The steep-rise interval in the weak acid-strong base curve is more pronounced than in the strong acid-strong base curve because the weak acid requires more titrant to be neutralized than the strong acid, so the pH changes more slowly initially.
A. The initial pH for the weak acid-strong base curve is higher than the initial pH for the strong acid-strong base curve.
This statement is inaccurate. In fact, the initial pH for the weak acid-strong base curve is lower than the initial pH for the strong acid-strong base curve. This is because a weak acid has a higher initial pH than a strong acid due to the lower concentration of H+ ions in solution.
B. At the equivalence points, the pH of the weak acid-strong base is greater than the pH of the strong acid-strong base.
This statement is accurate. At the equivalence point of a weak acid-strong base titration, the pH is greater than 7 due to the presence of the conjugate base of the weak acid in solution. At the equivalence point of a strong acid-strong base titration, the pH is 7.
C. At the half-equivalence points, the pH of the weak acid-strong base is greater than the pH of the strong acid-strong base.
This statement is accurate. At the half-equivalence point of a weak acid-strong base titration, the pH is greater than 7 because the solution contains both the weak acid and its conjugate base. At the half-equivalence point of a strong acid-strong base titration, the pH is 7.
D. The steep-rise interval in the weak acid-strong base curve is more pronounced than in the strong acid-strong base curve.
Learn more about concentration here:
https://brainly.com/question/13872928
#SPJ1
consider the possible acid-base reactions and answer the following question: which buffer will have the greatest capacity resistance to changes in ph upon the addition of limited amounts of bases? group of answer choices 1.287m nac2h3o2 and 0.487m hc2h3o2 0.287m nac2h3o2 and 0.387m hc2h3o2 0.687m nac2h3o2 and 0.987m hc2h3o2 they have the same capacity 0.987m nac2h3o2 and 1.287m hc2h3o2 0.987m nac2h3o2 and 0.387m hc2h3o2
This means that a buffer solution can resist changes in pH caused by small amounts of added acid or base.
When answering questions on Brainly, a question-answering bot should always be factually accurate, professional, and friendly. Additionally, it should be concise and not provide extraneous amounts of detail.
Typos or irrelevant parts of the question should not be ignored, and the bot should use the terms specified in the question when answering.
Considering the possible acid-base reactions, the buffer that will have the greatest capacity resistance to changes in pH upon the addition of limited amounts of bases is 0.987M NaC2H3O2 and 1.287M HC2H3O2.
This is because the buffer with the highest concentration of weak acid and weak base will have the greatest buffer capacity.A buffer solution is a solution that resists changes in pH when small amounts of acid or base are added to it.
A buffer consists of a weak acid and its conjugate base or a weak base and its conjugate acid. These buffer solutions work by reacting with any added acid or base to form an equilibrium that minimizes the change in pH.
To learn more about : acid
https://brainly.com/question/25148363
#SPJ11
Stoichiometry
These questions already have the answers I just need the work in the boxes please. You don’t even have to explain it please just set it up for me. I will Venmo 40$ to you aswell.
The image shows a balanced chemical equation:
2H₂(g) + O₂(g) → 2H₂O(g)
How are the electron configurations of elements arranged in the periodic table?The electron configurations of elements are arranged in rows and columns in the periodic table based on their increasing atomic numbers. The rows, called periods, represent the number of electron shells in each element, while the columns, called groups, represent the number of valence electrons.
What is the significance of the atomic number in the periodic table?The atomic number of an element determines its position in the periodic table. Elements with similar chemical properties are arranged in the same group, and the number of valence electrons in the outermost shell of an element corresponds to its position in the periodic table.
Thus, the atomic number provides a way to predict the chemical behavior of an element and its position in the periodic table.
To know more about elements,visit:
https://brainly.com/question/13025901
#SPJ1
if the concentration of 1-iodopropane doubles and the concentration of sodium hydroxide quadruples in this sn2 reaction, how much faster is the reaction rate? ch7 d2 q1.pdf
The concentration of 1-iodopropane doubles and the concentration of sodium hydroxide quadruples, the reaction rate of this SN2 reaction is 8 times faster.
To determine how much faster the reaction rate is when the concentration of 1-iodopropane doubles and the concentration of sodium hydroxide quadruples in this SN2 reaction, follow these steps:
1. Recall the rate law for an SN2 reaction:
rate = [tex]k[A][B][/tex], where k is the rate constant, and [A] and [B] represent the concentrations of the two reactants.
2. Let the initial concentrations of 1-iodopropane and sodium hydroxide be [A] and [B], respectively. Then, the initial reaction rate is:
Initial rate = [tex]k[A][B][/tex].
