According to the law of conservation of momentum, the total momentum of the system of the dolphin and the ball is conserved. Initially, the dolphin and the ball have a total momentum of zero as the ball is at rest.
When the dolphin hits the ball, it exerts a force on it, causing it to move in the direction of the force.
This creates a net momentum in the direction of the ball's motion, which is equal in magnitude and opposite in direction to the momentum of the dolphin.
Therefore, the dolphin's momentum decreases while the ball's momentum increases.
The dolphin continues moving forward but with a reduced velocity, while the ball moves away from the dolphin with a velocity that depends on the mass of the ball and the force applied by the dolphin.
To know more about law of conservation, refer here:
https://brainly.com/question/28996277#
#SPJ11
in a two-slit experiment, monochromatic coherent light of wavelength 600 nm passes through a pair of slits separated by 2.20 x 10-5 m. at what angle away from the centerline does the first bright fringe occur?
The first bright fringe occurs at an angle of approximately 1.564° away from the Centerline in a two-slit experiment using monochromatic coherent light with a wavelength of 600 nm and slits separated by 2.20 x 10^-5 m.
In a two-slit experiment, we observe interference patterns created by monochromatic coherent light. The angle at which the first bright fringe occurs can be found using the formula for constructive interference:
d * sin(θ) = m * λ
Here,
d = distance between the slits (2.20 x 10^-5 m)
θ = angle of the bright fringe from the centerline
m = order of the fringe (m=1 for the first bright fringe)
λ = wavelength of the light (600 nm or 6.00 x 10^-7 m)
Now, rearrange the formula to solve for θ:
sin(θ) = (m * λ) / d
Substitute the values:
sin(θ) = (1 * 6.00 x 10^-7 m) / (2.20 x 10^-5 m)
sin(θ) ≈ 0.0273
Now, find the angle θ:
θ = arcsin(0.0273)
θ ≈ 1.564°
So, the first bright fringe occurs at an angle of approximately 1.564° away from the centerline in a two-slit experiment using monochromatic coherent light with a wavelength of 600 nm and slits separated by 2.20 x 10^-5 m.
To Learn More About Centerline
https://brainly.com/question/14783097
SPJ11
Explain the relation between area, distance and capacitance
The capacitance of a capacitor is: directly proportional to the area of the conductive plates and inversely proportional to the distance between them.
The capacitance (C) of a capacitor is the measure of its ability to store an electrical charge. It is dependent on the surface area (A) of the conductive plates, the distance (d) between these plates, and the permittivity (ε) of the dielectric material that separates the plates. The relationship between these factors can be described by the following formula:
C = ε × (A / d)
In this equation, the area (A) and the distance (d) play crucial roles in determining the capacitance of a capacitor. As the surface area of the plates increases, the capacitance also increases because a larger surface area allows for more charge to be stored. Conversely, as the distance between the plates decreases, the capacitance increases as well since the electric field between the plates becomes stronger, allowing for a higher charge storage capacity.
In summary, the capacitance of a capacitor is directly proportional to the area of the conductive plates and inversely proportional to the distance between them. By adjusting these factors, one can tailor the capacitance of a capacitor to meet specific requirements in various electronic devices and circuits.
To know more about capacitance of a capacitor, refer here:
https://brainly.com/question/26835976#
#SPJ11
The lowest note on a piano is
27. 5 Hz. To fit inside the piano,
the string for the low note can't be
longer than 1. 20 m. If it takes the
full length, what is the speed of
the wave in the string?
(Unit = m/s)
The lowest note on a piano is 27. 5 Hz. To fit inside the piano, the string for the low note can't be longer than 1. 20 m. If it takes the full length, the speed of the wave in the string is 33.0 m/s.
The speed of a wave in a string can be calculated using the formula [tex]v = \sqrt{(T/\mu)}[/tex], where v is the speed of the wave, T is the tension in the string, and μ is the linear density of the string.
To calculate the linear density of the string, we can use the formula μ = m/L, where m is the mass of the string and L is its length. Since we know that the length of the string for the lowest note on the piano is 1.20 m, we can assume that this is the length of the string if it takes the full length.
The frequency of the lowest note on the piano is 27.5 Hz. The wavelength (λ) of the wave can be calculated using the formula [tex]\lambda = v/f,[/tex]where f is the frequency of the wave. For the lowest note on the piano, the wavelength is equal to the length of the string: λ = 1.20 m.
We can use the wavelength and frequency to calculate the speed of the wave in the string: [tex]v = \lambda f = 1.20 \;m \times 27.5\; Hz = 33.0\; m/s.[/tex]
Therefore, if the string for the lowest note on the piano takes the full length of 1.20 m, the speed of the wave in the string is 33.0 m/s.
