A builder set-out slab heights for each corner of a rectangular
(60m x 25m) concrete foundation slab. The builder set up an
automatic level near one corner and surveyed the other concrete
corner marks

Answer:

The person is paid $5.50 per hour and receives a $0.25 increase every 6 months. This means that every 6 months, their wage increases by $0.25.

To determine the sequence of hourly wages, we can start with the current wage of $5.50 and then add $0.25 every 6 months.

The correct answer is:

B. 5.50, 5.75, 6.00, 6.25, 6.50...

This sequence represents the person's hourly wages starting with their current wage of $5.50 and increasing by $0.25 every 6 months.

a. The statement is false

bi. The kernel of T contains only the zero vector.

bii.  If the set (T(vi),...,T(v.)) is linearly dependent, it is true that the set (V, V.) is linearly dependent as well

To construct a counterexample

Let V be a vector space over the real numbers, and let H and K be the subspaces of V defined by

H = {(x, 0) : x ∈ R}

K = {(0, y) : y ∈ R}

H consists of all vectors in V whose second coordinate is zero, and K consists of all vectors in V whose first coordinate is zero.

This means that H and K are subspaces of V, since they are closed under addition and scalar multiplication.

However, H ∪ K is not a subspace of V, since it is not closed under addition.

For example, (1, 0) ∈ H and (0, 1) ∈ K, but their sum (1, 1) ∉ H ∪ K.

To show that the kernel of T contains only the zero vector

Suppose that there exists a nonzero vector v in the kernel of T, i.e., T(v) = 0. Since T is a linear transformation, we have

T(0) = T(v - v) = T(v) - T(v) = 0 - 0 = 0

This implies that 0 = T(0) = T(v - v) = T(v) - T(v) = 0 - 0 = 0, which contradicts the assumption that T is one-to-one.

Therefore, the kernel of T contains only the zero vector.

Suppose that the set {T(v1),...,T(vn)} is linearly dependent, i.e., there exist scalars c1,...,cn, not all zero, such that:

[tex]c_1 T(v_1) + ... + c_n T(v_n) = 0[/tex]

Since T is a linear transformation

[tex]T(c_1 v_1 + ... + c_n v_n) = 0[/tex]

Using part (i), since the kernel of T contains only the zero vector, so we must have

[tex]c_1 v_1 + ... + c_n v_n = 0[/tex]

Since the ci are not all zero, this implies that the set {v1,...,vn} is linearly dependent as well.

Learn more on vector space on https://brainly.com/question/22717427

#SPJ4

Question is incomplete, find the complete question below

a) The following statement is either True or False. If the statement is true, provide a proof. If false, construct

a specific counterexample to show that the statement is not always true. (3 points)

Let H and K be subspaces of a vector space V , then H ∪K is a subspace of V .

(b) Let V and W be vector spaces. Let T : V →W be a one-to-one linear transformation, so that an equation

T(u) = T(v) always implies u = v. (7 points)

(i) Show that the kernel of T contains only the zero vector.

(ii) Show that if the set {T(v1),...,T(vn)} is linearly dependent, then the set {v1,...,vn} is linearly

dependent as well.

Hint: Use part (i).

Answer:

(3, 3)

Step-by-step explanation:

Use the midpoint formula (x1+x2/2, y1+y2/2)

so its (-2+8/2, 6+0/2)

which is (3,3)

Based on the calculations, the truck size that provides the best economic value is the 10 m³ truck, with an average annual cost of $52.40 per stop.

Step 1: Calculate the annual solid waste generation

- Number of stops: Let's assume there are 1,500 stops.

- Average people per stop: 10

- Per capita solid waste generation rate: 0.5 kg/d

- Total solid waste generation per day: 1,500 stops * 10 people * 0.5 kg/d = 7,500 kg/d

Step 2: Calculate the total distance traveled per day

- Average one-way distance to the transfer station: 8 km

- Number of stops * Average distance between two stops: Let's assume the average distance between two stops is 60 m (0.06 km).

- Total distance traveled for waste collection per day: 1,500 stops * 0.06 km = 90 km

- Total distance traveled per day: 90 km + 2 * 8 km = 106 km

Step 3: Calculate the total collection time per day

- Time to collect waste from one stop and time to the next stop: 60 seconds

- Number of stops * Time to collect waste from one stop and time to the next stop: 1,500 stops * 60 seconds = 90,000 seconds

Step 4: Calculate the total working time per day

- Total collection time for waste collection per day + Off-route time per day: Let's assume the off-route time is 30 minutes (0.5 hours).

- Total working time per day: 90,000 seconds + 0.5 hours * 60 minutes/hour * 60 seconds/minute = 92,700 seconds

Step 5: Determine the truck size based on working time and trips per day

- Select the truck size (10, 16, or 30 m³) that allows the truck to complete the trips within the working time limit of 10 hours and no more than 3 trips per day.

Since the working time is 92,700 seconds, which is less than 10 hours (36,000 seconds), any truck size can complete the trips within the working time limit.

Step 6: Calculate the annual cost for each stop

- Purchase price of the selected truck size:

 - For the 10 m³ truck: Purchase price = $42,000 * (10/4)^0.6 = $78,190.18

 - For the 16 m³ truck: Purchase price = $42,000 * (16/4)^0.6 = $113,832.42

 - For the 30 m³ truck: Purchase price = $42,000 * (30/4)^0.6 = $182,940.60

- Annual operating and maintenance expenses: Total distance traveled per day * $2.7/km = 106 km * $2.7/km = $286.20

- Annual crew wages:

 - Total working time per day / 60 = 92,700 seconds / 60 seconds/minute = 1,545 minutes

 - Number of crew members: 3

 - Hourly wage per person: $2.5

 - Overtime wage per person: $4.5

 - Total crew wages = (1,545 minutes * $2.5/person) + (overtime hours * $4.5/person)

   - For regular hours (up to 8 hours): Total crew wages = (1,545 minutes / 60 minutes/hour) * $2.5/person = $64.38

   - For overtime hours (none since working time is less than 8 hours): Total crew wages = $0

- Overhead cost: Same as the direct labor cost

- Total annual cost:

 - For the 10 m³ truck: Total annual cost = Purchase price + Annual operating and maintenance expenses + Annual crew wages + Overhead cost = $78,190.18 + $286.20 + $64.38 + $64.38 = $78,605.14

 - For the 16 m³ truck: Total annual cost = Purchase price + Annual operating and maintenance expenses + Annual crew wages + Overhead cost = $113,832.42 + $286.20 + $64.38 + $64.38 = $114,247.38

 - For the 30 m³ truck: Total annual cost = Purchase price + Annual operating and maintenance expenses + Annual crew wages + Overhead cost = $182,940.60 + $286.20 + $64.38 + $64.38 = $183,355.56

- Average annual cost for each stop:

 - For the 10 m³ truck: Average annual cost for each stop = Total annual cost / Number of stops = $78,605.14 / 1,500 = $52.40

 - For the 16 m³ truck: Average annual cost for each stop = Total annual cost / Number of stops = $114,247.38 / 1,500 = $76.16

 - For the 30 m³ truck: Average annual cost for each stop = Total annual cost / Number of stops = $183,355.56 / 1,500 = $122.24

Based on the lowest average annual cost for each stop, the truck size that provides the best economic value is the 10 m³ truck, with an average annual cost of $52.40 per stop.

To know more about annual cost, refer here:

https://brainly.com/question/17256648

#SPJ4

Answer:

25 girls

Step-by-step explanation:

We Know

The ratio of boys to girls is 4:5. For every 4 boys, there are 5 girls.

To get from 4 to 20, we multiply by 5.

We Take

5 x 5 = 25 girls

So, there are 25 girls in class.

Answer: 25 girls are in the class

Step-by-step explanation: You can set up the ratio 4:5 as a fraction, [tex]\frac{4}{5}[/tex] to find your answer. You are given the fact that 20 boys are in the class so now you can solve 2 ways.

Option 1 - Set up the equation algebraically as [tex]\frac{20}{x}[/tex], where x = number of girls and set that equal to [tex]\frac{4}{5}[/tex]. This way allows you to see that the fraction must have the same ratio as 4:5. You can see that 4 x 5 = 20, so the multiple factor is 5. The variable x must equal 5 x 5, so x = 25.

Option 2 - Multiply the amount of boys given to you by the reciprocal of the ratio. Instead of using [tex]\frac{4}{5}[/tex], you have to use [tex]\frac{5}{4}[/tex] because there are more girls than boys in the class. This allows you to finish the problem by multiplying 20 x [tex]\frac{5}{4}[/tex] to get the result of [tex]\frac{100}{4}[/tex], which you may know simplifies into 25.

The values of Δs = 0.919 kJ/kg K, ΔSsurr = 0.020 kJ/kg K and ΔSuniv = 0.939 kJ/kg K. It is a compressor, there is no heat transfer in the system, so q = 0.

P = 5/2 R

m = 3 kg/min

T1 = 70 + 273 = 343 K

T2 = 150 + 273 = 423 K

P1 = 100 kPa

P2 = 300 kPa

W = 6 kJ

Q = -W = -6 kJ

For a reversible process, we have for an ideal gas:

Δs = cp ln (T2/T1) - R ln (P2/P1)

Here, cp = 5/2 R

For air, R = 0.287 kJ/kg K

Part (a)

Δs = (5/2 × 0.287) ln (423/343) - 0.287 ln (300/100)

= 1.608 kJ/kg K - 0.689 kJ/kg K

= 0.919 kJ/kg K

Part (b)

ΔSsurr = -q/T

= -(-6)/293

= 0.020 kJ/kg K

Part (c)

ΔSuniv = Δs + ΔSsurr

= 0.919 + 0.020

= 0.939 kJ/kg K

Therefore, the values of Δs, ΔSsurr, and ΔSuniv are as follows:

Δs = 0.919 kJ/kg K

ΔSsurr = 0.020 kJ/kg K

ΔSuniv = 0.939 kJ/kg K

Learn more about heat transfer

https://brainly.com/question/13433948

#SPJ11

The magnitude of the angle of twist φ in a 660-mm length of the shaft when 44 kW is being transmitted at 6 Hz is 0.3567 radians.

Outside diameter of shaft = D = 57 mm

Wall thickness of shaft = t = 1.72 mm

Maximum shear stress in shaft = τ = 186 M

Pa = 186 × 10⁶ Pa

Modulus of rigidity of titanium = G = 31 G

Pa = 31 × 10⁹ Pa

Rotational speed = n = 20 Hz

We know that the power transmitted by the shaft is given by the relation, P = π/16 × τ × D³ × n/60

From the above formula, we can find out the maximum power P that can be transmitted by the shaft.

P = π/16 × τ × D³ × n/60= 3.14/16 × 186 × (57/1000)³ × 20= 11.56 kW

Hence, the maximum power P that can be transmitted by the shaft is 11.56 kW.

b)Given data:

Length of shaft = L = 660 mm = 0.66 m

Power transmitted by the shaft = P = 44 kW = 44 × 10³ W

Rotational speed = n = 6 Hz

We know that the angle of twist φ in a shaft is given by the relation,φ = TL/JG

Where,T is the torque applied to the shaft

L is the length of the shaft

J is the polar moment of inertia of the shaft

G is the modulus of rigidity of the shaft

We know that the torque T transmitted by the shaft is given by the relation,

T = 2πnP/60

From the above formula, we can find out the torque T transmitted by the shaft.

T = 2πn

P/60= 2 × 3.14 × 6 × 44 × 10³/60= 1,845.6 Nm

We know that the polar moment of inertia of a hollow shaft is given by the relation,

J = π/2 (D⁴ – d⁴)where, d = D – 2t

Substituting the values of D and t, we get, d = D – 2t= 57 – 2 × 1.72= 53.56 mm = 0.05356 m

Substituting the values of D and d in the above formula, we get,

J = π/2 (D⁴ – d⁴)= π/2 ((57/1000)⁴ – (53.56/1000)⁴)= 1.92 × 10⁻⁸ m⁴

We can now substitute the given values of T, L, J, and G in the relation for φ to calculate the angle of twist φ in the shaft.φ = TL/JG= 1,845.6 × 0.66/ (1.92 × 10⁻⁸ × 31 × 10⁹)= 0.3567 radians

Hence, the magnitude of the angle of twist φ in a 660-mm length of the shaft when 44 kW is being transmitted at 6 Hz is 0.3567 radians.

Learn more about magnitude

https://brainly.com/question/31022175

#SPJ11

The maximum power P that can be transmitted by the shaft can be determined using the formula (a), and the magnitude of the angle of twist φ can be calculated using the formula (b).

To determine the maximum power that can be transmitted by the hollow titanium shaft, we need to consider the maximum shear stress and the rotation speed.

(a) The maximum shear stress can be calculated using the formula: τ = (16 * P * r) / (π * D^3), where τ is the shear stress, P is the power, and r is the radius of the shaft. Rearranging the formula, we get: P = (π * D^3 * τ) / (16 * r).

First, we need to find the radius of the shaft. The outer radius (R) can be calculated as R = D/2 = 57 mm / 2 = 28.5 mm. The inner radius (r) can be calculated as r = R - t = 28.5 mm - 1.72 mm = 26.78 mm. Converting the radii to meters, we get r = 0.02678 m and R = 0.0285 m.