3. Now, the concentration of 1-iodopropane doubles (2[A]) and the concentration of sodium hydroxide quadruples (4[B]).
4. Calculate the new reaction rate with these adjusted concentrations:
New rate = [tex]k(2[A])(4[B]) = 8k[A][B][/tex].
5. To find how much faster the reaction rate is, divide the new rate by the initial rate:
(new rate / initial rate) = [tex]\frac{(8k[A][B])}{(k[A][B])}[/tex].
6. Simplify the expression:
[tex]\frac{(8k[A][B])}{(k[A][B])}=8[/tex]
So, when the concentration of 1-iodopropane doubles and the concentration of sodium hydroxide quadruples, the reaction rate of this SN2 reaction is 8 times faster.
Learn more about reaction rate here:
brainly.com/question/30546888
#SPJ11
Explain what happens to a hurricane once it hits land and travels across the land
As the hurricane moves over land, the hurricane is no longer fueled by this moisture. Therefore, the hurricane begins to slow down and die as it moves further inland. Hurricanes usually weaken when they hit land, because they are no longer being fed by the energy from the warm ocean waters.
what is an intermediate in chemistry a point on the reaction pathway that has a discrete minima.
An intermediate in chemistry is a substance that is generated in the middle of a chemical reaction and consumed after that point in the reaction pathway.
It can also be a point on the reaction pathway that has a discrete minimum value or point. An intermediate is generated during the rate-determining phase of a reaction, which is the slowest step in a reaction mechanism.
As a result, intermediates have a short lifespan since they are quickly converted to products.
The existence of intermediates is often demonstrated by kinetic studies, where a chemical reaction is observed over time. They are critical in organic chemistry because they can influence reaction rates and mechanisms.
Intermediates are usually unstable and reactive since they contain a high level of energy, making them susceptible to additional reactions leading to the products that are formed at the end of the reaction.
To know more about reaction pathway refer to-
brainly.com/question/16047003#
#SPJ11
discuss the relative importance of various mechanical and chemical factors in producing respiratory variations.
Respiratory variations can be influenced by a variety of mechanical and chemical factors. Mechanical factors include changes in lung volume and airway resistance, while chemical factors include changes in blood oxygen and carbon dioxide levels. The relative importance of these factors in producing respiratory variations can depend on a variety of factors, including the individual's health status, level of physical activity, and environmental conditions.
In healthy individuals, mechanical factors such as changes in lung volume and airway resistance play a primary role in producing respiratory variations. For example, during exercise or physical activity, increased demand for oxygen can lead to deeper and more frequent breaths as the lungs work harder to supply oxygen to the body. Conversely, during periods of relaxation or sleep, respiratory rate and volume decrease as the body's oxygen demand decreases.
Chemical factors can also play a significant role in producing respiratory variations. Changes in blood oxygen and carbon dioxide levels can stimulate the respiratory center in the brain, leading to changes in breathing rate and depth. For example, when blood carbon dioxide levels increase, the respiratory center is stimulated, causing an increase in breathing rate and depth to remove excess carbon dioxide from the body.
Overall, while both mechanical and chemical factors can contribute to respiratory variations, the relative importance of these factors can vary depending on the individual and their circumstances. Understanding the interplay between these factors can be important for managing respiratory conditions and promoting respiratory health.
The relative importance of each factor depends on the specific situation and individual conditions. Generally, chemical factors are more important in regulating breathing and maintaining homeostasis, while mechanical factors are essential for the proper functioning of the respiratory system.
The relative importance of mechanical and chemical factors in producing respiratory variations can be discussed by examining their roles in regulating breathing and maintaining homeostasis.
1. Mechanical Factors:- Lung compliance: It refers to the ease with which lungs can be expanded. Higher compliance means the lungs can expand more easily, resulting in a lower breathing effort. Changes in lung compliance can lead to variations in respiratory patterns.
- Airway resistance: The resistance encountered by the airflow in the respiratory tract determines the ease of breathing. Increased airway resistance can lead to respiratory variations, such as difficulty in breathing.
- Chest wall and diaphragm movement: The coordinated contraction and relaxation of the diaphragm and chest wall muscles play a crucial role in breathing. Any abnormalities in these movements can lead to respiratory variations.
- Oxygen levels: Low oxygen levels in the blood (hypoxia) can lead to increased breathing rate and depth to maintain proper oxygen supply to the tissues.
- Carbon dioxide levels: High carbon dioxide levels in the blood (hypercapnia) stimulate chemoreceptors, which in turn increase the breathing rate and depth to eliminate excess [tex]CO_2[/tex] from the body.