In summary, the speed of a wave in a string can be calculated using the formula [tex]v = \sqrt{(T/\mu)[/tex], where T is the tension in the string and μ is the linear density of the string.
By assuming that the length of the string for the lowest note on the piano is 1.20 m and using the frequency and wavelength of the wave, we can calculate the speed of the wave in the string.
To know more about speed refer here:
https://brainly.com/question/28060745#
#SPJ11
what conclusion is best supported by the image?
A) The field’s direction changes with the current’s direction.
B) The field weakens farther from the wire.
C) The field increases with greater current.
D) The field’s strength changes with the current’s direction.
The field’s direction changes with the current’s direction this conclusion is best supported by the image. Hence option A is correct.
Current is a flow of charges. it is denoted by i and expressed in ampere A. Mathematically it is expressed as i = q/t, where q is the amount of charge and t is time. Current is nothing but amount of charges flown in the unit time in the electric wire. Charge is expressed in coulomb C and time in second s. hence coulomb per second (C/s) is ampere A. Charge on electron is 1.60217663 × 10⁻¹⁹ which is called as elementary charge.
There are two types of the current, Convectional current and non-conventional current. Convectional current is the current flows from positive to negative. Non convectional current flows direction from negative to positive. Note that flow of electrons is from negative to positive. Hence direction of flow of conventional current is from positive to negative.
To know more about Current :
https://brainly.com/question/2264542
#SPJ1.
The interior of a refrigerator has a surface area of 2. 6 m². It is insulated by a 4. 5 cm thick material that has a thermal conductivity of. 0119 J/m×s ° C. The ratio of the heat extracted from the interior to the work done by the motor is 3. 8% of the theoretical maximum. The temperature of the room is 46. 5°C, and the temperature inside the refrigerator is 8. 5°C. Determine the power required to run the compressor. Answer in units of W
The power required to run the compressor is 18,506 W or approximately 18.5 kW, calculated using the rate of heat transfer through the insulation and the efficiency of the refrigerator.
To determine the power required to run the compressor, we need to consider the heat transfer that occurs through the insulation and the temperature difference between the interior of the refrigerator and the room.
First, we can calculate the rate of heat transfer through the insulation using the formula:
Q = kA (ΔT / d)
where Q is the rate of heat transfer, k is the thermal conductivity of the insulation material, A is the surface area of the refrigerator, ΔT is the temperature difference between the interior and exterior of the refrigerator, and d is the thickness of the insulation. Plugging in the given values, we get:
Q = (0.0119 J/m·s·°C) × (2.6 m²) × ((46.5°C - 8.5°C) / 0.045 m)
Q = 581.6 W
This represents the rate at which heat is flowing into the refrigerator from the warmer surroundings. To maintain the interior temperature at 8.5°C, the refrigerator must remove this heat at the same rate.
The ratio of the heat extracted from the interior to the work done by the motor is 3.8% of the theoretical maximum. The theoretical maximum is given by the Carnot efficiency, which is:
η = 1 - (T_cool / T_hot)
where T_cool is the temperature inside the refrigerator and T_hot is the temperature outside. Plugging in the given values, we get:
η = 1 - (8.5°C / 46.5°C) = 0.8172
So the actual efficiency of the refrigerator is:
ε = 0.038 × 0.8172 = 0.0314
This means that for every 1 W of power consumed by the motor, the refrigerator extracts 0.0314 W of heat from the interior. Therefore, the power required to run the compressor is:
P = Q / ε = 581.6 W / 0.0314 = 18,506 W
So the power required to run the compressor is 18,506 W or approximately 18.5 kW.
To learn more about compressors
https://brainly.com/question/31672001
#SPJ4
A 200-N solid sphere 0. 20 m in radius rolls without slipping 6. 0 m down a ramp that is inclined at 34° with the horizontal. What is the angular speed of the sphere at the bottom of the slope if it starts from rest?
The angular speed of the sphere at the bottom of the ramp is approximately 7.64 rad/s.
We can use the conservation of energy principle. The total mechanical energy of the system (kinetic energy + potential energy) will be conserved, assuming there is no friction.
1. Find the potential energy of the sphere at the top of the ramp:
U = mgh
where m = 200 N, g = [tex]9.8 m/s^2[/tex], and h = d*sin(θ)
h = 6.0 m * sin(34°) = 3.40 m
U = (200 N)*([tex]9.8 m/s^2[/tex])*(3.40 m) = 6616 J
2. Find the kinetic energy of the sphere at the bottom of the ramp:
[tex]K = (1/2)*I*w^2 + (1/2)*mv^2[/tex]
where I is the moment of inertia of the sphere, w is the angular speed, and v is the linear speed of the sphere.
