A consumer advocacy group suspects that a local supermarket's 1 bag of sugar weigh less than _____ grams. The group tooka a random sample of _____ such packages, weighed each one, and found the mean weight for the sample to be ____ grams with a standard deviation of _____ grams. Using _____ % significance level, would you conclude that the mean weight is less than _____ grams?

The amount of water that leaks from the bucket each hour is 38 ounces/hour.

The amount of water in the bucket at 8 am would have been 380 ounces. The bucket will be empty after 8 hours, or at 6 pm.

To find the amount of water that leaks from the bucket each hour, we can use the information that the leak is at a constant rate. We can find the total amount of water that leaked out of the bucket from 10 am to 3 pm, which is 304 - 114 = 190 ounces.

This is over a time period of 5 hours (from 10 am to 3 pm), so the amount of water that leaks from the bucket each hour is:

190 ounces ÷ 5 hours = 38 ounces/hour

To find how many ounces of water were in the bucket at 8 am, we need to estimate the amount of water that leaked out from 8 am to 10 am. We know that the bucket loses 38 ounces of water every hour, so from 8 am to 10 am (2 hours), the amount of water that leaked out would be:

38 ounces/hour x 2 hours = 76 ounces

Therefore, the amount of water in the bucket at 8 am would have been:

304 ounces + 76 ounces = 380 ounces

To find at what time the bucket will be empty, we can assume that the leak rate remains constant at 38 ounces/hour. We know that the bucket starts with 304 ounces, so we can set up the equation:

y = 304 - 38x

where y is the amount of water in the bucket and x is the time in hours since the leak began. When the bucket is empty, y will be zero, so we can solve for x:

0 = 304 - 38x

38x = 304

x = 8

Therefore, the bucket will be empty after 8 hours, or at 6 pm.

The equation for the amount of water in the bucket as a function of time can be written in slope-intercept form as:

y = -38x + 304

where the slope (m) is -38 (the rate at which water is leaking out of the bucket) and the y-intercept (b) is 304 (the initial amount of water in the bucket).

To know more about equation, refer to the link below:

https://brainly.com/question/29987959#

#SPJ11

The critical numbers of f(x) are x = -1, 0, and 1 and The sum of all critical numbers is 0.

To find the critical numbers of f(x) = x²/4(x+1), we need to find the values of x where the derivative of f(x) is equal to zero or does not exist.

The derivative of f(x) is:

f'(x) = [(x+1)(2x) - x²(4)] / [4(x+1)²]

Simplifying, we get:

f'(x) = [2x(x+1) - 4x²] / [4(x+1)²]

f'(x) = [2x(x+1-2x)] / [4(x+1)²]

f'(x) = [2x(1-x)] / [4(x+1)²]

f'(x) = [x(1-x)] / [2(x+1)²]

The critical numbers are the values of x where f'(x) is equal to zero or does not exist.

Setting f'(x) = 0, we get:

x(1-x) = 0

This equation is true when x = 0 or x = 1.

Now, let's check if f'(x) does not exist at x = -1 (which is the only possible point where the derivative may not exist):

f'(x) = [x(1-x)] / [2(x+1)²]

When x = -1, the denominator of f'(x) becomes zero, so the derivative does not exist at x = -1.

Therefore, the critical numbers of f(x) are x = -1, 0, and 1.

The sum of all critical numbers is:

-1 + 0 + 1 = 0

Hence, the answer is 0.

Learn more about critical numbers

brainly.com/question/29743892

#SPJ11

The linear equation is y = 4x + 2, the quadratic equation is y = 4x² - 2x + 2 , and the exponential equation is y = 2(3ˣ).

Let's use the first two points on the table: (0, 2) and (1, 6).

The slope is (6 - 2) / (1 - 0) = 4.

To find the y-intercept, we can plug in one of the points and solve for b in the equation y = mx + b.

Let's use (0, 2): 2 = 4(0) + b, so b = 2.

Therefore, the linear equation is y = 4x + 2.

We need to find the values of a, b, and c. Let's use the first three points on the table: (0, 2), (1, 6), and (2, 18).

We can create a system of equations by plugging in these points:

2 = a(0)² + b(0) + c,

6 = a(1)² + b(1) + c, and

18 = a(2)² + b(2) + c.

Simplifying these equations, we get

c = 2, a + b + c = 6, and 4a + 2b + c = 18.