- Hydrogen ion concentration (pH): Chemoreceptors also respond to changes in blood pH. Acidosis (low pH) due to high hydrogen ion concentration can increase the breathing rate and depth to eliminate [tex]CO_2[/tex] and restore the pH balance.
To know more about respiratory system
brainly.com/question/22182638
#SPJ11
olive oil is a liquid , so it contains mostly unsaturated fatty acids. these fatty acids have choose... intermolecular forces and choose... melting points.
Fatty acids are essential components of lipids and play an important role in the structure and function of biological membranes that are related to presence of double bonds in the hydrocarbon chains of unsaturated fatty acids.
Unsaturated fatty acids have weaker intermolecular forces than saturated fatty acids, which means that they have lower melting points. This is because unsaturated fatty acids have one or more double bonds in their hydrocarbon chains, which introduce kinks in the chains and prevent them from packing closely together. As a result, unsaturated fatty acids have more disordered and loosely packed structures, which makes them more prone to breaking apart and melting at lower temperatures compared to saturated fatty acids with stronger intermolecular forces and higher melting points.
Therefore, olive oil, which contains mostly unsaturated fatty acids, has weaker intermolecular forces and lower melting points than a solid fat like butter, which contains mostly saturated fatty acids.
Learn more about Fatty acids here:
brainly.com/question/30712004
#SPJ4
a student obtained a wet burette from the cart but failed to rinse it with a small amount of the base before starting a titration. will more or less titrant (base) be required to neutralize the acid?
The student failed to rinse a wet burette with a small amount of base before starting a titration. The student would need more titrant (base) to neutralize the acid than if they had rinsed the burette before starting the titration.
The reason for this is that when a wet burette is not rinsed with the titrant, the remaining water in the burette can dilute the titrant, thereby decreasing its concentration. If the titrant is diluted, more of it would be required to neutralize the same amount of acid. This would result in a titration that requires more titrant (base) to neutralize the acid than if the burette had been properly rinsed with the base.
In other words, not rinsing the burette with a small amount of base can affect the accuracy of the titration results. It is, therefore, important to properly rinse the burette with the titrant before starting a titration to avoid diluting the titrant and ensure accurate titration results.
In conclusion, more titrant (base) would be required to neutralize the acid if a wet burette is not rinsed with a small amount of base before starting a titration. It is essential to rinse the burette before starting a titration to avoid dilution of the titrant and ensure accurate titration results.
for more such question on titration
https://brainly.com/question/186765
#SPJ11
Find the area of the shaded region of the trapezoid. A. 364 sq. units B. 130 sq. units C. 429 sq. units D. 663 sq. units
the area of the shaded region of the trapezoid. is 270 - 45 = 225 sq. units. Thus, the answer is option A which is 225 sq. units.
To find the area of the shaded region in the trapezoid, we need to subtract the area of the smaller triangle from the area of the larger triangle. The height of both triangles is the same, so we only need to find the bases.
The base of the larger triangle is the sum of the bases of the trapezoid, which is 15 + 30 = 45 units. The height of the triangle is 12 units, so the area of the larger triangle is (1/2) x 45 x 12 = 270 sq. units.
To find the base of the smaller triangle, we need to subtract the length of the shorter base of the trapezoid (15 units) from the longer base (30 units) and divide by 2. So, the base of the smaller triangle is (30 - 15)/2 = 7.5 units. The area of the smaller triangle is (1/2) x 7.5 x 12 = 45 sq. units.
Therefore, the area of the shaded region is 270 - 45 = 225 sq. units. Thus, the answer is option A which is 225 sq. units.
The correct question is :Find the area of the shaded region of the trapezoid.
A. 225 sq. units
B. 130 sq. units
C. 429 sq. units
D. 663 sq. units
To know more about trapezoid, visit:
https://brainly.com/question/22227061
#SPJ1
a trial run takes 42 seconds for the blue color to appear. the rate of reaction for this trial will be
The rate of reaction is 0.001 M/s. The answer is option e.
The rate of a reaction refers to the change in concentration of reactants or products per unit time. It is typically expressed in units of M/s, where M refers to the molarity of the solution (moles of solute per liter of solution). The rate constant (k) for a first-order reaction can be calculated using the half-life equation t1/2 = ln(2)/k.
In this case, t1/2 = 100 seconds, so k = ln(2)/t1/2 = 0.0069 s^-1.
The rate of reaction can be calculated using the first-order rate law, rate = k[A], where [A] is the concentration of the reactant.
Substituting the value, we get
rate = 0.0069 x 0.01 = 0.000069 M/s,
which is approximately equal to 0.001 M/s. Therefore, the answer is option e.
