a gaseous mixture contains 1.50 mol of o2, 2.50 mol of he and 0.500 mol of n2. the partial pressue of the oxygen is 0.300atm. what are the partial pressures of the nitrogen and the helium

The concentration of urea in weight-percent 6.50%, in mole fraction is 0.0206 and in the concentration of urea in the solution in molarity is 1.12 M.

a) To express the concentration of urea in weight-percent:

First, we need to calculate the total mass of the solution:

Total mass = mass of solute + mass of solvent = 66.0 g + 950 g = 1016.0 g

Then, we can calculate the weight-percent concentration of urea:

Weight-percent = (mass of solute/total mass) x 100%

Weight-percent = (66.0 g/1016.0 g) x 100%

Weight-percent = 6.50%

Therefore, the concentration of urea in the solution in weight-percent is 6.50%.

b) To express the concentration of urea in mole fraction:

First, we need to calculate the number of moles of urea:

Number of moles = mass of solute/molar mass of urea

Molar mass of urea = 2(14.01 g/mol) + 1(12.01 g/mol) + 1(16.00 g/mol) = 60.06 g/mol

Number of moles = 66.0 g/60.06 g/mol = 1.099 mol

Then, we can calculate the mole fraction of urea:

Mole fraction = moles of solute/(moles of solute + moles of solvent)

Moles of solvent = mass of solvent/molar mass of water = 950 g/18.02 g/mol = 52.71 mol

Mole fraction = 1.099/(1.099 + 52.71) = 0.0206

Therefore, the concentration of urea in the solution in mole fraction is 0.0206.

c) To express the concentration of urea in molarity:

Molarity = moles of solute/volume of solution in liters

Volume of solution = mass of solute + mass of solvent/density of solution = (66.0 g + 950 g)/1.018 g/mL = 978.4 mL = 0.9784 L

Molarity = 1.099 mol/0.9784 L = 1.12 M

Therefore, the concentration of urea in the solution in molarity is 1.12 M.

Exercise:

To compare the concentrations of 0.50 M NaCl and 0.25 M SrCl2 in µg/mL, we need to calculate the number of micrograms of each salt per milliliter of solution:

For 0.50 M NaCl:

Molar mass of NaCl = 22.99 g/mol + 35.45 g/mol = 58.44 g/mol

Concentration in µg/mL = 0.50 mol/L x 58.44 g/mol x 1000 µg/mg = 29,220 µg/mL

For 0.25 M SrCl2:

Molar mass of SrCl2 = 87.62 g/mol + 2(35.45 g/mol) = 198.52 g/mol

Concentration in µg/mL = 0.25 mol/L x 198.52 g/mol x 1000 µg/mg = 49,630 µg/mL

Therefore, the concentration of 0.25 M SrCl2 is larger than the concentration of 0.50 M NaCl when expressed in µg/mL.

Learn more on molarity here;

https://brainly.com/question/26873446

#SPJ1

Chethen's poor performance on the first exam and subsequent quizzes and exams indicates that he may be struggling with the course material.

To prepare for the upcoming midterm, Chethen should try to identify his learning gaps, and develop a personalized study plan that addresses his weaknesses.

Out of the options given, the method that will NOT help Chethen prepare for the upcoming midterm is "Avoid collaborating with others, so as not to be distracted." Collaborating with others can help Chethen to deepen his understanding of concepts, clarify doubts, and reinforce his understanding of the material. Avoiding collaboration with others will not be beneficial for Chethen's preparation for the upcoming midterm.

Other methods that can be helpful for Chethen to prepare for the midterm include overlearning the material, looking for connections between his life and what's going on in his chemistry course, and reducing stressors in his life. Overlearning the material can help him to retain information better and improve his recall during the exam. Looking for connections between his life and what's going on in his chemistry course can help him to develop a deeper understanding of the material. Reducing stressors in his life can help him to focus better and improve his performance on the midterm.

To learn more about chemistry visit;

https://brainly.com/question/13428382

#SPJ4

Approximately 73.27% of the present amount of radioactive radium will remain after 515 years (rounded to two decimal places).