Since the sphere is rolling without slipping, we can use the relationship between linear and angular speed:
v = r*w
Also, for a solid sphere, the moment of inertia is I = (2/5)*m*r^2.
Substituting these values, we get:
[tex]K = (1/2)*(2/5)*m*r^2*w^2 + (1/2)*mv^2[/tex]
[tex]K = (1/5)*m*r^2*w^2 + (1/2)*mv^2[/tex]
At the bottom of the ramp, the sphere has no initial linear or angular speed, so v = 0.
3. Equate the initial and final energies to find the final angular speed:
K + U = U_f
where U_f = 0 (since the sphere has reached the bottom of the ramp and has no potential energy).
Substituting the values of K and U, we get:
[tex](1/5)*m*r^2*w^2 = -U[/tex]
[tex](1/5)*200 N*(0.20 m)^2*w^2 = -6616 J[/tex]
Solving for w, we get:
[tex]w = \sqrt{(-5*6616 J / (2*200 N*(0.20 m)^2))}[/tex]
w ≈ 7.64 rad/s
To know more about energy refer here
https://brainly.com/question/41687426#
#SPJ11
How many criteria determine if a naturally occurring object is "magnetic"?
There are three main criteria that determine if a naturally occurring object is "magnetic"
1. The object must be ferromagnetic (usually iron, nickel, or cobalt), meaning it contains atoms with unpaired electrons that can align themselves with an external magnetic field.
2. The magnetic moments of these atoms must be strong enough to cause the material to be magnetic.
3. The material must have a net magnetic moment, meaning that the magnetic moments of the individual atoms are aligned in the same direction.
While these three criteria are the primary factors that determine whether a naturally occurring object is magnetic, other factors can also influence its magnetism. For example, the temperature and pressure of the material can affect the strength of its magnetic interactions, and the presence of impurities or defects can alter the way its magnetic moments interact.
To know more about magnetic objects, click here;
https://brainly.com/question/26958664
#SPJ11
Why does the plasma tail of a comet always point away from the sun?.
The plasma tail of a comet always points away from the Sun due to a phenomenon called the solar wind. The solar wind is a stream of charged particles, primarily protons and electrons, emitted by the Sun. As the solar wind interacts with the coma (the gas and dust surrounding the comet's nucleus), it exerts a force on the charged particles in the coma, causing them to be pushed away from the Sun.
Here's a more detailed explanation of the process:
1. Solar Wind: The Sun continuously emits a stream of charged particles, primarily protons and electrons, known as the solar wind. The solar wind extends throughout the solar system.
2. Coma Formation: As a comet approaches the Sun, the solar radiation and heat cause the icy nucleus of the comet to vaporize and release gas and dust. This forms a cloud-like region around the nucleus called the coma.
3. Solar Wind Interaction: The charged particles in the solar wind carry an electric charge and have a magnetic field associated with them. When the solar wind encounters the coma of the comet, it interacts with the charged particles in the coma.
4. Ionization and Pressure: The solar wind interacts with the coma, ionizing some of the gas molecules and creating a region of plasma. The solar wind exerts pressure on the plasma and the ionized gas molecules.
5. Radiation Pressure and Magnetic Field: The solar wind exerts a force on the plasma and ionized gas particles in the coma. This force is known as radiation pressure. Additionally, the solar wind's magnetic field also plays a role in guiding the plasma and ionized particles.
6. Tail Formation: The combined effects of radiation pressure and the magnetic field cause the plasma and ionized gas particles to be pushed away from the Sun. This creates a tail that extends in the direction opposite to the Sun, which is referred to as the plasma tail of the comet.
Overall, the interaction between the solar wind and the charged particles in the coma of the comet causes the plasma tail to always point away from the Sun, regardless of the comet's motion through space.
To know more about plasma refer here
https://brainly.com/question/8746180#
#SPJ11
Please describe this graph
a. Explain the relationship between variables.
b. State if it is a linear or nonlinear graph
c. Give an example of what this graph could be about.
To describe the graph we need to explain the specific concepts mentioned below:
a. The relationship between variables on a graph refers to how one variable changes in response to the other. This can be positive (both variables increase or decrease together), negative (one variable increases while the other decreases), or no relationship (no discernible pattern between the two variables).
b. A graph can be classified as linear or nonlinear based on the shape of the relationship between the variables. A linear graph forms a straight line, indicating a constant rate of change between the variables. A nonlinear graph has a curve or irregular shape, indicating a variable rate of change between the variables.
c. An example of a graph could be a scatter plot of people's ages (x-axis) and their monthly income (y-axis). If the points form a straight line with a positive slope, it would indicate a linear relationship, meaning that as people's ages increase, their income generally increases as well.
