As the balloon moves closer to the conductor, the electric field strength will increase and charges will continue to be redistributed.
A) When a positively charged balloon is brought near an originally uncharged conductor, the conductor does acquire a net charge but not an equal one to that of the balloon. This is due to the fact that the conductor and balloon have different charges and therefore, when the conductor is brought near the balloon, the electrons move within the conductor leading to a net charge. When the balloon is brought near the conductor, the positively charged balloon will polarize the conductor, attracting electrons from one side and repelling them from the other side.
This will cause a net charge to be induced in the conductor due to the movement of the electrons, even if the balloon doesn't touch the conductor. This movement of electrons can result in the production of an electric current, but the amount of charge on the conductor will be less than the amount of charge on the balloon.
B) Yes, the conductor will begin to cause electric fields at points external to the conductor. This is because the positively charged balloon will cause the conductor to polarize and create an electric field in thesurrounding area.
Since the balloon and the conductor have different charges, an electric field will be induced in the area around the conductor, causing charges to be redistributed in that region. The strength of the electric field will be proportional to the magnitude of the charge on the balloon and the distance between the balloon and the conductor. Therefore, as the balloon moves closer to the conductor, the electric field strength will increase and charges will continue to be redistributed.
Learn more about Electric here,
https://brainly.com/question/776932
#SPJ11
If 900 electrons are injected right at the center of a solid metal (conductor) ball. What happens?
Therefore, when 900 electrons are injected into the center of a solid metal ball, they will distribute themselves uniformly throughout the ball, resulting in an even distribution of negative charge. This distribution allows the ball to remain electrically neutral overall.
When electrons are injected into a conductor, they will quickly redistribute themselves in order to reach an electrostatic equilibrium. In the case of a solid metal ball, the electrons will spread out and distribute themselves uniformly throughout the entire volume of the ball. This is because electrons repel each other due to their negative charge.
In an electrically conductive material, such as a metal, the electrons are free to move within the material. They can easily flow and distribute themselves to achieve a state of electrostatic equilibrium. This means that the electrons will move away from each other as much as possible, spreading out evenly throughout the entire volume of the conductor.
Therefore, when 900 electrons are injected into the center of a solid metal ball, they will distribute themselves uniformly throughout the ball, resulting in an even distribution of negative charge. This distribution allows the ball to remain electrically neutral overall.
Learn more about electrostatic equilibrium here:
https://brainly.com/question/31947363
#SPJ11
What are advantages of using CMOS based op-amp that 741(BJT op
amp)
Using CMOS-based op-amps, such as those found in modern integrated circuits, offers several advantages over using a traditional BJT-based op-amp like the 741.
Here are some of the advantages of CMOS-based op-amps:
High input impedance: CMOS op-amps have extremely high input impedance, typically in the order of gigaohms. This high input impedance reduces the loading effect on the input signal, allowing for accurate and undistorted signal amplification. Low power consumption: CMOS op-amps consume significantly lower power compared to BJT op-amps. This makes them more energy-efficient, which is especially beneficial in battery-operated devices and applications where power consumption is a concern. Wide supply voltage range: CMOS op-amps can operate with a wide range of supply voltages, including low-voltage operation. This flexibility in supply voltage allows for compatibility with various power supply configurations and enhances the versatility of the op-amp. Rail-to-rail operation: CMOS op-amps typically offer rail-to-rail input and output voltage ranges. This means that the input and output signals can swing close to the power supply rails, maximizing the dynamic range and ensuring accurate signal amplification even for signals near the power supply limits Noise performance: CMOS op-amps tend to exhibit lower noise levels compared to BJT op-amps. This makes them suitable for applications that require high signal-to-noise ratios, such as audio amplification and sensor interfacing. Integration: CMOS op-amps are often part of larger integrated circuits that incorporate additional functionality, such as filters, voltage references, and analog-to-digital converters (ADCs). This integration simplifies circuit design, reduces component count, and improves overall system performance. Manufacturing scalability: CMOS technology is highly scalable, allowing for the production of op-amps with high levels of integration and miniaturization. This scalability enables the fabrication of complex analog and mixed-signal systems on a single chip, reducing cost and increasing system reliability.It's worth noting that while CMOS-based op-amps offer these advantages, BJT-based op-amps like the 741 still have their own merits and may be suitable for certain applications.
To learn more about analog-to-digital converters (ADCs) visit: https://brainly.com/question/20856996
#SPJ11
An electric dipole with dipole moment of lμ| = 6.2 x 10-30 Cm is placed in an electric lul field and experiences a torque of 1.0 × 10-6 Nm when placed perpendicular to the field. What is the change in electric potential energy if the dipole rotates to align with the field?
The change in electric potential energy when the dipole aligns with the field can be calculated using the formula ΔU = -τθ.
we can substitute values into the formula to calculate the change in electric potential energy (ΔU):
ΔU = -τθ
ΔU = -(1.0 × 10^-6 Nm) × (90°)
ΔU = -9.0 × 10^-8 Nm
Therefore, the change in electric potential energy when the dipole rotates to align with the field is -9.0 × 10^-8 Nm.
Energy is the capacity to do work or cause change. It exists in various forms, including kinetic, potential, thermal, electrical, and chemical energy. Energy is neither created nor destroyed but can be converted from one form to another. It powers our daily lives, from lighting our homes to fueling transportation. Sustainable and renewable energy sources are crucial for a cleaner and greener future.
Learn more about energy here:
#SPJ11
In an RL direct current circuit, when these elements are connected to a battery with voltage 1.36 V and the resistance of the resistor is 119 the current goes to 0.21 times the maximum current after 0.034 s. Find the inductance of the inductor.
Therefore, the inductance of the inductor is 11.73 H.
In an RL direct current circuit, when these elements are connected to a battery with voltage 1.36 V and the resistance of the resistor is 119 Ω, the current goes to 0.21 times the maximum current after 0.034 s.
We need to find the inductance of the inductor.In an RL circuit, the current is given by;$$I=I_{max}(1-e^{-\frac{t}{\tau}})$$Where τ is the time constant, $$\tau=\frac{L}{R}$$Now, when the current goes to 0.21 times the maximum current,
we can write;$$0.21I_{max}=I_{max}(1-e^{-\frac{t}{\tau}})$$Simplifying this equation,$$0.21=1-e^{-\frac{t}{\tau}}$$Solving for $$\frac{t}{\tau}$$We get;$$\frac{t}{\tau}=2.76$$Substituting the value of t and R we get;$$2.76=\frac{L}{R}(\frac{1}{0.034})$$$$L=0.034 \times 2.76 \times 119$$$$L=11.73 \text{ H}$$
Therefore, the inductance of the inductor is 11.73 H.
to know more about inductance...
https://brainly.com/question/17212673
#SPJ11
Consider this conversion factor, 1.91 Royal Egyptian Cubit = 1.00 meter. The length of one side of the base of the Great Pyramid at Giza measures approx. 2.30 x 10^2. meters. What is the length in Royal Cubits?
