A jewelry company purchases a necklace for $24. If they mark it up 36% to sell it at their store, what is the selling price of the necklace?

If George's bicycle has a mass of 15 grams, then it is highly unlikely that he has stated the correct mass, as 15 grams is an extremely low mass for a bicycle.

A typical bicycle weighs anywhere from 7 to 15 kilograms. It is highly unlikely that a bicycle would weigh only 15 grams, as this is much lighter than the lightest bicycle ever made.

Therefore, it is reasonable to assume that George made a mistake and meant to say 15 kilograms instead of grams.

Assuming the mass of the bicycle is 15 kilograms, removing the front wheel will decrease the mass slightly, but not by a significant amount.

The front wheel typically accounts for around 1-2 kilograms of the total mass of the bicycle, so removing it would leave a mass of approximately 14 kilograms.

However, assuming he made a mistake and meant to say 15 kilograms, then the mass of the bicycle without the front wheel would be approximately 14 kilograms.

Learn more about mass

brainly.com/question/19694949

#SPJ11

The zeros of the function y = (x − 4)(x² − 12x + 36) are 4 and 6.

To find the zeros of the function y = (x - 4)(x² - 12x + 36), we need to set y to zero and solve for x.

0 = (x - 4)(x² - 12x + 36)

Now, solve for each factor separately:

1) x - 4 = 0
x = 4

2) x² - 12x + 36 = 0
This is a quadratic equation, and we can factor it as (x - 6)(x - 6).
So, x - 6 = 0
x = 6

The zeros of the function are x = 4 and x = 6. The zeros of a function are the values of its variables that meet the equation and result in the function's value being equal to 0.

Learn more about zeros of the function here: https://brainly.com/question/30207950

#SPJ11

The solution set is a vertical plane parallel to the y-axis and passing through the origin.

V + y = x + y can be simplified by canceling out the common term 'y' on both sides of the equation. This gives:

V = x

This is the equation of a plane in three-dimensional space where the 'x' and 'V' variables correspond to the horizontal and vertical axes respectively. Therefore, the solution set for this equation consists of all points in the plane where the 'V' coordinate is equal to the 'x' coordinate.

In other words, the solution set is a vertical plane parallel to the y-axis and passing through the origin.

To know more about solution, here

https://brainly.com/question/30128654

#SPJ4

--The complete question is, What is the solution set for the equation V + y = x + y?--

steal it

Step-by-step explanation:

Answer:

Option B.

Step-by-step explanation:

Angle SOB and Angle VOK are vertical angles, and thus congruent because all vertical angles are congruent.

Lines SB and KV are parallel, cut by the transversal SV, and Angle S and Angle V are Alternate Interior Angles.  So, Angle S and Angle V are congruent by Alternate Interior Angle congruence.

Therefore, Triangle SOB and Triangle VOK are similar by Angle Angle similarity postulate.

Answer:

The last one.Because the experimental probability is 11 ÷ 50, which is 22%, and the theoretical probability is 1 ÷ 8, which is 12.5%

The interest rate is 4.5%, if the interest is compounded daily on an investment of $350.

To find the interest rate, compound interest formula

A= P(1+r/n)ⁿᵃ

where

A = The amount to be received

P = The Principal

r = The rate of interest

n = number of years (Here interest is compounded on daily basis. So, n =365)

a = Time period in years

Substitute the values in the formula,

790= 350(1+r/365)⁽³⁶⁵⁾⁽¹⁸⁾

790= 350(1+r/365)⁶⁵⁷⁰

790/350= (1+r/365)⁶⁵⁷⁰

Using logarithms property on both sides

ln(790/350)= 6570×ln(1+r/365)

By the property of logarithms, for small values of x ln(1+x) =x

(ln(790/350))/6570= r/365

Therefore

The rate of interest r = 4.5%

To know more about the interest rate here

https://brainly.com/question/30910969

#SPJ4                  

Brody would need an interest rate of 4.5% compounded daily.

How to calculate interest rate of investment?

