A compound has the empirical formula given below. C3H4O3 Which compound represents the molecular formula with a scale factor of 2? A. C6H8O6 B. C2H2O2 C. C3H4O3​

Answer:

9.95 pH

Explanation:

To determine the pH of a sodium fluoride solution, we need to calculate the concentration of the fluoride ion, F⁻, using the dissociation constant expression for sodium fluoride:

Kb = [HF][OH⁻] / [F⁻]

where Kb is the base dissociation constant of sodium fluoride, [HF] is the concentration of hydrogen fluoride, [OH⁻] is the concentration of hydroxide ions, and [F⁻] is the concentration of fluoride ions.

Sodium fluoride is a salt of a weak acid (hydrogen fluoride, HF) and a strong base (sodium hydroxide, NaOH), and so it undergoes hydrolysis in water to produce hydroxide ions and the weak acid HF:

NaF + H₂O → NaOH + HF

The Kb expression for sodium fluoride then becomes:

Kb = [HF][OH⁻] / [NaF]

Since the solution is 0.43 M in sodium fluoride, the concentration of fluoride ions is also 0.43 M. Assuming complete hydrolysis, the concentration of hydroxide ions can be calculated from the Kb expression:

Kb = [HF][OH⁻] / [F⁻]

1.8 x 10⁻¹¹ = x² / 0.43

x = 1.12 x 10⁻⁶ M

The pH of the solution can then be calculated from the concentration of hydroxide ions:

pH = 14 - pOH = 14 - (-log[OH⁻]) = 14 - (-log(1.12 x 10⁻⁶)) = 9.95

Therefore, the pH of the sodium fluoride solution is approximately 9.95.

Around 6.14 x [tex]10^{24}[/tex] g of magnesium bromate has the same mass as 10.00 g of sodium bromite and the same amount of oxygen atoms.

Writing down the chemical formulas for magnesium bromate and sodium bromite is the first step in solving this issue. Next, we must determine the mass of magnesium bromate that has the same amount of oxygen atoms as 10.00 g of sodium bromite using the mole ratio.

The compounds' chemical formulae are as follows:

Bromate of magnesium: Mg (BrO3)2

Bromite of sodium: NaBrO2

The molar mass and Avogadro's formula can be used to determine how many oxygen atoms are present in 10.00 g of sodium bromite.

NaBrO2 has a molar mass of 102.89 g/mol.

10.00 g divided by 102.89 grammes per mole yields 0.097 moles.

The formula for the number of oxygen atoms in 0.097 mol is 0.097 mol x 2 mol O / 1 mol. O = 0.194 mol NaBrO2

In 10.00 g of NaBrO2, there are 1.17 x [tex]10^{23}[/tex] oxygen atoms, which is equal to 0.194 mol x 6.022 x [tex]10^{23}[/tex] molecules/mol.

Mg(BrO3)2 molecules each contain six oxygen atoms.

1.17 x [tex]10^{23}[/tex] O atoms divided by 6 molecules' worth of Mg(BrO3)2 results in 1.95 x [tex]10^{22}[/tex] molecules of Mg(BrO3)2.

1.95 x [tex]10^{22}[/tex] molecules of Mg(BrO3)2 weigh 6.14 x [tex]10^{24}[/tex] g when multiplied by the molecular weight of 314.70.

To learn more about magnesium bromate visit:

brainly.com/question/9171023

#SPJ9

the supraspinatus muscle is the most commonly injured muscle in this situation because it is responsible for initiating shoulder abduction, which is an important movement in the throwing motion.

The solution are as follows :-

1.Sarah's mother most likely strained her trapezius muscle. The trapezius muscle is a large triangular-shaped muscle that runs along the upper back and neck and is responsible for moving the shoulder blades and supporting the arms. When picking up a heavy object such as a baby, the trapezius muscle is activated, and if the muscle is strained or overused, it can cause sharp pain between the shoulder blades. The fact that Sarah's mother experiences this pain only when picking up her baby suggests that the weight of the baby is causing the strain.

