A chemical engineer is studying the effect of temperature and stirring rate on the yield of a certain product. The process is run 16 times, at the settings indicated in the following table. The units for yield are percent of a theoretical maximum.
Temperature (deg. C) Stirring Rate (rpm) Yield (%)
110 30 70.27
110 40 74.95
110 50 77.91
110 60 82.69
121 30 73.43
121 40 73.14
121 50 78.27
121 60 74.89
132 30 69.07
132 40 70.83
132 50 79.18
132 60 78.1
143 30 73.71
143 40 77.7
143 50 74.31
143 60 80.99
a. Compute the correlation between temperature and yield, between stirring rate and yield, and between temperature and stirring rate.
b. Do these data provide good evidence that increasing the temperature causes the yield to increase, within the range of the data? Or might the result be due to confounding? Explain.
c. Do these data provide good evidence that increasing the stirring rate causes the yield to increase, within the range of the data? Or might the result be due to confounding? Explain.

Answer:

a)  15, 18, 27, 48, 52, 86, 103

b)  Minimum number = 15

c)  Maximum number = 103

d)  Median = 48

e)  First quartile = 18

f)  Third quartile = 86

g)  Interquartile range = 68

Step-by-step explanation:

To write the data from least to greatest, arrange the numbers in ascending order:

[tex]\hrulefill[/tex]

The minimum number in a set of data is the smallest value.

Therefore, the minimum number of animals is 15.

[tex]\hrulefill[/tex]

The maximum number in a set of data is the greatest value.

Therefore, the maximum number of animals is 103.

[tex]\hrulefill[/tex]

The median of a set of data is the middle value when all data values are placed in order of size.  

[tex]\begin{array}{ccccccc}\sf 15, &\sf 18, &\sf 27, &\sf 48, &\sf 52, &\sf 86,& \sf 103\\ &&&\uparrow&&&\\&&&\sf median&&&\end{array}[/tex]

Therefore, the median is the fourth number, which is 48.

[tex]\hrulefill[/tex]

The lower quartile (Q₁) is the median of the data values to the left of the median.  

[tex]\begin{array}{ccccccc}\sf 15, &\sf 18, &\sf 27, &\sf 48, &\sf 52, &\sf 86,& \sf 103\\ &\uparrow &&\uparrow&&&\\&\sf Q_1&&\sf median&&&\end{array}[/tex]

Therefore, the median of the first half of the data is 18.

[tex]\hrulefill[/tex]

The lower quartile (Q₃) is the median of the data values to the right of the median.  

[tex]\begin{array}{ccccccc}\sf 15, &\sf 18, &\sf 27, &\sf 48, &\sf 52, &\sf 86,& \sf 103\\ &&&\uparrow &&\uparrow&\\&&&\sf median&&\sf Q_3&\end{array}[/tex]

Therefore, the median of the second half of the data is 86.

[tex]\hrulefill[/tex]

The interquartile range (IQR) is the difference between the third quartile (Q₃) and the first quartile (Q₁).

[tex]\begin{aligned}\sf IQR &=\sf Q_3 - Q_1 \\&= \sf 86 - 18 \\&= \sf 68\end{aligned}[/tex]

Therefore, the interquartile range is 68.

The angle of elevation of the room is approximately 19.1 degrees.

To determine the angle of elevation of the room, we need to use trigonometry. The angle of elevation is the angle between the horizontal plane and the line of sight from the rover to the room. We can use the tangent function to find this angle:

tan(angle of elevation) = opposite/adjacent

In this case, the opposite side is the vertical distance of 65 meters and the adjacent side is the horizontal distance of 180 meters. So we have:

tan(angle of elevation) = 65/180

To find the angle of elevation, we can take the inverse tangent (or arctan) of both sides:

angle of elevation = arctan(65/180)

Using a calculator, we get:

angle of elevation = 19.1 degrees (rounded to the nearest thousands of degree)

Therefore, the angle of elevation of the room is approximately 19.1 degrees.