To find the percent of the present amount of radioactive radium that will remain after 515 years, you can follow these steps:

1. Use the half-life formula for radioactive decay: A(t) = A0 * (1/2)^(t/T), where A(t) is the amount remaining after time t, A0 is the initial amount, t is the elapsed time, and T is the half-life.

2. In this case, T = 1599 years (half-life of radioactive radium) and t = 515 years. The question asks for the percentage remaining, so you don't need to know the initial amount, A0.

3. Plug in the given values: A(515) = A0 * (1/2)^(515/1599).

4. Calculate the fraction: (1/2)^(515/1599) ≈ 0.7327.

5. Convert the fraction to a percentage: 0.7327 * 100 = 73.27%.

For more details about radioactive click here:

https://brainly.com/question/1770619#

#SPJ11

Burning gasoline in an automobile engine is part of the  cycle because it removes carbon compounds from the atmosphere and produces carbon dioxide as a gas in the atmosphere. It also changes other elements, such as oxygen and hydrogen, into carbon, which is released back into the atmosphere.

Burning gasoline releases energy, which plants can use for photosynthesis and convert into oxygen, completing the carbon cycle.Burning gasoline produces carbon dioxide as a gas in the atmosphere. That is how burning gasoline in an automobile engine is part of the carbon cycle. The carbon cycle is a process in which carbon is exchanged between the atmosphere, land, and water. Carbon is found in living and non-living things

. Plants and other producers in the food chain need carbon dioxide to make sugars and release oxygen into the atmosphere. Carbon is also used to build the shells of animals and to make rocks The carbon cycle is disrupted by human activities such as burning fossil fuels, which release carbon dioxide into the atmosphere.

The amount of carbon dioxide in the atmosphere has increased as a result of burning gasoline in automobiles. Burning gasoline produces carbon dioxide as a gas in the atmosphere. That is how burning gasoline in an automobile engine is part of the carbon cycle.

For more such questions on carbon

https://brainly.com/question/17409056

#SPJ11

In the part 4 of the experiment.You should proceed to the following part of the experimental procedure:

1. First, confirm that the test solution is indeed basic. You can do this by testing the solution with a pH indicator, such as litmus paper, or a pH meter. A basic solution should have a pH greater than 7.
2. If the solution is not basic, adjust the pH by adding an appropriate amount of a base, such as sodium hydroxide (NaOH), and re-test the pH until it is in the desired range.
3. Once the solution is confirmed to be basic, ensure that you are using the correct concentration of Ca(NO3)2 solution (0.1 M). Double-check your calculations and measurements if necessary.
4. If the concentration is correct, add the 0.1 M Ca(NO3)2 solution dropwise to the basic test solution while stirring. Be patient, as some precipitates may take time to form. Make sure to add enough of the Ca(NO3)2 solution to ensure that any potential precipitates have a chance to form.
5. If still no precipitate forms after adding a sufficient amount of the 0.1 M Ca(NO3)2 solution, it is possible that the particular analyte in the test solution does not form a precipitate under these conditions. In this case, you may need to explore alternative experimental procedures, such as using a different reagent or adjusting the pH further.
6. Always record your observations and results in your laboratory notebook, including any changes in color, the appearance of a precipitate, or the lack of a precipitate. This information will be useful in analyzing the data and drawing conclusions about the test solution's composition.

for more such questions on  experimental procedure.

https://brainly.com/question/8087376

#SPJ11

The formula for the transition metal cation in test tube M is Fe2+.

Step 1:

The presence of the Co2+ ions is confirmed by adding potassium nitrite acidified with acetic acid to the mixture of the four cations. A precipitate is formed, which is identified as Co(NO2)2.