To know more about reaction, here
brainly.com/question/5102843
#SPJ4
--The complete question is. What is the rate of the reaction in M/s for Experiment 3, given that the concentration of one of the reactants or products is 0.01 M and the reaction follows first-order kinetics? The time it takes for the reaction to reach half completion is 100 seconds. The options provided are 0.22, 0.11, 0.005, 0.01, and 0.001 M/s.--
Imagine you have three tuning forks of frequencies 250, 500 and 1000 Hz. Which one would:
A) sound the lowest
B) have the highest pitch
If we have three tuning forks of frequencies 250, 500 and 1000 Hz then the tuning fork of 250 Hz would sound the lowest and the tuning fork of 1000 Hz would have the highest pitch.
A.) The tuning fork of 250 Hz would sound the lowest, as it has the lowest frequency among the three. Frequency measures the number of oscillations per second of a wave so the 250 Hz wave will have fewer oscillations per second than the 500 Hz and 1000 Hz waves, resulting in a lower pitch. A lower frequency means that the sound waves are closer together, producing a lower, deeper sound.
B) The tuning fork of 1000 Hz would have the highest pitch, as it has the highest frequency. The 1000 Hz wave will have more oscillations per second than the 250 Hz and 500 Hz waves, resulting in a higher pitch. A higher frequency means that the sound waves are farther apart, producing a higher, more piercing sound.
To learn more about frequency click here brainly.com/question/14320803
#SPJ1
When 1.00g of nylon is burnt in excess oxygen, it produces 2.50g of carbon dioxide. What is the percentage of carbon in nylon?
The mass percentage of carbon in nylon is approximately 68.1%.
What is mass of carbon?
The first step is to calculate the amount of carbon in 2.50g of carbon dioxide, using the molar mass of carbon and carbon dioxide:
1 mole of carbon has a mass of 12.01g
1 mole of carbon dioxide has a mass of 44.01g (12.01g for carbon + 2(16.00g) for oxygen)
So, the mass of carbon in 2.50g of carbon dioxide is:
(12.01g / 44.01g) x 2.50g = 0.681g
This means that the original 1.00g of nylon must have contained 0.681g of carbon. To find the percentage of carbon in nylon, we divide the mass of carbon by the mass of nylon and multiply by 100:
(0.681g / 1.00g) x 100% = 68.1%
Therefore, the percentage of carbon in nylon is approximately 68.1%.
To know more about nylon, visit:
https://brainly.com/question/10278626
#SPJ1
Complete question is: When 1.00g of nylon is burnt in excess oxygen, it produces 2.50g of carbon dioxide. the percentage of carbon in nylon is approximately 68.1%.
when the following equation is balanced properly under acidic conditions, what are the coefficients of the species shown? hno3 fe no fe2 water appears in the balanced equation as a fill in the blank 5 (reactant, product, neither) with a coefficient of . (enter 0 for neither.) how many electrons are transferred in this reaction?
Two electrons are transferred in this reaction
When answering questions on the platform Brainly, you should always be factually accurate, professional, and friendly. Additionally, you should be concise and do not provide extraneous amounts of detail. You should not ignore any typos or irrelevant parts of the question.
How to balance the equation HNO3 + Fe --> NO + Fe2+ under acidic conditions?In order to balance the equation HNO3 + Fe --> NO + Fe2+ under acidic conditions, follow the below steps:
First of all, write down the unbalanced equation:
HNO3 + Fe --> NO + Fe2+Add the coefficients to balance the iron atoms:
HNO3 + Fe --> NO + Fe2+Balance the hydrogen atoms by adding H+ ions on the left side:
HNO3 + Fe + H+ --> NO + Fe2+Add the electrons to balance the charges:
HNO3 + Fe + H+ + e- --> NO + Fe2+Now, add the electrons to the other side:
HNO3 + Fe + H+ + e- --> NO + Fe2+ + e-Balance the nitrogen atoms by adding H2O to the right side:
HNO3 + Fe + H+ + e- --> NO + Fe2+ + e- + H2OThe balanced equation is:
HNO3 + Fe + 3H+ + e- --> NO + Fe2+ + 2e- + H2O
What are the coefficients of the species shown in the balanced equation?The coefficients of the species shown in the balanced equation are as follows:
HNO3: 1Fe: 1H+: 3NO: 1Fe2+: 1H2O: 1
How many electrons are transferred in this reaction?
To learn more about : electrons
https://brainly.com/question/26084288
#SPJ11
do you expect keq to vary with increasing initial reactant concentration? group of answer choices yes, keq will increase with an increase in initial reactant concentrations yes, keq will decrease with an increase in initial reactant concentrations no, keq will not vary with initial reactant concentrations the answer depends on the reaaction
Equilibrium constant will not vary with initial concentration. The value of equilibrium constant depends on temperature and the enthalpy of the reaction. So the correct option from the following is option (c).
