DHCP traffic is forwarded on UDP ports 67 (server) and 68. (client). Using these ports, DHCP relay agents transmit DHCP messages from the client to the server.
When does an organization's IT department deploy IP addresses for employee workstations using DHCP?A business manages the IP address distribution for employee workstations using DHCP. In order to facilitate DHCP requests from workstations, the IT department sets numerous DHCP servers in the data centre and makes use of DHCP relay agents.
What is the name of the DHCP process that can give a client machine an IP address?DHCP. DHCP is a mechanism that uses the network to automatically allocate TCP/IP addressing information to workstations (see IETF draught standard RFC 2131, 2132, and 2133).
To know more about DHCP visit:-
https://brainly.com/question/10097408
#SPJ1
a set of switches is being connected in a lan topology. which stp bridge priority value will make it least likely for the switch to be selected as the root?
In a LAN topology, the Spanning Tree Protocol (STP) is used to prevent loops and ensure a loop-free path for data traffic.
What happens in STP?In STP, the switch with the lowest bridge priority value is elected as the root bridge, which serves as the reference point for all other switches in the network.
To make it least likely for a switch to be selected as the root, it should have the highest bridge priority value. By default, all switches have a bridge priority value of 32768, and the lower the value, the higher the priority.
Therefore, assigning a higher bridge priority value to a switch will make it less likely to be selected as the root.
Read more about LAN topology here:
https://brainly.com/question/30255438
#SPJ1
please help Which of the following statements best explains how people may be heard by means of the Internet?
-All information on the Internet is freely accessible to everyone.
-Some information on the Internet is restricted, and some is available only to a specific audience.
-Some information on the Internet is restricted, though typically only to minors.
-All information on the Internet is accessible to everyone, though some of it must be purchased.
Answer:
The statement that best explains how people may be heard by means of the Internet is "Some information on the Internet is restricted, and some is available only to a specific audience." While it is true that there is a lot of freely accessible information on the Internet, there is also a significant amount of information that is restricted and only available to certain audiences. This can include things like password-protected websites, subscription-based content, or content that is restricted to certain geographic regions. Additionally, there are laws and regulations in place to protect minors from accessing certain types of content on the Internet. Therefore, the most accurate statement is that the Internet contains both freely accessible information as well as restricted information that is only available to specific audiences.
Mark me as brainliest!
in a failover cluster, what are the options for configuring the quorum model? (choose all that apply.)
There are three options for configuring the quorum model in a failover cluster: Node Majority, Node and Disk Majority, and Node and File Share Majority. So. the correct option is all of these.
In a failover cluster, there are several options for configuring the quorum model. These include:
Node Majority: This quorum model uses a majority of the cluster nodes, so at least half of the nodes must be online and functional for the cluster to stay up.
Node and Disk Majority: This quorum model uses a combination of cluster nodes and disks. All the nodes and a majority of the disks must be online for the cluster to stay up.
Node and File Share Majority: This quorum model uses a combination of cluster nodes and a designated file share witness. All the nodes and the file share must be available for the cluster to stay up. All of these options require a majority of nodes to be online and functional in order for the cluster to stay up.
So, the correct option is All of these as Node Majority, Node and Disk Majority, and Node and File Share Majority are required for configuring the quorum model.
You can learn more about the quorum model at: brainly.com/question/13164289
#SPJ11
when choosing the location to create resources in the cloud, what is the best location for the resources? [choose all that apply]
Closest to end users, Closest to existing resources, Lowest latency, Lowest cost.
Cloud storage and resourcesThe best location for cloud resources depends on a variety of factors, including data residency requirements, latency, cost, and performance. Some of the most popular cloud regions include the US East (Virginia), US West (Oregon), Europe (Ireland), and Asia Pacific (Singapore).
Additionally, many cloud providers offer multiple regional availability zones within each region to provide increased redundancy and fault tolerance.
Learn more about Cloud storage here:
https://brainly.com/question/11320348
#SPJ1
objects that are stored in a collection should contain implementation details of the underlying structure. group of answer choices true false
True. Objects that are stored in a collection should contain the implementation details of the underlying structure, as the structure defines how the data is organized and stored. This allows the user to access and manipulate the data stored in the collection with ease.
For example, an array is a type of collection, and its underlying structure is the array itself, which consists of elements that can be accessed and modified through indexing. An array is a data structure that stores data in an indexed, linear fashion, making it easy to manipulate and access the stored data. Similarly, a linked list is a collection, and its underlying structure is a linked list node, which consists of a data element and a reference to the next node in the list.
