Answer:
p = 16,800
Explanation:
Which point on the standing wave is a node?
The point on the standing wave which is referred to as a node is point B and is denoted as option B.
What is Standing wave?This is also called stationary wave and it is referred to as a combination of two waves moving in opposite directions, each having the same amplitude and frequency.
A node is referred to as a point along a standing wave where the wave has minimum amplitude which is therefore denoted as point B in the graph given below.
Read more about Amplitude here https://brainly.com/question/19036728
#SPJ1
Speed and time play a major factor in:
Scrimmage
Tactical movement
Situation awareness
Drill
Answer:
Tactical movement
Explanation:
Speed and time play a significant factor in Tactical movement. The correct option is B.
What is a Tactical movement?Tactical movement refers to the coordinated and strategic movement of military units or teams to achieve a specific objective. It is a fundamental aspect of military operations and involves the use of various tactics and techniques to move troops and equipment safely and efficiently on the battlefield.
Tactical movement can involve various modes of transportation, such as on foot, in vehicles, or by air. It also involves the use of cover and concealment to avoid detection by the enemy, and the use of communication and signal systems to coordinate movements and maintain situational awareness.
The success of the tactical movement depends on many factors, including the terrain and weather conditions, the size and composition of the units involved, the available resources and equipment, and the tactics and strategies employed by both friendly and enemy forces. It requires careful planning, training, and execution to ensure that the movement is successful and achieves the desired outcome.So, tactical movement is an essential component of military operations, and plays a critical role in achieving victory on the battlefield.
Here in the Question,
Tactical movement refers to the movement of military units or teams in a coordinated and strategic manner to achieve a specific objective. In such movements, speed and time are critical factors because they determine the success or failure of the mission. The speed of movement can help to surprise the enemy, take advantage of a weakness in their defense, or seize a key position before they can respond. Time is also important because the longer it takes to achieve the objective, the more likely the enemy is to detect and counter the movement. Therefore, tactical movement requires careful planning and execution to ensure that the right units move at the right speed and at the right time to achieve the desired outcome.
Therefore, the correct option is B i.e Tactical movement.
To learn about Kinetic energy click:
https://brainly.com/question/26472013
#SPJ2
List the two factors that create orbital motion and describe how each factor affects the motion.
Answer:
The forward motion of a body in space, such as a planet or moon, and the pull of gravity on it from another body in space.
Explanation:
Earth and many other bodies—including asteroids, comets, and the other planets—move around the sun in curved paths called orbits. Generally, the orbits are elliptical, or oval, in shape. Because of the sun’s relatively strong gravity, Earth and the other bodies constantly fall toward the sun, but they stay far enough away from the sun because of their forward velocity to fall around the sun instead of into it. As a result, they keep orbiting the sun and never crash to its surface. The motion of Earth and the other bodies around the sun is called orbital motion. Orbital motion occurs whenever an object is moving forward and at the same time is pulled by gravity toward another object.
1. Swordfish are capable of stunning output power for short bursts. A 650 kg swordfish has a cross-sectional area of 0.92 m2 and a drag coefficient of 0.0091- very low due to some evolutionary adaptations. Such a fish can sustain a speed of 30 m/s for a few seconds. Assume seawater has a density of 1026 kg/m3. a) How much power does the fish need to put out for motion at this high speed
Answer:
[tex]P_{sp}=178.4W/kg[/tex]
Explanation:
From the question we are told that:
Mass of fish [tex]m_f=650kg[/tex]
Cross-sectional area [tex]A=0.92 m^2[/tex]
Drag coefficient of [tex]\mu= 0.0091[/tex]
Seawater density [tex]\rho= 1026 kg/m^3.[/tex]
Speed of Fish [tex]v=30 m/s[/tex]
Generally the equation for Drag force F_d is mathematically given by
[tex]F_d = \mu * \rho *A v^2 /2[/tex]
[tex]F_d = 0.0091* 0.92* 1026* 30^2/2 \\F_d= 3865. 35 N[/tex]
Generally the equation for high speed Power [tex]P_{sp}[/tex] is mathematically given by
[tex]P_{sp}=3865*35*\frac{v}{m_f}[/tex]
[tex]P_{sp}=F_d*35*\frac{30}{650}[/tex]
[tex]P_{sp}=178.4W/kg[/tex]
formula for inertia speed
Answer:
The equation of momentum for a linear system is simply P = mv where P = momentum (kg·m/sec or lb·ft/sec); m = mass (kg or lb); and v = velocity (m/s or ft/sec). ... By reducing her inertia (I = mr2 where r has been decreased) her angular velocity, ω, must increase in order for the angular momentum to remain constant.
https://www.gstatic.com/education/formulas2/355397047/en/moment_of_inertia.svg
hope this helps?
Explanation:
12. A glass plate 1 cm thick, of refractive index 1.50, is placed
between a point source of light of wave length 6000 Å and a
screen. The distance from the source to the screen is 4 cm.
How many waves are there between the source and the
screen?
Answer:
7
Explanation:
The light travels a total of 4 cm to the screen, of that, 3 cm is in air and 1 cm is in the glass plate.
The total number of wavelengths of light between the source and screen is just the number of wavelengths in air plus the number in the glass.
To determine the number of wavelengths in air, divide the thickness of air (3 cm) by the wavelength of the light (6000 Angstroms), converting units as needed.
The refractive index of the glass is 1.5. That means that the velocity of propagation of the light in the glass is 2/3 of what it is in air, and so the wavelength of the light in glass is 2/3 of what it is in air. So, divide the thickness of glass (1 cm) by the wavelength of the light in glass (6000 * 2/3).
Add the two values for the final answer
Which elements are not noble gases?
Answer:
All the elements except for the ones on the last column (at the left of the periodic table)
Explanation:
Two masses are connected by a string which passes over a pulley with negligible mass and friction. One mass hangs vertically and one mass slides on a horizontal surface. The horizontal surface has a coefficient of kinetic friction of 0.200. The vertically hanging mass is 3.00 kg and the mass on the horizontal surface is 3.00 kg. The magnitude of the acceleration of the vertically hanging mass is (the initial velocity of the horizontal mass is to the right)
Answer:
[tex]a=2,5m/s^2[/tex]
Explanation:
From the question we are told that:
Coefficient of kinetic friction [tex]\mu= 0.200[/tex]
Vertical Mass [tex]M_v=3kg[/tex]
Horizontal mass [tex]M_h=3.00kg[/tex]
Generally the equation for kinetic force [tex]F_k[/tex] is mathematically given by
[tex]F_k=\mu N\\F_k=0.2*3\\F_k=0.6[/tex]
Generally the equation for T is mathematically given by
[tex]For M_v=3kg3g-T=3a[/tex]
For [tex]M_h=3kg[/tex]
[tex]T=M_v V+F_k\\T=3.0a+0.6[/tex]
Therefore substituting
[tex]3-3a-0.6=3a\\2.4g=6a[/tex]
[tex]a=2,5m/s^2[/tex]
A disk of radius 25 cm spinning at a rate of 30 rpm slows to a stop over 3 seconds. What is the angular acceleration? B. How many radians did the disk turn while stopping ? C. how many revolutions?
Answer:
A. The angular acceleration of the disk is -1.047 radians per square second.
B. The disk turns 4.715 radians while stopping.
C. The disk did 0.750 revolutions while stopping.
Explanation:
A. In this case, the disk is deceleration at a constant rate. Hence, the angular acceleration experimented by the object ([tex]\alpha[/tex]), in radians per square second, can be found by means of this kinematic expression:
[tex]\alpha = \frac{\omega-\omega_{o}}{t}[/tex] (1)
Where:
[tex]\omega_{o}[/tex] - Initial angular speed, in radians per second.
[tex]\omega[/tex] - Final angular speed, in radians per second.
[tex]t[/tex] - Time, in seconds.
If we know that [tex]\omega_{o} \approx 3.142\,\frac{rad}{s}[/tex], [tex]\omega = 0\,\frac{rad}{s}[/tex] and [tex]t = 3\,s[/tex], then the angular acceleration of the disk is:
[tex]\alpha = \frac{\omega-\omega_{o}}{t}[/tex]
[tex]\alpha = -1.047\,\frac{rad}{s^{2}}[/tex]
The angular acceleration of the disk is -1.047 radians per square second.
B. The change in position of the disk ([tex]\Delta \theta[/tex]), in radians, is determined by the following kinematic formula:
[tex]\Delta \theta = \frac{\omega^{2}-\omega_{o}^{2}}{2\cdot \alpha}[/tex] (2)
If we know that [tex]\omega_{o} \approx 3.142\,\frac{rad}{s}[/tex], [tex]\omega = 0\,\frac{rad}{s}[/tex] and [tex]\alpha = -1.047\,\frac{rad}{s^{2}}[/tex], then the change in position is:
[tex]\Delta \theta = \frac{\omega^{2}-\omega_{o}^{2}}{2\cdot \alpha}[/tex]
[tex]\Delta \theta = 4.715\,rad[/tex]
The disk turns 4.715 radians while stopping.
C. A revolution equals 2π radians, then, then number of revolutions done by the disk while stopping is found by simple rule of three:
[tex]\Delta \theta = 4.715\,rad \times \frac{1\,rev}{2\pi\, rad}[/tex]
[tex]\Delta \theta = 0.750\,rev[/tex]
The disk did 0.750 revolutions while stopping.
• What value is used to identify each element in the periodic table?
Answer:
protons
Explanation:
From fastest to slowest, which of the following lists describes the speed at which sound tends to travel in different materials?
A. Gases, solids, liquids
B. Gases, liquids, solids
C. Solids, liquids, gases
D. Solids, gases, liquids
Answer:
C. Solids,Liquids, Gases
explain why a diver at the bottom of the sea feels more pressure than one who is swimming on the surface of water
Answer:
the deeper into the ocean you go, the more pressure is exerted on you
Explanation:
1. An atom that loses electrons has a ________________________ charge and an atom that gains
electrons has a ___________________________ charge.
Charged atoms are called ___________________.
2. What is an insulator? Give 4 examples.
3. What is a conductor? Give an example.
4. How can we move electrons from one place to another? What actually causes the electrons to
move?
5. Static electricity is ______________________________________________________________________
_______________________________________________________________________________________
6. Explain the attraction and repulsion of charges.
7. Why does a balloon stick to the wall?
8. Why does your hair stand up when you take off your hat?
9. Why do you get a shock when you walk across a carpet?
10. When is static electricity most noticeable and why?
11. State the Principle of Conservation of Charge.
12. The invisible electric force field around charged objects depends on __________________________,
__________________________, and _____________________________.
13. What is the relationship between the charges and the field strength?
What is the relationship between the field strength and the distance between the charges?
1. What is DC?
What is AC?
2. Name 3 ways to get DC.
3. What is an electrical circuit?
4. What is voltage?
What is current?
What is resistance?
What causes heat and light in a wire?
COPY THE TABLE comparing water in a hose-DC-units
5. Which electricity do we use in our homes?
CLICK ON ALTERNATING CURRENT
1. Explain AC.
2. Who invented the light bulb?
3. Who really invented AC?
4. Who discovered the advantages of AC over DC?
5. How is AC made?
6. What is the main advantage of AC over DC?
Which of these have a potential energy?
1. a coiled spring
2. a can of gasoline
3. a wrapped sandwich
4. a puddle of water
Answer:
coiled spring have a potential energy
Answer:
Which of these have a potential energy? A coiled spring.
Explanation:
Have a great day.
determine the total voltage in the circuit below the ammeter is reading 4 A
Answer:
6 V.
Explanation:
We'll begin by calculating the equivalent resistance of the circuit. This can be obtained as follow:
Resistor 1 (R₁) = 3 Ω
Resistor 2 (R₂) = 3 Ω
Equivalent Resistance (R) =?
Since the two resistor are in parallel connection, the equivalent resistance can be obtained as:
R = (R₁ × R₂) / (R₁ + R₂)
R = (3 × 3) / (3 + 3)
R = 9/6
R = 1.5 Ω
Finally, we shall determine the total voltage in the circuit. This can be obtained as follow:
Current (I) = 4 A
Equivalent Resistance (R) = 1.5 Ω
Total voltage (V) =?
V = IR
V = 4 × 1.5
V = 6 V
Thus, the total voltage in the circuit is 6 V
What does a Keystone species do for the environment?
The magnetic field due to a utility wire is 0.10 mT when you are at a distance of 10 meters from it. What current (in Amperes) flows through the wire?
Answer:
I = 5000 A
Explanation:
We will use Ampere's Law to calculate the current:
[tex]B = \frac{\mu I}{2\pi r}\\\\[/tex]
where,
B = Magnetic Field Strength = 0.1 mT = 1 x 10⁻⁴ T
μ = Permeability of Free Space = 4π x 10⁻⁷ N/A²
I = Current = ?
r = radius = 10 m
Therefore,
[tex]1\ x\ 10^{-4}\ T = \frac{(4\pi\ x\ 10^{-7}\ N/A^2)(I)}{2\pi(10\ m)}\\\\I = \frac{(1\ x\ 10^{-4}\ T)(2\pi (10\ m))}{4\pi\ x\ 10^{-7}\ N/A^2}[/tex]
I = 5000 A
2) __________ are chemical messengers produced by the endocrine system and released into the bloodstream.
BRAINLIEST!
NO FILE HOSTING LINKS!!!
Answer:
Hormones
Explanation:
The glands that make up the endocrine system produce chemical messengers called hormones that travel through the blood to other parts of the body. Important endocrine glands include the pituitary, thyroid, parathyroid, thymus, and adrenal glands
A disk of a radius 50 cm rotates at a constant rate of 100 rpm. What distance in meters will a point on the outside rim travel during 30 seconds of rotation?
Answer:
the distance in meters traveled by a point outside the rim is 157.1 m
Explanation:
Given;
radius of the disk, r = 50 cm = 0.5 m
angular speed of the disk, ω = 100 rpm
time of motion, t = 30 s
The distance in meters traveled by a point outside the rim is calculated as follows;
[tex]\theta = \omega t\\\\\theta = (100 \frac{rev}{\min} \times \frac{2\pi \ rad}{1 \ rev} \times \frac{1\min}{60 s} ) \times (30 s)\\\\\theta = 100 \pi \ rad\\\\d = \theta r\\\\d = 100\pi \ \times \ 0.5m\\\\d = 50 \pi \ m = 157.1 \ m[/tex]
Therefore, the distance in meters traveled by a point outside the rim is 157.1 m
Which statement best explains the difference between longitudinal and transverse waves?
A: Longitudinal waves have troughs, while transverse waves have crests.
B: Longitudinal waves transfer energy while transverse waves do not
C: Longitudinal waves produce energy, while transverse waves consume energy
D: Particles in longitudinal waves travel in the direction of the wave, while particles in transverse waves travel perpendicular to the wave.
pls put the letter in the answer
Answer:
the answer here would be A
The statement that best explains the difference between longitudinal and transverse waves is D: Particles in longitudinal waves travel in the direction of the wave, while particles in transverse waves travel perpendicular to the wave. The correct option is D.
What is a wave?A wave is a disturbance that propagates through space and time, transferring energy without transferring matter. Waves can be found in various forms, such as sound waves, light waves, and water waves.
A transverse wave is a type of wave where the particles of the medium vibrate perpendicular to the direction of wave propagation.
In other words, the motion of the particles is at right angles to the direction of the energy transfer. A common example of transverse waves is light waves.
A longitudinal wave is a type of wave where the particles of the medium vibrate parallel to the direction of wave propagation. The motion of the particles is in the same direction as the energy transfer. An example of longitudinal waves is sound waves.
In a longitudinal wave, particles in the medium oscillate back and forth along the direction of the wave, creating areas of compression and rarefaction. In a transverse wave, particles in the medium oscillate up and down, creating crests and troughs.
Therefore, the correct statement is Particles in longitudinal waves travel in the direction of the wave, while particles in transverse waves travel perpendicular to the wave(D).
To know more about the amplitude of a wave click:
https://brainly.com/question/29775285
#SPJ3
Which statement correctly describes the organization of cells, tissues, organs, and organ systems within a human body?
A.
Specialized organs work together in organ systems to form cells that come together in tissues.
B.
Specialized cells work together in organs to form tissues that come together in organ systems.
C.
Specialized cells work together in tissues to form organs that come together in organ systems.
