A CD is a solid disk of mass of 0.0140
kg and a radius 0.0600 m. It rotates at
31.4 rad/s. What is its ROTATIONAL
KE?

According to Einstein's theory of relativity, an object's mass increases as its velocity approaches the speed of light. To increase its mass by 75%, an object would need to travel at 0.7 times the speed of light.

For more questions on Einstein's theory of relativity

https://brainly.com/question/14140033

#SPJ8

When a light ray travels from one medium to another, such as from air to water, it undergoes a change in direction. This change in direction is known as refraction.

Refraction occurs due to the change in the speed of light as it enters a medium with a different refractive index.

In this case, when a light ray travels from the air (refractive index of approximately 1.0) to water (refractive index of approximately 1.3), the following happens:

1. The light ray approaches the water-air interface.

2. As the light ray enters the water, its speed decreases because the refractive index of water is greater than that of air.

3. The change in speed causes the light ray to bend towards the normal, which is an imaginary line perpendicular to the water-air interface.

4. The angle between the incident ray and the normal is known as the angle of incidence, and the angle between the refracted ray and the normal is known as the angle of refraction.

5. According to Snell's law, the ratio of the sines of the angles of incidence and refraction is equal to the ratio of the refractive indices of the two mediums:

This relationship determines how much the light ray will bend as it enters the water.

know more about angle of incidence here:

https://brainly.com/question/30402542

#SPJ8

The vector product of A=2.00i+3.00j+1.00k and B=1.00i-3.00j-2.00k is C=9.00i+4.00j-9.00k.

To find the vector product (also known as the cross product) of two vectors, A and B, we can use the following formula:

C = A × B

Where C is the resultant vector, A and B are the given vectors, and × denotes the cross product.

Given A = 2.00i + 3.00j + 1.00k and B = 1.00i - 3.00j - 2.00k, we can substitute these values into the formula to find the vector product:

C = (2.00i + 3.00j + 1.00k) × (1.00i - 3.00j - 2.00k)

Now, let's expand the cross product using the properties of vector products:

C = (2.00i × 1.00i) + (2.00i × -3.00j) + (2.00i × -2.00k) +

   (3.00j × 1.00i) + (3.00j × -3.00j) + (3.00j × -2.00k) +

   (1.00k × 1.00i) + (1.00k × -3.00j) + (1.00k × -2.00k)

Now, let's calculate each of these cross products:

C = (2.00 × 1.00) [tex]i^2[/tex] + (2.00 × -3.00) i × j + (2.00 × -2.00) i × k +

   (3.00 × 1.00) j × i + (3.00 × -3.00) [tex]j^2[/tex] + (3.00 × -2.00) j × k +

   (1.00 × 1.00) k × i + (1.00 × -3.00) k × j + (1.00 × -2.00) [tex]k^2[/tex]

Since i × j = k, j × k = i, and k × i = j, we can simplify the expression further:

C = 2.00k - 6.00i + 4.00i - 9.00j + k - 3.00j - 2.00j - 2.00k

Combining like terms, we get:

C = (2.00i + 4.00i) + (-6.00i - 9.00j - 3.00j) + (2.00k + k - 2.00k)

Simplifying further:

C = 6.00i - 12.00j + k

Therefore, the vector product of A and B is C = 6.00i - 12.00j + k, which can be written as C = 9.00i + 4.00j - 9.00k in terms of i, j, and k.

For more such questions on vector product , click on:

https://brainly.com/question/30394406

#SPJ8

The vector product of A and B is -3i - 5j - 9k.

The vector product, also known as the cross product, of two vectors A and B is denoted as A x B. It is a vector that is perpendicular to both A and B. To calculate the vector product, you can use the formula A x B = (Ay * Bz - Az * By)i + (Az * Bx - Ax * Bz)j + (Ax * By - Ay * Bx)k.

In this case, we have A = 2.00i + 3.00j + 1.00k and B = 1.00i - 3.00j - 2.00k. Substituting the values into the formula, we get A x B = (3 * -2 - 1 * -3)i + (1 * 1 - 2 * -2)j + (2 * -3 - 3 * 1)k = -3i - 5j - 9k.

https://brainly.com/question/35897398

#SPJ6

The force that results in the decrease in speed from the midpoint to the end of the track is friction. The friction force slows down the vehicle because it acts in the opposite direction of the car's motion.

