A long solenoid with closely spaced turns carries electric current. Does each turn of wire exert (a) an attractive force on the next adjacent turn, (b) a repulsive force on the next adjacent turn, (c) zero force on the next adjacent turn, or (d) either an attractive or a repulsive force on the next turn, depending on the direction of current in the solenoid?

Answer:

42- electromagnetic force

Explanation:

electrons keep orbiting around the nucleus thanks to electromagnetic force :)

hope this helped!

Newton's investigations of gravity explain the truth that Jupiter has more moons than Earth.

The fact that Jupiter has more moons than Earth was first discovered by Galileo Galilei in 1610, and it was later confirmed by Newton. In addition to having more moons, it is also thought that Jupiter may be home to some of the most powerful magnetic fields in the solar system.

Every particle in the cosmos attracts every other particle with a force that is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centers, according to Newton's law of universal gravitation.

Thus, the equation for universal gravity has the following structure:

[tex]{\displaystyle F=G{\frac {m_{1}m_{2}}{r^{2}}}}{\displaystyle[/tex]

where r is the distance between the centers of the two objects' masses, m1 and m2 are their respective masses, G is the gravitational constant, and F is the gravitational force acting between them.

To learn more about Isaac Newton's law of gravity, visit:

https://brainly.com/question/3681346

#SPJ4

The correct answer is; Gravity acts on all objects in the universe.

The answer above is incorrect…

Answer: 6 km/h²

Explanation:

Final Speed= 60 km/h

Initial Speed= 30 km/h

Time= 5 sec

Now,

60= 30 + Acceleration*5

⇒Acceleration = 6 km/h²

The chain on the swing should be 8.0 m long .

Centripetal Acceleration ( a ) = v ² / r ........... Eq. 1

It is given that ,

a = 21 m / s ²

v = 13 m / s

Now ,  using the values of ' a ' and ' v ' i.e. 21 m / s ² & 13 m / s respectively in Eq. 1

a =  v ² / r

21 = ( 13 ) ² / r

21 = ( 13 x 13 ) / r

r = ( 13 x 13 ) / 21

r = 8.047 m

⇒ r = 8.0 m ( rounded off to nearest tenth )

Hence , the chain on the swing should be 8.0 m long .

To learn more about Centripetal Acceleration kindly check :

https://brainly.com/question/22103069

#SPJ9

The measurements by the different scientists were 1.01 m, 0.99 m and 1.00 m,  which are not exactly same as the standard value of a meter. But all the three values are very much close to each other.

Meter is a fundamental unit of length in the metric system and in the International Systems of Units (SI). It is denoted by m.

Therefore the measurements for the bar kept at the international bureau of standards taken by the three scientists were precise but not accurate.

To know more about meter,

https://brainly.com/question/14774462

#SPJ4

The average rate of change of height from the initial launch to the maximum height is 180 feet.

The given function is

[tex]h(t) = -16t^{2} +120t+6[/tex]

The average rate of change of h(t) from t=a to t=b is given by:

[tex]\frac{h(b)-h(a)}{b-a}[/tex]

Vertical Velocity will be zero at maximum height. To find maximum height we differentiate the equation to get an equation for the velocity and set it to zero.

On differentiating we get,

h'(t) = -16(2)t + 120

h'(t) = -32t + 120

now equating to zero we get

t = 3.75 s

This is the time at which the rocket reaches maximum height.

The initial launch occurs at t = 0

substituting it in the original equation we get

[tex]h(t)[/tex] = [tex]-16(0)^{2}+120(0)+6[/tex]

[tex]h(t) = 6[/tex]

The average rate of change from the initial launch to the maximum height is:

[tex]\frac{h(3.75)-h(0)}{3.75-0}[/tex]

= [tex]\frac{681-6}{3.75}[/tex]

= 180

Hence the average rate of change from the initial launch to the maximum height is 180 feet.

To know more about problems based on rocket launch kindly refer to the below link:

https://brainly.com/question/3329909

#SPJ4

the magnitude of the electric field needed to balance its weight is  

0.75 ×10⁵N/C

The oil drop method was performed by Robert A Millikan in 1909.

It is used to determine the size of the charge  on an atom.

Millikan used vacuum pump oil for this his experiment.

to find out the magnitude of electric field

W = q E,

W = weight (W = mg)

q = charge (1.6×10⁻¹⁴C)

E = Electric field

→ oil drops were suspended against the gravitational force by a vertical electric field such that its weight is balanced by the electron force i.e.

