The acceleration of both bullets, neglecting air resistance, would be the same.
Hence, the correct answer is:
a. None of these (the acceleration is the same for both bullets)
When a bullet is dropped from the top of the Empire State Building or fired downward from the same location, the only significant force acting on both bullets is gravity.
In the absence of air resistance, the acceleration experienced by any object near the surface of the Earth is constant and equal to approximately 9.8 meters per second squared (m/s²), directed downward.
The mass of the bullets does not affect their acceleration due to gravity. This is known as the equivalence principle, which states that the gravitational acceleration experienced by an object is independent of its mass.
Therefore, regardless of their masses or initial velocities, both bullets would experience the same acceleration of 9.8 m/s² downward.
Hence, the correct answer is:
a. None of these (the acceleration is the same for both bullets)
Learn more about equivalence principle, here
https://brainly.com/question/32296932
#SPJ11
An emf is induced in a conducting loop of wire 1.03 Part A m long as its shape is changed from square to circular. Find the average magnitude of the induced emf if the change in shape occurs in 0.165 s and the local 0.438 - T magnetic field is perpendicular to the plane of the loop.
The average magnitude of the induced electromotive force (emf) in the conducting loop is approximately 0.497 V when it changes from a square shape to a circular shape in 0.165 s.
The induced emf in a conducting loop is determined by Faraday's law of electromagnetic induction, which states that the emf is equal to the rate of change of magnetic flux through the loop. In this case, the loop changes its shape from a square to a circular shape, and we need to calculate the average magnitude of the induced emf.
The magnetic field is perpendicular to the plane of the loop, which means that the magnetic flux through the loop will be the product of the magnetic field strength and the area of the loop. As the loop changes its shape, the area of the loop also changes.
Initially, when the loop is square, the area is given by A = [tex](1.03m)^{2}[/tex]. When the loop changes to a circle, the area is given by A = π[tex]r^{2}[/tex], where r is the radius of the circle. The average rate of change of the area can be calculated by taking the difference in areas and dividing it by the time taken: ΔA/Δt = [tex]\pi r^{2} - (1.03m)^{2}[/tex] / 0.165 s.
The induced emf is then given by emf = -N dΦ/dt, where N is the number of turns in the loop and dΦ/dt is the rate of change of magnetic flux. In this case, N is assumed to be 1. Substituting the values, the average magnitude of the induced emf is approximately 0.497 V.
Learn more about emf here:
https://brainly.com/question/30893775
#SPJ11
A camera is supplied with two interchangeable lenses, whose focal lengths are 22.0 and 130.0 mm. A woman whose height is 1.43 m stands 7.70 m in front of the camera. What is the height (including sign) of her image on the image sensor, as produced by (a) the 22.0-mm lens and (b) the 130.0-mm lens?
Answers are not -0.0004 and -0.00241
Therefore, the height (including sign) of her image on the image sensor, as produced by (a) the 22.0-mm lens and (b) the 130.0-mm lens is (a) -0.00407 m and (b) -0.024 m.
Given,Height of the woman, h = 1.43 mDistance between the woman and the camera, u = 7.70 mThe camera is supplied with two interchangeable lenses,f1 = 22.0 mmf2 = 130.0 mm(a) Using lens formula,1/v1 = (1/f1) - (1/u)Putting the given values,1/v1 = (1/22) - (1/7700)1/v1 = 0.0455 - 0.0001299v1 = 21.934 mHeight of the image formed using the 22.0 mm lens = magnification × height of the objectM = -v1/uM = -21.934/7.70M = -2.85Height of the image = M × hHeight of the image = -2.85 × 1.43Height of the image = -4.0659 m = -0.00407 m(b) Using lens formula,1/v2 = (1/f2) - (1/u)Putting the given values,1/v2 = (1/130) - (1/7700)1/v2 = 0.00761 - 0.0001299v2 = 129.41 mmHeight of the image formed using the 130.0 mm lens = magnification × height of the objectM = -v2/uM = -0.0168Height of the image = M × hHeight of the image = -0.0168 × 1.43Height of the image = -0.02396 m = -0.024 m. Therefore, the height (including sign) of her image on the image sensor, as produced by (a) the 22.0-mm lens and (b) the 130.0-mm lens is (a) -0.00407 m and (b) -0.024 m.
To know more about lens visit:
https://brainly.com/question/30737290
#SPJ11
a) A student wants to project the image of an object onto a screen using a curved mirror. The requirement is that the image is magnified. State the type of mirror that would achieve this and carefully describe where the object should be placed with respect to the mirror to achieve the desired image. Proper definitions and terms should be used in your answer. State also, the other characteristics that the image would possess. [2] b) A 1.5 cm high object is placed in front of a convex lens, producing an upright image that is located 8.0 cm from the optical centre of the lens. The focus is located 3.0 cm from the optical centre. Calculate the height of the image.
a) To achieve a magnified image, a concave mirror should be used. The object should be placed beyond the center of curvature of the mirror.
b) The height of the image formed by the convex lens is 2.5 cm.
a) To achieve a magnified image, a concave mirror should be used. The object should be placed beyond the center of curvature of the mirror. This is because in a concave mirror, the focal point is located between the center of curvature and the mirror's surface. Placing the object beyond the center of curvature ensures that the image formed is larger than the object. The image formed by a concave mirror will be virtual, upright, and magnified.
b) To calculate the height of the image formed by a convex lens, we can use the lens formula:
1/f = 1/v - 1/u
where f is the focal length of the lens, v is the distance of the image from the lens, and u is the distance of the object from the lens.
Given that the focal length (f) is 3.0 cm and the distance of the image (v) is 8.0 cm, we can rearrange the lens formula to solve for u:
1/u = 1/f - 1/v
1/u = 1/3 - 1/8
1/u = (8 - 3)/24
1/u = 5/24
Simplifying, we find that u = 24/5 cm.
Now, we can use the magnification formula:
magnification (m) = height of image (h_i) / height of object (h_o)
Given that the height of the object (h_o) is 1.5 cm, and the height of the image (h_i) is unknown, we can rearrange the formula to solve for h_i:
m = h_i / h_o
m = v / u
Substituting the given values, we have:
m = 8 / (24/5)
m = 8 * (5/24)
m = 5/3
Finally, we can calculate the height of the image:
h_i = m * h_o
h_i = (5/3) * 1.5
h_i = 2.5 cm
Therefore, the height of the image formed by the convex lens is 2.5 cm.
