A Copper rod whese lenght at 30°C is 10cm is heated find its new length. Take linear expansivity of copper as 0000017k​

Option 3 shows the shape of the resultant pulse when the centers of the

pulses, points P and Q, coincide.

What is a pulse of a wave?

A pulse of a wave is a single disturbance or vibration that travels through a medium, carrying energy without permanently displacing the medium. It is a type of wave that is characterized by a single disturbance or oscillation that travels through a medium, such as air or water, and creates a temporary disturbance in the medium's equilibrium. A wave pulse can be described by its amplitude (the height of the disturbance), its wavelength (the distance between successive peaks or troughs), and its speed (the rate at which the disturbance travels through the medium).

Q's crest amplitude = Q's Trough amplitude= P's Crest amplitude

and P's wavelength = Q's wavelength

then when you lay them on top of each other

Q's crest combines in phase with the first half of P's crest and they double where as

Q's trough combines out of phase with the second half of P's crest and they negate each other

resulting in something that looks like choice 3

Therefore, Option 3 is the correct answer.

To learn more about wave pulse the link

https://brainly.com/question/30631912

#SPJ1

Minerals are any chemical substance which forms naturally in the Earth

Define mineral.

Minerals are those substances found in foods and in the earth that our systems require for healthy growth and development. Calcium, phosphate, potassium, sodium, chloride, magnesium, iron, zinc, iodine, chromium, copper, fluoride, molybdenum, manganese, and selenium are among the nutrients that are crucial for good health.

Compounds found only in living creatures are typically not considered minerals according to geological definitions. However, some minerals, like calcite, are frequently biogenic or, in terms of chemistry, are organic molecules (such as mellite). Additionally, living things frequently produce inorganic crystals (like hydroxylapatite), which are also found in rocks.

To learn more about Minerals  use:

https://brainly.com/question/27737827

#SPJ1

Answer:

(b) the speed of light depends on the index of refraction of the medium thru which it is traveling - different colors have different indices of refraction and are refracted at different angles

Answer:

Explanation:

Given,

We need to find the wavelength of sound wave :

We know that ,

where,

on substituting the values we get :

[tex]\dashrightarrow \sf \: 220 = \dfrac{680}{\lambda} \\ \\ \dashrightarrow \sf \: \lambda = \frac{680}{220} \\ \\ \dashrightarrow \sf \:\lambda = 3.0909 \: m\\ [/tex]

Hence,

Answer:

V = sqrt(2gh)

V = sqrt(2 * 9.8 * 10)

V = sqrt (196)

V = 14 m/s

Answer:

V = sqrt(2gh)

V= sqrt(29.8 10)

V = sqrt (196)

V=14 m/s

Just the phone and battery should be where they should be on the photographs.

The term "matter" refers to a substance that is composed of several kinds of particles, occupies space, and has inertia. The numerous kinds of particles each have a unique mass and size, according to the fundamentals of current physics. The electron, proton, and neutron are three of the most well-known instances of material particles.

All objects with mass and volume are considered to be matter (takes up space). It is usually pretty easy to show that the everyday items we interact with have mass and occupy space.

To know more about Matter visit:

https://brainly.com/question/28945834

#SPJ1

The temperature of the laser rod increases by 21.33 degrees Celsius each minute due to the failure of the cooling system.

When heat is transferred to an object, its temperature increases. The amount of temperature increase depends on the amount of heat transferred, the mass of the object, and its specific heat.

To calculate the temperature increase of the laser rod, we can use the formula:

ΔT = Q / (m * c)

where ΔT is the change in temperature, Q is the heat absorbed, m is the mass of the laser rod, and c is the specific heat of the material.

In our case, the laser rod is a closed system, and the heat added is 64 kcal per minute.

Substituting the given values, we get:

ΔT = 64 kcal / (5 kg * 0.3 kcal/kg•Co)

ΔT = 21.33 Co

Read more about Thermodynamics:

https://brainly.com/question/11211088

#SPJ4

The expression for the acceleration is the same in both cases, indicating that the moment of inertia of the pulley does not affect the acceleration of the masses.

An Atwood's machine consists of two masses connected by a rope that passes over a pulley. The acceleration of the masses can be found by applying Newton's second law to each mass separately. The force due to gravity and the tension in the rope are the only forces acting on the masses.

If we consider the moment of inertia of the pulley, the acceleration can be found using the net forces on each mass. However, if we ignore the moment of inertia of the pulley, the acceleration can be found using the net force on the system. However, the expression for the acceleration is the same in both cases, meaning that the moment of inertia of the pulley does not affect the acceleration of the masses.