2.The most likely type of injury to the baseball pitcher is a rotator cuff injury. The rotator cuff is a group of muscles and tendons that surround the shoulder joint and are responsible for stabilizing and moving the shoulder. Pitchers are at high risk for rotator cuff injuries due to the repetitive and forceful motion of throwing a baseball. The specific muscles that are most likely involved in a rotator cuff injury are the supraspinatus, infraspinatus, teres minor, and subscapularis muscles. However, the supraspinatus muscle is the most commonly injured muscle in this situation because it is responsible for initiating shoulder abduction, which is an important movement in the throwing motion.

To know more about weight visit :-

https://brainly.com/question/86444

#SPJ1

1. 15.78 grams of Cl2 are produced from 45 grams of AuCl3.

2. 15.31 grams of AgCl are produced from 4.75 grams of AlCl3.

3. 3.55 grams of NaOH are needed to produce 25.2 grams of Na2SO4.

4.  34.40 grams of CO2 are produced from 25 grams of O2.

1. To determine how many grams of Cl2 are produced from 45 grams of AuCl3, we need to use the balanced chemical equation for the reaction:

2 AuCl3 + 3 Cl2 → 2 AuCl5

From this equation, we can see that 3 moles of Cl2 are produced for every 2 moles of AuCl3. To calculate the number of moles of AuCl3 in 45 grams, we divide the mass by the molar mass:

45 g AuCl3 x (1 mol AuCl3 / 303.33 g AuCl3) = 0.1482 mol AuCl3

Using the mole ratio from the balanced chemical equation, we can calculate the number of moles of Cl2 produced:

0.1482 mol AuCl3 x (3 mol Cl2 / 2 mol AuCl3) = 0.2223 mol Cl2

Finally, we can convert the number of moles of Cl2 to grams by multiplying by the molar mass:

0.2223 mol Cl2 x 70.906 g/mol = 15.78 g Cl2

Therefore, 15.78 grams of Cl2 are produced from 45 grams of AuCl3.

2. The balanced chemical equation for the reaction between aluminum chloride (AlCl3) and silver nitrate (AgNO3) is:

3 AgNO3 + AlCl3 → 3 AgCl + Al(NO3)3

From this equation, we can see that 3 moles of AgCl are produced for every 1 mole of AlCl3. To calculate the number of moles of AlCl3 in 4.75 grams, we divide the mass by the molar mass:

4.75 g AlCl3 x (1 mol AlCl3 / 133.34 g AlCl3) = 0.0356 mol AlCl3

Using the mole ratio from the balanced chemical equation, we can calculate the number of moles of AgCl produced:

0.0356 mol AlCl3 x (3 mol AgCl / 1 mol AlCl3) = 0.1068 mol AgCl

Finally, we can convert the number of moles of AgCl to grams by multiplying by the molar mass:

0.1068 mol AgCl x 143.32 g/mol = 15.31 g AgCl

Therefore, 15.31 grams of AgCl are produced from 4.75 grams of AlCl3.

3. The balanced chemical equation for the reaction between NaOH and Na2SO4 is:

2 NaOH + Na2SO4 → 2 Na2SO4 + 2 H2O

From the balanced equation, we see that 2 moles of NaOH react with 1 mole of Na2SO4 to produce 2 moles of Na2SO4 and 2 moles of H2O. To calculate the mass of NaOH needed to produce 25.2 grams of Na2SO4, we need to use the molar mass of Na2SO4:

Molar mass of Na2SO4 = 142.04 g/mol

First, we need to calculate the number of moles of Na2SO4 produced from 25.2 grams:

25.2 g Na2SO4 x (1 mol Na2SO4 / 142.04 g Na2SO4) = 0.1774 mol Na2SO4

Since 2 moles of NaOH react with 1 mole of Na2SO4, we need half that amount, or 0.0887 mol NaOH, to react completely with the given amount of Na2SO4. Finally, we can calculate the mass of NaOH needed using its molar mass:

0.0887 mol NaOH x 40.00 g/mol = 3.55 g NaOH

Therefore, 3.55 grams of NaOH are needed to produce 25.2 grams of Na2SO4.

