Answer:
c
Explanation:
Answer question in the picture
The kinetic energy of the roller coaster car is 40, 914. 08 J.
How to find the Kinetic energy ?The kinetic energy (KE) of a moving object is given by the formula:
KE = ( 1 / 2 ) mv ²
Where m is the mass of the object and v is its velocity.
In this case, the mass of the roller coaster car is 311.11 kg and its velocity is 16.22 m/s. Substituting these values into the formula, we get:
KE = ( 1 / 2 ) ( 311.11 kg )( 16.22 m/s) ²
KE = (0.5) (311.11 kg) ( 263. 02 m ² /s ²)
KE = 40, 914. 08 joules (J)
Find out more on kinetic energy at https://brainly.com/question/25959744
#SPJ1
The force of gravity acting on a satellite points in towards the center of the earth. If gravity is pulling the satellite towards the earth, why does it not fall into the earth?
Answer:
satellites dont fall from the sky
Explanation:
Satellites don’t fall from the sky because they are orbiting Earth. Even when satellites are thousands of miles away, Earth’s gravity still tugs on them. Gravity—combined with the satellite’s momentum from its launch into space—cause the satellite to go into orbit above Earth, instead of falling back down to the ground
How much current would be traveling perpendicular to a 2.90 T magnetic field when a force of 57.80 N is present in an 90.70 meter wire?
A magnetic field is a vector field that explains the magnetic effect on moving charges, currents, and magnetic materials.
What is called magnetic field?The magnetic field is the area around a magnetic material or a moving electric charge where the power of magnetism works. A diagram of the magnetic field that depicts how a magnetic force is spread within and around a magnetic substance.
The region encircling a magnetic dipole or a moving charge generates a magnetic field. The SI measure of field strength for magnetic fields is Tesla (T). The magnetic field is the region around a magnet where one can feel the magnetic pull.
Learn more about Magnetic field, Visit
https://brainly.com/question/14848188
#SPJ1
Question
Which resistors in the circuit are connected in parallel?
www
D
A. B and C
B. A and B
C. C and D
D. A and D
Answer:
DWhich resistors in the circuit are connected in parallel
B and C resistors in the circuit are connected in parallel. Hence option A is correct.
What is a parallel and series combination of resistance?When two or more resistors are connected between two same points, they are said to be connected in parallel combination(as shown in fig). The equivalent resistance is the reciprocal and the sum of reciprocals of all resistance connected in parallel combination.
1/R(p) =1/R₁+1/R₂+1/R₃...........1/Rₙ
where R(p) is the equivalent or total resistance of the circuit.
In parallel combination, same potential difference exists across each resistor. But current through each resistance is different.
When two or more resistors are connected one after other, they are said to be connected in series as shown in figure. in this combination voltage difference across each resistance is different which is given by ohms law. current flowing through each resistance is same.
equivalent resistance for series combination is given by,
R(s) = R₁ + R₂ + R₃...........+R(n).
Hence option A is correct.
To know more about Resistor :
https://brainly.com/question/15522393
#SPJ5.
Compare the force required to loosen the bolt using the 1/4 ratchet compared to 3/8 ratchet or breaker bar.
TO be completely fair here when you put these fractions together 3/8 needs more force then 1/4 as 3/8 is already closer to half of 4 as a fraction aka 2/4
Clouds are made of dense water vapor.
True
False
Answer:
its false
Explanation:
A solid will float in a liquid if it is less dense than the liquid, and sink if it is more dense than the liquid. If the density of seawater is 1.025 g/mL, which types of plastics would definitely float in seawater? JUSTIFY your answer.
Explanation:
Plastics with a density less than or equal to 1.025 g/mL will float in seawater, while plastics with a density greater than 1.025 g/mL will sink.
Here are some examples of plastic densities:
Polyethylene terephthalate (PET) has a density of approximately 1.38 g/mL, so it will sink in seawater.
Polypropylene (PP) has a density of approximately 0.9 g/mL, so it will float in seawater.
High-density polyethylene (HDPE) has a density of approximately 0.95 g/mL, so it will float in seawater.