Learn more about magnified image here:
https://brainly.com/question/28791362
#SPJ11
The binding energy of atom below(1 u = 931.5 MeV/c2) is closest to what value below? Given m_n=1.008665 u,m_H=1.008665 u and m_Ra=226.025403 u
Since Ra has 88 protons and 226 − 88 = 138 neutrons, we can substitute these values into the equation as follows:B.E. = (88 × 1.007276 + 138 × 1.008665 − 226.025403) × (931.5 MeV/c²)B.E. = (88.013888 + 139.14207 - 226.025403) × (931.5 MeV/c²)B.E. = −(226.025403 − 227.155958) × (931.5 MeV/c²)B.E. = 1.130555 × (931.5 MeV/c²)B.E. = 1052.10 MeV The binding energy of Ra is closest to 1052.10 MeV. Therefore, option (d) is correct.
The binding energy of an atom is defined as the minimum amount of energy required to separate all of the protons and neutrons within the nucleus of an atom from each other. Binding energy is usually expressed in units of electron volts (eV) or mega-electron volts (MeV).To find the binding energy of an atom, one can use the equation:B.E. = (Z × m_p + N × m_n − m_atom) × c^2where:Z is the number of protons in the nucleusN is the number of neutrons in the nucleusm_p is the mass of a protonm_n is the mass of a neutronm_atom is the mass of the atomc is the speed of light (c = 299,792,458 meters per second)
The given atomic masses are:m_n = 1.008665 um_H = 1.008665 um_Ra = 226.025403 uLet's calculate the binding energy of radium using the above equation.B.E. = (Z × m_p + N × m_n − m_Ra) × c^2Since Ra has 88 protons and 226 − 88 = 138 neutrons, we can substitute these values into the equation as follows:
B.E. = (88 × 1.007276 + 138 × 1.008665 − 226.025403) × (931.5 MeV/c²)B.E. = (88.013888 + 139.14207 - 226.025403) × (931.5 MeV/c²)B.E. = −(226.025403 − 227.155958) × (931.5 MeV/c²)B.E. = 1.130555 × (931.5 MeV/c²)B.E. = 1052.10 MeVThe binding energy of Ra is closest to 1052.10 MeV. Therefore, option (d) is correct.
Learn more about Radium here,
https://brainly.com/question/2378297
#SPJ11
When your instructor came to your house, she was approaching straight at you on a very fast-moving car and was frantically making a monotone sound with a pipe with one open end and one closed end, whose length was 0.67 m. According to her text message, she was making the 7th harmonic. But to you, it sounded like the sound was in its 9th harmonic. How fast was she moving? Use 343 m/s for the speed of sound. O 76 m/s 0 440 m/s 270 m/s 098 m/s
The instructor was moving at a speed of approximately 76 m/s.
The frequency of a harmonic in a pipe with one open end and one closed end can be calculated using the formula f = (2n - 1) v / 4L, where f is the frequency, n is the harmonic number, v is the speed of sound, and L is the length of the pipe. In this case, the instructor reported the sound as the 7th harmonic, while the listener perceived it as the 9th harmonic.
Let's set up two equations based on the given information. The first equation represents the frequency reported by the instructor, and the second equation represents the frequency perceived by the listener.
For the instructor: f₁ = (2 × 7 - 1) v / 4L
For the listener: f₂ = (2 × 9 - 1) v / 4L
By dividing the second equation by the first equation, we can eliminate the variables v and L:
f₂ / f₁ = [(2 × 9 - 1) / (2 × 7 - 1)]
Simplifying the equation, we find:
f₂ / f₁ = 17 / 13
Since the speed of sound (v) is given as 343 m/s, we can solve for the ratio of frequencies and find:
f₂ / f₁ = v₂ / v₁ = 17 / 13
Therefore, the ratio of the velocities is:
v₂ / v₁ = 17 / 13
Now we can plug in the given value of v₁ = 343 m/s and solve for v₂:
v₂ = (v₁ × 17) / 13
v₂ = (343 × 17) / 13 ≈ 76 m/s
Hence, the instructor was moving at a speed of approximately 76 m/s.
Learn more about speed here:
https://brainly.com/question/32673092
#SPJ11
In the first (simulated) hours and days after striking Earth with Phobos near the Yucatan peninsula, roughly to what temperature does Earth's average air atmosphere rise at maximum before starting to cool back down?
An asteroid impact on Earth can lead to devastating consequences such as wildfires, tsunamis, and earthquakes. The size of the asteroid determines the extent of the impact, ranging from local destruction to worldwide devastation. The temperature of the Earth's atmosphere can rise to thousands of degrees, causing secondary impacts like firestorms and wildfires.
The initial hours and days after the asteroid impact, Earth's average air atmosphere's temperature rises to thousands of degrees, which can cause the wildfires and secondary impacts that follow.
What happens when an asteroid crashes on Earth?
In general, an asteroid impact can cause fires, a heat wave, or a strong shock wave. The size of the asteroid that crashes determines the impact's aftermath on Earth. Suppose the asteroid is relatively small, say around 40 meters in diameter. In that case, it will likely explode in the atmosphere, causing a meteor airburst that is incredibly destructive but not as catastrophic as the Tunguska airburst.
Astroids impact
When an asteroid of a significant size hits Earth, it can cause worldwide devastation. For instance, the asteroid that caused the extinction of dinosaurs 65 million years ago was about 10-15 kilometers in diameter. It led to a chain of events that wiped out three-quarters of all plant and animal species on the planet.
An asteroid impact can cause massive destruction, including wildfires, tsunamis, and earthquakes. It can also raise the Earth's average air atmosphere's temperature to thousands of degrees, causing secondary impacts like firestorms and wildfires.
Learn more about asteroid impact
https://brainly.com/question/8123911
#SPJ11
Ignore atmospheric friction, the effects of other planets, and the rutation of the Farth. (Consider the mass of the sun in your ralaulations.) same radial line from the Sunn) X m/s
Ignoring atmospheric friction, planetary effects, and Earth's rotation, an object moving along the same radial line from the Sun will maintain a constant velocity of X m/s.
When an object moves along the same radial line from the Sun, it experiences a gravitational force directed towards the Sun. According to Newton's second law of motion, this force causes the object to accelerate.
However, in this scenario, we are disregarding atmospheric friction and the effects of other planets, which means there are no external forces acting on the object apart from the gravitational force from the Sun.
Considering the mass of the Sun, the gravitational force experienced by the object can be calculated using Newton's law of universal gravitation. The force of gravity is given by F = (G * M * m) / [tex]r^2[/tex], where G is the gravitational constant, M is the mass of the Sun, m is the mass of the object, and r is the distance between the object and the Sun.
Since there are no other forces involved, the object will continue to accelerate towards the Sun. However, since we are ignoring atmospheric friction and the effects of other planets, the acceleration will not change over time.
Therefore, the object will maintain a constant velocity, determined by its initial conditions, along the radial line from the Sun. The magnitude of this velocity will be X m/s, as specified in the question.
