Answer:
25000N
Explanation:
distance travelled(d)=500m
force(f)=20N
Power=0.4KW=0.4×1000Watt=400watt
Then,Time(T)=?
Now,
Power(P)=W/T
400=F×D/T.(w=f×d)
or, 400=20×500/T
or, 400=10000/T
or, T=10000/400
or,T=25 sec
Therefore,time taken=25 sec
it takes 10 J of energy to move 2 C of charge from point A to point B. How large is the potential difference between points A and B
Given the workdone and the quantity of the charge, the potential difference between points A and points B is 5 Volts.
What is potential difference?Potential difference is simply referred to as work done required to move a charge from point A to point B per unit charge.
It is expressed as;
V = W / q
Given the data in the question;
Work done W = 10JQuantity of charge q = 2CPotential difference V = ?We substitute our values into the exression above.
V = W / q
V = 10J / 2C
V = 5V
Therefore, given the workdone and the quantity of the charge, the potential difference between points A and points B is 5 Volts.
Learn more about potential difference here: https://brainly.com/question/23716417?referrer=searchResult
#SPJ2
A baseball player slides into home base and experiences coefficients of friction of μ8 = 0.63 and μk = 0.49. The normal force acting on the player is 660N. How much frictional force acts on the player?Round your answer to the nearest hundredth if necessary. Ff = ________ N
Answer:
323.4 N
Explanation:
Given that,
The coefficient of static friction, [tex]\mu_s=0.63[/tex]
The coefficient of kinetic friction, [tex]\mu_k=0.49[/tex]
We need to find the frictional force acting on the player. As the baseball player is sliding into home base, we will use the coefficient of kinetic friction to find the frictional force.
[tex]F=\mu _kN\\\\=0.49\times 660\\\\=323.4\ N[/tex]
So, the frictional force acting on the player is 323.4 N.
Select the correct answer.
What are the units for the spring constant, k?
OA newton meters
OB. newton seconds
OC. newtons/meter
OD. newtons/second
E. newtons/seconds
which one of the following is a correct statement......
1)increasing temperature will decrease a pressure of gas
2)increase in amount of gas will decrease the pressure of gas
3)increasing the volume of gas will decrease the pressure of gas
4)all of the above
Answer:
Just 3
Explanation:
I believe the other two are incorrect
Please HElp!!
Name five conductors and insulators
Answer:
Conductors- copper, aluminum, gold, and silver.
Insulators- glass, air, plastic, rubber, and wood.
Explanation:
Answer: 5 conductors are copper, aluminum, gold, iron, and silver and 5 insulators are glass, air, plastic, rubber, and wood.
1) A 40 kg girl gets on her 10 kg wagon on level ground with two 5 kg bricks. She throws the bricks horizontally off the back of the wagon one at a time at a speed of 7 m/s relative to herself. a) How fast does she go after throwing the second brick
Answer:
1.4 m/s
Explanation:
Assuming that the system is an isolated one, then we will conserve the linear momentum of the system so as to be able to solve the system for required quantities:
Using the conservation of momentum, we have,
initial momentum = final momentum
P(i) = P(f)
And from the question, we see that the system has no initial momentum
After throwing the first brick we have
(40 + 10 + 5)v2 + 5 * -7 = 0
55v2 - 35 = 0
55v2 = 35
v2 = 35/55
v2 = 0.63 m/s
Now, considering that she conserves momentum when she throws the second brick again, we then say
(40 + 10 + 5) * 0.63 = (40 + 10)v(f) + 5 * -7
55 * 0.63 = 50v(f) - 35
35 = 50v(f) - 35
50v(f) = 35 + 35
50v(f) = 70
v(f) = 70/50
v(f) = 1.4 m/s
A proton with an initial speed of 600,000 m/s is brought to rest by an electric field.1. What was the potential difference that stopped the proton?
2. What was the initial kinetic energy of the proton, in electron volts?
Answer:
(1) the potential difference that stopped the proton is 1878.75 V
(2) the initial kinetic energy of the proton is 1878.75 eV
Explanation:
Given;
initial speed of the proton, v = 600,000 m/s
mass of proton, m = 1.67 x 10⁻²⁷ kg
(1) The work done in bringing the proton to rest is given as;
[tex]W = eV[/tex]
Apply work energy theorem;
[tex]K.E =W\\\\ \frac{1}{2} mv^2 = eV\\\\V = \frac{mv^2}{2e}[/tex]
where;
V is the potential difference
[tex]V = \frac{1.67\times 10^{-27} \times\ 600,000^2}{2 \ \times \ 1.6 \times 10^{-19}} \\\\V = 1878.75 \ V[/tex]
(2) the initial kinetic energy of the proton, in electron volts;
[tex]K.E = \frac{1}{2} mv^2\\\\K.E = \frac{1}{2} \times \ 1.67\times 10^{-27} \times 600,000^2 = 3.006 \times 10^{-16} \ J\\\\K.E = \frac{3.006 \times 10^{-16} \ J \ \ eV}{1.6 \times 10^{-19} \ J} = 1878.75 \ eV[/tex]
The maximum value of the electric field in an electromagnetic wave is 2.0 V/m. What is the maximum value of the magnetic field in that wave
Answer:
The maximum value of the magnetic field in the given wave is 6.67 nT.