4. To determine the mass of CO2 produced from 25 grams of O2, we need to use the balanced chemical equation for the combustion of carbon:

C + O2 → CO2

From this equation, we can see that 1 mole of O2 reacts with 1 mole of carbon to produce 1 mole of CO2. To calculate the number of moles of O2 in 25 grams, we divide the mass by the molar mass:

25 g O2 x (1 mol O2 / 32.00 g O2) = 0.78125 mol O2

Since the mole ratio of O2 to CO2 is 1:1, we know that 0.78125 moles of CO2 are produced. Finally, we can convert the number of moles of CO2 to grams by multiplying by the molar mass:

0.78125 mol CO2 x 44.01 g/mol = 34.40 g CO2

Therefore, 34.40 grams of CO2 are produced from 25 grams of O2.

learn more about mass here

https://brainly.com/question/24191825

#SPJ1

With one of those pieces of information, we could use the Ideal Gas Law (PV = nRT) to calculate the volume of the gas at STP.

What is STP?

STP stands for Standard Temperature and Pressure. It is defined as a temperature of 0 °C (273.15 K) and a pressure of 1 atmosphere (atm). This is the standard set of conditions used for comparing and measuring gases. At STP, 1 mole of any gas occupies a volume of 22.4 liters.

We need additional information to calculate the volume of the gas in cylinder B at STP. We would need to know either the pressure, volume, and temperature of the gas in cylinder B at its current state or the number of moles of gas in cylinder B.

Learn more about STP from the given link

https://brainly.com/question/2783971

#SPJ1

The compounds arranged in order of increasing percentage of oxygen by mass are C2H4O2, NO2, CO2, H2O, and O2. Hence, the correct option is C2H4O2, NO2, CO2, H2O, and O2.

The percentage of oxygen by mass in each compound can be calculated using their molecular weight and the weight of the oxygen atoms present in the molecule.

C2H4O2: Molecular weight = 60.05 g/mol, 4 oxygen atoms present, so %O = (4 x 16.00 g/mol) / 60.05 g/mol x 100% = 42.63%

NO2: Molecular weight = 46.01 g/mol, 2 oxygen atoms present, so %O = (2 x 16.00 g/mol) / 46.01 g/mol x 100% = 69.57%

CO2: Molecular weight = 44.01 g/mol, 2 oxygen atoms present, so %O = (2 x 16.00 g/mol) / 44.01 g/mol x 100% = 72.73%

O2: Molecular weight = 32.00 g/mol, 2 oxygen atoms present, so %O = (2 x 16.00 g/mol) / 32.00 g/mol x 100% = 100.00%

H2O: Molecular weight = 18.02 g/mol, 1 oxygen atom present, so %O = (1 x 16.00 g/mol) / 18.02 g/mol x 100% = 88.86%

Therefore, the compounds arranged in order of increasing percentage of oxygen by mass are C2H4O2, NO2, CO2, H2O, and O2. Hence, the correct option is C2H4O2, NO2, CO2, H2O, and O2.

learn more about mass here

https://brainly.com/question/19385703

#SPJ1

the concentration of the [tex]HNO_3[/tex] solution is 0.0410M when a 0.105 L sample of an unknown [tex]HNO_3[/tex] solution required 43.1 mL of 0.100 M [tex]Ba(OH)_2[/tex] for complete neutralization.

Given the volume of sample of [tex]HNO_3[/tex] = 0.105L

The concentration of [tex]Ba(OH)_2[/tex]= 0.10M

The volume of solution of [tex]Ba(OH)_2[/tex] = 43.1mL

The concentration of [tex]HNO_3[/tex] be = M1

The reaction is as follows:

[tex]HNO_3 + Ba(OH)_2 -- > Ba(NO_3)_2 + H_2O[/tex]

Since the molar ratio of [tex]HNO_3[/tex] to [tex]Ba(OH)_2[/tex] is 1:1, we can calculate the amount of [tex]HNO_3[/tex] in the sample by multiplying the moles of [tex]Ba(OH)_2[/tex] used to neutralize. Molarity(M) = number of moles(n)/volume of solution(V)

M1V1 = M2V2 such that:

[tex]M1 * 0.105 * 10^3 = 0.10 * 43.1[/tex]

Molarity of [tex]HNO_3[/tex](M1) = (43.1 mL x 0.100 M [tex]Ba(OH)_2[/tex]) / 0.105 L)

Molarity of [tex]HNO_3[/tex](M1) = 0.041 M

To learn more about neutralization click here https://brainly.com/question/14156911

#SPJ1

3.0 mol of [tex]CO_2[/tex] are produced by the process.