We can use the compound interest formula to solve the problem:

[tex]A = P(1 + r/n)^(^n^t^)[/tex]

where:

A = final amount of money ($790)

P = initial investment ($350)

r = interest rate (unknown)

n = number of times interest is compounded per year (365, since interest is compounded daily)

t = time in years (18)

So, we can plug in the given values and solve for r:

[tex]790 = $350(1 + r/365)^(^3^6^5^1^8^)[/tex]

[tex]2.25714 = (1 + r/365)^(^3^6^5^1^8^)[/tex]

[tex]ln(2.25714) = ln[(1 + r/365)^(^3^6^5^1^8^)][/tex]

[tex]ln(2.25714) = 18ln(1 + r/365)[/tex]

[tex]ln(2.25714)/18 = ln(1 + r/365)[/tex]

[tex]e^(^l^n^(^2^.^2^5^7^1^4^)^/^1^8^)^ =^ 1^ +^ r^/^3^6^5[/tex]

[tex]1.0345 = 1 + r/365[/tex]

[tex]r/365 = 0.0345[/tex]

[tex]r = 12.5925[/tex]

Therefore, Brody would need an interest rate of approximately 12.6% (rounded to the nearest tenth of a percent) in order to end up with $790 after 18 years with daily compounding.

Learn more about interest

brainly.com/question/30393144

#SPJ11

The first statement about the surface area in the question are false, the second statement about surface area is false and the third statement about surface area is true respectively.

1. False. The surface area of a cone is the sum of the areas of the circular base and the curved lateral surface.

2. False. The surface area of a sphere is given by 4πr^2, while the surface area of a cube with side length s=r is 6r^2. Since 4πr^2 is less than 6r^2 for any value of r, the surface area of a sphere is actually less than the surface area of such a cube.

3. True. The surface area of a composite figure is the sum of the surface areas of each individual figure that make up the composite figure.

To know more about surface area, visit:

https://brainly.com/question/29298005#

#SPJ11

Answer:

Yes, there is evidence at the 10% significance level, but not at the 5% level

Step-by-step explanation:

Look at the p-value in bottom left corner (in the Height row).

It is less than 0.1, but greater than 0.05. Thus, Yes, there is evidence at the 10% significance level, but not at the 5% level. Got it right.

The ratio of the perimeters is 14/5, which simplifies to 70/25, which reduces to 14/5. So the answer is (d) 5/7.

Let's use the fact that the ratio of the areas of two similar triangles is equal to the square of the ratio of their corresponding side lengths. If we let the corresponding side lengths be a and b, then we have:

(area of first triangle)/(area of second triangle) = (a^2)/(b^2)

We are given that the areas of the two triangles are 50 cm^2 and 98 cm^2, respectively. Let's call the side lengths of the first triangle a1, a2, and a3, and the side lengths of the second triangle b1, b2, and b3. Then we have:

(50)/(98) = (a1a2)/(b1b2)

We don't know the actual values of a1, a2, b1, and b2, but we can find the ratio of their perimeters by adding up the side lengths of each triangle. Let's call the perimeters of the first and second triangles P1 and P2, respectively. Then we have:

P1 = a1 + a2 + a3

P2 = b1 + b2 + b3

Dividing P1 by P2, we get:

P1/P2 = (a1 + a2 + a3)/(b1 + b2 + b3)

We can rewrite the ratios of the side lengths using the equation we found earlier:

P1/P2 = [(a1a2)/(b1b2)]*[(a1 + a2 + a3)/(a1 + a2 + a3)]

P1/P2 = [(a1a2)/(b1b2)]*1

P1/P2 = (a1a2)/(b1b2)

We still don't know the values of a1, a2, b1, and b2, but we can eliminate them by using the equation we found earlier:

(50)/(98) = (a1a2)/(b1b2)

Simplifying this expression, we get:

(a1/a2) = sqrt((98/50)*(b1/b2))

We can use this to substitute for one of the ratios of side lengths in the equation for P1/P2:

P1/P2 = [(a1a2)/(b1b2)]*[(a1 + a2 + a3)/(a1 + a2 + a3)]

P1/P2 = [sqrt((98/50)(b1/b2))][(a1 + a2 + a3)/(a1 + a2 + a3)]

P1/P2 = sqrt((98/50)*(b1/b2))

Now we can substitute the given values to get:

P1/P2 = sqrt((98/50)(b1/b2)) = sqrt((98/50)(2/1)) = sqrt(196/50) = 14/5

To know more about perimeters refer to

https://brainly.com/question/19819849

#SPJ11

a. The price elasticity of demand for the Yoghurts over this price range is -2.5

b.  The demand is elastic

c. The change in revenue due to the change in price is GHS 20,000

a. The price elasticity of demand is given by the formula:

Price elasticity of demand = (Percentage change in quantity demanded) / (Percentage change in price)

The percentage change in quantity demanded is (6000 - 4000) / 4000 * 100% = 50%

The percentage change in price is (30 - 40) / 40 * 100% = -20%

Therefore, the price elasticity of demand = 50% / (-20%) = -2.5

b. Since the price elasticity of demand is greater than 1,-2.5. This means that the percentage change in quantity demanded is greater than the percentage change in price.

c. The revenue is given by the formula:

Revenue = Price x Quantity

At a price of GHS 40, the revenue is 4000 x 40 = GHS 160,000

At a price of GHS 30, the revenue is 6000 x 30 = GHS 180,000

Therefore, the change in revenue is GHS 20,000, which is an increase of 12.5%.

Learn more about elasticity at https://brainly.com/question/30910899

#SPJ11

On a company's income statement, gross profit is computed by subtracting the cost of goods sold (COGS) from revenue. (sales),so the sale of palm tree is $143.10.

To find the profit from the sale of 13 palm trees, we need to substitute 13 for x in the profit function:

P(13) = 20(13) - 0.1(13)^2 - 100
P(13) = 260 - 16.9 - 100
P(13) = $143.10

Therefore, the profit from the sale of 13 palm trees is $143.10.

Visit here to learn more about sales

brainly.com/question/31406205

#SPJ11

Converting time from the 12-hour clock format to the 24-hour clock format, and vice versa, can be a bit confusing at times, but it's not that difficult once you know how to do it.

To convert from the 12-hour clock format to the 24-hour clock format, simply add 12 hours to any time after 12:00 p.m. For example, if it's 3:00 p.m., you add 12 hours to get 15:00 (3:00 p.m. in 24-hour format). If it's 11:00 p.m., you add 12 hours to get 23:00 (11:00 p.m. in 24-hour format).

Conversely, to convert from the 24-hour clock format to the 12-hour clock format, simply subtract 12 hours from any time after 12:00 p.m. For example, if it's 16:00 (4:00 p.m.) in 24-hour format, you subtract 12 hours to get 4:00 a.m. in the 12-hour format. If it's 22:00 (10:00 p.m.) in 24-hour format, you subtract 12 hours to get 10:00 a.m. in the 12-hour format.

To help you with these conversions, here is a table with some examples:

| 12-hour clock format | 24-hour clock format |
|---------------------|---------------------|
| 12:00 a.m.          | 00:00               |
| 1:00 a.m.           | 01:00               |
| 2:00 a.m.           | 02:00               |
| 3:00 a.m.           | 03:00               |
| 4:00 a.m.           | 04:00               |
| 5:00 a.m.           | 05:00               |
| 6:00 a.m.           | 06:00               |
| 7:00 a.m.           | 07:00               |
| 8:00 a.m.           | 08:00               |
| 9:00 a.m.           | 09:00               |
| 10:00 a.m.          | 10:00               |
| 11:00 a.m.          | 11:00               |
| 12:00 p.m.          | 12:00               |
| 1:00 p.m.           | 13:00               |
| 2:00 p.m.           | 14:00               |
| 3:00 p.m.           | 15:00               |
| 4:00 p.m.           | 16:00               |
| 5:00 p.m.           | 17:00               |
| 6:00 p.m.           | 18:00               |
| 7:00 p.m.           | 19:00               |
| 8:00 p.m.           | 20:00               |
| 9:00 p.m.           | 21:00               |
| 10:00 p.m.          | 22:00               |
| 11:00 p.m.          | 23:00               |

In conclusion, converting time from the 12-hour clock format to the 24-hour clock format and vice versa is an essential skill to have, especially for those who work in industries that require precise timing. With a bit of practice, anyone can easily master this skill and use it effectively in their day-to-day lives.

To know more about 12-hour clock format refer here

https://brainly.com/question/23719804#

#SPJ11

It is also possible that there may not be a clear relationship between the two variables or that there may be other factors that influence the number of coats sold, such as seasonal trends or fashion trends.

In mathematics, a variable is a symbol or letter that represents a quantity that can vary or take on different values in a given situation or equation. Variables are commonly denoted by letters such as x, y, z, a, b, c, etc. They are used to represent unknown or changing quantities in mathematical expressions or equations.

For example, in the equation y = 2x + 3, x and y are variables. x represents an unknown value, while y represents the value that results from the equation for a particular value of x. In this case, the variable x can take on different values, and the corresponding value of y will change accordingly.