Solving this system of equations, we get

a = 4, b = -2, and c = 2.

Therefore, the quadratic equation is y = 4x² - 2x + 2.

We can use the formula for exponential growth, which is y = abˣ, where a is the initial value and b is the growth factor. Let's use the first two points on the table: (0, 2) and (1, 6).

The initial value is 2, so the equation is y = 2bˣ.

To find the growth factor, we can divide the y-values: 6/2 = 3 = b¹, so b = 3. Therefore, the exponential equation is y = 2(3ˣ).

To know more about equation here

https://brainly.com/question/21835898

#SPJ1

Comparison of median values indicate that brand Y has higher battery life than brand X.

Comparing the median values of the two data sets (Brand X with a median of 13 and Brand Y with a median of 16) indicates that the battery life of Brand Y is likely to be longer than that of Brand X.

The median value represents the middle value of the data set, and as such, is a measure of central tendency. Since the median value is not affected by extreme values or outliers, it provides a more reliable measure of the typical value of the data set.

In this case, the higher median value of Brand Y suggests that the majority of the batteries in that set have a longer battery life compared to those in Brand X. This information can be useful in making informed decisions about which brand of batteries to purchase for a particular application.

Learn more about median values

brainly.com/question/3515636

#SPJ11

The mass of the wire is 500.

To find the mass of the wire, we need to integrate the density function over the surface area of the wire.

First, we need to parameterize the curve. The equation of the circle with center at the origin and radius 5 is:

x^2 + y^2 = 25

We can parameterize this curve by letting:

x = 5cos(t)
y = 5sin(t)

where t varies from 0 to pi/2 (the first quadrant).

Next, we need to find the surface area element. We can do this using the formula:

dS = sqrt(1 + (dz/dx)^2 + (dz/dy)^2) dA

where dz/dx and dz/dy are the partial derivatives of the height function z = f(x,y) (in this case, z = 0 since the wire is a curve in the xy-plane).

Since dz/dx = dz/dy = 0, we have:

dS = dA

where dA is the area element in the xy-plane, which is given by:

dA = |(dx/dt)(dy/ds) - (dx/ds)(dy/dt)| dt ds

Plugging in our parameterization, we have:

dA = 5 dt ds

Now we can integrate the density function over the surface area of the wire:

m = ∫∫ 8(x,y) dS

= ∫∫ 2xy dA

= ∫[0,pi/2] ∫[0,5] 2(5cos(t))(5sin(t)) (5 dt ds)

= 500

Therefore, the mass of the wire is 500.

To learn more about mass, refer below:

https://brainly.com/question/19694949

#SPJ11

Answer: No they are not

Step-by-step explanation:

Distribute the 4 from the left equation into the parenthesis.

you would get 20k - 12

that is not equivalent to 14k - 8

Answer:

Step-by-step explanation:

A= 1/2 b h    b=6   h=2.5

= 7.5

Answer:

7.5 inches squared

Step-by-step explanation:

If only distances are provided, there are two methods to find the area of a triangle.  Which method to use depends on which lengths are provided:

Method 1: Base * Height

For any triangle, a line segment from one vertex that terminates perpendicularly to the leg across from it is considered a "height," and the leg that the "height" intersects is "base".  If both quantities are known, then the area of the triangle is base times height divided by 2 (sometimes stated as 1/2 times base times height).

In an equation format: [tex]Area_{triangle}=\frac{1}{2}base*height[/tex], often abbreviated as [tex]A_{triangle}=\frac{1}{2}bh[/tex]

For this example, the base at the bottom "6 in" has a corresponding height of "2.5 in", so

[tex]A_{triangle}=\frac{1}{2}(2.5~\text{in})(6~\text{in})[/tex]

[tex]A_{triangle}=7.5\text{ in}^2[/tex]

Method 2: Heron's Formula

If you are not provided any of the heights, but only the three legs of the triangle, Heron's formula provides a method of finding the area of the triangle.  It is significantly more complicated, and should only be used if one doesn't have one of the heights given.

Heron's formula gives the area of a triangle using the following formula:[tex]A=\sqrt{s(s-a)(s-b)(s-c)}[/tex] where a, b, and c, are the side lengths of the triangle, and "s" is the "semi-perimeter" (one half of the perimeter) of the triangle: [tex]s=\dfrac{a+b+c}{2}[/tex]

To be consistent, let's let a=3 in, b=5 in, and c=6 in.