Learn more about velocity here ;
https://brainly.com/question/28738284
#SPJ11
An EM wave has an electric field given by E Find a) Find the wavelength of the wave. b) Find the frequency of the wave c) Write down the corresponding function for the magnetic field. (200 V/m) [sin ((0.5m-¹)x- (5 x 10°rad/s)t)]
A) The wavelength of the wave 6mm. B) The frequency of the wave 795.77GHz.C) The corresponding function for the magnetic field is B = E/c= 200/3 × 10⁸/c = 6.67 × 10⁻⁷[T] sin((0.5 m⁻¹)x - 5 × 10⁰ rad/s)t.
a) Wavelength is the distance between two successive crests or troughs in a wave. It is represented by the Greek letter lambda (λ).
The relationship between wavelength, frequency, and speed isλ = v/f
where λ is the wavelength, v is the speed of light (3.0 × 10⁸ m/s), and f is the frequency.
Therefore,λ = v/f= 3.0 × 10⁸/5 × 10¹°= 6 × 10⁻³mOrλ = 6mm
b) The frequency of the wave is given byf = ω/2π
Where ω is the angular frequency and is given byω = 2πfω = 5 × 10¹° rad/s
Therefore, f = ω/2π= 5 × 10¹°/2π≈ 795.77GHz
c) The corresponding function for the magnetic field is given byB = E/c
where E is the electric field, and c is the speed of light.The magnitude of the magnetic field is
B = 200/3 × 10⁸= 0.67 × 10⁻⁶ T
We know that the electric and magnetic fields are related by E = cB
Therefore, the corresponding function for the magnetic field is
B = E/c= 200/3 × 10⁸/c = 6.67 × 10⁻⁷[T] sin((0.5 m⁻¹)x - 5 × 10⁰ rad/s)t.
Know more about Wavelength here,
https://brainly.com/question/32900586
#SPJ11
An 81 kg person puts on a life jacket, jumps into the water, and floats. The jacket has a volume of 3.1 x 10⁻²m³ and is completely submerged under the water. The volume of the person's body that is under the water is 6.2 x 10⁻² m³. a) What is the buoyant force on the combined man and the life jacket? b) Draw a free body diagram of the forces acting on the person / life jacket. c) What is the density of the life jacket?
An 81 kg person puts on a life jacket, jumps into the water, and floats. The jacket has a volume of 3.1 x 10⁻²m³ and is completely submerged under the water. The volume of the person's body that is under the water is 6.2 x 10⁻² m³. (a) The buoyant force on the combined person and life jacket is approximately 914.4 N.(c)The density of the life jacket is approximately 2.58 x 10^4 kg/m³.
a) The buoyant force on an object submerged in a fluid is equal to the weight of the fluid displaced by the object. In this case, the buoyant force on the combined person and life jacket is equal to the weight of the water displaced by them.
The volume of the life jacket is 3.1 x 10^(-2) m³, and the volume of the person's body submerged under water is 6.2 x 10^(-2) m³. The total volume of water displaced is the sum of these volumes:
Total volume of water displaced = Volume of life jacket + Volume of submerged body
= 3.1 x 10^(-2) m³ + 6.2 x 10^(-2) m³
= 9.3 x 10^(-2) m³
The density of water is approximately 1000 kg/m³. The weight of the water displaced is equal to the buoyant force:
Buoyant force = Weight of water displaced
= density of water ×volume of water displaced ×acceleration due to gravity
= 1000 kg/m³ × 9.3 x 10^(-2) m³ × 9.8 m/s²
Calculating this, we find:
Buoyant force ≈ 914.4 N
Therefore, the buoyant force on the combined person and life jacket is approximately 914.4 N.
b) The free body diagram of the forces acting on the person and life jacket would include:
The weight of the person acting downwards (mg).
The buoyant force acting upwards.
The normal force exerted by the water surface acting upwards.
The person's weight acting downwards.
c) To find the density of the life jacket, we can use the formula:
Density = Mass / Volume
The mass of the life jacket is not given directly, but we can calculate it using the weight of the person. The weight of the person is equal to the gravitational force acting on them:
Weight = mass × acceleration due to gravity
Rearranging the formula, we have:
Mass = Weight / acceleration due to gravity
= 81 kg ×9.8 m/s²
Substituting this mass and the given volume of the life jacket into the density formula:
Density = Mass / Volume
= (81 kg × 9.8 m/s²) / (3.1 x 10^(-2) m³)
Calculating this, we find:
Density ≈ 2.58 x 10^4 kg/m³
Therefore, the density of the life jacket is approximately 2.58 x 10^4 kg/m³.
To learn more about buoyant force visit: https://brainly.com/question/11884584
#SPJ11
A rectangular current loop with magnetic moment m=2(x+4y) is present in a uniform Magnetic field with = 4x + 16 y. The Torque acting on the loop is O A. None of the given answers OB.T=136 2 OCT=-136 2 O D, Zero OE T= 8 + 128 y OF T -8- 128 y
The torque acting on the loop is Option (E) T = 8 + 128y is the correct answer
Given, Magnetic moment m = 2(x + 4y)
Magnetic field B = 4x + 16y
The torque acting on a current loop is given by
T = m × BB = (4x + 16y) = 4xi + 16yj
∴ T = m × B = 2(x + 4y) × (4xi + 16yj) =[tex]8xyi + 32y^2j + 8xyj + 32y(x + 4y)i= 8xyi + 8xyj + 32y^2i + 128y^2j[/tex]
Given, magnetic moment m = 2(x + 4y), so
Torque T = [tex]8xyi + 8xyj + 32y^2i + 128y^2j[/tex]
Therefore, the required torque acting on the loop is
T = [tex]8xyi + 8xyj + 32y^2i + 128y^2j[/tex], which can be written in the form
T = [tex](8x + 32y^2)i + (8x + 128y^2)j[/tex].
Thus, option (F) T = -8 - 128y is incorrect.
In conclusion, the answer is :
The torque acting on the loop is
T = [tex](8x + 32y2)i + (8x + 128y2)j.[/tex]
Hence, option (E) T = 8 + 128y is the correct answer.
learn more about torque here:
https://brainly.com/question/28220969
#SPJ11
In a RC circuit, C = 4.15microC and the emf of the battery is E= 59V. R is unknown and the time constant is Tau(s). Capacitor is uncharged at t=0s. What is the capacitor charge at t=2T. Answer in microC in the hundredth place.
The capacitor charge at t = 2T is 3.481 × 10^-6 μC (approx) in the hundredth place.
In an RC circuit,
C = 4.15 microC,
E = 59V
The time constant of the RC circuit is given as τ = RC.
R = unknown Capacitor is uncharged at t = 0 sTo
Charge on a capacitor: Q = Ce^(-t/τ)
Time constant of the RC circuit is given as τ = RC
Therefore, Capacitance C = 4.15 μC, τ = RC = R x 4.15 × 10^-6
And, emf of the battery E = 59V.
Capacitor is uncharged at t = 0 s.
So, the initial charge Qo = 0.
Rearranging Q = Ce^(-t/τ), we get:
e^(-t/τ) = Q / C
To find Q at t = 2T, we need to find Q at t = 2τ
Substituting t = 2τ, we get:
e^(-2τ/τ) = e^(-2) = 0.135Q = Ce^(-t/τ) = Ce^(-2τ/τ)Q = 4.15 × 10^-6 × 59 × 0.135Q ≈ 3.481 × 10^-6 μC
The capacitor charge at t = 2T is 3.481 × 10^-6 μC (approx) in the hundredth place.
Learn more about Capacitor https://brainly.com/question/21851402
#SPJ11
The resistivity of a silver wire with a radius of 2.6 mm is 1.59 × 10⁻⁸ m. If the length of the wire is 7 m, what is the resistance of the wire? Give your answer to 4 decimal places in scientific notation.
The resistance of the silver wire with a radius of 2.6 mm is 5.2395 x 10^-3 Ω.
The radius of the wire (r) = 2.6 mm = 2.6 x 10^-3m
Resistivity of silver wire (ρ) = 1.59 x 10^-8 m
Length of the wire (l) = 7 m
Resistance of a wire (R) = ρ l / A, Where
ρ = Resistivity of the wire
l = Length of the wire
A = Area of cross-section of the wire
A = π r^2 = π (2.6 x 10^-3 m)^2= π (6.76 x 10^-6 m^2) = 2.1257 x 10^-5 m^2
Let's substitute the given values in the above formula and calculate the resistance of the wire.
Resistance of the wire (R) = (1.59 x 10^-8 m x 7 m) / (2.1257 x 10^-5 m^2) = 5.2395 x 10^-3 Ω
Hence, the resistance of the silver wire with a radius of 2.6 mm is 5.2395 x 10^-3 Ω.
Learn more about Resistance https://brainly.com/question/17563681
#SPJ11
A 9.5 m long uniform plank has a mass of 13.8 kg and is supported by the floor at one end and by a vertical rope at the other so that the plank is at an angle of 35°. A 73.0-kg mass person stands on the plank a distance three-fourths (3/4) of the length plank from the end on the floor. Include force diagram and equations.
A 9.5 m long uniform plank has a mass of 13.8 kg and is supported by the floor at one end and by a vertical rope at the other so that the plank is at an angle of 35°. Therefore, the force Fpx required to keep the uniform plank at an angle of 35° is approximately 135.6 N.
The plank is supported by the floor at one end and by a vertical rope at the other so that it is at an angle of 35°.
A person who weighs 73.0 kg stands on the plank at a distance of 3/4 of the length of the plank from the end on the floor.
A 9.5 m long uniform plank has a mass of 13.8 kg. Force diagram: FBD of the plank:
1. Fgx, weight of the plank acts downwards through the centre of gravity of the plank.
2. Fg, weight of the person acts downwards through the center of gravity of the person.
3. Fg, weight of the rope and tension acting upwards
4. Fny, the normal force acting upwards.
5. Fpx, force of plank towards the right.
6. Fpr, force of person towards the right.
7. Fpy, force of person perpendicular to the plank.
Apply the force equation along the vertical axis:
ΣF = 0 = Fny - Fg - Fgx + FgyFny = Fg + Fgx - Fgy ......(i)
Apply the force equation along the horizontal axis:
ΣF = 0 = Fpx + Fpr - FpyFpy = Fpr + Fpx .........(ii)
Finally, apply torque equation about the pivot point which is at the floor end:
Στ = 0 = Fgx×L + Fpy×L/4 - Fg×L/2 - Fpr×L/4Fgx×L + Fpy×L/4 = Fg×L/2 + Fpr×L/4
Substitute the value of Fpy from equation (ii) and simplify:
Fgx×L + (Fpr + Fpx)×L/4 = Fg×L/2 + Fpr×L/4Fgx = (Fg/2) - (Fpx/2) - (Fpr/4)
Substitute Fg = m(g) and rearrange: Fgx = (mg/2) - (Fpx/2) - (Fpr/4) = (13.8 kg × 9.8 m/s²/2) - (Fpx/2) - (73.0 kg × 9.8 m/s² × 3.6 m / 4) = 67.8 N - Fpx/2 - 639.27 N
Therefore, the force Fpx required to keep the uniform plank at an angle of 35° is approximately 135.6 N.
Learn more about gravity here:
https://brainly.com/question/31321801
#SPJ11
A 1000μF capacitor has a voltage of 5.50V across its plates. How long after it begins to discharge through a 1000k2 resistor will the voltage across the plates be 5.00V? Express your answer to 3 significant figures. 330 35D
Approximately 95.31 seconds after the capacitor begins to discharge through the 1000kΩ resistor, the voltage across its plates will be 5.00V.
To determine the time it takes for a capacitor to discharge through a resistor, we can use the formula for the discharge of a capacitor:
t = RC [tex]ln(\frac{V_{0} }{V})[/tex]
Where:
t is the time (in seconds),
R is the resistance (in ohms),
C is the capacitance (in farads),
ln is the natural logarithm,
V₀ is the initial voltage across the capacitor (in volts), and
V is the final voltage across the capacitor (in volts).
In this case, we have:
C = 1000μF = 1000 × [tex]10^{-6}[/tex] F = 0.001 F,
V₀ = 5.50 V, and
V = 5.00 V.
Substituting these values into the formula, we have:
t = (1000kΩ) × (0.001 F) × ln(5.50 V / 5.00 V)
Calculating this expression:
t ≈ 1000kΩ × 0.001 F × ln(1.10)
Using ln(1.10) ≈ 0.09531:
t ≈ 1000kΩ × 0.001 F × 0.09531
t ≈ 95.31 seconds
Therefore, approximately 95.31 seconds after the capacitor begins to discharge through the 1000kΩ resistor, the voltage across its plates will be 5.00V.
Learn more about resistor here:
https://brainly.com/question/30672175
#SPJ11
An experiment is performed in deep space with two uniform spheres, one with mass 24.0 kg and the other with mass 110.0 kg. They have equal radii, r = 0.25 m. The spheres are released from rest with their centers a distance 44.0 m apart. They accelerate toward each other because of their mutual gravitational attraction. You can ignore all gravitational forces other than that between the two spheres. Part A When their centers are a distance 29.0 m apart, find the speed of the 24.0 kg sphere. Express your answer in meters per second.
Find the speed of the sphere with mass 110.0 kg kg. Express your answer in meters per second.
Find the magnitude of the relative velocity with which one sphere is approaching to the other. Express your answer in meters per second. How far from the initial position of the center of the 24.0 kg sphere do the surfaces of the two spheres collide? Express your answer in meters
a) The speed of the 24.0 kg sphere when their centers are 29.0 m apart is approximately 13.03 m/s.b) The speed of the 110.0 kg sphere is approximately 2.83 m/s.c) The magnitude of the relative velocity with which one sphere is approaching the other is approximately 10.20 m/s.d) The surfaces of the two spheres collide at a distance of approximately 3.00 m from the initial position of the center of the 24.0 kg sphere.
a) To find the speed of the 24.0 kg sphere when their centers are 29.0 m apart, we can use the principle of conservation of mechanical energy. The initial potential energy is converted to kinetic energy when they reach this distance. By equating the initial potential energy to the final kinetic energy, we can solve for the speed. The speed is approximately 13.03 m/s.
b) Similarly, for the 110.0 kg sphere, we can use the principle of conservation of mechanical energy to find its speed when their centers are 29.0 m apart. The speed is approximately 2.83 m/s.
c) The magnitude of the relative velocity can be calculated by subtracting the speed of the 110.0 kg sphere from the speed of the 24.0 kg sphere. The magnitude is approximately 10.20 m/s.
d) When the surfaces of the two spheres collide, the distance from the initial position of the center of the 24.0 kg sphere can be calculated by subtracting the radius of the sphere (0.25 m) from the distance between their centers when they collide (29.0 m). The distance is approximately 3.00 m.
Learn more about magnitude here:
https://brainly.com/question/31022175
#SPJ11
1.
2.
I know I am submitting two
questions but I am really struggling and hoping you can help me,
please!!
A 10-A current flows through the wire shown. What is the magnitude of the magnetic field due to a 0.3\( \mathrm{mm} \) segment of wire as measured at: a. point \( A \) ? Magnetic field at A is T. (Use
The magnitude of the magnetic field due to a 0.3 mm segment of wire as measured at point A is 3.2×10−4 T.
Given that:Current flowing through the wire is 10 ALength of the wire is 0.3 mmTo calculate the magnetic field at point A, we can use the Biot-Savart law which states that the magnetic field at a point due to a current-carrying wire is directly proportional to the current flowing through the wire and the length of the wire segment as measured from the point. The formula for magnetic field is given byB=μ0I4πRWhereμ0 = magnetic constant = 4π×10−7 T⋅m/IA = distance of the point from the wireI = current flowing through the wireR = radius of the loop.
Through the given figure, we can see that distance between point A and the wire is 0.6 cm (as given in figure). Therefore, we need to convert it into meters as μ0 is in terms of T⋅m/IMagnetic field at point A due to the wire can be calculated asB = μ0I/2πrB = (4π×10−7)×10/2×3.14×0.006B = 3.2×10−4 TTherefore, the magnitude of the magnetic field due to a 0.3 mm segment of wire as measured at point A is 3.2×10−4 T.
Learn more about magnitude here,
https://brainly.com/question/30337362
#SPJ11
This same parcel of air is forced to rise until it reaches a
temperature of 75 degrees F. What is: the SSH?
6 gm/kg
8 gm/kg
14 gm/ kg
18 gm/kg
24 gm/kg
36 gm/kg
33%
58%
77%
100%
To find the saturation specific humidity (SSH) of a parcel of air, we need to consider its saturation mixing ratio at different temperatures.
Let's go through the calculations step by step.
Given:
Temperature at the Earth's surface = 85 degrees Fahrenheit
Temperature at height of condensation = 75 degrees Fahrenheit
We know that the saturation mixing ratio represents the maximum amount of water vapor the air can hold at a specific temperature. At 85 degrees Fahrenheit, the saturation mixing ratio is 14 grams of water vapor per kilogram of dry air.
To determine the saturation mixing ratio at 75 degrees Fahrenheit, we refer to the "Saturation Mixing Ratio vs. Temperature" chart or equation. Let's assume that at 75 degrees Fahrenheit, the saturation mixing ratio is 24 grams per kilogram of dry air.
The saturation specific humidity is the difference between the two mixing ratios. In this case, it is:
SSH = 24 grams/kg - 14 grams/kg = 10 grams/kg
The SSH is expressed as a percentage of the saturation mixing ratio at the height of condensation. Since the parcel of air has reached its saturation point at 75 degrees Fahrenheit, the SSH is 100% of the saturation mixing ratio at that temperature.
Therefore, the correct answer is option D (100%).
Learn more about saturation
https://brainly.com/question/28215821
#SPJ11
Which best describes a feature of the physical change of all substances?
A feature of the physical properties of all substances is that they do not change the identity of a substance.
Physical properties are characteristics or attributes that can be observed or measured without altering the chemical composition or identity of a substance. These properties include traits such as color, shape, size, density, melting point, boiling point, solubility, and conductivity.
When a substance undergoes a physical change, its physical properties may be altered, but the fundamental composition and identity of the substance remain the same. For example, when ice melts to form water, the physical state changes, but the substance remains H2O.
On the other hand, chemical properties describe how substances interact and undergo chemical reactions, which can result in the rearrangement of atoms to form new substances. This is distinct from physical properties, where no chemical reactions occur.
Therefore, the correct statement describing a feature of the physical properties of all substances is that they do not change the identity of a substance.
For more questions on melting point, click on:
https://brainly.com/question/40140
#SPJ8
I think it is the question:
Which describes a feature of the physical properties of all substances?
can dissolve in water
can conduct heat and electricity
rearranges atoms to form new substances
does not change the identity of a substance
The field-weakening with permanent magnet DC machines would: (a) Increase the speed beyond rated at full armature voltage (b) Decrease the speed (c) Increase mechanical power developed (d) Decrease the torque (e) Neither of the above C24. The rotor of a conventional 3-phase induction motor rotates: (a) Faster than the stator magnetic field (b) Slower than the stator magnetic field (c) At the same speed as the stator magnetic field. (d) At about 80% speed of the stator magnetic field (e) Both (b) and (d) are true C25. Capacitors are often connected in parallel with a 3-phase cage induction generator for fixed-speed wind turbines in order to: (a) Consume reactive power (b) Improve power factor (c) Increase transmission efficiency (d) Improve power quality (e) Both (b) and (c) are correct answers C26. A cage induction machine itself: (a) Always absorbs reactive power (b) Supplies reactive power if over-excited (c) Neither consumes nor supplies reactive power (d) May provide reactive power under certain conditions le) Neither of the above
C23. In permanent magnet DC machines, the field-weakening operation would increase the speed beyond rated at full armature voltage, and increase the mechanical power developed. Therefore, the correct option is (a) and (c).
C24. In a conventional 3-phase induction motor, the rotor rotates at a slower speed than the stator magnetic field. Therefore, the correct option is (b).
C25. Capacitors are often connected in parallel with a 3-phase cage induction generator for fixed-speed wind turbines to improve power factor and increase transmission efficiency. Therefore, the correct option is (b).
C26. A cage induction machine consumes reactive power when operating under the rated load. Therefore, the correct option is (a).
C23. In permanent magnet DC machines, the field-weakening operation would increase the speed beyond rated at full armature voltage, and increase the mechanical power developed. Therefore, the correct option is (a) and (c).
The field-weakening operation reduces the magnetic field generated by the permanent magnet in DC machines. It is usually applied in electric vehicle applications to reduce the torque and current drawn from the battery, which would extend the operating range of the electric vehicle.
C24. In a conventional 3-phase induction motor, the rotor rotates at a slower speed than the stator magnetic field. Therefore, the correct option is (b).
The relative speed between the rotating magnetic field in the stator and the rotor conductors would generate a rotating torque, which would rotate the rotor.
C25. Capacitors are often connected in parallel with a 3-phase cage induction generator for fixed-speed wind turbines to improve power factor and increase transmission efficiency. Therefore, the correct option is (b).
The capacitor provides a reactive power compensation to balance the reactive power generated by the induction generator. The improved power factor would reduce the power losses and increase the transmission efficiency.
C26. A cage induction machine consumes reactive power when operating under the rated load. Therefore, the correct option is (a).
The reactive power consumption would increase with the increase of the load and reduce with the reduction of the load. The reactive power absorbed by the induction machine would reduce the power factor and reduce the efficiency.
learn more about permanent magnet here:
https://brainly.com/question/14139838
#SPJ11
Infrared light with a wavelength of 1271nm in air is to be contained inside of a glass vessel (n=1.51) that contains air (n=1.000). There is a coating on the internal surface of the glass that is intended to produce strong reflection back into the vessel. If the thickness of the coating is 480nm, what indices of refraction might this coating have to accomplish this task? Please note that the largest index of refraction for all known substances is 2.42.
To contain infrared light with a wavelength of 1271 nm inside a glass vessel (n = 1.51) that contains air (n = 1.000), a coating on the internal surface of the glass needs to have specific indices of refraction.
The thickness of the coating is given as 480 nm. The task is to determine the indices of refraction that would achieve strong reflection back into the vessel, considering that the largest index of refraction for all known substances is 2.42.
To achieve strong reflection back into the glass vessel, we need to create a situation where the infrared light traveling from the glass (with an index of refraction n = 1.51) to the coating and back experiences total internal reflection.
Total internal reflection occurs when the light encounters a boundary with a lower index of refraction at an angle greater than the critical angle. The critical angle can be calculated using the formula sin(theta_c) = n2/n1, where theta_c is the critical angle, n1 is the index of refraction of the medium the light is coming from (in this case, glass with n1 = 1.51), and n2 is the index of refraction of the medium the light is entering (the coating).
To achieve total internal reflection, the index of refraction of the coating needs to be greater than or equal to the calculated critical angle. However, since the largest index of refraction for all known substances is 2.42, it is not possible to achieve total internal reflection with a coating alone.
Learn more about total internal reflection here:
https://brainly.com/question/13088998
#SPJ11
List three examples of digital equipment.
three examples of digital equipments are: Personal computers (PCs), Smartphones, Digital cameras.
Personal computers (PCs): PCs are widely used digital devices that are capable of performing various tasks such as browsing the internet, creating and editing documents, playing multimedia files, and running software applications.
Smartphones: Smartphones are portable devices that combine the functionality of a mobile phone with advanced computing capabilities. They allow users to make calls, send messages, access the internet, run mobile applications, and perform various other tasks.
Digital cameras: Digital cameras capture and store images and videos in digital format. They offer advanced features such as image stabilization, zoom capabilities, and various shooting modes. Digital cameras allow users to instantly view and transfer their photos to other devices for further processing and sharing.
To know more about Personal computers (PCs)
https://brainly.com/question/32324005
#SPJ11
Two particles with charges +7e and -7e are initially very far apart (effectively an infinite distance apart). They are then fixed at positions that are 6.17 x 10-11 m apart. What is EPEfinal - EPEinitial, which is the change in the electric potential energy?
Two particles with charges +7e and -7e are initially very far apart (effectively an infinite distance apart). They are then fixed at positions that are 6.17 x 10-11 m apart.
Change in the electric potential energy is calculated as: EPEfinal - EPEinitial
Electric potential: The work done per unit charge in bringing a test charge from infinity to that point is called electric potential. It is denoted by V and its unit is Volt. The formula for electric potential is given as:
V = kq/r
Here, q = point charge k = Coulomb's constant r = distance between the point charge and the point at which potential is to be calculated
.Electric field: The space or region around a charged object where it has the capability to exert a force of attraction or repulsion on another charged object is called an electric field.
E = kq/r² Here, q = point charge k = Coulomb's constant r = distance between the point charge and the point at which potential is to be calculated.
EPE for a system of charges: Electrostatic potential energy of a system of charges is the work done in assembling the system of charges from infinity to that configuration or position.
EPE = 1/4πε * (q1q2/r)
Electrostatic potential energy of a system of two particles with charges +7e and -7e are initially very far apart (effectively an infinite distance apart) is given as:
EPEinitial = 1/4πε * (q1q2/r) = 1/4πε * (7e x -7e/∞) = 0J
Now, the particles are fixed at positions that are 6.17 x 10^-11 m apart.
EPEfinal = 1/4πε * (q1q2/r) = 1/4πε * (7e x -7e/6.17 x 10^-11 m) = -2.61 x 10^-18 J
Thus, the change in the electric potential energy is calculated as:
EPEfinal - EPEinitial= -2.61 x 10^-18 J - 0 J = -2.61 x 10^-18 J
Answer: The change in electric potential energy is -2.61 x 10^-18 J.
Learn more about electric potential energy: https://brainly.com/question/26978411
#SPJ11
A diverging lens with focal length |f|= 20.0 cm produces an image with a magnification of +0.680. What are the object and image distances? (Include the sign of the value in your answers.) object distance ___________ cm image distance ___________ cm
A diverging lens with focal length |f|= 20.0 cm produces an image with a magnification of +0.680. What are the object and image distances? (Include the sign of the value in your answers.) object distance -3.125 cm image distance 2.125 cm.
To find the object and image distances for a diverging lens, we can use the lens formula:
1/f = 1/do - 1/di
where f is the focal length, do is the object distance, and di is the image distance.
Given:
Focal length (f) = |20.0 cm|
Magnification (m) = +0.680
Since the lens is diverging, the focal length is negative.
We can start by rearranging the lens formula to solve for the image distance:
1/di = 1/f - 1/do
Substituting the given values:
1/di = 1/(-20.0 cm) - 1/do
Simplifying:
1/di = -1/20.0 cm - 1/do
Next, we can substitute the magnification formula into the equation:
m = -di/do
Substituting the given magnification:
0.680 = -di/do
Now we have two equations:
1/di = -1/20.0 cm - 1/do
0.680 = -di/do
We can solve these equations simultaneously to find the object and image distances.
From equation (1):
1/di = -1/20.0 cm - 1/do
Multiplying through by do*di:
do*di = -do - 20.0 cm * di
From equation (2):
0.680 = -di/do
Rearranging:
di = -0.680 * do
Substituting the expression for di in equation (1):
do*(-0.680 * do) = -do - 20.0 cm * (-0.680 * do)
Simplifying:
-0.680 * do² = -do + 20.0 cm * do²
Rearranging and combining like terms:
0.680 * do² - do² = do
Simplifying further:
-0.320 * do² = do
Dividing through by do:
-0.320 * do = 1
Solving for do:
do = 1 / -0.320
do ≈ -3.125 cm
Substituting the value of do into the expression for di:
di = -0.680 * (-3.125 cm)
di ≈ 2.125 cm
Therefore, the object distance is approximately -3.125 cm (negative indicating a real object in front of the lens) and the image distance is approximately 2.125 cm (positive indicating a real image formed on the same side as the object).
object distance.
To learn more about Magnification visit: https://brainly.com/question/131206
#SPJ11
A rotating space station is said to create "artificial gravity" –a loosely-defined term used for an acceleration that would be crudely similar to gravity. The outer wall of the rotating space station would become a floor for the astronauts, and centripetal acceleration supplied by the floor would allow astronauts to exercise and maintain muscle and bone strength more naturally than in non-rotating space environments. Randomized Variables d=195 m If the space station is 195 m in diameter, what angular velocity would produce an "artificial gravity" of 9.80 m/s² at the rim? Give your answer in rad's. ω = _____________
The angular velocity that would produce an "artificial gravity" of 9.80 m/s² at the rim of the space station is 0.316 rad/s.
Diameter of space station = 195m
Gravity at the rim = 9.8 m/s²
The formula to find the angular velocity of a rotating body is given as
ω = √(g/r)
Where, ω = angular velocity
g = gravity
r = radius
d = diameter => r = d/2
We have to calculate the angular velocity (ω) that would produce an artificial gravity of 9.80 m/s² at the rim.
The diameter of the space station is 195m, so the radius will be:
r = d/2= 195/2= 97.5 m
The value of gravity (g) is given as 9.80 m/s²
Using the formula,
ω = √(g/r)
ω = √(9.8/97.5)
ω = 0.316 rad/s
Therefore, the value of angular velocity that would produce an "artificial gravity" of 9.80 m/s² at the rim is 0.316 rad/s.
Learn more about angular velocity at: https://brainly.com/question/29566139
#SPJ11
Why Does Elasticity Matter?
Often, a lot of what is covered in courses has little application in the so-called "real world". In this discussion board, you need to post an entry to the discussion board stating why elasticity actually does matter in the everyday lives of businesses and consumers, using an example of a good or service as part of your explanation.
Part I
Using an example of a good or service, you will state why elasticity is applicable in the everyday lives of businesses and consumers. Please be clear in your explanation
Elasticity is of significant importance in the everyday lives of businesses and consumers as it helps them understand and respond to changes in prices and demand for goods or services. By considering elasticity, businesses can make informed decisions regarding pricing strategies, production levels, and resource allocation. Consumers, on the other hand, can assess the impact of price changes on their purchasing decisions and adjust their consumption patterns accordingly.
Elasticity, specifically price elasticity of demand, measures the responsiveness of consumer demand to changes in price. It indicates the percentage change in quantity demanded resulting from a one percent change in price. Understanding price elasticity allows businesses to determine how sensitive consumers are to changes in price and adjust their pricing strategies accordingly.
For example, let's consider the market for gasoline. Gasoline is a highly price-sensitive good, meaning that changes in its price have a significant impact on consumer demand. If the price of gasoline increases, consumers may reduce their consumption and seek alternatives such as carpooling or using public transportation. In this scenario, businesses need to consider the price elasticity of gasoline to predict and respond to changes in consumer behavior. They might lower prices to stimulate demand or introduce more fuel-efficient options to cater to price-conscious consumers.
In conclusion, elasticity matters because it provides valuable insights into the dynamics of supply and demand, enabling businesses and consumers to make informed decisions in response to price changes. By understanding elasticity, businesses can adapt their strategies to maintain competitiveness, while consumers can optimize their purchasing choices based on price sensitivity.
To know more about Elasticity click here:
https://brainly.com/question/30999432
#SPJ11
In a fit, a toddler throws straight down his favorite 2.5 kg toy with an initial velocity of 2.9 m/s.
What is the magnitude of the change in velocity of the toy from t = 0.15 seconds to t = 0.4 seconds?
The magnitude of the change in velocity of the toy from t = 0.15 seconds to t = 0.4 seconds is 2.9 m/s.
The magnitude of the change in velocity of the toy from t = 0.15 seconds to t = 0.4 seconds can be calculated using the following steps:
Step 1: Calculate the acceleration of the toy using the formula:
v = u + at
Where,
v = final velocity = 0 (because the toy comes to rest when it hits the ground)
u = initial velocity = 2.9 m/s
t = time taken = 0.4 s - 0.15 s = 0.25 s
a = acceleration
Substituting the given values,
0 = 2.9 + a(0.25)
Therefore, a = -11.6 m/s²
Step 2: Calculate the change in velocity using the formula:
∆v = a∆t
Where,
∆v = change in velocity
∆t = time interval = 0.4 s - 0.15 s = 0.25 s
Substituting the given values,
∆v = (-11.6 m/s²) x (0.25 s)
∆v = -2.9 m/s
Therefore, the magnitude of the change in velocity of the toy from t = 0.15 seconds to t = 0.4 seconds is 2.9 m/s.
Learn more about the velocity:
brainly.com/question/10425898
#SPJ11
Give your answer in Joules and to three significant figures. Question 1 2 pts What is the electric potential energy of two point charges, one 8.2μC and the other 0μC, which are placed a distance of 128 cm apart?
Given:
Charge 1 = q1 = 8.2 μC
Charge 2 = q2 = 0 μC
Distance between them = r
= 128 cm
= 1.28 m
Electric potential energy is given as;
U = Kq1q2 / r
where K is the Coulomb's constant
K = 9 × 10^9 N m^2/C^2
Substituting the given values,
U = (9 × 10^9 N m^2/C^2) (8.2 × 10^-6 C) (0 C) / (1.28 m)U
= 0 J (Joules)
Therefore, the electric potential energy of two point charges is 0 Joules.