For more questions on: concepts
https://brainly.com/question/18798678
#SPJ11
Compare the electric force experienced by an electron in the hydrogen atom to the gravitational force experienced by the electron
The electric force experienced by an electron in the hydrogen atom is significantly stronger than the gravitational force experienced by the electron.
The electric force is responsible for holding the electron in orbit around the nucleus, while the gravitational force between the two is negligible. This is due to the fact that the electric force is much stronger than the gravitational force, by a factor of approximately 10^36.
This means that the electric force is the dominant force acting on the electron in the hydrogen atom, and determines its behavior within the atom. The strength of the electric force is determined by the charges of the particles involved, while the strength of the gravitational force is determined by their masses. Since the electron is much lighter than the nucleus, the gravitational force between the two is negligible in comparison to the electric force.
In summary, the electric force experienced by an electron in the hydrogen atom is much stronger than the gravitational force experienced by the electron, and is the dominant force responsible for the electron's behavior within the atom.
For more about electric force:
https://brainly.com/question/31696602
#SPJ11
_______ assisted Anton Raphael Mengs with the iconography of his ceiling fresco, Parnasus, in the Villa Albani.
A) Johann Winckelmann
B) Cardinal Albani
C) Jacques Louis David
D) Joshua Reynolds
Answer:
Explanation:
The correct answer is A) Johann Winckelmann. Johann Winckelmann, a German art historian and archaeologist, assisted Anton Raphael Mengs with the iconography of his ceiling fresco, Parnassus, in the Villa Albani
A person gets their 800 kg car stuck in a rut, then spend the remaining 4 hours of the afternoon trying to push the car out of the rut. How much work did the person do over those 4 hours?
To calculate the amount of work done, we need to know the force exerted by the person and the distance the car was moved. Work is calculated using the formula: Work = Force × Distance. Without the information about the force exerted and the distance the car was moved, it is not possible to determine the exact amount of work done by the person over the 4 hours spent pushing the 800 kg car.
Visit https://brainly.com/question/18094932 to know more about Work.
#SPJ11
On a planet other than earth, the acceleration due to gravity is more than on earth. if you float in water on this planet, you would
a. find it easier to float on earth.
b. harder to float on earth.
c. same effort to float on earth
d. you would sink on earth
e. have a greater buoyant force on earth
The buoyant force experienced by an object immersed in a fluid is given by the equation:
Buoyant force = (Density of fluid) x (Volume of fluid displaced) x (Acceleration due to gravity)
Since the density of water is constant, the only factor that changes when we compare floating in water on different planets is the acceleration due to gravity.
If the acceleration due to gravity is more on the other planet, then the buoyant force experienced by the object will also be more compared to the buoyant force experienced on Earth, given the same volume of fluid displaced. Therefore, the object would find it easier to float on the other planet than on Earth.
So the correct answer is: a. find it easier to float on earth.
To know more about buoyant force refer here
https://brainly.com/question/20165763#
#SPJ11
a 500 g model rocket is on a cart that is rolling to the right at a speed of 3.0 m/s. the rocket engine, when it is fired, exerts an 8.0 n vertical thrust on the rocket. your goal is to have the rocket pass through a small horizontal hoop that is 20 m above the ground. at what horizontal distance left of the hoop should you launch?
The rocket should be launched about 12.3 meters to the left of the hoop to pass through it.
First, we need to calculate the time it takes for the rocket to reach the height of the hoop. We can use the kinematic equation:
y = v₁t + 1/2a*t²
Where y is the vertical displacement (20 m), v₁ is the initial vertical velocity (0 m/s), a is the acceleration due to gravity (-9.8 m/s²), and t is the time it takes to reach the height of the hoop.
Plugging in the values, we get:
20 m = 0 + 1/2*(-9.8 m/s²)*t²
Solving for t, we get:
t = √(40/9.8) ≈ 2.02 s
Now we can use the horizontal distance formula:
d = v₁t + 1/2a*t²
Where d is the horizontal distance, v₁ is the initial horizontal velocity (3.0 m/s), and a is the horizontal acceleration due to the rocket engine (unknown).
We know that the vertical thrust of the rocket engine (8.0 N) is equal to the weight of the rocket, so we can find the horizontal acceleration using:
a = F/m = 8.0 N / 0.5 kg = 16 m/s²
Plugging in the values, we get:
d = 3.0 m/s * 2.02 s + 1/2 * 16 m/s² * (2.02 s)²
d ≈ 12.3 m
To know more about thrust, here
brainly.com/question/15190995
#SPJ4
what time will the northern lights be visible tonight?