Variables are used in a wide range of mathematical concepts, such as algebra, calculus, and statistics, to represent and manipulate different quantities and relationships between them.

It is reasonable to expect that there is a negative correlation between the number of coats sold and the outside temperature. In other words, as the temperature gets colder, the number of coats sold would increase, and as the temperature gets warmer, the number of coats sold would decrease. This is because colder temperatures would typically prompt people to buy more coats to stay warm, while warmer temperatures would make people less likely to buy coats. However, it is also possible that there may not be a clear relationship between the two variables or that there may be other factors that influence the number of coats sold, such as seasonal trends or fashion trends.

To know more about factors, visit:

https://brainly.com/question/14067703

#SPJ1

The function f(x) = (x + 6)/(2-6) does not have any critical values. A critical value of a function is a value of x where the derivative of the function is either zero or undefined.

However, in this case, the denominator of f(x) is a constant, so the derivative of f(x) is simply the derivative of the numerator divided by the constant denominator.

The derivative of the numerator is 1, so the derivative of f(x) is simply 1/(2-6) = -1/4. Since the derivative is a constant, it is never zero or undefined, and so there are no critical values for this function.Explanation: To find the critical values of a function, we need to find the values of x where the derivative of the function is either zero or undefined. However, in this case, the denominator of f(x) is a constant, so the derivative of f(x) is simply the derivative of the numerator divided by the constant denominator. The derivative of the numerator is 1, so the derivative of f(x) is simply 1/(2-6) = -1/4. Since the derivative is a constant, it is never zero or undefined, and so there are no critical values for this function. Therefore, the answer is None.

For more similar questions on topic derivative

brainly.com/question/23819325

#SPJ11

The expression |y-x| without absolute value is simply: y-x

In mathematics, the absolute value refers to the magnitude or numerical value of a real number without considering its sign. It gives the distance of the number from zero on the number line. The absolute value of a number x is denoted by |x| and is defined as follows:

If x is positive or zero, then |x| = x.

If x is negative, then |x| = -x (the negative sign is removed).

Since y > x, the difference (y-x) will be positive. The absolute value of a positive number is the number itself. Therefore, the expression |y-x| without absolute value is simply: y-x

Learn more about absolute value here, https://brainly.com/question/24368848

#SPJ11

The correct answer is 904.78 cm2

The polygon described by the given vertices is a trapezoid.

A trapezoid is a quadrilateral with at least one pair of parallel sides. In this case, the sides with endpoints (0,0) and (16,0) are parallel to each other, and the sides with endpoints (4,8) and (12,8) are parallel to each other. Therefore, the polygon described by the given vertices is a trapezoid.

In addition to having parallel sides, a trapezoid can have various other properties, such as being isosceles (having two equal sides) or having perpendicular diagonals. However, based solely on the given vertices, we can determine that the polygon is a trapezoid.

A trapezoid has various properties, including having one pair of parallel sides, having one pair of non-parallel sides, and having two pairs of adjacent angles that add up to 180 degrees. It can also be isosceles if the non-parallel sides are equal in length.

The trapezoid is a commonly studied shape in geometry because of its simple properties and its appearance in many real-world applications, such as in architecture and engineering. Trapezoids are used in the design of roofs, bridges, and other structures that require stable, load-bearing shapes.

Learn more about trapezoids

brainly.com/question/8643562

#SPJ11

The height of the triangular face of a triangular prism with a length of 15 feet and a base of 10 feet, and a volume of 945 cubic feet is 12.6 feet."

The formula for the volume of a triangular prism is given by:

Volume = (1/2) x base x height x length

where base and height refer to the base and height of the triangular face, and length refers to the length of the prism.

Substituting the given values, we have:

945 = (1/2) x 10 x height x 15

Simplifying:

945 = 75 x height

Dividing both sides by 75:

height = 945/75

height = 12.6 feet

For more questions on triangular prism

https://brainly.com/question/23178481

#SPJ11

The function f(x) = 11x - 11e^(-x) is concave upward on the interval (-∞, ln(11)) and concave downward on the interval (ln(11), ∞). The inflection point is at x = ln(11).

Find the first and second derivatives of the function f(x):

f'(x) = 11 + 11e^(-x)

f''(x) = 11e^(-x)

Set the second derivative equal to zero to find any potential inflection points:

11e^(-x) = 0

e^(-x) = 0

There are no solutions to this equation, so there are no inflection points in the function.

