The radius of curvature is  [tex]R = 0.72 \ m[/tex]

Generally the radius of curvature is mathematically represented as

        [tex]R = 2f[/tex]

Here [tex]f[/tex] is the focal length hence

       [tex]f = \frac{R}{2}[/tex]

=>     [tex]f = \frac{0.72}{2}[/tex]

=>     [tex]f = 0.36 \ m[/tex]

Answer:

3400 m

Explanation:

Both lightning and thunder happen at the same time but one is faster than the other. The distance traveled by a sound can be calculated from its speed such that;

 speed = distance/time, hence, distance = speed x time.

For a thunder with 340 m/s speed and 10 seconds away from lightning, the distance between the thunder and the lightning can be calculated as;

distance = 340 m/s x 10 s = 3400 m

Answer:

The force of friction acts in the direction opposite to the direction of motion. If friction would have been applied to the skier it would have resulted in a lower velocity and less kinetic energy.

Explanation:

The car will continue at half speed and slow down due to friction after the brakes are released.

The given situation is that the car's motor is stopped and brakes are applied until the car reaches its half speed and the brakes are released. So after the brakes are released, the car will not gain any speed, since there is no force applied. Then it will gradually slow down due to friction.

According to the law of inertia ( i.e., Newton's first law of motion ), an object will tend to stay at rest or motion until an external force is applied. So based on this law, the car will continue at the speed the brakes were released and eventually slow down.

Therefore, the car will continue at half speed and slow down due to friction after the brakes are released.

To know more about law of inertia

https://brainly.com/question/18128368

#SPJ1

Answer:The direction a wave propagates is perpendicular to the direction it oscillates for transverse waves. A wave does not move mass in the direction of propagation; it transfers energy.

Explanation:

The amount of time the ball stay in the air is (t)=3.04 Seconds

The best example that would help us understand and know what time are the clock and the calendar. This clock gives us the exact hour, minutes and seconds. The calendar tells us the exact day, month and year.

To calculate the amount of time the ball stay in the air, we are using the formula,

T=2Vsinθ/g

Here we are given,

V= The velocity of the football.=26 m/s.

θ= The angle that the football makes in the air= 35°

g= The acceleration due to gravity = 9.8 m/s².

We have to calculate, the amount of time the ball stay in the air = T

Now, we put the known values in the above equation,

T=2Vsinθ/g

Or, T= 2*26*sin (35°)/9.80

Or, T= 3.04 Seconds.

Thus, from the above calculation we can conclude that the amount of time the ball stay in the air is (t)=3.04 Seconds

Learn more about time:

https://brainly.com/question/1816510

#SPJ9

Given that,

Mass of a girl, m  = 50 kg

Mass of the boat, m' = 300 kg

Speed of girl, v = 3 m/s

To find,

The velocity with which the boat begin to move backwards.

Solution,

Let the velocity be v'. Using the conservation of momentum to find it. It is given by :

[tex]mv=m'v'\\\\v'=\dfrac{mv}{m'}\\\\v'=\dfrac{50\times 3}{300}\\\\v'=0.5\ m/s[/tex]

So, the velocity moves backward with a speed of 0.5 m/s.

Answer:

[tex]Fr_k=152.88\ N[/tex]

Explanation:

Net Force

The net force is defined as the vector sum of all the forces acting on a body at a certain moment.

We should recall some basic concepts and equations to solve the problem.

If no external forces are applied in the vertical direction, the weight of the object and the normal force have the same magnitude and point to opposite directions.

The friction force is defined as:

[tex]Fr_k=\mu_k N[/tex]

[tex]Fr_s=\mu_s N[/tex]

Where the subindices k and s are referred as to the kinetic and static friction forces respectively.

The condition for the object to move is that the applied force is greater than the friction force.

The crate of oranges has a mass of 30 Kg, thus its weight is:

W = m.g = 30 * 9.8 = 294 N

The normal force is:

N = W = 294 N

The kinetic friction is calculated as:

[tex]Fr_k=0.52* 294[/tex]

[tex]\mathbf{Fr_k=152.88\ N}[/tex]

Answer:

Explanation:

4 is right

Answer:

8

Explanation:

The energy levels is given as

E(n) = n² * h² / ( 8 * m * L²), where

n = 1, 2, 3, 4,... etc

At ground state energy (n = 1), therefore is E(g) = h² / (8 * m * L²).

We can then say that

E(n) = n² * Eg

Therefore, to have E = 64 Eg, we must have n² = 64. And for n² to be equal to 64, we find the square root of n

n = √64

n = 8

Essentially, the needed quantum number is 8

Answer:

B. 2 Hz

Explanation:

Given parameters:

Period of the wave  = 0.5Hz

Unknown:

Frequency of the wave  = ?

Solution:

Frequency is the number of waves that passes through a point.

Period is the time taken for a number of waves to pass through a point.

  Period is the inverse of frequency

  Frequency  = [tex]\frac{1}{t}[/tex]  

 t is the period

  Frequency  = [tex]\frac{1}{0.5}[/tex]  = 2Hz

Answer:2

Explanation:

Answer:

1) 50°

Explanation:

We need to find the angle of incidence first before finding the angle of reflection.