Answer:
there is a slight chance for them to reappear again tonight
A group of science students take a class trip to a coastal area to learn more about heat energy and heat transfer concepts. Choose the primary type of
heat transfer that occurs in the situations that follow. If heat transfer is not responsible for the situation that is described, choose letter d, "No heat
transfer took place. "
A student burned his finger on a hot charcoal grill
.
O Conduction
O Convection
O Radiation
O No heat transfer took place.
Heat transfer that occurs in the situations that follow. If heat transfer is not responsible for the situation that is conduction
Option A is correct.
Conduction :Conduction is the cycle by which heat energy is communicated through impacts between adjoining particles or atoms. In contrast to gases, where the distance between the particles is greater, solids and liquids have a higher rate of conduction.
Conduction is the interaction by which intensity is moved from the more sizzling finish to the colder finish of an item. Heat spontaneously flows along a temperature gradient, and the object's thermal conductivity, or k, is its capacity to conduct heat.
Learn more about heat conduction :
brainly.com/question/30416117
#SPJ4
I need to know the answers for 2 and 3
The ride's spring constant is 8625 N/m.
The Nerf gun's spring has a spring constant of 920 N/m.
How to calculate spring constant?To find the spring constant:
F = kx
where F = force applied to the spring, k = spring constant, and x = displacement of the spring.
Find the force applied to the spring, using Newton's second law:
F = ma
where m = combined mass of the Peas and their car, and a = acceleration of the car as it comes to a stop.
Since the car is initially moving at a constant velocity of 1.0 m/s, its initial acceleration is 0 m/s². Therefore, the only acceleration acting on the car is the deceleration caused by the spring.
To find the deceleration, using the equation:
v² = u² + 2as
where v = final velocity (0 m/s), u = initial velocity (1.0 m/s), a = acceleration, and s = displacement (0.20 m).
Rearranging this equation to solve for a:
a = (v² - u²) / (2s) = (0 - 1.0²) / (2 x 0.20) = -2.5 m/s²
Using Newton's second law to find the force applied to the spring:
F = ma = 690 kg × (-2.5 m/s²) = -1725 N
Finally, use the formula F = kx to solve for k:
k = F / x = -1725 N / (-0.20 m) = 8625 N/m
Therefore, the spring constant of the ride is 8625 N/m.
3) To find the spring constant, use the formula:
v = √(kx² / m)
where v = velocity of the dart, k = spring constant, x = displacement of the spring (0.04 m), and m = mass of the dart (0.92 g = 0.00092 kg).
Solving for k:
k = m v² / x² = 0.00092 kg × (16 m/s)² / (0.04 m)² = 920 N/m
Therefore, the spring constant of the spring used in the Nerf gun is 920 N/m.
Find out more on spring constant here: https://brainly.com/question/1968517
#SPJ1
A silver atom at rest has a mass of about 1. 8×10−25kg. What is the rest energy of a silver atom?
The rest energy of a silver atom can be calculated using Einstein's famous equation, E=[tex]mc^{2}[/tex], where E is the energy, m is the mass and c is the speed of light.
Rest energy of a silver atom (E) = mass of silver atom (m) x speed of light [tex](c)^{2}[/tex]
= 1.8 x [tex]10^{-25}[/tex] kg x (3 x [tex]10^{8}[/tex] [tex]m/s)^{2}[/tex]
= 1.62 x [tex]10^{8}[/tex] J
This means that even when the silver atom is at rest, it has an enormous amount of energy stored in its mass due to its mass-energy equivalence.
This concept is important in understanding nuclear reactions, where a small amount of mass is converted into energy through the process of nuclear fission or fusion.
To know more about Einstein, refer here:
https://brainly.com/question/31320432#
#SPJ11
a 12.0-kg motorcycle wheel is approximately an annular ring with an inner radius of 0.275 m and an outer radius of 0.325 m. the motorcycle is on its center stand, so that the wheel can spin freely. if the drive chain exerts a force of 2,000 n at a radius of 5.00 cm, how long, starting from rest, does it take to reach an angular velocity of 95.0 rad/s?
As a result, the motorbike wheel takes roughly 0.513 seconds to attain an angular velocity of 95.0 rad/s.
The first step in solving this problem is to find the moment of inertia of the motorcycle wheel. We can use the formula for the moment of inertia of an annular ring:
I = (1/2)mr^2, where m is the mass of the wheel and r is the average radius of the ring, which is (0.325 m + 0.275 m)/2 = 0.3 m.
Plugging in the values, we get:
I = (1/2)(12.0 kg)(0.3 m)^2 = 0.54 kg m^2
Next, we can use the formula for torque to find the net torque acting on the wheel:
τ = Fr, where F is the force exerted by the drive chain and r is the radius at which the force is applied.