The force that would cause the Hot Wheels car to slow down from the midpoint of the track to the end of the track is friction between the car's wheels and the track.

Friction is a force that opposes motion between two surfaces in contact.

In this case, the wheels of the car and the surface of the track are in contact, and the friction force acts in the opposite direction of the car's motion, which slows it down.

As the Hot Wheels car travels down Track #2 during the Speed Lab activity, its initial velocity decreases due to friction.

Friction is a resistance force that opposes motion.

It is caused by the interaction between the surfaces in contact. In this case, the surface of the track and the wheels of the car are in contact.

When the car is moving, there is friction between the two surfaces.

The direction of the friction force is opposite to the direction of motion of the car.

This means that the friction force slows the car down.

In conclusion, the force that results in the decrease in speed from the midpoint to the end of the track is friction.

The friction force slows down the vehicle because it acts in the opposite direction of the car's motion.

For more questions on force

https://brainly.com/question/30762901

#SPJ8

Answer:206.3

Explanation:

Answer:

Suppose the  object were stationary and emitting waves that had a distance of 1 m between crests - the receiver would receive waves that had a distance of 1  between crests

Suppose the object were moving towards the receiver, then there would no longer be 1 m between the crests as measured in the laboratory frame because of movement of  the object.

Then the receiver would receive waves that were less than 1 m apart and would report a higher frequency than if the object were stationary,

The final velocity of the pair of hockey players is 4.12 m/s.

In an inelastic collision, the two objects stick together and move as a single unit after the collision. To calculate the final velocity of the pair of hockey players, we can apply the principle of conservation of momentum.

The initial momentum of the system is given by the sum of the individual momenta of the players before the collision. The momentum (p) of an object is defined as the product of its mass (m) and velocity (v): p = m * v.

For the first player, with a mass of 80 kg and initial velocity of 7.5 m/s, the initial momentum is 80 kg * 7.5 m/s = 600 kg·m/s. For the second player, with a mass of 75 kg and initial velocity of 0.5 m/s, the initial momentum is 75 kg * 0.5 m/s = 37.5 kg·m/s.

The total initial momentum of the system is the sum of these individual momenta: 600 kg·m/s + 37.5 kg·m/s = 637.5 kg·m/s.

Since the collision is completely inelastic, the two players stick together and move as a single unit after the collision. Therefore, the final velocity of the pair of hockey players is determined by dividing the total initial momentum by the total mass of the system: final velocity = total initial momentum / total mass.

The total mass of the system is 80 kg + 75 kg = 155 kg. Dividing the initial momentum (637.5 kg·m/s) by the total mass (155 kg), we find the final velocity of the pair of hockey players to be approximately 4.12 m/s.

Know more about velocity here:

https://brainly.com/question/80295

#SPJ8

Answer: Here you go, i hope this kinda helps.

Explanation:Disambiguation is just a fancy way of saying "asking clarifying questions".

Watson Assistant replies to user's questions based on a confidence score.

Sometimes the customer's question could be interpreted in two or three different ways.

For example, if you say you'd like to "book a table for 8", the assistant is able to ask a clarifying question:

Did you mean booking a table for 8PM, 8AM, or booking a table for 8 guests?

Watson Assistant will ask the question when its confidence score is divided between a few options to ensure that your customers get exactly the right service they need.

Explanation:

A machine is useful because it can perform tasks or processes more efficiently, accurately, and consistently than humans. Machines are designed to automate or augment various functions, ranging from simple to complex, across numerous industries and domains. Here are some key reasons why machines are valuable:

1. Efficiency: Machines can complete tasks at a much faster pace than humans, significantly improving productivity. They operate without fatigue, breaks, or distractions, ensuring continuous and uninterrupted performance.

2. Accuracy: Machines are built to execute tasks with precision and minimal errors. They can follow programmed instructions or algorithms meticulously, reducing the chances of mistakes and increasing overall quality and reliability.

3. Repetitive or labor-intensive tasks: Machines excel at handling repetitive or physically demanding tasks that may be monotonous or hazardous for humans. By automating such tasks, machines free up human resources to focus on more complex and creative endeavors.

4. Scalability: Machines offer scalability, allowing businesses and industries to handle larger workloads or increasing demands. They can be easily replicated or scaled up to meet production requirements without compromising performance.