The equilibrium constant for a reversible chemical reaction is defined as the ratio of the concentrations when chemical equilibrium is reached and expresses the extent to which equilibrium of the reaction. It is the value of the reaction quotient of the chemical reaction at chemical equilibrium which signifies a state approached by a dynamic chemical system after the certain time has elapsed at which the composition of the reaction has no predictable tendency towards further change. The equilibrium concentrations of reactants and products of the chemical reaction depends on the initial concentrations but the value of Keq does not depends on it.
To learn more about Equilibrium constant
https://brainly.com/question/3159758
#SPJ4
The complete question is,
Do you expect Keq to vary with increasing initial reactant concentration?
Group of answer choices
A. Yes, Keq will increase with an increase in initial reactant concentrations
B. Yes, Keq will decrease with an increase in initial reactant concentrations
C. No, Keq will not vary with initial reactant concentrations
D. The answer depends on the reaction
what is the ph of a solution of 0.482 m ethylammonium chloride, c2h5nh3cl? the kb of ethylamine, c2h5nh2, is 4.3 x 10-4.
The pH of the solution of 0.482 m ethylammonium chloride is 1.96.
When dissolved in water, it dissociates into its ions,
C₂H₅NH₃Cl → C₂H₅NH₃⁺ + Cl⁻
The C₂H₅NH₃⁺ ion can react with water to form C₂H₅NH₂ and H₃O⁺ ions:
C₂H₅NH₃⁺ + H₂O ⇌ C₂H₅NH₂ + H₃O⁺
The equilibrium constant for this reaction is Kb, the base dissociation constant for ethylamine, which is given as 4.3 x 10^-4. We can use this value to calculate the concentration of hydroxide ions in the solution.
First, we need to calculate the initial concentration of ethylammonium ion, which is equal to the concentration of ethylammonium chloride because the salt dissociates completely in water:
[C₂H₅NH₃⁺] = 0.482 M
The initial concentration of hydroxide ions is negligible, so we can assume that it is zero. At equilibrium, the concentration of ethylammonium ion will decrease by x, and the concentrations of ethylamine and H₃O⁺ ions will both increase by x. Therefore, we can write the equilibrium concentrations as:
[C₂H₅NH₃⁺] = 0.482 - x
[C₂H₅NH₂] = x
[H₃O⁺] = x
Using the expression for Kb,
Kb = [C₂H₅NH₂][H₃O⁺]/[C₂H₅NH₃⁺]
Substituting in the equilibrium concentrations and the value of Kb,
4.3 x 10^-4 = x^2 / (0.482 - x)
Since x is much smaller than 0.482, we can assume that 0.482 - x ≈ 0.482. Solving for x,
x = sqrt(Kb[C₂H₅NH₃⁺]) = sqrt((4.3 x 10^-4)(0.482)) = 0.011
Therefore, the concentration of H₃O⁺ ions is [H₃O⁺] = 0.011 M. Using the expression for pH, we can calculate the pH of the solution,
pH = -log[H₃O⁺] = -log(0.011) = 1.96
To know more about ph, here
brainly.com/question/10697195
#SPJ4
What are the differences between Alkane and Alkyl radicals?
Answer:
Alkanes are hydrocarbons with only single bonds between carbon atoms, while alkyl radicals are highly reactive species that contain a single unpaired electron and are formed when an alkane loses a hydrogen atom. Alkyl radicals are therefore not stable on their own and tend to quickly react with other molecules, while alkanes are relatively stable and unreactive.
Explanation:
How are these words related?
dozen
gross
ream
decade
A)Units of time
B)Units of ordering
C) Involved counting things
Please answer ASAP
c. involved counting things.
A chemical reaction occurred when .500g of Calcium hydroxide falls into a 100ml of
8.5M hydroiodic acid.Is this enough calcium hydroxide to completely neutralize the all of the acid?
-How much salt forms in this reaction?
First, we need to determine the number of moles of hydroiodic acid in 100mL of 8.5M solution. Therefore, 1.98 g of calcium iodide forms in the reaction.
8.5 moles/L x 0.100 L = 0.85 moles of hydroiodic acid
Next, we need to determine the number of moles of calcium hydroxide used in the reaction.
0.500 g Ca(OH)2 x (1 mol Ca(OH)2/74.09 g) = 0.00674 moles Ca(OH)2
Since the stoichiometry of the reaction is 1:2 between Ca(OH)2 and HI, we need twice as many moles of hydroiodic acid to completely react with all the Ca(OH)2.
0.00674 moles Ca(OH)2 x 2 = 0.0135 moles HI needed
Since we have 0.85 moles of HI, which is more than enough to react with 0.0135 moles of Ca(OH)2, the reaction is complete.