Polystyrene (PS) has a density of approximately 1.05 g/mL, so it will sink in seawater.
Based on the above examples, we can see that plastics such as polypropylene and high-density polyethylene will definitely float in seawater, while others such as polyethylene terephthalate and polystyrene will definitely sink. Other types of plastics with densities close to 1.025 g/mL may float or sink depending on their exact density and the conditions of the water, such as temperature and salinity.
Miguel is riding a skateboard down the street road 150 m/min. if his velocity remains constant how far will Miguel skate in 3.4 minutes?
The distance travelled by Miguel in a time of 3.4 minutes is 510 m.
What is meant by constant velocity ?An object in motion is said to have constant velocity when the object travels equal displacements in equal intervals of time. That means the velocity is not changing with time.
Here,
The velocity of the skateboard, v = 150 m/min
Time taken by Miguel, t = 3.4 min
So,
The distance travelled by Miguel in 3.4 min is,
s = v x t
s = 150 x 3.4
s = 510 m
Hence,
The distance travelled by Miguel in a time of 3.4 minutes is 510 m.
To learn more about constant velocity, click:
https://brainly.com/question/21261928
#SPJ9
Answer question in picture please
The gravitational force between Saturn and rock with mass 14.58kg, is approximately 1.22 N.
What is the rationale for the above response?To compute the gravitational force between Saturn and a rock with a mass of 14.58kg, we can use the formula for gravitational force:
F = G * (m1 * m2) / r^2
where F is the gravitational force, G is the gravitational constant (6.67430 × 10^-11 N m^2/kg^2), m1 and m2 are the masses of the two objects, and r is the distance between the centers of mass of the two objects.
We need to find the mass of Saturn and the distance between Saturn and the rock. The average radius of Saturn (r_s) is given as 6.03 x 10^7 m.
We can assume that the rock is located on the surface of Saturn, so the distance between the centers of mass of the two objects (r) is the sum of the radius of Saturn and the height of the rock above the surface:
r = r_s + h
where h is the height of the rock above the surface of Saturn. We don't have this value, but we can assume that it is very small compared to the distance from Saturn to the Sun, so we can use the mean distance from the Sun to Saturn (d) as an approximation:
r ≈ d
The mean distance from the Sun to Saturn is given as 1.43 x 10^12 m. Now we have all the values we need to compute the gravitational force:
F = G * (m_saturn * m_rock) / r^2
F = 6.67430 × 10^-11 * (5.96 x 10^26 * 14.58) / (1.43 x 10^12)^2
F = 6.67430 × 10^-11 * (8.706768 x 10^27) / (2.0449 x 10^24)
F = 3.9848358896 x 10^8 N
F ≈ 1.22 N
Therefore, the gravitational force between Saturn and a rock with a mass of 14.58kg is approximately 1.22 N.
Learn more about gravitational force at:
https://brainly.com/question/12528243
#SPJ1
For the circuit shown in the figure, the current in the 8 resistor is 0.50 A, and all quantities are accurate to 2 significant figures. What is the current in the 2 resistor?
The current through the 2Ω resistor is 9.5A
The terminal voltage is 10.8 V
How to calculatea) The voltage V across 8 Ω resistor is V = I*R = 8*0.5 = 4V
the current through 16Ω resistor is then I = V/R = 4/16 = 0.25 A
the current through 20Ω resistor is then I = current through 8Ω resistor + current through 16Ω resistor = 0.75 A
voltage across 20Ω is V = I*R = 0.75*20 = 15 V
the source voltage is Vs = V8 + V20 = 4+15 = 19 V
therefore the current through 2Ω resistor is
I = V/R = 19/2 = 9.5 A
b) The terminal voltage is
Vterminal = VR = I*R = 0.450*24 = 10.8 V
Read more about resistors here:
https://brainly.com/question/24858512
#SPJ1
Two blocks move along a linear path on a nearly frictionless air track. One block, of mass 0.110 kg, initially moves to the right at a speed of 4.60 m/s, while the second block, of mass 0.220 kg, is initially to the left of the first block and moving to the right at 6.90 m/s. Find the final velocities of the blocks, assuming the collision is elastic.
