A cart carrying a brick is pulled up an inclined plane. At what point does the cart have the LEAST amount of potential energy? Check photo to see answer choices.

Explanation:

We need to use the first law of thermodynamics, which states that the change in internal energy (ΔU) of a system is equal to the heat (q) added to the system minus the work (w) done by the system:

ΔU = q - w

First, we need to convert the units of work from kcal to kJ:

375 kcal × 4.184 J/kcal = 1570.5 J = 1.5705 kJ

Now we can plug in the values we have:

ΔU = (5.00×10² kJ) - (1.5705 kJ)

ΔU = 498.4295 kJ

Therefore, the change in internal energy of the system is ΔU = 498.4295 kJ.

The total pressure after the valve is opened and the gases mix is 6.875 kPa

What is ideal gas law?

The ideal gas law is a fundamental equation in physics and chemistry that relates the pressure, volume, temperature, and number of molecules of an ideal gas. The equation is expressed mathematically as:

PV = nRT

To find the total pressure after the valve is opened and the gases mix, we can use the ideal gas law, which states:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. Assuming the temperature is constant and the gases behave ideally, we can write:

(P₁V₁+ P₂V₂) / (V₁+ V₂) = Ptotal

where P1 and V1 are the pressure and volume of the oxygen, P2 and V2 are the pressure and volume of the helium, and Ptotal is the total pressure after the valve is opened.

Plugging in the values, we get:

(P₁V1+ P₂V₂) / (V₁+ V₂) = Ptotal

((10kpa)(3L) + (5kpa)(5L)) / (3L + 5L) = Ptotal

(30kpa + 25kpa) / 8L = Ptotal

55kpa / 8L = Ptotal

Therefore, the total pressure after the valve is opened and the gases mix is 6.875 kPa (rounded to three significant figures).

To know more about chemical balancing visit :-

https://brainly.com/question/11904811

#SPJ9

The final temperature of the water is 100°C - 63.4°C = 36.6°C. Temperature can affect the physical and chemical properties of substances, including their volume, pressure, and reactivity.

What is Temperature?

Temperature is a measure of the average kinetic energy of the particles in a substance. In other words, it is a measure of how hot or cold a substance is. Temperature is usually measured in units of degrees Celsius (°C) or degrees Fahrenheit (°F), or Kelvin (K) in the scientific context. The Celsius and Fahrenheit scales are based on the freezing and boiling points of water, while the Kelvin scale is based on the absolute zero point where all molecular motion ceases.

q = m·C·ΔT

where q is the heat transferred, m is the mass of the substance, C is the specific heat capacity, and ΔT is the change in temperature.

First, we need to determine the initial temperature of the water. We know that the water vapor is at 100°C, which is also the boiling point of water at standard pressure. Therefore, we can assume that the water vapor is in equilibrium with liquid water at 100°C. The heat required to convert 55.0 g of water at 100°C into water vapor at 100°C can be calculated as follows:

q1 = m·ΔHv

q1 = 55.0 g · 2257 J/g = 124,135 J

This means that 124,135 J of heat were absorbed by the water to vaporize it at 100°C.

Next, we need to determine the amount of heat that is removed from the water vapor. We know that 144 kJ of energy were removed from the water vapor. This can be converted to joules as follows:

q2 = 144 kJ · 1000 J/kJ = 144,000 J

Now, we can use the equation to find the final temperature of the water:

q1 + q2 = m·C·ΔT

where ΔT is the change in temperature, which is what we want to find.

First, we need to determine the total mass of the water vapor and liquid water:

m = 55.0 g + 124,135 J / 2257 J/g = 108.3 g

Next, we need to determine the specific heat capacity of water at constant pressure. This is approximately 4.18 J/g·°C.

Now we can substitute these values into the equation and solve for ΔT:

144,135 J + 144,000 J = 108.3 g · 4.18 J/g·°C · ΔT

ΔT = (144,135 J + 144,000 J) / (108.3 g · 4.18 J/g·°C) = 63.4°C

Therefore, the final temperature of the water is 100°C - 63.4°C = 36.6°C.

Learn more about Temperature from given link

https://brainly.com/question/25677592

#SPJ1

Answer:

3,272,000

Explanation:

Find the number of molecules in 3.72 mol of sulfur dioxide: There are 78.54 g of nitrogen dioxide in 3.72 mol of sulfur dioxide, so there are 3,272,000 molecules in 3.72 mol of sulfur dioxide.

The height of the parallelogram-shaped pattern block is 25 mm.

The formula to find the area (A) of a parallelogram is A = base x height.

In the given parallelogram-shaped pattern block, we are given the area A = 525 mm² and the base b = 21 mm (assuming the base is the bottom side of the parallelogram).

Using the formula, we can rearrange it to solve for the height h:

A = base x height

=> h = A / base

Substituting the given values, we get:

h = 525 mm² / 21 mm

h = 25 mm

Therefore, the height of the parallelogram-shaped pattern block is 25 mm using A = base x height.

Learn more about height below.

https://brainly.com/question/73194

#SPJ1

The height of the parallelogram-shaped pattern block can be calculated using the formula:

Area of parallelogram = base x height

We know that the area of the parallelogram is A=525 mm² and the base is 21 mm. We can rearrange the formula and solve for the height:

height = A / base

height = 525 mm² / 21 mm

height ≈ 25 mm

Therefore, the height of the parallelogram-shaped pattern block is approximately 25 mm.

Learn more about parallelogram from

https://brainly.com/question/28693431

#SPJ1

Answer: Both are Chemical changes.

Explanation: When you bake a cookie, you start out with a mixture of ingredients. These can include substances such as Baking Soda. When high heat is applied to Baking Soda, it starts to break down into Carbon Dioxide. This is an example of a chemical change because a new substance is formed. Proteins also break down at high heat in an oven resulting in a chemical change.

For the second change, a chemical reaction might help you visualize what's going on. 3 Ag2S(s) + 2 Al(s) ---> 6 Ag(s) + Al2S3(s) is the reaction that's occuring. We can clearly see that the products are different substances than the reactants indicating a chemical change.

To review, chemical changes are changes that result in the alteration of the structure of a substance which leads to the production of a new substance.

Hope this helps!

Hydroiodic acid - HI

Chloric acid - HClO3

Nitrous acid - HNO2

H2CO3 - Carbonic acid

HClO4 - Perchloric Acid

CH3COOH - Acetic acid

The name of a chemical compound is typically determined by its chemical formula and the rules of nomenclature, which provide a systematic way of naming compounds based on their composition and structure.

The name of an ionic compound is usually composed of the name of the cation followed by the name of the anion. The cation is typically named first and is usually the name of the metal element or the polyatomic ion.

Learn more about chemical compound:https://brainly.com/question/12166462

#SPJ1

If 25.82 mL of 0.0500 M NaOH solution are required to reach the equivalence point of an acid-base titration of 40.0 mL of 7-Up, the number of NaOH required is 0.00126 moles.

The point at which chemically identical amounts of reactants are put together is known as the equivalence point in a chemical reaction.

In other words, during titration, it is the point at which the titrant addition is sufficient to totally neutralize the analyte solution. The number of moles of a solution with an unknown concentration is equal to the number of moles of a titrant, or standard solution. Because it is a point where the amount of acid and base required to neutralize a solution is equal, it is often referred to as the stoichiometric point. It should be noted that the acid to base ratio need not be 1:1. The balanced acid-base chemical equation explains this acid-base ratio. For this, indicators might be used, for example, phenolphthalein or methyl orange.

The reaction between citric acid and NaOH is,

H₃C₆H₅O₇(aq) + 3NaOH(aq) →   Na₃C₆H₅O₇(aq) + 3H₂O(l)

According to the formula,

M = [tex]\frac{n}{V}[/tex]

where,

M is the molarity,

n is the number of moles and,

V is the volume(L)

For NaOH;

M = 0.0500 M

V = 25.82ml = 0.02582 l

n = M × V

n = 0.00126 moles

To know more about acid-base titration, visit;

https://brainly.com/question/2728613

#SPJ1

Thus, the mass of  carbon dioxide created is 66.02 g, while the volume of water produced was 27.03 g.

Many health impacts from CO2 exposure may occur. These symptoms could include a coma, hypoxia, convulsions, sweating, disorientation, restlessness, a tingling and pins-and-needles sensation, difficulty breathing, fatigue, increased heart rate, and high blood pressure.

Through inhalation, CO2 is regarded as having low toxicity. CO2 behaves like a basic asphyxiant, which is what causes the majority of its negative health impacts. A gas known as a simple asphyxiant lowers or replaces the typical oxygen in breathing air. Headache and sleepiness are two signs of modest CO2 exposure.

To know more about carbon dioxide visit:

https://brainly.com/question/3049557

#SPJ1

The final temperature of the water and zinc mixture is 22.8◦C.

The principle of conservation of energy is a fundamental law of physics that states that the total energy of an isolated system remains constant over time. This means that energy cannot be created or destroyed; rather, it can only be transformed from one form to another. In other words, the total amount of energy in a system remains constant, even though it may change form or be transferred from one object to another.

This principle is a consequence of the laws of physics, and it applies to all natural processes. It is a fundamental principle of thermodynamics, which is the branch of physics that deals with the relationship between heat, energy, and work. According to this principle, energy can be converted from one form to another, such as from thermal energy to kinetic energy, but the total amount of energy in the system remains constant.

To solve this problem, we can use the principle of conservation of energy, which states that the total energy in a closed system remains constant. The energy gained by one object must be equal to the energy lost by the other object.

Let T be the final temperature of the water and zinc mixture. Then, the energy gained by the zinc is:

Q1 = mcΔT1

where m is the mass of the zinc, c is its specific heat capacity, and ΔT1 is the change in temperature of the zinc, given by:

ΔT1 = T - 66

The energy lost by the water is:

Q2 = mcΔT2

where m is the mass of the water, c is its specific heat capacity, and ΔT2 is the change in temperature of the water, given by:

ΔT2 = T - 17

According to the principle of conservation of energy, Q1 = Q2. Therefore, we have:

mcΔT1 = mcΔT2

Simplifying and solving for T, we get:

T = (mcΔT2 + 66cΔT1)/(mc)

Plugging in the given values, we get:

T = (39 kg x 4180 J/kg·◦C x (T - 17◦C) + 15 kg x 388 J/kg·◦C x (T - 66◦C))/(39 kg x 4180 J/kg·◦C + 15 kg x 388 J/kg·◦C)

Simplifying and solving for T, we get:

T = 22.8◦C

To know more about isolated system, visit:

https://brainly.com/question/30079145

#SPJ1

The following chemical equation can represent the reaction:

Mg (s) + FeSO4 (aq) → MgSO4 (aq) + Fe (s)

In this reaction, the magnesium metal (Mg) replaces the iron (Fe) in the iron (II) sulfate (FeSO4) solution to form magnesium sulfate (MgSO4) and elemental iron (Fe). This is an example of a single displacement or substitution reaction, where one element replaces another element in a compound.

A catalyst is a substance that increases the rate of a chemical reaction by lowering the activation energy required for the reaction to occur. Catalysts provide an alternative pathway for the reaction that requires less energy to reach the desired products.

Examples of catalysts include enzymes, which are biological catalysts involved in many biochemical reactions in living organisms, and transition metal complexes, commonly used in industrial chemical reactions.

To learn more about pH, visit here:

https://brainly.com/question/15289741

#SPJ1

Mass of potassium nitrate is needed to generate 215.0 L of gas, composed of 111.0 L of N₂ and 104.0 L of O₂ at 0.920 atm and 291 K, using these two reactions is 1186.75 g.

Potassium nitrate is a crystalline (sand-like), clear, white, or colorless powder or solid with a salty, pungent flavor. It is employed in the production of glass, rocket fuel, fireworks, fertilizer, explosives, and matches. Due to DOT's citation, potassium nitrate is included on the Hazardous Substance List.

The reactions are :

2KNO₃ --->  2KNO₂  +  O₂

4KNO₂  ---->  2K₂O  + 3O₂  +  2N₂

Therefore,

4KNO₃  ---->  2K₂O  +   5O₂  +  2N₂

using the formula:

PV = nRT

moles of N₂ = PV / RT

P = 0.920 atm

T =287 K

R = 0.082 Latm/mol/k

moles of N₂ = 4.279 mol

moles of O₂ = (0.92 × 134) / 0.082 × 287 = 123.28 / 23.534

                    = 5.24 mol

from the equation .

moles of potassium nitrate to produce nitrogen = 2 × 4.279

                                                                                = 8.55 mol

moles of nitrate tp produce oxygen = (4 / 5) × 4

                                                            = 3.2 mol

total moles of nitrate = 8.55 mol + 3.2 mol

                                   = 11.75 mol

mass of potassium nitrate = number of moles × molar mass

                                            = 11.75 × 101

                                             = 1186.75 g

To learn more about moles here

brainly.com/question/20486415

#SPJ1

Answer:

Static Electricity

Explanation:

The shock that you feel when your body fills with extra electrons and you touch a good conductor is an example of static electricity, not an electrical current.

Static electricity is an imbalance of electric charges within or on the surface of a material. When two objects with different electric charges come into contact, such as your body and a good conductor, electrons can transfer from one object to another, resulting in a buildup of static electricity. When the electrical potential difference between the two objects becomes high enough, the electrons can jump across the gap in the form of a spark, creating a sudden discharge of static electricity, or shock.

In contrast, an electrical current is a continuous flow of electric charge through a conductor, such as a wire. Electrical currents are typically created by the movement of electrons or ions, and they are the basis for most forms of electrical energy and power.

So, the shock that you feel when your body fills with extra electrons and you touch a good conductor is an example of static electricity because it involves a buildup of electric charge that is released suddenly in the form of a spark or shock.

The exponent to the power of 0 would be the correct answer in this situation.

Initial rate is the rate of reaction at the beginning of a chemical reaction. It is usually measured at the start of the reaction and is usually higher than the rate at equilibrium. The initial rate is an important factor in determining the rate of reaction and the products of the reaction. It can be used to determine the effects of various factors such as temperature, pressure, and concentration on the reaction rate.

Exponents represent the number of times the base number is multiplied by itself. So, if the rate does not double nor stay the same, then it is not being multiplied by itself, so the exponent would be to the power of 0.

Exponentiation can be used to show how many times a number is multiplied by itself, and this is done by raising the base number to a certain power. For example, 4 to the power of 3 means 4 x 4 x 4 = 64. In this case, the exponent is 3.

If the initial rate does not double nor stay the same, then the power associated with the exponent would be 0. This is because the rate is not being multiplied by itself, so it would not be associated with any power. Therefore, the exponent would be to the power of 0.

To know more about the initial rate click-
https://brainly.com/question/16040265
#SPJ1

5. 4.00 moles of O2 can react to produce 4.00 moles of CO2.

What is the relationship between moles of O2 and moles of CO2?

According to the balanced chemical equation, the ratio of moles of O2 to moles of CO2 is 2:1, which means that 4 moles of O2 would react with 2 moles of CH4 to produce 2 moles of CO2. Therefore, statement 5 is true.

To learn more about moles the link:

https://brainly.com/question/24191825

#SPJ1

The balanced chemical equation for the reaction is: Fe(s) + 2CuCl2(aq) → 2FeCl3(aq) + Cu(s)

The equation shows that one mole of solid iron reacts with two moles of aqueous copper(II) chloride to produce two moles of aqueous iron(III) chloride and one mole of solid copper.

To balance the equation, we need to ensure that the number of atoms of each element is the same on both sides of the equation. Here's how we balance the equation:

Fe(s) + 2CuCl2(aq) → 2FeCl3(aq) + Cu(s)

On the left-hand side, we have one iron atom (Fe) and two copper atoms (Cu). On the right-hand side, we have two iron atoms (Fe) and one copper atom (Cu). To balance the iron atoms, we add a coefficient of 2 in front of Fe(s) on the left-hand side:

2Fe(s) + 2CuCl2(aq) → 2FeCl3(aq) + Cu(s)

Now we have two iron atoms on both sides. However, we also have four chloride ions (Cl-) on the left-hand side and six chloride ions on the right-hand side. To balance the chloride ions, we add a coefficient of 3 in front of CuCl2(aq) on the left-hand side:

2Fe(s) + 3CuCl2(aq) → 2FeCl3(aq) + Cu(s)

Now we have two iron atoms, six chloride ions, two copper ions (Cu2+), and one copper atom on both sides. The equation is balanced!

Learn more about balanced chemical equation here: https://brainly.com/question/11904811

#SPJ1

According to the question 88.4 grams of carbon dioxide must form.

Carbon dioxide is a colorless, odorless, non-toxic gas composed of two oxygen atoms and one carbon atom. It is a natural component of Earth's atmosphere and is produced through natural processes such as respiration and combustion. It is also produced artificially through processes such as burning fossil fuels and manufacturing. Carbon dioxide plays an important role in regulating the Earth's climate.

The reaction equation for the formation of carbon dioxide is:

C (graphite) + O2 → CO2

To find the amount of carbon dioxide that must form, we must multiply the number of moles of carbon (graphite) by the molar mass of carbon dioxide (44.01 g/mol).

25.0 g C × (1 mol C / 12.01 g C) × (44.01 g CO2 / 1 mol CO2) = 88.4 g CO2

Therefore, 88.4 grams of carbon dioxide must form.

To learn more about carbon dioxide

https://brainly.com/question/25385913

#SPJ1

The theoretical yield of AlCl₃ is 28.65g and percentage yield is 33.15%.

What is yield of a reaction?

In chemistry, yield, also referred to as reaction yield, is a measure of the quantity of moles of a product formed in relation to the reactant consumed, obtained in a chemical reaction, usually expressed as a percentage.

Theoretical yield of a reaction is calculated assuming that there is no error in the reaction procedure. Percentage yield can be calculated by the formula-

%Yield =  (Actual yield ÷ theoretical yield) ×100

Given,

Mass of Al(OH)₃ = 50.3g

According to reaction given,

78g Al(OH)₃ gives - 44.44g AlCl₃

1g Al(OH)₃ gives - 0.56g AlCl₃

Then, 50.3g Al(OH)₃ gives - 0.56×50.3 = 28.65g AlCl₃

%Yield = (9.5÷28.65) × 100

Therefore, the theoretical yield of AlCl₃ is 28.65g and percentage yield is 33.15%.

Learn more about yield, here:

https://brainly.com/question/30700754

#SPJ1

The energy, size, orientation, or spin of an electron within an atom are all described by quantum numbers. When giving these quantum numbers values, specific guidelines and limitations must be followed.

There are a collection of four quantum numbers in atoms: the main quantum number (n), its orbital rotational inertia fractional number (l), the spin quantum number (mm), and the electron quantum number (ms = +1/2).

This collection of complex numbers is permitted since the primary quantum number, n = 3, the azimuthal fractional number, l = 1, the spin quantum amount, ml = -2, and the modulus, ms = +1/2, are all permissible values.

n=4, l=3, ml=-1, and ms=-1/2

This set set quantum numbers is permitted because the main quantum number, n, has a valid value of 4, the azimuthal fractional number, l, a valid value of 3, the spin quantum number, ml, a valid value of 1, and the spin quantum number, ms, a valid value of -1/2.

To know more about quantum numbers visit:

https://brainly.com/question/18835321

#SPJ1

Mechanical energy spins a turbine, a turbine spins a magnet creating disturbances in a magnetic field, a magnetic field moves electrons in a conductor, electron creates a current of electricity are the steps to making electricity with a generator.

What is electric field ?

According to mathematics, the electric field is described as a vector field that may be connected to each point in space and represents the force per unit charge that is applied to a positive test charge that is at rest at that location. Either the electric charge or time-varying magnetic fields can produce an electric field.

What is energy?

The capacity to work comes from energy. Energy types include chemical, nuclear, and electrical energy. Science and engineering both depend on the idea of energy. Here is a look at the classification of energy as well as its description and examples.

Therefore, Mechanical energy spins a turbine, a turbine spins a magnet creating disturbances in a magnetic field, a magnetic field moves electrons in a conductor, electron creates a current of electricity re the steps to making electricity with a generator.

Learn more about electric field  from the given link.

https://brainly.com/question/19878202

#SPJ1

Answer:

The correct order of the steps to making electricity with a generator is:

First, mechanical energy is used to spin a turbine, which is typically connected to a magnet. As the turbine spins the magnet, it creates disturbances in a magnetic field. These disturbances then cause the magnetic field to move electrons in a nearby conductor, such as a wire. This movement of electrons creates a flow of electrical current through the wire, which can be used to power various devices. Therefore, the final step is the production of electricity, as electrons flow through the conductor and create a current of electricity.

The rate of diffusion of two gases is 7 cm³/sec and 35 cm³/sec respectively.

The rate of diffusion is the amount of gas passing through the an area in unit time.

The diffusion rate depends on several factors:

Given,

Volume of first gas = 280 cm³

Time of first gas = 40 seconds

Volume of second gas = 350 cm³

Rime of second gas = 10 seconds

Rate of diffusion = volume of gas diffused ÷ time

Rate for first gas = 280 ÷ 40

                            = 7 cm³/sec

Rate of second gas = 350 ÷ 10

                                 =  35 cm³/sec

Therefore, The rate of diffusion of two gases is 7 cm³/sec and 35 cm³/sec respectively.

Learn more about Rate of diffusion, here:

https://brainly.com/question/30697046

#SPJ9

Answer:

When salt is mixed with water, the salt dissolves because the covalent bonds of water are stronger than the ionic bonds in the salt molecules.

Explanation:

its like cotton candy in water

AWater can dissolve salt because the positive part of water molecules attracts the negative chloride ions and the negative part of water molecules attracts the positive sodium ions. The amount of a substance that can dissolve in a liquid (at a particular temperature) is called the solubility of the substance

Explanation:

The correct answers are given below, based on the given prompt:

Nickel as it is not an element in amoxicillin's molecular structure. Amoxicillin is a molecule composed of carbon, hydrogen, nitrogen, oxygen, and sulfur atoms.

The correct answer is Removing a green coating from copper coin with steel wool as it involves a chemical reaction where the green coating (copper oxide) is being reduced to copper metal by the iron in the steel wool.

The volume of water displaced by the copper sample is equal to the volume of the sample.

Using the density of copper (8.96 g/mL), the volume of the copper sample can be calculated as 183.4 g / 8.96 g/mL = 20.46 mL.

Thus, the new volume reading in the graduate cylinder is 35.4 mL + 20.46 mL = 55.86 mL or 56.0 mL (rounded to the nearest tenth).

Read more about atoms here:

https://brainly.com/question/6258301

#SPJ1

An ionic equation for sodium hydroxide and calcium carbonate is Na⁺ + OH⁻ + Ca²⁺ + CO₃²⁻[tex]\rightarrow[/tex]Na⁺ +CO₃²⁻ + Ca²⁺ + OH⁻.

Ionic equation is defined as a chemical equation which represents electrolytes in aqueous solutions and are expressed as dissociated ions. Ions present in aqueous solutions are stabilized by ion dipole interactions with the water molecules which are present.

An ionic equation can be written for any electrolyte which dissociates and reacts with the polar solvent. In a balanced ionic equation , number and type of atoms on each sides of reaction arrow are same. Even the net charge on both sides of the arrow is same.

Learn more about ionic equation,here:

https://brainly.com/question/15466794

#SPJ9

As per  the distance time graph object A is moving at variable speed but Object B is moving at constant speed.

The speed (commonly referred to as v) of an object is the magnitude of the change of its position over time or the magnitude of the change of its position per unit of time; it is thus a scalar quantity. The average speed of an object in an interval of time is the distance travelled by the object divided by the duration of the interval;the instantaneous speed is the limit of the average speed as the duration of the time interval approaches zero. Speed is not the same as velocity.

Speed has the dimensions of distance divided by time. The SI unit of speed is the metre per second (m/s), but the most common unit of speed in everyday usage is the kilometre per hour (km/h) or, miles per hour (mph).

Learn more about speed,here:

https://brainly.com/question/17661499

#SPJ1

Thus, in order to make 0.075 mol of water, 0.0375 moles or ammonium perchlorate are required.

Perchlorate can be purchased by any qualified specialists who plan to utilize the substance legally. Since this molecule and all of its derivatives are compounds requiring extremely professional expertise in handling, the procurement and handling of item must be subject to a number of laws.

An odorless, white, dust powder known as ammonium perchlorate. As an etching and etching agent, it is employed in analytical chemistry. Moreover, it is utilized in explosives and for animal fattening. According to DOT and NFPA citations, ammonium perchlorate is listed as a hazardous substance.

To know more about ammonium perchlorate visit;

https://brainly.com/question/15124901

#SPJ1

Answer:

The first step is to convert the given mass of HCl to moles:

moles of HCl = mass of HCl / molar mass of HCl

moles of HCl = 7.68 g / 36.46 g/mol

moles of HCl = 0.2103 mol

Next, we need to convert the given volume of solution to liters:

volume of solution = 253 mL = 0.253 L

Now we can calculate the molarity of the solution:

molarity = moles of solute / volume of solution

molarity = 0.2103 mol / 0.253 L

molarity = 0.831 M

Therefore, the molarity of the HCl solution is 0.831 M.

Explanation:

The percent yield for this reaction of oxygen with Iron, would be 73. 2 %.

The percentage yield in a reaction can be found by the formula :

= Actual yield / Theoretical yield x 100 %

Theoretical yield of iron (III) oxide = 12.3 g

Actual yield of iron (III) oxide = 9.00 g

The percentage yield is therefore ;

= 9. 00 / 12. 3 x 100 %

= 0.732 x 100 %

= 73. 2 %

In conclusion, the percent yield is 73. 2 %.

Find out more on percentage yield at https://brainly.com/question/14714924

#SPJ1