To solve this problem, we need to use the balanced equation for the reaction:

[tex]2CO(g) + O_2(g) \rightarrow 2CO_2(g)[/tex]

Every carbon dioxide molecule has a covalent double bond between one carbon and two oxygen atoms, giving it a chemical formula [tex]CO_2[/tex]. Atmospheric [tex]CO_2[/tex]  is the primary source of usable carbon in the carbon cycle.is present in the gaseous state at room temperature and is the main carbon source for life on Earth.

We know that 9.0 L of [tex]O_2[/tex] react with excess CO, so we can use the ideal gas law to calculate the number of moles of [tex]O2[/tex]:

[tex]n =\frac{ PV}{RT}\\n = \frac{(9.0 L)(1.0 atm)}{(0.0821 L .atm/K.mol)(273 K)}[/tex]

[tex]n = 3.0 mol \ O_2[/tex]

Now, we can use the stoichiometric ratio from the balanced equation to calculate the number of moles of [tex]CO_2[/tex] that form during the reaction:

[tex]nCO_2 = (2 mol O_2)(\frac{1 mol CO2}{2 mol O_2})\\\\\nCO2 = 3.0 mol CO_2[/tex]

Therefore, 3.0 mol [tex]CO_2[/tex] (carbon dioxide) form during the reaction.

learn more about Carbon dioxide Refer:brainly.com/question/304955

#SPJ1

Answer:

The correct answer is 1.19 moles Cr

Explanation:

We can use Avogadro's number, which is 6.022 x 10^23 particles (atoms or molecules) per mole, to convert the given number of atoms to moles.

Number of moles = Number of atoms / Avogadro's number

Number of moles = 7.22 x 10^23 / 6.022 x 10^23

Number of moles = 1.199 moles (rounded to three significant figures)

Therefore, the number of moles of chromium is approximately 1.19 moles Cr.

Answer:

Explanation:

To calculate the number of moles of chromium, we need to use Avogadro's number, which is defined as the number of atoms in 12 grams of carbon-12. Avogadro's number is approximately 6.022 x 10^23 atoms per mole.

Given that we have 7.22 x 10^23 atoms of chromium, we can calculate the number of moles of chromium using the following formula:

moles of chromium = number of atoms of chromium / Avogadro's number

moles of chromium = 7.22 x 10^23 / 6.022 x 10^23

moles of chromium ≈ 1.20

Therefore, we have approximately 1.20 moles of chromium.

From a single location on the circular chromosome, DNA is copied in both directions.

The correct option is E.

Binary fission is the process of asexual reproduction in which one organism is divided into two separate ones. An organism's genetic material, or deoxyribonucleic acid (DNA), doubles when it splits into two halves (cytokinesis) through binary fission, with each new species inheriting one copy of the latter.

Bacterial binary fission is the method by which bacteria split their cells. Find out how binary fission functions, including how to make a new cell wall and a copy of a bacterial chromosome. Mitosis and binary fission, two types of asexual reproduction, both entail the division of a parent cell into two identical daughter cells.

To know more about Binary fission visit:

https://brainly.com/question/7639952

#SPJ1

mass of methanal = -350.0 g

This result is still negative, which means that the given information cannot be correct.

We are given a 0.75 molal solution of methanal (also known as formaldehyde) dissolved in water, and we are told that the total mass of the solution is 650.0 g. We need to calculate the mass of methanal in this solution.

Assuming this information, we can proceed with the calculation as follows:

The molar mass of methanal (HCHO) is 30.03 g/mol. A 0.75 molal solution of methanal means that 0.75 moles of methanal are dissolved in 1 kg of water.

First, we need to calculate the mass of water in the solution. We can use the molality formula to do this:

molality = moles of solute / mass of solvent (in kg)

0.75 molal solution means 0.75 moles of methanal are dissolved in 1 kg of water.

Therefore, the amount of water in the solution is:

moles of methanal = 0.75 mol

mass of water = moles of methanal / molality = 0.75 mol / 0.75 mol/kg = 1 kg

Since the total mass of the solution is 650.0 g, the mass of methanal can be found by subtracting the mass of water from the total mass:

mass of methanal = total mass of solution - mass of water

mass of methanal = 650.0 g - 1000 g

mass of methanal = -350.0 g

This result is still negative, which means that the given information cannot be correct.

