If the lever is frictionless, to raise the rock a distance of 0.13 m, then the boy has to move the lever to 0.72 m.
An external force that acts upon an object results in a motion of the object, then it is called a work done upon the object by that force.
Given that the external force on a lever is 225 N and on a rock is 1250 N. The distance of motion by the rock is 0.13 m.
Hence the work done by the lever will be equivalent to the work done by the rock to move a particular distance.
Work (Lever) = Work (Rock)
F(lever) x D (lever) = F (rock) x D (rock)
225x D(lever)= 1250 x0.13
D(lever) is 0.72 m
Hence we can conclude that the distance of the motion by the lever is 0.72 m.
To know more about the work:
brainly.com/question/3902440.
#SPJ4
What is the lever arm formula?
The distance that separates the force's line of action from its rotational axis is known as the lever arm. and the torque's magnitude is = N m.
τ = F x r
Signs:- Torque = τ
Force = F
Lever Arm Length = r
In many electromechanical driving systems, lever arms are used. Axles and spindles are nonrotating shafts, while transmission shafts are rotating components that move power and torque from one place to another. Shafts can be either hollow or solid. In gate drive applications, particularly for radial gates and vertical gates, hollow shafts are sometimes referred to as torque tubes.
This is so that they can transfer torque to a hoist winch, which is their main function in these gate drives. For gate drives, the shafting may be subjected to axial forces, torsion from transmitted torque, bending from transverse loads from gears, sprockets, and sheaves, and torsion owing to transmitted torque.
know more about torque here
https://brainly.com/question/25708791#
#SPJ4
he period of a wave is equal to the time it takes for one wavelength to pass by a fixed point. You stand on a pier watching water waves and see 10 wavelengths pass by in a time of 40 seconds. a. What is the period of the water waves?b. What is the frequency of the water waves?c. If the wavelength is 3 meters, what is the wave speed?
The period of water waves is 4 seconds. The frequency of water waves is 0.25 Hz. The wave speed is 0.75 m/s.
What is a period of waves and frequency?
Period of waves or wave period represents the time taken by the wave to complete one cycle. It is also defined as the time is taken for two successive crests or troughs (one wavelength) to pass through the specific point.
The wave period is measured in seconds. Hence, its unit is seconds (s). The period of a wave is the ratio of the wavelength and velocity. The wave period is inversely proportional to the frequency.
Frequency is defined as the number of waves passes through the medium in a given time. Frequency equals the number of cycles per second. The unit of frequency is hertz (Hz).
Frequency is inversely proportional to the wave period. If the frequency increases, the wave period decrease, and the wave period increases by decreasing the wave period.
The wave speed equals the product of wavelength and frequency. Wave speed is defined as the distance of wave travels in a given time. The unit of wave seed is m/s.
From the givens,
time = 40 seconds, wavelength = 10m
Wave period = time/wavelength
= 40/10
Wave period = 4 seconds.
Frequency = 1 / wave period
= 1 / 4
Frequency = 0.25 Hz.
Wave speed = wavelength × frequency
= 3×0.25
= 0.75 m/s
Wave speed = 0.75 m/s.
Hence, the wave period is 4s, the frequency is 0.25 Hz, and the wave speed is 0.75 m/s.
Learn more about Wave speed and Frequency:
https://brainly.com/question/16575577
#SPJ3
1 pts What is the work required to raise a 25.0 kg object from the surface of the Earth to a height of 3.33 m
The work required to raise a 25.0 kg object from the surface of the earth to a height of 3.33 m
Formula: F = 25.0, D = 3.33, and W =?
W = F x D
Putting values together equals 25.0 x 3.33 W = 83.25 j.
Work = force times distance, or W = Fd.
F = W/d for force
Distance: W/F = d
W = work, F = force, and D = distance.
The integral of such a force applied over a displacement distance is referred to as "work." When one engages in work, they are doing something that requires them to use their strength or force.
When energy is transferred to an item, it is considered to have undergone work in science.
The integral of such a force applied over a displacement distance is referred to as work. When one engages in work, they are doing something that requires them to use their strength or force.
When energy is transferred to an item, it is considered to have undergone work in science.
The physics formula for work
The physics equation or formula is:
W = Fd
Work (force times distance)
For force, F = W/d.
Distance: W/F = d
The scalar dot product of force and displacement also yields work.