To know more about  angle of elevation refer here

https://brainly.com/question/21137209#

#SPJ11

Answer:

0,8

Step-by-step explanation:

Answer:

x^2 / 81 + y^2 / 56 = 1

Step-by-step explanation:

The center of the ellipse is at the midpoint of the foci, which is (0,0). The distance between the center and a vertex is the length of the semi-major axis a, which is 9. The distance between the center and a focus is c, which is 5. The equation for the ellipse is:

(x-0)^2 / 9^2 + (y-0)^2 / b^2 = 1

where b is the length of the semi-minor axis. To find b, you use the relationship:

b^2 = a^2 - c^2

b^2 = 9^2 - 5^2

b^2 = 56

Therefore, the equation for the ellipse is:

x^2 / 81 + y^2 / 56 = 1

The 7/8 and 5/6, when renamed using a common denominator of 24, become 21/24 and 20/24

The two fractions 7/8 and 5/6 need to be renamed using a common denominator.

To find the common denominator, we must first identify a common multiple of the denominators 8 and 6.

The smallest common multiple of 8 and 6 is 24. We can convert both fractions to have a denominator of 24 by multiplying the numerator and denominator of 7/8 by 3/3 and the numerator and denominator of 5/6 by 4/4.

This results in 21/24 and 20/24, respectively.  

Renaming fractions with a common denominator allows us to compare them more easily or perform arithmetic operations on them, which is essential in mathematical problem-solving.

Learn more about Common denominator

brainly.com/question/29775115

#SPJ11

We are not given the distance between the spheres, so we cannot calculate the force without that information.

To calculate the electrostatic force between the two charged spheres, we can use Coulomb's law, which states that the magnitude of the electrostatic force between two point charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.

Mathematically, we can express this as:

F = k * (q1 * q2) / r^2

Where F is the electrostatic force, k is Coulomb's constant (9 x 10^9 N m^2/C^2), q1 and q2 are the charges of the spheres, and r is the distance between their centers.

We are given the charges of the two spheres: sphere A has a charge of +1.0 x 10^-6 C, and sphere B has a charge of -1.6 x 10^-6 C.

However, we are not given the distance between the spheres, so we cannot calculate the force without that information.

To know more about spheres refer here:

https://brainly.com/question/11374994

#SPJ11

The mean absolute deviation is 6.25.

To find the mean absolute deviation (MAD), we first need to find the mean of the scores:

Mean = (68 + 76 + 63 + 58 + 64 + 75 + 78 + 78) / 8 = 69.5

Next, we need to find the absolute deviation of each score from the mean. The absolute deviation is the absolute value of the difference between the score and the mean.

For example, the absolute deviation of the first score (68) is:

|68 - 69.5| = 1.5

We can calculate the absolute deviation for each score:

|68 - 69.5| = 1.5

|76 - 69.5| = 6.5

|63 - 69.5| = 6.5

|58 - 69.5| = 11.5

|64 - 69.5| = 5.5

|75 - 69.5| = 5.5

|78 - 69.5| = 8.5

|78 - 69.5| = 8.5

To find the MAD, we take the average of the absolute deviations:

MAD = (1.5 + 6.5 + 6.5 + 11.5 + 5.5 + 5.5 + 8.5 + 8.5) / 8 = 6.25

Therefore, the mean absolute deviation is 6.25.

To learn more about mean absolute deviation, click here:

https://brainly.com/question/10528201

#SPJ11

We know that by solving for t, you can find the amount of time Roger spent answering phone calls

You can use the equation t + 40 = 90, where t represents the amount of time Roger answers phone calls at the information desk.

This equation takes into account that Roger spends 40 minutes delivering flowers and the total time he volunteers at the hospital is 90 minutes.

By solving for t, you can find the amount of time Roger spent answering phone calls.

To know more about amount refer here

https://brainly.com/question/13024617#

#SPJ11

The amount in pounds of kale Lori bought is 1 1/2 pounds.

To find out how many pounds of kale Lori bought, you need to multiply the total weight of the vegetables by the fraction that represents the proportion of kale.

In this case, you can calculate the amount of kale as follows:

(7 1/2) * (1/5)

First, convert the mixed number 7 1/2 to an improper fraction:

(7 * 2 + 1) / 2 = 15/2

Now multiply the two fractions:

(15/2) * (1/5)

Multiply the numerators together and the denominators together:

(15 * 1) / (2 * 5) = 15 / 10

Now, simplify the fraction:

15 ÷ 5 / 10 ÷ 5 = 3 / 2

So, Lori bought 3/2 or 1 1/2 pounds of kale from the grocery store. This means that out of the total 7 1/2 pounds of vegetables she purchased, 1 1/2 pounds were kale.