By understanding the underlying structure of the collection, users can easily access and manipulate the data stored in it. For example, an array can be easily traversed by looping through the indices of the array, while a linked list can be easily traversed by looping through the nodes in the list.
In conclusion, objects that are stored in a collection should contain the implementation details of the underlying structure, as it defines how the data is organized and stored, and understanding this structure makes it easier to access and manipulate the data stored in the collection.
You can learn more about the underlying structure at: brainly.com/question/30614560
#SPJ11
what is the name of the industry program (and icon) that shows when a digital ad has been targeted using prior web browsing behavior? group of answer choices adchoices adblocker retargeting optout
When interest-based advertising data is being gathered or used, companies participating in the self-regulatory scheme are required to display the AdChoices icon to alert consumers.
What is meant by self-regulatory scheme?Rather of being governed by external bodies or laws, self-regulatory systems, organisations, or activities are managed by the individuals who participate in them. It takes the agreement of all parties involved for a self-regulatory system to function. Advanced Learner's Collins COBUILD Dictionary. 'self-regulatory'The ability to control oneself first develops in infants. Nonetheless, it continues to develop well into adulthood. It develops mainly during the toddler and preschool years. Babies, for instance, might suck their fingers for solace or turn away from their carers if they need a break from their attention or are feeling tired. Goal-setting, self-monitoring, effective self-instruction or self-talk, and self-reinforcement are the four fundamental self-regulation techniques that all students should be able to employ.To learn more about self-regulatory scheme, refer to:
https://brainly.com/question/30209139
why is managing a typical large network in today's current network environment a labor-intensive and error-prone effort?
Managing a typical large network in today's current network environment is a labor-intensive and error-prone effort due to several reasons. A typical large network is a network that includes several interconnected components such as servers, workstations, routers, switches, firewalls, and other network devices.
The primary reasons behind the complexity of managing a large network are:
Configuration Management: Configuring a large network is an enormous task that can take a lot of time, effort, and resources. Even a simple mistake in the configuration process can create a significant issue in the network. For instance, configuring an incorrect subnet mask can result in incorrect routing and even network failure.
Network Monitoring: Monitoring a large network is a time-consuming task that requires constant attention to identify and troubleshoot potential issues. It involves monitoring various parameters such as bandwidth, network latency, and network performance, among others. Any error or issue can cause significant problems such as network downtime and application failures.
Security Management: Securing a large network is one of the most critical aspects of network management. It involves several security measures such as firewalls, intrusion detection systems, and antivirus software, among others. Implementing security measures can be challenging in a large network due to the sheer number of devices and users.
Maintenance: Large networks require regular maintenance, such as software updates and hardware upgrades. Maintenance can be costly, and the process can result in network downtime if not adequately planned and executed.
These are the reasons why managing a typical large network in today's current network environment is a labor-intensive and error-prone effort.
To learn more about the large network:https://brainly.com/question/8118353
#SPJ11
Joel wants to find a specific webpage containing the words "The quick brown fox" in the same sequence.Which of the following should he use as his search query to make this process fastest?
A) 'The quick brown fox'
B) "The quick brown fox"
C) |The quick brown fox|
D) *The quick brown fox*
The correct search query for Joel to use in order to find a specific webpage containing the words "The quick brown fox" in the same sequence would be B) "The quick brown fox".
Using quotation marks around the phrase "The quick brown fox" will tell the search engine to search for those words in that exact order, with no other words between them. This will help Joel to more quickly find the specific webpage he is looking for, as it will reduce the number of irrelevant search results that the search engine returns.
Option A) 'The quick brown fox' and option D) The quick brown fox use different types of quotation marks or wildcards, which may not produce the desired results. Option C) |The quick brown fox| uses vertical bars instead of quotation marks, which is not a standard syntax for specifying a phrase in most search engines.
Thus, option B is the correct answer.
You can learn more about search query at
https://brainly.com/question/3928184
#SPJ11
have you chosen to make a backup copy of your computer system? in the space below, explain why or why not. what steps did you take (or will you take in the future) to research and implement your method?
My computer system has a backup copy, which is true. Protecting my data from device malfunction or online threats is crucial. I performed my due diligence before choosing a dependable backup programme.