To determine how much salt (calcium iodide) forms, we need to use the stoichiometry of the reaction, which is:
Ca(OH)2 + 2HI ⇒ CaI2 + 2H2O
Since two moles of hydroiodic acid react with one mole of calcium hydroxide to form one mole of calcium iodide, the amount of salt formed is:
0.00674 moles Ca(OH)2 x (1 mol CaI2/1 mol Ca(OH)2) = 0.00674 moles CaI2
Finally, we can calculate the mass of calcium iodide formed using its molar mass:
0.00674 moles CaI2 x 293.88 g/mol = 1.98 g CaI2
To know more about calcium iodide, visit:
https://brainly.com/question/29694775
#SPJ1
Question :-
How to balance chemical equations?
I need steps
Don't spam from Go0gle
!!!!CLASS 10 CHEMISTRY!!!!
Answer:
the main aim of balance in an equation is making show that the total number of substances on the reactant side is equal to the total number of substances on the product side
Explanation:
so if we were to balance the equation of water water is a compound containing two molecules of hydrogen and one molecule of oxygen therefore
H+O=H2O
[tex]H+O_2= H_2O[/tex]
Element | Reactant | Product
H | 1 × 4 | 2×2
O | 2 | 1 × 2
[tex]4H+O_2= 2H_2O[/tex]
calculate the solubility product constant, ksp for copper (i) chloride given that the solubility of this compound at 25c is 1.08 x 10^-2 g cucl in 100. g of water
The solubility product constant, ksp for copper (i) chloride given that the solubility of this compound at 25c is 1.08 x 10⁻²g cucl in 100. g of water is equals to the CuCl is 1.16 × 10⁻⁴.
The solubility product of a compound is calculated by the product of the powers of the concentration of ions of the corresponding compounds. When a compound is dissolved in any solvent, then one common ion should be present in the solvent and that compound. We have, Solubility of compound in CuCl
= 1.08 × 10⁻² g
temperature, t = 25°C
quantity of water = 100g
Solubility product constant formula, Ksp = [products]/[reactants]
The ksp for copper (i) chloride in CuCl
= s² = ( 1.08 × 10⁻² )²
= 1.16 × 10⁻⁴
Hence, required constant value is 1.16 × 10⁻⁴.
For more information about solubility product constant, visit :
https://brainly.com/question/9807304
#SPJ4
the solubility product of ag2cro4 is 9.0 x 10^-12. explain the difference between the equilibrium postion attained when silver chromate is added to pure water and when it is added to 0.100 m agno3
The equilibrium position attained when Ag2CrO4 is added to a solution of 0.100 M AgNO3 will be shifted towards the dissolution of the solid compound.
How can we determine equilibrium position?
The solubility product constant (Ksp) of Ag2CrO4 is a measure of the tendency of the solid compound to dissolve into its constituent ions.
It can be expressed as the product of the concentrations of the ions involved in the equilibrium of the dissolution of the solid compound.
When Ag2CrO4 is added to pure water, it will dissolve slightly to form some Ag+ and CrO42- ions, and the system will reach an equilibrium state.
The equilibrium position will be such that the product of the concentrations of these ions is equal to the Ksp of the compound.
At this point, the rate of dissolution of the solid compound will be equal to the rate of precipitation of the solid compound.
On the other hand, when Ag2CrO4 is added to a solution of 0.100 M AgNO3, the concentration of Ag+ ions in the solution is much higher than in pure water.
This will shift the equilibrium position towards the side of the reaction that consumes the excess Ag+ ions.
In other words, more Ag2CrO4 will dissolve to form Ag+ and CrO42- ions, in order to consume the excess Ag+ ions in solution.
This will result in a lower concentration of Ag2CrO4 in the solution compared to when it is added to pure water.
Therefore, the equilibrium position attained when Ag2CrO4 is added to a solution of 0.100 M AgNO3 will be shifted towards the dissolution of the solid compound.
Learn more about equilibrium position
brainly.com/question/29409724
#SPJ11
Please help!!!! Classify the following substances as electrolytes or non electrolytes:
Pure water, tap water, sugar solution, sodium chloride solution, hydrochloric acid solution, lactic acid solution, ethyl alcohol solution, pure sodium chloride
Answer:
Pure water: electrolyte (poor)
Tap water: electrolyte (small amount)
Sugar solution: nonelectrolyte
Sodium chloride solution: electrolyte
Hydrochloric acid solution: electrolyte
Lactic acid solution: electrolyte.