Learn more about fraction here: https://brainly.com/question/30154928

#SPJ11

a. By central limit theorem, P(XB- XA >= 0. 2) is approximately 0.0228 under the condition that μA=μB.

b. Yes, we can conclude that the observed difference in sample means does provide evidence that the two population means for the two machines are different.

a. Using the central limit theorem, we know that the sampling distribution of the difference in means (XB - XA) is approximately normal with mean (μB - μA) and standard deviation (σ/√n), where σ is the population standard deviation (σ=1 ounce) and n is the sample size (n=36 for both machines).

So, P(XB - XA >= 0.2) can be calculated by standardizing the difference in means:

Z = (XB - XA - (μB - μA)) / (σ/√n)
Z = (4.7 - 4.5 - 0) / (1/√36)
Z = 2

Looking up the probability of Z being greater than or equal to 2 in a standard normal distribution table, we find P(Z >= 2) = 0.0228.

Therefore, P(XB - XA >= 0.2) is approximately 0.0228 under the condition that μA=μB.

b. The difference in sample means (XB - XA = 0.2) is relatively small compared to the population standard deviation (σ=1 ounce). However, the calculated probability in part a (0.0228) suggests that the observed difference in sample means is statistically significant at a significance level of 0.05 (since P(XB - XA >= 0.2) < 0.05).

Therefore, we can conclude that the observed difference in sample means does provide evidence that the two population means for the two machines are different. However, further testing or analysis may be necessary to confirm this conclusion.

To know more about central limit theorem, refer to the link below:

https://brainly.com/question/18403552#

#SPJ11

Claire's bank balance being -45.32 euros last month meant that she had spent more money than she had in her account, resulting in an overdraft. This means that she owed the bank money and would have to pay back the amount she had spent beyond her account balance along with any associated fees.

However, this month, Claire's bank balance has increased to 17.92 euros. This means that she has deposited money into her account or received a payment that has increased her account balance. It could also mean that she has spent less money than she has earned, resulting in a positive balance.

Having a positive bank balance is always a good thing because it means that you have money to spend and you are not in debt. It is important to keep track of your bank balance regularly and make sure that you do not overspend beyond your means to avoid overdraft fees and financial difficulties.

You can learn more about overdrafts at: brainly.com/question/18083318

#SPJ11

The budgeted ending raw material inventory for May is 2,560 pounds, calculated by taking 25% of the next month's budgeted production (12,800 units) multiplied by 2 pounds per unit.

To solve this problem, we need to calculate the budgeted production and raw material inventory for June, July, and August.

Budgeted production = 12,800 units + 30% * 16,800 units = 17,440 units

Raw material inventory = 25% * 17,440 units * 2 pounds = 8,720 pounds

Budgeted production = 16,800 units + 30% * 14,800 units = 20,840 units

Raw material inventory = 25% * 20,840 units * 2 pounds = 10,420 pounds

Budgeted production = 14,800 units + 30% * 20,840 units = 20,632 units

Raw material inventory = 25% * 20,632 units * 2 pounds = 10,316 pounds

To find the budgeted ending finished goods inventory for June, we need to subtract the budgeted sales for June from the budgeted production for June and add the budgeted ending finished goods inventory for May:

Budgeted ending finished goods inventory for June = 17,440 units - 12,800 units + 3,840 units = 8,480 units

Similarly, we can find the budgeted ending finished goods inventory for July and August:

Budgeted ending finished goods inventory for July = 20,840 units - 16,800 units + 8,480 units = 12,520 units

Budgeted ending finished goods inventory for August = 20,632 units - 14,800 units + 12,520 units = 18,352 units

Therefore, the budgeted ending finished goods inventory for June, July, and August are 8,480 units, 12,520 units, and 18,352 units, respectively. The budgeted raw material inventory for June, July, and August are 8,720 pounds, 10,420 pounds, and 10,316 pounds, respectively.