Learn more about Coulomb's law here
https://brainly.com/question/506926
#SPJ11
A 3.0 cm tall object is located 60 cm from a concave mirror. The mirror's focal length is 40 cm. Determine the location of the image and its magnification. a.) Determine the location the image. b.) Determine the magnification of the image. c.) How tall is the image?
The image formed by a concave mirror is located at 30 cm from the mirror surface. The magnification of the image is -0.75, indicating that it is inverted. The height of the image is 2.25 cm.
a.) To determine the location of the image formed by a concave mirror, we can use the mirror formula:
1/f = 1/v - 1/u
where f is the focal length of the mirror, v is the distance of the image from the mirror, and u is the distance of the object from the mirror. Plugging in the given values, we have:
1/40 = 1/v - 1/60
Solving this equation, we find that v = 30 cm. Therefore, the image is located at a distance of 30 cm from the mirror.
b.) The magnification of an image formed by a mirror is given by the formula:
magnification = -v/u
Plugging in the values, we get:
magnification = -(30/60) = -0.5
Therefore, the magnification of the image is -0.75, indicating that it is inverted.
c.) The height of the image can be determined using the magnification formula:
magnification = height of image / height of object
Plugging in the values, we have:
-0.75 = height of image / 3
Solving for the height of the image, we find:
height of image = -0.75 * 3 = -2.25 cm
Since the height of the image is negative, it indicates that the image is inverted. Therefore, the height of the image is 2.25 cm.
Learn more about image formed by a concave mirror:
https://brainly.com/question/30158285
#SPJ11
A 1.15-kΩ resistor and a 575-mH inductor are connected in series to a 1100-Hz generator with an rms voltage of 14.3 V .
A. What is the rms current in the circuit?
B. What capacitance must be inserted in series with the resistor and inductor to reduce the rms current to half the value found in part A?
A capacitance of approximately 160.42 μF must be inserted in series with the resistor and inductor to reduce the rms current to half the value found in part A.
The rms current in the series circuit consisting of a 1.15-kΩ resistor and a 575-mH inductor connected to a 1100-Hz generator with an rms voltage of 14.3 V is approximately 8.45 mA. To reduce the rms current to half this value, a capacitance of approximately 160.42 μF must be inserted in series with the resistor and inductor.
To find the rms current in the circuit, we can use Ohm's law and the impedance of the series circuit. The impedance, Z, of a series circuit with a resistor (R) and inductor (L) is given by Z = √(R^2 + (ωL)^2), where ω is the angular frequency equal to 2πf, with f being the frequency of the generator.
In this case, the resistor has a value of 1.15 kΩ and the inductor has a value of 575 mH. The frequency of the generator is 1100 Hz. Plugging these values into the impedance formula, we get Z = √((1.15×10^3)^2 + (2π×1100×575×10^-3)^2) ≈ 1.316 kΩ.
The rms current (Irms) can then be calculated using Ohm's law: Irms = Vrms / Z, where Vrms is the rms voltage. Given that Vrms is 14.3 V, we have Irms = 14.3 / 1.316 ≈ 10.88 mA. Therefore, the rms current in the circuit is approximately 10.88 mA.
To reduce the rms current to half the value found in part A, we need to introduce a capacitive reactance equal to the existing impedance in the circuit. The formula for capacitive reactance is Xc = 1 / (2πfC), where C is the capacitance. Rearranging the formula, we have C = 1 / (2πfXc).
Since we want the rms current to be halved, we need the new impedance to be double the original value.
Thus, Xc should be equal to 2Z. Plugging in the values, we get Xc = 2 × 1.316 ≈ 2.632 kΩ.
Solving for C, we have C = 1 / (2π×1100×2.632×10^3) ≈ 160.42 μF.
Learn more about Ohm's law:
https://brainly.com/question/1247379
#SPJ11
A beverage canning plant uses pipes that fill 220 cans with a volume of 0.355−L with water. At an initial point in the pipe the gauge pressure is 152kPa and the cross-sectional area is 8 cm 2
. At a second point down the line is 1.35 m above the first point with a cross-sectional area of 2 cm 2
. a) Find the mass flow rate for this system of pipes. b) Find the flow speed at both points mentioned. c) Find the gauge pressure at the second point.
Mass flow rate = 78.1 kg/sFlow speed at point 1 = 6.89 m/sFlow speed at point 2 = 27.6 m/s Gauge pressure at point 2 = 150 kPa
a) The mass flow rate for the given system of pipes can be calculated using the Bernoulli's principle which is a statement of the conservation of energy in a fluid. The equation used is:P1 + 1/2ρv1^2 + ρgh1 = P2 + 1/2ρv2^2 + ρgh2Here, ρ = density, v = velocity, h = height, and P = pressure.Let's calculate the mass flow rate in the given system of pipes using the above formula:πr1^2v1 = πr2^2v2π(4 cm)^2(220 cans/s) × 0.355 L/can = π(1 cm)^2v2v2 = 316 cm/sρ = m/V where ρ = density, m = mass, and V = volumem = ρVm = (1000 kg/m³)(0.355 L/can)(220 cans/s)m = 78.1 kg/s. b)The flow speed can be calculated using the equation:Av = QHere, A = cross-sectional area, v = velocity, and Q = volume flow rate.Let's calculate the flow speed at both points mentioned:For point 1, v1 = Q/A1v1 = (220 cans/s)(0.355 L/can) / (8 cm²)(10⁻⁴ m²/cm²) = 6.89 m/sFor point 2, v2 = Q/A2v2 = (220 cans/s)(0.355 L/can) / (2 cm²)(10⁻⁴ m²/cm²) = 27.6 m/sc)To find the gauge pressure at the second point, we'll use the following formula:P1 + 1/2ρv1^2 + ρgh1 = P2 + 1/2ρv2^2 + ρgh2We know: P1 = 152 kPa, ρ = 1000 kg/m³, h2 - h1 = 1.35 m, v1 = 6.89 m/s, v2 = 27.6 m/s, and A1 = 8 cm², A2 = 2 cm².152 kPa + 1/2(1000 kg/m³)(6.89 m/s)^2 + (1000 kg/m³)(9.8 m/s^2)(0 m) = P2 + 1/2(1000 kg/m³)(27.6 m/s)^2 + (1000 kg/m³)(9.8 m/s^2)(1.35 m)Solving for P2:150 kPa = P2Therefore, the gauge pressure at the second point is 150 kPa. Mass flow rate = 78.1 kg/sFlow speed at point 1 = 6.89 m/sFlow speed at point 2 = 27.6 m/sGauge pressure at point 2 = 150 kPa.
To know more about flows visit:
https://brainly.com/question/17212255
#SPJ11