Explanation:
Given;
maximum value of the electric field, E₀ = 2.0 V/m
The maximum value of the magnetic field in the given wave is calculated as;
[tex]B_o = \frac{E_o}{c}[/tex]
where;
c is the speed of light = 3 x 10⁸ m/s
[tex]B_o = \frac{E_o}{c} \\\\B_o = \frac{2}{3 \ \times \ 10^8} \\\\B_o = 6.67 \ \times \ 10^{-9} \ T\\\\B_o = 6.67 \ nT[/tex]
Therefore, the maximum value of the magnetic field in the given wave is 6.67 nT.
a body of mass 1kg is made to oscillate on a spring of force constant 16 n/m calculate 1 the angular frequency 2 the frequency of oscillation
Explanation:
Given that,
Mass of a body, m = 1 kg
Force constant, k = 16 N/m
We need to find the angular frequency and the frequency of oscillation.
(a) The angular frequency of a body is given by :
[tex]\omega=\sqrt{\dfrac{k}{m}} \\\\=\omega=\sqrt{\dfrac{16}{1}} \\\\=4\ rad/s[/tex]
(b) The frequency of oscillation is given by :
[tex]f=\dfrac{\omega}{2\pi}\\\\f=\dfrac{4}{2\pi}\\\\=\dfrac{2}{\pi}\ Hz[/tex]
Hence, this is the required solution.
PLEASE HELP ME 20 POINTS Some metals have a molecular structure that makes them good conductors. Explain how understanding this relationship can help engineers make more powerful batteries.
PLEASE I KNOW THE STRUCTURE I JUST NEED HOW BY UNDERSTANDING THE RELATIONSHIP THEY CAN MAKE MORE POWERFUL BATTERIES.
PLEASE IM DYEING HERE I JUST NEED THIS ANSWER I WILL GIVE BRAINLIST AND 5 STARS A HEART WHATEVER JUST PLEASEEEEE.
Answer:
negative plus positive with energy = battery
Explanation:
Plants that respond to light are responding
to an:
a. internal stimulus
b. external stimulus
please answer
Answer:
The answer would be a
Explanation:
1) Andrea and Chuck are riding on a merry-go-round. Andrea rides on a horse at the outer rim of the circular platform, twice as far from the center of the circular platform as Chuck, who rides on an inner horse. When the merry-go-round is rotating at a constant angular speed, Andrea's tangential speed is which of the following?a) twice Chuck's.b) the same as Chuck's.c) half of Chuck's.d) impossible to determine.2) When the merry go round is rotating at a constant angular speed, Andrea's tangential speed is:______.a) twice Chuck's.b) the same as Chuck's.c) half of Chuck's.d) impossible to determine.
Explanation:
The tangential speed of Andrea is given by :
[tex]v=r\omega[/tex]
Where
r is radius of the circular path
ω is angular speed
The merry-go-round is rotating at a constant angular speed. Let the new distance from the center of the circular platform is r'
r' = 2r
New angular speed,
[tex]v'=r'\omega'\\\\v'=(2r)\omega\\\\v'=2r\omega\\\\v'=2v[/tex]
New angular speed is twice that of the Chuck's speed.
why was bowling one of the first racially integrated sports
Answer:
bowling was one of the first racially integrated sports because bowling alleys were primarily located in urban areas. Racial integration was inevitable since it was promoted by US Armed Forces during 1940s and its image as sport for the common man made it a choice of activity for Americans!!
Explanation:
The 1kg rock is tied to a string and swung in a circular path as shown. The 1 meter string is tied to a post, and during the motion, the string has a 30 angle with the post. The rock makes 100 rounds in 1 minute. The centripetal force on the rock is
Answer: 54.8
Explanation:
The centripetal force on the rock moving along the string is 104.66 N.