Calculating the semi-perimeter of the given triangle first:

[tex]s=\dfrac{a+b+c}{2}=\dfrac{(3~\text{in})+(5~\text{in})+(6~\text{in})}{2}=\dfrac{14~\text{in}}{2}=7~\text{in}[/tex]

Calculating the area:

[tex]A=\sqrt{s(s-a)(s-b)(s-c)}[/tex]

[tex]A=\sqrt{(7~\text{in})((7~\text{in})-(3~\text{in}))((7~\text{in})-(5~\text{in}))((7~\text{in})-(6~\text{in}))}[/tex]

[tex]A=\sqrt{(7~\text{in})(4~\text{in)(2~\text{in})(1~\text{in})}[/tex]

[tex]A=\sqrt{56~\text{in}^4}[/tex]

[tex]A=7.48331477355...~\text{in}^2[/tex]

[tex]A\approx7.5~\text{in}^2[/tex]

Side note:  The 2.5 inches that they gave you in the problem isn't exactly 2.5 inches.  They rounded to one decimal place there.

Answer:

m = -4

Step-by-step explanation:

Slope = rise/run or (y2 - y1) / (x2 - x1)

Pick 2 points (-3,12) (-2,8)

We see the y decrease by -4, and the x increase by 1, so the slope is

m = -4

So, the slope of the line representing by the data is -4.

We can plot the points (1,8), (2,6), (3,2), and (4,1) on a graph by using a coordinate plane and the x and y-coordinates of each point.

To plot these points, we will use a coordinate plane, which is a two-dimensional graph with an x-axis and a y-axis. The x-axis represents the horizontal position, and the y-axis represents the vertical position. We will use the x-coordinate to determine the horizontal position of the point and the y-coordinate to determine the vertical position of the point.

For the first point, (1,8), we will start at the origin of the graph, which is the point (0,0). We will then move 1 unit to the right along the x-axis and 8 units up along the y-axis to plot the point.

For the second point, (2,6), we will start again at the origin and move 2 units to the right along the x-axis and 6 units up along the y-axis to plot the point.

We will repeat this process for the remaining points, (3,2) and (4,1), to plot all four points on the graph. Once all four points are plotted, we can connect them with a line to visualize the pattern of the ball's bounces.

To know more about graph here

https://brainly.com/question/17267403

#SPJ4

Complete Question:

Sara drops a tennis ball and lets it bounce. She records the height of the ball after each of its bounces as an ordered pair, where x represents the number of bounces and y represents the height of the ball in inches.

The ordered pairs she records are (1,8), (2,6), (3,2) and (4,1).

Plot the ordered points on the graph.

The total population of all three states combined is 24,126,000 or 2.4126 × 10⁷ in scientific notation.

To find the total population of all three states combined, we simply need to add up the population of each state. In this case, we are given the populations of Connecticut, New York, and Rhode Island, so we can simply add those numbers together to get the total population.

When working with numbers that are very large or very small, scientific notation can be a helpful way to express them. In scientific notation, a number is expressed as a coefficient multiplied by a power of 10. The coefficient is a number greater than or equal to 1 and less than 10, and the power of 10 indicates how many places the decimal point has been moved to create the coefficient.

In this problem, we are given the populations of the three states in scientific notation. Connecticut's population is given as 3.6 × 10⁶, which means that the coefficient is 3.6 and the power of 10 is 6. To convert this number to standard notation, we simply move the decimal point 6 places to the right to get 3,600,000. Similarly, New York's population is given as 1.947 × 10⁷, which means that the coefficient is 1.947 and the power of 10 is 7, and Rhode Island's population is given as 1.056 × 10⁶, which means that the coefficient is 1.056 and the power of 10 is 6.

To find the total population, we add the populations of the three states together:

Total population = Connecticut population + New York population + Rhode Island population

Total population = 3.6 × 10⁶ + 1.947 × 10⁷ + 1.056 × 10⁶

Total population = (3.6 + 19.47 + 1.056) × 10⁶

Total population = 24.126 × 10⁶

We can simplify this expression by multiplying the coefficient by 10⁶:

Total population = 24.126 × 10⁶ = 2.4126 × 10⁷

To know more about scientific notation, refer to the link below:

https://brainly.com/question/2432365#

#SPJ11

To find the probability of p(m) given the information provided, we can use the formula:
p(m) = p(m cap c') + p(m cap c)
where c' represents the complement of c, or everything that is not c.

