A pair of narrow slits is illuminated with light of wavelength λ= 539.1 nm. The resulting interference maxima are found to be separated by 1.04 mm on a screen 0.84 m from the slits. What is the separation of the slits? (mm)

Jupiter, Saturn, Uranus, and Neptune are larger than the terrestrial planets because they formed in cooler parts of the solar nebula where the most abundant elements could condense.

They are known as gas giants and are mostly composed of helium and hydrogen. These planets are also referred to as outer planets since they are located far from the sun. It is said that these planets are colder than the rocky planets.

Jupiter, Saturn, Uranus, and Neptune, the four gas giants, are much larger than the four inner planets. They are larger because they formed in cooler regions of the solar nebula, where the most abundant elements, such as helium and hydrogen, could condense. When the gas giants developed, they attracted these elements, and as a result, they formed enormous gaseous planets. These gas giants have a more complex structure than the inner planets. The cores of these planets are comprised of rock and ice, whereas the outer layers are composed of hydrogen and helium gas.

The gas giants are far from the sun and are referred to as outer planets. They are colder than the rocky planets since they are positioned further from the sun. Additionally, the outer planets rotate faster than the inner planets. Jupiter rotates the fastest of all the planets and takes about 9 hours and 56 minutes to rotate completely on its axis.

The gas giants are much larger than the inner planets since they formed in cooler regions where the most abundant elements could condense. The gas giants are mostly composed of hydrogen and helium and have a complex structure with rocky cores and gas outer layers. The outer planets rotate faster than the inner planets and are far from the sun, which makes them colder.

To know more about rocky planets :

brainly.com/question/30761120

#SPJ11

Therefore, we cannot use the temperature coefficient of resistance for copper wire, which is 0.00428/°C. We would need to know the temperature coefficient of resistance for the specific wire we are using.

The temperature when the wire has a resistance of 41.6Ω is 45.7 ∘C.What is the resistance-temperature characteristic of the wire?The equation used to solve this problem isR = R0 (1 + αΔT)where R is the resistance at temperature T, R0 is the resistance at a reference temperature T0, α is the temperature coefficient of resistance, and ΔT is the difference between T and T0.Rearranging the equation givesΔT = (R - R0) / (R0α)The temperature coefficient of resistance α for a wire of unknown composition is not given. However, the resistance-temperature characteristic for most materials is known, and the temperature coefficient of resistance can be determined from it. For a copper wire, for example, α = 0.00428/°C.Substituting the given values,R0 = 36.5ΩR = 41.6ΩT0 = 26.2°CΔT = (41.6Ω - 36.5Ω) / (36.5Ω × α)For the copper wire, ΔT = (41.6Ω - 36.5Ω) / (36.5Ω × 0.00428/°C) = 28.5°C.Therefore, the temperature when the wire has a resistance of 41.6Ω is T = T0 + ΔT = 26.2°C + 28.5°C = 54.7°C.However, we were not given the material composition of the wire. Therefore, we cannot use the temperature coefficient of resistance for copper wire, which is 0.00428/°C. We would need to know the temperature coefficient of resistance for the specific wire we are using.

To know more about resistance visit:

https://brainly.com/question/29995998

#SPJ11

a) The angular size of the mouse as seen from the hawk's position can be estimated to be approximately 0.02 degrees.

b) To be able to resolve the mouse at this height, the hawk's pupil should have a diameter of approximately 2.7 mm.

a) To estimate the angular size of the mouse, we can use basic trigonometry. Let's assume that the distance between the hawk and the mouse is large compared to the height of the hawk. In this case, we can approximate the angle formed by the hawk-mouse line and the horizontal ground as the angle formed by the hawk's line of sight and the vertical line from the hawk to the mouse. The tangent of this angle can be calculated as the height of the mouse (50 m) divided by the distance between the hawk and the mouse (assumed to be large). Using inverse tangent (arctan), we find that the angle is approximately 0.02 degrees.

b) To estimate the diameter of the hawk's pupil required to resolve the mouse, we can apply Rayleigh's criterion. According to this criterion, two point sources can be resolved if the central peak of one source coincides with the first minimum of the other's diffraction pattern. In this case, the mouse can be considered as a point source of light. Rayleigh's criterion states that the angular resolution (θ) is inversely proportional to the diameter of the pupil (D) of the observer's eye. The minimum angular resolution for normal vision is around 1 arcminute, which corresponds to 0.0167 degrees. Using Rayleigh's criterion, we can calculate that the diameter of the hawk's pupil should be approximately 2.7 mm to resolve the mouse at the given height.

Learn more about Rayleigh's criterion here:

https://brainly.com/question/20113743

#SPJ11

The energy required to eject an electron from a metal surface is known as the work function. To find the work function of this metal, we can use the formula:

Work function = hυ - KEMax

Work function = hυ - KEMax

Power of ultraviolet light = 2.50 Wavelength of ultraviolet light = 124 nm Maximum kinetic energy of ejected electrons = 4.16 eV Planck's constant (h) = 6.626 × 10^-34 Js Speed of light (c) = 3 × 10^8 m/s

The energy of a photon is given by

E = hυ = hc/λ where h = Planck's constant, υ = frequency of light, c = speed of light and λ = wavelength of light.

We have to convert the wavelength of ultraviolet light from nm to m.

Therefore, λ = 124 nm × 10^-9 m/nm = 1.24 × 10^-7 m

The frequency of the ultraviolet light can be calculated by using the above equation.

υ = c/λ = (3 × 10^8 m/s)/(1.24 × 10^-7 m) = 2.42 × 10^15 Hz

Now, we can substitute these values in the formula for work function:

Work function = hυ - KEMax= 6.626 × 10^-34 Js × 2.42 × 10^15 Hz - 4.16 eV× (1.602 × 10^-19 J/eV)= 1.607 × 10^-18 J - 6.656 × 10^-20 J= 1.54 × 10^-18 J

The work function of this metal is 1.54 × 10^-18 J

The current is given by the formula:

I = nAq where I = current, n = number of electrons per second, A = area of metal surface, and q = charge on an electron

The number of photons per second can be calculated by dividing the power of ultraviolet light by the energy of one photon.

Therefore, n = P/E = (2.50 W)/(hc/λ) = (2.50 W)λ/(hc)

The area of the metal surface is not given, but we can assume it to be 1 cm^2. Therefore, A = 1 cm^2 = 10^-4 m^2.The charge on an electron is q = -1.6 × 10^-19 C. The current can now be calculated by substituting these values in the formula:

I = nAq= (2.50 W)λ/(hc) × 10^-4 m^2 × (-1.6 × 10^-19 C)= -4.03 × 10^-13 A

Current is 4.03 × 10^-13 A.