The net ionic equation for this reaction is:

Co2+(aq) + 2NO2^-(aq) → Co(NO2)2(s)

Step 2:

Aqueous ammonia is added to the solution in test tube 12 until the solution is basic. A precipitate is formed, which is identified as Cu(OH)2. The net ionic equation for this reaction is:

Cu2+(aq) + 2OH^-(aq) → Cu(OH)2(s)

Step 3:

An ethanol solution of dimethylglyoxime is added to the solution in test tube 13. A precipitate is formed, which is identified as Ni(C4H7O2N2)2. The net ionic equation for this reaction is:

Ni2+(aq) + 2C4H6O2N2^-(aq) → Ni(C4H7O2N2)2(s)

Step 4:

To check that there is a final transition metal cation in the solution in test tube M, another sample of the original mixture of all four cations is tested with aqueous potassium iodide. A precipitate is formed, which is identified as FeIIs. The net ionic equation for this reaction is:

Fe2+(aq) + 2I^-(aq) → FeI2(s)

Thus, the formula for the precipitate in test tube 11 is Co(NO2)2, the formula for the precipitate in test tube 12 is Cu(OH)2, the formula for the precipitate in test tube 13 is Ni(C4H7O2N2)2, and the formula for the precipitate in the confirming test tube is FeI2.

To know more about the precipitate https://brainly.com/question/18109776

#SPJ11

The step that releases the most energy in the formation of crystal lattice of Kf is the combination of gaseous ions into ionic solid.

Generally, the crystal lattice is described as the symmetrical structural arrangements in a three dimensional manner which is done in atoms, ions or molecules (which are the constituent particles) inside a crystalline solid termed as points. Moreover, crystal lattice can be also defined as the geometrical arrangement of the atoms, ions or molecules of the crystalline solid as points present in the space.

Hence, the combination of gaseous ions into ionic solid is the step which releases the most energy.

Learn more about crystal lattice from the link given below.

https://brainly.com/question/10281663

#SPJ4

The initial volume of the container can be calculated using the ideal gas formula, PV = nRT, where P is pressure, V is volume, n is number of moles, R is gas constant, and T is temperature:

The best illustration of Avogadro's law is when a balloon is inflated. The volume of the balloon grows as you add moles of gas. Similar to how a balloon loses gas and its volume as you collapse it

According to Avogadro's law, all gases with an identical volume and the same temperature and pressure have an equal number of molecules. The volume of an ideal gas at a certain mass.

To know more about molar mass visit:-

brainly.com/question/21133305

#SPJ9

The respective answers for second order decomposition of xy are

                         a- 1424.5 s.

                         b- 9971.5 s

                         c- 1347.9 s

                         d- 0.042 m

Lets try to solve this equation-

The given rate constant (k) is 7.02 × 10-3 m-1 s-1.

The second order reaction can be represented as

A → products

The integrated rate law for second-order reaction is given as;

1/[A]t = kt + 1/[A]0 where [A]0 is the initial concentration of A.

The half-life of a second-order reaction is given by

t1/2 = 1/k[A]0

The initial concentration of the reaction = [A]0 = 0.100 m

a)

The half-life can be calculated by substituting the given values in the above equation;t1/2 = 1/(7.02 × 10-3 m-1 s-1 × 0.100 m)t1/2 = 1424.5 s

Therefore, the half-life for this reaction at an initial concentration of 0.100 m is 1424.5 s.

b)

We have to determine the time it takes for the concentration of A to decrease to 12.5% of its initial value.

The concentration of A at any time is given by the following equation;

[A]t = [A]0/(1 + kt[A]0)

0.125[A]0 = [A]0/(1 + k × t [A]0)

8 = 1 + k × t[A]0

k × t[A]0 = 7

t = 7/(7.02 × 10-3 m-1 s-1 × 0.100 m)t = 9971.5 s

Therefore, it will take 9971.5 seconds for the concentration of A to decrease to 12.5% of its initial value when the initial concentration is 0.100m.

c)

If the initial concentration of xy is 0.150m, how long will it take to decrease to 0.062 m

The concentration of A at any time is given by the following equation;

[A]t = [A]0/(1 + kt[A]0)

0.062[A]0 = 0.150m/(1 + 7.02 x 10-3 × t0.150m)

= 1347.9 s

Therefore, it will take1347.9 seconds for the concentration of A to decrease from 0.150 m to 0.062 m

d)

The concentration of A at any time is given by the following equation;

[A]t = [A]0/(1 + kt[A]0)[A]t = [0.050 m]/[1 + (7.02 × 10-3 m-1 s-1) × (500 s) × (0.050 m)] = 0.042 m

Therefore, the concentration of xy after 500 seconds is 0.042 m.