The length of one side of the base of the Great Pyramid at Giza measures approximately 438.7 Royal Egyptian Cubits.
To convert the length of the base of the Great Pyramid from meters to Royal Cubits, we can use the given conversion factor:
1.91 Royal Egyptian Cubit = 1.00 meter
First, let's set up a proportion:
1.91 Royal Egyptian Cubit / 1.00 meter = x Royal Egyptian Cubit / 2.30 x 10^2 meters
Cross-multiplying and solving for x, we get:
x = (1.91 Royal Egyptian Cubit / 1.00 meter) * (2.30 x 10^2 meters)
x ≈ 438.7 Royal Egyptian Cubit
To know more about Royal Egyptian Cubits
https://brainly.com/question/31941819
#SPJ11
A projectile is fired with an initial velocity of 29.37m/s at an angle of 33.03°. How high did it go?
Notes: Remember, a = g. Don't forget the units!
A projectile is fired with an initial velocity of 29.37m/s at an angle of 33.03°. The projectile reaches a maximum height of approximately 12.26 meters.
To determine the maximum height reached by the projectile, we can analyze the vertical motion independently. Let's break down the initial velocity into its vertical and horizontal components.
Given:
Initial velocity (v₀) = 29.37 m/s
Launch angle (θ) = 33.03°
Acceleration due to gravity (g) = 9.8 m/s²
First, let's find the vertical component of the initial velocity:
v₀y = v₀ × sin(θ)
v₀y = 29.37 m/s × sin(33.03°)
v₀y ≈ 15.52 m/s
Now, we can use the kinematic equation for vertical motion to find the maximum height (h):
v² = v₀² + 2aΔy
At the highest point, the vertical velocity becomes zero, so v = 0:
0² = (15.52 m/s)² + 2(-9.8 m/s²)Δy
Simplifying the equation:
0 = 240.1504 m²/s² - 19.6 m/s² Δy
19.6 m/s² Δy = 240.1504 m²/s²
Δy = 240.1504 m²/s² / 19.6 m/s²
Δy ≈ 12.26 m
Therefore, the projectile reaches a maximum height of approximately 12.26 meters.
To learn more about initial velocity visit: https://brainly.com/question/30935471
#SPJ11
Object A has a charge of −3μC and a mass of 0. 0025kg. Object B has a charge and a mass of +1μC and 0. 02 kg respectively. What is the magnitude of the electric force between the two objects when they are 0. 30meters away?
(30 points)
The magnitude of the electric force between two charged objects can be calculated using Coulomb's Law. Coulomb's Law states that the electric force between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
Let's denote the charge of Object A as q1 = -3μC, the charge of Object B as q2 = +1μC, and the distance between them as r = 0.30 meters.
The formula for the magnitude of the electric force (F) is given by:
F = k * |q1 * q2| / r^2
where k is the electrostatic constant, approximately equal to 9 × 10^9 N·m^2/C^2.
Substituting the given values into the formula, we have:
F = (9 × 10^9 N·m^2/C^2) * |-3μC * +1μC| / (0.30m)^2
Simplifying the expression, we get:
F = (9 × 10^9 N·m^2/C^2) * (3μC * 1μC) / (0.30m)^2
Converting the charges to coulombs and simplifying further, we have:
F = (9 × 10^9 N·m^2/C^2) * (3 × 10^(-6) C * 1 × 10^(-6) C) / (0.30m)^2
Calculating the expression, we find:
F = 9 × 3 × 1 / (0.30)^2 N
Simplifying further, we obtain:
F = 9 N
Therefore, the magnitude of the electric force between Object A and Object B, when they are 0.30 meters away from each other, is 9 Newtons.
Read more about Coulomb law here
brainly.com/question/506926
#SPJ11
The circuit in the figure consists of switch S, a 4.70 V ideal battery, a 40.0 MQ resistor, and an airfilled capacitor. The capacitor has parallel circular plates of radius 5.00 cm, separated by 4.50
To find the capacitance of the capacitor, we can use the formula C = ε₀A/d, where C is the capacitance, ε₀ is the permittivity of free space, A is the area of the plates, and d is the separation distance.
The capacitance of a capacitor is determined by the formula C = ε₀A/d, where C is the capacitance, ε₀ is the permittivity of free space (a constant value), A is the area of the plates, and d is the separation distance between the plates.
In this circuit, the capacitor is air-filled, so we can use the permittivity of free space as the value for ε₀. The area of the plates (A) is given by the formula A = πr², where r is the radius of the plates. The separation distance (d) between the plates is also provided.
To find the capacitance, we can substitute the given values into the formula C = ε₀A/d. Once we have the capacitance, we can use it to analyze the behavior of the circuit, such as determining the charge stored on the capacitor or the time constant of the circuit.
It's worth noting that an ideal battery is assumed in this circuit, meaning that the battery provides a constant voltage of 4.70 V regardless of the current flowing through the circuit.
Learn more about capacitance
https://brainly.com/question/30529897
#SPJ11
A 9.5 m long uniform plank has a mass of 13.8 kg and is supported by the floor at one end and by a vertical rope at the other so that the plank is at an angle of 35 ∘
. A 73.0−kg mass person stands on the plank a distance three-fourths (3/4) of the length plank from the end on the floor. (a) What is the tension in the rope? (b) What is the magnitude of the force that the floor exerts on the plank?
(a) The tension in the rope is 6,645.5 N.
(b) The magnitude of the force that the floor exerts on the plank is 6,114.3 N.
(a)
The given values are as follows: m = 13.8 kgL = 9.5 mθ = 35°M = 73.0 kgWe need to find the tension in the rope.
First, we will find the distance of the person from the end on the rope side:x = (3/4)L = (3/4) × 9.5 m = 7.125 m
Now, we can find the forces acting on the plank and person.