FDCos = W
Work-related SI unit :
Joule is the SI unit of work (J). The work performed by a force of one newton operating over a distance of one meter is defined as one joule in this context. kgm2s-2 is the SI base unit of work.
Work can be defined as the quantity of energy that a force transfers. Calculate work Another name for physics is the joule calculator. Work is represented by the letter "W."
Work is defined as a motion that is caused by a resisting force and is quantified by the force's product into the motion component that is resolved in the force's direction. The size of it is ML2T-2.
Learn more about Strength here:
https://brainly.com/question/9367718
#SPJ4
(TCO A) The primary reason for networking standards is to
Student Answer:simplify cost accounting for networks. Make it more difficult to develop hardware and software that link different networks. Ensure that hardware and software produced by different vendors can work together. Ensure that all network components of a particular network can beprovided by only one vendor. Lock customers into buying network components from one vendor
Make sure that software and hardware developed by various manufacturers can cooperate.
What exactly do vendors mean?A vendor is generally anybody who buys and sells goods or services. A vendor purchases products and services to resale them to different companies or individuals. Several different vendors provide the goods that big box stores like Target buy at deep discounts and then resale at higher retail rates.
The five major types of vendors are manufacturers, wholesalers, merchants, services and maintenance providers, independent vendors, and trade show representatives. Suppliers are sometimes referred to as the first link in a supply chain because they exclusively conduct business with other businesses. Contrarily, a vendor is a business or person that purchases things from a company and then sells them to another party.
To learn more about vendors refer to:
brainly.com/question/24852211
#SPJ4
2. An airboat with mass 3.50 x 102 kg, including the passenger, has an engine that produces a net horizontal force of 7.70 x 102 N, after accounting for forces resistance. a. Find the acceleration of the airboat b. Starting from rest, how long does it take the airboat to reach a speed of 12.0 m/s2
The acceleration of the airboat which has a mass of 350 kg is 2.2 m/s²
The time the airboat takes to reach the speed of 12 m/s is 5.45 seconds
The mass of the airboat = 350 kg
The net horizontal force of the airboat = 770 N
The acceleration of the airboat can be found using the formula,
F = ma
where F is the force
m is the mass
a is the acceleration
Let us rearrange the above equation, we get
a = F/m
Let us substitute the known values in the above equation, we get
a = 770 / 350
= 2.2 m/s²
The time taken to reach the speed of 12 m/s is
a = v/t
where a is the acceleration
v is the velocity
t is the time taken
Let us rearrange the equation, we get
t = v/a
Let us substitute the known values in the above equation, we get
t = 12 / 2.2
= 5.45 seconds
Learn more about the force in
https://brainly.com/question/15321240
#SPJ4
A imple pendulum ha a period of 3 econd. If the value of ‘g’ i taken a 9. 98 m-2 calculate the length of the pendulum
Answer:
T (Period) = 2 π (L / g)^1/2 for a simple pendulum
L = g * T^2 / (4 π^2)
L = 9.98 m/s^2 * 9 s^2 / 39.5 = 2.27 m
A copper wire has a circular cross section with a raduis of 1.25mm. If the wire carries a current of 3.70A, find the drift speed of electron in this wire.
Answer: 0.043mm/s
Explanation:
The drift speed of electron in this wire will ba calculated as:
= I/nqA
= I/nqπr²
= 3.7/[(1.1 × 1^29) × (1.6 × 10^19) × (3.14 × 0.00125²)
= 4.3 × 10^-5
= 0.043mm/s
The drift speed of the electron in this wire is 0.043mm/s.
how would you describe the atmosphere to a friend.
-We are discussing the book Paulo's Parachute Mission-
Answer:
its a shield that can protect us from super hot rays and all though ita not that strong atleast we wont get burned to death lol :)
I NEED HELPWITH MY PHYSICS ASSIGNMENT
Answer:
dang this hard
Explanation:
i will try to help
A crate is carried in a pickup truck traveling horizontally at 15.0 m/s. The truck applies the brakes for a distance of 28.7 m while stopping with uniform acceleration. What is the coefficient of static friction between the crate and the truck bed if the crate does not slide
The truck bed and the crate's static coefficient of friction, assuming the crate doesn't slide, is 0.400.
In the event that the container does not slide, what is the coefficient of static friction between the crate and the truck bed?Between the truck bed and the crate, there is 0.64 coefficient of static friction. When the bed is in the position depicted, the truck must move quickly to the right in order to make the crate slide.
The coefficient of static friction can be calculated in what way?The resistive friction force (Fr) divided by the normal or perpendicular pushing force (N) yields the coefficient of friction, which is a numerical value. The formula fr = Fr/N is used to represent it.
To know more about static friction visit:-
https://brainly.com/question/13000653
#SPJ4
analisis morfologico palabra yo gane el primer premio
Answer:
eres raro jajaja pero eres realmente genial y ordenado espero que esto te ayude jajaja
Explanation:
Answer:
wait what.... what ever the person said before i answer lol
Explanation:
2. Why might it be beneficial for a photographer to have a polarizing filter for their camera when taking pictures outdoors
A polarizing filter can be beneficial for a photographer when taking outdoor pictures because it can reduce glare and reflections from surfaces such as water and glass.
it can also enhance colors, darken blue skies, and reduce the amount of light entering the lens, allowing for more even exposure. This can be especially useful in situations where the sun is very bright and can create harsh shadows and overexposed highlights. The polarizing filter can also reduce the amount of haze in the atmosphere, which can improve the overall clarity of the image. These effects can help a photographer capture more vivid and detailed images, making them stand out from the crowd.
to know more about polarizing filters refer to the link brainly.com/question/13963189
#SPJ4
Your twin sister (who has the same weight as you) and you decided to go up to a very tall building. You take the elevator straight up. Your twin sister decide to walk up the spiral stairway. Compare the gravitational potential energy of you and your sister, after you both reach the top. assuming that you and your friend have equal masses.
Both of you have the same amount of potential energy since your masses are the same.
Define potential energy?In physics, potential energy is the power that a substance retains as a result of its position in respect to other things, internal pressures, electric charge, or other substances. Potential energy is a type of stored energy that depends on the interactions of various system elements.
The potential energy of a spring rises when it is crushed or stretched. The potential energy of a steel ball increases if it is raised above the ground as opposed to falling to it. Potential energy is the name for the energy that exists in everything that is raised from rest and can be released at a later time.
To learn more about potential energy visit:
brainly.com/question/24284560
#SPJ4
Is acceleration greater going up or down a ramp?
The acceleration which is acting on the object which is moving on the ramp is same for both the motion whether is going upwards or moving downwards.
Rolling motion happens when an object roll over from a ramp or any other sloppy surface whether it is rough or smooth. many forces act on it at the same moment. also in many forces rolling tangential force and gravitational force is also acting on it at the same moment. in which the gravitational force is acting on it at a bigger pace and plays an important role in rolling of the object from the ramp or any other sloppy surface. here we can see that the only force that is making impact on the object is the gravitational force. Hence, by this information we consider that the acceleration which is acting on the object which is moving on the ramp is same for both the motion whether is going upwards or moving downwards.
Learn more about Rolling motion:
brainly.com/question/29568301
#SPJ4
What happens to the magnitude of the torque if the angle increases toward 90?
The magnitude of the torque will increase as the angle between the force and the line of action of the torque approaches 90 degrees.
Torque is a measure of the rotational force acting on an object and is defined as the product of the force and the distance from the axis of rotation to the point where the force is applied. The torque is also proportional to the sine of the angle between the force and the line of action of the torque.
When the angle between the force and the line of action of the torque is 0 degrees, the torque is zero, as the force is acting in the same direction as the line of action of the torque. As the angle increases, the torque increases and reaches its maximum value when the angle is 90 degrees, at this point the sine of the angle is 1, so the torque is at its maximum value.
In practical terms, if you imagine a door knob, when you push or pull the door knob closer to 90 degree angle with the door, it will be harder to open or close the door, than when you push or pull the door knob at a small angle.
To know more about Torque click below:
brainly.com/question/6855614#
#SPJ4
What additional kind of energy makes Cv larger for a diatomic gas than for a monatomic one?
O Charismatic energy
O Translational energy
O Heat energy
O Rotational energy
O Solar energy
Answer:
translational energy
Explanation:
because is diatomic
An electric heater draws a constant current of 6 amp, with an applied voltage of 220 V, for 24 h. Determine the instantaneous electric power provided to the heater, in kW
The instantaneous electric power provided to the heater will be 1.32 kW.
Electric power can be defined as the rate by which an electric circuit transfers the electrical energy. An electric heater is drawing a constant current which is equal to 6 ampere with an applied voltage of 220 volts for a duration of 24 hours.
To calculate the instantaneous power supplied to the electric heater,
Power = Voltage × Current
P = V × I
P = 220 × 6
P = 1320 W
To convert it into kW, we divide the value by 10³
= 1320/10³ = 1.32 kW
To know more about electric power here
https://brainly.com/question/1125269
#SPJ4
A leftward force of 7N is applied to a box while the force of friction is 3N. The weight of the box is 4N as is the normal force. Determine the net force, and its direction acting on the box. (Hint: draw a free body diagram to help you figure it out)
Answer:
0N
Explanation:
When you draw a free body diagram, You have a 7N arrow pointing left, and a 3N arrow pointing right. When you subtract the two, you still have a force of 4N on the left. However, seeing as how gravity is in play at a force of 4N, the two forces cancel out and you get 0N.
A container is filled to a depth of 24.0 cm with water. On top of the water floats a 34.0 cm thick layer of oil with specific gravity 0.900. What is the absolute pressure at the bottom of the container
The Absolute pressure at the bottom of the container filled with water which has a thick layer of oil on the top will be 2735.21 Pa.
Information given as:
Height (h) = 31 cm = 0.31 m
Acceleration due to gravity (g) = [tex]9.8 m/s^{2}[/tex]
Specific gravity of oil = 0.900
So density of oil (ρ)= [tex]0.9X1000 = 900 kg/m^{3}[/tex]
We know that absolute pressure is given by the formula, here
So absolute pressure will be equal to [tex]P_{o} = 1.01 X 10^{5} Pa[/tex]
So absolute pressure of the oil will be 2735.21 Pa
Learn more about acceleration due to gravity:
brainly.com/question/13860566
#SPJ4
In the four-stroke internal combustion engine, fuel is ignited during the ~A. Compression B. Power C. Intake D.~ Exhaust stroke.
Answer:
Explanation:
Compression
Answer:
The answer is power
Explanation:
The power stroke is when fuel is ignited
an explorer walks 22 km north, then 47 km at 55o south of east. what is her resultant displacement?
Answer:
Below
Explanation:
Vertical components
22 - 47 sin 55 = - 16.5 km
Horizontal components
47 cos 55 = 26.96
Use Pythagorean Theorem
d^2 = (-16.5)^2 + 26.96^2
d = 31.6 km
a car with a mass of 900kg how many is the car weight on earth?
Answer:
9000N
Explanation:
gravitational field strength of earth is approximately 10N/kg .
900kg×10N/kg
=9000N
If a bird lands on a tree, is that an example of speed, velocity, or acceleration?
Position Collisions
Scenario 1: Fatima and Alberta are playing catch. Fatima is standing at
the door, while Alberta is standing 8m away to the right. Fatima throws a
paper ball to the right with a speed of 2.4m/s. Alberta realizes that she is
to far away and runs to the left at 0.6m/s. When and where will Alberta meet
the paper ball?
Alberta will meet the paper ball 8m away from Fatima's position after 13.3 seconds.
What is the seconds?
Seconds is a unit of time and is the base unit of time in the International System of Units (SI). It is described as the length of 9,192,631,770 radiation periods that correspond to the change between the two hyperfine levels of the cesium-133 atom's ground state. One second is equal to 1/60 of a minute, 1/3,600 of an hour, 1/86,400 of a day, and 1/31,536,000 of a year.
Seconds are a unit of time that is equal to one sixty-fourth of a minute. It is the base unit of measurement for time in the International System of Units (SI). One second is equal to 1000 milliseconds or 0.000277778 minutes. Seconds can be used to measure very short periods of time, such as the time it takes for light to travel from one end of a football field to the other.
To learn more about seconds visit:
brainly.com/question/26524032
#SPJ1
A fish introduces more air into its swim bladder so that it rises toward the surface of the water. Which of the following statements best describes the situation? A The fish decreased its buoyant force by decreasing its density. B The fish increased its buoyant force by increasing its density. с The fish increased the buoyant force by reducing its density.
The situation will be describe with:
C. The fish increased the buoyant force by reducing its density.
THE SWIM BLADDERA swim bladder is an internal organ that some fish use to control their buoyancy. The fish can adjust the amount of gas in the swim bladder to make itself more or less dense than the water around it. In order to rise toward the surface of the water, the fish would need to decrease its density relative to the water, which it can do by increasing the amount of air in its swim bladder. This increase in air in the swim bladder reduces the fish's density, which in turn increases its buoyancy and allows it to rise to the surface.
There are different ways that a fish can control its buoyancy, and different species of fish may have different adaptations for doing so. Some fish may have other organs or structures that can be used to control buoyancy, such as lipids in their body tissue, or fins that can be used to control their position in the water.
Additionally, some fish may have the ability to change their shape or size in order to control their buoyancy, such as by swallowing air or by compressing their swim bladder. However, in general, the most common way for fish to control buoyancy is by adjusting the amount of gas in their swim bladder.
Learn more about swim bladder here:
https://brainly.com/question/14431269
#SPJ4
How do you prevent latency problems?
Latency problems can be prevented by not downloading multiple items at a time, not running multiple applications simultaneously, scanning for viruses, and not deleting the cache.
What causes latency problems?One of the principal causes of network latency is distance, specifically the distance between client devices making requests and the servers responding to those requests. Customers demand to communicate with technology in real time without any delays, hence low latency is essential. Users may stop using a platform altogether and switch to another application permanently if there are problems with severe latency and time delays.
How is latency measured?In milliseconds, latency reveals the strength of your connection within your network. For gaming, anything with a latency of 100ms or less is fine. However, the ideal range is 20–40 ms.
To learn more about latency visit:
brainly.com/question/14894222
#SPJ4
What does PWC mean?
Price Waterhouse and Coopers (sometimes it can also be 'Price Waterhouse and Coopers & Lybrand'!)
Here is some extra information I know about the PWC Company!:
Under the PwC brand, Price Waterhouse Coopers is a multinational professional services network of firms that operate as partnerships. PwC, together with Deloitte, EY, and KPMG, is the world's second-largest professional services network. It is one of the Big Four accounting companies.
If this helps, please mark me brainliest!
Have a wonderful day!
For a series circuit, as lights are added, the voltage across each bulb increases/ decreases/ remains the same ?
For a series circuit, as lights are added, the current across each bulb increases/ decreases/ or remains the same ?
For a series circuit, as lights are added, the current across each bulb decreases.
A 1.41-kg block slides across a rough surface such that it slows down with an acceleration of 1.10 m/s2. What is the coefficient of kinetic friction between the block and the surface
The coefficient of kinetic friction between the block and the surface is 0.11.
The coefficient of kinetic friction can be found using the equation:
friction = force of friction = coefficient of kinetic friction * normal force
The normal force is equal to the weight of the object, which can be calculated as weight = mass * acceleration due to gravity
The force of friction can be calculated using the equation:
friction = force of friction = coefficient of kinetic friction * weight
The coefficient of kinetic friction can be found by rearranging the equation and substituting the known values:
coefficient of kinetic friction = friction / weight
= (1.10 m/s2) / (1.41 kg * 9.8 m/s2)
= 0.11
So, the coefficient of kinetic friction between the block and the surface is 0.11.
Learn more about Kinetic friction here:
https://brainly.com/question/20241845
#SPJ4
Un movil de masa 12Kg sobre el cual estan actuando varias fuerzas F_1=48N, F_2=60N y F_3=30N Calcular la aceleracion con la cual se moveria el sistema, suponiendo que el roce es nulo
Answer:
Lamentablemente el problema está incompleto, pues no sabemos la dirección en la que se aplican las fuerzas. Por ello, voy a resolver el problema asumiendo dos casos. (abajo se puede ver una imagen donde se describe cada caso)
1) Todas las fuerzas están en la misma dirección.
Entonces la fuerza neta será la suma de las 3 fuerzas, entonces:
F = 48N + 60N + 30N = 138N
Y por la segunda ley de Newton sabemos que:
F = m*a
fuerza igual a masa por aceleración.
Entonces la aceleración está dada por:
a = F/m = 138N/12kg = 11.5 m/s^2
2) Segundo caso, suponemos que F1 es opuesta a F2 y F3
En este caso, la fuerza neta será:
F = F2 + F3 - F1 = 60N + 30N - 48N = 42N
En este caso, la aceleración será:
a = 42N/12kg = 3.5 m/s^2