Answer:
The final velocities of the blocks are 3.00 m/s and 8.50 m/s, respectively.
the current in a circuit is 0.59 A. The circuit has two resistors connected in series: one is 110 ohms and the other is 130 ohm. What is the voltage in the circuit?
The voltage in the circuit with current 0.59 A is 141.6 volts.
How to calculate voltage?Resistance R = 110 + 130 = 240 ohm. Given what has just been said G= 0.59 A V= GR V= 0.59 240 V= 141.6 volts When charged electrons (current) are forced through a conducting loop by the pressure of an electrical circuit's power source, they are able to carry out tasks like lighting a lamp. In a nutshell, voltage equals pressure and is measured in volts (V).Electric charge travels past a pokindly int in a circuit at a constant rate called current. In other terms, current is the pace at which an electric charge flows. Voltage, also known as electromotive force, is the potential difference in charge between two locations in an electrical field.For more information on voltage kindly visit to
https://brainly.com/question/13521443
#SPJ9
protons and electrons are similar in that they both have ____ however protons are different in that they _____ and electrons are different in that they ____.
A load of 2kg produce an extension of 1mm in a wire of 3m in length and 1mm in diameter,calculate the young modulus of d wire
A load of 2kg produce an extension of 1mm in a wire of 3m in length and 1mm in diameter, the Young's modulus of the wire is approximately 8.12 × 10^10 Pa.
The Young's modulus (E) is a measure of the stiffness of a material and is defined as the ratio of stress (σ) to strain (ε) in a material under tensile stress.
In this problem, we are given the following information:
Load (F) = 2 kg
Extension (ΔL) = 1 mm
Length of wire (L) = 3 m
Diameter of wire (d) = 1 mm
We need to calculate the Young's modulus (E) of the wire.
The formula for Young's modulus is:
E = (F/A) / (ΔL/L)
where A is the cross-sectional area of the wire.
The cross-sectional area of the wire can be calculated using the formula:
A = πd^2/4
Substituting the given values, we get:
A = π(1 mm)^2/4 = 0.785 mm^2
Now, substituting the values of F, ΔL, L, and A in the formula for Young's modulus, we get:
E = (2 kg/(9.81 m/s^2))/((1 mm/1000)/(3 m)) / 0.785 mm^2
Thus the value is,
E = 8.12 × 10^10 Pa
For such more questions on Young's Modulus :
https://brainly.com/question/12910262
#SPJ11
The specific heat capacity of a substance is the energy needed to raise the temperature of 1 __________ of the substance by 1 __________
The specific heat capacity of a substance is the energy needed to raise the temperature of 1 gram of the substance by 1 degree Celsius.
A substance's specific heat capacity (c), often known as its specific heat, is the amount of heat needed to increase 1 gram of that substance's temperature by 1 degree Celsius (or 1 kelvin). It can be expressed as follows:
c = q/mΔT
where q is the heat supplied, c is the constant of proportionality, called specific heat capacity of the body, m is the mass of the substance, and T is the temperature.
Just the type of substance that absorbs or releases heat determines a substance's specific heat capacity. It is an intense property—it doesn't matter how much of a substance there is; only its type does.
To know more about specific heat capacity, refer:
https://brainly.com/question/27641723
#SPJ4
A person can push a 50 N box 27 meters. If the person uses 300 Watts of power, how much time will it take?
Answer:
4.5 seconds
Explanation:
For this question, we're gonna use the formula below:
Power = Work / Time
where Power is measured in watts (W), Work is measured in joules (J), and Time is measured in seconds (s).
To solve for Time, we can rearrange the formula as follows:
Time = Work / Power
Now, we need to find the amount of work done in pushing the box:
Work = Force x Distance
where Force is measured in Newtons (N) and Distance is measured in meters (m).
So,
Work = 50 N x 27 m = 1350 J
Now we can substitute the values into the formula for time:
Time = Work / Power = 1350 J / 300 W = 4.5 s
Therefore, it will take 4.5 seconds for the person to push the 50 N box 27 meters using 300 watts of power.