Angle of incidence = 90° - 40°

                                = 50°

Since the angle of incidence is the same as the angle of reflection, the angle of reflection here would be 50°.

Answer:

potential energy

Explanation:

The bent ruler possesses elastic potential energy.  

• The bending of the ruler depends upon the material of which it is made up of.  

• The ruler after bending will gain elastic potential energy.  

• The energy stored as an outcome of applying a force to deform an elastic object is known as the elastic potential energy.  

• This energy is stored unless and until the removal of force takes place and the ruler moves back to its original shape.  

• When the energy is released or when the bent ruler is released from the left hand, then the potential energy stored in it gets convert to kinetic energy and the ruler will recoil or vibrate briskly.  

Thus, it is the elastic potential energy gained by the ruler when one bent it with the left hand.

To know more about:

https://brainly.com/question/25832781

Given the speed of the driver and the time elapsed, distance traveled during his inattentive period is 0.037 kilometers.

Speed is simply referred to as distance traveled per unit time.

Mathematically, Speed = Distance ÷ time.

Given the data in the question;

First, convert 1.7 seconds to hours.

Time = 1.7s = (1.7 / (60×60)hr = 1.7/3600 hrs

Now, find the distance traveled during the inattentive period.

80 km/h = Distance ÷ 1.7/3600 hrs

Distance = 80 km/h × 1.7/3600 hrs

Distance = 136/3600 km

Distance = 0.037 km.

Given the speed of the driver and the time elapsed, distance traveled during his inattentive period is 0.037 kilometers.

Learn more about speed and distance here: brainly.com/question/7359669

#SPJ1

Answer:

12 ounces of beer plus 12 ounces of wine plus 3 ounces of liquor are equivalent to 6 drinks.

Explanation:

In the United States, a standard "drink" of beer has 12 ounces, a standard "drink" of wine has 5 ounces and standard drink of liquor has 1.5 ounces. Then, we obtain the quantity of drinks by dividing the total volume of each drink by its respective unit volume and summing each term. That is:

[tex]N = \frac{12\,oz}{12\,\frac{oz}{dr} }+\frac{12\,oz}{5\,\frac{oz}{dr} }+\frac{3\,oz}{1.5\,\frac{oz}{dr} }[/tex]

[tex]N = 1\,dr+2.4\,dr+2\,dr[/tex]

[tex]N = 5.4\,dr[/tex]

[tex]N = 6\,dr[/tex]

12 ounces of beer plus 12 ounces of wine plus 3 ounces of liquor are equivalent to 6 drinks.

The distance that automobile travel in 1.5 seconds is (S)= 34.275 m.

Distance is a scaler quantity that refers to "how much ground an object has covered" during its motion of time.

To calculate the distance that automobile travel in 1.5 seconds, we are using the formula,

S= ut+(1/2)at²

Here we are given,

u= The initial velocity of the automobile = 20 m/s

t = The amount of time that the automobile travel = 1.5 Seconds.

a=The amount of acceleration of the automobile = 3.8 m/s².

We have to calculate the distance that automobile travel in 1.5 seconds = S

Now, we put the values in the above equation, we get

S= ut+(1/2)at²

Or, S= 20*1.5+(1/2)*3.8*(1.5)²

Or, S= 30+4.275

Or, S= 34.275m

Thus we can conclude that, the distance that automobile travel in 1.5 seconds is (S)= 34.275 m.

Learn more about distance:

https://brainly.com/question/17273444

#SPJ9

Answer:

c.) 10 to 15 minutes

Explanation:

yw :)

Answer:

c.) 10 to 15 minutes

Explanation:

The amount of work required to slide the 3 Kg box 6.90 m along (up) the frictionless incline plane is 183.85 J

Work is defined as the product of force and distance moved in the direction of the force. mathematically it is expressed as:

Work done (Wd) = force (F) × distance (d)

Wd = fd

Where height is involved, the workdone is given as as:

Work done (Wd) = mass (m) × acceleration due to graity (g) × height (h)

Wd = mgh

Considering angle projection,

Wd = mghCosθ

Thus, we can detertmine the work done as follow:

Wd = mghCosθ

Wd = 3 × 9.8 × 6.9 × Cos 25

Wd = 183.85 J

Learn more about workdone:

https://brainly.com/question/14667371

#SPJ1

Golf carts have a high velocity.

Without any improvements, the conventional golf cart's peak velocity is between 12 and 14 miles per hour. The highest velocity that you can get on a golf cart without any upgrades or modifications is around 14 mph.

We can determine how quickly or slowly an item is traveling using the phrases velocity and speed. It occurs to us frequently that we must determine which of two or more moving things is traveling quicker. If both vehicles are traveling in the same direction along the same route, it is simple to determine which is quicker. It is challenging to identify who is moving quickest when their direction of motion is opposing. The idea of velocity is useful in these situations.

When gravity first exerts force on an item, its initial velocity defines how quickly the thing moves. The final velocity, on the other hand, is a vector number that gauges a moving body's speed and direction after it has attained its maximum acceleration.