Substituting the values into the formula, we get: P = (π * (0.0285^3 - 0.02678^3) * 186 MPa) / (16 * 0.02678). Solving this equation gives us the maximum power P in kilowatts.

(b) To determine the magnitude of the angle of twist φ, we can use the formula: φ = (P * L) / (G * J * ω), where L is the length of the shaft, G is the shear modulus, J is the polar moment of inertia, and ω is the angular velocity.

First, we need to find the polar moment of inertia J. For a hollow shaft, J can be calculated as J = (π/2) * (R^4 - r^4).

Substituting the values into the formula, we get: φ = (44 kW * 0.66 m) / (31 GPa * (π/2) * (0.0285^4 - 0.02678^4) * 2π * 6 Hz). Solving this equation gives us the magnitude of the angle of twist φ.

Please note that you should calculate the final values of P and φ using the equations provided, as the specific values will depend on the calculations and may not be accurately represented here.

Learn more about maximum power

https://brainly.com/question/14837464

#SPJ11

The slope necessary to sustain uniform flow at this depth is most nearly: c) 0.0043.

To determine the slope necessary to sustain uniform flow in the given rectangular channel, we can use Manning's equation, which relates the flow rate, channel geometry, channel roughness, and slope of the channel.

Manning's equation is given as:

Q = (1.49/n) * A * R^(2/3) * S^(1/2)

Where:

Q = Flow rate (cubic feet per second)

n = Manning's roughness coefficient (dimensionless)

A = Cross-sectional area of the channel (square feet)

R = Hydraulic radius (A/P), where P is the wetted perimeter of the channel (feet)

S = Channel slope (feet per foot)

We are given the flow rate (Q) as 45 cfs, the channel width (B) as 5 ft, and the channel depth (D) as 1.1 ft.

First, let's calculate the cross-sectional area (A) of the channel:

A = B * D = 5 ft * 1.1 ft = 5.5 square feet

Next, we need to determine the hydraulic radius (R):

P = 2B + 2D = 2(5 ft) + 2(1.1 ft) = 12.2 ft

R = A / P = 5.5 sq ft / 12.2 ft = 0.45 ft

Now, we can rearrange Manning's equation to solve for the channel slope (S):

S = [(Q * n) / (1.49 * A * R^(2/3))]^2

Plugging in the given values:

S = [(45 cfs * 0.016) / (1.49 * 5.5 sq ft * (0.45 ft)^(2/3))]^2

S ≈ 0.0043 ft/ft

Therefore, the slope necessary to sustain uniform flow at a depth of 1.1 ft in this rectangular channel is approximately 0.0043, which corresponds to option c).

Learn more about depth

brainly.com/question/33467630

#SPJ11

Initial value problem refers to a differential equation that has been provided with initial conditions.

We have the differential equation's"

[tex]+ y' = sec(t[/tex]

)We can find the complementary function of the given differential equation by solving the following characteristic equation:

[tex]r2 + r = 0r(r + 1) = 0r1 = 0[/tex]

and r2 = -1Hence, the complementary function is:

[tex]yC = c1 + c2 e-t[/tex]

Yap = 2At + B, i's

= 2A

From the given differential equation, we have:

y" + y' = sec(t)2A + 2At + B = sec(t

)Comparing the coefficients of both sides, we get

[tex]:A = 0, B \\= 0, \\and 2A + 2C\\ = 1\\We get\\ C = 1/2[/tex]

Therefore, the particular solution Isay = 1/2Using the initial conditions

y(0) = 6 and y′(0) = 3,

we get:

[tex]yC + yP \\= 6 + 1/2 \\= 13/2y'C + y[/tex]

'P = 0 + 0 = 0

Hence, the solution of the given initial value problem is:

y(t)

= yC + yP

= c1 + c2 e-t + 1/2.

To know more about initial visit:

https://brainly.com/question/32209767

#SPJ11

Step-by-step explanation:

(4x + 5)(4x + 5) or (4x + 5)^2

Concrete protects reinforcement from corrosion through several mechanisms such as physical barriers and an alkaline environment.

Passivation is a chemical process that occurs in concrete to protect the reinforcement from corrosion.

1. Physical Barrier: The dense and impermeable nature of concrete prevents harmful substances, such as water and chloride ions, from reaching the reinforcement. This barrier prevents corrosion-causing agents from coming into contact with the metal.
2. Alkaline Environment: Concrete has a high alkaline pH, typically around 12-13. This alkalinity creates an environment that is unfavorable for corrosion to occur. The high pH helps to passivate the steel reinforcement.
3. Passivation: Passivation is a chemical process that occurs in concrete to protect the reinforcement from corrosion. When steel reinforcement is embedded in concrete, a thin layer of oxide forms on its surface due to the alkaline environment. This oxide layer acts as a protective barrier, preventing further corrosion by reducing the access of corrosive agents to the steel.

b. Durability against chemical effects:
Concrete is generally resistant to many chemical substances. However, certain chemicals can cause degradation and reduce its durability. Here are a few examples:
1. Acidic Substances: Strong acids, such as sulfuric acid or hydrochloric acid, can attack and deteriorate the concrete matrix. The acidic environment reacts with the calcium hydroxide present in the concrete, leading to the dissolution of cementitious materials and weakening of the structure.
2. Chlorides: Chlorides can penetrate concrete and reach the reinforcement, leading to the corrosion of steel. Chlorides can come from various sources, such as seawater, deicing salts, or industrial processes. The corrosion of steel reinforcement due to chloride attack can cause cracks, spalling, and structural damage.
3. Sulfates: Sulfates, typically found in soil or groundwater, can react with the cementitious materials in concrete, causing expansion and cracking. This process is known as sulfate attack and can lead to the loss of strength and durability of the concrete.

In order to ensure durability against chemical effects, it is essential to consider the environment in which the concrete will be exposed and select appropriate materials and construction techniques. This may involve the use of chemical-resistant admixtures, protective coatings, or proper design considerations to mitigate the effects of chemical exposure.

Learn more about reinforced concrete:

https://brainly.com/question/14487569

#SPJ11

The value of β (concentration polarization) is 4.08 × [tex]10^{-5[/tex].The value of β (concentration polarization) can be calculated as follows:

Given data:
The area of each spiral wound membrane module = 10 m²
The number of membrane modules present in the system = 5
Flow rate of the feed solution entering the system = 1.2 L/s
The salt concentration of the reject stream is c₁ = 27.4 kg/m³
The salt rejection is R = 0.992
The applied transmembrane pressure is AP = 30.3 atm
Aw = 4.75 x [tex]10^{-3[/tex]kg water s m² atm
As = 2.03 x [tex]10^7[/tex] m/s
II = 0.001c² +0.7438c +0.0908 (in atm, where c is the mass concentration of NaCl in kg/m³)
p = -0.000286c² + 0.7027c + 997.0 (in kg/m³, where c is the mass concentration of NaCl in kg/m³)

We can calculate the mass flow rate as follows:

Mass flow rate = density × flow rate = p × Q

Where p is the density of the solution and Q is the flow rate of the feed solution.

We can find the density of the feed solution using the given equation:

p = -0.000286c² + 0.7027c + 997.0

Where c is the mass concentration of NaCl in kg/m³.

Substituting the given values in the above equation, we get:

p = -0.000286(0.2)² + 0.7027(0.2) + 997.0
p = 1067.874 kg/m³

Now, we can calculate the mass flow rate using the given equation:

Mass flow rate = p × Q

Substituting the given values, we get:

Mass flow rate = 1067.874 kg/m³ × 1.2 L/s × [tex]10^{-{3[/tex] m³/L
Mass flow rate = 1.281 kg/s

The permeate flow rate can be calculated using the given equation:

Permeate flow rate = (1 - R) × Mass flow rate

Substituting the given values, we get:

Permeate flow rate = (1 - 0.992) × 1.281 kg/s
Permeate flow rate = 0.010488 kg/s

We can calculate the average velocity of the feed solution using the given equation:

Velocity = Mass flow rate / (density × Area)

Substituting the given values, we get:

Velocity = 1.281 kg/s / (1067.874 kg/m³ × 50 m²)
Velocity = 0.000024 m/s

The value of β can be calculated using the given equation:

β = (π² × Dm × δc) / (4 × Aw × Velocity)

Where Dm is the molecular diffusivity of NaCl in water and δc is the thickness of the concentration polarization layer.

We can find the molecular diffusivity using the given equation:

Dm = II / p

Substituting the given values, we get:

Dm = (0.001c² +0.7438c +0.0908) / (-0.000286c² + 0.7027c + 997.0)
Dm = 7.052 × [tex]10^{-10[/tex] m²/s

We can assume that δc is equal to the membrane thickness, which is given by:

δc = 1.1 × [tex]10^{-{6[/tex] m

Substituting the given values in the equation for β, we get:

β = (π² × 7.052 × [tex]10^-{6[/tex] m²/s × 1.1 × 10^-6 m) / (4 × 4.75 × [tex]10^{-3[/tex]kg water s m² atm × 0.000024 m/s)
β = 4.0816 × [tex]10^{-5[/tex] or 4.08 × [tex]10^{-5[/tex] (rounded to 3 significant figures)

Therefore, the value of β (concentration polarization) is 4.08 × [tex]10^{-5[/tex].

Learn more about concentration polarization

https://brainly.com/question/32374593

#SPJ11

The answer is (b) 8.5763 is the standard deviation of X, the number of patients seen until an injection-site reaction occurs.

The number of patients seen until an injection-site reaction occurs follows a geometric distribution with probability of success 0.11.

The formula for the standard deviation of a geometric distribution is:

σ = sqrt(1-p) / p^2

where p is the probability of success.

In this case, p = 0.11, so:

σ = sqrt(1-0.11) / 0.11^2

= sqrt(0.89) / 0.0121

= 8.5763 (rounded to four decimal places)

Therefore, the answer is (b) 8.5763.

Learn more about  number  from

https://brainly.com/question/27894163

#SPJ11

The given chemical reaction for the dissociation of CuSO4 in water is CuSO4 ⇌ Cu2+ + SO42-.At equilibrium, the solution will contain Cu2+, SO42-, NH4+ and OH- ions, which are the product of the reaction between CuSO4 and NH3.

The concentration of each species at equilibrium can be calculated by the following procedure:

The chemical reaction between CuSO4 and NH3 is shown below:

CuSO4 + 2NH3 ⇌ Cu(NH3)42+ + SO42-.

Write the equilibrium constant expression (K) for the above reaction.

[tex]Kc = {[Cu(NH3)42+] [SO42-]} / {[CuSO4] [NH3]2}.[/tex]

Determine the molar concentration of CuSO4.The mass of CuSO4 is given as 2.50 g. Therefore, the molar mass of CuSO4 is calculated as:

Molar mass = Mass / Moles = 2.50 g / 159.61 g/mol = 0.01569 mol.

The molar concentration of CuSO4 is calculated as:

Molar concentration = Moles / Volume (L) = 0.01569 mol / 0.00821 L = 1.91 M.

Determine the molar concentration of NH3.The molar concentration of NH3 is given as 0.300 M. Therefore, the molar concentration of NH3 is:

Molar concentration of NH3 = 0.300 M.

Step 5: Determine the molar concentration of Cu(NH3)42+.Let the molar concentration of Cu(NH3)42+ be x.

Substituting the given and calculated values in the equilibrium constant expression, we have:

[tex]5.3 × 10^13 = (x) [0.00001864] / [1.91 – x]2[/tex]

Simplifying the above equation, we get

x = 0.000277 M.

The molar concentration of Cu(NH3)42+ is 0.000277 M.

Determine the molar concentration of SO42-.Let the molar concentration of SO42- be x.

Substituting the given and calculated values in the equilibrium constant expression, we have:

5.3 × 10^13 = [0.000277] (x) / [1.91 – 0.000277]2

Simplifying the above equation, we get:

x = 1.26 × 10^-6 M

The molar concentration of SO42- is 1.26 × 10^-6 M.

Determine the molar concentration of NH4+. Let the molar concentration of NH4+ be x.

Substituting the given and calculated values in the equilibrium constant expression, we have [tex]5.3 × 10^13 = [x] [0.000277] / [0.300 – x]2.[/tex]

Simplifying the above equation, we get:x = 1.62 × 10^-4 M

The molar concentration of NH4+ is 1.62 × 10^-4 M.

Determine the molar concentration of OH-.The molar concentration of OH- is given as 2.33 × 10^-6 M.

At equilibrium, the concentration of Cu2+ is equal to the concentration of Cu(NH3)42+. The concentration of SO42- is equal to the concentration of NH4+. The concentration of OH- is independent of the initial concentrations of the reactants and products. The concentrations of

Cu(NH3)42+, SO42-, NH4+ and OH- are 0.000277 M, 1.26 × 10^-6 M, 1.62 × 10^-4 M and 2.33 × 10^-6 M respectively.

To know more about equilibrium  :

brainly.com/question/30694482

#SPJ11

The correct option is A, the inequality is x ≥ 0

Here we can see that we have a closed circle at x = 0 (which means that x = 0 is also a solution of the inequality), and an arrow that goes to the right (so the other solutions are larger than zero).

Then this is the set of all values equal to or larger than zero, so the inequality is written as follows:

x ≥ 0

Then the correct option is A, x ≥ 0

Learn more about inequalities at:

https://brainly.com/question/24372553

#SPJ1

They also define the scope of the project and the standards that must be met during construction.(c) Contractual obligations between a main contractor and an employer (client) during the project execution.

The primary contractual obligations of a main contractor and an employer during the project execution are as follows:

1. The employer is obligated to provide the contractor with all necessary project documentation, including drawings, specifications, and contract documents, to allow the contractor to execute the work efficiently.

2. The contractor must execute the work in compliance with the agreed-upon standards and specifications.

3. The contractor is responsible for ensuring that all work is carried out according to the agreed-upon schedule and budget.

4. The employer must pay the contractor for the work performed on time, as specified in the contract documents.

5. The contractor is obligated to adhere to all relevant safety and health regulations while executing the project.

6. The employer is obligated to provide access to the construction site to allow the contractor to execute the work efficiently.

7. The contractor must ensure that all work is carried out to a high standard and with the necessary level of skill and care.

8. The employer is obligated to provide the contractor with adequate notice if they wish to make any changes to the scope of the project.

9. The contractor must notify the employer of any issues that arise during the project promptly.

10. The employer is obligated to inspect the work and approve or reject it, as specified in the contract documents.

To know  more about regardless visit:

https://brainly.com/question/32755670

#SPJ11

If φ∗∣f∣ is differentiable for any differentiable real-valued function f, then φ is differentiable.

To prove that φ is differentiable, we'll use the fact that if φ∗∣f∣ is differentiable for any differentiable real-valued function f, then φ∗ is a continuous linear map between the spaces of differentiable functions.

Let's start by defining the spaces of differentiable functions involved in the statement:

We also have the pullback map φ∗: C∞(M2) → C∞(M1), which is defined as follows:

For any function f ∈ C∞(M2), φ∗(f) is the composition of f with φ. In other words, φ∗(f) = f ∘ φ.

Now, we are given that φ∗∣f∣ is differentiable for any differentiable real-valued function f. This means that φ∗: C∞(M2) → C∞(M1) is a continuous linear map.

We can make use of the fact that M2 is a finite-dimensional manifold. This implies that C∞(M2) is a finite-dimensional vector space.

Now, let's consider the linear map φ∗: C∞(M2) → C∞(M1). Since M2 is finite-dimensional, the dual space of C∞(M2), denoted as (C∞(M2))', is also finite-dimensional.

The dual space of C∞(M2) consists of all linear functionals on C∞(M2). In other words, (C∞(M2))' is the space of all linear maps from C∞(M2) to R (real numbers).

Since φ∗: C∞(M2) → C∞(M1) is a continuous linear map, it induces a dual map, denoted as (φ∗)': (C∞(M1))' → (C∞(M2))'.

However, the dual space of C∞(M1), which is denoted as (C∞(M1))', is also finite-dimensional. This is because M1 is a finite-dimensional manifold.

Now, we have two finite-dimensional vector spaces, (C∞(M1))' and (C∞(M2))', and a linear map (φ∗)': (C∞(M1))' → (C∞(M2))'. If a linear map between finite-dimensional vector spaces is continuous, it must be differentiable.

Therefore, we conclude that (φ∗)': (C∞(M1))' → (C∞(M2))' is differentiable. Since (φ∗)': (C∞(M1))' → (C∞(M2))' corresponds to the map φ: C∞(M1) → C∞(M2), we can conclude that φ is differentiable.

In summary, if φ∗∣f∣ is differentiable for any differentiable real-valued function f and M2 is a finite-dimensional manifold, then φ is differentiable.

Learn more about Manifold

brainly.com/question/28213950

#SPJ11

The time required for burning off a 2 mm diameter sphere by air at atmospheric pressure and 1000 K is approximately 29.02 seconds

The mass transfer of oxygen from air to the carbon surface is the rate-controlling step. So, the time required for burning off a 2 mm diameter sphere by air at atmospheric pressure and 1000 K can be calculated by using the given data.

Density of carbon = 2250 kg/m3

Thickness of carbon coating = 20 µm = 20 × 10-6 m

Radius of sphere = 2 mm/2 = 1 mm = 0.001 m

Given mass transfer coefficient, k = 0.25 m/s

Fraction of oxygen in air, Φ = 21/100 = 0.21

Assuming that the reaction product is CO2, we know that the reaction of carbon with oxygen can be written as:

C (s) + O2 (g) → CO2 (g)

We can write the equation for the combustion reaction as:

1 C (s) + 1 O2 (g) → 1 CO2 (g)

The mass transfer rate of oxygen from air to the carbon surface can be calculated by the formula:

f = k (Ca - C) = (k ρ/NA) (P - P*)

Where,

Ca = Concentration of oxygen in air = Φ P/RTC

C = Concentration of oxygen in the boundary layer

P = Partial pressure of oxygen

P* = Equilibrium pressure of oxygen

ρ = Density of the carbon material

NA = Avogadro’s number

R = Universal gas constant

T = Temperature of the system

At 1000 K, R = 8.314 J/mol-K and NA = 6.023 × 10^23/mol

So, the mass transfer rate of oxygen from air to the carbon surface is:

f = k (Ca - C) = (k ρ/NA) (P - P*)

= (0.25 × 2250/6.023 × 10^23) (0.21 × 1.013 × 10^5 - P*)

For the reaction of carbon with oxygen, we know that:

nC = m/M = (4/12) π r^3 ρ / M

m = nM

Where,

n = Number of moles

M = Molar mass of CO2 = 12 + 2 × 16 = 44 g/mol

r = Radius of the sphere

ρ = Density of carbon material = 2250 kg/m^3

So, m = (4/12) π (0.001)^3 × 2250 = 2.36 × 10^-6 kg

And, the number of moles of carbon present is:

nC = m/M = 2.36 × 10^-6 / 44 = 5.36 × 10^-8 mol

The amount of oxygen required to burn the carbon can be calculated as:

nO2 = nC = 5.36 × 10^-8 mol

The amount of oxygen present in air required for the combustion reaction will be:

nO2 = Φ nAir

So, the number of moles of air required for the combustion reaction will be:

nAir = nO2/Φ = 5.36 × 10^-8 / 0.21 = 2.55 × 10^-7 mol

The volume of air required for the combustion reaction will be:

VAir = nAir RT/P = 2.55 × 10^-7 × 8.314 × 1000 / 1.013 × 10^5

= 2.06 × 10^-11 m^3

The time required for burning off a 2 mm diameter sphere by air can be calculated by the formula:

t = VAir / f

= 2.06 × 10^-11 / (0.25 × 2250/6.023 × 10^23) (0.21 × 1.013 × 10^5 - P*)

= 3.69 × 10^3 P* seconds

The value of P* depends on the temperature at which the reaction occurs. For the given problem, P* can be calculated using the formula:

ln (P*/0.21) = -38000 / RT

So, P* = 0.21 e^(-38000 / (8.314 × 1000))

= 7.77 × 10^-8 atm

= 7.87 × 10^-3 Pa

Therefore, the time required for burning off a 2 mm diameter sphere by air at atmospheric pressure and 1000 K is:

t = 3.69 × 10^3 × 7.87 × 10^-3

= 29.02 seconds (approx)

Learn more about oxygen:

https://brainly.com/question/33311650

#SPJ11

The slope S of the channel is 0.00142592.

The formula to calculate the slope of a rectangular channel is given by:

[tex]$$S = \frac{i}{n}$$[/tex]

Where S is the slope of the channel, i is the hydraulic gradient, and n is the Manning roughness coefficient of the channel.

The hydraulic gradient is calculated by the following formula:

[tex]$$i = \frac{h_L}{L}$$[/tex]

Where hL is the head loss due to friction, and L is the length of the channel. The hydraulic radius is given by:

[tex]$$R = \frac{A}{P}$$[/tex]

Where P is the wetted perimeter of the channel.

Substituting the given values, we get:

[tex]$$A = Wd = 8 \times 4.6 = 36.8 \text{ m}^2\\$$P = 2W + 2d = 2(8) + 2(4.6) = 25.2 \text{ m}$$R = \frac{A}{P} = \frac{36.8}{25.2} = 1.46032 \text{ m}[/tex]

The Manning roughness coefficient is not given, but we can assume a value of 0.025 for a concrete channel with mild silt deposits. The hydraulic gradient is:

[tex]$$i = \frac{h_L}{L} = \frac{0.035648}{L}$$[/tex]

We can assume a value of 1000 m for the length of the channel. Substituting this value, we get:

[tex]$$i = \frac{0.035648}{1000} = 0.000035648$$[/tex]

Finally, substituting the values of i and n in the formula for S, we get:

[tex]$$S = \frac{i}{n} = \frac{0.000035648}{0.025} = 0.00142592$$[/tex]

Rounding off to 8 decimal places, we get: S = 0.00142592.

To know more about the slope, visit:

https://brainly.com/question/33072619

#SPJ11

The pH of the given solution is 1.37.

Given:

[HC2H3O2] = 0.195 M

[KC2H3O2] = 0.110 M

To calculate the pH, we first need to write the reaction equation:

HC2H3O2 + H2O ↔ H3O+ + C2H3O2–

Now, we can write an ICE table:

Initial (M)   Change (M)   Equilibrium (M)

HC2H3O2       -x          0.195 - x

C2H3O2–       -x          0.110 - x

H3O+          x           x

The equilibrium expression for this reaction is:

Kc = [H3O+][C2H3O2–]/[HC2H3O2]

Kc = [x][0.110 – x]/[0.195 – x]

We know that Ka x Kb = Kw, where Ka and Kb are the acid and base dissociation constants, and Kw is the ion product constant of water.

The value of Kw is 1.0 x [tex]10^{-14}[/tex] at 25°C. The value of Kb for C2H3O2– is:

Kb = Kw/Ka = 1.0 x [tex]10^{-14}[/tex]/1.8 x [tex]10^{-5}[/tex] = 5.56 x [tex]10^{-10}[/tex]

pKb = -logKb = -log(5.56 x [tex]10^{-10}[/tex]) = 9.2552

Now, we can solve for x:

5.56 × [tex]10^{-10}[/tex] = x(0.110 – x)/[0.195 – x]

1.08 × [tex]10^{-11}[/tex] = [tex]x^{2}[/tex] – 0.110x + 1.95 × [tex]10^{-2}[/tex]

By using the quadratic formula:

x = (0.110 ± √([tex]0.110^{2}[/tex] - 4 × 1.95 × [tex]10^{-2}[/tex] × 2))/(2×1) = 0.0427 M

[H3O+] = 0.0427 M

pH of the solution = -log[H3O+] = -log(0.0427) = 1.37 (approx)

Learn more about pH from the given link:

https://brainly.com/question/12609985

#SPJ11

Answer: The volume of O₂ formed when 52.5 g of KClO₃ decomposes at STP is approximately 14.39 liters.

Step-by-step explanation:

To determine the volume of O₂ formed when 52.5 g of KClO₃ decomposes at STP (Standard Temperature and Pressure), we need to use stoichiometry and the ideal gas law.

First, we need to find the number of moles of KClO₃:

moles of KClO₃ = mass of KClO₃ / molar mass of KClO₃

The molar mass of KClO₃ can be calculated as follows:

M(K) + M(Cl) + 3 * (M(O)) = 39.10 g/mol + 35.45 g/mol + 3 * (16.00 g/mol) = 122.55 g/mol

moles of KClO₃ = 52.5 g / 122.55 g/mol ≈ 0.428 moles

From the balanced equation, we know that the stoichiometric ratio between KClO₃ and O₂ is 2:3. This means that for every 2 moles of KClO₃ decomposed, 3 moles of O₂ are produced.

moles of O₂ = (moles of KClO₃ / 2) * 3

moles of O₂ = (0.428 moles / 2) * 3 ≈ 0.643 moles

Now, we can use the ideal gas law to calculate the volume of O₂ at STP. At STP, 1 mole of any ideal gas occupies 22.4 liters.

volume of O₂ = moles of O₂ * 22.4 L/mol

volume of O₂ = 0.643 moles * 22.4 L/mol ≈ 14.39 liters

Therefore, the volume of O₂ formed when 52.5 g of KClO₃ decomposes at STP is approximately 14.39 liters.

#SPJ11

The volume of O₂ gas formed when 52.5 g of KClO₃ decomposes at STP can be determined by calculating the number of moles of O₂ produced and then converting it to volume using the ideal gas law is 11.48L.

First, we need to find the number of moles of KClO₃. The molar mass of KClO₃ is 122.55 g/mol, so we divide the mass of KClO₃ (52.5 g) by its molar mass to obtain the number of moles:

[tex]\[\text{{Moles of KClO3}} = \frac{{52.5 \, \text{{g}}}}{{122.55 \, \text{{g/mol}}}} = 0.428 \, \text{{mol}}\][/tex]

According to the balanced equation, for every 2 moles of KClO₃ that decompose, 3 moles of O₂ are produced. Therefore, we can calculate the number of moles of O₂:

[tex]\[\text{{Moles of O2}} = \frac{{3 \times \text{{Moles of KClO3}}}}{2} = \frac{{3 \times 0.428 \, \text{{mol}}}}{2} = 0.642 \, \text{{mol}}\][/tex]

Now we can use the ideal gas law, which states that PV = nRT, to convert the number of moles of O₂ to volume. At STP (standard temperature and pressure), the values are T = 273.15 K and P = 1 atm. The ideal gas constant R = 0.0821 L·atm/(mol·K). Rearranging the equation, we get:

[tex]\[V = \frac{{nRT}}{P} = \frac{{0.642 \, \text{{mol}} \times 0.0821 \, \text{{L·atm/(mol·K)}} \times 273.15 \, \text{{K}}}}{1 \, \text{{atm}}} = 11.48 \, \text{{L}}\][/tex]

Therefore, the volume of O2 gas formed when 52.5 g of KClO₃ decomposes at STP is 11.48 L.

To learn more about volume refer:

https://brainly.com/question/24189159

#SPJ11

Since the observation was taken when the star was at western elongation, the hour angle of Polaris is 6 h 19 m 34.9 s  S 73°29'W.

Given: Latitude of point A,

φ = 45°50'40"N Horizontal angle turned from Point A to Point B,

H = 105°25'10"Declination of Polaris, δ = 88°14'26"S

(this is the time between the time Polaris crosses the meridian and the time we are making our observation).First, we will calculate the azimuth of the celestial body (Polaris) and then use it to find the true bearing of line AB.Step 1: Calculate the azimuth of the celestial body (Polaris)We will use the formula:

Azimuth = arctan [(sin H) / (cos H sin φ - tan δ cos φ)]

Substitute the given values, we get;

Azimuth = arctan [(sin 105°25'10") / (cos 105°25'10" sin 45°50'40" - tan 88°14'26" cos 45°50'40")]

Azimuth = arctan [(0.9404) / (0.5580 - (- 0.4382))]

Azimuth = arctan (1.3904 / 0.9962)

Azimuth = arctan (1.3933)

Azimuth = 54°46'51"

Calculate the true bearing of line ABThe true bearing of line AB =

Azimuth + 180°The true bearing of line AB = 54°46'51" + 180°

= 234°46'51"

To know more about angle visit:

https://brainly.com/question/30147425

#SPJ11

There is no solution of the given ODE of the form y = x^n.

Hence, we cannot use the method of undetermined coefficients to solve the given ODE.

The solution of the linear homogeneous ODE:

(x^2)y''+3xy'+y=0 is as follows:

Given ODE is (x^2)y''+3xy'+y=0

We need to find the solution of the given ODE.

So,Let's assume the solution of the given ODE is of the form y=x^n

Now,

Differentiating y w.r.t x, we get

dy/dx = nx^(n-1)

Again, Differentiating y w.r.t x, we get

d^2y/dx^2 = n(n-1)x^(n-2)

Now, we substitute the value of y, dy/dx and d^2y/dx^2 in the given ODE.

(x^2)n(n-1)x^(n-2)+3x(nx^(n-1))+x^n=0

We simplify the equation by dividing x^n from both the sides of the equation.
(x^2)n(n-1)/x^n + 3nx^n/x^n + 1 = 0

x^2n(n-1) + 3nx + x^n = 0

x^n(x^2n-1) + 3nx = 0

(x^2n-1)/x^n = -3n

On taking the limit as n tends to infinity, we get,

x^2 = 0 which is not possible.

So, there is no solution of the given ODE of the form y = x^n.

Hence, we cannot use the method of undetermined coefficients to solve the given ODE.

To know more about undetermined coefficients visit:

https://brainly.com/question/32563432

#SPJ11

W = (P₂V₂ - P₁V₁) / (1 - n)

Performing the calculations will give you the absolute boundary work in kJ.

To calculate the absolute boundary work (W) in a polytropic process, we can use the following formula:

W = (P₂V₂ - P₁V₁) / (1 - n)

Given:

Mass of helium gas (m) = 6.7 kg

Specific gas constant for helium (R) = 2.0769 kJ/kg.K

Initial pressure (P₁) = 126.6 kPa

Initial temperature (T₁) = 133.7 °C = 133.7 + 273.15 K

Polytropic exponent (n) = 1.35

Final temperature (T₂) = 359.2 °C = 359.2 + 273.15 K

First, we need to calculate the initial volume (V₁) using the ideal gas law:

PV = mRT

Substituting the values:

V₁ = (mRT₁) / P₁

Next, we need to calculate the final volume (V₂) using the polytropic process equation:

P₁V₁^n = P₂V₂^n

Substituting the values:

V₂ = (P₁V₁^n) / P₂^(1/n)

Now, we can calculate the absolute boundary work:

W = (P₂V₂ - P₁V₁) / (1 - n)

Substituting the values:

W = (P₂V₂ - P₁V₁) / (1 - n)

To know more about volume visit:

brainly.com/question/28058531

#SPJ11

There are 1072 ways to choose 3 pieces of music, with at least 1 piece for piano using combinations and permutations.

The number of ways you can choose 3 pieces of music, with at least 1 piece for piano, can be calculated using combinations and permutations.

To solve this problem, we can break it down into two cases:

Case 1: Choosing 1 piece of music for piano and 2 pieces from the remaining pool.
In this case, you have 6 choices for the piano piece and then you need to choose 2 more pieces from the remaining pool of 17 (5 for violin and 7 for guitar). You can do this in C(17, 2) = 136 ways (where C stands for combination).

Case 2: Choosing 2 or 3 pieces of music for piano.
In this case, you have 6 choices for the first piano piece, and then you can choose either 1 or 2 more pieces from the remaining pool. For the remaining pieces, you have 16 options (5 for violin and 7 for guitar).
So, the total number of ways for case 2 is 6 * C(16, 1) + 6 * C(16, 2) = 6 * 16 + 6 * 120 = 936.

To find the total number of ways, we simply add the results from case 1 and case 2:
136 + 936 = 1072.

Therefore, there are 1072 ways to choose 3 pieces of music, with at least 1 piece for piano.

Learn more about Permutation :

https://brainly.com/question/1216161

#SPJ11

Given a page reference string and four frames, we can calculate the number of page faults for different page replacement algorithms. For the given string, the number of page faults would be calculated for the LRU (Least Recently Used), FIFO (First-In-First-Out), and Optimal replacement algorithms. The algorithm with the minimum number of page faults would be the most efficient for the given scenario.

LRU Replacement: The LRU algorithm replaces the least recently used page when a page fault occurs. For the given page reference string and four frames, we traverse the string and keep track of the most recently used pages.