Think about this hypothetical (not real) situation: Scientist discovered 2 new planets- Planet 11 and Planet Will. Both planets have the exact same diameter. However, Planet 11 has a MUCH stronger force of gravity. What can you infer about the relative MASS of each planet? Explain your answer.
Please answer in a full paragraph! :)
Based on the information provided, if Planet 11 has a much stronger force of gravity than Planet Will, we can infer that Planet 11 has a greater mass than Planet Will. This is because the force of gravity is directly proportional to the mass of an object. A planet with a greater mass will exert a stronger gravitational force on objects within its vicinity than a planet with a lower mass, assuming the two planets have the same diameter.
This relationship can be explained by the law of universal gravitation, which states that the force of gravity between two objects is proportional to the product of their masses and inversely proportional to the square of the distance between them. Therefore, if Planet 11 has a stronger gravitational force than Planet Will, it must have a greater mass, assuming that the distance between the two planets is the same.
In summary, the stronger force of gravity on Planet 11 compared to Planet Will implies that Planet 11 has a greater mass than Planet Will.
A small child weighs 25 kg. If mommy left him sitting on top of the stairs, which are 10 m high, how much energy does the child have?
Answer:
PE = 2450 Joules
KE = Assuming the child is at rest (not moving or accelerating), there is no Kinetic Energy
Explanation:
PE = potential energy
m = mass
g = gravity
h = height
PE = mgh
m = 25 kg
h = 10 m
g = 9.8 (when on Earth, gravity is always this number with more or less decimals)
[tex]PE = (25)(9.8)(10)=2450J[/tex]
A worker applies a force of 1,050 N to move a crate 22 m. How much work has he done?
Answer:
The work done by the worker can be calculated using the formula:Work = Force x Distance x cos(theta)where theta is the angle between the force and the direction of motion. Since the force is applied in the same direction as the motion, theta is 0 degrees and cos(theta) is equal to 1.So, substituting the given values into the formula:Work = 1,050 N x 22 m x cos(0)Work = 23,100 JoulesTherefore, the worker has done 23,100 Joules of work to move the crate 22 meters with a force of 1,050 N
Explanation:
The particles in in a gas move faster if its’ volume is decreased. (True or False)
False.The container's volume has shrunk, which reduces the distance the gas molecules must travel before colliding.As a result, there will be more collisions every second, which will raise the pressure.
As the volume is reduced, what happens to the gas particles?The gas particles have much less room to move about in a container if the volume is reduced.They will thus hit the container walls more frequently, which raises the pressure.
Does the volume of a gas particle impact its speed?The average difference between molecules increases and the density of a gas (count of particles per cubic meter) decreases as a particular gas sample is permitted to occupy a greater volume. The speed of a molecules remains constant.The molecules must therefore move farther apart on average before colliding.
To Know more about molecules visit:
https://brainly.com/question/19922822
#SPJ1
A flute filled with helium will, until the helium escapes, play notes at a much higher pitch than normal. Why
The sound travels through helium significantly more quickly than through air when a flute is filled with it as opposed to air since helium is substantially less thick than air, sound moves through it more quickly.
The frequency of a sound wave in which is the quantity of vibrations per second and it determines the pitch of a sound. Since helium has a higher sound speed than air, the sound waves created by the flute will move more quickly and at a higher frequency, producing a higher-pitched sound.
If a 550 kg horse is traveling at 20 m/s, how much kinetic energy does it have?
Answer:
KE = 110000 J
KE = 0.11 MJ
KE = 104.1794917935 [tex]BTU_{mean}[/tex]
KE = 26252.857981585 [tex]cal_{mean}[/tex]
The kinetic energy of a moving body can be calculated using its mass and velocity. The kinetic energy of the horse of 550 kg travelling at 20 m/s is 11000 J.
What is kinetic energy ?Kinetic energy of an object is generated by virtue of its motion. When the object starts moving its potential energy starts to convert into kinetic energy.
The kinetic energy of an object is related to its mass and velocity as follows:
Ke = 1/2 mv²
Hence, kinetic energy is directly proportional to the mass and velocity.