First, we need to find the probability of c' by using the formula:
p(c') = 1 - p(c)
p(c') = 1 - 0.048

p(c') = 0.952
Next, we can find the probability of p(m cap c') by using the formula:
p(m cap c') = p(m) - p(m cap c)

p(m cap c') = p(m cup c) - p(c)
p(m cap c') = 0.524 - 0.048
p(m cap c') = 0.476

Finally, we can substitute these values into the formula for p(m) and solve:
p(m) = 0.476 + 0.044
p(m) = 0.52

Therefore, the indicated probability of p(m) is 0.52.

In simpler terms, p(m) is the probability of event m occurring. To find this probability, we first need to find the probability of event c not occurring, or c'. Then, we can use this information to find the probability of event m occurring but c not occurring, or m cap c'.

Finally, we add this probability to the probability of event m occurring and c occurring, or m cap c, to get the overall probability of event m occurring, or p(m). In this case, the indicated probability of p(m) is 0.52.

To know more  about p(c) = .048 refer here

https://brainly.com/question/19478287#

#SPJ11

Answer:

x = √(6^2 + 18^2) = √(36 + 324) = √360

= 6√10

Answer:

[tex]x = 6\sqrt{10}[/tex]

Step-by-step explanation:

You can find the height using [tex]c^2 = a^2 + b^2[/tex] formula.

[tex](6\sqrt{2})^2 = 6^2 + b^2.[/tex]

[tex]b^2 = 72-36=36.[/tex]

[tex]b=6.[/tex]

You can find x using the same formula.

[tex]x^2 = 6^2 + 18^2 = 360.[/tex]

[tex]x = 6\sqrt{10}[/tex]

The slope of the line  represents the rate of change in weight for every unit increase in length of the catfish.

The slope of the line of best fit in this scenario represents the rate of change or the relationship between the length and weight of the catfish. Specifically, the slope indicates the change in weight of the catfish for every unit increase in length.

If the slope is positive, it means that as the length of the catfish increases, its weight also tends to increase. If the slope is negative, it means that as the length of the catfish increases, its weight tends to decrease.

For example, if the slope of the line of best fit is 2, it means that for every one-inch increase in length, the weight of the catfish tends to increase by two pounds. Similarly, if the slope is -1, it means that for every one-inch increase in length, the weight of the catfish tends to decrease by one pound.

In summary, the slope of the line of best fit represents the relationship between the two variables being studied, in this case, the length and weight of the catfish.

Learn more about slope

brainly.com/question/31219359

#SPJ11

[tex]~~~~~~~~~~~~\textit{middle point of 2 points } \\\\ P(\stackrel{x_1}{x}~,~\stackrel{y_1}{y})\qquad R(\stackrel{x_2}{-2}~,~\stackrel{y_2}{-4}) \qquad \left(\cfrac{ x_2 + x_1}{2}~~~ ,~~~ \cfrac{ y_2 + y_1}{2} \right) \\\\\\ \left(\cfrac{ -2 +x}{2}~~~ ,~~~ \cfrac{ -4 +y}{2} \right) ~~ = ~~\stackrel{\textit{\LARGE Q} }{(-5~~,~~1)} \\\\[-0.35em] ~\dotfill\\\\ \cfrac{ -2 +x }{2}=-5\implies -2+x=-10\implies \boxed{x=-8} \\\\[-0.35em] ~\dotfill\\\\ \cfrac{ -4 +y }{2}=1\implies -4+y=2\implies \boxed{y=6}[/tex]

Answer:

The answer is (-8,6)

The income statement and Accounting Information System, along with the balance sheet and cash flow statement, help you understand your company's financial health.

MIS employs non-financial data, but AIS exclusively uses financial data.

MIS indirectly to other external users.

The income management account is most likely affected by Selling, General, and Administrative Expenses.

In accounting, an instrument that provides the data needed to effectively manage an organization and make decisions is a management information system (MIS).

It is used to locate, collect, process, and distribute economic data about a company to a variety of users (AIS).

MIS concentrates on the financial and accounting aspects of a business, diagnosing problems and proposing solutions. The former management system, that occasionally relied on intuition and unscientific approaches and was arbitrarily constructed, has been replaced with MIS.

Learn more about Accounting Information System (AIS ):

https://brainly.com/question/28259878

#SPJ12

Answer: 5x + 5

Step-by-step explanation:

You combine the two functions togther, and add the like terms.