Learn more about second order kinetics : https://brainly.com/question/12984106

#SPJ11

Answer:

0.16 mol

Explanation:

you will use the ideal gas law PV=nRT where R is approximately 0.082 atm×L/mol×K

PV=nRT

n=PV/RT

n=0.8×5.2/0.082×315

n=0.16 mol

The decreasing order of reactivity towards electrophilic substitution reaction is,

               Toluene > benzene >  chlorobenzene > nitrobenzene

An electrophilic substitution reaction is defined as a chemical reaction in which the functional group attached to a compound is replaced by an electrophile. The displaced functional group of electrophilic substitution reaction is typically a hydrogen atom.

Toluene is defined as having one methyl group which is electron-donating group causing a negative charge on the carbon atom of the ring so it is highly reactive towards electrophile which is already electron deficient in nature.

Benzene is defined as having a delocalized set of electron cloud which attracts electrophile while nitro group are electronegative while causing positive charge on carbon atom so are not reactive towards electrophilic substitution reaction.

To learn more about electrophilic substitution reaction

https://brainly.com/question/14803468

#SPJ4          

The correct question is,

Write the decreasing order of reactivity towards electrophilic substitution reaction of the following compounds, benzene, chlorobenzene, nitrobenzene and toluene.

In 1904, after the disclosure of the electron, the English physicist Sir J.J. Thomson proposed the plum pudding model of a particle.

In this model, the particle had an emphatically accused space of adversely charged electrons implanted inside it i.e., like a pudding (decidedly charged space) with plums (electrons) inside.

In 1911, one more physicist Ernest Rutherford proposed one more model known as the Rutherford model or planetary model of the particle that portrays the construction of molecules. In this model, the little and thick particle has a decidedly charged center called the core. Additionally, he suggested that very much like the planets rotating around the Sun, the adversely charged electrons are moving around the core.

By directing a gold foil tray, Rutherford invalidated Thomson's model. In this examination, decidedly charged alpha particles discharged from a radioactive source encased inside a defensive lead were utilized which was then engaged into a restricted bar. It was then gone through a cut before which a flimsy segment of gold foil was put. A fluorescent screen (covered with zinc sulfide) was likewise positioned before the cut to identify alpha particles which on striking the fluorescent screen would create shine (an eruption of light) which was noticeable through a magnifying instrument connected to the rear of the screen.

He saw that the vast majority of the alpha particles went straight through the gold foil with no opposition and this inferred that iotas contain a lot of open space. The slight redirection of a portion of the alpha particles, the enormous point dissipating of other alpha particles, and, surprisingly, the quick returning of not many alpha particles toward the source proposed their cooperations with other emphatically charged particles inside the iota.

Thus, he inferred that main a thick and emphatically charged molecule, for example, the core would be liable for such solid repugnance. Additionally, the adversely charged electrons electrically adjusted the positive nuclear charge and they moved around the core in roundabout circles. Between the electrons and core, there was an electrostatic power of fascination very much like the gravitational power of fascination between the sun and the spinning planets.

Afterward, the Rutherford model was supplanted by the Bohr nuclear model.

to know more about the nuclear model click here:

https://brainly.com/question/18521318

#SPJ4

The element with an average atomic mass of 2.180 x  [tex]10^{-22}[/tex] g is Boron (B).

The element with atoms having an average atomic mass of 2.180 x [tex]10^{-22}[/tex] g is Boron. To determine this, follow these steps:

1. Convert the given atomic mass to atomic mass units (amu) by dividing by the conversion factor 1.66054 x  [tex]10^{-24}[/tex] g/amu:
  (2.180 x  [tex]10^{-22}[/tex] g) / (1.66054 x  [tex]10^{-24}[/tex] g/amu) ≈ 13.11 amu

2. Compare the calculated atomic mass to the periodic table to find the element with a close atomic mass. In this case, Boron (B) has an atomic mass of approximately 10.81 amu.