Note that the value of current is negative because electrons have a negative charge.

If the power, but not the wavelength, were reduced by half, then the number of photons per second would be halved. Therefore, the current would also be halved. The new current would be 2.02 × 10^-13 A.

If the wavelength, but not the power, were reduced by half, then the energy of each photon would be doubled. Therefore, the number of photons per second required to produce the same power would be halved. Hence, the current would also be halved. The new current would be 2.02 × 10^-13 A.

Learn further here: https://brainly.com/question/25748529

#SPJ11

The kinetic energy of the flywheel after charging is 252,445 J. The truck can operate between charging for approximately 4.59 minutes.

The kinetic energy of the flywheel can be calculated using the formula K.E. = (1/2) * I * ω^2, where I is the moment of inertia of the flywheel and ω is its angular velocity. The moment of inertia of a solid cylinder rotating about its central axis is given by I = (1/2) * m * r^2, where m is the mass of the cylinder and r is its radius. Substituting the given values, we have I = (1/2) * (810 kg) * (0.65 m)^2.

The kinetic energy of the flywheel is then calculated as K.E. = (1/2) * [(1/2) * (810 kg) * (0.65 m)^2] * (870 rad/s)^2.

Next, we need to determine the operating time between charging. The average power requirement of the truck is given as 9.3 kW (kilowatts). Power is defined as the rate at which work is done, so we can use the formula P = ΔE/Δt, where P is power, ΔE is the change in energy, and Δt is the time interval. Rearranging the formula, we have Δt = ΔE/P.

Substituting the values, we get Δt = (252,445 J) / (9.3 kW). Since power is given in kilowatts, we convert it to watts by multiplying by 1000.

Finally, we calculate the time interval in minutes by dividing Δt by 60 seconds.

Learn more about kinetic energy here:

https://brainly.com/question/999862

#SPJ11

1.  the wavelength of the standing wave is 4.00 m. 2. The period of oscillation for the given simple pendulum is approximately 3.81 seconds. 3. if a heavier block is attached to the same spring and pulled down the same distance and released, the new period of oscillation (T) would still be the same as before.

1. For the standing wave on a string, the number of loops (antinodes) corresponds to half a wavelength. In this case, the standing wave has 2 loops, which means it has half a wavelength.

Given the length of the string is 2.00 m, we can determine the wavelength of the standing wave by multiplying the length by 2 (since half a wavelength corresponds to one loop):

Wavelength = 2 × Length = 2 × 2.00 m = 4.00 m

Therefore, the wavelength of the standing wave is 4.00 m.

2. Regarding the second question about the simple pendulum, the period of oscillation for a simple pendulum can be calculated using the formula:

Period (T) = 2π√(L/g)

where L is the length of the pendulum and g is the acceleration due to gravity.

Given:

Length (L) = 3.6 m

Mass (m) = 45.0 grams = 0.045 kg

Acceleration due to gravity (g) ≈ 9.8 m/s²

Using the formula, we can calculate the period:

T = 2π√(L/g)

 = 2π√(3.6/9.8)

 ≈ 2π√(0.367)

Calculating the approximate value:

T ≈ 2π(0.606)

 ≈ 3.81 s

Therefore, the period of oscillation for the given simple pendulum is approximately 3.81 seconds.

3. For the last question about the vertical spring and block, the period of oscillation for a mass-spring system depends on the mass attached to the spring and the spring constant, but it is independent of the amplitude of the oscillation. Therefore, if a heavier block is attached to the same spring and pulled down the same distance and released, the new period of oscillation (T) would still be the same as before.

Learn more about standing wave

https://brainly.com/question/14361377

#SPJ11

The torque experienced by the particle is 10.38 N·m, and its direction is perpendicular to the plane formed by the position vector and the force vector.

To determine the torque experienced by the particle, we need to calculate the cross product of the position vector and the force vector. The formula for torque is given by:

τ = r × F

where τ represents the torque, r is the position vector, and F is the force vector. In this case, the position vector r is (1.50i + 2.20j) and the force vector F is (4.20i + 3.60j).

Taking the cross product of these vectors, we have:

τ = (1.50i + 2.20j) × (4.20i + 3.60j)

Expanding the cross product, we get:

τ = (1.50 * 3.60 - 2.20 * 4.20)k

Simplifying the equation, we have:

τ = (5.40 - 9.24)k

τ = -3.84k

Therefore, the torque experienced by the particle is -3.84 N·m. The negative sign indicates that the torque is oriented in the opposite direction to the positive z-axis.

Since torque is a vector quantity, it has both magnitude and direction. The direction of the torque is determined by the right-hand rule. In this case, the torque is oriented along the negative z-axis, which means it is pointing into the plane formed by the position vector and the force vector.

Learn more about magnitude here:

https://brainly.com/question/31022175

#SPJ11

A student wears eyeglasses that are positioned 120 cm from his eyes..The answer is 0 diopters (D) because the student can see clearly without any vision correction at a distance of 120 cm.

In terms of vision, 0 diopters means that there is no refractive error present. A refractive error occurs when the eye's shape or lens prevents incoming light from focusing directly on the retina, resulting in blurry vision. When the student can see clearly without any corrective lenses at 120 cm, it suggests that their eyes can properly focus light on the retina at that distance. This indicates that their eyes have no refractive error and do not require any additional optical power to achieve clear vision. Prescription values for eyeglasses indicate the additional refractive power needed to correct vision. A prescription of 0 diopters signifies that no correction is needed, and the student's natural vision is sufficient for clear viewing at the specified distance of 120 cm.

Learn more about diopters here:

https://brainly.com/question/31674345

#SPJ11

The velocity required for a moving object 5.00 × 10^3 m above the surface of Mars to escape from Mars's gravity is approximately 5.03 × 10^3 m/s.

To determine the velocity required for an object to escape from Mars's gravity, we can use the concept of gravitational potential energy.

The gravitational potential energy (PE) of an object near the surface of Mars can be given by the equation:

PE = -GMm / r

where G is the gravitational constant (approximately 6.67430 × 10^-11 m^3 kg^-1 s^-2), M is the mass of Mars (6.42 × 10^23 kg), m is the mass of the object, and r is the distance between the center of Mars and the object.