....according to its instructions, and kept the backup in a safe place. I can easily recover my system and files from the backup in the event of a data loss incident. In order to guarantee that your data is safe and recoverable in the event of any unforeseen circumstances, you must make a backup copy of your computer system. I did my homework, picked a backup programme that suited my needs, and carefully followed its directions. To avoid any illegal access, I also took sure to keep the backup in a safe place. Having a backup strategy in place allows me to rest easy knowing that my data is safe and simple to restore.
learn more about computer system here:
https://brainly.com/question/30146762
#SPJ4
true or flase? if a user specifies a url address that ends with a directory name, then the web server will automatically look for a file named index.html
True. If a user specifies a url address that ends with a directory name, then the web server will automatically look for a file named index.html. This is a typical convention, and it helps to make the website more user-friendly.
What is a URL?
A Uniform Resource Locator (URL) is a web address. It is the location of a specific webpage on the internet. The URL specifies the server and directory that the file is stored in so that it may be retrieved. When you type a URL into a web browser, it takes you to the page you want to see.What is a Web Server?
A web server is a computer program that serves static or dynamic HTML pages to clients over the internet. A web server's primary responsibility is to keep web pages and other content on behalf of users so that they may be retrieved as required. It can also handle HTTP requests from a browser and send data back to it.What is a Directory?
A directory is a file that contains a list of other files and directories.
It's essentially a record-keeping mechanism that aids in the organization of files.
Directories are hierarchical, with each level being its own directory.
Directories may contain files or other directories. When the user specifies a url address that ends with a directory name, the web server will automatically look for a file named index.html.
To know more about web server: https://brainly.com/question/26281028
#SPJ11
Consider the following partial class definitions. public class Rodent [ // methods not shown) public class Rat extends Rodent / methods not shown public class Mouse extends Rodent U// more info ] public class LabRat extends Rat (/l methods not shown] Which of the following declarations would not cause a compile time error? LabRat labRat new Rat): Rat rat - new Rodent0: Rodent rodent - new LabRat0:
The declaration that would cause a compile-time error is LabRat labRat = new Rat();
Because you cannot assign a superclass instance to a subclass reference. Since Rat is a subclass of Rodent and LabRat is a subclass of Rat, you can assign an instance of LabRat to a Rat reference or a Rodent reference, but not vice versa.
The correct declarations are:
LabRat labRat = new LabRat();
This declaration creates an instance of the LabRat class and assigns it to a LabRat reference. This is valid because the LabRat class is the type of object being created.Rat rat = new LabRat();
This declaration creates an instance of the LabRat class and assigns it to a Rat reference. This is also valid because LabRat is a subclass of Rat, and therefore, an instance of LabRat can be assigned to a reference of the type Rat.Rodent rodent = new LabRat();
This declaration creates an instance of the LabRat class and assigns it to a Rodent reference. This is also valid because LabRat is a subclass of Rodent, and therefore, an instance of LabRat can be assigned to a reference of the type Rodent.These declarations create instances of LabRat, which is a subclass of Rat and Rodent, and assign them to the appropriate reference types.
To get a similar answer on Rodent:
https://brainly.com/question/30003119
#SPJ11
when running a job which includes a data set with insufficient directory space, which data set type will dynamically create more directory space as needed?
The Generation Data Group data set type dynamically generates more directory space as necessary (GDG). GDGs are a specific kind of data collection used in IBM mainframe systems that support automatic.
What is the maximum storage capacity that the IBM z14 can support?A z14 can each contain 32 TB of RAM, which is three times as much as a z13. Data-in-memory applications and new workloads can be supported by the extra capacity.
Which Z OS data set has read-only applications that can be shared by system users?Pageable LPA is loaded with members from LPALIB, LPALSTxx, or PROGxx (PLPA). Both read-only reenterable user applications chosen by an installation that can be shared and read-only system programme modules are included in these libraries.
To know more about Data visit:-
https://brainly.com/question/11941925
#SPJ1
In basketball a ___ occurs when a player holding the ball keeps one foot at a point of contact with the floor while stepping in any direction.
In basketball, a pivot occurs when a player holding the ball keeps one foot at a point of contact with the floor while stepping in any direction.
A pivot in basketball is when an offensive player holding the ball has one foot firmly planted on the floor while the other foot is allowed to move one step in any direction without lifting the pivot foot. The pivot foot cannot leave the floor, except to pass or shoot the ball. The pivot foot can also move, but it must remain in contact with the floor at all times and cannot change its location until the ball is released.