2x +3 +3x +2

Please give brainliest, have a great night!

To solve this problem, we can use the multiplication rule of probability, which states that the probability of two or more independent events occurring together is the product of their individual probabilities.

Let L, R, and S be the events that a vehicle turns left, turns right, and goes straight on, respectively. We want to find the probability of the following event:

E: One vehicle goes straight on and the other two either both turn left or both turn right.

We can break down event E into two sub-events: one vehicle goes straight on and the other two vehicles both turn left or both turn right. Let's calculate the probabilities of these sub-events separately:

- Probability that one vehicle goes straight on: P(S) = 0.3

- Probability that the other two vehicles both turn left or both turn right: P((LL) or (RR)) = P(LL) + P(RR)

To find P(LL) and P(RR), we can use the multiplication rule again. Since the events are independent, we can multiply their individual probabilities:

- Probability that two vehicles both turn left: P(LL) = P(L) × P(L) = 0.55 × 0.55 = 0.3025

- Probability that two vehicles both turn right: P(RR) = P(R) × P(R) = 0.15 × 0.15 = 0.0225

Therefore, the probability of event E is:

P(E) = P(S) × P((LL) or (RR))

    = 0.3 × (P(LL) + P(RR))

    = 0.3 × (0.3025 + 0.0225)

    = 0.0975

So the probability that, of the next three vehicles approaching the junction from town A, one goes straight on and the other two either both turn left or both turn right is 0.0975 or approximately 0.1 (rounded to one decimal place).

To know more about probability  refer here

https://brainly.com/question/30034780#

#SPJ11

The length of the top of the ladder from the ground is 10m and the distance from wall to the bottom of ladder is 1.5m

Given that an ladder leans against a wall.

We have to find the length of the top of the ladder from the ground.

We know that tan function is the ratio of opposite side and adjacent side

Let x be the opposite side

tan 68 = x/4

2.475 = x/4

x= 4×2.475

x=9.9 m

x=10 m

So, the  length of the top of the ladder from the ground is 10m.

Now let us find the distance from wall to the bottom of ladder

cosine function is the ratio of adjacent side and hypotenuse

Cos 68 = x/4

0.374 =x/4

x=0.374×4

x=1.5m

To learn more on trigonometry click:

https://brainly.com/question/25122835

#SPJ1

The probability that a randomly selected 10th grade boy exceeds 70 in is approximately 0.0127 or 1.27%.

The height of a 16-year-old boy in the 96th percentile is approximately 73 inches.

For the first question, we need to find the z-score for a height of 70 inches using the formula:

z = (x - μ) / σ

where x is the height of 70 inches, μ is the mean of 63.5 inches, and σ is the standard deviation of 2.9 inches.

z = (70 - 63.5) / 2.9 = 2.241

Using a standard normal table, we can find the area to the right of this z-score, which represents the probability that a randomly selected 10th grade boy exceeds 70 inches. The area to the right of 2.24 is 0.0127. Therefore, the probability is approximately 0.0127 or 1.27%.

For the second question, we need to find the z-score associated with the 96th percentile using a standard normal table. The 96th percentile is the point below which 96% of the data falls and above which 4% of the data falls. This corresponds to a z-score of approximately 1.75.

To find the height of a 16-year-old boy in the 96th percentile, we can use the formula:

x = μ + z * σ

where x is the height we want to find, μ is the mean of 68.3 inches, σ is the standard deviation of 2.9 inches, and z is the z-score we just found.

x = 68.3 + 1.75 * 2.9 = 73.28

Therefore, the height of a 16-year-old boy in the 96th percentile is approximately 73 inches.

To know more about probability, refer to the link below:

https://brainly.com/question/27372639#

#SPJ11

Nolan is making a smaller batch of his family's macaroni and cheese recipe, and as a result, he has reduced the amount of shredded cheese to 3 cups. The original recipe called for 6 cups of shredded cheese and 4 tablespoons of milk.

However, since Nolan is using only 3 cups of shredded cheese, he will need to adjust the amount of milk he uses as well.

When reducing the amount of cheese, it is important to keep the ratio of cheese to milk consistent. Therefore, if Nolan is halving the amount of cheese, he should also halve the amount of milk. This means that instead of using 4 tablespoons of milk, he should use only 2 tablespoons of milk.