W =  1.2× 10⁻¹⁴

1.2× 10⁻¹⁴ = q × E

E =  1.2× 10⁻¹⁴N/ 1.6×10⁻¹⁹C

E =  0.75 ×10⁵N/C

the magnitude of the electric field needed to balance its weight is  

0.75 ×10⁵N/C

To know more about Millikan experiment :

https://brainly.com/question/14620135

#SPJ4

The question 'How do electromagnetic and mechanical waves compare?'

There are many similarities between electromagnetic waves and mechanical waves.

In Physics, both electromagnetic and mechanical waves have amplitude, wavelength, and frequency.

Electromagnetic waves can travel through empty spaces as well such as vacuums, gases, liquids, and solids.

While mechanical waves can not propagate through space they can only travel through liquids, solids, and gases.

water waves and ripples in a pool are examples of mechanical waves.

Examples of EM waves are radio signals and light waves, microwaves, and X-rays.

To put it simply, EM waves do not require a medium to travel whereas mechanical waves require a medium to propagate.

If you need to learn more about mechanical waves click here:

https://brainly.com/question/26116832

#SPJ4

Yes, either pole generates a field that causes atoms within the iron to rotate in order to align their magnetic moments with the exterior field.

A magnet has a significant normal force acting on the door. The magnet is then held in place by frictional force.

A magnet is defined as a magnetic field-producing item capable of attracting unlike poles and repelling similar poles.

Magnets are manufactured from a class of metals known as ferromagnetic metals. These metals include nickel and iron. These metals are unusual in their ability to magnetize consistently. When we ask how a magnet works, we mean how the magnetic field of a magnet affects the thing.

There are many different sizes and shapes of magnets.

Magnets can be found in a variety of objects and settings, including toys, cabinet hardware, ornamental pieces placed on refrigerators, and other objects and sites.

To learn more about magnet, visit:

https://brainly.com/question/2841288

#SPJ4

The wavelengths of the following quantum particles from the largest to the smallest is (d) > (a) = (e) > (b) > (c)

De Broglie's relationship is given by  [tex]\lambda=\frac{h}{mv}[/tex] .

This can be written as [tex]\lambda=\frac{h}{p}[/tex]  .....(1) where λ  is known as de Broglie wavelength and p is momentum , h = Plank’s constant .

As we know that mass of proton is greater than electron and photon .

(a)For photon , the momentum is given by [tex]p=\frac{E}{c}[/tex]     ...(2)  where c is the speed is the speed of light .

Putting E = 3eV in equation (2) , we get

              [tex]p=\frac{3\times 1.6\times10^-^1^9}{3\times 10^8} \\p=1.6\times10^-^2^7Js/m[/tex]

Putting this value of p in equation (1) , we get

  [tex]\lambda=\frac{6.62\times10^{-34}}{1.6\times10^{-27}}\\\lambda=4.13\times10^{-7}[/tex]

(b) As we know that  kinetic energy is given by

         [tex]K.E=\frac{1}{2} mv^2\\\\2K.E = mv^2\\2K.E\times m = m^2v^2\\2K.E\times m = (mv)^2\\2K.E\times m = p^2\\\\\sqrt{2K.E\times m }=p[/tex]      ...(3)

Where mass of electron is [tex]9.1\times10^-^3^1 kg[/tex] .

Putting K.E = 3eV in equation (3) , we get

    [tex]\sqrt{2K.E\times m }=p\\p=\sqrt{2\times3\times1.6\times10^{-19} \times 9.31\times10^{-31} }\\p=\sqrt{89.376\times10^{-50}} \\p=9.45\times10^{-25}Js/m[/tex]

Putting this value of p in equation (1) , we get

[tex]\lambda=\frac{6.62\times10^{-34}}{9.45\times10^{-25}}\\\lambda=0.7005\times10^{-9}[/tex]

(c) Putting [tex]m=1.67\times10^{-27}kg[/tex] and K.E = 3eV in equation (3) , we get

     [tex]\sqrt{2K.E\times m }=p\\p=\sqrt{2\times3\times1.6\times10^{-19} \times 1.67\times10^{-27} }\\p=\sqrt{16.032\times10^{-46}} \\p=4.003\times10^{-23}Js/m[/tex]

Putting this value of p in equation (1) , we get

[tex]\lambda=\frac{6.62\times10^{-34}}{4.003\times10^{-23}}\\\lambda=1.65\times10^{-11}[/tex]

(d) Putting E = 0.3eV in equation (2) , we get

   [tex]p=\frac{0.3\times 1.6\times10^-^1^9}{3\times 10^8} \\p=1.6\times10^-^2^8Js/m[/tex]

Putting this value of p in equation (1) , we get

[tex]\lambda=\frac{6.62\times10^{-34}}{1.6\times10^{-28}}\\\lambda=4.13\times10^{-6}[/tex]

(e) Putting [tex]p=3eV/c[/tex] in equation (1) , we get

    [tex]\lambda=\frac{6.62\times10^{-34}\\\times3\times10^8}{3\times1.6\times10^{-19}}\\\lambda=4.13\times10^{-7}[/tex]

On comparing the wavelength order should be (d) > (a) = (e) > (b) > (c) .