Let's calculate the force due to gravity acting on the person:
Fg = Mg
Fg = 73.0 kg × 9.8 m/s²
Fg = 715.4 N
The force due to gravity acting on the plank:
Fg' = mg
Fg' = 13.8 kg × 9.8 m/s²
Fg' = 135.24 N
The force exerted by the rope on the plank:
Fr = T
Fr = T sin θ
Fr = T sin 35°
The force exerted by the floor on the plank:
Ff = T cos θ + Fg'
Ff = T cos 35° + Fg'
Ff = T cos 35° + 135.24 N
The forces acting on the person can be represented as:
F1 = FgF1 = 715.4 N
The forces acting on the plank can be represented as:
F2 = T sin 35° + Fg' + Ff
F2 = T sin 35° + 135.24 N + T cos 35°
Now, we can use the equation of torque to find T. The equation of torque is given as follows:Στ = Iα
As the plank is uniform, we can find the moment of inertia of the plank. I = (1/3) mL²I = (1/3) × 13.8 kg × (9.5 m)²I = 929.45 kg m²
As the plank is in equilibrium, the net torque acting on it is zero. Therefore, we can write:
Στ = 0The torque due to the weight of the person:
F1(x/2)The torque due to the weight of the plank:
Fg'(L/2)The torque due to the tension in the rope:
Fr(L - x)Now, we can write the equation of torque:
Στ = F1(x/2) + Fg'(L/2) - Fr(L - x) = 0(715.4 N)(7.125 m/2) + (135.24 N)(9.5 m/2) - T sin 35°(9.5 m - 7.125 m) = 0
Simplify and solve for T:
T sin 35° = (715.4 N)(7.125 m/2) + (135.24 N)(9.5 m/2) - (9.5 m - 7.125 m)(135.24 N)T sin 35° = 3571.69 NT = 6,645.5 N
Therefore, the tension in the rope is 6,645.5 N.
(b) The force exerted by the floor on the plank is given as:
Ff = T cos 35° + Fg'
Ff = (6,645.5 N) cos 35° + 135.24 N
Ff = 6,114.3 N
Therefore, the magnitude of the force that the floor exerts on the plank is 6,114.3 N. Answer: (a) The tension in the rope is 6,645.5 N.
(b) The magnitude of the force that the floor exerts on the plank is 6,114.3 N.
To learn about magnitude here:
https://brainly.com/question/30337362
#SPJ11
When you drop a rock into a well, you hear the splash 0.9 seconds later. The sound speed is 340 m/s. How deep is the well ? (Hint: the depth will defiitely be less than a kilometer..) Number Units If the depth of the well were doubled, would the time required to hear the splash be greater than 1.8 S equal to 1.8 S less than 1.8 S
The depth of the well is 306 meters. If the depth of the well were doubled, the time required to hear the splash would be greater than 1.8 seconds. This is because the time taken for the sound to travel is directly proportional to the depth of the well.
To calculate the depth of the well, we can use the formula:
depth = (speed of sound) x (time taken for sound to travel)
Given that the speed of sound is 340 m/s and the time taken to hear the splash is 0.9 seconds, we can calculate the depth of the well:
depth = 340 m/s x 0.9 s
= 306 m
To know more about depth
https://brainly.com/question/13804949
#SPJ11
A 0.35 kg softball has a velocity of 11 m/s at an angle of 42° below the horizontal just before making contact with the bat. What is the magnitude of the change in momentum of the ball while it is in contact with the bat if the ball leaves the bat with a velocity of (a)16 m/s, vertically downward, and (b)16 m/s, horizontally back toward the pitcher? (a) Number ___________ Units _____________
(b) Number ___________ Units _____________
The change in momentum (ΔP) is a vector quantity that represents the difference between the initial momentum (Pi) and the final momentum (Pf) of an object. The correct answers are:
a) The magnitude of the change in momentum for case (a) is approximately 1.037 kg·m/s.
b) The magnitude of the change in momentum for case (b) is approximately 6.175 kg·m/s.
The change in momentum provides information about how the motion of an object has been altered. If ΔP is positive, it means the object's momentum has increased. If ΔP is negative, it means the object's momentum has decreased.
(a) For the final velocity (vf) of 16 m/s, vertically downward:
Calculate the initial momentum (Pi):
[tex]Pi = m * Vi_x * i + m * Vi_y * j\\Pi = 0.35 kg * 8.1875 m/s * i + 0.35 kg * 7.4802 m/s * j[/tex]
Calculate the final momentum (Pf):
[tex]Pf = m * vf * j\\Pf = 0.35 kg * (-16 m/s) * j[/tex]
Find the change in momentum (ΔP):
[tex]\Delta P = Pf - Pi[/tex]
Now, let's substitute the values and calculate the magnitudes:
[tex]|\Delta P| = |Pf - Pi|\\\\|\Delta P| = |0.35 kg * (-16 m/s) * j - (0.35 kg * 8.1875 m/s * i + 0.35 kg * 7.4802 m/s * j)|[/tex]
Performing the calculation, we get:
[tex]|/DeltaP| = 1.037 kg.m/s[/tex]
Therefore, the magnitude of the change in momentum for case (a) is approximately 1.037 kg·m/s.
Now, let's move on to case (b):
Calculate the initial momentum (Pi):
[tex]Pi = m * Vi_x * i + m * Vi_y * j\\Pi = 0.35 kg * 8.1875 m/s * i + 0.35 kg * 7.4802 m/s * j[/tex]
Calculate the final momentum (Pf):
[tex]Pf = m * (-vf) * i\\Pf = 0.35 kg * (-16 m/s) * i[/tex]
Find the change in momentum (ΔP):
[tex]\Delta P = Pf - Pi[/tex]
Substitute the values and calculate the magnitudes:
[tex]|\Delta P| = |Pf - Pi|\\\Delta P| = |(0.35 kg * (-16 m/s) * i) - (0.35 kg * 8.1875 m/s * i + 0.35 kg * 7.4802 m/s * j)|[/tex]
Performing the calculation, we get:
[tex]|\Delta P| = 6.175 kg.m/s[/tex]
Therefore, the magnitude of the change in momentum for case (b) is approximately 6.175 kg·m/s.
For more details regarding the change in momentum, visit:
https://brainly.com/question/6270239
#SPJ4
Consider that a 15.0 eV photon excites an electron on the n=8 level of He+. What is the kinetic energy of the electron after colliding with the photon?
Select one:
a. 13.15 eV
b. 7.58 eV
c. 13.79 eV
d. 0.85 eV
After colliding with a 15.0 eV photon, the kinetic energy of an electron on the n=8 level of He+ is 14.77 eV.
