A metal has a specific heat of 0.424 J/gC. You have 85 g of the metal at an initial temperature of 25 C. You added 650 J of heat to the metal. What is the final temperature of the metal?

A physical change is when a substance's phase changes. Low molecular attraction material C requires more energy to be moved out, which means its kinetic energy must be reduced.

Neither creation nor destruction of energy is possible. Yet, it is transferable from one type to another, preserving the system's overall energy.

In the liquid state, molecules or atoms have medium molecular affinity and are somewhat closer together than they are in the gaseous state, where they are widely apart and have low intermolecular forces of attraction.

As a material transforms from a gas to a liquid, its molecules condense and become closer to one another, creating a stronger molecular attraction.

Gas B has a medium level of molecular attraction, making it easy to liquify with little energy transfer, whereas gas C has a lower level of molecular attraction but a greater level of kinetic energy, requiring more energy transfer.

To know more about physical changes visit:

https://brainly.com/question/17931044

#SPJ1

The percentage composition of magnesium hydroxide in the substance (Mg(OH)2) is 41.67%.

Magnesium hydroxide (Mg(OH)2) is of one magnesium (Mg) atom and two hydroxides (OH) ions.

The atomic mass of Mg = 24.31 g/mol

the atomic mass of O and H = 15.99 g/mol & 1.01 g/mol

The molecular weight of Mg(OH)2 is:

Mg(OH)2 = (24.31 g/mol) + 2(15.99 g/mol + 1.01 g/mol)

= 58.32 g/mol

To calculate percentage composition, we need to calculate the mass of magnesium in one molecule of  (Mg(OH)2)

Mass of Mg = 24.31 g/mol

The percentage composition of magnesium in Mg(OH)2 is:

(24.31 g/mol / 58.32 g/mol) x 100% ≈ 41.67%

Therefore, the percentage composition of magnesium in Mg(OH)2 is approximately 41.67%.

To learn more about, Percentage composition of the molecule

https://brainly.com/question/17021926

https://brainly.com/question/26632540

When you increase the amount of carbon dioxide in the atmosphere, you also increase the amount of carbonic acid in the ocean.

Carbon dioxide is absorbed from the atmosphere into the ocean through a process called "oceanic uptake," which is facilitated by the exchange of gases at the air-sea interface.

As more carbon dioxide is emitted into the atmosphere, the concentration of carbon dioxide in the ocean increases, leading to a phenomenon called "ocean acidification".

Ocean acidification can have a number of negative impacts on marine organisms, including reduced growth rates and weakened shells or skeletons.

Thus, we can conclude this increases the amount of carbonic acid in ocean.

Learn more about increase in carbon dioxide here: https://brainly.com/question/28157529

#SPJ1

Answer:

Therefore, the answer is none of the above; all options are associated with the triangle.

Explanation:

In an isosceles right triangle, the two legs are congruent, and each angle other than the right angle is 45 degrees. Since the hypotenuse of the triangle is 6 units, each leg has a length of:

leg length = hypotenuse / √2 = 6 / √2

This can be simplified by multiplying the numerator and denominator by √2:

leg length = (6 / √2) * (√2 / √2) = 6√2 / 2 = 3√2

Therefore, the length of each leg is 3√2 units.

Option (c) 6√2 is associated with the triangle as it is the length of the hypotenuse.

Option (a) 45° degrees is associated with the triangle as it is one of the acute angles of the isosceles right triangle.

Option (b) 90° degrees is associated with the triangle as it is the right angle of the isosceles right triangle.

Option (d) 3√2 is associated with the triangle as it is the length of each leg of the isosceles right triangle.

Therefore, the answer is none of the above; all options are associated with the triangle.

we need to add 0.20 moles of HCl to 1 liter of the buffer solution to achieve a pH of 8.56.

The Henderson-Hasselbalch equation for the buffer system is:

pH = pKa + log([A-]/[HA])

where pKa is the acid dissociation constant for ammonium ion (NH4+), [A-] is the concentration of ammonia (NH3), and [HA] is the concentration of ammonium ion (NH4+).