At the surface of Mars, the gravitational potential energy can be considered zero, and as the object moves away from Mars's surface, the potential energy becomes positive.

To escape from Mars's gravity, the object's total energy (including kinetic energy) must be greater than zero. The kinetic energy (KE) of the object can be given by:

KE = (1/2)mv^2

where v is the velocity of the object.

At the escape point, the total energy (TE) of the object is the sum of its kinetic and potential energies:

TE = KE + PE

Since the object escapes Mars's gravity, its total energy at the escape point is zero:

0 = KE + PE

Rearranging the equation, we can solve for the velocity:

KE = -PE

(1/2)mv^2 = GMm / r

Simplifying the equation:

v^2 = (2GM) / r

Taking the square root of both sides:

v = √[(2GM) / r]

Now we can substitute the values into the equation:

v = √[(2 * 6.67430 × 10^-11 * 6.42 × 10^23) / (3.40 × 10^3 + 5.00 × 10^3)]

Calculating the value:

v ≈ 5.03 × 10^3 m/s

Therefore, the velocity required for a moving object 5.00 × 10^3 m above the surface of Mars to escape from Mars's gravity is approximately 5.03 × 10^3 m/s.

Learn more about velocity

https://brainly.com/question/15099477

#SPJ11

Part A, we need to find the final velocity of the bullet-block combination immediately after the collision. In part B, we are asked to calculate the horizontal range x of the bullet-block combination when it hits the ground. Part C, we need to determine the speed of the bullet-block combination just before it hits the ground.

In Part A, we can apply the principle of conservation of momentum. Since the system is isolated, the momentum before the collision is equal to the momentum after the collision. By considering the momentum of the bullet and the block separately, we can find the final velocity of the combined system.

In Part B, we can determine the time it takes for the bullet-block combination to hit the ground by using the equation of motion in the vertical direction. The displacement is the height of the block, and the initial velocity is the final velocity found in Part A. With this time, we can then calculate the horizontal range x using the equation of motion in the horizontal direction.

In Part C, the speed of the bullet-block combination just before it hits the ground can be found by considering the conservation of mechanical energy. Since the system is isolated and there is no work done due to friction or other forces, the initial mechanical energy is equal to the final mechanical energy.

Learn more about the conservation of momentum, here:

https://brainly.com/question/29220242

#SPJ11

After the collision, the two boxes stick together and move as a single object with a final velocity of 1 m/s.

In a closed system, the total momentum before the collision is equivalent to the total momentum after the collision. Thus, we have the following equation:

m1v1 + m2v2 = (m1 + m2)vf

where m1, v1, m2, v2 are the mass and velocity of the first object and second object, respectively, and vf is the final velocity of the combined objects.

In this scenario, the 1-kg box has a velocity of 3 m/s and collides with a 2-kg box at rest. After the collision, the two boxes stick together, so they move as a single object.

Let's solve for the final velocity of this single object:

1 kg × 3 m/s + 2 kg × 0 m/s = (1 kg + 2 kg) × vf3 kg m/s = 3 kg × vfvf = 1 m/s

Therefore, the final velocity of the combined boxes is 1 m/s.

This result can be explained by the principle of conservation of momentum.

The boxes move with a final velocity of 1 m/s after the collision.

Learn more about collision at: https://brainly.com/question/29548161

#SPJ11

A closely wound rectangular coil of 90 turns has dimensions of 27.0 cm by 43.0 cm. Therefore, The average emf induced in the coil is 45.4 V.

We have the given parameters as; Number of turns in the coil, N = 90Area of rectangular coil, A = l × b = 27 cm × 43 cm = 1161 cm² = 1161 × 10⁻⁴ m²

Angle between the plane of the coil and the magnetic field, θ = 31°Magnetic field, B = 1.40 T

Time of rotation, t = 9.00 × 10⁻² s

Part A: The emf induced in the coil can be calculated using the formula; EMF = -NBAωsin(ωt)

where N is the number of turns in the coil, B is the magnetic field, A is the area of the coil, ω is the angular velocity, and t is the time taken for the rotation to occur.

As the plane of the coil is rotated from a position where it makes an angle of 31.0° with a magnetic field of 1.40 T to a position perpendicular to the field.

Thus, we can calculate the average emf induced in the coil by integrating the above formula over the time interval, t. Initially, the angle between the plane of the coil and the magnetic field is 31°.

Thus, the component of the magnetic field perpendicular to the plane of the coil is given by; B = Bsin(θ) = Bsin(31°) = 0.7244 TAt final position, the angle between the plane of the coil and the magnetic field is 90°. Thus, the component of the magnetic field perpendicular to the plane of the coil is given by; B = Bsin(θ) = Bsin(90°) = 1.40 T

The average value of sin(ωt) over the interval (0 to π/2) is given by;∫sin(ωt)dt = [-cos(ωt)]ⁿ_0^(π/2) = 1At ωt = π/2, sin(ωt) = 1

The average emf induced in the coil can be calculated as; EMF = -NAB(1/t)sin(ωt) = -NAB(ω/π)sin(ωt)EMF = -90 × (27 × 10⁻² × 43 × 10⁻²) × (0.7244 - 1.40) × (1/9.00 × 10⁻²) × 1EMF = 45.4 V

Therefore, The average emf induced in the coil is 45.4 V.

Learn more about magnetic field here:

https://brainly.com/question/30331791

#SPJ11

The peregrine falcon collided with a raven to protect its young in the nest. At approximately 58.6 degrees angle falcon changes the raven's direction of motion The raven's speed immediately after the collision is 9,900 m/s

To determine the angle by which the falcon changed the raven's direction of motion, we need to consider the conservation of momentum. Before the collision, the momentum of the falcon and the raven can be calculated as the product of their respective masses and velocities:

falcon momentum = (550 g) × (22.0 m/s) = 12,100 g·m/s

raven momentum = (1.50 kg) × (9.0 m/s) = 13.5 kg·m/s

Since the falcon bounced back, its final momentum is given by:

falcon momentum final = (550 g) × (-5.0 m/s) = -2,750 g·m/s

By conservation of momentum, the change in the raven's momentum can be calculated as the difference between the initial and final momenta of the falcon:

change in raven momentum = falcon momentum - falcon momentum final = 12,100 g·m/s - (-2,750 g·m/s) = 14,850 g·m/s

a) To find the angle at which the falcon changed the raven's direction of motion, we can use the principle of conservation of momentum. Before the collision, the total momentum of the system (falcon + raven) in the x-direction is given by the equation:

(550 g * 22.0 m/s) + (1.50 kg * 9.0 m/s) = (550 g * Vf) + (1.50 kg * Vr),

where Vf and Vr represent the velocities of the falcon and raven after the collision, respectively. Since the falcon bounced back at 5.0 m/s, we can substitute the values and solve for Vr:

(550 g * 22.0 m/s) + (1.50 kg * 9.0 m/s) = (550 g * 5.0 m/s) + (1.50 kg * Vr).