Learn more about pivot visit:
https://brainly.com/question/31261482
#SPJ11
10. give rgb values for the following colors: a. black b. white c. a dark shade of gray d. a dark shade of blue e. red
The RGB values for the following colors are a. Black - R: 0, G: 0, B: 0 b. White - R: 255, G: 255, B: 255 c. A dark shade of gray - R: 85, G: 85, B: 85 d. A dark shade of blue - R: 0, G: 0, B: 128, and e. Red - R: 255, G: 0, B: 0
RGB stands for Red, Green, and Blue, and is an additive color system in which each color is represented by a combination of these three primary colors. By combining the three primary colors in different combinations, it is possible to create an infinite range of colors. Black is the absence of all color, which is why all of its RGB values are 0. White, conversely, is the combination of all colors, and hence has RGB values of 255 for each of the three primary colors.
A dark shade of gray is achieved by setting the RGB values to a similar value (in this case, 85) for each of the three primary colors. A dark shade of blue is achieved by setting the Red and Green values to 0 and the Blue value to 128. Finally, the Red color is achieved by setting the Red value to 255 and the Green and Blue values to 0.
By combining the values of Red, Green, and Blue, it is possible to create any color imaginably.
You can learn more about RGB values at: brainly.com/question/19262252
#SPJ11
my object in blender has multiple materials and i am trying to only edit a specific one how do i switch between materials in uv editing
Answer: I hope this helps!
Explanation:
To switch between materials in UV editing mode in Blender, you can follow these steps:
Select the object you want to edit in the 3D viewport.
Switch to Edit Mode by pressing the Tab key.
In the Properties panel on the right-hand side of the screen, click the Materials tab (represented by a sphere icon).
Under the Material List section, you'll see a list of all the materials assigned to the selected object.
Click on the material you want to edit to select it. The UV editor will automatically update to show the UV layout for the selected material.
You can now edit the UVs for the selected material.
Note that you can also switch between materials using the dropdown menu at the top of the UV editor window. This menu lists all the materials assigned to the object, and you can select the material you want to edit from this menu.
I hope this helps!
what would the where clause look like in a select query that selects fields from the taskmasterlist, projectlineitems, and projects tables?
The task master list, project line items, and projects tables are queried to retrieve the task name, project name, start date, and finish date. Only tasks and projects are included in the results once.
In Microsoft Project, how can I choose the project start date?Click Project Information from the Project menu. If your task's actual start date is off, click Update Tasks after selecting the task and choosing Tracking from the Tools menu. Change the date in the Start box under Actual.
CHOOSE the task name, the project name, the start and end dates for the task.
PROJECTLINE ITEMS FROM taskmasterlist t JOIN pli ON Task ID equals PLI Task ID
JUST JOIN PROJECTS p Project ID P equals Project ID PL
WHERE pli.end date > NOW AND p.status = "Active" ()
To know more about project line visit:-
https://brainly.com/question/30891982
#SPJ1
which feature is found on almost every website to assist you with locating information? group of answer choices navigation network topology packet none of the above previousnext
The feature that is found on almost every website to assist you with locating information is navigation.
Website navigation is the collection of components (e.g., menus, links, buttons, search bars, and other graphical elements) that visitors utilize to access and navigate a website's sections and pages.
A website's navigation scheme serves as a road map that helps visitors quickly identify the site's sections and pages. It assists users in finding the information they require on a website. Navigation is essential because it aids in the organization and structure of the website's information.
The structure of the navigation system of a website should be simple, and user-friendly, and enable visitors to get to their desired page with ease. As a result, navigation is a critical component of website design.
You can learn more about Website navigation at: brainly.com/question/28270065
#SPJ11
Word indicates the size of the table by ____ at the top of the grid when dragging the pointer across a selection
When dragging the pointer across a selection in Word, the size of the table is indicated by a highlight box at the top of the grid.
The box shows the number of rows and columns that are being selected as the pointer moves over the cells. Once the desired size of the table is highlighted, the user can release the mouse button to create the table with the selected dimensions. This feature is useful for creating tables with specific sizes quickly and accurately. Additionally, Word provides options to adjust the size of the table after it has been created, such as adding or removing rows and columns or changing the width and height of individual cells.
Find out more about Words
brainly.com/question/14905545
#SPJ4
Identify the correct MLA citation for a work in an anthology
The correct MLA citation for a work in an anthology includes the author's name, the title of the work in quotation marks, the title of the anthology in italics, edited by the editor's name, the publisher, the publication year, and the page range of the work.