Plugging in the values, we get:
τ = (2,000 N)(0.05 m) = 100 Nm
Finally, we can use the rotational kinematics equation to find the time it takes for the wheel to reach an angular velocity of 95.0 rad/s, starting from rest:
ω = ω0 + αt, where ω0 is the initial angular velocity (which is zero), α is the angular acceleration, and t is the time.
We can rearrange this equation to solve for t:
t = (ω - ω0)/α
The angular acceleration α is related to the net torque τ and the moment of inertia I by the formula:
α = τ/I
Plugging in the values, we get:
α = 100 Nm / 0.54 kg m^2 = 185.2 rad/s^2
Now we can plug in all the values to find t:
t = (95.0 rad/s - 0)/185.2 rad/s^2 = 0.513 s
Therefore, it takes approximately 0.513 seconds for the motorcycle wheel to reach an angular velocity of 95.0 rad/s.
To learn more about : angular velocity
https://brainly.com/question/29342095
#SPJ11
Particles q1,q2, and q3 are in a straight line particles q1=-5. 00 x 10^-6 C,q2=+2. 50 x 10^-6 C, and q3=-2. 50x10^-6 particles q1 and q2 are separated by 0. 500m. Particles q2 and q3 are separated by 0. 250 m. What is the net force on q2?
The net force on q2 is -112.5 N, directed towards q3.
To find the net force on q2, we need to first find the forces exerted on it by q1 and q3 using Coulomb's Law:
The force exerted by q1 on q2 is given by:
[tex]F1 = (k * q1 * q2) / d1^2[/tex]
where k is Coulomb's constant ([tex]9 * 10^9 N m^2 / C^2[/tex]), d1 is the distance between q1 and q2 (0.5 m).
Plugging in the values:
F1 = [tex](9 * 10^9 N m^2 / C^2)[/tex] * [tex](-5.00 * 10^{-6 }C)[/tex] * ([tex]2.50 * 10^{-6} C[/tex]) / [tex](0.5 m)^2[/tex]
F1 = -22.5 N (repulsive, as q1 and q2 have opposite signs)
The force exerted by q3 on q2 is given by:
[tex]F3 = (k * q3 * q2) / d3^2[/tex]
where d3 is the distance between q2 and q3 (0.25 m).
Plugging in the values:
F3 = [tex](9 *10^9 N m^2 / C^2)[/tex] *[tex](-2.50 * 10^{-6} C)[/tex] * [tex](2.50 * 10^{-6} C)[/tex] / [tex](0.25 m)^2[/tex]
F3 = -90 N (attractive, as q2 and q3 have the same sign)
To find the net force, we need to add these forces vectorially, since they act in opposite directions:
Fnet = F1 + F3
Fnet = -22.5 N - 90 N
Fnet = -112.5 N
To know more about Coulomb's Law refer here
https://brainly.com/question/506926#
#SPJ11
The lowest note on a piano is
27. 5 Hz. To fit inside the piano,
the string for the low note can't be
longer than 1. 20 m. If it takes the
full length, what is the speed of
the wave in the string?
(Unit = m/s)
The speed of the wave in the string if it takes the full length for the lowest note on a piano (27.5 Hz) is 33 m/s.
What is Wave?
A wave is a disturbance or variation that travels through a medium, transferring energy from one point to another without the overall movement of the medium itself. Waves can take many forms and occur in many different physical systems, such as water waves on the surface of a lake, sound waves traveling through the air, or electromagnetic waves (such as light) traveling through space.
This is much higher than the speed of sound in air (343 m/s at room temperature), which means that the wave travels through the string much faster than it would through the air. However, this speed is not the speed of the wave we are interested in, since it would only apply if the wave were traveling along an infinitely long string. In reality, the wave is confined to the length of the string, so its speed is lower.
To find the speed of the wave in the string, we need to consider the effect of the boundary conditions at the ends of the string. The ends of the string are fixed, which means that the wave must have a node at each end. This reduces the effective length of the string to (1/2)λ:
L' = (1/2)λ = (1/2)(2.40 m) = 1.20 m
Now we can calculate the speed of the wave in the string:
v = fλ = (27.5 Hz)(1.20 m) = 33 m/s
To know more about Wave visit;
https://brainly.com/question/15663649
#SPJ4
Titan, with a radius of 2. 58 x 10^6 m, is the largest moon of the planet Saturn. If the mass of Titan is 1. 35 x10^23 kg, what is the acceleration due to gravity on the surface of this moon?