The pKa for NH4+ is 9.25, so:

pH = 9.25 + log([NH3]/[NH4+])

Substituting the given concentrations, we get:

8.56 = 9.25 + log([NH3]/0.96)

log([NH3]/0.96) = -0.69

[NH3]/0.96 = 0.21

[NH3] = 0.20 M

The balanced chemical equation for the reaction between HCl and NH3 can be used to determine how much HCl is necessary to reach this new concentration:

HCl + NH3 → NH4+ + Cl-

Calculating the amount of HCl required to convert some of the NH3 to NH4+ is all that is necessary because the buffer solution already includes NH4+ and Cl-. The required amount of NH4+ is:

[NH4+] = [NH3] = 0.20 M

The amount of  HCl is needed is

0.20 mol NH3 × 1 mol HCl/1 mol NH3 = 0.20 mol HCl

Therefore, we need to add 0.20 moles of HCl to 1 liter of the buffer solution to achieve a pH of 8.56.

learn more about buffer solutions here

https://brainly.com/question/8676275

#SPJ1

Between genes A and B, there is a wider separation or distance than between genes C and D.

The chance of recombination is 50% when the genes are distant from one another or on different chromosomes. In this instance, the two loci's allele inheritance is independent. Recombination frequency less than 50% indicates a connection between the two loci.

A illness that is passed from parent to kid may be linked to one or more genes with certainty thanks to genetic mapping. Moreover, mapping can reveal which chromosome a gene is located on and where exactly it is located on that chromosome.

To learn more about genes visit:

brainly.com/question/8832859

#SPJ1

Answer:

The rearrangement of atoms is a chemical change.

Explanation:

Answer:

I believe the answer is carbon dating

Explanation:

The limiting reactant in this reaction is lead nitrate Pb(NO₃)₂. The mass of lead nitrate in this reaction is 331.2 g. The percent yield of PbI₂ is 76.5%.

The percent yield of a reaction is the ratio of its actual yield to the  theoretical yield multiplied by 100.

The limiting reactant of a reaction is the reactant which is not in sufficient quantity and as soon as it is consumed, the reaction stopes.

As per the given balanced equation, 2 moles of KI reacts with one mole of  lead nitrate. Then, 2.8 moles of KI need 1.4 moles of lead nitrate. Hence, Pb(NO₃)₂ is the limiting reactant.

molar mass of Pb(NO₃)₂ = 331.2 g/mol

molar mass of KI = 166 g/mol

mass of 2 moles = 332 g

mass of PbI₂ = 461 g/mol

mass of 0.765 moles = 352.6 g.

molar mass of KNO₃ = 101 g

mass of 1.53 moles = 154 .5 g.

One mole of Pb(NO₃)₂ gives one mole of PbI₂. Hence the theoretical yield is one mole. But the actual yield of the product lead iodide is 0.765 moles.

then percent yield = 0.765/1 × 100 = 76.5 %.

Find more on percent yield :

https://brainly.com/question/12704041

#SPJ1

Molecular formula mass = empirical formula mass x n

We know that the molecular formula mass is approximately 60 g/mol, so that we can set up an equation:

60 g/mol = 30 g/mol x n

Solving for "n," we get:

n = 2

This means that the molecular formula of the compound is twice the empirical formula of C2H4O2. Therefore, the compound is acetic acid.

Acetic acid is one of the simplest carboxylic acids and is an important chemical reagent and industrial chemical. It is widely used in the production of vinyl acetate monomer (VAM), which is used in manufacturing polymers, adhesives, and coatings. It is also used as a solvent and preservative in food and other products.

Ethanoic acid is the main component of vinegar, typically a 5% solution of acetic acid in water. In addition to its industrial and commercial uses, acetic acid also has some medical applications, such as in treating ear infections and as a topical antimicrobial agent.

To learn more about acid, visit here:

https://brainly.com/question/14072179

#SPJ1

The mass of H2 produced is 0.657 g.