Answer:

To calculate the molarity of the solution, we first need to find the number of moles of calcium chloride in the solution.

The molar mass of calcium chloride (CaCl2) is 40.08 g/mol (1 calcium atom + 2 chlorine atoms).

The number of moles of calcium chloride can be calculated as:

moles of CaCl2 = mass of CaCl2 / molar mass of CaCl2

moles of CaCl2 = 40.1 g / 40.08 g/mol

moles of CaCl2 = 1.00 mol

Now that we know the number of moles of calcium chloride in the solution, we can calculate the molarity using the following formula:

molarity = moles of solute / volume of solution (in liters)

First, we need to convert the volume of solution from milliliters to liters:

429 mL = 0.429 L

Now we can calculate the molarity:

molarity = 1.00 mol / 0.429 L

molarity = 2.33 M

Therefore, the molarity of the solution is 2.33 M.

Answer:

Water participates both in the dissolution and formation of Earth's materials. The downward flow of water, both in liquid and solid form, shapes landscapes through the erosion, transport, and deposition of sediment. Shoreline waves in the ocean and lakes are powerful agents of erosion.

1.) 4.11 grams of CaC2 will produce 1.67 grams of C2H2 ; 2.) 17.01 grams of Ca(OH)2 will produce 14.74 grams of CaC2.

Process that leads to the chemical transformation of one set of chemical substances to another is called chemical reaction.

Balanced chemical equation for the reaction is:

CaC2 + 2H2O → C2H2 + Ca(OH)2

Molar mass of CaC2 is:

Ca = 40.08 g/mol

C = 12.01 g/mol

2 x H = 2 x 1.01

Total = 64.1 g/mol

So 4.11 g of CaC2 is equal to: n = m/M = 4.11 g / 64.1 g/mol = 0.064 mol

Molar mass of C2H2 is:

2 x C =2 x 12.01

2 x H =2 x 1.01

Total = 26.04 g/mol

So mass of C2H2 produced is:

m = n x M = 0.064 mol x 26.04 g/mol = 1.67 g

Therefore, 4.11 grams of CaC2 will produce 1.67 grams of C2H2.

Molar mass of Ca(OH)2 is:

Ca = 40.08 g/mol

2 x O=2 x 16.00

2 x H=2 x 1.01

Total = 74.10 g/mol

So 17.01 g of Ca(OH)2 is equal to: n = m/M = 17.01 g / 74.10 g/mol = 0.2297 mol

Molar mass of CaC2 is:

Ca = 40.08 g/mol

2 x C=2x12.01

Total = 64.1 g/mol

So the mass of CaC2 produced is:

m = n x M = 0.2297 mol x 64.1 g/mol = 14.74 g

Therefore, 17.01 grams of Ca(OH)2 will produce 14.74 grams of CaC2.

To know more about chemical reaction, refer

https://brainly.com/question/25769000

#SPJ1

The CVS Health brand antacid liquid is more effective at neutralizing stomach acid per dose because it contains more OH− ions, which are more effective at neutralizing stomach acid.

[tex]Al(OH)_3[/tex] and [tex]Mg(OH)_2[/tex] are both alkaline substances that can neutralize stomach acid by reacting with hydrogen ions. [tex]Al(OH)_3[/tex] is more effective at neutralizing stomach acid than [tex]CaCO_3[/tex], since it contains more OH− ions than [tex]CaCO_3[/tex]. Additionally,[tex]Mg(OH)_2[/tex] is more effective at neutralizing stomach acid than [tex]CaCO_3[/tex], as it contains twice as much OH− ions as [tex]CaCO_3[/tex]. Therefore, the CVS Health brand antacid liquid contains more OH− ions per dose than Rolaids Extra Strength, making it more effective at neutralizing stomach acid.

learn more about alkaline Refer:brainly.com/question/30402383

#SPJ1

The solution to the given questions on the various chemical reactions , and the balancing of the equations are given below in the explanation below, for clarity purpose

Redox (reduction-oxidation) reactions involve the transfer of electrons between reactants. In a redox reaction, one reactant undergoes oxidation (loses electrons) while another reactant undergoes reduction (gains electrons). These reactions are important in many biological and industrial processes.

Combustion reactions are exothermic reactions that involve the rapid oxidation of a substance in the presence of oxygen, resulting in the release of energy in the form of heat and light. Common examples of combustion reactions include the burning of fossil fuels such as coal, oil, and natural gas.