When a photon collides with an electron in an atom, it can transfer energy to the electron, causing it to become excited to a higher energy level. The energy transferred to the electron is equal to the difference in energy between the initial and final states.
In this case, the electron is initially on the n=8 level of He+. The energy of the photon is given as 15.0 eV. To find the kinetic energy of the electron after the collision, we need to determine the energy difference between the final state and the initial state.
The energy of an electron in the nth energy level of a hydrogen-like atom can be calculated using the formula E = -13.6/n^2 eV. Plugging in n=8, we find that the initial energy of the electron is -13.6/8^2 = -0.2375 eV. The kinetic energy of the electron after the collision is then given by the difference in energy: 15.0 eV - (-0.2375 eV) = 14.7625 eV. Rounding to two decimal places, we get 14.77 eV, which is the correct answer.
Learn more about kinetic energy here:
https://brainly.com/question/999862
#SPJ11
The position of a particle as a function of time is given by * = 2.71t + 4.269 + 0.88t2 ło m. Obtain the following at time tI need help finding the k-component of velocity and the k-component of acceleration. please go step by step or show your work because I'm really confused as to how to find these.
The k-component of velocity is 1.76 and the k-component of acceleration is also 1.76 of the particle whose position is defined as 2.71t + 4.269 + 0.88[tex]t^2[/tex]
Given the position function * = 2.71t + 4.269 + 0.88[tex]t^2[/tex], we can find the k-component of velocity by taking the derivative of the position function with respect to time (t). Let's denote the position function as s(t):
s(t) = 2.71t + 4.269 + 0.88[tex]t^2[/tex].
To find the velocity function, we differentiate s(t) with respect to t:
v(t) = ds(t) / dt = d/dt (2.71t + 4.269 + 0.88[tex]t^2[/tex]).
Taking the derivative of each term separately, we have:
v(t) = 2.71 + 1.76t.
The k-component of velocity is simply the coefficient of t, which is 1.76.
To find the k-component of acceleration, we differentiate the velocity function v(t) with respect to t:
a(t) = dv(t) / dt = d/dt (2.71 + 1.76t).
Taking the derivative of each term, we find:
a(t) = 1.76.
Therefore, the k-component of velocity is 1.76 and the k-component of acceleration is also 1.76
Learn more about velocity here :
https://brainly.com/question/30559316
#SPJ11
A 15.4 N impulse is applied to a 5.9 kg medicine ball that is at rest. How fast will the ball roll?
Given an impulse of 15.4 N, mass of 5.9 kg, and initial velocity of 0 m/s, the final velocity of the ball is calculated to be 2.61 m/s.
The given problem is of Impulse and Momentum. The Impulse is the product of Force and Time, while Momentum is the product of mass and velocity.The formula for impulse is given by: Impulse = Force × TimeThe formula for momentum is given by: Momentum = Mass × VelocityGiven, Impulse (J) = 15.4 N Mass (m) = 5.9 kg Initial velocity (u) = 0 m/s. Final velocity (v) = ? We know that, J = F × t=> F = J / tThe ball is initially at rest. Therefore, initial momentum, P1 = m × u = 0 kg m/sFinal momentum, P2 = m × v kg m/sBy the law of conservation of momentum,P1 = P2 => m × u = m × v=> u = vSo, we have,Momentum before = Momentum after => m × u = m × v=> v = u + J/m=> v = 0 + 15.4 / 5.9=> v = 2.61 m/sTherefore, the ball will roll with a velocity of 2.61 m/s.We have given impulse, mass, and initial velocity. Using the formulae of momentum, we can easily calculate the final velocity of the ball which comes out to be 2.61 m/s. The ball will roll with a velocity of 2.61 m/s in the direction of the impulse applied.For more questions on velocity
https://brainly.com/question/80295
#SPJ8
I need help I think is b what I’m not sure
Can you explain me ?
Answer: B
Explanation: We see the color black when no light is being reflected. Black absorbs all of the light unlike white which reflects all of it.
A car horn outdoors produces a sound intensity level LI of 90dB at 10 feet away. What is its intensity I at this first location? What is its I and LI at 20 feet away? What is its I and LI at 40 feet away? What is its I and LI at 80 feet away? What is the difference in dB at each location? ASSUME THAT THE SOUND PROPAGATES SPHERICALLY.
5Given, the sound intensity level (LI) = 90 dB, distance (r1) = 10 ft and the sound propagates spherically.We need to find the sound intensity at the first location I, and sound intensity level LI, at a distance of 20 ft, 40 ft, and 80 ft away from the source.
Using the formula to calculate sound intensity level:LI = 10 log(I/I0)Where I0 is the threshold intensity = 1 x 10^-12 W/m^2.Calculating the sound intensity at the first location I:LI = 10 log(I/I0)90 = 10 log(I/I0)9 = log(I/I0)I/I0 = 10^9I = I0 x 10^9Substituting the value of I0, we get:I = 1 x 10^-12 x 10^9 = 1 W/m^2The sound intensity at the first location I = 1 W/m^2.At 20 feet away from the source:
Using the inverse-square law formula:I1/I2 = (r2/r1)^2Where I1 = sound intensity at the first location, r1 = 10 ft, r2 = 20 ft.At 20 ft away, I2 = ?I1/I2 = (r2/r1)^2I2 = I1/ (r2/r1)^2I2 = 1/ (20/10)^2 = 1/4 = 0.25 W/m^2Sound intensity level LI at 20 feet away:LI = 10 log(I/I0)LI = 10 log(0.25/1 x 10^-12)LI = 10 log(2.5 x 10^11)LI = 10 x 11.4 = 114 dBThe sound intensity at 20 feet away I = 0.25 W/m^2 and sound intensity level LI = 114 dB.At 40 feet away from the source:Using the inverse-square law formula:I1/I2 = (r2/r1)^2Where I1 = sound intensity at the first location, r1 = 10 ft, r2 = 40 ft.At 40 ft away, I2 = ?I1/I2 = (r2/r1)^2I2 = I1/ (r2/r1)^2I2 = 1/ (40/10)^2 = 1/16 = 0.0625 W/m^2Sound intensity level LI at 40 feet away:LI = 10 log(I/I0)LI = 10 log(0.0625/1 x 10^-12)LI = 10 log(6.25 x 10^10)LI = 10 x 10.8 = 108 dB
The sound intensity at 40 feet away I = 0.0625 W/m^2 and sound intensity level LI = 108 dB.At 80 feet away from the source:Using the inverse-square law formula:I1/I2 = (r2/r1)^2Where I1 = sound intensity at the first location, r1 = 10 ft, r2 = 80 ft.At 80 ft away, I2 = ?I1/I2 = (r2/r1)^2I2 = I1/ (r2/r1)^2I2 = 1/ (80/10)^2 = 1/64 = 0.015625 W/m^2Sound intensity level LI at 80 feet away:LI = 10 log(I/I0)LI = 10 log(0.015625/1 x 10^-12)LI = 10 log(1.5625 x 10^10)LI = 10 x 10.2 = 102 dBThe sound intensity at 80 feet away I = 0.015625 W/m^2 and sound intensity level LI = 102 dB.Difference in dB at each location:LocationDifference in dBFirst location0 dB20 feet away6 dB40 feet away12 dB80 feet away18 dB
Learn more about Sound here,
https://brainly.com/question/16093793
#SPJ11
An air parcel is sinking 1 km. The temperature in the parcel increases by 10 degrees C, but the vapor pressure does not change. The vapor pressure in the parcel is 10hPa, and the saturation vapor pressure in the parcel is 20hPa. What is the relative humidity?