To know more about Atwood's machine, here

brainly.com/question/28833047

#SPJ4

For eligible renewable energy technology and projects, a number of tax credits, grants, and loan programmes are offered by the federal government.

Fossil fuels are burned to produce energy, which produces a sizable amount of greenhouse gas emissions that contribute to global warming. Even when taking into account the entire life cycle of the technologies, the majority of renewable energy sources produce negligible to no emissions.

Subsidies have helped reduce dependency on fossil fuels by expanding the use of renewable energy sources. This is crucial for lowering greenhouse gas emissions and preventing an increase in global temperatures.

To know more about renewable energy visit:-

brainly.com/question/29792091

#SPJ1

Ionic compounds can be created when elements from Groups 1 and 17 mix one to one ratio.

To create ionic compounds, group 1 and group 17 elements can combine one to one.

In addition, group 8A (or VIIIA) of the periodic table contains the noble gases or inert gases helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), and radon. As a result, if any elements from this group are present, they will not bond (Rn).

The name of these elements refers to how little they react with other elements or compounds. An example of bonding is, when carbon and oxygen atoms join in a 1:2 ratio, carbon dioxide is produced; when they combine in a 1:1 ratio, carbon monoxide, or CO, is produced.

To know more about elements, visit,

https://brainly.com/question/20096027

#SPJ4

Answer:

I believe that the Big Bang Theory is a valid explanation for the beginning of time. Areas of research that have the greatest potential for more discovery include dark matter and dark energy, the nature of the inflationary period, and the origin of the matter-antimatter asymmetry.

Problems with the Big Bang Theory that lead me to reject it include the lack of a satisfactory explanation for the origin of the initial conditions of the universe, the lack of a satisfactory explanation for the origin of the matter-antimatter asymmetry, and the lack of a satisfactory explanation for the origin of the inflationary period. An alternate theory could be the Cyclic Universe Theory, which proposes that the universe goes through an infinite cycle of expansion and contraction.

For the given question value of mass=20kg. The formula for gravitational attraction between two masses is:

F = G * (m1 * m2) / r^2

where F is the gravitational force, G is the gravitational constant, m1 and m2 are the masses, and r is the distance between the centers of the masses.

Given:

F = 6.7 * 10^-9 N

r = 2 m

G = 6.7 * 10^-11 N m^2 / kg^2 (gravitational constant)

Since the two masses are equal, we can write m1 = m2 = m.

Substituting the given values into the formula and solving for m, we get:

6.7 * 10^-9 N = 6.7 * 10^-11 N m^2 / kg^2 * (m^2 / (2 m)^2) * m^2

Simplifying:

6.7 * 10^-9 N = 6.7 * 10^-11 N * m^2 / 4

Multiplying both sides by 4:

m^2 = (6.7 * 10^-9 N * 4) / 6.7 * 10^-11 N

Simplifying:

m^2 = 4 * 10^2 kg

Taking the square root of both sides:

m = 20 kg

thus, each mass has a value of 20 kg.

To learn about gravitational attraction visit:

https://brainly.com/question/19822389?referrer=searchResults

#SPJ4

Density of the plastic is 0.9 g/cm³.

The type of plastic collected are yogurt cups and plasticwares.

Density of a substance is defined as the mass per unit volume of the substance.

Here,

Mass of the plastic, m = 2.2 g

Volume of the plastic, V = 2.5 cm³

So, density, ρ = m/V

   ρ = 2.25/2.5

   ρ = 0.9 g/cm³

Recyclable plastics are sorted on the basis of their densities. Here, the density of the collected plastic is 0.9 g/cm³. So, the plastic material must be  yogurt cups and plasticwares.

Hence,

Density of the plastic is 0.9 g/cm³.

The type of plastic collected are yogurt cups and plasticwares.

To learn more about density, click:

https://brainly.com/question/29510253

#SPJ1

The density of the plastic found inside the box would be = 960kg/m³

The volume of the box at the recycling center= 0.125m³

The mass of the full box = 120kg

The formula use to calculate the density of the plastic = mass/volume.

That is ; Density = mass /volume = kg/m³

Density = 120/0.125

= 960kg/m³

The type of plastic that is in the box is LDPE (low density polyethylene). This is because the density calculate fell within the range of 940–960 kg/m3.

Learn more about density here:

https://brainly.com/question/26364788

#SPJ1

Complete question:

A recycling center has a 0.125 m³ box filled with one type of plastic. The full box has a mass of 120 kilograms. What is the density of the plastic? What type of plastic is in the box? JUSTIFY your answer.

The negative sign of the force implies that it is in the opposite direction of other force to be in equilibrium.

The force of attraction or repulsion occurring between two charged particles is known as electrostatic force. It is also known as Coulomb's force.