To learn more about “inventory” refer to the https://brainly.com/question/24868116

#SPJ11

The number of triangles formed or the interior angle sum should be matched to each regular polygon as follows;

In Mathematics and Geometry, the sum of the interior angles of both a regular and irregular polygon can be calculated by using this formula:

Sum of interior angles = 180 × (n - 2)

1,440 = 180 × (n - 2)

1,440 = 180n - 360

180n = 1,440 + 360

n = 1,800/180

n = 10 (decagon).

Sum of interior angles = 180 × (n - 2)

1,800 = 180 × (n - 2)

1,800 = 180n - 360

180n = 1,800 + 360

n = 2,160/180

n = 12 (dodecagon).

Generally speaking, the number of triangles in a regular polygon (n-gon) can be calculated by using this formula;

Number of triangles = n - 2

4 = n - 2

n = 4 + 2 = 6 (regular hexagon).

Number of triangles = n - 2

6 = n - 2

n = 6 + 2 = 8 (regular octagon).

Read more on sum of interior angles here: brainly.com/question/13293407

#SPJ1

Answer:

y=x+8

Step-by-step explanation:

since you are starting with the linear function y=x+7

a translation one unit to the left would be y=x+7(+1)

which gives us the answer y=x+8

The given series are in conditionally convergent

To determine whether the given series is absolutely convergent, conditionally convergent, or divergent, we will use the Comparison Test.
Series in question:
∑ [[tex]5(k(-1)^k + 1)] / (k^2),[/tex] k = 1 to ∞
Step 1: Find the absolute value of the series
| 5([tex]k(-1)^k + 1) / k^2[/tex] |
Step 2: Simplify the absolute value
[tex]5(k + (-1)^k) / k^2[/tex]
Step 3: Use the Comparison Test
We will compare this series to the series ∑ 5k / [tex]k^2,[/tex] k = 1 to ∞.

Since [tex](-1)^k[/tex] is always either 1 or -1, we know that [tex]5(k + (-1)^k) / k^2 \leq 5k / k^2.[/tex]
Step 4: Determine if the comparison series converges
The comparison series can be simplified as

∑ 5 / k, k = 1 to ∞, which is a harmonic series that is known to be divergent.
Step 5: Determine the original series' convergence status
Since the comparison series is divergent, we cannot determine if the original series is absolutely convergent using the Comparison Test.
However, we can now investigate if the series is conditionally convergent by considering the alternating series

∑ (-1)^k(5k) / [tex]k^2[/tex], k = 1 to ∞.
Since the series' terms decrease in magnitude (5k / [tex]k^2[/tex] decreases as k increases) and the limit of the terms as k approaches infinity is zero, the series is conditionally convergent by the Alternating Series Test.
In conclusion, the given series is conditionally convergent.

To know more about Comparison test:

https://brainly.com/question/31362838

#SPJ11

If c represents the cost per pound for the plums, the cost per pound for the plums is $0.90.

First, we need to determine the total cost of the plums before the coupon was applied.

4 1/5 pounds can be written as a mixed number:

4 1/5 = 21/5

So, the total cost of the plums without the coupon can be found by multiplying the cost per pound (c) by 21/5:

Total cost = c * 21/5

Now we can create an equation to represent the total cost after the coupon was applied:

Total cost - coupon = $3.23

Substituting the expression for total cost:

c * 21/5 - 0.55 = 3.23

To solve for c, we can start by adding 0.55 to both sides:

c * 21/5 = 3.78

Then, we can isolate c by multiplying both sides by the reciprocal of 21/5:

c = 3.78 / (21/5)

c = 0.90

Therefore, the cost per pound for the plums is $0.90.

More on cost: https://brainly.com/question/13001095

#SPJ11

The function that best models the number of game consoles sold in millions x years since 2010 is option B, g(x) = 0.15(20).

To answer this question, we need to identify the function that best models the number of game consoles sold in millions x years since 2010.

Option A can be simplified to g(x) = 30, which is a constant function. This means that it does not depend on the value of x and is not a good model for the number of game consoles sold over time.

Option B can be simplified to g(x) = 3x, which is a linear function. This means that the number of game consoles sold increases at a constant rate over time. This could be a good model for the number of game consoles sold, but we need to compare it to the other options.

Option C can be simplified to g(x) = 0.03x, which is also a linear function. However, the rate of increase is much slower than in option B. This is not a good model for the number of game consoles sold.

Option D can be simplified to g(x) = 300, which is a constant function like option A. Again, this is not a good model for the number of game consoles sold over time.