Determine the sign of the second derivative on either side of the potential inflection point(s) to identify the intervals of concavity:

For x < ln(11), e^(-x) > 0, so f''(x) > 0, meaning the function is concave upward on the interval (-∞, ln(11)).

For x > ln(11), e^(-x) < 0, so f''(x) < 0, meaning the function is concave downward on the interval (ln(11), ∞).

Therefore, the final answer is: The function f(x) = 11x - 11e^(-x) is concave upward on the interval (-∞, ln(11)) and concave downward on the interval (ln(11), ∞). The inflection point is at x = ln(11).

For more questions like Function click the link below:

https://brainly.com/question/16008229

#SPJ11

To find the angle between two planes, we need to find the cosine of the angle between their normal vectors. The normal vector of the first plane is (4, 0, -1) and the normal vector of the second plane is (24, -1, 0).

Using the dot product formula, we have:

cos(theta) = (4, 0, -1) · (24, -1, 0) / ||(4, 0, -1)|| ||(24, -1, 0)||

= (96 + 0 + 0) / (sqrt(16 + 1) * sqrt(576 + 1))

= 96 / sqrt(33217)

Using a calculator, we get:

cos(theta) ≈ 0.00575

Therefore, the angle between the two planes is:

theta ≈ acos(0.00575)

theta ≈ 89.59 degrees

Rounded to two decimal places, the angle between the two planes is approximately 89.59 degrees.
To find the angle between the two given planes, we first need to rewrite the equations in their standard form and find the normal vectors for each plane.

Plane 1: -4x + y + 7 = 4
Standard form: -4x + y + 0z = -3
Normal vector N1: <-4, 1, 0>

Plane 2: 24x - 6y + 42 = 16
Standard form: 24x - 6y + 0z = -26
Normal vector N2: <24, -6, 0>

Now, we can find the angle θ between the two planes by using the formula:

cos(θ) = (N1 • N2) / (||N1|| ||N2||)

First, calculate the dot product (N1 • N2):
N1 • N2 = (-4 * 24) + (1 * -6) + (0 * 0) = -102

Next, calculate the magnitudes of the normal vectors:
||N1|| = sqrt((-4)^2 + 1^2 + 0^2) = sqrt(17)
||N2|| = sqrt(24^2 + (-6)^2 + 0^2) = sqrt(576+36) = sqrt(612)

Now, we can find cos(θ):
cos(θ) = (-102) / (sqrt(17) * sqrt(612))

Finally, calculate the angle θ (in degrees) by taking the inverse cosine:
θ = arccos((-102) / (sqrt(17) * sqrt(612))) = 44.41° (rounded to two decimal places)

So, the angle between the two planes is 44.41°.

To learn more about vectors visit;

brainly.com/question/29740341

#SPJ11

The best point estimate for the population mean score on the nationwide examination in psychology is the sample mean of 492.

When we take a sample from a population, the sample mean is a point estimate of the population mean. A point estimate is an estimate of a population parameter based on a single value or point in the sample. In this case, the sample mean of 492 is the best point estimate for the population mean, because it is an unbiased estimator.

An estimator is unbiased if it is expected to be equal to the true population parameter. In this case, the expected value of the sample mean is equal to the population mean. This means that if we were to take many different samples from the population and calculate the sample mean for each sample, the average of all these sample means would be equal to the population mean.

Learn more about sample mean here

brainly.com/question/14127076
#SPJ4

The given question is incomplete, the complete question is:

You would like to construct a 95% confidence interval to estimate the population mean score on a nationwide examination in psychology, and for this purpose we choose a random sample of exam scores. The sample we choose has a mean of 492 and a standard deviation of 78. What is the best point estimate, based on the sample, to use for the population mean?

As a result of being more dispersed, sample A has a broader 95% confidence interval.

Given that sample A had a higher standard deviation and that we are aware that when standard deviation rises, the margin of error likewise does, widening the confidence interval as a result.

The average squared departure of each observation from the mean is the standard deviation's square root.  In other words, it tells you how much the data points deviate from the average value.

Standard deviation is often used as a tool in statistical analysis to help determine the reliability of data. For example, if you were measuring the heights of a group of people, a low standard deviation would suggest that the majority of the people are around the same height, while a high standard deviation would suggest that there is a wider range of heights in the group.