Here,

The three point charges are placed rectilinearly at equal distances of 20m apart. Thus they can be shown as an equilateral triangle of side 20 mm and the three point charges are placed at its corners.

So, when the electrostatic forces between the point charges are calculated, the force exerted by A on B is -135 N.

The negative sign of the force implies that it is opposite to the direction of the rest of force. That means the force exerted by A on B  and the remaining resultant forces must be equal and opposite in direction. This is to attain equilibrium of forces.

Hence,

The negative sign of the force implies that it is in the opposite direction of other force to be in equilibrium.

To learn more about electrostatic forces, click:

https://brainly.com/question/9774180

#SPJ9

The minimum current through R1 will be 10mA.

Using Ohm's Law (V = IR), we can find the minimum current through R1 as follows:

Vr1 = Vz5 + Vz6

where Vr1 is the voltage across resistor R1.

Therefore, the minimum current through R1 is:

Ir1 = Vr1 / R1

Assuming that R1 is a standard value resistor (e.g., 1kΩ), and the Zener voltages are each 5V, the voltage across R1 will be:

Vr1 = Vz5 + Vz6 = 5V + 5V = 10V

Therefore, the minimum current through R1 will be:

Ir1 = Vr1 / R1 = 10V / 1kΩ = 10mA

Current is the flow of electric charge through a conductor or material. It is defined as the rate of flow of electric charge, measured in units of amperes (A). One ampere is equivalent to the flow of one coulomb of electric charge per second.

Electric current is caused by the movement of charged particles, typically electrons, in a circuit. When a voltage is applied to a conductor, it creates an electric field that causes electrons to move through the conductor. This flow of electrons constitutes an electric current.

The direction of electric current is defined as the direction of flow of positive charges, even though the actual charges that move are electrons, which are negatively charged. Electric current can be direct current (DC), where the flow of charge is in one direction, or alternating current (AC), where the direction of flow periodically changes.

To learn more about Current visit here:

brainly.com/question/23323183

#SPJ4

The words that fill the blanks are;

increases

decreases

Force and acceleration are directly proportional to each other, according to Newton's second law of motion. The law states that the acceleration of an object is directly proportional to the force applied to it, and inversely proportional to its mass. Mathematically, this can be expressed as:

F = ma

where F is the force applied to an object, m is its mass, and a is its resulting acceleration.

Learn more about force:https://brainly.com/question/13191643

#SPJ1

Answer:

Explanation:

Given that ,

A man who weights is 50N climbs up 100 steps of a stair

each step is 0.2m high

mg=50N

Height at 100 steps , h=100×0.2=50 m

Change in potential energy , =mgh=50×50=2500 J

So, Work done by the man , W=2500 J

The gravitational force between them and the orbital speed of Jupiter is 4.385×10^23 N and 13.081 km/s.

Mass of Jupiter, m = 2 × 10^27 kg

Mass of Sun, M = 2 × 10^30 kg

the radius of Jupiter's orbit, R = 7.8 × 10^11 m

=> distance b/w Sun and Jupiter = radius of the Jupiter's orbit = R

Gravitational force b/w them = GMm/(R^2)

= (6.67 × 10^-11)×(2 × 10^30)×( 2 × 10^27) / (7.8 × 10^11)^2

= 4.385×10^23 N

since, centripetal force = centrifugal force

=> F = GMm/(R^2) = (mv^2)/R

=> v = √(GM/R) = 13.081 km/s

Gravitational force is a fundamental force in physics that governs the interactions between massive objects. According to Newton's law of gravitation, every object in the universe exerts a gravitational force on every other object, with the strength of the force proportional to the product of their masses and inversely proportional to the square of the distance between them.

The gravitational force between two objects causes them to attract each other, with the direction of the force being along the line connecting the centers of the objects. The gravitational force is always attractive and never repulsive, and it is responsible for many phenomena in the universe, from the orbits of planets around the Sun to the motion of stars within galaxies.

To learn more about Gravitational force visit here:

brainly.com/question/11944606

#SPJ4

Complete Question:

The planet Jupiter of mass 2 x 1027Kg revolves around the sun of mass 2 x 10"kg in a circular orbit of radius 7.8 x 10''m. Calculate the gravitational force between them and the orbital speed of Jupiter.​

The voltage drop across the tungsten filament in a 100W light bulb is 120 volts.

We can use Ohm's Law to find the voltage drop across the tungsten filament:

V = I * R

Where

Substituting the given values, we get:

V = (0.833 A) * (144 Ω)

V = 120 V

Therefore, the voltage drop across the tungsten filament in a 100W light bulb is 120 volts.