Learn more about de brogile here :

https://brainly.com/question/28165547

#SPJ4

The length of rod in terms v(r) and t is L = [  Δt / (1/343) - (1/v(r)) ].

3.56 km/s is the speed of a one-dimensional compressional wave moving along a thin copper rod.

At one end of the rod, a hard hammer strike is delivered. With a time interval of Δt between the two pulses, a listener at the other end of the rod hears the sound twice as it travels through the metal and the air.

The time interval is given by t = L/v.

We know, The speed of air, v(air) = 343 m/s

Now,

When the copper rod is swapped out for a different substance and the sound speed is measured as v(r).

The delay between pulses arrivals is:

Δt = L [(1/v(air)) - (1/v(copper))]

Then,

L = [  Δt / (1/v(air)) - (1/v(r)) ]

L = [  Δt / (1/343) - (1/v(r)) ]

Here L is the length of the rod, Δt is in seconds and v(r) is the speed of sound in the rod.

Learn more about speed here:

https://brainly.com/question/13943409

#SPJ4

Answer:

a

Explanation:

aaaaaaaaaaaaaaaaaaaaaaaa

Answer:

you can find answer in this

Explanation:

https://physics.nist.gov/cuu/Units/units.html

The two types of potential energies which would be types of mechanical energies are elastic and gravitational.

The correct answer choice is option D

Potential energy means the energy a body possess in relation to its position. Other forms of energy include

Kinetic energy is the energy a body possesses due to its motion.

So therefore, the two types of potential energies which would be types of mechanical energies are elastic and gravitational. The correct answer choice is option D

Learn more about potential energy:

https://brainly.com/question/24933254

#SPJ1

Answer: it is d

Explanation: i took the unit test on edge

The distance from the speaker would the sound be barely audible is 477.46km.

It's how far away two objects or locations are measured numerically as distance. Distance in physics or common language can refer to a physical length or an assumption based on other factors (e.g. "two counties over"). Sometimes the symbol |AB| is used to indicate how far apart two points are. "Distance from A to B" and "Distance from B to A" are typically equivalent terms. A distance function or metric in mathematics is an extension of the idea of physical distance; it defines what it means for components in a space to be "near to" or "far away" from one another. Distance is a non-numerical unit of measurement in the social sciences and psychology.

Explanation:

Sound audible(barely) = 0dB

I= 10.709*I/[tex]10^{-10}[/tex]=0

I= [tex]10^{-12}[/tex]*[tex]10^{0}[/tex]=[tex]10^{-12}[/tex]w/[tex]m^{2}[/tex]

[tex]distance(r)=\sqrt[]{\frac{P}{4\pi I} } =\sqrt[]{\frac{6}{4\pi * 10^{-12} } } =477.46 km[/tex]

To learn more about distance ,visit:

https://brainly.com/question/15172156

#SPJ4

Explanation:

Q = charge in C(coulombs)

I = current in A(amps)

t = time in s(seconds)

Q = I × t

I = Q / t

Substitute in given values.

I = 300C / 30s

= 10A

Hope this helped! ^^

The electric current generated by a charge of 300 coulombs passing through the cross section of a conductor in a time of 30 seconds is: 10 A

To solve this exercise the formula for electric current and the procedure we will use is:

I= q/t

Where:

Information about the problem:

Applying the electric current intensity formula we have:

I= q/t

I= 300 C / 30 s

I= 10 A

In physics the intensity of the electric current is the magnitude that expresses the amount of electric charge or electric current in coulomb (c) that passes through an electrical conductor in a given time in seconds (s). Its unit of measurement in the international system is the Ampere (A).