Generally, The balanced equation is:

2 HCl → H2 + Cl2

The molar mass of HCl is 36.5 g/mol (1+35.5).

First, we need to determine the number of moles of HCl:

23.8 g HCl × (1 mol HCl/36.5 g HCl) = 0.651 mol HCl

From the balanced equation, we can see that 2 moles of HCl produce 1 mole of H2:

2 mol HCl → 1 mol H2

So, we can calculate the number of moles of H2 produced:

0.651 mol HCl × (1 mol H2/2 mol HCl) = 0.326 mol H2

Finally, we can use the molar mass of H2 to convert the number of moles of H2 to grams:

0.326 mol H2 × 2.016 g H2/mol = 0.657 g H2

Read more about chemical reaction

https://brainly.com/question/29039149

#SPJ1

Answer:

4.42 x 10^22 molecules

Explanation:

1 mole of CO2 has 6.022 x 10^23 molecules

=> 0.0734 x 6.022 x 10^23 = 4.420148 x 10^22 or 4.42 x 10^22

Any time a liquid loses or receives energy, the temperature of the liquid changes.To calculate the amount pf energy change, the calorimeter monitors the weight of the fluid as well as the temperature change.

The 6000 series calorimeters' control systems serve as the foundation for the 6772 Calorimetric Thermometer, a high precision temperatures measuring device.It is a crucial component of both the 6755 Solution Calorimeter and the 6725 Semi-micro Calorimeter.

The calorimeter is a piece of equipment used in calorimetry, a procedure for calculating heat capacity and measuring the temperature of chemical processes or other physical changes.Among the most popular kinds are differential scanning operating, thermal micro cathode rays, titration calorimeters, and accelerated rate calorimeters.

To know more about energy visit:

https://brainly.com/question/1932868

#SPJ1

There are approximately 1.39 × 10²³ oxygen molecules in the balloon.

Oxygen is colorless, odorless and tasteless gas and it supports life. It is noncombustible but actively supports the burning of combustible materials.

To calculate number of oxygen molecules in the balloon, we use the Avogadro's number, which is equal to 6.022 × 10²³ molecules per mole of substance.

As moles of oxygen gas = mass of oxygen gas / molar mass of oxygen gas

moles of oxygen gas = 7.36 g / 32 g/mol

So, moles of oxygen gas = 0.23 mol

Now we use the Avogadro's number to calculate number of oxygen molecules in the balloon:

As number of oxygen molecules = moles of oxygen gas × Avogadro's number

number of oxygen molecules = 0.23 mol × 6.022 × 10²³  molecules/mol

number of oxygen molecules = 1.39 × 10²³  molecules

Therefore, there are approximately 1.39 × 10²³  oxygen molecules in the balloon.

To know more about oxygen gas, refer

https://brainly.com/question/29544298

#SPJ9

Answer:

the mass of 2.20 x 10^22 formula units of NaOH is 1.46 grams to three significant figures.

Explanation:

To calculate the mass of 2.20 x 10^22 formula units of NaOH, we can use the following steps:

Calculate the number of moles of NaOH:

Number of moles = Number of formula units / Avogadro's number

Number of moles = 2.20 x 10^22 / 6.022 x 10^23

Number of moles = 0.0365 mol

Calculate the mass of NaOH:

Mass = Number of moles x Molar mass

Mass = 0.0365 mol x 40.0 g/mol

Mass = 1.46 g

Therefore, the mass of 2.20 x 10^22 formula units of NaOH is 1.46 grams to three significant figures.

3.011  × 10²³ molecules are in 0.5 moles of PCl₃.

The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter.

A mole is defined as the amount of substance containing the same number of atoms, molecules, ions, etc. as the number of atoms in a sample of pure 12C weighing exactly 12 g.

Given,

Moles of PCl₃ = 0.5 moles

We know that 1 mole = 6.023 × 10²³ molecules

Thus, 0.5 moles will have 6.023 × 10²³ × 0.5 molecules.