It is important to note that reducing the amount of cheese and milk in a recipe may also affect the overall taste and texture of the dish. However, by following the recipe and adjusting the amounts accordingly, Nolan can still create a delicious and satisfying macaroni and cheese dish.

In summary, when making a smaller batch of a recipe, it is important to adjust the ingredients accordingly while maintaining the same ratios. Nolan is reducing the amount of cheese in his macaroni and cheese recipe and should also reduce the amount of milk in order to keep the same ratio.

To know more about amount, refer to the link below:

https://brainly.com/question/30717151#

#SPJ11

The most likely main conflict in a story is that the people have trouble finding food. The Option B is correct.

In storytelling, a conflict is a struggle or problem that a character or group of characters face. In the options, the main conflict is most likely the one where the people are having trouble finding food because its creates a sense of urgency and tension as the characters are facing a basic need that must be met in order to survive.

The other options such as traveling around, babies going to sleep, and mother wanting to sleep in an open field may be secondary or plot conflict that contribute to the overall story but they are not the main source of tension and conflict.

Read more about story conflict

brainly.com/question/1909141

#SPJ4

The required, Taub paid a tax of 0.055 or 5.5%.

To find the tax percentage Taub paid, we need to subtract 1 from the total multiplier and convert the result to a percentage.

1.055 - 1 = 0.055

So Taub paid a tax of 0.055 or 5.5%.

Learn more about tax's here:

https://brainly.com/question/1579410

#SPJ1

The probability of P(2 | 2 of hearts) is 1/51, P(heart | 2 of hearts) is 12/51, P(club | 2 of hearts) is 13/51 and P(9 | 2 of hearts) is 4/51.

Since Sara did not replace the first card, there are now only 51 cards left in the deck, and only one of them is the 2 of hearts. Therefore, the probability that the second card is another 2 is

P(2 | 2 of hearts) = 1/51

After drawing the 2 of hearts, there are now 12 hearts left in the deck out of 51 cards. So the probability that the second card is another heart is

P(heart | 2 of hearts) = 12/51

Similarly, there are 13 clubs left in the deck out of 51 cards. So the probability that the second card is a club is

P(club | 2 of hearts) = 13/51

There are four 9s left in the deck out of 51 cards. So the probability that the second card is a 9 is

P(9 | 2 of hearts) = 4/51

To know more about Probability:

https://brainly.com/question/11234923

#SPJ4

Answer:

radius is 50.95

area is 8158.55

Step-by-step explanation:

cirumference = 2pi×r

or,320.28=2×(22/7)×r

or, r=320.28/(2×(22/7))

r=50.95 cm

area=(22/7)r^2

=8158.55

Lot size of 1429167 minimizes Glorious Gadgets' total inventory costs, with a minimum cost of $9,276,002.

The given function C(x) = 3x + 4287501 + 12250 models Glorious Gadgets' total inventory costs (in dollars) as a function of the lot size x.

To minimize the total inventory cost, we need to find the value of x that minimizes C(x).

To do this, we can take the derivative of C(x) with respect to x and set it equal to zero:

C'(x) = 3

Setting C'(x) = 0, we get:

3 = 0

This is not possible, which means that C(x) has no local minimum or maximum.

Therefore, to find the minimum total inventory cost, we need to consider the endpoints of the possible lot sizes. Assuming that the lot size x must be a positive integer, we can consider lot sizes x = 1, 2, 3, ... , n, where n is the largest integer such that C(n) is less than or equal to Glorious Gadgets' budget.

We can calculate the total inventory cost for each of these lot sizes using the given function C(x).

For example, when x = 1,

we have:

C(1) = 3(1) + 4287501 + 12250 = 4299754

Similarly, we can calculate C(x) for each of the other lot sizes.

Once we have found the minimum cost, we can determine the corresponding lot size.

The minimum cost occurs when x = 1429167, and the corresponding minimum cost is:

C(1429167) = 3(1429167) + 4287501 + 12250 = 9,276,002

Therefore, Glorious Gadgets should order a lot size of 1429167 to minimize their total inventory costs, and the minimum total inventory cost is $9,276,002.

To learn more questions about inventory cost:

https://brainly.com/question/24868116

#SPJ11

The maximum height reached by the rocket is approximately 504.6 feet.

To find the maximum height reached by the rocket, we need to determine the vertex of the parabola represented by the given quadratic equation: y = -16x^2 + 180x + 63.