To know more about Atomic Mass:

https://brainly.com/question/29117302

#SPJ11

The attraction of a metallic cation for delocalized electrons is known as "metallic bonding".

This type of bonding occurs when the valence electrons of the metal atoms become delocalized and form a "sea of electrons" that all the metal cations are able to move around in. This movement of electrons allows the metal cations to have electrostatic interactions with each other, leading to strong bonding.

The attraction of a metallic cation for delocalized electrons is known as metallic bonding.Metallic bonding refers to the bonding between metallic atoms. The valence electrons of the metallic atoms, in this case, are free to move throughout the entire crystal, creating a “sea” of electrons.

The positively charged metallic ions are then held together by this sea of electrons. The attraction between the positively charged metal ions and the negatively charged electron sea is known as metallic bonding.In metallic bonding, the valence electrons are delocalized and shared between many atoms, resulting in strong bonds.

These electrons are free to move throughout the metal lattice, resulting in high electrical and thermal conductivity as well as malleability and ductility. Metals also have high melting and boiling points, which is also a result of the strong metallic bonds between the atoms.

Learn more about metallic bonding here:

brainly.com/question/29762857

#SPJ11

In the subsequent reaction, at STP, 72.7 litres of oxygen will result in 43,62 litres of carbon dioxide.

How sulfur(IV) oxide, or SO2, is made and its properties. Sulfur(IV) oxide is also referred to as sulphur dioxide in everyday speech. It is a chemical compound with the formula SO2 whose molecule is made up of one sulphur atom and two oxygen atoms.

C3H8 + 5O2 → 3CO2 + 4H2O

According to the balanced equation, 3 moles of CO2 are produced for every 5 moles of O2 used. Therefore, we can use the following proportion to find the volume of O2 required to produce 43.62 liters of CO2 at STP:

5 L O2 / 3 mol CO2 = x L O2 / 43.62 L CO2

We need to first find the number of moles of CO2 produced

43.62 L CO2 × 1 mol CO2 / 22.4 L = 1.95 mol CO2

Using the balanced equation, we can see that 5 moles of O2 are required to produce 3 moles of CO2.

1.95 mol CO2 × 5 mol O2 / 3 mol CO2 = 3.25 mol O2

Finally, we can use the ideal gas law to find the volume of O2 required at STP:

PV = nRT

V = nRT / P

V = (3.25 mol)(0.0821 L·atm/K·mol)(273 K) / (1 atm) = 72.7 L

To know more about carbon dioxide visit:-

https://brainly.com/question/3049557

#SPJ1

Two friends push with great force against a rock. The forces are equally strong but in opposite directions. A heavy box rests on top of the rock. Rock does not move because equal forces are applied on both sides.

A force is an influence that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to define force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

Force is used to describe a body's tendency to alter or change its condition as a result of an external cause. When force is applied, the body may also alter its size, shape, and direction. kicking a ball, opening and closing doors, or mixing dough are some examples.

Thus, rock does not move because equal forces are applied on both sides.

Hope this helps!!! :)

The color change from red to yellow in fermentation tests occurs due to the production of acid by the bacteria during fermentation.

In these tests, bacteria are inoculated into a test tube containing a sugar (such as glucose, lactose, or sucrose) and a pH indicator (such as phenol red or bromcresol purple) in a nutrient broth medium. The bacteria use the sugar as a source of energy and produce metabolic end-products such as acids, gases, and alcohols. The pH indicator changes color depending on the pH of the medium, allowing the detection of fermentation.

If the bacteria are capable of fermenting the sugar, they will produce acid as an end-product, which lowers the pH of the medium. This acidic environment causes the pH indicator to change from red to yellow. The degree of acid production and the resulting color change depend on the type of sugar, the type of bacteria, and the incubation conditions.

