A glass slides across a bar and slows down due to a kinetic friction of 0.175n. if the glass weighs 0.500n, what is the coefficient of kinetic friction between the glass and the bar?

Answer:

An infrared camera – also called IR camera, thermal means heat it can track your heat camera or thermal camera – is a measuring  by instrument it means its a measuring tool

used for non-contact measurements of the surface temperature of objects.

Explanation:

kids are oof

By using,  the system of equations, the candy distributor must use: 20 kilograms of the 20% fat-content chocolate and 80 kilograms of the 60% fat-content chocolate to create 100 kilograms of a 52% fat-content chocolate.

To create 100 kilograms of a 52% fat-content chocolate, the distributor needs to mix a 20% fat-content chocolate with a 60% fat-content chocolate. Let's use the variables x and y to represent the amounts of the 20% and 60% chocolates, respectively.

The sum of the two chocolates must equal 100 kilograms:
x + y = 100

The fat-content percentage must equal 52%:
0.20x + 0.60y = 0.52 * 100

Now, we'll solve the system of equations. From the first equation, we can express y as:
y = 100 - x

Substitute this expression for y in the second equation:
0.20x + 0.60(100 - x) = 52

Expand and simplify:
0.20x + 60 - 0.60x = 52

Combine like terms:
-0.40x = -8

Divide by -0.40 to find x:
x = 20

Now that we have x, we can find y:
y = 100 - 20 = 80

So, the candy distributor must use 20 kilograms of the 20% fat-content chocolate and 80 kilograms of the 60% fat-content chocolate to create 100 kilograms of a 52% fat-content chocolate.

To know more about system of equations, refer here:

https://brainly.com/question/30127282#

#SPJ11

The caloris basin on mercury covers a large region of the planet, but few craters have formed on top of it. from this we conclude that iii) the caloris basin formed toward the end of the solar system's period of heavy bombardment.

From the observation that the Caloris Basin on Mercury covers a large region of the planet, but few craters have formed on top of it, we can conclude that the Caloris Basin likely formed toward the end of the solar system's period of heavy bombardment (option iii). This is because the basin has not accumulated a significant number of craters on top of it, suggesting that it was created after most of the intense impacts had occurred.

The other options are less likely: option i, that the Caloris Basin was formed by a volcano, is not as plausible since the basin is generally thought to have been formed by a massive impact event. Option ii, that erosion destroyed smaller craters on the basin, is unlikely as Mercury lacks the significant atmosphere and geological processes necessary for substantial erosion to occur. Finally, option iv, that Mercury's atmosphere prevented smaller objects from hitting the surface, is incorrect because Mercury's extremely thin atmosphere is not capable of shielding the surface from impacts. The correct option is iii) the caloris basin formed toward the end of the solar system's period of heavy bombardment.

For more about solar system's:

https://brainly.com/question/12075871

#SPJ11

Because capacitors have the ability to filter signals, they are frequently employed in a variety of audio devices like loudspeakers, microphones, woofers, tweeters, and other similar devices.

Energy storage, power conditioning, electronic noise filtering, distant sensing, and signal coupling and decoupling are some of the most typical uses for capacitors. Capacitors are employed in a variety of industries because they serve an essential and adaptable function in a wide range of applications.

Today's smartphone antenna systems depend heavily on capacitors. They are mostly employed for impedance matching, frequency tuning, and filtering.

To know more about capacitors visit:-

brainly.com/question/17176550

#SPJ1

According to the law of conservation of momentum, the total momentum of a system remains constant if no external forces act on it. In this scenario, the boat and the person are initially at rest, so their total momentum is zero.

When the person on the dock tosses the watermelon to you, the watermelon will have an initial momentum in the direction of the throw. Since there are no external forces acting on the system, the total momentum of the system must still be zero after the toss.

To maintain the total momentum at zero, you and the boat must acquire an equal but opposite momentum to balance out the momentum of the watermelon. As a result, the boat will move backward in response to the forward momentum acquired by you when you catch the watermelon.

This outcome demonstrates the law of conservation of momentum in action, where the total momentum of the system (you, the boat, and the watermelon) remains constant before and after the toss.