The general format is:
Last name, First name. "Title of Work." Title of Anthology, edited by Editor's First and Last Name, Publisher, Year of publication, Page numbers of the work.
For example:
Smith, John. "The Art of Writing." Writing in the 21st Century: A Guidebook, edited by Jane Doe, Oxford University Press, 2021, pp. 57-68.
Find out more about MLA citation
brainly.com/question/11255223
#SPJ4
Write a program that reads the content of a text file called text.txt. the program should create a dictionary in which the keys are individual words found in the file and the values are the amount of times the word appears in the file. For example, if the word 'the' appears in the file 128 times, the dictionary would contain an element with the key as 'the' and the value as 128. Write in Python
Answer:
python
Copy code
# Open the text file for reading
with open('text.txt', 'r') as file:
# Initialize an empty dictionary to store word counts
word_counts = {}
# Loop through each line in the file
for line in file:
# Split the line into individual words
words = line.split()
# Loop through each word in the line
for word in words:
# Remove any punctuation from the word
word = word.strip('.,;:?!')
# Convert the word to lowercase
word = word.lower()
# If the word is already in the dictionary, increment its count
if word in word_counts:
word_counts[word] += 1
# If the word is not yet in the dictionary, add it with a count of 1
else:
word_counts[word] = 1
# Print the resulting word count dictionary
print(word_counts)
Explanation:
This code uses the open() function to open the "text.txt" file for reading, and then reads each line of the file using a for loop. Each line is split into individual words using the split() method, and then each word is cleaned up by removing any punctuation and converting it to lowercase. The code then adds each word to a dictionary and counts the number of occurrences of each word. Finally, the resulting dictionary of word counts is printed to the console.
help don't know the answer
Answer:
B. reviews and record keeping
Explanation:
if you want to create a click-to-call feature in your mobile site for smartphone users, which protocol should you use to create a phone link
The protocol you should use to create a click-to-call feature for smartphone users on a mobile site is called tel.
The tel protocol is used to create a link on a web page that will trigger a phone call when tapped or clicked on by a user. When a user clicks on the tel: link, their phone will prompt them to dial a specific phone number. To create a tel: link, you need to include the phone number in the link, like this: 555-123-4567. This link will create a click-to-call feature that will initiate a phone call to the number when clicked. By using the tel: protocol, you can make it easy for mobile users to contact you with a simple tap of the screen.
You can learn more about protocol at: brainly.com/question/27581708
#SPJ11
which property would you use to get the node that contains the content for an element? group of answer choices nextchild textnode firstchild nextnode
The property that would be used to retrieve the node that contains the content for an element in JavaScript is "textnode". The correct answer B.
A text node represents the text content of an element and can be accessed using the "childNodes" property of the parent element. The other options, "nextchild", "firstchild", and "nextnode", do not specifically refer to the node that contains the content for an element.
In JavaScript, every HTML element in a document has a childNodes property that contains all of its child nodes, including TextNode objects, which represent the text content of the element.
Learn more about the node:
https://brainly.com/question/12974434
#SPJ11
Which of the following is not an input device?a. Keyboard b. Monitor c. Digitiser d. Scanner
From the option provided, monitor is not an input device. Option (B) "monotor" is the correct answer.
A monitor is an output device, as it displays visual output from the computer.
a) Keyboard is an input device that allows users to input text and commands.
c) Digitizer is an input device that allows users to input drawings, sketches, or handwriting.
d) Scanner is an input device that allows users to input physical documents or images into digital format.
In summary, input devices are used to input data and commands into the computer system, while output devices are used to display or output the processed data to the user.
Therefore, the correct answer is b. Monitor, as it is an output device.
You can learn more about input devices at
https://brainly.com/question/20938697
#SPJ11
a function includes two parts: the name of the function and the select one: a. argument. b. location. c. size. d. format.
The function includes two parts: the name of the function and the argument. Option a is correct.
The argument is an expression that provides input to the function. It can be a variable, a literal value, or a combination of the two. The argument can determine the size, location, or format of the output of the function.
For example, a function can take two arguments: the width and height of a rectangle. These arguments can be used to determine the size of the rectangle when the function is executed. Alternatively, the arguments could be used to specify the location of the rectangle on the page. The format argument could determine the color of the rectangle.
In summary, a function includes two parts: the name of the function and the argument. The argument is an expression that provides input to the function and can determine the size, location, or format of the output of the function.