The relative humidity is 50%, indicating the air is holding half of the moisture it can hold at the current temperature, aiding in weather predictions.
Given that an air parcel is sinking 1 km, the temperature in the parcel increases by 10 degrees C, but the vapor pressure remains constant. The vapor pressure in the parcel is 10 hPa, and the saturation vapor pressure is 20 hPa within the parcel. To calculate the relative humidity, we use the formula: Relative Humidity = Vapor pressure / Saturation vapor pressure * 100.
Plugging in the given values, we have: Relative humidity = 10 / 20 * 100. Simplifying the equation, we find that the relative humidity is 50%.
A relative humidity of 50% indicates that the air is holding half the amount of moisture it is capable of holding at the current temperature. This measure is crucial in meteorology as it helps forecasters predict cloud formation, precipitation, and other weather phenomena.
Learn more about humidity
https://brainly.com/question/30765788
#SPJ11
What is the magnetic moment of the rotating ring?
The magnetic moment of a rotating ring is dependent on the current flowing through it, the area enclosed by the loop, and the angle between the magnetic field and the plane of the loop.
The magnetic moment of the rotating ring is dependent on the radius of the ring, the current passing through it, and the angular velocity of the ring. The magnetic moment of a ring that rotates at a constant angular speed in a magnetic field is given by the formula:μ = Iπr²where,μ = magnetic momentI = current flowing through the ringr = radius of the ringBy applying the Lorentz force,
the magnetic moment can be calculated as:μ = IAwhere,μ = magnetic momentI = current flowing through the ringA = area enclosed by the current loopWhen the ring is rotating, the magnetic moment is given by the formula:μ = IA cos(θ)where,μ = magnetic momentI = current flowing through the ringA = area enclosed by the current loopθ = angle between the magnetic field and the plane of the loopTherefore, the magnetic moment of a rotating ring is dependent on the current flowing through it, the area enclosed by the loop, and the angle between the magnetic field and the plane of the loop.
Learn more about Magnetic moment here,
https://brainly.com/question/27962324
#SPJ11
In a recent test of its braking system, a Volkswagen Passat traveling at 26.2 m/s came to a full stop after an average negative acceleration of magnitude 1.90 m/s2.
(a) How many revolutions did each tire make before the car comes to a stop, assuming the car did not skid and the tires had radii of 0.325 m?
rev
(b) What was the angular speed of the wheels (in rad/s) when the car had traveled half the total stopping distance?
rad/s
The Volkswagen Passat's braking system test involved determining the number of tire revolutions and the angular speed of the wheels under specific conditions. a) ≈ 87.53 revolutions b) Angular speed ≈ 8.29 rad/s.
(a) To find the number of revolutions each tire made before the car came to a stop, we can use the relationship between linear motion and rotational motion. The linear distance covered by the car before stopping can be calculated using the equation:
distance = initial velocity² / (2 * acceleration).
Substituting the given values, we find:
distance = (26.2 m/s)² / (2 * 1.90 m/s²) = 179.414 m.
Since each revolution covers a distance equal to the circumference of the tire (2π * radius), we can find the number of revolutions by dividing the distance covered by the circumference of the tire.
The number of revolutions =[tex]distance / (2\pi * radius) = 179.414 m / (2\pi * 0.325 m) \approx 87.53[/tex] revolutions.
(b) To determine the angular speed of the wheels when the car had travelled half the total stopping distance, we need to find the time it took for the car to reach that point. The distance travelled when the car had travelled half the total stopping distance is half of the total distance covered before stopping, which is 179.414 m / 2 = 89.707 m. Using the equation:
[tex]distance = initial velocity * time + (1/2) * acceleration * time^2[/tex]
For solve in time. Rearranging the equation and substituting the given values,
[tex]time = (\sqrt((initial velocity)^2 + 2 * acceleration * distance) - initial velocity) / acceleration[/tex]Substituting the values,
[tex]time = (\sqrt((26.2 m/s)^2 + 2 * 1.90 m/s^2 * 89.707 m) - 26.2 m/s) / 1.90 m/s^2 = 5.28[/tex] seconds.
The angular speed of the wheels can be calculated using the equation:
angular speed = (final angular position - initial angular position)/time.
Since the car travelled half the total stopping distance, the final angular position is half the number of revolutions calculated earlier.
Angular speed = (0.5 * 87.53 revolutions - 0 revolutions) / 5.28 s ≈ 8.29 rad/s.
Learn more about angular speed here:
https://brainly.com/question/29058152
#SPJ11
A Carousel (2000kg) spins at 2.5 revolutions-per-min. To stop it, brakes apply friction of 100N on the outermost edge of the carousel. Radius is 5m. Heigh is 1m. How long does it take for the carousel to stop? How much work is done by friction on the carousel to stop it?
Answer:Time taken by the carousel to stop = 0.24 sWork done by friction on the carousel to stop it = 34 J.
Given Data:The mass of the carousel (m) = 2000 kgRevolution per minute (rpm) = 2.5 rpmFrictional force (f) = 100 NRadius (r) = 5 mHeight (h) = 1 mTo find: How long does it take for the carousel to stop?How much work is done by friction on the carousel to stop it?Solution:Formula used:Centripetal force (f) = mv²/r ……………..(i)Where,m = mass of the objectv = velocityr = radius of the object.