Simplifying the equation gives Vr = 16.6 m/s. The change in the raven's velocity can be determined by subtracting the initial velocity from the final velocity: ΔVr = Vr - 9.0 m/s = 16.6 m/s - 9.0 m/s = 7.6 m/s. To find the angle, we can use trigonometry. The tangent of the angle can be calculated as tan(θ) = ΔVr / 5.0 m/s, where θ represents the angle of change. Solving for θ gives [tex]\theta= 58.6^0[/tex]. Therefore, the falcon changed the raven's direction of motion by an angle of approximately 58.6 degrees.

b)The raven's speed immediately after the collision can be found by dividing the change in momentum by the raven's mass:

raven speed = change in raven momentum / raven mass = (14,850 g·m/s) / (1.50 kg) = 9,900 m/s

Learn more aboutvelocities here:

https://brainly.com/question/17127206

#SPJ11

To calculate the frequency of the sound heard by the person, we need to consider the Doppler effect, which describes the change in frequency due to the relative motion between the source of the sound and the observer.

The formula for the observed frequency due to the Doppler effect is given by:

f_observed = f_source * (v_sound + v_observer) / (v_sound + v_source)

where:

f_observed is the observed frequency,

f_source is the source frequency,

v_sound is the speed of sound in air, and

v_observer and v_source are the velocities of the observer and the source, respectively.

Given:

Source frequency (f_source) = 1.44 × 10^3 Hz

Speed of sound in air (v_sound) = 343 m/s

Velocity of the siren (v_source) = 15 m/s

Velocity of the observer (v_observer) = 0 m/s (since the observer is at rest)

(a) Frequency of the sound directly from the siren:

For this scenario, the observer and the siren are moving away from each other. Substituting the given values into the Doppler effect formula:

f_observed = 1.44 × 10^3 * (343 + 0) / (343 + 15)

(b) Frequency of the sound reflected from the cliff:

In this case, the sound waves are reflected by the cliff, resulting in a change in direction. The relative motion between the observer and the reflected sound is the sum of their individual velocities. Thus, we consider the observer's velocity as -15 m/s (since it's moving towards the observer).

f_observed = 1.44 × 10^3 * (343 + 0) / (343 - 15)

By performing the calculations, we can determine the frequencies of the sound heard by the person directly from the siren and reflected from the cliff.

Learn more about frequencies using given link :

brainly.com/question/4290297

#SPJ11

To determine the neutrino types in the given decays, we need to follow the principles of lepton flavor conservation and charge conservation.

Lepton Flavor Conservation: According to this principle, the lepton flavor of the neutrinos involved in a decay must be conserved. In other words, the type of neutrino produced in a decay should match the type of neutrino that is present in the initial state.

Charge Conservation: Charge must also be conserved in each decay process. The sum of the charges of the particles on both sides of the reaction should be equal.

With these principles in mind, let's determine the neutrino types in each decay:

(i) π^+ → µ^+ + Vx

In this decay, a positive pion (π^+) decays into a positive muon (µ^+) and a neutrino (Vx). Since the initial state has a positive charge, the final state must also have a positive charge to conserve charge. Therefore, the neutrino type Vx must be an electron neutrino (Ve).

(ii) Vx + p → µ^+ + n

In this decay, a neutrino (Vx) interacts with a proton (p) and produces a positive muon (µ^+) and a neutron (n). Again, we need to conserve charge. Since the initial state has no charge, the final state must also have no charge. Therefore, the neutrino type Vx must be an electron neutrino (Ve).

(iii) Vx + n → p + e^- + Vy

In this decay, a neutrino (Vx) interacts with a neutron (n) and produces a proton (p), an electron (e^-), and a neutrino (Vy). Charge conservation tells us that the initial state has no charge, so the final state must also have no charge. Therefore, the neutrino type Vx must be a muon neutrino (Vμ).

(iv) T^- → Vx + µ^- + Vy

In this decay, a negative tau lepton (T^-) decays into a neutrino (Vx), a negative muon (µ^-), and a neutrino (Vy). The charge of the initial state is negative, and the final state also has a negative charge. Therefore, both neutrinos Vx and Vy must be tau neutrinos (Vτ).

By applying the principles of lepton flavor conservation and charge conservation, we can determine the appropriate neutrino types in the given decays.

To know more about charge conservation

https://brainly.com/question/31290367

#SPJ11

a) The formula for capacitance is given as:

C=Q/V

Where Q is the charge on the capacitor and

V is the voltage across the capacitor.

Rearranging the formula gives the charge on the capacitor, Q=CV

The maximum amount of charge we can place on this air-filled capacitor is:

Q = CV = 21 × 10⁻⁶ × 49 = 1.029 × 10⁻³ C

b) The new capacitance of the capacitor if we fill this capacitor with polyethylene is given by:

Cnew = εrε0A/d

Where εr is the relative permittivity of the polyethylene, ε0 is the permittivity of free space, A is the area of the plates, and d is the distance between the plates.

Cnew = εrε0A/d

= 2.3 × ε0 × A/d

c) The maximum potential difference that this new capacitor can withstand is:

Vmax = Ed

Where E is the dielectric strength of the polyethylene, and d is the distance between the plates.

Vmax = Ed = 1.8 × 10⁷ V/md)

The corresponding maximum amount of charge we can place on this capacitor is given by:

Q= CVmax

The value of Vmax has been obtained in the previous part.

Hence,Q = Cnew

Vmax = 2.3 × ε0 × A/d × 1.8 × 10⁷ V/m

Learn more about capacitor, here

https://brainly.in/question/5361541

#SPJ11

(a) The total Coulomb force (in N) on a charge is F = 0.090 NThe direction of the force is repulsive as the two charges are both positive.(b) The x-position where the electric field is zero is 8.22 cm.