= 3.011  × 10²³ molecules

Therefore, 3.011  × 10²³ molecules are in 0.5 moles of PCl₃.

Learn more about Moles, here:

https://brainly.com/question/20486415

#SPJ9

The balanced complete neutralization reaction between each pair of reactants are-

CH₃COOH + NaOH → CH₃COONa + H₂O

CaCO₃ + HCl → CaCl₂ + H₂CO₃

What is balancing of a reaction?

Balancing of a reaction is based on Law of conservation of mass where we have to balance masses of the reactants and products in LHS and RHS of a chemical reaction.

For e.g -

6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂

Therefore, the balanced complete neutralization reaction between each pair of reactants are-

CH₃COOH + NaOH → CH₃COONa + H₂O

CaCO₃ + HCl → CaCl₂ + H₂CO₃

Learn more about Balancing of a reaction, here:

https://brainly.com/question/14258973

#SPJ9

Therefore, the pressure when the container is expanded to 10.6 L is 367 mmHg.

Molarity, also known as molar concentration, is a unit of measurement used to express the concentration of a solution. It is defined as the number of moles of a solute dissolved in one liter of solution. The unit of molarity is moles per liter (mol/L), also written as M. For example, a solution with a molarity of 0.1 M contains 0.1 moles of solute per liter of solution. Molarity is commonly used in chemistry and biochemistry to describe the concentration of solutions in experiments and industrial processes.

Here,

We can use the combined gas law to solve for the new pressure:

P1V1/T1 = P2V2/T2

We are given:

P1 = 845 mmHg

V1 = 4.60 L

V2 = 10.6 L

Assuming that the temperature is constant, we can simplify the equation to:

P1V1 = P2V2

Solving for P2, we get:

P2 = P1V1/V2

Plugging in the values, we get:

P2 = 845 mmHg × 4.60 L / 10.6 L

P2 = 367 mmHg

To know more about molarity,

https://brainly.com/question/8732513

#SPJ9

Many elements can form double bonds, but some of the most common ones include:

Carbon (C)

Oxygen (O)

Nitrogen (N)

Sulfur (S)

Selenium (Se)

Tellurium (Te)

Phosphorus (P)

Silicon (Si)

Germanium (Ge)

Tin (Sn)

These elements can form double bonds with other atoms of the same element, or with different elements. Double bonds occur when two atoms share two pairs of electrons.

The volume of the balloon is 12 it reaches this then  it is fully cooled by my refrigerator.

What is volume ?

Space is occupied by every three-dimensional object. Its volume serves as a gauge for this area. The area contained by an object's limits in three-dimensional space is referred to as its volume. Another name for it is an object's capacity.

What is temperature ?

The movement of these particles likewise increases with rising temperature. A thermometer or a calorimeter are used to measure temperature.

Therefore, The volume of the balloon is 12 it reaches this then  it is fully cooled by my refrigerator.

Learn more about volume from the given link.

https://brainly.com/question/463363

#SPJ1

No, using hydrochloric acid (HCl) to dissolve copper metal in the Preparation of Copper (I) Chloride experiment is not recommended because it would result in the formation of copper (II) chloride rather than copper (I) chloride.

How to prepare Copper (l) Chloride?

Copper metal reacts with hydrochloric acid to form copper (II) chloride and hydrogen gas:

Cu (s) + 2HCl (aq)

→ CuCl2 (aq) + H2 (g)

In contrast, when copper metal reacts with nitric acid, it is oxidized to copper (II) ions by the nitric acid. These copper (II) ions then react with copper metal to form copper (I) ions, which react with chloride ions to form copper (I) chloride:

Cu (s) + 4HNO3 (aq) → Cu(NO3)2 (aq) + 2NO2 (g) + 2H2O (l)

Cu(NO3)2 (aq) + 2Cu (s) → 3Cu2+ (aq) + 2NO3- (aq)

3Cu2+ (aq) + 2Cl- (aq) → Cu3Cl2 (s)

Therefore, to obtain copper (I) chloride, it is necessary to use nitric acid in the first reaction.