A precipitation reaction is a type of double displacement reaction in which two aqueous solutions are mixed, and a solid product (a precipitate) forms. Double displacement reactions involve the exchange of ions between two compounds in solution. Precipitation reactions are often used in chemical analysis to identify the presence of certain ions in a solution.

Decomposition reactions involve the breakdown of a single compound into two or more smaller compounds or elements. These reactions can be initiated by heat, light, or other catalysts. For example, the decomposition of hydrogen peroxide into water and oxygen gas is a common laboratory demonstration of a decomposition reaction.

The solution to the given questions are:

1

a. Redox reaction

b. Combustion reaction

c. Redox reaction

d. Precipitate reaction, double displacement

e. Decomposition reaction

2

a. Synthesis reaction: Mg(s) + I2(s) ⟶ MgI2(s)

b. Single displacement reaction: Ba(s) + 2HBr(aq) ⟶ BaBr2(aq) + H2(g)

c. Single displacement reaction: K(s) + H2O(L) ⟶ KOH(aq) + H2(g)

d. Double displacement reaction: 3H3PO4(aq) + 2CaCl2(aq) ⟶ Ca3(PO4)2(s) + 6HCl(aq)

e. Combustion reaction: C6H12(L) + 9O2(g) ⟶ 6CO2(g) + 6H2O(g)

Learn more about redox reaction here https://brainly.com/question/21851295

#SPJ1

Answer:

1. a. This is a redox reaction because Ca is oxidized from an oxidation state of 0 to +2, while Br2 is reduced from an oxidation state of 0 to -1.

b. This is a combustion reaction because a hydrocarbon (C6H12) reacts with oxygen to produce carbon dioxide and water.

c. This is a redox reaction because C is oxidized from an oxidation state of 0 to +2, while H2O is reduced from an oxidation state of +1 to 0.

d. This is a precipitation reaction and a double displacement reaction. PbSO4 is a solid precipitate that forms, while HNO3 and H2SO4 remain in solution.

e. This is a decomposition reaction because KClO3 decomposes into KCl and O2.

2. a. This is a single displacement reaction. The formula for the product is MgI2. The balanced reaction is: Mg(s) + I2(s) ⟶ MgI2(s)

b. This is a single displacement reaction. The formula for the product is BaBr2. The balanced reaction is: Ba(s) + 2HBr(aq) ⟶ BaBr2(aq) + H2(g)

c. This is a synthesis reaction. The formula for the product is KOH. The balanced reaction is: 2K(s) + 2H2O(l) ⟶ 2KOH(aq) + H2(g)

d. This is a double displacement reaction. The formula for the product is H3PO4 + CaCl2 ⟶ Ca3(PO4)2 + 6HCl. The balanced reaction is: 2H3PO4(aq) + 3CaCl2(aq) ⟶ Ca3(PO4)2(s) + 6HCl(aq)

e. This is a combustion reaction. The formula for the product is CO2 + H2O. The balanced reaction is: C6H12(l) + 9O2(g) ⟶ 6CO2(g) + 6H2O(l)

(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)

Based on the number of electron pairs in a molecule's valence shell, the VSEPR theory may be used to predict a molecule's form. The total number of atoms bound to the centre atom and the total number of lone pairs on the central atom make up the VSEPR number.

The structures of many compounds and polyatomic ions with a central metal atom may also be predicted by the VSEPR model, as can the structures of practically every molecule or polyatomic ion with a central nonmetal atom.

Two electron groups result in an initial digit of 2.

Three electron groups result in an initial digit of 3.

Four electron groups result in an initial digit of 4.

Five electron groups result in an initial digit of 5.

Six electron groups result in an initial digit of 6.

To know more about valence shell visit:-

https://brainly.com/question/2725863

#SPJ1

Answer:

burning fossil fuels, like coal.

Explanation:

Generated greenhouse gases which trap heat in the Earth.

Answer:

The compound composed of Cr³+ ions and SO32- ions is called chromium(III) sulfite.

The formula for this compound can be determined by balancing the charges of the Cr³+ ion and the SO32- ion so that the overall charge of the compound is neutral.