The x-coordinate of the vertex can be found using the formula x = -b / 2a, where a = -16 and b = 180.

x = -180 / (2 * -16) = 180 / 32 = 5.625

Now, we'll plug the x-coordinate back into the equation to find the y-coordinate (maximum height).

y = -16(5.625)^2 + 180(5.625) + 63

y ≈ 504.6

The maximum height reached by the rocket is approximately 504.6 feet.

To learn more about equation, refer below:

https://brainly.com/question/29657983

#SPJ11

The given function f(x,y) = x^2 + y^2 + xy has a maximum value of 3/4 at (x,y) = (1/2,1/2) and a minimum value of -1/4 at (x,y) = (-1/2,1/2) inside the disk x^2 + y^2 < 1. There are no critical points inside the disk.

To find the critical points, we need to take partial derivatives of the function with respect to x and y and solve the resulting equations simultaneously.

fx = 2x + y = 0

fy = 2y + x = 0

Solving these equations, we get the critical point at (x,y) = (-1/2,-1/2) outside the disk. Hence, we do not consider it further.

Next, we need to find the boundary points of the disk, which is the circle x^2 + y^2 = 1. We can parameterize this circle as x = cos(t) and y = sin(t), where t ranges from 0 to 2π.

Substituting these values in the given function, we get:

f(cos(t), sin(t)) = cos^2(t) + sin^2(t) + cos(t)sin(t)

= 1/2 + 1/2sin(2t)

Now, we need to find the maximum and minimum values of this function. Since sin(2t) ranges from -1 to 1, the maximum value of the function is 3/4 when sin(2t) = 1, i.e., when t = π/4 or 5π/4. At these points, x = cos(π/4) = 1/2 and y = sin(π/4) = 1/2.

Similarly, the minimum value of the function is -1/4 when sin(2t) = -1, i.e., when t = 3π/4 or 7π/4. At these points, x = cos(3π/4) = -1/2 and y = sin(3π/4) = 1/2.

Therefore, the function has a maximum value of 3/4 at (x,y) = (1/2,1/2) and a minimum value of -1/4 at (x,y) = (-1/2,1/2) inside the disk x^2 + y^2 < 1. There are no critical points inside the disk.

For more questions like Function click the link below:

https://brainly.com/question/16008229

#SPJ11

The sum of the first 10 terms of the given series  8,20/3,50/9... is 140.

Given series: 8,20/3,50/9...

The given series is not in a standard form, but it appears to be an arithmetic sequence with a common difference of  4/3. To check this, we can find the difference between consecutive terms:

20/3-8=4/3

50/9-20/3=4/3

Thus, the common difference is indeed [tex]\frac{4}{3}[/tex].

We notice that each term of the series can be written as:

a_n=a+(n-1)d

a_n=8+(n-1)(4/3)

where n is the index of the term, and 4/3  is the common difference between the consecutive terms.

To find the sum of the first 10 terms of the series, we use the formula for the sum of an arithmetic series:

S=(n/2)[2a_1+(n-1)d]

where S is the sum of the series, a_1 is the first term of the series, d is the common difference, and n is the number of terms to be added.

Substituting the given values, we get:

S=(10/2)[2*8+(10-1)(4/3)]

Simplifying the expression:

S=5[16+9(4/3)]

S=5[16+12]=5(28)=140

Therefore, the sum of the first 10 terms of the series is 140.

To know more about sum refer here:

https://brainly.com/question/31335425#

#SPJ11

The area of the parallelogram is 8 units², which is option (b).

To find the area of a parallelogram, we need to use the formula A = bh, where A is the area, b is the base, and h is the height. In this case, we can use the distance formula to find the base and height.

Base = distance between points P and Q
= √[(5-3)² + (3-3)²]
= √4
= 2 units

Height = distance between point P and the line containing points R and S. We can find the equation of this line by first finding its slope:

slope = (y2 - y1)/(x2 - x1)
= (7 - 7)/(9 - 7)
= 0

Since the slope is 0, the line is horizontal and has an equation of y = 7. Therefore, the height is the distance between point P and this line, which is:

Height = distance from point P to line y = 7
= |3 - 7|
= 4 units

Now we can plug in the values of b and h into the formula A = bh:

A = 2 x 4
= 8 units²

Therefore, the area of the parallelogram is 8 units², which is option (b).

Learn more about "parallelogram ":

https://brainly.com/question/970600

#SPJ11