You can learn more about arguments at: brainly.com/question/27100677
#SPJ11
true or false: thanks to the internet, the typical american watches more news today than in the 1970s.
True. Thanks to the internet, the typical American watches more news today than in the 1970s because the internet has drastically changed the way people access and consume news from multiple sources.
Before the internet, people mainly accessed news through television and newspapers. Today, people can access news from a variety of sources, such as television, newspapers, websites, and social media. This has led to an increase in the amount of news that the typical American watches.
The internet has made news more accessible. People can access news from a variety of sources with just a few clicks, instead of having to rely on newspapers or watching the news on television. This has enabled people to stay updated on current events more quickly and efficiently.
The internet has also enabled the rise of social media, which has made it easier for people to access news from different sources and form their own opinions. In addition, the internet has made it easier for people to watch more news than they did in the 1970s. There are more media outlets that offer online streaming services, allowing people to watch news anytime, anywhere.
Overall, the internet has increased the amount of news that the typical American watches today compared to the 1970s. With just a few clicks, people can access news from multiple sources, which has led to an increase in the amount of news that the typical American watches.
You can learn more about the internet at: brainly.com/question/21565588
#SPJ11
given the 150.25.0.0 network, how many bits need to be borrowed in order to accommodate 325 subnets?
In order to accommodate 325 subnets, you need to borrow 9 bits from the 150.25.0.0 network. This will give you a total of 512 subnets.
To figure out how many bits need to be borrowed, you use the formula [tex]2^n[/tex], where n is the number of bits you need to borrow. In this case, n = 9, since [tex]2^9 = 512[/tex]. To accommodate 325 subnets, 9 bits need to be borrowed from the host portion of the IP address to subnet the given 150.25.0.0 network.
The formula used for determining the number of bits needed to accommodate the given number of subnets is:
bits = log2(subnets)rounded up to the nearest integer.
The calculation will be: bits = log2(325)bits = 8.3567 rounded up to the nearest integer = 9
Hence, 9 bits need to be borrowed from the host portion of the IP address to subnet the given 150.25.0.0 network.
Learn more about subnets here:
https://brainly.com/question/29557245
#SPJ11
Which of the following is known as a network virus?a. TARb. Wormc. Remote exploitation virus (REV)d. C&C
The network virus is called B: Worm.
A network virus is a type of malicious software that spreads through a computer network by replicating itself onto other computers. The worm is a specific type of network virus that spreads by exploiting vulnerabilities in computer systems and network protocols. Once a worm infects a computer, it can replicate itself and spread to other computers on the network without any user interaction.This makes it particularly dangerous and difficult to detect and remove.
Worms can cause widespread damage by consuming network bandwidth, deleting files, stealing sensitive data, or launching other attacks. To prevent worm infections, it is essential to implement network security measures, such as firewalls and intrusion detection systems, and keep software up to date with the latest security patches.
You can learn more about Worm at
https://brainly.com/question/30001588
#SPJ11
which protocol should you use to create a link in your mobile site that will allow smartphone users to send a text message
To create a link in your mobile site that will allow smartphone users to send a text message, you should use the SMS (Short Message Service) protocol.
SMS is an industry-standard protocol that enables the sending of text messages between devices. SMS is built on top of GSM (Global System for Mobile Communications) and allows for messages to be sent and received quickly and securely. To use the SMS protocol, you'll need to create an SMS URL on your mobile site. This URL will contain the phone number that you'd like the user to send a message to and can also include a message that will be pre-filled in the text box for the user. Once the user clicks on the URL, their device will open the messaging app with the pre-filled information ready for the user to send.
You can learn more about text messaging at: brainly.com/question/2532297
#SPJ11
in this book, we use the terms ethernet and 802.3 interchangeably. group of answer choices true false
This statement that Ethernet and 802.3 are terms that can be used interchangeably is true because both refer to the same type of network technology and offer reliable data transmission.
Ethernet, which stands for "Ethernet Local Area Network," is a standard for LANs or local area networks. 802.3 is a subset of the Ethernet standard that is often referred to as the IEEE 802.3 standard. It defines a standard set of rules for transmitting data on a LAN.
Both Ethernet and 802.3 are used for LANs that use twisted-pair or fiber-optic cabling to connect computers, printers, and other network devices. They are also used to connect computers to routers, switches, and other network hardware. Ethernet and 802.3 both offer high-speed data transfer rates and reliable data transmission.
You can learn more about Ethernet at: brainly.com/question/14622272
#SPJ11