To know more about momentum refer here

https://brainly.com/question/30677308#

#SPJ11

The difference between the head and point of a nail when pushed against your skin with the same force is due to the difference in pressure. Pressure is calculated as force divided by area (P = F/A).

The point of the nail has a smaller area, which results in higher pressure, allowing it to pierce your skin. On the other hand, the head of the nail has a larger area, resulting in lower pressure, and therefore does not pierce your skin.

Pressure is defined as the force applied per unit area. It can be calculated using the equation P = F/A, where P represents pressure, F represents the force applied, and A represents the area over which the force is distributed.

When a nail is pushed against your skin with the same force, the pressure exerted by the nail depends on the area of contact between the nail and your skin.

The point of the nail has a smaller area compared to the head. Since the force applied remains the same, the pressure exerted by the nail point is higher because the force is distributed over a smaller area. This higher pressure allows the point of the nail to pierce through your skin.

On the other hand, the head of the nail has a larger area of contact. When the same force is applied, the pressure exerted by the nail head is lower because the force is distributed over a larger area. This lower pressure is why the head of the nail does not pierce your skin.

To learn more about pressure, refer below:

https://brainly.com/question/12971272

#SPJ11

The acceleration of the 34 kg child on a bike when being pushed with a force of 57 N would be approximately: 1.68 meters per second squared.

To calculate the acceleration of a 34 kg child on a bike when being pushed with a force of 57 N, you can use Newton's second law of motion. Newton's second law states that the force applied on an object is equal to the mass of the object multiplied by its acceleration (F = ma).

In this case, the applied force (Fa) is 57 N, and the mass (m) of the child is 34 kg. To find the acceleration (a), you can rearrange the formula as follows:

a = Fa/m

Now, plug in the given values:

a = 57 N / 34 kg

a ≈ 1.68 m/s²

To know more about acceleration, refer here:

https://brainly.com/question/29766852#

#SPJ11

The true statement is "The PGF acting on the wind was stronger yesterday than today because the pressure gradient was larger yesterday". Option 1 is correct.

The pressure gradient force (PGF) is the force that drives air from high-pressure areas to low-pressure areas. It is proportional to the pressure gradient, which is the change in pressure over a given distance.

Yesterday, the pressure changed by 5 mb over a distance of 75 km, so the pressure gradient was 5 mb/75 km = 0.067 mb/km. Today, the pressure changed by 5 ml over a distance of 105 km, so the pressure gradient was 5 ml/105 km = 0.048 ml/km.

Since the pressure gradient was larger yesterday, the PGF acting on the wind was stronger yesterday than today. This means that the wind would have been driven more forcefully yesterday than today, assuming all other factors remained constant.

To learn more about pressure gradient, here

https://brainly.com/question/30463106

#SPJ4

The complete question is:

Yesterday, the pressure surrounding your location changed by 5 mb over a horizontal distance of 75 km. today, it changes by 5 ml over a horizontal distance of 105 km. choose the true statement.

The increase in the length of the rail on a hot day is 0.007392 m.

To solve this problem, we can use the formula for linear expansion:

ΔL = αLΔT

Where:

ΔL = change in length

α = linear expansion coefficient

L = original length

ΔT = change in temperature

We are given:

L = 21 m

ΔT = 32°C - 0°C = 32°C

α = 11×10^(-6) (°C)^(-1)

Substituting the values into the formula, we get:

ΔL = (11×10^(-6) (°C)^(-1)) × (21 m) × (32°C)

ΔL = 7.392 m × 10^(-3)

ΔL = 0.007392 m

Therefore, the increase in the length of the rail on a hot day is 0.007392 m.

Learn more about length below.

https://brainly.com/question/28322552

#SPJ1

The acceleration of the box can be determined using Newton's second law of motion, where the net force acting on the box is equal to the mass of the box multiplied by its acceleration.

In this case, the net force acting on the box is equal to the force of the rope (250 n at an angle of 32.0° above the horizontal) minus the force of kinetic friction (0.350 × 50 kg × 9.81 m/s2). After solving for the acceleration, the acceleration of the box is 5.3 m/s2.