To learn more about hydrochloric acid (HCl), visit: https://brainly.com/question/23260126

#SPJ1

Precipitation reactions;

2KCl + Pb(NO3)2 ----> PbCl2 + 2KNO3

Ba(NO3)2 + K2SO4 -----> BaSO4 + 2KNO3

Hg2(C2H3O2)2 + 2NaCl -----> Hg2Cl2 + 2NaC2H3O2

Non precipitation reactions

C + O2 ---> CO2

HBr + KOH ----> KBr + H2O

HCl + KOH -----> KCl + H2O

H2O2 + NaOBr ----> NaBr + H2O + O2

A precipitation reaction is a type of chemical reaction that occurs when two aqueous solutions (solutions dissolved in water) are mixed together and form an insoluble solid called a precipitate.

The reaction is characterized by the exchange of ions between the two aqueous solutions, which leads to the formation of the insoluble solid.

Learn more about precipitation reaction:https://brainly.com/question/29762381

#SPJ1

The concentrations of PCl5(g) and PCl3(g) at equilibrium are 0.0524 M and 0.0165 M, respectively.

For the given reaction, the equilibrium constant (Kc) is 1.80 at 250 °C.

The concentration of PCl5(g) is 0.2377 mol/3.45 L = 0.0689 M at the beginning of the process.

Let x M be the PCl3(g) concentration at equilibrium. Hence, x M is likewise the concentration of Cl2(g) at equilibrium.

Using the equilibrium constant expression:

Kc = [PCl3][Cl2]/[PCl5]

1.80 = x * x / (0.0689 - x)

Solving for x using the quadratic formula:

x = [(-1) ± sqrt(1 + 4 * 1.80 * 0.0689)] / (2 * 1)

x = 0.0165 M or 0.0524 M

Therefore, at equilibrium:

[PCl5] = 0.0689 - x = 0.0524 M

[PCl3] = x = 0.0165 M

So, the concentrations of PCl5(g) and PCl3(g) at equilibrium are 0.0524 M and 0.0165 M, respectively.

learn more about equilibrium here

https://brainly.com/question/517289

#SPJ1

Answer:

2.5 moles of aluminum oxide will form when all 5.0 moles of aluminum are used up.

Explanation:

The balanced chemical equation for the reaction between aluminum (Al) and oxygen (O2) to form aluminum oxide (Al2O3) is:

4 Al + 3 O2 → 2 Al2O3

This equation shows that 4 moles of aluminum react with 3 moles of oxygen to form 2 moles of aluminum oxide.

According to the problem, we have 5.0 mol of aluminum, which is more than enough to react with the oxygen available, and the limiting reagent in this reaction will be aluminum. Therefore, we need to use the mole ratio from the balanced equation to find out how many moles of aluminum oxide will form when all 5.0 moles of aluminum are used up.

From the equation, we can see that for every 4 moles of aluminum, 2 moles of aluminum oxide will form. Therefore, the mole ratio of aluminum to aluminum oxide is 4:2, or simplified, 2:1.

Using this mole ratio, we can calculate the number of moles of aluminum oxide that will form when all 5.0 moles of aluminum react:

5.0 mol Al × (2 mol Al2O3/4 mol Al) = 2.5 mol Al2O3

Therefore, 2.5 moles of aluminum oxide will form when all 5.0 moles of aluminum are used up.