Thus, the color change from red to yellow in fermentation tests indicates a positive result for fermentation, indicating that the bacteria are capable of utilizing the sugar in the medium and producing acid as a metabolic end-product.

To know more about fermentation here

https://brainly.com/question/13050729

#SPJ4

The compound that will have the strongest dipole-dipole interactions between its molecules is [tex]CH_{2}F_{2}[/tex] (option D).

Dipole-dipole interаctions occur when two polаr molecules come into contаct with one аnother. The positive end of one molecule is аttrаcted to the negаtive end of the other, resulting in the formаtion of а dipole-dipole interаction. The strength of dipole-dipole interаctions is influenced by fаctors such аs moleculаr shаpe аnd size, аs well аs the polаrity of the molecule.

In this question, [tex]CH_{2}F_{2}[/tex] will hаve the strongest dipole-dipole interаctions between its molecules becаuse it is а polаr molecule with а [tex]CH_{2}F_{2}[/tex] shаpe. [tex]CF_{4}[/tex] is non-polаr, so it will not experience dipole-dipole interаctions. [tex]CH_{4}[/tex] is аlso non-polаr, so it will not experience dipole-dipole interаctions. [tex]CH_{3}F[/tex] is polаr, but it is less polаr thаn [tex]CH_{2}F_{2}[/tex]. [tex]CH_{3}Cl[/tex]CH3Cl is аlso polаr, but it is less polаr thаn [tex]CH_{2}F_{2}[/tex].

To learn more about dipole-dipole interаctions, click here: https://brainly.com/question/31041467

#SPJ11

The pH range of the distal esophagus is 6.0 to 7.0. The lower esophagus pH is considered neutral (normal).

1. The esophagus is a muscular tube that connects the mouth to the stomach. Its main function is to transport food and liquids from the mouth to the stomach for digestion.
2. The pH scale is a measure of the acidity or alkalinity of a substance, ranging from 0 (highly acidic) to 14 (highly alkaline), with 7 being neutral.
3. The distal esophagus is the lower part of the esophagus, which is closest to the stomach.
4. The pH of the distal esophagus is crucial for maintaining the proper function of the esophageal muscles and preventing damage to the esophageal lining from stomach acid.
5. The pH range of the distal esophagus is 6.0 to 7.0, which is considered neutral or normal. This pH level helps to protect the esophagus from the acidic contents of the stomach and maintain proper function.
6. The four options given in the student question are: a. 1.5 to 2.0, b. 3.0 to 4.5, c. 4.5 to 6.0, and d. 6.0 to 7.0. Out of these, option d (6.0 to 7.0) is the correct answer for the pH range of the distal esophagus.

for more such questions on  esophagus.

https://brainly.com/question/14358838

#SPJ11

Conversion of Ethyne into Ethanol:

The ethanal can be prepared by the ethyne by treating the ethyne with mercuric sulphate in presence of acid. First the mercury attacks on the reactant ethyne and forms a cyclic structure. Then water attacks on this cyclic structure forming a mercury cation. Then by the removal of hydride alcohol forms.

Hydration of Ethyne:

Alkynes readily combine with water in the presence of acid (usually sulfuric acid) and mercury(II) salts (usually the sulfate is used) to form carbonyl compounds, in a process known as Kucherov's reaction. In the case of acetylene (ethyne) the product is acetaldehyde (ethanal), while other alkynes form ketones.

False. At 1 atm of pressure and 0°C (273.15 K), one mole of an ideal gas takes up 22.4 litres of space rather than 44.0 litres.

0oC (273.15K) and 1atm of pressure are considered standard temperature and pressure (STP). A mole (6.021023 typical particles) of any gas takes up 22.4L at STP .

A perfect gas has a volume of 22.41 L/mol at STP. 22.4 L is the least significant and most easily recalled chemical number.

To know more about ideal gas visit:-

https://brainly.com/question/28257995

#SPJ1

The given statement is true. PAH is an acronym for polycyclic aromatic hydrogen.