Therefore, the function that best models the number of game consoles sold in millions x years since 2010 is option B, g(x) = 0.15(20). This is a linear function that represents a constant rate of increase in the number of game consoles sold over time.

Learn more about "function": https://brainly.com/question/2328150

#SPJ11

complete question:

Based on this information, which function best models the number of game consoles

sold in millions x years since 2010?

A- g(x) = 0.15(20)^x

B- g(x) = 20(0.15)^x

C- g(x) = 20(1.5)^x

D- g(x) = 0.15(.2)^x

Reflection across the y-axis is the transformation used to the polygon ABCD. The type of transformation shown is a horizontal translation.

A polygon is closed geometric shape that is made up of straight line segments connected end to end. It is  two-dimensional shape that has three or more sides, angles, and vertices.

In a polygon, sides do not cross each other and vertices are points where two sides meet.

1)  The type of transformation shown in the image is a Horizontal translation, because the second polygon A'B'C'D' is moved horizontally to the right of the original polygon ABCD while maintaining its size and shape.

2) 90° clockwise rotation

3)  90° counterclockwise rotation.

4)  Reflection across the x-axis.

5)  Reflection across the y-axis.

6)  Reflection across the y-axis

7)  the correct answer is 180° clockwise rotation.

The type of transformation shown is a horizontal translation, since the image has been shifted horizontally from the original position.

To know more about Vertices visit:

brainly.com/question/1217219

#SPJ1

complete question -

The product (k/3) x 12 is greater than 12 for values of k greater than 3.

To determine the values of k for which the product (k/3) x 12 is greater than 12, follow these steps:

Step 1: Set up the inequality:
(k/3) x 12 > 12

Step 2: Simplify the inequality by dividing both sides by 12:
(k/3) > 1

Step 3: Multiply both sides by 3 to solve for k:
k > 3

So, the product (k/3) x 12 is greater than 12 for values of k greater than 3.

Learn more about inequality,

https://brainly.com/question/25944814

#SPJ11

Sally Rose's new balance is $3,282.35, and option (b) is the correct answer.

Sally Rose's charge account statement contains information about her previous balance, finance charge, new purchases, and payment. To determine her new balance, we need to take the previous balance, add the finance charge and new purchases, and then subtract the payment.

Starting with the previous balance of $6,472.82, we add the finance charge of $12.95 and new purchases of $1,697.08 to get a total of:

$6,472.82 + $12.95 + $1,697.08 = $8,182.85

Next, we subtract the payment of $4,900.50 to get the new balance:

$8,182.85 - $4,900.50 = $3,282.35

It's important to keep track of credit card balances to avoid accumulating too much debt and paying high interest charges. When making credit card payments, it's a good idea to pay more than the minimum amount due, which can help reduce the balance faster and save money on interest charges over time. The answer is option b).

Know more about new balance here:

https://brainly.com/question/8549088

#SPJ11

The volume of the solid is (7π - 8√2)/12 cubic units.

To find the volume of the solid enclosed by the cone and sphere in cylindrical coordinates, we first need to express the equations of the cone and sphere in cylindrical coordinates.

Cylindrical coordinates are expressed as (ρ, θ, z), where ρ is the distance from the origin to a point in the xy-plane, θ is the angle between the x-axis and a line connecting the origin to the point in the xy-plane, and z is the height above the xy-plane.

The cone z = x^2 + y^2 can be expressed in cylindrical coordinates as ρ^2 = z, and the sphere x^2 + y^2 + z^2 = 2 can be expressed as ρ^2 + z^2 = 2.

To find the limits of integration for ρ, θ, and z, we need to visualize the solid. The cone intersects the sphere at a circle in the xy-plane with radius 1. We can integrate over this circle by setting ρ = 1 and integrating over θ from 0 to 2π.

The limits of integration for z are from the cone to the sphere. At ρ = 1, the cone and sphere intersect at z = 1, so we integrate z from 0 to 1.

Therefore, the volume of the solid enclosed by the cone and sphere in cylindrical coordinates is

V = ∫∫∫ ρ dz dρ dθ, where the limits of integration are

0 ≤ θ ≤ 2π

0 ≤ ρ ≤ 1

0 ≤ z ≤ ρ^2 for ρ^2 ≤ 1, and 0 ≤ z ≤ √(2 - ρ^2) for ρ^2 > 1.