Learn more about electric current at: brainly.com/question/1100341

#SPJ4

The work done is by the centripetal force on mass m during an angular displacement of 2π revolutions mv²2π /r J

Centripetal force - a force acts on an moving object in circular path.

the centripetal force is given by

F= mv²/r       (equation1)

Work done is given by

W = Fd          (equation 2)

d = 2π

work is done by the centripetal force on mass m during an angular displacement of 2π revolutions is given by:

to calculate work done using equation 1 in 2  we get

W = mv² d/r

 W = mv² × 2π /r J

The work done is by the centripetal force on mass m during an angular displacement of 2π revolutions mv²2π /r J

To know more about centripetal force :

https://brainly.com/question/13031430

#SPJ4

Answer:

490N

Explanation:

the formula to use for perpendicular force is:

now we plug in:

*for g, it can be 9.8 m/s^2 or 10 m/s^2 depending on your teacher

[tex]Fg=(100)(9.8)(cos60)[/tex]

then you get:

[tex]Fg=490N[/tex]

Answer:

high=125m

speed up=50m s-¹

Explanation:

consider acceleration due to gravity = 10m s-²

upward as positive

in t=5s

ball rest momentarily velocity=0

you can know this by drawing s-t graph

consider the upward movement t=0-5s

we now have v=0 t=5 a= -10 and need find u

so use a=[v-u]/t

-10=[0-u]/5

-50=-u

u=50 ms-¹

then let find the displacement

s = (v+u)t*1/2

s= 50*5*1/2

s=125m

It's possible to transfer electric charge to an object so that its net electric charge is 6.5 times the fundamental electric charge e. it is a false statement. because any charge can only be integral multiple of the fundamental charge e.

A neutral body gets charged if it gains or losses some electrons.

There are two types of charges: positive charge and negative charge.

It is the property of substances due to which a body produce and experience electric effect.

S.I. unit of charge is coulomb.

Q = It

Where, Q = charge,

I = electric current,

t = time

charge is quantised. it means that charge on a body is always equal to the integral multiple of basic unit of charge i.e. charge of one electron.

Q = ne

e = 1.6 ×10^-19 C .

A charge of magnitude 1C contains about 6×10^18 electrons.

Learn more about eclectic charge here :

brainly.com/question/2373424

#SPJ4

The force on the wire will be

F = 5.46 Newton.

We have a current carrying wire in a uniform magnetic field.

We have to determine the magnitude of the magnetic force on the wire assuming the angle between the magnetic field and the current is 60.0°.

The force on the current carrying wire will be -

F = IBL sinθ

According to the question, we have -

L = 2.80 m

I = 5 A

B = 0.39 T

Therefore -

F = IBL sinθ

F = 5 x 0.39 x 2.80 x sin(90)

F = 5.46 x sin(90)

F = 5.46 Newton

Hence, the force on the wire will be

F = 5.46 Newton

To solve more questions on Magnetic field intensity, visit the link below-

brainly.com/question/13103888

#SPJ4

The magnitude of the magnetic force on the wire 5.46 N.

To find the magnetic force, the values given are:

Length A = 2.80m

Current I = 5 A

Magnetic field B = 0.390 T

Angle = 90° .

What is meant by magnetic force?

                      F =iBLsinθ Newton

Substituting the values given,

Magnetic force,

F = 5 A × 0.390 T × 2.80 m × Sin 90°

  = 5 A × 0.390 T × 2.80 m × 1

F = 5.46 N.

The magnitude of the magnetic force on the wire 5.46 N.

Learn more about Magnetic force,

https://brainly.com/question/28446452

#SPJ4

[tex]1.58\times 10^{-4}\ \mathrm{s}$[/tex] is the time interval elapses before the back end of the rod receives the message that it should stop.

Given:

Length of the rod, L = 80 cm = 0.800 m

Young's modulus, Y = [tex]20 \times 10^{10}\;N/m^{2}[/tex]

steel density, [tex]\rho = 7.86 \times 10^{3}\;kg/m^{3}[/tex]

The speed of the wave in the rod is,

[tex]$v = \sqrt{\frac{Y}{\rho}} = \sqrt{\frac{20\times 10^{10}\ \mathrm{N/m^2}}{7.86\times 10^3\ \mathrm{kg/m^3}}} = 5044\ \mathrm{m/s}$[/tex]

Consequently, the length of the rod's end is traveled by the wave in at

[tex]$t=\frac{L}{v} = \frac{0.800\ \mathrm{m}}{5044\ \mathrm{m/s}} = 1.58\times 10^{-4}\ \mathrm{s}$[/tex]

Hence, [tex]1.58\times 10^{-4}\ \mathrm{s}$[/tex] is the time interval elapses before the back end of the rod receives the message that it should stop.