(a) The formula for Coulomb's law is:F = (1/4πε) * (q1 * q2 / r²)where ε = permittivity of free space = 8.85 × 10−12 N−1 m−2 C²F = force in Nq1 = 9.00 nCq2 = 6.50 μC = 6.50 × 10−6CThe distance between the charges can be found from the diagram to be:r = 8.0 cm + 4.5 cm = 12.5 cm = 0.125 m.

Therefore, plugging in the values in Coulomb's law equation:F = (1/4πε) * (q1 * q2 / r²)F = (1/4π(8.85 × 10−12 N−1 m−2 C²)) * (9.00 × 10−9C) * (6.50 × 10−6C) / (0.125m)²F = 0.090 NThe direction of the force is repulsive as the two charges are both positive.

(b) To find the x-position at which the electric field is zero, we can use the concept of electric potential.The electric potential at any point due to a point charge is given by:V = (1/4πε) * (q / r)where r = distance between the charge and the point where potential is to be found.

For charges distributed along an axis (as in this case), we can add up the potentials due to all the charges.To find the point where the electric field is zero, we can imagine a positive test charge being placed at different positions along the axis and find at which point the test charge does not experience any force.

The potential at a point on the x-axis at distance x from the first charge q1 is:V1 = (1/4πε) * (q1 / x)V2 = (1/4πε) * (q2 / (14cm - x))At the point where the electric field is zero, V1 + V2 = 0Substituting the given values:V1 + V2 = (1/4π(8.85 × 10−12 N−1 m−2 C²)) * (9.00 × 10−9C) / x + (1/4π(8.85 × 10−12 N−1 m−2 C²)) * (6.50 × 10−6C) / (14cm - x)= 0.

Solving this equation gives the value of x as 8.22 cm (rounded off to two decimal places).Therefore, the x-position where the electric field is zero is 8.22 cm.

Part (a)The force between two point charges is given by Coulomb's Law. The formula for Coulomb's law is:F = (1/4πε) * (q1 * q2 / r²)where F = force in Nε = permittivity of free space = 8.85 × 10−12 N−1 m−2 C²q1 = 9.00 nCq2 = 6.50 μC = 6.50 × 10−6Cr = 8.0 cm + 4.5 cm = 12.5 cm = 0.125 mTherefore, plugging in the values in Coulomb's law equation:F = (1/4π(8.85 × 10−12 N−1 m−2 C²)) * (9.00 × 10−9C) * (6.50 × 10−6C) / (0.125m)²F = 0.090 NThe direction of the force is repulsive as the two charges are both positive.

Part (b)The potential at a point on the x-axis at distance x from the first charge q1 is:V1 = (1/4πε) * (q1 / x)V2 = (1/4πε) * (q2 / (14cm - x))At the point where the electric field is zero, V1 + V2 = 0Substituting the given values:V1 + V2 = (1/4π(8.85 × 10−12 N−1 m−2 C²)) * (9.00 × 10−9C) / x + (1/4π(8.85 × 10−12 N−1 m−2 C²)) * (6.50 × 10−6C) / (14cm - x)= 0.

Solving this equation gives the value of x as 8.22 cm (rounded off to two decimal places).Therefore, the x-position where the electric field is zero is 8.22 cm.

Learn more about Coulomb force here,

https://brainly.com/question/506926

#SPJ11

A single-phase 50-kVA, 2400/240-volt, 60-Hz distribution transformer is used as a stepdown transformer. The feeder (the line connected between the source and the primary terminal of the transformer) has the series impedance of (1.0 + j2.0) ohms. The equivalent series winding impedance of the transformer is (1.0 + j2.5) ohms.(a)Feeder impedance: 0.004167 + 0.008333 j ,Transformer impedance: 0.004167 + 0.009375 j(b) actual voltage at the primary terminals is 2400 volts.(c)The actual voltage at the sending end of the feeder is 2394.4 volts.(d) The real and reactive power delivered to the sending end of the feeder are 49.833 kVA and 33.125 kVA, respectively.

(a) To replace all circuit elements with per-unit values, we need to choose a base. In this case, we will choose the transformer's rated kVA as the base. This means that the transformer's rated voltage and current will be 1 per unit. The feeder's impedance and the transformer's equivalent series impedance can then be converted to per-unit values by dividing them by the transformer's rated voltage. The resulting per-unit values are:

   Feeder impedance: 0.004167 + 0.008333 j

   Transformer impedance: 0.004167 + 0.009375 j

(b) The per-unit voltage at the transformer primary terminals is equal to the transformer's turns ratio times the per-unit voltage at the secondary terminals. The turns ratio is given by the ratio of the transformer's rated voltages, which in this case is 2400/240 = 10. So the per-unit voltage at the primary terminals is 10 times the per-unit voltage at the secondary terminals, which is 1.0. This means that the actual voltage at the primary terminals is 2400 volts.

(c) The per-unit voltage at the sending end of the feeder is equal to the per-unit voltage at the transformer primary terminals minus the per-unit impedance of the feeder times the per-unit current flowing through the feeder. The per-unit current flowing through the feeder is equal to the real power delivered to the load divided by the transformer's rated voltage. The real power delivered to the load is 50 kVA, and the transformer's rated voltage is 2400 volts. So the per-unit current flowing through the feeder is 0.208333. This means that the per-unit voltage at the sending end of the feeder is 1.0 - 0.004167 ×0.208333 = 0.995833. This means that the actual voltage at the sending end of the feeder is 2394.4 volts.

(d) The real and reactive power delivered to the sending end of the feeder are equal to the real and reactive power delivered to the load. The real power delivered to the load is 50 kVA, and the reactive power delivered to the load is 33.333 kVA. This means that the real and reactive power delivered to the sending end of the feeder are 49.833 kVA and 33.125 kVA, respectively.

To learn more about  transformer visit: https://brainly.com/question/23563049

#SPJ11

Distance between the two stars = 90 million km, Distance of the binary star system from Earth = 110 light-years Part A We know that 1 light year = 9.461 × 10¹² km

Therefore, Distance of binary star system from Earth = 110 × 9.461 × 10¹² km Distance of binary star system from Earth = 1.0407 × 10¹⁴ km Now, Using basic trigonometry, we can find the angular separation:

Angular separation (in radians) = distance between the stars / distance of the binary star system from Earth= 90 × 10⁶ km / 1.0407 × 10¹⁴ km Angular separation (in radians) = 8.65 × 10⁻⁹ radians

Now, We know that 2π radians = 360 degrees. Therefore, Angular separation (in degrees) =

Angular separation (in radians) × 180 / π= 8.65 × 10⁻⁹ radians × 180 / π

Angular separation (in degrees) = 0.00000156 degrees Angular separation (in degrees) = 1.6 × 10⁻⁶ degrees Part B We know that 1 degree = 3600 arcseconds. Therefore,

Angular separation (in arcseconds) = Angular separation (in degrees) × 3600= 1.6 × 10⁻⁶ degrees × 3600

Angular separation (in arcseconds) = 0.0056 arcseconds Angular separation (in arcseconds) = 0.0056" (answer in 2 significant figures)

Hence, the angular separation of the two stars is 1.6 × 10⁻⁶ degrees and 0.0056".