The given parameters;
the mass of the rock, m = 1 kgangle of inclination of the string, θ = 30⁰angular velocity of the rock, ω = 100 rev/minlength of the string, r = 1 mThe centripetal acceleration of the rock is calculated as follows;
[tex]\omega _f^2 = \omega _i^2 + 2\alpha (\theta)\\\\(100 \ \frac{rev}{\min} \times \frac{2\pi \ rad}{1 \ rev} \times \frac{1 \min}{60 \ s} )^2 = 0 + 2\alpha (30 ^0 \times \frac{\pi \ rad}{180^0} )\\\\109.69 = 1.048\alpha \\\\\alpha = \frac{109.69}{1.048} \\\\\alpha =104.66 \ rad/s^2[/tex]
[tex]a_c = \alpha \times r\\\\a_c = 104.66 \times 1 = 104.66 \ m/s^2[/tex]
The centripetal force on the rock is calculated as follows;
[tex]F_c = ma_c[/tex]
[tex]F_c = 104.66 \times 1\\\\F_c = 104.66 \ N[/tex]
Thus, the centripetal force on the rock moving along the string is 104.66 N.
Learn more here: https://brainly.com/question/20905151
Jack and Rob try to move the new couch. Jack pulls with 30N of force and Rob pushes with 25 N of force.
Net Force = (your answer)
Body Diagram or Explanation = (your answer)
Answer:
Fr = 55 [N]
Explanation:
We must perform a free body diagram to understand the forces acting on the couch. In the attached image we see the force that Jack exerts just like that of Rob acting in the same direction.
We must perform a summation of force on the X-axis, to determine the resulting force.
∑Fx = Fr
Fr = 30 + 25
Fr = 55 [N]
What is a
physical
property of
snowflakes?
Nose bleeding occurs as we move towards high altitude, why?
Answer:
Because as we climb higher the amount of oxygen in the air decreases and this makes the air thinner and dryer. And at higher altitudes the blood pressure inside of our body is more than the atmospheric pressure which forces the blood to come out from openings like the nose.
Explanation:
A tiny water droplet of radius . descends through air from a high building.
Calculate its terminal velocity. Given that for air = × − −− and density of the water = -3
Correct question is;
A tiny water droplet of radius 0.010 cm descends through air from a high building .Calculate its terminal velocity . Given that η of air = 19 × 10^(-6) kg/m.s and density of water ρ = 1000kg/ms
Answer:
1.146 m/s
Explanation:
We are given;
Radius; r = 0.010 cm = 0.01 × 10^(-2) m
η = 19 × 10^(-6) kg/m.s
ρ = 1000 kg/ms
The formula for the terminal velocity is given by;
V_t = 2r²ρg/9η
g is acceleration due to gravity = 9.8 m/s²
Thus;
V_t = (2 × (0.01 × 10^(-2))² × 1000 × 9.8)/(9 × 19 × 10^(-6))
V_t = 1.146 m/s
number 8 please i need help asap
How is a mesa formed
Mesas form by weathering and erosion of horizontally layered rocks that have been uplifted by tectonic activity. Variations in the ability of different types of rock to resist weathering and erosion cause the weaker types of rocks to be eroded away, leaving the more resistant types of rocks topographically higher than their surroundings. This process is called differential erosion.
Hope it helps!
How can music imitate nature?
Answer:
There are at least two ways contemporary music in America has made use of nature by directly making use of the sounds of nature as musical material, or else in works that desire to imitate nature "in its manner of operation." That is, they are constructed the way nature is, they work the way nature works, rather than sounding the way nature sounds.
Explanation:
Suppose that you take a 10 kg mass on the surface of the earth and then place it on the moon. What will
the mass of the object on the moon be?
Answer:
10 kg
Explanation:
The mass of an object does not change even if the amount of gravtiy changes.
Deduce the first
equation
of motion matematical method
Answer:
The answer is below
Explanation:
Equation of motion is a term in physics that is used in explaining the characteristics of a physical system concerning its motion while considering the period.
The First Equation of Motion is given as v = u + at
Here, a = acceleration, v = final velocity, u = initial velocity, and t = time
To deduce it algebraically, it is written as
a = (v - u) ÷ t
Therefore, it can be repositioned to => v = u + a * t
A ball is thrown straight up in the air. For which situations are both the instantaneous velocity and the acceleration zero?
a. on the way up
b. at the top of its flight path
c. on the way down
d. halfway up and halfway down
e. none of the above
Answer: e: none of the above.
Explanation:
For any object in the air, the gravitational acceleration will be always -9.8m/s^2, where the negative sign is because gravity pulls the object down.
The instantaneous velocity, as a function of time, for the case of the ball, is
V(t) = (-9.8m/s^2)*t + v0
Where v0 is the velocity at which the ball is thrown up.
The velocity will be zero when the ball is at the top of its flight pat, in that point the sign of the velocity changes, it stops being positive (so the ball stops going up) and becomes negative (so the ball starts to fall down).
Now, while the instantaneous velocity can be zero during the flight, the acceleration does not, it only will be zero when the object hits the ground. Then the only correct option will be e: none of the above.