Ethyl alcohol solution: nonelectrolyte
Pure sodium chloride: strong electrolyte
Explanation:
Electrolytes are part of a solution that conduct electricity, while nonelectrolytes do not conduct electricity in a solution.
how many times greater is the rate of effusion of molecular fluorine than that of molecular bromine at the same temperature and pressure? group of answer choices 3.062 2.051 4.450 7.280
The rate of effusion of molecular fluorine is 2.05 times than that of molecular bromine at the same temperature and pressure.
The rate of effusion of gas can be calculated by using Graham's Law.
According to this law, the rate of effusion of gas is inversely proportional to the square root of the molar mass of the gas.
The mathematical expression is represented as:
Rate of effusion ∝ [tex]\frac{1}{\sqrt{molar mass of the gas} }[/tex]
We know that,
Molar mass of bromine = 160 g/mol
Molar mass of fluorine =38 g/mol
For the rate of effusion of bromine to fluorine, the expression is given as:
[tex]\frac{rate of Fluorine gas}{rate of bromine gas} =\sqrt{\frac{molar mass of bromine gas}{molar mass of fluorine gas} }[/tex]
[tex]\frac{rate of Fluorine gas}{rate of bromine gas} =\sqrt{\frac{160}{38} }[/tex]= 2.05
Thus, the rate of effusion of fluorine is 2.05 times than that of bromine.
To know more about effusion here
https://brainly.com/question/9173434
#SPJ4
a container with volume 71.9 ml contains water vapor at a pressure of 10.4 atm and a temperature of 465oc. how many grams of the gas are in the container?
The mass of the gas is 4.777 gram in the container with volume 71.9 ml contains water vapor at a pressure of 10.4 atm. and a temperature of 465 degree centigrade. This is calculated using ideal gas equation.
Volume of the water vapor = 71.9 ml = 0.0719L
Pressure of the water vapor = 10.4 atm.
Temperature of the water vapor = 465 degree C = 738 K
We can calculate the number of moles of water vapor by using the ideal gas equation.
PV = n RT
10.4 atm. * 0.0719L = n * 8.314 J/ mole· K * 10.4 atm.
n = 10.4 atm. * 0.0719L / 8.314 J/ mole· K * 10.4 atm.
= 0.0086 mole
We know that the number of moles is equals to,
Number of moles = mass / molar mass
= 0.0086 mole / 18 g/mole
= 4.777 g
To learn more about ideal gas equation
https://brainly.com/question/27870704
#SPJ4
1. how do you explain the relatively high conductivity of tap water compared to a low or zero conductivity for deionized water? 2. is gatorade a strong or weak electrolyte?
The relatively high conductivity of tap water compared to deionized water is due to the presence of dissolved ions in tap water. The high conductivity of Gatorade is also why it can be used in experiments involving electricity and conductivity.
Tap water contains various dissolved minerals and salts, such as calcium, magnesium, sodium, and chloride ions. These ions carry an electric charge and can conduct electricity, which leads to the relatively high conductivity of tap water. In contrast, deionized water has had all of its ions removed, resulting in a very low conductivity or zero conductivity.
Gatorade is a strong electrolyte. It contains a high concentration of dissolved ions, such as sodium, potassium, chloride, and phosphate ions. These ions dissociate into positive and negative ions in water, which can conduct electricity.
This is why Gatorade is sometimes used to rehydrate athletes during and after intense physical activity, as the electrolytes can help replace those lost through sweat and aid in the body's normal function.
To learn more about conductivity
https://brainly.com/question/7643131
#SPJ4
What does it do in reaching the transition state (which marks the activation energy necessary to promote the reaction?
The transition state in a chemical process is where the energy level is at its highest. The activation energy is the name given to this force. When two or more molecules are combined, collisions will occur.
They will react and produce new molecules if they strike with sufficient energy to pass through the transition state. The kinetics of a reaction are determined by the activation energy, the greater the energy hill, the slower the process. Energy is needed to form bonds, and energy is released when bonds are broken. In one reaction energy profile, the transition state is at its greatest point. Energy increases before the transition stage, which suggests the transition state absorbs energy.
Learn more about transition transition state here:
https://brainly.com/question/28266605
#SPJ4
Many movies show people tapping SOS on water pipes to get help. Why is tapping on water pipes a quicker way of passing on a message than yelling?
(Use science terminology)
Tapping on water pipes is a quicker way of passing on a message than yelling because of the difference in the speed of sound in water compared to air.
What is sound?
Sound travels faster in water than in air, with a speed of approximately 1,500 meters per second in water and 340 meters per second in air. When someone taps on a water pipe, the vibrations travel through the water faster than if they were to yell or shout. These vibrations can be detected by someone listening with their ear or using specialized equipment, allowing for the SOS message to be transmitted over a greater distance and more quickly than if the message were shouted. This phenomenon is due to the fact that water molecules are more tightly packed than air molecules, allowing sound waves to travel more efficiently through water.