The linear velocity of the carousel can be calculated as:v = (2πrn)/60Where,r = radius of the carouseln = rpm of the carouselPutting the given values in the above formula, we get:v = (2 x 3.14 x 5 x 2.5)/60v = 2.62 m/sThe centripetal force can be calculated as:f = mv²/rPutting the given values in the above formula, we get:f = 2000 x (2.62)²/5f = 21670 NTo find the time taken by the carousel to stop, we use the following formula:W = f x dWhere,W = Work done by frictionf = Frictional forced = Distance (deceleration)From the above formula, the distance (d) can be calculated using the following formula:v² = u² + 2asWhere,v = Final velocity (0 in this case)u = Initial velocity (2.62 m/s in this case)a = Acceleration (deceleration)The acceleration can be calculated as:a = f/mPutting the given values in the above formula, we get:a = 21670/2000a = 10.835 m/s².
Now, using the above calculated values, we get:v² = u² + 2asd = (v² - u²)/2ad = (0 - (2.62)²)/(2 x 10.835)d = 0.34 mThe work done by the friction can be calculated using the following formula:W = f x dPutting the given values in the above formula, we get:W = 100 x 0.34W = 34 JNow, the time taken by the carousel to stop can be calculated as:t = (v - u)/at = (2.62 - 0)/10.835t = 0.24 sTherefore, the time taken by the carousel to stop is 0.24 s.The work done by friction on the carousel to stop it is 34 J.Answer:Time taken by the carousel to stop = 0.24 sWork done by friction on the carousel to stop it = 34 J.
Learn more about Velocity here,
https://brainly.com/question/80295
#SPJ11
The intrinsic carrier concentration of silicon (Si) is expressed as n₁ = 5.2 x 101571.5 exp 2KT cm-3 where Eg = 1.12 eV. -Eg Determine the density of electrons at 30°C. n₁ = cm-3 Round your answer to 0 decimal places
The density of electrons at 30°C in silicon can be calculated using the equation n₁ = 5.2 x 10^15 * exp(-Eg/2KT) cm^-3, where Eg is the energy gap and K is the Boltzmann constant. The value of n₁ can be obtained by substituting the given values and solving the equation.
To calculate the density of electrons at 30°C in silicon, we use the equation n₁ = 5.2 x 10^15 * exp(-Eg/2KT) cm^-3, where Eg is the energy gap and K is the Boltzmann constant. In this case, the energy gap Eg is given as 1.12 eV. To convert this to units of Kelvin, we use the relationship 1 eV = 11,605 K. Therefore, Eg = 1.12 * 11,605 K = 12,997.6 K.
Substituting the values of Eg, K, and the temperature T = 30°C = 30 + 273 = 303 K into the equation, we have n₁ = 5.2 x 10^15 * exp(-12,997.6/2 * 303) cm^-3. Calculating this expression will give us the density of electrons at 30°C in silicon, rounded to 0 decimal places.
To know more about the density of electrons click here:
https://brainly.com/question/13152866
#SPJ11
corresponding quantities of heat absorbed and discharged? 23. In performing 100.0 J of work, an engine discharges 50.0 J of heat. What is the efficiency of the engine?
The efficiency of the engine is 66.67%.Note: The terms "corresponding quantities of heat absorbed and discharged" are not relevant to this problem.
In thermodynamics, efficiency is the amount of energy produced divided by the amount of energy consumed by a system. It can be defined as the ratio of output work to input energy. It is a dimensionless quantity that is typically expressed as a percentage.
In the given problem, the efficiency of an engine is to be calculated. The work done by the engine is 100.0 J, and the heat discharged is 50.0 J.
Therefore, the amount of energy consumed by the engine is the sum of the work done by the engine and the heat discharged by the engine, i.e., 100.0 J + 50.0 J = 150.0 J.The efficiency of the engine can be calculated by dividing the work done by the engine by the energy consumed by the engine. Therefore, the efficiency of the engine is given by:Efficiency = (work done by the engine / energy consumed by the engine) × 100% = (100.0 J / 150.0 J) × 100% = 66.67%.
Therefore, the efficiency of the engine is 66.67%.Note: The terms "corresponding quantities of heat absorbed and discharged" are not relevant to this problem.
to know more about engine
https://brainly.com/question/25257437
#SPJ11
A plane flies east 300 km for 1.00 hr, then turns north and continues another 300 km for 1.00 hr. What direction was the average acceleration of the plane? north northwest southeast southwest northeast
The plane initially flies east for 1.00 hour and then turns north for another 1.00 hour. The average acceleration of the plane is in the northeast direction.
The average acceleration of an object is determined by the change in its velocity over a given time interval.
In this case, the plane initially flies east for 1.00 hour and then turns north for another 1.00 hour.
To find the direction of the average acceleration, we need to consider both the change in velocity and the time interval.
The plane's initial velocity is solely in the east direction, and after the turn, its velocity has a northward component.
The change in velocity involves a change in direction as well as magnitude.
Since the plane's velocity vector changes from solely eastward to having both eastward and northward components, the average acceleration vector will point in a direction between east and north.
To determine the specific direction, we can consider the angle between the initial and final velocity vectors.
The angle between east and north is 45 degrees, which corresponds to the northeast direction. Therefore, the average acceleration of the plane is in the northeast direction.
In summary, the average acceleration of the plane is in the northeast direction.
Learn more about acceleration here:
https://brainly.com/question/30660316
#SPJ11
Thus, the waves traveling with a velocity of light and consisting of oscillating electric and magnetic fields perpendicular to each other and also perpendicular to the direction of propagation are called 7. In the modern world, humans are surrounded by EM radiations. The great scientist, was the first man to investigate how to transmit and detect EM waves. 8. In his experiment, a was applied to the two ends of two metal wires, which generated a spark in the gap between them. This spark resulted in the of EM waves. Those EM waves traveled through the air and created a spark in a metal coil located over a meter away. If an LED is placed in that gap, the bulb would have glowed. This experiment showed a clear case of EM wave and 9. James Clerk Maxwell (1831-1879) had laid out the foundations for EM radiation by formulating four mathematical equations called 10. The oscillating electric dipole can produce EM radiation in a perfectly sinusoidal manner. In this case, the_ will automatically generate a varying magnetic field perpendicular to it. 11. The wave velocity is_ times_ Based on this relationship, when frequency goes up, then the wavelength goes down.
Based on the information, the correct options to fill the gap will be:
electromagnetic wavesscientisttransmission, propagationMaxwell's equationselectric field, magnetic field, the speed of light, the wavelengthHow to explain the informationElectromagnetic waves are waves that travel at the speed of light and consist of oscillating electric and magnetic fields. The electric and magnetic fields are perpendicular to each other and also perpendicular to the direction in which the waves propagate.
When a potential difference (voltage) is applied to the two ends of two metal wires, a spark is generated in the gap between them. This spark results in the creation of electromagnetic waves.
Learn more about waves on
https://brainly.com/question/15663649
#SPJ4
The force of attraction that a 37.5 μC point charge exerts on a 115 μC point charge has magnitude 3.05 N. How far apart are these two charges?
The force of attraction that a 37.5 μC point charge exerts on a 115 μC point charge has magnitude 3.05 NThe two charges, 37.5 μC and 115 μC, are attracted to each other with a force of magnitude 3.05 N.
Coulomb's law states that the force of attraction or repulsion between two charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. Mathematically, it can be expressed as:
F = k * (|q1| * |q2|) / r^2
where F is the force of attraction or repulsion, k is the electrostatic constant (k = 8.99 × 10^9 N m^2/C^2), q1 and q2 are the charges, and r is the distance between the charges.
In this case, we have a force of 3.05 N, a charge of 37.5 μC (3.75 × 10^-5 C), and a charge of 115 μC (1.15 × 10^-4 C). We need to find the distance (r) between the charges.
Using Coulomb's law, we can rearrange the formula to solve for the distance:
r = √(k * (|q1| * |q2|) / F)
Substituting the given values:
r = √((8.99 × 10^9 N m^2/C^2) * ((3.75 × 10^-5 C) * (1.15 × 10^-4 C)) / (3.05 N))
Simplifying the expression:
r = √(39.18 m^2)
r ≈ 6.26 m
Therefore, the two charges are approximately 6.26 meters apart.
Learn more about magnitude here:
https://brainly.com/question/31022175
#SPJ11
An infinitely long solid insulating cylinder of radius a = 3 cm is positioned with its symmetry axis along the z-axis as shown. The cylinder is uniformly charged with a charge density p = 22 HC/m³. Concentric with the cylinder is a cylindrical conducting shell of inner radius b = 19 cm, and outer radius c = 22 cm. The conducting shell has a linear charge density λ = -0.47μC/m. R(0,d) P 2 P(d,d) 5) The charge density of the insulating cylinder is now changed to a new value, p' and it is found that the electric field at point P is now zero. What is the value of p'? HC/m³ Submit
The new charge density [tex]\(p'\)[/tex] of the insulating cylinder, the electric field at point P is set to zero by considering the electric fields due to both the insulating cylinder and the conducting shell. By equating the electric fields and solving the equation, the value of \(p'\) can be obtained.
To find the new charge density [tex]\(p'\)[/tex] of the insulating cylinder, we need to consider the electric field at point P due to both the insulating cylinder and the conducting shell. The electric field at point P is zero, which means the electric field due to the insulating cylinder and the electric field due to the conducting shell cancel each other out.
The electric field at point P due to the insulating cylinder can be found using Gauss's law. Since the cylinder is symmetric and has a uniform charge density, the electric field inside the cylinder is given by [tex]\(E = \frac{p}{2\epsilon_0}\)[/tex], where [tex]\(\epsilon_0\)[/tex] is the permittivity of free space
The electric field at point P due to the conducting shell is given by [tex]\(E = \frac{\lambda}{2\pi\epsilon_0}\left(\frac{1}{d}-\frac{1}{\sqrt{d^2+(b+c)^2}}\right)\), where \(d\)[/tex] is the distance from the center of the cylinder.
By setting these two electric field equations equal to each other and solving for [tex]\(p'\)[/tex], we can find the new charge density of the insulating cylinder.
Note: The values of [tex]\(d\)[/tex], [tex]\(b\)[/tex], and [tex]\(c\)[/tex] are not provided in the question, so the specific numerical value of [tex]\(p'\)[/tex] cannot be determined without that information.
To know more about electric field,
https://brainly.com/question/30544719
#SPJ11
The angular position of a point on the aim of a rotating wheel is given by θ = 2.3t + 4.72t² + 1.6t ³, where θ is in radians ift is given in seconds. What is the angular speed at t = 3.0 s? ________
What is the angular speed at t = 5.0 s? ________ What is the average angular acceleration for the time interval that begins at t = 3,0 s and ends at t = 5.0 s? ________
What is the instantaneous acceleration at t = 5.0 s?
________
The angular speed at t = 3.0 s is 73.82 rad/s, the angular speed at t = 5.0 s is 169.5 rad/s, the average angular acceleration for the time interval that begins at t = 3.0 s and ends at t = 5.0 s is 47.84 rad/s², and the instantaneous angular acceleration at t = 5.0 s is 57.44 rad/s².
The equation θ = 2.3t + 4.72t² + 1.6t³ describes the angular position of a point on the aim of a rotating wheel. In this equation, θ represents the angular position in radians, and t represents time in seconds.
Angular speed:
The angular speed is the rate of change of angular displacement. It can be calculated by differentiating the angular position equation with respect to time:
ω = dθ/dt = 2.3 + 9.44t + 4.8t²
Angular speed at t = 3.0 s:
Substituting t = 3.0 s into the angular speed equation:
ω = 2.3 + 9.44t + 4.8t² = 2.3 + 9.44(3.0) + 4.8(3.0)² = 73.82 rad/s
Angular speed at t = 5.0 s:
Substituting t = 5.0 s into the angular speed equation:
ω = 2.3 + 9.44t + 4.8t² = 2.3 + 9.44(5.0) + 4.8(5.0)² = 169.5 rad/s
Average angular acceleration:
The average angular acceleration is the change in angular speed per unit time.
α = (ω₂ - ω₁) / (t₂ - t₁)
During the time interval starting at t = 3.0 s and ending at t = 5.0 s,
t₁ = 3.0 s
t₂ = 5.0 s
ω₁ = 73.82 rad/s
ω₂ = 169.5 rad/s
Substituting these values into the average angular acceleration equation:
α = (ω₂ - ω₁) / (t₂ - t₁) = (169.5 - 73.82) / (5.0 - 3.0) = 47.84 rad/s²
Instantaneous angular acceleration:
The instantaneous angular acceleration is the rate of change of angular speed with respect to time. It can be calculated by differentiating the angular speed equation with respect to time:
α = dω/dt = d/dt (2.3 + 9.44t + 4.8t²) = 9.44 + 9.6t
Substituting t = 5.0 s into the instantaneous angular acceleration equation:
α = 9.44 + 9.6t = 9.44 + 9.6(5.0) = 57.44 rad/s²
Therefore, the angular speed at t = 3.0 s is 73.82 rad/s, the angular speed at t = 5.0 s is 169.5 rad/s, the average angular acceleration for the time interval that begins at t = 3.0 s and ends at t = 5.0 s is 47.84 rad/s², and the instantaneous angular acceleration at t = 5.0 s is 57.44 rad/s².
Learn more about angular speed at: https://brainly.com/question/25279049
#SPJ11
A 56.0 kgkg ice skater spins about a vertical axis through her body with her arms horizontally outstretched, making 1.50 turns each second. The distance from one hand to the other is 1.5 mm. Biometric measurements indicate that each hand typically makes up about 1.25 % of body weight.
a) What horizontal force must her wrist exert on her hand? Express your answer in newtons.
b) Express the force in part (a) as a multiple of the weight of her hand. Express your answer as a multiple of weight.
A ice skater making 1.50 turns per second with her arms horizontally outstretched exerts a horizontal force on her hand through her wrist. The force required was calculated to be approximately 667 N. This force is equivalent to about 156.9 times the weight of one hand.
a) The force required to maintain circular motion is given by:
F = mv²/r
where m is the mass of the ice skater, v is the speed of the ice skater, and r is the radius of the circular path. In this case, the radius is half the distance between the hands, or 0.75 m. The speed of the ice skater is equal to the circumference of the circular path divided by the period of one revolution:
v = 2πr/T = 2π(0.75 m)/(1.5 s) ≈ 9.42 m/s
The force required is therefore:
F = (56.0 kg)(9.42 m/s)²/(0.75 m) ≈ 667 N
b) To express the force in terms of the weight of her hand, we first need to calculate the weight of one hand:
weight of one hand = (1.25/100)(56.0 kg)/2 ≈ 0.4375 kg
Then, we can express the force as a multiple of the weight of one hand:
F = 667 N ÷ (0.4375 kg x 9.81 m/s²) ≈ 156.9 weight of one hand
Therefore, the horizontal force exerted by her wrist on her hand is approximately 667 N, and this force is equivalent to about 156.9 times the weight of one hand.
To know more about force, visit:
brainly.com/question/31046192
#SPJ11
At 600 kPa, the boiler produces wet steam (3 230 kg/hr) from source water at 44°C with a dryness fraction of 0.92. If 390 kg of coal with a 39 MJ/kg calorific value is used, calculate: 1.1. The thermal efficiency of the boiler. 1.2. The equivalent evaporation.
The thermal efficiency of a boiler is a measure of how effectively it converts the energy content of the fuel into useful heat energy. The equivalent evaporation provides a measure of the amount of water that would need to be evaporated to produce the same amount of steam. The thermal efficiency, we need to determine the amount of heat energy transferred to the steam and the energy input from the fuel.
To calculate the thermal efficiency of the boiler, we can use the equation:
Energy Input = Mass of fuel x Calorific Value
= 390 kg x 39 MJ/kg
= 15,210 MJ
Thermal Efficiency = (Output Energy / Input Energy) x 100
Energy Transferred = Mass Flow Rate of Steam x Enthalpy Difference
= 3,230 kg/hr x (h - [tex]h_f[/tex])
The output energy is the heat energy transferred to the steam, which can be calculated using the mass flow rate of steam (m), the enthalpy of the wet steam at the given pressure (h1), and the enthalpy of the feedwater ([tex]h_{fw[/tex]):
Output Energy = m x ([tex]h_1 - h_{fw[/tex])
The input energy is the energy content of the fuel, which can be calculated by multiplying the mass of the fuel (mf) by its calorific value (CV):
Input Energy = [tex]m_f[/tex] x CV
Now we can substitute the given values into the equations to calculate the thermal efficiency.
1.2. The equivalent evaporation is a measure of the amount of water that would need to be evaporated from and at 100°C to produce the same amount of steam as the actual process. It is calculated by dividing the mass flow rate of steam by the heat of vaporization of water at 100°C:
Equivalent Evaporation = m / [tex]H_{vap[/tex]
where [tex]H_{vap[/tex] is the heat of vaporization of water at 100°C.
By substituting the given values into the equation, we can calculate the equivalent evaporation.
The thermal efficiency of the boiler indicates how effectively it converts the fuel energy into useful heat, while the equivalent evaporation provides a measure of the amount of water that would need to be evaporated to produce the same amount of steam. These parameters are important for evaluating the performance and efficiency of the boiler system.
Learn more about thermal efficiency here:
https://brainly.com/question/14615056
#SPJ11
An object is thrown from the ground into the air at an angle of 45.0 ∗
from the horizontal at a velocity of 20.0 m/s. How far will this object travel horizontally?
When an object is thrown from the ground into the air at an angle of 45.0 degrees from the horizontal with a velocity of 20.0 m/s, it will travel a horizontal distance of approximately 40.0 meters.
To find the horizontal distance traveled by the object, we need to determine the time it takes for the object to reach the ground. Since the initial velocity of the object can be separated into horizontal and vertical components, we can analyze their motions independently.
The initial velocity in the horizontal direction remains constant throughout the object's flight.
At an angle of 45.0 degrees,
the horizontal component of the velocity is given by
v_x = v * cos(theta),
where v is
the initial velocity (20.0 m/s) and
theta is the launch angle (45.0 degrees).
Plugging in the values, we find
v_x = 20.0 m/s * cos(45.0) = 14.1 m/s.
To calculate the time of flight, we can use the vertical component of the initial velocity. At the highest point of its trajectory, the vertical velocity becomes zero, and the time taken to reach this point is equal to the time taken to fall back to the ground.
Using kinematic equations, we find
the time of flight (t) to be t = (2 * v_y) / g,
where v_y is the vertical component of the initial velocity and g is the acceleration due to gravity (approximately 9.8 m/s^2).
Substituting the values, we get
t = (2 * 20.0 m/s * sin(45.0)) / 9.8 m/s^2 ≈ 2.04 s.
Finally,
to calculate the horizontal distance (d),
we multiply the time of flight by the horizontal velocity:
d = v_x * t = 14.1 m/s * 2.04 s ≈ 28.8 meters.
However, since the object's trajectory is symmetric, the total horizontal distance traveled will be twice this value, resulting in approximately 40.0 meters.
Learn more about kinematic equations here:
https://brainly.com/question/24458315
#SPJ11