Given mass of the horse m = 550 kg
velocity = 20 m/s
then, Ke = 1/2 550 kg × (20 m/s)²
Ke = 11000 J.
Therefore, the kinetic energy of the horse is 11000 J.
Find more on kinetic energy:
https://brainly.com/question/15764612
#SPJ9
A flat coil of wire is placed in a uniform magnetic field that is in the y direction. (i) The magnetic flux through the coil is a maximum if the plane of the coil is where? (Select all that apply. ) in the xy plane in the yz plane in the xz plane in any orientation, because it is a constant (ii) For what orientation is the flux zero? (Select all that apply. ) in the xy plane in the yz plane in the xz plane in any orientation, because it is a constant
Due to theta's value of 90, flux in the x, y, and z planes will actually be zero. As long as the loop stays within the xz plane, which is parallel to the y axis that provides the most area again for passage of a magnetic field,
Flow = BA cos(theta) It will be at its highest if theta is zero and zero is ninety degrees.
The largest region for a magnetic field to flow through during a loop is situated in the xz plane, where theta is 90, is where flux will be zero in the xy plane and the yz plane.
Flow = BA cos(theta) It will be at its highest if theta is zero and zero is ninety degrees. In this situation, theta is 90, hence flux will indeed be 0 in the x, y, and z planes.
To know more about magnetic field click here
brainly.com/question/12244454
#SPJ1
What is the answer to this assignment?
The vertical component of the force vector 42 N is 7.29 N and the that of the vector B is 26 N. Then the resultant vector is 18.71 N. The equilibrant is the same but opposite in direction ie., - 18.71.
What are vectors ?Vectors are physical quantities having both magnitude and direction. The quantities with magnitude only are called scalar quantities. Force, work done, displacement , momentum etc are vector quantities.
The resultant of two vectors depends on their magnitude and direction. The given two vectors A and B are in opposite directions. Hence, the resultant vector will be their difference in magnitude.
Vertical component of vector A = 42 cos 80 = 7.29 N
component of vector B = 34 cos 40 = 26 N.
Then, resultant vector = 26 N - 7.29 N = 18.71 N
equilibrant = - 18.7 N.
Find more on vectors:
https://brainly.com/question/24256726
#SPJ1
A block is initially sliding along a surface of negligible friction with a speed v0 A constant force F0 is then exerted on the block. Which of the following figures represents the situations in which the kinetic energy of the block will initially decrease? Select two answers.
The frictional force reduces the block's kinetic energy and causes negative work to be done on it.
Simply put, what is kinetic energy?Kinetic energy is the energy that a thing has when it is moving. An item can only be accelerated through the application of a force. Applying force requires effort on our part. Following completion of the work, energy is transferred towards the object, which then moves at such a new, constant speed.
What kinds of things contain kinetic energy?
Kinetic energy appears to be the driving force behind motion, as evidenced by the way objects and subatomic particles move. Every particle & moving object contains kinetic energy. Examples of kinetic energy in motion include walking, a baseball flying through the air, food falling off a table, and just a charged particle within an electric field.
To know more about kinetic energy visit:
https://brainly.com/question/26472013
#SPJ1
Which of the following provided the best definition as to what is gravity? Group of answer choices What goes up must come down Everything with mass is attracted to everything else with mass Only small things are attracted to larger things Only larger things are attracted to smaller things
The statement that everything with mass is attracted to everything else with mass is the best definition of gravity.
What is gravity?In the field of physics, gravity is a basic interaction that causes all objects with mass or energy to attract one another. This force is present everywhere in the universe, and is the reason why all the planets in the solar system orbit around the sun.
From the group of answer choices, "Everything with mass is attracted to everything else with mass" is correct, since it describes the natural phenomenon by which all objects in the universe are attracted to one another.
The statement "What goes up must come down" is a simple observation of gravity's effects on objects on Earth, but it does not provide a complete definition of the force itself.
"Only small things are attracted to larger things" and "Only larger things are attracted to smaller things" are incorrect, as gravity acts on all objects with mass, regardless of their size.