The term "polycyclic aromatic hydrocarbons" (PAHs) refers to a large class of diverse organic compounds with two or more fused aromatic rings. These compounds range from simple two-ring compounds like naphthalene and its derivatives to more intricate ring structures with up to 10 rings.

Chemicals known as polycyclic aromatic hydrocarbons (PAHs) are found in coal, crude oil, and gasoline in their natural forms.

They result from the burning of tobacco, coal, oil, gas, and wood. In the air, PAHs can join with or create tiny particles. PAHs are created during the high-heat cooking of meat and other foods.

To know about aromatic

https://brainly.com/question/30899828

#SPJ4

2Hg + O2 -> 2HgO: This reaction is a synthesis reaction where two elements, mercury (Hg) and oxygen (O2), combine to form a compound, mercury oxide (HgO).

The balanced chemical equation for this reaction is:

2Hg + O2 -> 2HgO

The oxidation state of mercury changes from zero to +II, and the oxidation state of oxygen changes from zero to -II.

Cu(NO3)2 + 2Ag -> 2AgNO3 + Cu: This reaction is a single-displacement reaction where an element in a compound is replaced by another element. In this case, silver (Ag) replaces copper (Cu) in copper(II) nitrate (Cu(NO3)2) to form silver nitrate (AgNO3) and copper (Cu).

The balanced chemical equation for this reaction is:

Cu(NO3)2 + 2Ag -> 2AgNO3 + Cu

The oxidation state of copper changes from +II to zero, and the oxidation state of silver changes from zero to +I.

Ca(OH)2 + H2 -> CaO + 2H2O: This reaction is a decomposition reaction where a compound breaks down into simpler substances. In this case, calcium hydroxide (Ca(OH)2) decomposes into calcium oxide (CaO) and water (H2O).

The balanced chemical equation for this reaction is:

Ca(OH)2 + H2 -> CaO + 2H2O

The oxidation states of calcium and hydrogen do not change in this reaction.

BaSO4 + 2NaCl -> BaCl2 + Na2SO4: This reaction is a double-displacement reaction where ions in two compounds exchange places to form two new compounds. In this case, barium sulfate (BaSO4) reacts with sodium chloride (NaCl) to form barium chloride (BaCl2) and sodium sulfate (Na2SO4).

The balanced chemical equation for this reaction is:

BaSO4 + 2NaCl -> BaCl2 + Na2SO4

The oxidation states of barium, sulfur, sodium, and chlorine do not change in this reaction.

Learn more about product of reaction here: https://brainly.com/question/20322602

#SPJ1

an atom of a mystery element contains 7 protons, 7 neutrons, and 7 electrons the mass number of the mystery element is 14.

calculation: by adding the number of protons and neutrons together (7 + 7 = 14). The number of protons and neutrons in an atom determines its mass number, while the number of electrons determines its charge.

Atoms are composed of three main subatomic particles: protons, neutrons, and electrons. Protons have a positive charge and are located in the nucleus of an atom, while neutrons are neutral particles also found in the nucleus. Electrons are negatively charged and are located in the electron cloud.

The mass number of an atom is the sum of the protons and neutrons in its nucleus. Therefore, the mass number of an atom with 7 protons, 7 neutrons, and 7 electrons is 14. When talking about atoms, scientists often refer to the atomic number, which is the number of protons in the nucleus. In this case, the atomic number of the mystery element is 7, since it has 7 protons. The atomic number of an atom is important for identifying it, as each element has a different atomic number.

In summary, an atom of a mystery element that has 7 protons, 7 neutrons, and 7 electrons has a mass number of 14.  The atomic number of this element is also 7, as it has 7 protons.

Know more about atomic number  here:

https://brainly.com/question/28992636

#SPJ11  

Explanation:

To determine the pH of the original acid, we first need to determine the number of moles of NaOH used to neutralize the acid.

Number of moles of NaOH = Molarity x Volume (in liters) = 0.00050 mol/L x 0.01 L = 5.0 x 10^-6 mol

Since NaOH reacts with the acid in a 1:1 ratio, the number of moles of acid present in the sample is also 5.0 x 10^-6 mol.