Learn more about ohm's Law here : brainly.com/question/231741

#SPJ1

Using the model, the absolute maximum value of acceleration is 21.698 m/s² and the absolute minimum value of acceleration is 14.597 m/s² between liftoff and the jettisoning of the solid rocket boosters.

Solid rocket boosters (SRBs) are large rocket engines used to provide the majority of the thrust required for a spacecraft during its initial launch phase. They are called “solid” because they contain solid propellant, that burns at a controlled rate to produce thrust.

In the given problem:

We know,

v(t)=0.001500000t³-0.08t²+16.02t-2.37

Acceleration will be derivative of velocity

Hence, a=dv/dt=0.0045t2-0.16t+16.02

at t=0,a=16.02 m/s²

Now the maximum acceleration will be at endpoint i.e., t=57.5s

so at t=57.5 s, a=21.698 m/s²

For minimum acceleration, a'(t)= 0.009t-0.16<0

t<17.77

Minimum acceleration will be at t=17.77 s, a(t)=14.597 m/s²

Learn more about solid rocket boosters, here:

https://brainly.com/question/6334312

#SPJ1

The question is incomplete, but most probably the complete question is,

A University of Rochester student decided to depart from Earth after his graduation to find work on Mars. Before building a shuttle, he conducted careful calculations. A model for the velocity of the shuttle, from liftoff at t = 0 s until the solid rocket boosters were jettisoned at t = 57.5 s, is given by (in feet per second). Using this model, estimate:

the absolute maximum value = ??

and absolute minimum value - ??

of the ACCELERATION of the shuttle between liftoff and the jettisoning of the boosters.

The earth quakes are produced due to the sudden movements of tectonic plates in the earth's crust. The earthquake is one of the major natural disasters.

An earthquake is defined as the shaking of the surface of the earth because of the sudden release of energy in the earth's crust. The waves created during the earthquake are called seismic waves.

The Qinghai earthquake was one of the severe earthquake which occurred on April 14, 2010 in the isolated southern Yushu Tibetan area in  Qinghai province, which is in china on the northeastern portion of the plateau of Tibet.

Many peoples were killed and damaged many belongings also.

To know more about earthquake, visit;

https://brainly.com/question/856294

#SPJ9

Answer:

A packing crate of weight 50N is placed on a plane inclined at 35°from the horizontal. If the coefficient of static friction between the crate and the plane is 0.65, will the crate slide down the plane? asked by Siyam February 26, 2022 1 answer normal force = m g cos 35 = 50 cos 35 = 41 Newtons so max friction force up slope = 0.65 * 41 = 26.6 N

Explanation:

Explanation:

itd D because a and b both have something to represent the answer

Answer:

true

Explanation:

By adding a thin layer of oil or even water between two objects, you convert the sliding friction to fluid friction.

Answer:

Yes, they never break trust. The answer is water. It falls in the waterfall but never breaks, and it breaks in the surf from the incoming tide, but never falls.

Explanation:

If the final potential difference across the 69micro -f then capacitor is 40Mf

We cannot expect simple energy conservation to hold because energy is presumably dissipated as heat in the connection wires or as radio waves while the charge oscillates during the system "settling down" to its final state (40V across the parallel pair of capacitors C and 60 F).

We anticipate that charge will be conserved. Thus, if Q is the initial charge stored on C and q 1 and q2 are the charges on the parallel pair after "settling down," then -

Q= q1+ q2

C(100V) = C(40V) + 60mf(40V)

C= 40Mf

An electrical component that stores electrical energy in an electric field is known as a capacitor. It is made up of two conductive plates separated by a nonconductive material known as a dielectric.

learn more about capacitor here:

https://brainly.com/question/17176550

#SPJ4

The constituent particles of material A are heavier than those of material B.

A material with smaller, more heavy, and closely spaced atoms will have a higher density. A substance's density will decrease if its bigger, lighter atoms are separated from one another more widely.

The densities of solids, liquids, and gases are determined by the separations between the particles in each state of matter.

To know more about density -

https://brainly.com/question/30949455

#SPJ1

The approximate TOD of the victim is Maybe around 4:30 pm.

The liver temperature can provide a more accurate representation of the genuine core body temperature, hence it is ideal to take the temperature either rectally or by monitoring the liver temperature.To do this, a tiny incision must be made in the right upper belly, and the thermometer must be inserted into the liver tissue.

This stiffening process, known as rigor mortis, occurs at a fairly known time, making it possible to predict when someone will pass away.In overall: If the body is warm and there is no rigidity, the time of death was less than three hours ago.If the body is stiff and warm, death happened 3 to 8 hours earlier.

To Know more about victim visit:

https://brainly.com/question/10999364

#SPJ1