To know more about gravity, visit:
https://brainly.com/question/14874038
#SPJ1
What example best describes absolute dating?
1. when the automobile was first built
2. when the dinosaurs lived
3. when the universe began
4. when humans first walked the earth
3. Someone at the third-floor window (12.0 m above the ground) hurls a ball downward at an angle of 45 degrees with a speed of 25 m/s. How fast will the ball be traveling when it strikes the sidewalk below?
The ball will be traveling at a speed of approximately 18.9 m/s when it strikes the sidewalk below.
What is Speed?
It is defined as the distance traveled per unit of time, usually expressed in units such as meters per second (m/s), kilometers per hour (km/h), or miles per hour (mph).
The horizontal component of the velocity remains constant throughout the motion, and it is given by:
Vx = Vcosθ
where V is the initial velocity of the ball and θ is the angle of projection. In this case, V = 25 m/s and θ = 45°, so:
Vx = 25*cos(45°) = 17.68 m/s
The vertical component of the velocity changes due to the acceleration due to gravity (g = 9.8 m/s^2). At the highest point, the vertical component of the velocity becomes zero, and the ball starts falling downwards. The final velocity (v) of the ball just before hitting the ground can be calculated using the following equation:
v^2 = u^2 + 2as
where u is the initial velocity in the vertical direction, a is the acceleration due to gravity, s is the distance traveled in the vertical direction, and v is the final velocity.
Initially, the ball is at a height of 12.0 m above the ground, so s = 12.0 m. The initial velocity in the vertical direction (Vy) is given by:
Vy = Vsinθ
where V is the initial velocity of the ball and θ is the angle of projection. In this case, V = 25 m/s and θ = 45°, so:
Vy = 25*sin(45°) = 17.68 m/s
When the ball hits the ground, its final velocity in the vertical direction is zero. Therefore, we can write:
v^2 = u^2 + 2as
0 = (17.68)^2 + 2*(-9.8)*12.0 - final velocity^2
final velocity = 18.9 m/s (approx)
Therefore, the ball will be traveling at a speed of approximately 18.9 m/s when it strikes the sidewalk below.
Learn more about Speed from given link
https://brainly.com/question/13943409
#SPJ1
1) Electrical conductivity (EC) measures the amount of ions in the water; we think of it as the amount of minerals in solution, either calcium, potassium, nitrogen, etc. Over time, has the EC increased or decreased significantly (more than 100 S/cm)? (0.5pt) If so, propose why that may have happened. (0.5pt)
2) Ammonia (NH4) is a waste product of fish. Over time, has NH4 increased or decreased significantly (by 0.25 or greater)? (0.5pt) If so, propose why that may have happened. (0.5pt).
3) Nitrite (NO2-) is a form of nitrogen produced by nitrifying bacteria. Over time, has NO2- increased or decreased significantly (by 5 or greater)? (0.5pt) If so, propose why that may have happened. (0.5pt).
4) Nitrate (NO3-) is a form of nitrogen produced by nitrifying bacteria and is food for plants. Over time, has NO3- increased or decreased significantly (by 10 or greater)? (0.5pt) If so, propose why that may have happened. (0.5pt).
The capacity of water to transmit electrical current is determined by its conductivity. The quantity of electrical ions in the water has a direct impact on this ability
What is called electrical conductivity?A material's electrical resistivity, also known as particular electrical resistance or volume resistivity, determines how effectively it opposes electric current. For example, pure water has a high electrical resistivity and is an insulator. A substance that easily permits electric current has a low resistivity. Greek character is often used to denote resistance (rho). The ohm-meter (m) is the SI measure of electrical impedance.
For instance, if the resistance between the sheet contacts on two opposing sides of a solid material square measuring 1 m3 is 1, the material has a resistivity of 1 m.
Learn more about electrical current,
https://brainly.com/question/2264542
#SPJ1
Cavendish did his experiment using lead balls. Suppose he had used equal masses of copper instead.
Would his value of G be the same or different? Explain.
Answer:
The value of G is constant (does not depend on masses M1 and M2)
However, F (force) would be smaller and harder to measure
The gravitational constant is proportional to mass and not density