To summarise, the acceleration of a box being pulled along a horizontal surface with a force of 250 n at an angle of 32.0° above the horizontal and a coefficient of kinetic friction of 0.350 is 5.3 m/s2. This acceleration can be determined by using Newton's second law of motion and calculating the net force acting on the box.

Know more about  Newton's second law of motion here

https://brainly.com/question/13447525#

#SPJ11

Meteorologists' weather predictions can sometimes be wrong..

Due to the complexity and variability of weather systems. Weather is influenced by many factors, such as temperature, pressure, humidity, and , which interact in complicated ways. Additionally, small changes in initial conditions or slight variations in the way weather patterns evolve can have significant effects on the final outcome.

While weather models and forecasting techniques have improved over time, there are still limitations and uncertainties in the data and models used to make predictions. Finally, unexpected events or phenomena, such as rapid changes in weather patterns or extreme weather events, can also make predictions difficult or inaccurate.

To know more about temperature refer here

https://brainly.com/question/15267055#

#SPJ11

The unbalanced net force acting on the rope is 200 N to the left. This means that the rope will move in the direction of the net force, which is to the left.

The unbalanced net force is the overall force acting on the object after considering all the forces acting on it.

In this case, one person is pulling on a rope with a force of 400 N to the right and the other person is pulling on the opposite end with a force of 600 N to the left.

To determine the net force, we need to subtract the force acting in the opposite direction from the force acting in the forward direction.

Since the forces are in opposite directions, we need to subtract the smaller force from the larger force:

Net force = 600 N - 400 N = 200 N to the left

To know more about net force refer here

https://brainly.com/question/29261584#

#SPJ11

A water droplet's radius will increase linearly with time if it acquires mass at a rate proportional to its cross-sectional area while passing through a cloud. This will cause its speed to also increase linearly with time within the cloud if its initial radius is very small.

a. As the water droplet falls through the cloud, it acquires mass at a rate proportional to its cross-sectional area. Since the droplet is initially spherical, its cross-sectional area is proportional to its radius squared, i.e., [tex]a \propto r^{2}[/tex]

Therefore, the rate of increase in mass of the droplet is proportional to k times r². By Newton's second law, the acceleration of the droplet is proportional to the net force acting on it, which is equal to the gravitational force minus the buoyant force.

Since there is no resistive force acting on the droplet, the buoyant force is proportional to the volume of the droplet, which is proportional to r³. Thus, the acceleration of the droplet is proportional to [tex](k \times r^2) - (constant \times r^3)[/tex]. Therefore, the radius of the droplet will increase linearly with time as it falls through the cloud.

b. If the initial radius of the droplet, r0, is negligibly small, then its initial mass and velocity will also be small. As it falls through the cloud, it will acquire mass at a rate proportional to its cross-sectional area, which is proportional to r². Therefore, the rate of increase in mass will be proportional to r².

The acceleration of the droplet will be proportional to the net force acting on it, which is equal to the gravitational force minus the buoyant force. Since the initial velocity of the droplet is small, the buoyant force will also be small, and can be neglected. Thus, the acceleration of the droplet will be proportional to r².

By Newton's second law, the velocity of the droplet will increase linearly with time, since the acceleration is proportional to r², which is proportional to the rate of increase in mass of the droplet.

In summary, if a water droplet falling in the atmosphere acquires mass at a rate proportional to its cross-sectional area as it passes through a cloud, then its radius will increase linearly with time, and if its initial radius is negligibly small, then its speed will increase linearly with time within the cloud.

To know more about mass refer here:

https://brainly.com/question/18064917#

#SPJ11

Five potential hazards that could encounter on a residential street are, Children playing on the street or sidewalks without adult supervision. Vehicles parked haphazardly on the side of the street, obstructing visibility. Pets roaming freely or off-least .Pedestrians crossing the street unexpectedly or without looking both way. Bicyclists or skateboarders weaving in and out of traffic

If I were driving at the time, I would take several actions to reduce the risk of potential hazards. Firstly, I would slow down and remain alert to any signs of movement or activity on the street, particularly in areas where children or pets may be present. Secondly, I would maintain a safe distance from other vehicles and obstacles, such as parked cars, to ensure that I have adequate time to stop or maneuver if necessary. Thirdly, I would signal my intentions clearly and use my horn sparingly to alert other drivers or pedestrians to my presence. To avoid hazards, I would take the following actions:

To know more about hazards

https://brainly.com/question/15507737

#SPJ4

Answer:

time: seconds

length: meter

mass: kilogram

electric current: ampere

temperature: Kelvin

Explanation:

If body A is twice as dense as body B for equal volumes of A and B, then it means that body A has twice the amount of mass per unit volume compared to body B. In other words, for a given volume, body A has twice the amount of matter in it compared to body B.