To learn more about velocity visit:https://brainly.com/question/18084516

#SPJ4

The direction of the current from the positive to the negative battery terminals and the fact that the bulbs are connected in parallel to each other suggests that this circuit is a Closed Parallel Circuit. The correct option is D.

An open circuit and a closed circuit are two types of electrical circuits that describe the flow of electrical current through a circuit.

An open circuit is a circuit in which there is a break in the path of the current, meaning that the current cannot flow through the circuit. In an open circuit, the switch is in the "off" position or there is a broken wire, and so no electrical current can flow through the circuit. This means that there is no voltage or electrical energy being transferred from the source to the load.

On the other hand, a closed circuit is a circuit in which there is a complete path for the current to flow through, meaning that the current can flow through the circuit. In a closed circuit, the switch is in the "on" position, and there is a continuous path for the current to flow from the source to the load and back to the source. This means that there is voltage and electrical energy being transferred from the source to the load.

Here in this question,

The direction of the current from the positive to the negative battery and the fact that the bulbs are connected in parallel to each other suggests that this circuit is a Closed Parallel Circuit.

In a closed parallel circuit, the components are connected in parallel to each other, meaning that they are connected to the same two points in the circuit and the current has multiple paths to flow through. The voltage across each component is the same, and the total current flowing through the circuit is divided among the components according to their resistance.

In contrast, an open series circuit is a circuit in which the components are connected in series, meaning that they are connected end to end in a single path, with no other branch points for the current to follow. If one component fails, the circuit becomes open and the current stops flowing.

Therefore, based on the information provided, the circuit described in the question is a Closed Parallel Circuit.

To learn about Ohm's law click:

brainly.com/question/29775285

#SPJ7

Answer:

0 j

Explanation:

The work done by the employee on the box at the given zero displacement is 0 J.

The given parameters;

The work done by the employee on the box is calculated as follows;

W = Fd

where;

Since the employee sits on the box without moving it, the distance moved by the box = 0

W = 500 x 0

W = 0 J

Thus, the work done by the employee on the box is 0 J.

Learn more about work done and displacement here: https://brainly.com/question/8635561

Answer:

x =  0.0734 m = 7.34 cm

Explanation:

First we shall calculate the area of the piston:

[tex]Area = \pi radius^2\\Area = \pi (0.028\ m)^2\\Area = 0.00246\ m^2[/tex]

Now, we will calculate the force on the piston due to atmospheric pressure:

[tex]Atmospheric\ Pressure = \frac{Force}{Area}\\\\Force = (Atmospheric\ Pressure)(Area)\\Force = (101325\ N/m^2)(0.00246\ m^2) \\Force = F = 249.56\ N[/tex]

Now, for the compression of the spring we will use Hooke's Law as follows:

[tex]F = kx\\[/tex]

where,

k = spring constant = 3400 N/m

x = compression = ?

Therefore,

x =  0.0734 m = 7.34 cm

Answer:

6sec and 8 postion

Explanation:

Answer:

The last one

Explanation:

on the exam

Among the following the derived demands are options 1 and 3 only. Because in each case, the demand for one thing is originated  by the demand for another.

The phrase derived demand in economics refers to the demand for a factor of production or intermediate good that results from the demand for another intermediate or final good. In essence, consumer demand for the firm's product determines how much a firm will need.

Additionally, if activity in one area rises, any sector that contributed to the success of the first sector may also experience growth. Here, the school is hiring more teachers because enrollment is increased. Thus, enrolling more teachers satisfies the demand by greater enrollments.

Similarly by recruiting more construction workers the increased demand for new house by people can be solved. However, the second case for filling the attendance is a necessary and not a derived demand.

To find more on derived demand, refer here:

https://brainly.com/question/14056210

#SPJ2

Answer:

When these waves reach our ears, they make our eardrums vibrate, and we hear the sound of the bell ringing.

Explanation:

Answer: When a bell is pounded, the metal vibrates. The vibrations travel through the air as sound waves. When these waves reach our ears, they make our eardrums vibrate.

Explanation:

We hear the sound of the bell ringing. Sound always needs to travel through some kind of medium, such as air, water, or metal.

Sorry if this is not the answer you are looking for

Given that,

Mass of the object, m = 1 kg

It moves in a circle of radius 0.5 m with a speed of 5 m/s

To find,

The direction of the acceleration.

Solution,

Whenever an object moves in a circular path, the only force that acts on its is centripetal force which is given by the formula as follows :

[tex]F=\dfrac{mv^2}{r}[/tex]

The centripetal acceleration acts in the direction of force. It acts along the radius of the circular path. In this figure, the direction of the acceleration is shown at point d.

Answer:

D!

Explanation:

took the test

Answer:

2700

Explanation:

because calculate the minute1=60×45=2700

Answer:

[tex]v \approx 30.67\,\,\frac{m}{s}[/tex]

Explanation:

We use the kinematic formula for constantly accelerated motion given below:

[tex]v^2=v_0^2+2\,a\Delta x\\v^2=0+2\,g\,(48)\\v^2=940.8\\v \approx 30.67\,\,\frac{m}{s}[/tex]