Integrating over z, we get

V = ∫∫ ρ(ρ^2) dρ dθ for ρ^2 ≤ 1, and

V = ∫∫ ρ(√(2 - ρ^2))^2 dρ dθ for ρ^2 > 1.

Evaluating the integrals, we get

V = ∫0^1 ∫0^2π ρ^3 dθ dρ = π/4

and

V = ∫1^√2 ∫0^2π ρ(2 - ρ^2) dθ dρ = π/3 - 2√2/3

Therefore, the total volume of the solid enclosed by the cone and sphere in cylindrical coordinates is

V = π/4 + π/3 - 2√2/3

= (7π - 8√2)/12 cubic units

Learn more about volume here

brainly.com/question/17056637

#SPJ4

The given question is incomplete, the complete question is:

Use cylindrical coordinates Find the volume of the solid that is enclosed by the cone z = x^2 + y^2 and the sphere x^2 + y^2 + z^2 = 2

To find the volume of the solid above the triangle R and below the plane z = x, we can use a triple integral with cylindrical coordinates.

First, we can note that the triangle R lies in the x-y plane and is symmetric with respect to the line y = x. Therefore, we can consider the solid above the portion of R in the first quadrant and then multiply the result by 4 to get the total volume.

In cylindrical coordinates, we have:

z = r cos(theta)

x = r sin(theta)

The bounds for r and theta can be obtained by considering the equations of the lines that bound the portion of R in the first quadrant. These lines are:

y = (1/2) x

y = 4 - (1/2) x

Solving for x and y in terms of r and theta, we get:

x = r sin(theta)

y = r cos(theta)

Substituting these expressions into the equations of the lines and solving for r, we get:

r = 8 sin(theta) / (3 + 2 cos(theta))

The bounds for theta are 0 and pi/2, since we are considering the portion of R in the first quadrant.

The bounds for z are from z = 0 to z = x = r sin(theta).

Therefore, the triple integral for the volume is:

V = 4 * ∫[0, pi/2] ∫[0, 8 sin(theta) / (3 + 2 cos(theta))] ∫[0, r sin(theta)] 1 dz dr dtheta

This integral can be evaluated using standard techniques, such as trigonometric substitution. The result is:

V = 32/3

Therefore, q5 = 32/3.

Learn more about trigonometric substitution.

https://brainly.com/question/31397777

#SPJ4

The average rate of change for the function f(x) = x² + 6x between x = 0 and x = 7 is 13.

To find the average rate of change for the given function f(x) = x² + 6x between x = 0 and x = 7, you can follow these steps: Calculate the value of the function at the given points.
f(0) = 0² + 6(0) = 0
f(7) = 7² + 6(7) = 49 + 42 = 91

Use the average rate of change formula, which is (f(b) - f(a)) / (b - a), where a and b are the given points.

Substitute the values into the formula:
Average rate of change = (f(7) - f(0)) / (7 - 0) = (91 - 0) / 7 = 91 / 7 = 13

Therefore the average rate of change for the function f(x) = x² + 6x between x = 0 and x = 7 is calculated to be 13.

More on rate of change: https://brainly.com/question/29115863

#SPJ11

The calculated height of the mountain is approximately 548.5 ft

We can use trigonometry to solve this problem. Let h be the height of the mountain. Then we have:

sin(47°) = h / 750

Multiplying both sides by 750, we get:

h = 750 sin 47°

Using a calculator, we find:

h ≈ 548.5 ft

Therefore, the height of the mountain is approximately 548.5 ft

Read more about bearing distance at

https://brainly.com/question/22719608

#SPJ1

The number of bases, faces, edges and vertices are;

7. 2, 4, 6, 6

8. 6, 5, 10, 10

9. 1, 4, 5, 5

10. 1, 5, 7 , 7

11. 1, 5, 7, 7

12. 1, 3, 4 , 4

To determine the number, we need to take the following into considerations;

Learn about edges at: https://brainly.com/question/22735873

#SPJ1

Answer:

This function is an exponential function because the base is a constant and the exponent is a variable.

Answer:

C) 1,050

Step-by-step explanation:

We can see that to get from 8.4 to 42 and to get from 42 to 210, we have to multiply by 5.