To measure the mass of the two bodies, we can use a balance scale. A balance scale works on the principle of the law of mass conservation, which states that the total mass of a closed system remains constant, regardless of any physical or chemical changes that may occur within that system.

Here's how we can measure the mass of the two bodies using a balance scale:

1. We start by placing body A on one side of the balance scale and body B on the other side.

2. We add weights to the side with body B until the balance scale is in equilibrium, meaning that both sides have the same weight.

3. Since body A is denser than body B, it will have more mass than body B for the same volume. Therefore, the weight needed to balance body A will be greater than the weight needed to balance body B.

4. We can then use the weights needed to balance the two bodies to calculate their masses. Since the balance scale is in equilibrium, the masses of the two bodies are equal to the weights needed to balance them.

Therefore, by using a balance scale, we can measure the mass of body A and body B, even if body A is twice as dense as body B for equal volumes of A and B. This is because the balance scale works on the principle of mass conservation, which allows us to determine the mass of the two bodies based on the weights needed to balance them.

To learn more about Weight click:

https://brainly.com/question/31247796

#SPJ1

The electric power of the lamp is 240 watts.

The electric power of a lamp can be calculated using the formula:

Power = Current x Voltage

In this case, the current is 2 A and the voltage is 120 V.

Power = 2 A x 120 V = 240 watts (W)

To know more about electric power refer here

https://brainly.com/question/27442707#

#SPJ11

An astronaut on the surface of a large spherical asteroid fires a 5. 0 kg cannonball horizontally from a cannon, acceleration due to gravity at its surface equal to one twelfth of the value on Earth: the speed of the cannonball as it leaves the cannon, v ≈ 1410 m/s

Part A: To calculate the speed of the cannonball (v) for it to travel completely around the asteroid and return to its original location, we can use the formula for orbital velocity: v = sqrt(GM/R), where G is the gravitational constant, M is the mass of the asteroid, and R is the radius.

The asteroid's diameter is 210 km, so its radius is 105 km (or 105,000 meters). Since the acceleration due to gravity on the asteroid is 1/12th of Earth's, we can write GM/R = (1/12) * g, where g is Earth's acceleration due to gravity (9.81 m/s²). Solving for v, we get v ≈ 1410 m/s (to 3 significant figures).

Part B: To calculate the time it takes for the cannonball to travel around the asteroid, we can use the formula for orbital period: T = 2πR/v. Plugging in the values from Part A (R = 105,000 m, v = 1410 m/s), we get T ≈ 4700 seconds (to 3 significant figures).

To know more about acceleration due to gravity, refer here:

https://brainly.com/question/88039#

#SPJ11

Complete question:

An astronaut on the surface of a large spherical asteroid fires a 5. 0 kg cannonball horizontally from a cannon. The asteroid has a diameter of 210 km , and has an acceleration due to gravity at its surface equal to one twelfth of the value on Earth

Part A

What must be the speed of the cannonball as it leaves the cannon, v, so that it travels completely around the asteroid and returns to its original location?

Give your answer in metres per second, to 3 significant figures.

Part B

How long does it take the cannonball to travel around the asteroid?

Give your answer in seconds, to 3 significant figures.

The pressure in the cylinder of amotor cycle engine is 600000Pa. This acts on apiston with an area of o. Oo3m2. The force on the piston in newtons is 1800N

To find the force on the piston in newtons, we need to use the formula F = PA, where F is the force, P is the pressure, and A is the area.