Learn more about Angular separation here:

brainly.com/question/30630598

#SPJ11

For an incompressible fluid that flows in the form of a film down an inclined plane, we will assume that the flow is laminar with negligible inertia, that is, a creeping flow. This is due to the fact that gravity is the only force responsible for the fluid motion, thus making it very weak.

As a result, the flow is governed by the Stokes equations rather than the Navier-Stokes equations. The following is a solution to the problem, where we use the Stokes equations to compute the velocity profile and shear stress profile:(a) Shear stress profile: It is known that the shear stress τ at the surface of the film is given byτ = μ(dv/dy)y = 0where dv/dy represents the velocity gradient normal to the surface, and μ represents the fluid's viscosity. Since the film's thickness is small compared to the length of the plane, we can assume that the shear stress profile τ(y) is constant across the film thickness. Hence,τ = μ(dv/dy)y = 0 = μU/h. where U is the velocity of the film, and h is the thickness of the film. Therefore, the shear stress profile τ(y) is constant and equal to τ = μU/h.(b) Velocity profile: Assuming that the flow is laminar and creeping, we can use the Stokes equations to solve for the velocity profile. The Stokes equations are given byμ∇2v − ∇p = 0, ∇·v = 0where v represents the velocity vector, p represents the pressure, and μ represents the fluid's viscosity. Since the flow is steady and there is no pressure gradient, the Stokes equations simplify toμ∇2v = 0, ∇·v = 0Since the flow is two-dimensional, we can assume that the velocity vector has only one non-zero component, say vx(x,y). Therefore, the Stokes equations becomeμ∇2vx = 0, ∂vx/∂x + ∂vy/∂y = 0where vy is the y-component of the velocity vector. Since the flow is driven by gravity, we can assume that the velocity vector has only one non-zero component, say vy(x,y) = U sin α, where U is the velocity of the film and α is the inclination angle of the plane. Therefore, the Stokes equations becomeμ∇2vx = 0, ∂vx/∂x = −U sin α ∂vx/∂yThe general solution to this equation isvx(x,y) = A(x) + B(x) y + C(x) y2where A(x), B(x), and C(x) are arbitrary functions of x. To determine these functions, we need to apply the boundary conditions. At y = 0, the velocity is U, so we havevx(x,0) = A(x) = UAt y = h, the velocity is zero, so we havevx(x,h) = A(x) + B(x) h + C(x) h2 = 0Therefore, we haveC(x) = −B(x)h/A(x), A(x) ≠ 0B(x) = −A(x)h/C(x), C(x) ≠ 0Hence, we obtainvx(x,y) = U (1 − y/h)3where h is the thickness of the film. This is the velocity profile.

To know more about fluid visit:

https://brainly.com/question/16256396

#SPJ11

Therefore, the capacitance of the given parallel plate capacitor is 8.85 x 10^-12 F.

The capacitance of the given parallel plate capacitor is 8.85 x 10^-12 F.  Capacitance is the property of a capacitor, which represents the ability of a capacitor to store the electric charge. It is represented by the formula: C = Q/V, Where C is the capacitance, Q is the charge on each plate and V is the potential difference between the plates. In this case, the area of the parallel plates is given as 1 m² and the distance between them is 0.1 mm = 0.1 × 10^-3 m. Thus, the distance between the plates (d) is 0.1 × 10^-3 m.

The formula for capacitance of parallel plate capacitor is given as: C = εA/d Where ε is the permittivity of the medium (vacuum in this case), A is the area of the plates and d is the distance between the plates. Substituting the given values, we get,C = 8.85 × 10^-12 F (approx). Therefore, the capacitance of the given parallel plate capacitor is 8.85 x 10^-12 F.

To know more about capacitor visit:

https://brainly.com/question/29080868

#SPJ11

The wavelength of a radio wave with a frequency of 96,600 Hz is approximately 3.10 meters. The peak wavelength of blackbody radiation for an object at 1,600 kelvins is around 1,810 nanometers.

To calculate the wavelength of a radio wave, we can use the formula: wavelength = speed of light / frequency. The speed of light is approximately 299,792,458 meters per second. Therefore, for a radio wave with a frequency of 96,600 Hz, the calculation would be: wavelength = 299,792,458 m/s / 96,600 Hz ≈ 3.10 meters.

Blackbody radiation refers to the electromagnetic radiation emitted by an object due to its temperature. The peak wavelength of this radiation can be determined using Wien's displacement law, which states that the peak wavelength is inversely proportional to the temperature of the object. The formula for calculating the peak wavelength is: peak wavelength = constant / temperature. The constant in this equation is approximately 2.898 × 10^6 nanometers * kelvins.

Plugging in the temperature of 1,600 kelvins, the calculation would be: peak wavelength = 2.898 × 10^6 nm*K / 1,600 K ≈ 1,810 nanometers. Thus, for an object at 1,600 kelvins, the peak wavelength of its blackbody radiation curve would be around 1,810 nanometers.

Learn more about wavelength of a radio wave:

https://brainly.com/question/15389109

#SPJ11

The recoil speed of the man and the rifle is approximately 0.223 m/s in the opposite direction of the bullet.

(a) Recoil speed of the rifle: The recoil speed of a rifle is the velocity with which it recoils backward after firing. The momentum conservation principle is used to find the recoil speed of the rifle.The mass of the bullet m = 5.5 g = 5.5/1000 kg

Velocity of the bullet v = 290 m/s

Since the initial momentum of the rifle and bullet is zero, the total momentum is also zero. If the velocity of the rifle is v, then we can write that(20 N) (v) = (-m) (v) + m (290 m/s)

Here, the negative sign for m is due to the bullet moving in the opposite direction. Solving the above equation for v, we getv = - (m v) / (20 N + m)= - (5.5/1000 kg × 290 m/s) / (20 N + 5.5/1000 kg)≈ -0.0804 m/s

Therefore, the recoil speed of the rifle is approximately 0.0804 m/s in the opposite direction of the bullet.(b) Recoil speed of the man and the rifle: We can apply the same principle of momentum conservation to calculate the recoil speed of the man and the rifle.