Answer:

First, we need to calculate the amount of heat required to raise the temperature of ice from -21°C to 0°C:

q1 = m × C_solid × ΔT = 31 g × 2.09 J/g·°C × (0°C - (-21°C)) = 1341.09 J

Next, we need to calculate the amount of heat required to melt the ice at 0°C:

q2 = m × ΔH_fusion = 31 g × 334 J/g = 10354 J

Then, we need to calculate the amount of heat required to raise the temperature of the liquid water from 0°C to 42°C:

q3 = m × C_liquid × ΔT = 31 g × 4.18 J/g·°C × (42°C - 0°C) = 5201.56 J

Finally, we need to calculate the amount of heat required to vaporize the liquid water at 100°C:

q4 = m × ΔH_vaporization = 31 g × 2260 J/g = 70060 J

The total amount of heat required is the sum of all four steps:

q_total = q1 + q2 + q3 + q4 = 86857.65 J

Converting to kJ:

q_total = 86.85765 kJ

Therefore, the amount of heat required to convert 31 g of ice at -21°C to liquid water at 42°C is approximately 86.9 kJ.

Explanation:

The  likely statement that would be a result of switching from geothermal energy to biomass energy as the primary energy source for a home is

Deforestation would give way to land for crops.

Option C is correct.

Deforestation is described as the removal of a forest or stand of trees from land that is then converted to non-forest use.

Switching from geothermal energy to biomass energy would result to increase the demand for organic materials, leading to deforestation and a loss of habitat for wildlife.

Learn more about Deforestation at: https://brainly.com/question/4708882

#SPJ1

The algorithm can be used to determine a wave's frequency if its wavelength is known: Frequency ⇒ 1/wavelength.

Define wavelength.

The extent of a wave is expressed by its wavelength. The wavelength is the distance between one wave's peak and the next wave's crest. The wavelength can also be determined by measuring from the "trough" (bottom) of one wave to the "trough" of the following wave.

Wavelength and frequency are inversely related. The number of waves that pass a fixed location in a unit of time is referred to as frequency. It also explains how many cycles or vibrations a body in periodic motion experiences in a given unit of time.

To learn more about periodic motion  use:

https://brainly.com/question/9059845

#SPJ1

The limiting reagent is chlorine.

The amount of excess reagent that will remain is 0.918 g of Al.

The balanced chemical equation for the reaction is:

2Al + 3Cl2 → 2AlCl3

The molar mass of Al is 26.98 g/mol and the molar mass of Cl2 is 70.90 g/mol. We can use these values to calculate the number of moles of each reactant:

moles of Al = 2.70 g / 26.98 g/mol = 0.100 mol

moles of Cl2 = 4.05 g / 70.90 g/mol = 0.057 mol

According to the balanced equation, 2 moles of Al react with 3 moles of Cl2 to produce 2 moles of AlCl3. Therefore, the amount of AlCl3 produced by each reactant is:

Al: (0.100 mol Al) x (2 mol AlCl3 / 2 mol Al) = 0.100 mol AlCl3

Cl2: (0.057 mol Cl2) x (2 mol AlCl3 / 3 mol Cl2) = 0.038 mol AlCl3

Since Cl2 produces less AlCl3, it is the limiting reagent. The amount of excess Al can be calculated as follows:

moles of excess Al = moles of Al - (moles of Cl2 x (2 mol Al / 3 mol Cl2))

moles of excess Al = 0.100 mol - (0.057 mol x (2/3))

moles of excess Al = 0.034 mol

The mass of excess Al can then be calculated using its molar mass:

mass of excess Al = moles of excess Al x molar mass of Al

mass of excess Al = 0.034 mol x 26.98 g/mol

mass of excess Al = 0.918 g

Therefore, 0.918 g of Al remains unreacted.

More on stoichiometric problems can be found here: https://brainly.com/question/28297916

#SPJ1

The lithium metal batteries are used in many devices like cell phones, tablets and laptops. The special provision 149 tells you what safety mark should be used.

The primary batteries which have metallic lithium as an anode are called lithium metal batteries. Most of the lithium metal batteries are found to be non-rechargeable. There are three types of cells which are used in lithium batteries, they are cylindrical, prismatic and pouch cells.

The special provision 149 of the TDG regulations states that UN3090, LITHIUM METAL BATTERIES and UN3480 LITHIUM ION BATTERIES are forbidden for transport as cargo on a passenger aircraft.

To know more about lithium batteries, visit;

https://brainly.com/question/29553602

#SPJ1