A. 1. 35 m/s^2
B. 3. 49 m/s^2
C. 3. 49 x 10^6 m/s^2
D. 1. 35 x 10^6 m/s^2
The acceleration due to gravity on the surface of Titan can be calculated using the formula g = GM/[tex]R^{2}[/tex], where G is the gravitational constant, M is the mass of the moon, and R is the radius of the moon. Therefore, the correct answer is B.
Plugging in the given values, we get g = (6.67 x [tex]10^{-11}[/tex] [tex]Nm^{2}/kg^{2}[/tex])(1.35 x [tex]10^{23}[/tex] kg)/[tex](2.58* 10^{6}m)^{2}[/tex] = 3.49 [tex]m/s^{2}[/tex].
This means that an object on the surface of Titan would experience a gravitational acceleration of 3.49 [tex]m/s^{2}[/tex], which is about one-seventh of the acceleration due to gravity on Earth.
To know more about gravitational acceleration, refer here:
https://brainly.com/question/30429836#
#SPJ11
A soda bottle (m=0. 1 kg) filled with a flammable vapor is ignited and a rubber stopper (m=0. 01kg) is fired across the room at 100m/s. Find the recoil velocity of the soda bottle
The recoil velocity of the soda bottle is -10 m/s
To find the recoil velocity of the soda bottle, we'll need to use the conservation of momentum principle. The initial momentum of the system is zero since both the soda bottle and rubber stopper are initially at rest. The equation for conservation of momentum is:
m1v1 + m2v2 = 0
Where m1 and v1 are the mass and velocity of the soda bottle, and m2 and v2 are the mass and velocity of the rubber stopper. We know the masses and the velocity of the rubber stopper, so we can plug in those values:
(0.1 kg) * v1 + (0.01 kg) * (100 m/s) = 0
Now, solve for v1 (the recoil velocity of the soda bottle):
0.1 kg * v1 = -1 kg*m/s
v1 = -1 kg*m/s / 0.1 kg
v1 = -10 m/s
The recoil velocity of the soda bottle is -10 m/s, with the negative sign indicating that it moves in the opposite direction to the rubber stopper.
To learn more about velocity, refer below:
https://brainly.com/question/17127206
#SPJ11
Which therapy is associated with light waves, but not sound waves? breaking down kidney stones acoustically targeting the delivery of a drug cauterizing an incision or wound ablating tumors
Cauterizing an incision or wound therapy is the therapy that is associated with light waves, but not sound waves. The correct option is (C).
A medical treatment called cauterizing an incision or wound includes burning or coagulating tissues with heat or electricity in order to stop bleeding or hasten wound healing. The main objective of cauterization is to produce a thermal action that closes off blood vessels in order to provide hemostasis and stop excessive bleeding.
During surgical procedures, cauterization is frequently performed to stop bleeding, remove or destroy aberrant tissue, or close off blood arteries. In some medical treatments, such as the removal of skin tags or warts, it is also utilized.
Hence, the therapy is associated with light waves, but not sound waves cauterizing an incision or wound. Option (C) is correct.
To learn more about Waves, here:
https://brainly.com/question/19477984
#SPJ12
The complete question is:
A: breaking down kidney stones
B: acoustically targeting the delivery of a drug
C: cauterizing an incision or wound
D: ablating tumors
A) Find the tension in each of the two ropes supporting a hammock if one is at an angle of θ1 = 10 ∘ above the horizontal and the other is at an angle of θ2 = 33 ∘ above the horizontal. The person sleeping in the hammock (unconcerned about tensions and ropes) has a mass of 66 kg . Express your answer using two significant figures.
T1= ? N
B) Express your answer using two significant figures.
T2= ? N
(a) The tension in the rope at an angle of 10° above the horizontal is approximately 798.5.4 N.
(b) The tension in the rope at an angle of 33° above the horizontal is approximately937.7 N.
What is the tension in the rope?To find the tension in each rope, we can use the fact that the net force in the vertical direction must be zero since the person in the hammock is at rest. Let T1 and T2 be the tensions in the ropes, and let the x-axis point to the right and the y-axis point upward.
A) The forces acting on the person are their weight (mg) downward and the tensions T1 and T2 in the two ropes, which make angles θ1 and θ2 with the horizontal.
The vertical components of the tensions are T1sinθ1 and T2sinθ2, respectively, and the horizontal components are T1cosθ1 and T2cosθ2.