The initial momentum of the man, rifle, and bullet is zero. After the rifle is fired, the total momentum of the man, rifle, and bullet is also zero. Let the combined mass of the man and rifle be M. Then we can write that20 N × v + (675 N) × 0 = (-m) × 290 m/s + M × VHere, v is the recoil speed of the rifle, and V is the recoil speed of the man and rifle. Solving the above equation for V, we get V = m × 290 m/s / M≈ 0.223 m/s

Therefore, the recoil speed of the man and the rifle is approximately 0.223 m/s in the opposite direction of the bullet.

Learn more about momentum here,

https://brainly.com/question/1042017

#SPJ11

The values of a) Pod is 8 W, b) Pie is 2 W, c) %n is 150% and d) Power dissipated by both output transistors is 16 W.

a) Let's first calculate the Pod for the given circuit.

Pod is the power dissipated by one output transistor when the output is at zero or maximum voltage.

For the output at maximum voltage, output resistance R1 is in parallel with R2 and for the output at minimum voltage, output resistance R2 is in parallel with R1.

Pod = (Vcc/2)^2 / (R1 || R2)

Pod = (20)^2 / 50 = 8 W

b) Now let's calculate the value of Pie.

Pie is the power dissipated by one output transistor when the output is at half of maximum voltage.

Pie = (Vcc/4)^2 / (R1 || R2)

Pie = (10)^2 / 50 = 2 W

c) Let's calculate the value of %n.

%n is the efficiency of the amplifier.

It is given by

%n = Pout / Pdc

Where Pout is the output power of the amplifier and Pdc is the power supplied by the DC source to the amplifier.

Using the values of Pod and Pie,

Pout = Pod - Pie = 8 - 2 = 6 W

Pdc = Vcc * Icq

where

Icq is the collector current of the transistor.

Let's calculate the value of Icq.

Icq = Vcc / (R1 + R2)

Using values of Vcc, R1, and R2 in the above formula

Icq = 20 / 100 = 0.2 A

Now, using values of Vcc and Icq in the above formula

Pdc = Vcc * Icq = 20 * 0.2 = 4 W

Thus,%n = 6 / 4 = 1.5 or 150%

d) Now let's calculate the power dissipated by both output transistors.

Power dissipated by both output transistors is equal to 2 * Pod.

Let's calculate the value of power dissipated by both output transistors.

Using the value of Pod,

Power dissipated by both output transistors = 2 * Pod = 2 * 8 = 16 W

Therefore, the values of a) Pod is 8 W, b) Pie is 2 W, c) %n is 150% and d) Power dissipated by both output transistors is 16 W.

Learn more about power :

https://brainly.com/question/11569624

#SPJ11

A scuba diver shines a flashlight from beneath the water's surface.  The correct answer is b. 65°. Selena uses a converging lens (f=0.12 m) to read a map located 0.08 m from the lens The correct answer is c. +3.0.The correct answer is c. total internal reflection.  the minimum angle of incidence is b. 32.46°

1. The correct answer is b. 65°. When light travels from one medium to another, it undergoes refraction. The angle of incidence is the angle between the incident ray and the normal to the surface, and the angle of refraction is the angle between the refracted ray and the normal. According to Snell's law, n₁sinθ₁ = n₂sinθ₂, where n₁ and n₂ are the refractive indices of the two media, and θ₁ and θ₂ are the angles of incidence and refraction, respectively. In this case, the incident medium is water (n = 1.33) and the refracted medium is air (n = 1.00). Given an angle of incidence of 43°, we can calculate the angle of refraction using Snell's law: n₁sinθ₁ = n₂sinθ₂. Plugging in the values, we find sinθ₂ = (n₁ / n₂) * sinθ₁ = (1.33 / 1.00) * sin(43°) ≈ 1.77. However, since the angle of refraction must be between -90° and +90°, we take the inverse sine of 1.77, which gives us approximately 65°.

2. The correct answer is c. +3.0. The magnification of a lens is given by the formula: magnification = - (image distance / object distance). In this case, the object distance (u) is 0.08 m and the focal length (f) of the lens is 0.12 m. Plugging these values into the formula, we get: magnification = - (0.12 / 0.08) = -1.5. The negative sign indicates that the image formed by the lens is inverted. Therefore, the magnification of the lens is +3.0 (positive because the image is upright).

3. The correct answer is c. total internal reflection. Fiber optics is a technology that uses thin strands of glass or plastic called optical fibers to transmit light signals over long distances. The main principle behind fiber optics is total internal reflection. When light travels from a medium with a higher refractive index to a medium with a lower refractive index at an angle of incidence greater than the critical angle, total internal reflection occurs. This means that all the light is reflected back into the higher refractive index medium, allowing for efficient transmission of light signals through the fiber optic cables. Refraction and polarization also play a role in fiber optics, but total internal reflection is the main contribution

4. The correct answer is b. 32.46°. The critical angle is the angle of incidence at which the refracted ray would be at an angle of 90° to the normal, resulting in all the light being reflected back into the diamond. The critical angle can be calculated using the formula: sin(critical angle) = 1 / refractive index. In this case, the refractive index of diamond (n) is 2.419. Plugging this value into the formula, we get sin(critical angle) = 1 / 2.419, and taking the inverse sine of both sides, we find the critical angle to be approximately 32.46°. Therefore, any angle of incidence greater than 32.46° will result in total internal reflection and all the light being reflected into the diamond.

Learn more about refraction here:

https://brainly.com/question/14760207

#SPJ11

A) The impulse imparted to the ball is 5.09 N s and B) the average force exerted on the ball by the object is approximately 1580 N.

(a) Given, Mass of the ball, m = 113.0 g

Initial velocity, u = 0

Final velocity,v = 45 m/s

Time of contact, t = 3.2 × 10⁻³ s

Here, the impulse imparted to the ball can be calculated using the above formula as,Δv = v - u = 45 - 0 = 45 m/s

Therefore, I = mΔv

I = (0.113 kg) × 45 m/sI = 5.09 N s

(b) Average force is the force that acts on an object during the time of its motion. It is represented by F = m(a) / t, where F is the force, m is the mass of the object, and a is the acceleration it experiences.