To complete the sequence, multiply 210 by 5

210·5

=1,050

Hope this helps!

The total surface area of the figure shown as a rectangular prism is 208. 6 cm

The formula for calculating the total surface area of a rectangular prism is expressed as;

TSA =  2 (lh +wh + lw )

Such that the parameters are;

Now, substitute the values, we have;

TSA = 2(2(9) + 7.9(9) + 2(7.6)

expand the bracket, we have;

TSA = 2(18 + 71.1 + 15.2)

add the values

TSA = 2(104. 3)

TSA = 208. 6

Learn about rectangular prism at: https://brainly.com/question/24284033

#SPJ1

By accurately listing your possessions and their values, you can ensure that you will receive the appropriate amount of money in case any of your belongings are lost or stolen.

To create this list, consider the following steps:
List your possessions: Start by creating a list of all the items you currently own and the ones you plan to purchase before moving into the apartment. Include furniture, electronics, appliances, clothing, and other personal belongings.
Determine the value of each item: Next, assign a monetary value to each item on your list. This can be the amount you paid for the item, its current market value, or a rough estimate based on similar items in the market.
Add up the total value: Add up the monetary values of all the items on your list to get the total value of your possessions. This will help you determine the amount of renters' insurance coverage you need to protect your belongings.
Research renters' insurance policies: Look for insurance providers that offer renters' insurance policies and compare their coverage options, deductibles, and premiums. Choose a policy that best suits your needs and budget.
Provide the list to the insurance provider: Once you have chosen an insurance provider, submit your list of possessions and their values. This will help them determine the appropriate coverage amount and premium for your renters' insurance policy.
Remember, by accurately listing your possessions and their values, you can ensure that you will receive the appropriate amount of money in case any of your belongings are lost or stolen.

Learn more about possesssions here, https://brainly.com/question/30261629

#SPJ11

An equation to model this situation will be S(t) = 4 * 10^(t). The average rate of change for the number of shares from 2 minutes to 4 minutes is approximately 19,800 shares per minute.

a. Let S(t) be the number of shares of the video at time t in minutes after Steph Curry shared it with his friends. The initial number of shares is 4 (the 4 friends he shared it with), and the number of shares increases by a factor of 10 every minute. Therefore, we can model this situation with the exponential function:

S(t) = 4 * 10^(t)

b. The average rate of change for the number of shares from 2 minutes to 4 minutes can be calculated by finding the slope of the line connecting the points (2, S(2)) and (4, S(4)) on the graph of S(t). Using the equation S(t) = 4 * 10^(t), we have:

S(2) = 4 * 10^(2) = 400

S(4) = 4 * 10^(4) = 40,000

The slope of the line connecting these two points is:

(S(4) - S(2)) / (4 - 2) = (40,000 - 400) / 2 = 19,800

Therefore, the average rate of change for the number of shares from 2 minutes to 4 minutes is approximately 19,800 shares per minute.

To learn more about equations, click here:

https://brainly.com/question/2972832

#SPJ11

Thus, the coordinates of Quadrilateral A'B'C'D' after the dilation with the scale factor of 1/2 are -  A'(1.5, 2), B'(0.5, 5), C'(6, 7), D'(4.5, 1.4).

In geometry, a dilation is a transformation that alters an object's size without altering its general shape.

Dilation is a particular kind of transformation in geometry that modifies an object's size while maintaining its overall shape.

Given:

scale factor = 1/2

coordinates of Quadrilateral ABCD

A(3,4) , B(1,10) ,C(12,14), D(9,3)

Now, coordinates about the dilation with centre C:, multiply each coordinate with 1/2.

A'(3*1/2,4*1/2)   --> A'(1.5, 2)

B'(1*1/2,10*1/2)    ---> B'(0.5, 5)

C'(12*1/2,14*1/2), --> C'(6, 7)

D'(9*1/2,3*1/2) ---> D'(4.5, 1.4)

Thus, the coordinates of Quadrilateral A'B'C'D' after the dilation with the scale factor of 1/2 are -  A'(1.5, 2), B'(0.5, 5), C'(6, 7), D'(4.5, 1.4).

Graph is attached.

Know more about the dilation:

https://brainly.com/question/20482938

#SPJ1