Balboa Park in San Diego has an outdoor organ. When the air temperature increases, how does the fundamental frequency of the one of the organ pipes change?
a. increases
b. decreases
c. stays the same
d. is impossible to determine. (The thermal expansion of the pipe is negligible.)
Answer:
a. increases
Explanation:
Outdoor pipe organ is a musical instrument that is used to play music. It produces some soothing notes and is very peaceful to the ears. The organ pipe is the source of sound for the outdoor organ. And the length of the pipe determines the wavelength of the sound. When the air temperature of the surrounding is increased, the fundamental frequency of one of the organ pipes will be increased as the speed of the sound will increased.
In general, how did the water pressure in the tank change when mass was added to the fluid?
Answer:
As the height increases the pressure must increase.
Explanation:
When we add masses to the fluid, the amount of fluid in the tank increases, therefore its height increases and the pressure is described by the expression
P = ρ g h
where rho is constant for a given fluid and h is the height measured from the surface of the fluid.
As the height increases the pressure must increase.
What does a sound wave’s frequency tell you?
a - the number of vibrations per second an object is making
b - the loudness or softness of the sound from an object
c - the amplitude of the sound wave
d - the type of medium in which the sound is traveling
Answer:
The number of vibrations per second an object is making
Explanation:
We need to find the correct option for a sound wave’s frequency.
Frequency is the number of vibrations per second an object is making. It can be calculated as total no. of vibrations divided by time taken.
Its SI unit is Hertz and it is denoted by Hz.
Hence, the correct option is (a).
Does the air in a room or water in a pot have to be at a certain temperature to create convection? Yes or No? and Explain why?
Answer:
Yes
Explanation:
because that temperature creates the bulk movement of molecules due to increase in their kinetic energy
A force Fof 40000 lbf is applied to rod AC the negative Y-direction. The rod is 1000 inches tall. A Force P of 25 lbf is applied in the negative Z- direction at point E, and a force R of 75 ibf is applied in the negative Z-direction at point F. Rod AC has a diameter of 1 inch from A to ca diameter of 15 inches from 3 tic, and all fillet radii are 0.25 in. The rod is made of 1020 CD steel, and has a Sy of 135 ksi, a Sur of 150 ksi, and an ef = 0.15. Determine the effective stress at point B
Answer:
The answer is "effective stress at point B is 7382 ksi "
Explanation:
Calculating the value of Compressive Axial Stress:
[tex]\to \sigma y =\frac{F}{A} = \frac{4 F}{( p d ^2 )} = \frac{(4 x ( - 40000 \ lbf))}{[ p \times (1 \ in)^2 ]} = - 50.9 \ ksi \\[/tex]
Calculating Shear Transverse:
[tex]\to \frac{4v}{ 3 A} = \frac{4 (75 \ lbf + 25 \ lbf)}{ \frac{3 ( lni)^2}{4}}[/tex]
[tex]= \frac{4 (100 \ lbf)}{ \frac{3 ( lni)^2}{4}} \\\\ = \frac{400 \ lbf)}{ \frac{3 ( lni)^2}{4}} \\\\= 0.17 \ ksi[/tex]
[tex]= R \times 200 \ in - P \times 100 \ in = 12500 \ lbf \times\ in[/tex]
[tex]\to \sigma' =[ s y^2 +3( t \times y^2 + t yz^2 )] \times \frac{1}{2}\\\\[/tex]
[tex]= [ (-50.9)^2 +3((63.7)^2 +(0.17)^2 )] \times \frac{1}{2}\\\\=[2590.81+ 3(4057.69)+0.0289]\times \frac{1}{2}\\\\=[2590.81+12,173.07+0.0289] \times \frac{1}{2}\\\\=14763.9089\times \frac{1}{2}\\\\ = 7381.95445 \ ksi\\\\ = 7382 \ ksi[/tex]
Engineers are developing a process to produce phosphorus pentachloride.
Which two criteria are the most essential when developing this process?
Answer:
The two criteria that are most essential are options C and D
Explanation:
In trying to develop a new process/procedure for the commercial/industrial production of a particular substance (in this case phosphorus pentachloride), it is important that the workers that would operate the equipment required for this new procedure are able to operate it safely, i.e without fear of injury or losing one's life. If this fear is present or any adverse effect occurs, it would not only be counterproductive but would also make workers avoid using this procedure and may be forced to revert to previous safe procedure.
It is also essential for the new procedure to be able to get the most desired product out of the reactant, meaning the rate and amount of desired product (phosphorus pentachloride) that would be obtained from a given amount of reactant must be very high (a better upgrade when compared to the previous procedure). This is going to cause for a better amount of phosphorus pentachloride produced as against the previous amounts produced from previous procedure.
From the above, it can be deduced that options C and D are two criteria that are most essential when trying to develop a novel process to produce phosphorus pentachloride.
Answer: the guy above me is correct
Explanation: