a person weighing 799 n stands on a scale in an elevator. the elevator is accelerating upwards with an acceleration 0.47 m/s2. what is the reading on the scale? give your answer in newtons to at least three digits.

When the radius of a spherical balloon is 10 cm and the air is being let out at a constant rate of 370 cm3/s, the rate of change of the radius of the balloon is:  37/400π cm/s

We are supposed to find the rate of change of the radius of the balloon when the radius of a spherical balloon is 10 cm and the air is being let out at a constant rate of 370 cm3/s. This is a problem involving a balloon, air and its volume.

Let's first use the formula for the volume of a sphere to get the relationship between the volume and the radius of the spherical balloon.
V= (4/3)πr3
When differentiating both sides of the above equation with respect to time, t, we have;V= (4/3)πr3,  dV/dt= 4πr² dr/dt

From the problem, we have the radius, r = 10 cm and the rate of change of volume, dV/dt = - 370 cm³/s (since the air is being let out of the balloon).

Now we can substitute the given values into the equation to obtain;
dV/dt= 4πr²
dr/dt-370 = 4π(10²)dr/dt
dr/dt = - 370/ (4π(10²))= - 37/400π cm/s
Therefore, the rate of change of the radius of the balloon when the radius of a spherical balloon is 10 cm and the air is being let out at a constant rate of 370 cm3/s is - 37/400π cm/s.

To learn more about "Radius" here:

https://brainly.com/question/14928411#

#SPJ11

The previous question is incomplete, therefore, a properly phrased question is provided below.

What is the rate of change of the radius of a spherical balloon with a radius of 10 cm, when the air is being let out of the balloon at a constant rate of 370 cm³/s?

The water leaves the ground with a velocity of 19.4 m/s.

Old Faithful Geyser in Yellowstone National Park shoots water every hour to a height of 40.0 m. To calculate the velocity of the water as it leaves the ground, we can use the formula V = √(2gh), where V is the velocity, g is the acceleration due to gravity, and h is the height the water is being launched from.

Therefore, V = √(2 * 9.8 * 40.0) = 19.4 m/s. This means that the water leaves the ground with a velocity of 19.4 m/s.

To visualize this, imagine the water being launched straight up from the ground. In one second, the water would move upwards 19.4 m, and in one hour, it would have moved 19.4 * 3600 = 69,840 m, or nearly 70 km.

It is important to note that the velocity of the water is not constant, as it accelerates as it moves upwards. The formula above only applies to the water at the very instant that it leaves the ground.

Additionally, the velocity is affected by factors such as the pressure of the geyser and any wind speeds, so the actual velocity may differ slightly. However, the formula given above can be used to accurately calculate the velocity of the water as it leaves the ground.

For more such questions on Velocity.

https://brainly.com/question/23159933#

#SPJ11

The electric field due to a point charge will always be greater than that of a parallel plate capacitor.

The electric field due to a point charge is given by the formula E=kq/r². Compare the above electric field to the electric field of a large parallel plate capacitor with the same voltage and distance between the plates.

According to Coulomb's law, the electric field due to a point charge varies inversely with the square of the distance from the charge. The magnitude of the electric field between the plates of a capacitor is uniform and is given by E=V/d (where V is the voltage across the plates and d is the distance between them).

Thus, the electric field between the plates of a capacitor is given by E=V/d. Comparing both electric fields, we get that `E[tex]_{point}[/tex] = E[tex]_{plates}[/tex].

It's expected because the electric field between the plates of a capacitor is uniform, and its magnitude depends on the distance between the plates and the voltage applied.

The electric field due to a point charge, on the other hand, varies inversely with the square of the distance between the charge and the point where we want to measure the field. Therefore, the electric field due to a point charge will always be greater than that of a parallel plate capacitor.

Learn more about the electric field at https://brainly.com/question/19878202

#SPJ11

If star A is a giant star, star B is a supergiant star, and star C is a main sequence star, the order of the three stars in terms of increasing radius is Star A, Star C, Star B.

A giant star is a luminous star that is considerably larger and brighter than the sun. The distinction between giant and dwarf stars is primarily determined by their luminosity, and giant stars are more luminous. They are not, however, larger in diameter than dwarf stars. Their size is the outcome of a high luminosity-to-mass ratio.

A supergiant star is a massive star with a luminosity that is many times greater than that of a giant star. As a result, a supergiant star is much larger than a giant star. However, supergiant stars have a similar surface temperature as giant stars.

Sequence stars are stars that spend most of their lives in the primary sequence of stars. A main-sequence star is a star that is in the hydrogen-burning phase of its evolution. It is in a state of hydrostatic equilibrium, meaning that the gravitational force holding the star together is balanced by the pressure generated by the thermonuclear fusion taking place in its core.

The stars will have the following order in terms of increasing radius: Star A, Star C, Star B if star A is a giant star, star B is a supergiant star, and star C is a main sequence star, and they all have the same surface temperature.

To learn more about surface temperature of stars https://brainly.com/question/31116168

#SPJ11

The force would be 6 Newtons for a distance of 30 metres.

A force is defined as any influence that results in a change in an object. Distance is the amount of distance that an object moves over time. A force is applied to an item, and the more force is applied, the farther the thing will move.

Action-at-a-distance forces are those that develop even when the two interacting objects are not in close proximity to one another but are nevertheless able to push or pull against one another despite this physical gap.

To know more about Newtons visit:-

https://brainly.com/question/16889018

#SPJ1

The highest point in the ball's path is approximately 10.71 meters above the ground.

Horizontal distance = Vx × t

33.456 m = (26.8 m/s) × t

t = 1.25 s

Next, we can use the vertical distance formula to find the maximum height of the ball's path:

Vertical distance = Vy0 × t + 0.5 × a × t²

where Vy0 is the initial vertical velocity, which is given by:

Vy0 = V0 × sin(θ)

θ = 23 degrees

V0 = 26.8 m/s

Substituting these values, we get:

Vertical distance = (26.8 m/s) × sin(23°) × 1.25 s + 0.5 × (9.81 m/s²) × (1.25 s)²

Vertical distance = 10.71 m

Acceleration is a fundamental concept in physics that describes the rate of change of an object's velocity over time. It is defined as the change in velocity divided by the change in time, and is expressed in units of meters per second squared (m/s²).

Acceleration can occur in different ways, such as speeding up or slowing down, changing direction, or a combination of both. A positive acceleration means an object is speeding up, while a negative acceleration means it is slowing down. Acceleration also depends on the mass of the object, with a larger mass requiring a greater force to achieve the same acceleration as a smaller mass.

To learn more about Acceleration visit here:

brainly.com/question/30660316

#SPJ4

The Hubble Space Telescope offers clear and stable views of the cosmos without atmospheric distortion but has disadvantages including aging infrastructure, limited sensitivity to certain wavelengths, and difficulty with maintenance.

Advantages of Hubble Space Telescope:

The following are the disadvantages of the Hubble Space Telescope:

While the Hubble Space Telescope has revolutionized astronomy and made many groundbreaking discoveries, it also faces challenges and limitations that must be addressed as new space-based observatories are developed to continue advancing our understanding of the universe.

To know more about Hubble Space Telescope click here:

https://brainly.com/question/30246219

#SPJ11

The wavelength of the sinusoidal wave traveling along a rope is calculated to be 21.5 cm.

The wavelength of a sinusoidal wave is defined as the distance between two consecutive crests or troughs. It can be started by finding the frequency of the oscillator that generates the wave:

frequency = number of vibrations / time

frequency = 45.0 / 29.0 s = 1.55 Hz

After this, we can find the speed of the wave:

speed = distance / time

speed = 400 cm / 12.0 s = 33.3 cm/s

The speed of a sinusoidal wave on a rope is related to its frequency and wavelength by the equation:

speed = frequency x wavelength

Therefore, we can rearrange the equation to solve for wavelength:

wavelength = speed / frequency

wavelength = 33.3 cm/s / 1.55 Hz

wavelength = 21.5 cm

Therefore, the wavelength of the wave is 21.5 cm.

Learn more about wavelength :

https://brainly.com/question/28762766

#SPJ4

The wave's speed on the slinky is 1.504 m/s

The speed of the wave on the slinky is 3.2 meters per second. This is calculated by dividing the frequency of the wave (3.2 Hz) by the wavelength of the wave (0.47 m). The speed of the wave on the slinky is an important factor to consider when studying wave motion and behavior on a slinky. The speed of the wave determines how quickly it can move along the slinky, and it will have an effect on the wave's properties, such as its amplitude, frequency, and wavelength.

The wave's speed on the slinky (in m/s) is 1.504 m/s. The slinky's wavelength is 0.47 m. Continuous waves travel at a frequency of 3.2 Hz on the slinky. The following formula can be used to determine the wave speed: Wave speed = Frequency x Wavelength.

The following formula can be used to calculate wave speed in general:

Wave speed = Distance/time

Let us now use the first formula to solve the question:

Wave speed = Frequency x Wavelength

Wave speed = 3.2 Hz x 0.47 m

Wave speed = 1.504 m/s

Therefore, the wave's speed on the slinky is 1.504 m/s.

Know more about  wave's speed here:

https://brainly.com/question/3148541

#SPJ11

The acceleration be if the force is doubled and the object's mass is halved when a constant force is applied to an object, causing the object to accelerate at 7.50 m/s² is  30.00 m/s².

Therefore Newton's Second Law of Motion states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. It can be expressed mathematically as follows:

[tex]F=ma[/tex]

where F is the force applied to the object,

m is its mass, and

a is its acceleration.

Given that the initial force on the object causes an acceleration of 7.50 m/s²,

we can write it as

[tex]F = m*a_{1}[/tex]

where F1 is the initial force applied,

[tex]a_{1}[/tex] is the initial acceleration, and

m is the mass of the object.

We can rearrange the terms and write it as

[tex]\frac{F}{m}=a_{1}[/tex]

[tex]\frac{F}{m}=7.50[/tex]  m/s²

Now, if the force is doubled and the mass is halved, the equation becomes:

[tex]2F = \frac{1}{2}m[/tex]

where 2F is the new force,

[tex]a_{2}[/tex] is the new acceleration, and

[tex]\frac{1}{2}m[/tex] is the new mass.

We can also write above equation as

[tex](\frac{4F}{m})=a_{2}[/tex]

Substituting the value of [tex]\frac{F}{m}[/tex] as 7.50 m/s²

Simplifying this equation, we can solve for a₂:

[tex]a_{2}=4*a_{1}[/tex]

[tex]a_{2}=4*7.50[/tex]

[tex]a_{2}=30.00[/tex] m/s²

Therefore, if the force is doubled and the object's mass is halved, the acceleration of the object will be four times the initial acceleration, or 30.00 m/s².

To understand more about acceleration:

https://brainly.com/question/460763

#SPJ11

When a skateboarder jumps on a moving skateboard from the side, the skateboard will slow down in this process. The law of conservation of momentum.

According to the law of conservation of momentum, the total momentum of a closed system remains constant if no external forces act on it. So, in this scenario, the initial momentum of the skateboarder and the skateboard moving at a certain speed in one direction is equal to the momentum of the skateboarder and the skateboard moving at a slower speed in the same direction.

This means that the momentum of the skateboarder and the skateboard should be equal in magnitude but opposite in direction to the momentum of the skateboard before the skateboarder jumps on. When the skateboarder jumps on a moving skateboard, the skateboard's momentum changes as the skateboarder's mass is added to it.

Since the law of conservation of momentum applies, the momentum gained by the skateboarder and the skateboard is equal to the momentum lost by the skateboard.

As a result, the skateboard's speed decreases when the skateboarder jumps on.

To know more about initial momentum click here:

https://brainly.com/question/12450698

#SPJ11

The statement "tides are caused by gravitational interactions between the earth, sun, and moon" is true.

Tides are defined as the rise and fall of sea levels caused by the combined effects of gravitational forces exerted by the Moon, Sun, and the rotation of the Earth. The Earth's water surface is continuously pulled towards the Moon, and this results in two bulges of water on opposite sides of the Earth, resulting in high tide.

On the other hand, low tide occurs between the two high tides, where the water level is at its lowest point. The Sun, even though it is 93 million miles away from the Earth, exerts a gravitational force on it. The gravitational force exerted by the Sun on the Earth is about 177 times weaker than that exerted by the Moon.

However, when the Sun, Earth, and the Moon line up, their combined gravitational force results in higher-than-normal tides called Spring Tides, and when they are at right angles to each other, they produce lower-than-normal tides called Neap Tides.

Therefore, Tides are caused by the gravitational pull of the sun and moon on the Earth's oceans, which creates a bulge of water that rises and falls twice a day.

To know more about high tides click here:

https://brainly.com/question/14683300

#SPJ11

The frequency of the microwave signal from the standing wave experiments can be calculated by dividing the speed of light by the wavelength of the microwave. The frequency of the microwave signal from the standing wave experiments was 10.525 GHz, which is the same as the manufacturer label.

The speed of light is approximately 300 million meters per second, and the wavelength of the microwave can be determined from the standing wave pattern produced. After dividing the speed of light by the wavelength, the frequency of the microwave signal can be determined.
The frequency of the microwave signal from the standing wave experiments can then be compared to the manufacturer label. The manufacturer label typically states the frequency of the microwave signal in units of gigahertz (GHz). If the frequency calculated from the standing wave experiments is lower than the frequency indicated on the label, then the experiment was not successful. If the frequency calculated from the standing wave experiments is equal to or greater than the frequency indicated on the label, then the experiment was successful.
In conclusion, the frequency of the microwave signal from the standing wave experiments can be calculated by dividing the speed of light by the wavelength of the microwave. The frequency of the microwave signal from the standing wave experiments can then be compared to the manufacturer label. If the frequency calculated from the standing wave experiments is equal to or greater than the frequency indicated on the label, then the experiment was successful. In this case, the frequency of the microwave signal from the standing wave experiments was 10.525 GHz, which is the same as the manufacturer label.

For more such questions on Standing wave.

https://brainly.com/question/28152265#

#SPJ11

The final answer are force exerted by the bar on the gymnast's hands will be 500 N.

According to the given problem, a 500 N gymnast performs a stationary handstand on the high bar. The problem asks to determine how much force is exerted by the bar on the gymnast's hands.

To solve this problem, we need to apply Newton's third law of motion.

Newton's third law of motion states that every action has an equal and opposite reaction. The force exerted by the gymnast on the bar is equal in magnitude and opposite in direction to the force exerted by the bar on the gymnast.

Thus, the force exerted by the bar on the gymnast's hands will be 500 N.

How much force is exerted by the bar on the gymnast's hands? The force exerted by the bar on the gymnast's hands is 500 N.

To know more about force refer here:

https://brainly.com/question/13191643#

#SPJ11

The average power delivered to the train during its acceleration is 0.134 W.

The average power delivered to the train during its acceleration can be calculated using the equation P = Fv/t. The total mass of the train is 505 g, which can be converted to kilograms by multiplying by 0.001. The time it takes for the train to accelerate is 31.0 ms, which can be converted to seconds by dividing by 1000. The velocity of the train is 0.700 m/s. Using these values, the average power delivered to the train can be calculated as:

P = (505g*0.001 kg/g) * (0.700 m/s/ (31.0ms/1000s))
P = 0.134 W

The average power delivered to the train is 0.134 W. This calculation shows that the electric motor was able to deliver enough power to accelerate the train from rest to 0.700 m/s in 31.0 ms.

For more such questions on Average Power.

https://brainly.com/question/29108216#

#SPJ11

Star B will appear 1/25 as bright compared to star A.

The brightness of a star is proportional to its luminosity and the distance to it. When the distance between the star and the observer increases, the brightness of the star decreases.

In this case, since star A and star B have identical luminosity, the only difference between them is the distance. Therefore, using the inverse square law of light:

Luminosity = 4πd²B

where L is the luminosity, d is the distance, and B is the brightness.

Therefore, if star A is at a distance of 5 pc and star B is at a distance of 25 pc, the apparent brightness of star B compared to star A can be calculated as:

[tex]\frac{apparent\ brightness\ of\ star\ B}{apparent\ brightness\ of\ star\ A} = \frac{(distance\ to\ star\ A)^2}{(distance\ to\ star \ B)^2}[/tex]

[tex]=\frac{(5\ pc)^2}{(25\ pc)^2}[/tex]

[tex]= \frac{1}{25}[/tex]

So star B will appear 1/25 as bright as star A.

Therefore, the answer is (a) 1/25 as bright.

Learn more about the inverse square law of light:

https://brainly.com/question/2114742

#SPJ11

The direction of the force on the proton when between the plates is downwards, in the direction of the electric field.

The acceleration of the proton can be calculated using the formula:

a = F/m

where F is the force on the proton and m is the mass of the proton.

The force on the proton is given by:

F = qE

where q is the charge of the proton and E is the magnitude of the electric field.

The charge of the proton is 1.6 x 10^-19 C. Therefore, the force on the proton is:

F = (1.6 x 10^-19 C)(3.0 N/C)

F = 4.8 x 10^-19 N

The mass of the proton is 1.67 x 10^-27 kg.

Therefore, the acceleration of the proton is:

a = (4.8 x 10^-19 N)/(1.67 x 10^-27 kg) = 2.9 x 10^8 m/s^2

The direction of the acceleration is downwards, in the direction of the electric field.

The path of the proton through the plates will be a straight line with a downward acceleration.

Learn more about the acceleration of a proton at: https://brainly.com/question/26979842

#SPJ1

Complete question:

A proton traveling to the right moves in-between the two large plates. A vertical electric field, pointing downwards with magnitude 3.0 N/C, is produced by the plates. What is the direction of the force on the proton when between the plates?

The pressure at the top of the step is 339 kPa.

We can use the principle of conservation of energy to solve this problem. The total energy of the water at any point along the hose can be expressed as the sum of its potential energy and kinetic energy. Since the water flows with constant speed, its kinetic energy remains constant throughout the hose. Thus, any change in energy must be due to a change in potential energy.

At the bottom of the step, the pressure is given as P1 = 143 kPa. Let's assume that the cross-sectional area of the hose remains constant throughout, so that the volume of water flowing per unit time remains constant as well. Let V be the volume of water flowing per unit time, and let A be the cross-sectional area of the hose. Then, the speed of the water is given by v = V/A.

As the water flows up the step, it gains potential energy due to its increase in height. The increase in potential energy per unit volume of water is given by the product of the height difference and the density of water (ρ = 1000 kg/m³) multiplied by the gravitational acceleration (g = 9.8 m/s²): ΔU/V = ρgh.

Let P2 be the pressure at the top of the step, and let h = 0.2 m be the height of the step. Then, the pressure difference between the top and bottom of the step is given by ΔP = P2 - P1, and the change in potential energy per unit volume of water is ΔU/V = ρgh. Therefore, using the principle of conservation of energy, we have:

1/2 ρv² + P1 = 1/2 ρv² + P2 + ρgh

Simplifying and solving for P2, we get:

P2 = P1 + ρgh

Plugging in the given values, we get:

P2 = 143 kPa + (1000 kg/m³)(9.8 m/s²)(0.2 m) = 143 kPa + 196 kPa = 339 kPa

Therefore, the pressure is 339 kPa.

Learn more about Pressure in this link: https://brainly.com/question/12971272

#SPJ11

Answer:

The mantle is exposed in place of Earth’s missing crust.

Explanation:

When standing on a scale in an elevator, if one notices an increase in their weight, it means that: the elevator is accelerating upwards.

This is due to the fact that the scale underfoot has to counter the upward acceleration of the elevator, which causes the weight measured on the scale to increase. The scale measures the normal force, which is the weight being exerted on the scale, which is equal to the mass of the individual multiplied by the gravitational acceleration on the surface of the earth.

This can be represented by the formula: W = mg,

where W is the weight, m is the mass of the object and g is the gravitational acceleration.

When the elevator is stationary or moving at a constant velocity, the gravitational acceleration is the same as the normal force and the weight of the individual remains constant. However, when the elevator begins to accelerate upwards, the normal force exerted by the scale must increase to counter the upward acceleration of the elevator.

This causes an increase in weight measured on the scale. Therefore, if one notices an increase in their weight while standing on a scale in an elevator, it indicates that the elevator is accelerating upwards.

To know more about acceleration refer here:

https://brainly.com/question/30660316#

#SPJ11

A doubling of the height will result in a doubling of the gravitational potential energy since the gravitational potential energy of an item is precisely proportional to its height above the zero point.

The mass and height of an item affect the gravitational potential energy. V = -GM/r is the formula for gravitational potential. U = mgh is the formula for gravitational potential energy.

This is the acceleration brought on by gravity while you are above the earth's surface. Based on the aforementioned calculation, we may conclude that as an object's height increases, the value of g falls until it is zero.

To know more about gravitational potential visit:-

https://brainly.com/question/31024811

#SPJ1

The highest ramp angle at which the crate can still be at rest is roughly 35.5 degrees.

To determine the maximum ramp angle that still allows the crate to remain at rest, you need to consider the balance of forces acting on the crate. When the crate is on the verge of slipping, the frictional force is equal to the component of gravitational force acting parallel to the ramp.

Given that the coefficient of friction (µ) is 0.7, you can use the formula for the frictional force:

Frictional force (F_friction) = µ * Normal force (F_N)

The normal force acting on the crate is the component of gravitational force acting perpendicular to the ramp, which can be calculated as:

F_N = m * g * cos(θ)

The gravitational force acting parallel to the ramp can be calculated as:

F_gravity_parallel = m * g * sin(θ)

At the maximum angle, the frictional force will be equal to the gravitational force acting parallel to the ramp:

µ * F_N = F_gravity_parallel

Now, substitute the known values:

0.7 * (m * g * cos(θ)) = m * g * sin(θ)

Since the mass (m) and gravitational acceleration (g) are the same on both sides of the equation, they can be canceled out:

0.7 * cos(θ) = sin(θ)

To find the maximum angle (θ), you can use the arctangent function:

θ = arctan(0.7)

θ ≈ 35.5 degrees

So, the maximum ramp angle that still allows the crate to remain at rest is approximately 35.5 degrees.

To know more about frictional force click on below link :

https://brainly.com/question/1714663#

#SPJ11

Kinetic energy, work, potential energy, and thermal energy are all transfers of energy. Kinetic energy is the energy an object has due to its motion. Work is the transfer of energy through a force over a distance.

Potential energy is the energy an object has due to its position or chemical structure. Thermal energy is the energy due to the temperature of an object or system.

Heat is the transfer of energy from one object or system to another due to a difference in temperature.

Kinetic energy is the energy an object has when it is in motion. For example, if a person is running, the energy they use to run is considered kinetic energy.

Work is the energy transferred through a force, such as lifting a box. Work is the result of an applied force that causes an object to move in the direction of the force.

Potential energy is the energy an object has due to its position or chemical structure. For example, when an object is at rest on a table, it has potential energy.

Thermal energy is the energy due to the temperature of an object or system. Heat is the transfer of energy from one object or system to another due to a difference in temperature. Heat is also known as thermal energy.

Kinetic energy, work, potential energy, and thermal energy are all transfers of energy. Heat is also considered a transfer of energy.

All of these energy transfers have different forms, such as motion, force, position, and temperature.

to know more about kinetic energy refer here:

https://brainly.com/question/26472013#

#SPJ11

If the flashlight were the sun, the paper would be the beach, and the beach would be facing the flashlight, then the side of the beach closest to the flashlight would be the warmest. This is because the sun radiates the most light and heat in the direction that it is facing.

If the flashlight were the sun and the paper were the beach, the orientation that would feel the warmest would be when the flashlight is directly overhead, shining down onto the paper. This would represent the position of the sun at high noon on a sunny day.

At this time, the sun's rays would be shining almost directly down onto the beach, providing the most direct and intense heat. The other orientations would not be as warm because the sun's rays would be more indirect and spread out, making them less intense and providing less heat.

The paper would absorb more heat and light on the side facing the flashlight, while the side facing away from the flashlight would remain cooler.

For more such questions on flashlight , Visit:

https://brainly.com/question/4026955

#SPJ11

Using the above values for the speed of sound and wavelength, the frequency of the sound produced by the bird in the tree is determined to be 14.7 Hz. A typical person is unlikely to be able to hear this sound.

As with all waves, the relationship between the frequency and wavelength of sound is and its wavelength.

The following equation can be used to calculate sound intensity: P stands for pressure change or amplitude, D stands for material density, and VW stands for measured sound speed. The more your sound wave oscillates, the louder your sound will be.

To know more about wavelength visit:-

https://brainly.com/question/13533093

#SPJ9

The capacitance of two identical capacitors connected in parallel is double that of one of the capacitors because the equivalent capacitance of two capacitors in parallel is equal to the sum of the individual capacitances.

Therefore, when two identical capacitors are connected in parallel, the total capacitance is twice that of one of the capacitors.

The capacitance of two identical capacitors connected in parallel is equal to the sum of the capacitances of the two individual capacitors. In other words, the capacitance of two capacitors connected in parallel is double the capacitance of one of the capacitors.

Explanation: Capacitance is the amount of electrical charge stored per unit of voltage applied to a conductor. When two capacitors are connected in parallel, the two plates of each capacitor become connected, creating a single plate with twice the area of a single capacitor. This means that the capacitance of two identical capacitors connected in parallel is double the capacitance of one of the capacitors.

Formula: The formula for the capacitance of two capacitors in parallel is given by: Ctotal = C1 + C2, where Ctotal is the total capacitance of the two capacitors connected in parallel and C1 and C2 are the capacitances of the two individual capacitors.

Example: if the capacitance of one capacitor is 10μF, then the total capacitance of two capacitors connected in parallel is 20μF.

For more related questions capacitance.

https://brainly.com/question/28445252

#SPJ11

The law requires you to signal even when you don't see any cars around. This is because signaling provides a visual warning to other drivers or pedestrians that you are about to make a turn or change lanes.

When driving, it is important to signal before making any maneuver to ensure the safety of yourself and others.

When you are driving and you plan to turn or change lanes, you should use the proper hand signals.

To turn left, you should point your left arm out of the window and bend your elbow at a 90-degree angle, with your palm facing forward.

To turn right, you should point your right arm out of the window and bend your elbow at a 90-degree angle, with your palm facing down.

To indicate that you are slowing down or stopping, you should wave your arm up and down.

By signaling your intentions to other drivers, you are allowing them to adjust their speed accordingly. This helps to prevent accidents and keeps traffic flowing smoothly.

Signaling also helps to prevent road rage since drivers can easily anticipate what the other drivers are doing.

Signaling is also important when you are exiting the roadway. If you are turning right, you should indicate your intention to exit the roadway by raising your arm and pointing in the direction of the exit.

This will alert drivers behind you that you are about to leave the roadway and will give them time to adjust their speed.

Signaling is an important part of driving that helps to promote safety on the road. By following the proper hand signals, you can let other drivers know where you are going and help to prevent accidents.

to know more about signal refer here:

https://brainly.com/question/16248997#

#SPJ11

To start in motion an object sitting at rest on a horizontal surface, the horizontal force applied must be greater than the static friction force present.

This static friction force is the force that holds the object in place, and is equal to the coefficient of static friction multiplied by the normal force.

Therefore, if an object has a static friction coefficient of 0.2 and a normal force of 10 Newtons, then the minimum horizontal force required to start in motion the object is 2 Newtons.

The static friction is the force that opposes the initiation of motion between two surfaces in contact that are at rest relative to each other. The magnitude of the static friction force depends on the nature of the surfaces in contact and the force pressing them together.

Once the applied force exceeds the static friction force, the object will begin to move, and kinetic friction will take over.

To learn more about static friction:

https://brainly.com/question/13000653#

#SPJ11

Given that the coefficient of kinetic friction is 0.24 and the push imparts an initial speed of 3.9 m/s, then the box will go as far as 3.23 meters before coming to a stop

The distance traveled by the box is determined by the force of friction and the initial velocity. Assuming that the box is sliding horizontally on a flat surface, we can use the following equation:

d = (v₀² / 2μg)

where d is the distance traveled by the box, v₀ is the initial velocity of the box, μ is the coefficient of kinetic friction, and g is the acceleration due to gravity (9.81 m/s²).

Plugging in the values given in the problem, we get:

d = (3.9² / 2×0.24×9.81) = 3.23 meters

Therefore, the box will travel a distance of approximately 3.23 meters before coming to a stop due to the frictional force acting on it.

Learn more about coefficient of kinetic friction here: https://brainly.com/question/20241845.

#SPJ11

a. The angular acceleration of the wheels is 0.2945 rad/s². b. The angular velocity of the wheels after 8 seconds is 2.3560 rad/s.

Calculation:

a. The formula for angular acceleration is: α = (ω2 - ω1) / (t2 - t1) Whereα is angular acceleration, ω2 is final angular velocity, ω1 is initial angular velocity, t2 is final time, t1 is initial time. To calculate the angular acceleration, we can use the formula:α = (ω2 - ω1) / (t2 - t1)

The initial angular velocity of the wheels is zero since Jasmin starts from rest, soω1 = 0. We know that the wheels make 3 revolutions after 8 seconds, so the final angular velocity can be calculated as follows: ω2 = (3 revolutions / 8 s) x (2π radians / 1 revolution) = 2.3562 rad/s

Therefore,α = (2.3562 rad/s - 0 rad/s) / (8 s - 0 s) = 0.2945 rad/s². The angular acceleration of the wheels is 0.2945 rad/s².

b. To calculate the angular velocity of the wheels after 8 seconds, we can use the formula:ω = ω1 + αtWhereω is angular velocity,ω1 is initial angular velocity,α is angular acceleration, t is time. The initial angular velocity of the wheels is zero since Jasmin starts from rest, so ω1 = 0

We have already calculated the angular acceleration to be 0.2945 rad/s², and we know that the time is 8 seconds, soω = ω1 + αt = 0 + (0.2945 rad/s²) x (8 s) = 2.3560 rad/s. Therefore, the angular velocity of the wheels after 8 seconds is 2.3560 rad/s.

To know more about angular acceleration, refer here:

https://brainly.com/question/29428475#

#SPJ11