5. Data processing and analysis: Machines possess the capability to process and analyze vast amounts of data quickly, extracting valuable insights and patterns that would be time-consuming for humans to perform manually. This is especially crucial in fields like data science, finance, and scientific research.

6. Precision and consistency: Machines can achieve a high level of precision and maintain consistency in their output, ensuring that tasks are completed with a predefined level of accuracy. This is particularly advantageous in manufacturing, engineering, and medical applications.

7. Risk reduction: Machines can be utilized in hazardous or risky environments where human safety might be compromised. They can perform tasks in extreme temperatures, toxic conditions, or dangerous settings, minimizing human exposure to potential harm.

8. Enhancing human capabilities: Machines can augment human abilities by providing advanced tools, equipment, or robotic assistance. They can enhance human productivity, accuracy, and effectiveness, resulting in improved outcomes in various fields.

9. Increased productivity and cost-effectiveness: By streamlining processes and minimizing manual labor, machines contribute to enhanced productivity and reduced costs. They can optimize resource utilization, decrease waste, and optimize production efficiency.

10. Innovation and exploration: Machines facilitate innovation and exploration by enabling complex simulations, modeling, and experimentation. They support scientific discoveries, technological advancements, and the development of new products or services.

It's important to note that while machines offer numerous benefits, they are not meant to replace humans entirely. Instead, they work alongside humans, complementing their skills and expertise to create a powerful partnership that drives progress and efficiency in various industries.

Answer:

Explanation:

The quantity of heat energy that must be transferred to 2.25 kg of brass to raise its temperature from 20 °C to 240 °C is 195030 J

First, we shall list out the given parameters from the question. This is shown below:

The quantity of heat energy that must be transferred can be obtained as follow:

Q = MCΔT

= 2.25 × 394 × 220

= 195030 J

Thus, we can conclude quantity of heat energy that must be transferred is 195030 J

Learn more about heat:

https://brainly.com/question/16398667

#SPJ1

Answer:

The answer is given in the picture.

Hope it helps...

A wire perpendicular to the screen carries a current and then the direction of the magnetic field at point Z is upward

To determine the direction of the magnetic field at point Z, we need to apply the right-hand rule for current-carrying wires. The right-hand rule states that if you point your right thumb in the direction of the current flow, then the direction in which your fingers curl represents the direction of the magnetic field around the wire.

In the given scenario, the wire is perpendicular to the screen, and the current is flowing in the direction shown by the arrow (from left to right). To determine the magnetic field at point Z, we can imagine wrapping our right hand around the wire such that our fingers curl in the direction of the current (from left to right). When we do this, our thumb points in the upward direction.

Therefore, the direction of the magnetic field at point Z is upward. This means that the magnetic field lines around the wire at point Z are oriented in a counterclockwise direction when viewed from above the screen.

It's important to note that the direction of the magnetic field depends on the direction of the current flow. If the current were flowing in the opposite direction (from right to left), the direction of the magnetic field at point Z would be downward.

Know more about magnetic field here:

https://brainly.com/question/14411049

#SPJ8

The gravitational force between objects increases with an increase in mass and decreases with an increase in distance. So, a smaller distance and a greater mass result in a greater gravitational force.

The correct answers to this question are 'A. Smaller distance results in greater force' and 'D. Greater mass results in greater force'. According to the universal law of gravitation, the gravitational force between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between them. This means that as the mass of one or both objects increases, the gravitational force also increases. Conversely, as the distance between the objects increases, the gravitational force decreases. Hence, a smaller distance would result in a greater force and a greater mass would also result in a greater force.

https://brainly.com/question/26060582

#SPJ2

Levi will take 19.23 seconds to accelerate uniformly to a stop, leaving 3 meters between Chimdi and his bumper.

To determine how long it will take for Levi's car to accelerate uniformly to a stop, we need to calculate the time it takes for the car to cover the distance between Chimdi and his bumper.

The initial distance between Levi's car and Chimdi is 99 meters, and he wants to leave 3 meters between them when the car comes to a stop. Therefore, the total distance the car needs to cover is 99 meters - 3 meters = 96 meters.

We also know that the car is traveling at a speed of 10 m/s. However, we need to convert this speed to meters per second squared (m/s²) to calculate the time for acceleration.