D.
Specialized tissues work together in organ systems to form cells that come together in organs.
A 5kg block rests on a 30° incline. The coefficient of static friction between the block and the incline is 0.20. How large a horizontal force must push on the block if the block is to be on the verge of sliding. a) up the incline, b) down the incline ?
Answer:
Hope It Help
Explanation:
That's all I know
8. Before leaving the ground an airplane traveling with constant acceleration makes a run on the
runway of 1800 meters in 12 seconds. Determine:
a. Acceleration
b. Speed at which it leaves the ground
c. Distance traveled during the first and twelfth seconds
Answer:
[tex]\color{Blue}\huge\boxed{Answer} [/tex]
B. Speed at which it leaves the groundWhy is this true? Why is this true? Photons of lower-frequency light don't have enough energy to eject an electron. The electric field of low-frequency light does not vibrate the electrons rapidly enough to eject them. The number of photons in low-frequency light is too small to eject electrons. Low-frequency light does not penetrate far enough into the metal to eject electrons. Request Answer
Answer:
the only correct answer is: Photons of lower-frequency light don't have enough energy to eject an electron
Explanation:
This question is in the model of the photoelectric effect, where some electrons are expelled from the metal by the action of a ray of light.
This effect was explained by Einstein supposes that the light rays are formed by photons and the energy of these photons is given by the Planco relation
K = h f - Ф
where K is the kinetic energy of the ejected electrons and Ф is the work function, it keeps the electrons inside the material.
When analyzing this expression there is a minimum frequency (threshold) for which K = 0
hf = Ф
Below this frequency the photons in the light beam do not have the energy to expel the electrons from the material.
Let's examine the answers
a) True. You agree with the above
b) False. The analysis is in terms of individual shock
c) False. The expulsion does not have to do with the number of photons but with the energy of each one
therefore the only correct answer is: Photons of lower-frequency light don't have enough energy to eject an electron
What process changes a liquid to a solid?
A. Evaporation
B. Melting
C. Adding heat
D. Freezing
Thank you!!!<3
Answer:
D. Freezing?
Explanation:
Get water, put it in the freezer, turns into ice after a few hours.
What structure is represented by the letter
C?
PLEASE HELP!!!!!
Choose 1 answer:
А
Lysosome
B
Nucleus
C
Vacuole
D
Mitochondria
if the root mean square speed of a gas particle is 200 m/s at a temperature of 400k, at what approximate temperature will urms when kelvin temperature equals 350 m/s
Answer:
The correct solution is "1230 K".
Explanation:
The given values are:
[tex](V_{rms})_1= 200 \ m/sec[/tex]
[tex](V_{rms})_2= 350 \ m/sec[/tex]
[tex]T_1=400 \ K[/tex]
As we know,
⇒ [tex]V_{rms} \propto \sqrt{T}[/tex]
or,
⇒ [tex]\frac{(V_{rms})_1}{(V_{rms})_2} =\sqrt{\frac{T_1}{T_2} }[/tex]
On substituting the values, we get
⇒ [tex]\frac{200}{350} =\sqrt{\frac{400}{T_2} }[/tex]
⇒ [tex]T_2=1230 \ K[/tex]
Solar panels convert _______ energy to ______ energy which can be used to heat water
Which type of force is needed to lift the weight?
A friction
B gravity
C pull
D push
b.gravity have a great day:)
What is the resistance force when you walk up an inclined plane?
Please help quick!
The resistance force which is the type of force that oppose the motion when we walk on an inclined plane is mgcos (-).
What is Resistance force?
A Resistance force is defined as a force that acts to oppose the motion or motion of an object that is an opposing force. Resistance force opposes the moving body to move in the opposite direction. Resistive force is described as the force, or the vector sum of several forces where the direction is opposite to the motion of a body is also called friction during sliding and/or rolling.
Some examples of resistive force are friction, where an object is held back from sliding on a surface, while another form of resistive force is fluid resistance in which the object is trying to plow through a fluid material.
Thus, the resistance force which is the type of force that oppose the motion when we walk on an inclined plane is mgcos (-).
Learn more about Resistance force, here:
https://brainly.com/question/2285158
#SPJ6