Therefore, we can write:
T1sinθ1 + T2sinθ2 = mg (vertical equilibrium)
T1cosθ1 = T2cosθ2 (horizontal equilibrium)
Solving for T1 and T2, we get:
T1 = (mgcosθ2) / (sinθ1cosθ2 + sinθ2cosθ1)
T1 = (66)(9.81 )(cos(33°)) / (sin(10°)cos(33°) + sin(33°)cos(10°))
T1 ≈ 798.5.4 N
B) Similarly, we can use the horizontal equilibrium equation to find T2:
T2 = T1cosθ1 / cosθ2 = (798.5 N)(cos(10°)) / cos(33°) ≈ 937.7 N
Learn more about tension on rope here: https://brainly.com/question/29466375
#SPJ1
what do we need to measure in order to determine a star's luminosity? what do we need to measure in order to determine a star's luminosity? apparent brightness and mass apparent brightness and temperature apparent brightness and distance
In order to determine a star's luminosity, we need to measure its apparent brightness and distance. Option C is correct.
Apparent brightness refers to the amount of light that we observe from a star here on Earth, and it is affected by both the star's luminosity and its distance from us. Therefore, in order to determine a star's luminosity, we need to know its distance from us so that we can correct for the effects of distance on the apparent brightness.
Once we know the star's apparent brightness and distance, we can use the inverse square law of light to calculate the star's luminosity. The inverse square law states that the apparent brightness of an object is inversely proportional to the square of its distance from us. By knowing the distance and apparent brightness of a star, we can calculate its luminosity, which is a measure of the total amount of energy that the star is emitting per unit time. Option C is correct.
To know more about the Luminosity, here
https://brainly.com/question/31102332
#SPJ4
What produces electricity from a chemical reaction and cannot be run in reverse
4 major functions of the skeletal system
The functions of the skeletal system are support, movement, production of cells and protection.
The bones, muscles, ligaments, and tendons make up a skeletal system in the human body. It serves as body's support system to enable correct movement and bodily function. The skeleton gives the entire body structural support, allowing us to sit, stand, and move freely. In addition, fragile organs the brain, heart, and lungs are safeguarded by the bones of the skull, ribs, and spinal column.
Additionally, the skeletal system makes blood cells and stores minerals. The production of these cells, and platelets all essential for immune system and blood clotting take place in the bone marrow, which is found inside numerous bones. In addition, our ability to move and engage in activities like running, jumping, and dancing is made possible by our bones working in tandem with our muscles and joints.
Read more about skeletal system on:
https://brainly.com/question/30323629
#SPJ1
What is the electric potential at points A , B , and C in (Figure 1)? Suppose that q = 1. 5 nC , r1 = 1. 0 cm , and r2 = 2. 1 cm
The electric potential at point A is 1,348.5 V, at point B is 641.5 V
To determine the electric potential at points A, B, and C in Figure 1, we will use the following formula for electric potential (V) due to a point charge (q):
V = k * q / r
where k is the electrostatic constant (approximately 8.99 x 10^9 N m^2/C^2), q is the charge (1.5 nC or 1.5 x 10^-9 C), and r is the distance from the charge to the point of interest.
For point A (r1 = 1.0 cm or 0.01 m):
V_A = (8.99 x 10^9 N m^2/C^2) * (1.5 x 10^-9 C) / (0.01 m)
V_A = 1.3485 x 10^3 V
For point B (r2 = 2.1 cm or 0.021 m):
V_B = (8.99 x 10^9 N m^2/C^2) * (1.5 x 10^-9 C) / (0.021 m)
V_B = 641.5 V
For point C, we need to know the distance from the charge to point C. If it's not provided, we cannot calculate the electric potential at point C.
In summary, the electric potential at point A is 1,348.5 V, at point B is 641.5 V, and we cannot calculate the electric potential at point C without knowing the distance.
To learn more about distance, refer below:
https://brainly.com/question/15172156
#SPJ11
6 →
If an object goes from 30 to 25 degrees Celcius, what is the change in Temperature?
7
How much energy is needed to heat 35 g of gold from 10 to 50 Degrees celcius?
129
40
1806
0. 35
8
Specific heat is.
a
6. The change in temperature is -5°C, which indicates a decrease of 5°C. and 7. The energy needed is 180.6 Joules.
6. To find the change in temperature, you need to subtract the final temperature from the initial temperature:
Change in temperature = Final temperature - Initial temperature
Change in temperature = 25°C - 30°C
Change in temperature = -5°C
The change in temperature is -5°C, which indicates a decrease of 5°C.
7. To calculate the energy needed to heat 35g of gold from 10 to 50°C, you need to use the formula:
Energy = mass × specific heat × change in temperature
The specific heat of gold is 0.129 J/(g·°C). First, find the change in temperature:
Change in temperature = Final temperature - Initial temperature
Change in temperature = 50°C - 10°C
Change in temperature = 40°C
Now, plug in the values into the formula:
Energy = (35g) × (0.129 J/(g·°C)) × (40°C)
Energy = 180.6 J
The energy needed is 180.6 Joules.
For more about energy:
https://brainly.com/question/1932868
#SPJ11