The charge of the Cr³+ ion is +3, while the charge of the SO32- ion is -2. To balance these charges, we need two SO32- ions for every Cr³+ ion:

Cr³+ + 2 SO32- → Cr2(SO3)3

Therefore, the formula for the compound is Cr2(SO3)3.

Answer:

Explanation:

The kinetic energy of an object is directly proportional to its mass and velocity. Therefore, to increase the kinetic energy of the marble, we need to increase either its mass or its velocity, or both. In this case, the student wants to increase the kinetic energy of the marble by increasing its mass.

To determine the optimal mass and size of the third marble, we need to consider the properties of the track and the gravitational potential energy of the marble. The gravitational potential energy of an object is directly proportional to its mass and the height it is raised above the ground. As the marble rolls down the track, it loses potential energy and gains kinetic energy, so the optimal mass of the marble will depend on the height of the track and the desired final speed of the marble.

If the track has a steep incline and the desired final speed of the marble is high, then a marble with a larger mass will have a greater kinetic energy than a marble with a smaller mass. However, if the track has a gentler slope or the desired final speed of the marble is relatively low, then a marble with a smaller mass may be sufficient to achieve the desired kinetic energy.

In terms of size, the third marble should be similar in size to the ceramic and steel marbles in order to fit properly on the track and roll smoothly. The size of the marble will not have a significant impact on its kinetic energy as long as its mass is increased sufficiently.

Therefore, to increase the kinetic energy of the marble, the third marble should be larger and heavier than both the ceramic and steel marbles, but of a similar size to fit properly on the track. The optimal mass and size will depend on the height and slope of the track and the desired final speed of the marble.

a) Al(s) + SnSO4(aq) → six electrons transferred

b) Mg(s) + Fe(NO3)2(aq) → Two electrons transferred

The activity series is a list of metals and nonmetals in order of their relative reactivity. It is a useful tool for predicting the outcome of single displacement reactions and for understanding the behavior of metals and nonmetals in various chemical reactions.

In the activity series, the most reactive metals are listed at the top, while the least reactive metals are listed at the bottom. This means that the metals at the top of the activity series are more likely to lose electrons and undergo oxidation, while the metals at the bottom are less likely to lose electrons and undergo oxidation. Similarly, nonmetals are listed in order of their relative ability to gain electrons and undergo reduction.

Learn more about activity series:https://brainly.com/question/14129976

#SPJ1

The molarity of the Epsom salt solution is 0.271 M.

To find the molarity (M) of the Epsom salt (MgSO4) solution, we need to first calculate the number of moles of MgSO4 present in the given mass of Epsom salt. We can use the formula:

moles = mass / molar mass

where the molar mass of MgSO4 is 120.37 g/mol.

mass of MgSO4 = 75 g

molar mass of MgSO4 = 120.37 g/mol

moles of MgSO4 = 75 g / 120.37 g/mol = 0.6237 mol

Next, we need to calculate the volume of the solution in liters, since molarity is defined as the number of moles of solute per liter of solution:

volume of solution = 2.3 L

Now we can calculate the molarity of the Epsom salt solution:

Molarity = moles of MgSO4 / volume of solution

= 0.6237 mol / 2.3 L

= 0.271 M

Therefore, the molarity of the Epsom salt solution is 0.271 M.

learn more about molarity here

https://brainly.com/question/26873446

#SPJ1

Perimeter is the total length of the boundary of a closed figure. The perimeter of a simple ... We know that the opposite sides of a rectangle are equal.

[tex] \: [/tex]

The retrosynthesis of 3-amino-2-fluoro cyclopentane from cyclopentane involves the oxidation of the cyclopentane to a cyclo-pentanol, followed by a reductive amination with an amine.

Retrosynthesis is the process of retrograde synthesis, or breaking of a molecule into its component parts in order to determine how it was synthesized.

The first step in the synthesis is to functionalize the cyclopentane. It is done by oxidizing the cyclopentane to a cyclo-pentanol using a reagent such as sodium periodate and then reductively aminating the cyclo-pentanol with an amine, such as aniline, to give 3-amino-2-fluoro cyclopentane.

The oxidation of the cyclopentane to a cyclo-pentanol can be done by treating the cyclopentane with sodium periodate. This will oxidize the cyclopentane to a cyclo-pentanol, which will then be reduced with an amine, such as aniline, to form 3-amino-2-fluoro cyclopentane.