When a page fault occurs, the algorithm replaces the page that was least recently used. By simulating this algorithm on the given page reference string, we can determine the number of page faults that would occur.

FIFO Replacement: The FIFO algorithm replaces the oldest page (the one that entered the memory first) when a page fault occurs. Similar to the LRU algorithm, we traverse the page reference string and maintain a queue of pages. When a page fault occurs, the algorithm replaces the page that has been in memory for the longest time (the oldest page). By simulating this algorithm, we can calculate the number of page faults.

Optimal Replacement: The Optimal algorithm replaces the page that will not be used for the longest period of time in the future. However, since this algorithm requires knowledge of future page references, we simulate it by assuming we know the entire page reference string in advance. For each page fault, the algorithm replaces the page that will not be used for the longest time. By simulating the Optimal algorithm on the given string, we can determine the number of page faults.

By calculating the number of page faults for each of the three algorithms, we can compare their efficiency in terms of the number of page faults generated. The algorithm with the minimum number of page faults would be the most optimal for the given page reference string and four frames.

To learn more about Optimal algorithm visit:

brainly.com/question/32099466

#SPJ11

Answer:

9

Step-by-step explanation:

[tex]h(5-2x) = x^2+3x+5 ---eq(1)[/tex]

To find h(3),

5 - 2x = 3

⇒ x = 1

sub in eq(1)

[tex]h(3) = 1^2+(3*1)+5\\\\[/tex]

h(3) = 9

ΔHmix, ΔSmix, and ΔGmix are terms used in thermodynamics to describe the changes in enthalpy, entropy, and Gibbs free energy associated with the mixing of substances.

To calculate ΔHmix, ΔSmix, and ΔGmix, we can use the following equations:

ΔHmix = RTχ(1-χ)
ΔSmix = -R[χlnχ + (1-χ)ln(1-χ)]
ΔGmix = ΔHmix - TΔSmix

Where:
- R is the ideal gas constant (8.314 J/(mol·K))
- T is the temperature in Kelvin (25 °C = 298 K)
- χ is the interaction parameter (0.14)

First, let's calculate the number of moles of polystyrene:
Mass of polystyrene = 1 g
Density of polystyrene = 1.05 g/cm³
Volume of polystyrene = Mass / Density = 1 g / 1.05 g/cm³ = 0.9524 cm³
Moles of polystyrene = Volume / Molar mass = (0.9524 cm³ / 1000 cm³) / (1×10^5 g/mol) = 9.524×10^-9 mol

Next, let's calculate the number of moles of toluene:
Density of toluene = 0.8669 g/cm³
Volume of toluene = Mass / Density = 1 mol / 0.8669 g/cm³ = 1.1537 cm³
Moles of toluene = Volume / Molar mass = (1.1537 cm³ / 1000 cm³) / (92.14 g/mol) = 1.253×10^-5 mol

Now, we can calculate the mixing enthalpy (ΔHmix):
ΔHmix = RTχ(1-χ)
ΔHmix = (8.314 J/(mol·K)) * (298 K) * (0.14) * (1 - 0.14)
ΔHmix = 285.6 J/mol

Next, let's calculate the mixing entropy (ΔSmix):
ΔSmix = -R[χlnχ + (1-χ)ln(1-χ)]
ΔSmix = -(8.314 J/(mol·K)) * [(0.14 ln(0.14)) + ((1-0.14) ln(1-0.14))]
ΔSmix = -3.108 J/(mol·K)

Finally, let's calculate the mixing free energy (ΔGmix):
ΔGmix = ΔHmix - TΔSmix
ΔGmix = 285.6 J/mol - (298 K) * (-3.108 J/(mol·K))
ΔGmix = 285.6 J/mol + 926.184 J/mol
ΔGmix = 1211.784 J/mol

Therefore, the calculated values are:
ΔHmix = 285.6 J/mol
ΔSmix = -3.108 J/(mol·K)
ΔGmix = 1211.784 J/mol

To know more about Thermodynamics visit:

https://brainly.com/question/33422249

#SPJ11

The  thermodynamic quantities are: ΔHmix = 7.82 kJ/mol, ΔSmix = -1.19 J/(mol·K), ΔGmix = 8.51 kJ/mol

To calculate ΔHmix, ΔSmix, and ΔGmix, we need to use the formulas for these thermodynamic quantities. Let's break down the calculations step by step:

Calculate the number of moles of toluene:
  Given the mass of toluene = 150 g
  Molecular weight of toluene = 92.14 g/mol
  Number of moles of toluene = mass / molecular weight
                           = 150 g / 92.14 g/mol
                           = 1.628 moles

Calculate the volume of polystyrene:
  Given the mass of polystyrene = 1 g
  Density of polystyrene = 1.05 g/cm^3
  Volume of polystyrene = mass / density
                       = 1 g / 1.05 g/cm^3
                       = 0.9524 cm^3

Calculate the volume of toluene:
  Given the density of toluene = 0.8669 g/cm^3
  Volume of toluene = mass / density
                    = 150 g / 0.8669 g/cm^3
                    = 173.125 cm^3

Calculate the total volume:
  Total volume = volume of polystyrene + volume of toluene
              = 0.9524 cm^3 + 173.125 cm^3
              = 174.0774 cm^3

Calculate the volume fraction of toluene:
  Volume fraction of toluene = volume of toluene / total volume
                           = 173.125 cm^3 / 174.0774 cm^3
                           = 0.9945

Calculate ΔHmix using the formula:
  ΔHmix = χ * (ΔH1 + ΔH2)
  ΔH1 is the heat of vaporization of toluene = 35.2 kJ/mol
  ΔH2 is the heat of fusion of polystyrene = 18.7 kJ/mol
  ΔHmix = 0.14 * (35.2 kJ/mol + 18.7 kJ/mol)
         = 7.82 kJ/mol

Calculate ΔSmix using the formula:
  ΔSmix = -R * (χ * ln(χ) + (1-χ) * ln(1-χ))
  R is the ideal gas constant = 8.314 J/(mol·K)
  ΔSmix = -8.314 J/(mol·K) * (0.14 * ln(0.14) + (1-0.14) * ln(1-0.14))
         = -1.19 J/(mol·K)

Calculate ΔGmix using the formula:
  ΔGmix = ΔHmix - T * ΔSmix
  T is the temperature in Kelvin = 25°C + 273.15 = 298.15 K
  ΔGmix = 7.82 kJ/mol - 298.15 K * (-1.19 J/(mol·K) / 1000)
         = 8.51 kJ/mol

Learn more about thermodynamic

https://brainly.com/question/33845440

#SPJ11