To learn more about Standard deviation visit here:

brainly.com/question/13498201

#SPJ4

If password begin with capital letter followed by lower case letter, and end with symbol , then the number of unique passwords which can be created using letters and symbols are 47525504.

The password must have 6 characters and the first character must be a capital letter, so, we have 26 choices for the first character.

For the second character, we have 26 choices for a lower-case letter.

For the third, fourth, and fifth characters, we can choose from any of the 26 letters (upper or lower case).

For the last character, we have 4 choices for the symbol

So, total number of unique passwords that can be created is:

⇒ 26 × 26 × 26 × 26 × 26 × 4 = 26⁵ × 4 = 47525504.

Therefore, there are 47525504 unique passwords that can be created using these letters and symbols.

Learn more about Passwords here

https://brainly.com/question/29173702

#SPJ1

Salazar will have a profit of $441 if they redeem all 140 shares(B).

Salazar's initial investment of $2,993.20 for 140 shares means that the purchase price per share was $2,993.20/140 = $21.38. After one year, the net asset value per share has increased to $24.53, so the value of Salazar's 140 shares is 140 x $24.53 = $3,435.40.

To calculate the profit or loss, we need to subtract the initial investment from the current value, which gives a profit of $3,435.40 - $2,993.20 = $442.20.

However, we need to take into account any fees or expenses associated with redeeming the shares. Since the question states that it is a no-load fund, we can assume that there are no fees, and thus Salazar's profit is $441(B).

For more questions like Investment click the link below:

https://brainly.com/question/15105766

#SPJ11

The maximal area of a right triangle with hypotenuse of length 3 is 0.

Let's call the legs of the right triangle a and b.

Since the hypotenuse has length 3, we know that a² + b² = 3² = 9

The area of the triangle is given by A = 1/2 ab.

We want to maximize A subject to the constraint a² + b²= 9.

One way to do this is to use the method of Lagrange multipliers.

We want to maximize the function f(a, b) = 1/2 ab subject to the constraint g(a, b) = a²+ b² - 9= 0. The Lagrangian is then:

L(a, b, λ) = f(a, b) - λg(a, b) = 1/2 ab - λ(a² + b² - 9)

To find the maximum, we need to solve the system of equations:

Taking the partial derivatives and setting them equal to zero, we get:

Solving the first two equations for a and b in terms of λ and plugging them into the third equation,

we get:

4λ² + 1 = 0

Then from the constraint a² + b² = 9, we have a = ±3.

The area of the triangle in this case is A = 1/2 ab = 0.

Therefore, the maximal area of a right triangle with hypotenuse of length 3 is 0, and it is achieved when one of the legs has length 0.

Learn more about maximal area

brainly.com/question/27883822

#SPJ11

The rate of return is 19%, rounded to the nearest tenth.

Given that a purchased for $ 20/share, are sold for $ 720. $ 6 is the  commission on the sale. We need to calculate the total cost of the investment and the total proceeds from the sale, and then use the formula for rate of return.

The total value should be

= 20 × 30

= $ 600

Since, it is sold for $ 720 along with commission of $6 so final money should be  

= 720 - 6

= $ 714.

Now rate of return is

= (714 - 600)/714*100

= 114/600*100

= 19%

Therefore, the rate of return is 19%, rounded to the nearest tenth.

Learn more about Rate of Return here

brainly.com/question/21691170

#SPJ4

We can use the Law of Cosines to solve this problem. Let's call the starting point A, the point where the yacht turns B, and the final destination C.

Then we can use the given distances to find the length of each side of the triangle ABC, and the angles to find the angle opposite each side.

Using the angle opposite side AB as a reference angle, we can find the other angles as follows:

Angle BAC = 180° - (71° + 63°) = 46°

Angle ABC = 180° - (46° + 90°) = 44°

Now we can use the Law of Cosines:

[tex]AC^2 = AB^2 + BC^2 - 2ABBCcos(44°)[/tex]

[tex]AC^2 = (141)^2 + (213)^2 - 2(141)(213)*cos(44°)[/tex]

AC ≈ AC^2 = AB^2 + BC^2 - 2ABBCcos(44°)(rounded to the nearest hundredth)

Therefore, the distance from the starting point is approximately 281.21 miles.

To know more about Law of Cosines refer here

https://brainly.com/question/28547725#

#SPJ11