To know more about sound, visit:
https://brainly.com/question/15381147
#SPJ1
Complete question is: Many movies show people tapping SOS on water pipes to get help. Tapping on water pipes is a quicker way of passing on a message than yelling because of the difference in the speed of sound in water compared to air.
it required 10.00 ml of 0.250 m naoh to titrate 50.00 ml of h 2 so 4 (to the equivalence point). what was the original concentration of the h 2 so 4 ?
The equivalent point of the HBr calculated by using the process of titration is 28 ml.
The term Titration is defined as the process which involves the slow addition of one solution of a known concentration which is called as a titrant added to a known volume of another solution of unknown concentration until the reaction reaches to the neutralization point. It is indicated by a color change. This common laboratory method of quantitative chemical analysis which is used to determine the concentration of an identified analyte of the solution. Titrant or titrator is the reagent which is prepared as a standard solution of known concentration and volume of the solution.
Molarity of the acid is 0.140 M
Volume of acid is 40 mL
Molarity of base is 0.200 M
We have the expression for the Molarity,
M1 V1 = M2 V2
V2 = M1 V1/ M2
by putting all the values in the expression we get,
V2 = 28 ml
To learn more about Titration
https://brainly.com/question/13307013
#SPJ4
The correct question is,
What volume (in mL ) of 0.200M sodium hydroxide do we need to titrate 40.00 mL of 0.140 M HBr to the equivalence point?
how many milliliters of cobalt(ii) chloride hexahydrate solution were added to the flask (before dilution)? note: the volume of substances dispensed in the lab may vary. choose the answer that is closest to yours.
The volume of CoCl ₂ needed before dilution is 10.0 mL. Hence, the right answer is 10.0 mL.
As per the given problem; Calculate the volume of 0.100 M CoCl ₂ needed to prepare 100.0 mL of 0.0100 M CoCl ₂ solution.
The molarity of the diluted solution (after adding water) is M2 = 0.0100 M,
the volume of the diluted solution is V2 = 100.0 mL,
and the molarity of the stock solution is M1 = 0.100 M.
The volume of the stock solution needed is given by the equation below:
M1V1 = M2V2⇒V1= M2V2/M1⇒V1
= 0.0100 M x 100.0 mL/0.100 M⇒V1
= 10.0 mL
Therefore, we need 10.0 mL of 0.100 M CoCl ₂ solution to prepare 100.0 mL of 0.0100 M CoCl ₂ solution before dilution. So, the volume of CoCl ₂ needed before dilution is 10.0 mL.
Hence, the right answer is 10.0 mL.
For more such questions on volume
brainly.com/question/13799525
#SPJ11
a 10.0 ml of 0.121 m h2so4 is neutralized by 17.1 ml of koh solution. the molarity of the koh solution is . group of answer choices 0.428 m 0.207 m 0.0708 m 0.142 m 0.414 m
A 10.0 ml of 0.121 m [tex]H_2SO_4[/tex] is neutralized by 17.1 ml of [tex]KOH[/tex] solution. The molarity of the [tex]KOH[/tex] solution is: 0.142 M.
The correct answer choice is " 0.142 m "
Balanced equation for the reaction is:
[tex]H_2SO_4[/tex] + 2[tex]KOH[/tex] → [tex]K_2SO_4[/tex]+ 2[tex]H_2O[/tex]
From the balanced equation, we can see that one mole of [tex]H_2SO_4[/tex] reacts with two moles of [tex]KOH[/tex].
Therefore, the number of moles of [tex]KOH[/tex] required to neutralize 10.0 ml of 0.121 M [tex]H_2SO_4[/tex] is:
0.121 moles/L × 10.0 mL × 1 L/1000 mL = 0.00121 moles
Since two moles of [tex]KOH[/tex] are required to react with one mole of [tex]H_2SO_4[/tex] , the number of moles of [tex]KOH[/tex] required is:
0.00121 moles [tex]H_2SO_4[/tex] × 2 moles [tex]KOH[/tex]/1 mole [tex]H_2SO_4[/tex] = 0.00242 moles [tex]KOH[/tex]
The volume of the [tex]KOH[/tex] solution required to supply 0.00242 moles [tex]KOH[/tex] is 17.1 mL.
Therefore, the molarity of the [tex]KOH[/tex] solution is:
0.00242 moles/17.1 mL × 1000 mL/1 L
= 0.142 M
Therefore, the correct answer choice is " 0.142 m "
For more such questions on molarity, click on:
https://brainly.com/question/14469428
#SPJ11