Let's assume the car decelerates uniformly. We can use the equation:

v^2 = u^2 + 2as,

where v is the final velocity (0 m/s since the car comes to a stop), u is the initial velocity (10 m/s), a is the acceleration, and s is the distance.

Rearranging the equation, we have:

a = (v^2 - u^2) / (2s)

a = (0^2 - 10^2) / (2 * 96)

a = -100 / 192

a ≈ -0.52 m/s²

The negative sign indicates deceleration.

Now, we can use the equation:

v = u + at,

where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time.

Substituting the known values, we have:

0 = 10 + (-0.52) * t

Simplifying, we find:

0 = 10 - 0.52t

0.52t = 10

t ≈ 19.23 seconds

Therefore, it will take approximately 19.23 seconds for Levi's car to accelerate uniformly to a stop, leaving 3 meters between Chimdi and his bumper.

Know more about speed here:

https://brainly.com/question/13262646

#SPJ8

The position of John at a time of 4.53 s is 20.8 m.

It is essential to know that the formula for position, velocity, and acceleration is given as:

[tex]$$x=x_0+v_0t+\frac{1}{2}at^2$$[/tex]

[tex]$$v=v_0+at$$[/tex]

[tex]$$v^2=v_0^2+2a(x-x_0)$$[/tex]

Here, x is the position, v is the velocity, t is the time elapsed, and a is the acceleration. John's position at a time of 4.53 s is given as follows:

Given,

[tex]$$x_0=0, v_0=4.6 m/s, t=4.53s, a=-9.8m/s^2$$[/tex]

From the above formula, we can calculate the position of John at a time of 4.53 s.Substitute all the values in the formula for position, and we get,

[tex]$$x=x_0+v_0t+\frac{1}{2}at^2$$[/tex]

[tex]$$x=0+(4.6)(4.53)+\frac{1}{2}(-9.8)(4.53)^2$$[/tex]

[tex]$$x=20.8 m$$[/tex]

Therefore, the position of John at a time of 4.53 s is 20.8 m.

For more such questions on position, click on:

https://brainly.com/question/24778368

#SPJ8

Lithium nitride consists of two ions chemically bonded together. Lithium is an element that has a +1 charge, while nitrogen is an element that has a -3 charge. As a result, the lithium ion and the nitride ion have charges of +1 and -3, respectively. The chemical formula for lithium nitride is Li3N.

Lithium is a group 1 element, which means it has one valence electron. Nitrogen is a group 15 element, which means it has five valence electrons. Lithium and nitrogen chemically bond to form lithium nitride by sharing electrons from each element's valence shell. Since nitrogen has a higher electronegativity than lithium, it pulls the shared electrons closer to itself, resulting in a negative charge.

Nitride is a compound ion that is formed when a nitrogen atom gains three electrons. The electron configuration of nitrogen is 1s2 2s2 2p3, while the electron configuration of nitride is 1s2 2s2 2p6. Nitride, which has a -3 charge, is isoelectronic with neon and has a stable electron configuration. Lithium is a metal that belongs to the alkali metal family. Lithium has one electron in its outer shell, which it can donate to form a positive ion. As a result, lithium ions have a +1 charge.

For more such questions on Lithium nitride, click on:

https://brainly.com/question/22922296

#SPJ8

The probability that the basketball player makes no more than 20 free throws out of 28 is 0.836 or 83.6%.

To find the probability that the basketball player makes no more than 20 free throws out of 28, we need to calculate the cumulative probability of making 20 or fewer free throws.

Let's denote the probability of making a free throw as "p" and the number of free throws made as "x". In this case, p = 0.603 and we want to find the probability of x ≤ 20 out of 28 free throws.

We can use the binomial probability formula to calculate this cumulative probability:

P(x ≤ 20) = P(x = 0) + P(x = 1) + P(x = 2) + ... + P(x = 20)

P(x = k) = C(n, k) * [tex]p^k[/tex] *[tex](1 - p)^{(n - k)[/tex]

Where

C(n, k) = binomial coefficient

Given by n! / (k! * (n - k)!), and represents the number of ways to choose k successes out of n trials.

Now we can calculate the probability using this formula:

P(x ≤ 20) = P(x = 0) + P(x = 1) + P(x = 2) + ... + P(x = 20)

P(x ≤ 20) = ∑ [C(28, k) * [tex]p^k[/tex] * [tex](1 - p)^{(28 - k)[/tex]] for k = 0 to 20

Calculating this sum can be quite tedious, so it's often more convenient to use statistical software or a binomial probability calculator. For instance, using a calculator, the probability is approximately 0.836.

Therefore, the probability that the basketball player makes no more than 20 free throws out of 28 is approximately 0.836 or 83.6%.

know more about probability here:

https://brainly.com/question/30631532

#SPJ8

Here is a movement lesson that includes two gross motor activities for enhancing the learning of mathematics and two gross motor activities for enhancing language development are Hopscotch , Counting Hike , Follow the Leader ,Simon Says.

Mathematics Activities

1. Hopscotch: Create a hopscotch board on the ground with numbers ranging from 1 to 10. Invite children to hop through the squares as they recite the numbers in order. They can also be asked to skip certain numbers, add numbers together, or subtract numbers in order to work on addition and subtraction concepts.

2. Counting Hike: Take a walk with the children while counting everything in the surrounding environment, such as trees, cars, and rocks. This activity can help children learn to count forward and backward, as well as work on one-to-one correspondence.

Language Activities

1. Follow the Leader: Children can take turns being the leader and performing various actions, such as hopping, skipping, crawling, or clapping, while the other children follow and repeat the leader's words. This activity can help children learn new vocabulary words, practice listening skills, and develop their spatial awareness.

2. Simon Says: Play a game of Simon Says, but with a language twist. Instead of only giving physical commands, you can also give language commands, such as "Simon says say your name backward" or "Simon says spell the word cat backward." This activity can help children work on language skills, such as pronunciation, spelling, and grammar.

Know more about   physical  here:

https://brainly.com/question/21661403

#SPJ8

Answer:

To find the resultant force and its direction, we can use vector addition.

First, let's break down force B and force C into their horizontal and vertical components:

Horizontal component of force B:

Bx = 20N * cos(140°)

Vertical component of force B:

By = 20N * sin(140°)

Horizontal component of force C:

Cx = 16N * cos(290°)

Vertical component of force C:

Cy = 16N * sin(290°)

Now, let's add up the horizontal and vertical components of all the forces:

Horizontal component of resultant force:

Rx = Ax + Bx + Cx

Vertical component of resultant force:

Ry = Ay + By + Cy

To find the magnitude of the resultant force (R), we use the Pythagorean theorem:

R = sqrt(Rx^2 + Ry^2)

To find the direction (θ) of the resultant force, we can use the inverse tangent function:

θ = atan(Ry / Rx)

Plugging in the given values:

Ax = 12N (horizontal component of force A)

Ay = 0N (vertical component of force A)

Bx = 20N * cos(140°)

By = 20N * sin(140°)

Cx = 16N * cos(290°)

Cy = 16N * sin(290°)

Now let's calculate the values:

Bx = 20N * cos(140°) ≈ -11.55 N

By = 20N * sin(140°) ≈ 9.56 N

Cx = 16N * cos(290°) ≈ 13.82 N

Cy = 16N * sin(290°) ≈ -5.45 N

Rx = 12N + (-11.55N) + 13.82N ≈ 14.27 N

Ry = 0N + 9.56N + (-5.45N) ≈ 4.11 N

R = sqrt(14.27^2 + 4.11^2) ≈ 14.98 N

θ = atan(4.11 / 14.27) ≈ -15.58°

The magnitude of the resultant force is approximately 14.98 N, and the direction is approximately -15.58° (or approximately -45° to force A).

Note: The negative sign indicates that the resultant force is in the opposite direction to force A.

Force equals the distance between the fulcrum and the line of action of force multiplied by the magnitude of the force is the principle of torque, which is the rotational equivalent of force.

In a lever system, the fulcrum is the fixed point around which the lever rotates. The line of action of force is an imaginary line that represents the direction in which the force is applied. The distance between the fulcrum and the line of action of force is known as the lever arm or moment arm.

When a force is applied to a lever arm, it creates a turning effect or torque. The magnitude of the torque is given by the product of the force and the lever arm distance. Mathematically, torque (τ) is expressed as τ = F * d, where F represents the force applied and d represents the lever arm distance.