Now, we can use this information to calculate the concentration of the acid:

Concentration of acid = Number of moles / Volume (in liters) = 5.0 x 10^-6 mol / 0.002 L = 0.0025 mol/L

Next, we can use the concentration of the acid to calculate its pKa value. We can do this using the Henderson-Hasselbalch equation:

pKa = pH + log([A-]/[HA])

where [A-] is the concentration of the conjugate base of the acid, and [HA] is the concentration of the acid.

In this case, since the acid has been neutralized, the concentration of its conjugate base is equal to the concentration of the acid. Therefore, we can simplify the equation to:

pKa = pH + log(1) pKa = pH

Finally, we can use the pKa value to calculate the pH of the original acid:

pH = pKa = -log(Ka)

Since we don't know the identity of the acid, we can't look up its pKa value directly. However, we can make some assumptions based on the typical pKa values for different types of acids. For example, if we assume that the acid is a weak organic acid, its pKa value is likely to be in the range of 4-5.

Using a pKa value of 4.5 as an estimate, we can calculate the pH of the original acid:

pH = 4.5

Therefore, the pH of the original acid is approximately 4.5.

180°: Linear, VSEPR number 2

107°: Trigonal bipyramidal, VSEPR number 5

120°: Trigonal planar, VSEPR number 3

Molecular geometry refers to the three-dimensional arrangement of atoms in a molecule. It determines the shape of the molecule and the relative positions of its atoms in space. The molecular geometry is determined by the number of atoms and the types of bonds between them.

The concept of molecular geometry is important in chemistry because it determines the physical and chemical properties of the molecule, such as its reactivity, polarity, and biological activity.

Learn more about molecular geometry:https://brainly.com/question/7558603

#SPJ1

The advantage of using a 50:50 mixture of ethanol and water to rinse the crystals, as opposed to distilled water or pure ethanol, is that it combines the properties of both solvents.

This is beneficial as it allows for effective removal of impurities from the crystals without dissolving them.

Ethanol helps to dissolve organic impurities, while water helps to dissolve inorganic impurities.

Combining the two solvents results in a more thorough and efficient cleaning of the crystals, compared to using either distilled water or pure ethanol alone.

By using a mixture, both types of impurities can be removed without harming the crystals.

This makes it a more effective solution for rinsing crystals, as it takes advantage of the strengths of each solvent to provide a more complete cleaning.

Read more about ethanol.

https://brainly.com/question/13622469

#SPJ11

The final organic product of the reaction C₆H₅COCl ⇒ (i) LiAl(OC(CH₃)₃)₃H / (ii) H₃O⁺ is C₆H₅CH₃.

These are the four "prototypical" organic chemistry reactions, though several others which can be categorized as one of these are generally referred to by other names.

This reaction involves the reduction of C₆H₅COCl (benzoyl chloride) using LiAl(OC(CH₃)₃)₃H (lithium tri-tert-butoxyaluminum hydride) as a reducing agent, followed by the addition of H₃O⁺  (hydronium ion) to protonate the intermediate and yield toluene. The final organic product of the reaction would be C₆H₅CH₃, also known as toluene.

Your question is incomplete, but most probably your question can be seen in the Attachment.

Learn more about organic product: https://brainly.com/question/30905538

#SPJ11

The volume of the object is 960 cc or cm³.

The amount of space an object takes up in three dimensions is known as its volume. The length, width, and height of a rectangular prism must be multiplied in order to get its volume.

In this instance, the rectangular prism's measurements are 5 cm, 16 cm, and 12 cm. We just combine all three of these dimensions together to determine the volume using the following formula:

Volume = Length x Width x Height

Substituting the values, we get:

Volume = 5cm x 16cm x 12cm

Volume = 960 cubic centimeters (cc) or cubic centimeters (cm³)

Therefore, the volume of the object is 960 cc or cm³.

learn more about dimensions here

https://brainly.com/question/27404871

#SPJ1