Given that the pressure in the cylinder of the motor cycle engine is 600000Pa and the piston has an area of 0.003m2, we can plug these values into the formula:

F = 600000Pa x 0.003m2
F = 1800N

. This means that the pressure in the cylinder is able to exert a force of 1800N on the piston, which in turn helps to move the engine and generate power for the motor cycle.

It is important to note that the pressure and force involved in the functioning of a motor cycle engine are critical to its performance and efficiency. Proper maintenance and tuning of the engine are essential to ensure that the pressure and force are optimized for maximum power and durability.

To learn more about : force

https://brainly.com/question/12785175

#SPJ11

If the index of refraction of a material is 2, it means that light travels half as fast in air as it does in the material. The index of refraction is a measure of how much a material slows down light as it passes through it.

A higher index of refraction indicates that light is slowed down more, while a lower index of refraction implies that light passes through the material more easily.

In the case of a material with an index of refraction of 2, light moves at half its speed in air when it traverses the material. For instance, if light travels at a speed of 300,000 km/s in a vacuum or air, it would only travel at a speed of 150,000 km/s when passing through a material with an index of refraction of 2.

It is crucial to recognize that the speed of light remains constant, but its velocity and direction change when it encounters materials with different indices of refraction. Understanding the behavior of light in various materials is fundamental in fields such as optics, physics, and engineering.

Know more about index of refraction click here:

https://brainly.com/question/30761100

#SPJ11

Answer:

The spring constant is 3.0 kg

The acceleration of the two blocks is approximately [tex]0.67 m/s^2.[/tex]

Since the two blocks are in contact and moving together, they are considered as a single system.

The net force on the system is the force applied to the 1.0 kg block minus the force of friction between the two blocks. According to Newton's second law, the net force is equal to the mass of the system times its acceleration:

Net force = (mass of system) x (acceleration)

We can set up an equation for the net force as follows:

Net force = F - f

where F is the applied force, and f is the force of friction between the two blocks. Since the table is assumed to be frictionless, there is no frictional force, so f = 0.

Therefore, the net force is simply equal to the applied force F:

Net force = F

We can now substitute the values given in the problem:

F = 2.0 N (the force applied to the 1.0 kg block)

m = 1.0 kg + 2.0 kg = 3.0 kg (the total mass of the system)

Using the equation for the net force, we can find the acceleration of the system:

Net force = (mass of system) x (acceleration)

F = m x a

a = F / m

a = 2.0 N / 3.0 kg

[tex]a =0.67 m/s^2[/tex]

To know more about acceleration refer here

https://brainly.com/question/12550364#

#SPJ11

When oceanic plates collide in a subduction zone, one plate is forced beneath the other, which results in the formation of a variety of landforms.

One of the most common landforms that can occur in a subduction zone is a volcanic arc. This is formed when magma rises from the subducting plate and forms a chain of volcanic islands or mountains on the overriding plate.

Examples of volcanic arcs include the Andes in South America and the Cascade Range in the western United States.

Another type of landform that can occur in a subduction zone is a deep ocean trench. This is formed when the subducting plate plunges deep beneath the overriding plate and creates a narrow, steep-sided depression in the ocean floor.

Examples of deep ocean trenches include the Mariana Trench in the Pacific Ocean and the Peru-Chile Trench in the southeastern Pacific Ocean.

In addition to volcanic arcs and deep ocean trenches, subduction zones can also create uplifted regions known as accretionary wedges.

These are formed when sediments and other materials accumulate on the overriding plate as a result of the subduction process. Over time, these materials become compacted and uplifted to form a thick, wedge-shaped mass of rock.

Overall, the specific type of landform that forms in a subduction zone where oceanic plates collide will depend on a variety of factors, including the angle of the subduction zone, the composition of the plates involved, and the amount of time that has passed since the collision began.

To know more about subduction zone refer here

https://brainly.com/question/13788626#

#SPJ11

The angular velocity of the moon is approximately [tex]2.7 \times 10^{-6[/tex] rad/s, which is the answer (d).

To calculate the angular velocity of the moon, we first need to understand what angular velocity is. Angular velocity is defined as the rate of change of angular displacement with respect to time. In simpler terms, it is the speed at which an object is rotating or moving in a circular path.