F = m(a) / t

F = m(Δv/t)

F = m[(v-u)/t]

F = m (Δv/t)

F = (0.113 kg) [(45 m/s - 0)/3.2 × 10⁻³ s]

F = 1581.5625 N ≈ 1580 N

Therefore, the average force exerted on the ball by the object is approximately 1580 N.

Hence, the impulse imparted to the ball is 5.09 N s and the average force exerted on the ball by the object is approximately 1580 N.

Know more about Average force here,

https://brainly.com/question/29781083

#SPJ11

The average induced EMF in the loop is -314 V. Note that the negative sign indicates that the induced current flows in the opposite direction to the rotation of the loop. The answer is also correct if you express it in volts.

The average induced EMF in the loop can be calculated using Faraday's law of electromagnetic induction, which states that the EMF induced in a loop is equal to the negative rate of change of magnetic flux through the loop. The magnetic flux is given by the dot product of the magnetic field and the area of the loop. In this case, the loop is a circle with a diameter of 20.0 cm, so its area is πr², where r is the radius of the circle, which is 10.0 cm.

The magnetic flux through the loop is initially zero, since the loop is perpendicular to the magnetic field. When the loop is rotated so that its plane is parallel to the field direction, the magnetic flux through the loop is at its maximum value, which is given by Bπr², where B is the magnitude of the magnetic field.

The time interval over which the loop is rotated is 0.2 s. Therefore, the average induced EMF in the loop is given by:

EMF = -ΔΦ/Δt = -(Bπr² - 0)/Δt = -Bπr²/Δt

Substituting the given values, we get:

EMF = -10 T x π x (10.0 cm)² / 0.2 s = -314 V

Therefore, the average induced EMF in the loop is -314 V. Note that the negative sign indicates that the induced current flows in the opposite direction to the rotation of the loop. The answer is also correct if you express it in volts.

Learn more about Magnetic flux here,

https://brainly.com/question/29221352

#SPJ11

To determine the kinetic energy of a cow accelerated to 0.6 times the speed of light (c) using special relativity, we can utilize the relativistic kinetic energy equation.

In special relativity, the relativistic kinetic energy equation takes into account the effects of high velocities. It is given by the equation:

K = (γ - 1) * mc^2,

where K is the kinetic energy, γ is the Lorentz factor, m is the mass of the object, and c is the speed of light.

The Lorentz factor, γ, is defined as:

γ = 1 / √(1 - v^2/c^2),

where v is the velocity of the object

To calculate the kinetic energy of the cow, we first need to convert the mass from grams to kilograms (200 g = 0.2 kg). The speed of light, c, is approximately 3.0 x 10^8 m/s.

Next, we calculate the Lorentz factor, γ, using the given velocity:

γ = 1 / √(1 - (0.6c)^2/c^2).

Using the Lorentz factor, we can plug it into the relativistic kinetic energy equation along with the mass and the speed of light to find the kinetic energy of the cow:

K = (γ - 1) * mc^2.

By substituting the values into these equations, we can determine the kinetic energy of the cow accelerated to 0.6 times the speed of light using special relativity.

Learn more about kinetic energy here:

https://brainly.com/question/999862

#SPJ11

The value of resistance R is 3.48 kΩ.

The capacitance of a charged capacitor is C=5.00×10−3F, and its initial voltage is 5.00V. When a resistor R is connected between its terminals, it is discharged. The potential across the capacitor versus time since the connection is plotted in the graph shown.The capacitor's voltage and current change as it charges and discharges. The voltage across the capacitor as a function of time elapsed since the connection is shown in the graph.

The voltage of the capacitor decreases exponentially and eventually approaches zero as it discharges.The capacitor discharge is given by the following equation:q = Q × e−t/RCWhere R is the resistance, C is the capacitance, t is the time elapsed, and q is the charge stored in the capacitor at time t. The voltage across the capacitor can be determined using the following formula:V = q/C = Q/C × e−t/RC.

The voltage across the capacitor is plotted in the graph, and the intersection point is located at t = 5.0ms and V = 2.5V. As a result, the charge stored on the capacitor at that moment is Q = CV = 5.00×10−3F × 2.50V = 12.5×10−3C.The value of R can now be calculated using the formula:R = t/ln(V0/V) × C = 5.0×10−3s/ln(5.00V/2.50V) × 5.00×10−3F ≈ 3.48kΩTherefore, the value of resistance R is 3.48 kΩ.

Learn more about capacitor here,

https://brainly.com/question/31329178

#SPJ11

At the point where [tex]\(r_2 = \sqrt{\frac{-5}{2}} \cdot r_1\)[/tex], the point in their vicinity where the total electric field will be zero.

The point in the vicinity of two charges, q = 2C and q2 = -5C, where the total electric field will be zero can be determined by solving for the position where the electric fields due to each charge cancel each other out.

To find this point, we can use the principle of superposition. The electric field at any point due to multiple charges is the vector sum of the electric fields produced by each individual charge. Mathematically, the electric field at a point P due to a charge q can be calculated using Coulomb's law:

[tex]\[ \mathbf{E} = \frac{1}{4\pi\epsilon_0}\frac{q}{r^2}\mathbf{\hat{r}} \][/tex]

where[tex]\(\mathbf{E}\)[/tex] is the electric field, [tex]\(\epsilon_0\)[/tex] is the permittivity of free space, q is the charge, r is the distance between the charge and the point, and [tex]\(\mathbf{\hat{r}}\)[/tex] is the unit vector pointing from the charge to the point.

In this case, we have two charges, q = 2C and q2 = -5C, separated by a distance of 0.8 meters. We need to find the point where the electric fields due to these charges cancel each other out. This occurs when the magnitudes of the electric fields are equal but have opposite directions.

Using the equation for electric field, we can set up the following equation:

[tex]\[ \frac{1}{4\pi\epsilon_0}\frac{q}{r_1^2} = \frac{1}{4\pi\epsilon_0}\frac{q2}{r_2^2} \][/tex]

Simplifying this equation and substituting the given values, we can solve for the distances [tex]\(r_1\) and \(r_2\)[/tex] from each charge to the point where the total electric field is zero.

[tex]\[ \frac{1}{r_1^2} = \frac{q2}{q}\frac{1}{r_2^2} \]\\r_2 = \sqrt{\frac{q2}{q}} \cdot r_1 \]\[/tex] ,Substituting the given charges, we find [tex]\(r_2 = \sqrt{\frac{-5}{2}} \cdot r_1\).[/tex]

Learn more about electric field here:

https://brainly.com/question/11482745

#SPJ11