Finally, the 3-amino-2-fluoro cyclopentane can be fluorinated using a reagent such as fluoro-borane ([tex]B(C_6F_5)_3[/tex]) to give the desired product.

To learn more about cyclopentane click here https://brainly.com/question/29115552

#SPJ1

The query doesn't include the chemical balance or table you mentioned. In order for me to assist you in finding the answer to your inquiry, kindly supply more details or enclose the necessary chemical equation and table.

Equilibrium constant for the reaction between NH3 and water. Ammonia functions as a base when dissolved in water. Ammonium and hydroxide ions are produced after it takes hydrogen ions from water.

Although ammonia does not naturally include hydroxide ions, when it is dissolved in water, it absorbs hydrogen ions from the water and produces both hydroxide and ammonium ions.

To know more about chemical balance visit:-

https://brainly.com/question/30087623

#SPJ1

5.00mL the equivalence volume in the titration of 25.0 mL of 0.010 0 M methylammonium chloride with 0.050 0 M tetramethylammonium hydroxide.

To find the equivalence volume, we need to first determine the moles of methylammonium chloride (MAC) present in the initial solution:

moles of MAC = (25.0 mL)(0.0100 M) = 0.250 mmol

Since the stoichiometry of the reaction is 1:1 between MAC and tetramethylammonium hydroxide (TMAH), the equivalence point occurs when 0.250 mmol of TMAH has been added:

moles of TMAH = (0.250 mmol)/(1000 mL/L) = 0.000250 mol

Now we can calculate the volume of TMAH required to reach the equivalence point:

0.000250 mol / 0.050 0 M = 5.00 mL

Therefore, the equivalence volume is 5.00 mL.

To calculate the pH at different points in the titration, we can use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

At Vo=0, we have only MAC present, so [A-] = 0 and [HA] = 0.0100 M. Therefore:

pH = 10.645 + log(0.000/0.0100) = 10.645

At Vo=2.50 mL, we have added some TMAH, but have not yet reached the equivalence point. We can calculate the concentrations of the acid and conjugate base using the stoichiometry of the reaction and the amount of TMAH added:

moles of TMAH added = (2.50 mL)(0.050 0 M) = 0.000125 mol

moles of MAC remaining = 0.250 mmol - 0.000125 mol = 0.249875 mol

moles of MAC converted to MAC+ = 0.000125 mol

moles of MAC+ = 0.249875 mol

Now we can calculate the concentrations of the acid and conjugate base:

[HA] = (0.249875 mol / 0.0250 L) = 0.009995 M

[A-] = (0.000125 mol / 0.0275 L) = 0.00455 M

Using the Henderson-Hasselbalch equation:

pH = 10.645 + log(0.00455/0.009995) = 10.073

Similarly, we can calculate the pH at Vo=5.00 mL and Vo=10.00 mL:

At Vo=5.00 mL:

moles of TMAH added = (5.00 mL)(0.050 0 M) = 0.000250 mol

moles of MAC remaining = 0.250 mmol - 0.000250 mol = 0.249750 mol

moles of MAC converted to MAC+ = 0.000250 mol

moles of MAC+ = 0.249750 mol

[HA] = (0.249750 mol / 0.0250 L) = 0.009990 M

[A-] = (0.000250 mol / 0.0300 L) = 0.00833 M

pH = 10.645 + log(0.00833/0.009990) = 9.899

At Vo=10.00 mL:

moles of TMAH added = (10.00 mL)(0.050 0 M) = 0.000500 mol

moles of MAC remaining = 0.250 mmol - 0.000500 mol = 0.

To learn more about methylammonium chloride visit;

https://brainly.com/question/31166333

#SPJ4

An external anatomical feature called the beak, bill, or rostrum is usually present in birds but can also be seen in turtles, non-avian dinosaurs, a few mammals, and other animals.

These are frequent birds in parks, forests, cities, and rural settings all over the eastern and southeastern United States. Red can be seen on the rear of the head and at the base of the bill in female red-bellied woodpeckers.

The parrot is a lovely bird. It has long green feathered tail, lovely green wings, and silky green feathers covering its body. The ruby beak of the parrot is its most alluring characteristic.

To know more about anatomical feature visit:-

brainly.com/question/27009857

#SPJ1