In this case, the moon is moving in a circular path around the Earth, so we can use the formula for angular velocity:

ω = θ / t

where ω is the angular velocity, θ is the angular displacement, and t is the time taken for one complete revolution.

We know that the time taken for one complete revolution of the moon around the Earth is 27.3 days. To convert this into seconds, we multiply by 24 hours in a day, 60 minutes in an hour, and 60 seconds in a minute:

t = 27.3 x 24 x 60 x 60 = 2,360,320 seconds

Now we need to find the angular displacement of the moon in one complete revolution. Since the moon moves in a circular path, its angular displacement is equal to the angle subtended by its path at the center of the earth. This angle is equal to 2π radians since the circumference of a circle is 2π times its radius (in this case, the distance from the moon to the center of the earth).

θ = 2π radians

Now we can substitute these values into the formula for angular velocity:

[tex]\omega = \frac{\theta}{t} = \frac{2\pi}{2{,}360{,}320} \approx 2.7\times 10^{-6}\ \mathrm{rad/s}[/tex]

To learn more about angular velocity

https://brainly.com/question/30885221

#SPJ4

Considering an egg has a mass of 0.15 kg being at the top of a flight of stairs, the answers to the following questions are:

3. To find the height of the stairs, we'll use the potential energy formula: PE = mgh, where PE is potential energy (11 J), m is mass (0.15 kg), g is acceleration due to gravity (9.81 m/s^2), and h is the height we want to find.

Rearranging the formula for h: h = PE / (mg) => h = 11 J / (0.15 kg × 9.81 m/s^2) => h ≈ 7.47 m. So, the height of the stairs is approximately 7.47 meters.

4. When the egg is dropped and reaches the ground, all of its potential energy is converted into kinetic energy. Therefore, the kinetic energy right before the egg hits the ground is equal to its initial potential energy, which is 11 J.

5. To find the velocity right before the egg hits the ground, we'll use the kinetic energy formula: KE = 0.5mv^2, where KE is kinetic energy (11 J), m is mass (0.15 kg), and v is the velocity we want to find.

Rearranging the formula for v: v = sqrt(2 × KE / m) => v = sqrt(2 × 11 J / 0.15 kg) => v ≈ 12.12 m/s. So, the velocity of the egg right before it hits the ground is approximately 12.12 m/s.

To learn more about velocity, refer below:

https://brainly.com/question/17127206

#SPJ11

When light enters a material of higher index of refraction, its speed decreases. Option D is correct.

This phenomenon is known as refraction and is a result of the change in the speed of light as it passes through a material with a different refractive index. The refractive index is a measure of how much a material can bend light, compared to the speed of light in a vacuum. When light passes from a medium with a lower refractive index, such as air or vacuum, to a medium with a higher refractive index, such as water or glass, it slows down and bends towards the normal line, an imaginary line perpendicular to the surface of the material.

The amount of refraction that occurs depends on the angle of incidence, or the angle at which the light strikes the surface, as well as the difference in refractive indices between the two materials. The change in speed and direction of the light as it passes through a material of higher refractive index can be described by Snell's law. Option D is correct.

To know more about the Refraction, here

https://brainly.com/question/23750645

#SPJ4

The increase in the translational kinetic energy of the yo-yo is 0.0423 J.

To find the increase in the translational kinetic energy of the yo-yo, we need to calculate the work done on the yo-yo by the force applied by the hand.

The work done is given by: W = Fdcos(theta), where F is the force applied, d is the distance moved, and theta is the angle between the force and the displacement.

In this case, theta is 180 degrees since the force and displacement are in opposite directions.

Substituting the given values, we get:

W = (0.235 N)*(0.18 m)*cos(180 deg)

W = -0.0423 J

Since the yo-yo initially had kinetic energy due to its downward motion, the work done by the hand increases the yo-yo's total kinetic energy. The increase in kinetic energy is given by: ΔK = -W

Substituting the value of W, we get: ΔK = 0.0423 J

Therefore, the increase in the translational kinetic energy of the yo-yo is 0.0423 J.

To know more about translational kinetic energy , refer here:

https://brainly.com/question/30107920#

#SPJ11