By adjusting the distance between the fulcrum and the line of action of force, it is possible to increase or decrease the torque produced by a force. This principle is utilized in various mechanical systems and devices, such as seesaws, wrenches, and crowbars, where the lever arm distance plays a crucial role in determining the effectiveness of the force applied.

Know more about Torque here:

https://brainly.com/question/17512177

#SPJ8

a. The energy of the photon is 2.86 × 10^−19 J.

b. The maximum kinetic energy of the ejected photo electron is 1.06 × 10^−20 J.

c. The threshold frequency for the material is 1.06 × 10^15 Hz.

The energy of the photon is given by:

E = hf where f is the frequency of the photon and h is Planck’s constant.

The frequency of the photon is given as f = 6.92 × 10^14 Hz and Planck’s constant is

h = 4.14 × 10^−15 eV.s.E = hf= 6.92 × 10^14 × 4.14 × 10^−15= 2.86 × 10^−19 J.

The maximum kinetic energy of the ejected photo electron is given by:

KEmax = E − φwhere E is the energy of the photon and φ is the work function of the material.

The work function of the material is given as

φ = 2.75 eV = 2.75 × 1.60 × 10^−19 J.

KEmax = E − φ= 2.86 × 10^−19 − 2.75 × 1.60 × 10^−19= 1.06 × 10^−20 J

The threshold frequency for the material is given by:

f0 = φ/h where φ is the work function and h is Planck’s constant.

f0 = φ/h= 2.75 × 1.60 × 10^−19/4.14 × 10^−15= 1.06 × 10^15 Hz.

Thus, the energy of the photon is 2.86 × 10^−19 J, the maximum kinetic energy of the ejected photo electron is 1.06 × 10^−20 J, and the threshold frequency for the material is 1.06 × 10^15 Hz.

For more such questions on threshold frequency, click on:

https://brainly.com/question/726252

#SPJ8

The net force on q3 due to q1 and q2 is [tex]-13.76 * 10^{-3} N[/tex].

For more questions on net force

https://brainly.com/question/14361879

#SPJ8

The minimum distance to speaker 2 for there to be destructive interference at that spot is 1.145 meters.

Destructive interference is said to happen when two waves with identical frequencies and amplitudes interfere with each other resulting in a wave with amplitude zero.

In order for us to calculate the minimum distance to speaker 2 for there to be destructive interference at that spot, we need to follow these steps:

Step 1: Find the wavelength of the sound waves wavelength, λ = speed of sound / frequency, f

The speed of sound is 343 m/s because the question doesn't give any value for it.

Therefore, λ = 343 / 240Hz = 1.43m

Step 2: Determine the distance from speaker 1 to the point of destructive interference

The distance from speaker 1 to the point of destructive interference, d = λ / 2 + kλ where k = 0, 1, 2, 3, ...

The smallest value for k is 0, so d = λ / 2 = 1.43 / 2 = 0.715m

Step 3: Calculate the distance from speaker 2 to the point of destructive interference

Since we want to know the minimum distance to speaker 2 for there to be destructive interference at that spot, we need to find the distance that is one-half wavelength more than the distance from speaker 1 to the point of destructive interference.d2 = d + λ / 2 = 0.715 + 1.43 / 2 = 1.145m

Therefore, the minimum distance to speaker 2 for there to be destructive interference at that spot is 1.145 meters.

For more questions on destructive interference

https://brainly.com/question/3698369

#SPJ8

The time a beam of light takes to travel from the sun to the Earth is 4.987 × 10²s. Therefore, m is equal to 4.987, and n is equal to 2.

The time it takes for a beam of light to get from the Sun to the Earth is determined by the formula:

Time = Distance / Speed of light;

Speed of light is 3.0 × 10⁸ m/s, and the distance from the sun to the Earth is 93,000,000 miles, which is equivalent to 1.496 × 10¹¹ meters.

The time it takes light to travel from the sun to Earth can be computed as follows:

Time = Distance / Speed of light

Time = (1.496 × 10¹¹ m) / (3.0 × 10⁸ m/s)

Time = (1.496 / 3.0) × 10³ s

Time = 0.4987 × 10³ s

Time = 4.987 × 10² s.

The time it takes for light to travel from the sun to the Earth is 4.987 × 10² s. Therefore, m is equal to 4.987, and n is equal to 2.

For more such questions on light visit:

https://brainly.com/question/30466268

#SPJ8