The three fundamental laws of classical mechanics known as Newton's laws of motion describe how an object's motion and the forces acting on it interact. The following paraphrase of these statutes is available

Unless a force acts upon a body, it remains at rest or in continual straight-line motion.

When a force acts on a body, the force is equal to the time rate at which the body's momentum changes.

When two bodies exert force on one another, the direction and amount of the force are opposed.

Isaac Newton first identified the three laws of motion in his 1687 book Philosophize Naturalis Principia Mathematica (Mathematical Principles of Natural Philosophy).

They served as the cornerstone for classical mechanics as Newton used them to examine and explain the motion of numerous physical objects and systems. The conceptual foundations of classical physics have been reconstructed in several ways since Newton, utilizing various mathematical techniques that have revealed insights that were hidden in the original, Newtonian formulation.

To know more about Newtons Laws, visit:

https://brainly.com/question/27573481

#SPJ4

The situation is possible based on the first law of thermodynamics.

The term thermodynamics has to do with the study of heat. Heat is that which causes the temperature of a body to change. We know that according to the first law of thermodynamics, energy could neither be created nor destroyed but can be converted from one form to another.

The second law of thermodynamics states that, the conversion of energy is not 100% efficient as some of the energy could be lost as heat. We can now fit in the scenario described into the laws of thermodynamics.

We can see that, if we input is 5J of energy transferred by heat, and output is 3J of work plus 2J of energy transferred by heat, then the situation is possible based on the first law of thermodynamics.

Learn more about thermodynamics:https://brainly.com/question/1368306

#SPJ1

Answer:

(1) a) S=D/T

b)5m/s

c)3.33s

(2) a) 1.104m

Explanation:

(1) b) S=D/T

 S=1500/300

 S=5m/s

c) T= V-U/a

 v=10

 u= 2

 a= 2.4

10-2=8/2.4=3.33s

(2) a) d=s×t

 0.46×2.4=1.104m



Positively charged particles of radiation emitted from the decay of radioactive substances are known as alpha particles.

A helium nucleus that some radioactive compounds release that was once thought to be a ray. Ionized alpha particles are made up of two protons, neutrons ( no charge), and no electrons.

Two protons and two neutrons from the atom's nucleus combine to form the positive charge alpha particles (α). The most toxic radioactive materials, such as uranium, radium, and polonium, decay to produce alpha particles.

A ray-like emission of a helium nucleus from some radioactive materials.

More about the alpha particle link is given below.

https://brainly.com/question/2288334

#SPJ4

3.141592653589793238

Explanation:

3.141592653589793238

The sofa with a top speed of 87 mph would travel a distance of 43.5 miles to the mall 1 hour away.

Considering the sofa accelerates constantly throughout the motion,

s = ( u + v )  t / 2

s = Distance

u = Initial velocity

v = Final velocity

t = Time

v = 87 mph

t = 1 hr

u = 0

s = ( u + v )  t / 2

s = ( 0 + 87 ) 1 / 2

s = 43.5 mi

This is an equation of motion.

Therefore, the sofa would travel a distance of 43.5 miles

To know more about equation of motion

https://brainly.com/question/5955789

#SPJ1

If you run off the pavement, you should turn the steering wheel quickly toward the road and is denoted as option C.

This is a path which is found in almost all roads and is designed to enhance foot traffic in most climes. This is the path where individuals walk so as not to get hit down by a vehicle.

In a situation where a car runs into the pavement, the best choice is to turn the steering wheel quickly toward the road as braking hard could damage the brakes of the car and cause accident in subsequent trips.

This is therefore why option C was chosen as the correct choice.

Read more about Pavement here https://brainly.com/question/27960575

#SPJ1

Answer: Steer straight and slow down before attempting

Explanation:

The correct answer is punt/kickoff

In gridiron football, a drive is started with a kickoff. The "kicking team" often kicks the ball to the "receiving team" of the opposite team during a kickoff. Until the player with the ball is tackled by the kicking team, goes out of bounds, scores a touchdown, or the play is otherwise deemed dead, the receiving team is then allowed to return the ball, i.e., attempt to move it towards the kicking team's end zone. Every half of play, the start of various overtime forms, and after scoring plays all feature kickoffs. At the beginning of each half, following a try, and following a successful field goal, the ball is sent into play through a kickoff.

To know more about kickoff refer to https://brainly.com/question/22046036

#SPJ4

Complete question

Happens at the start of the game and after every touchdown. in flag football you may throw or punt the ball. options 1. Interception 2. Fumble

3. Punt/Kickoff  4. Down