The pressure exerted by the cylinder is 93,630 Pa.
Given data:
Mass of cylinder (m) = 75 kg
Length of cylinder (l) = 2.5 m
Radius of cylinder (r) = 5.0 cm = 0.05 m
The pressure exerted by the cylinder can be calculated using the formula:
P = F/A where P is the pressure, F is the force and A is the area of the surface over which the force is applied.
Area of the circular end of the cylinder, A = πr²= π(0.05)²= 0.00785 m²
Weight of cylinder: W = mg where g is the acceleration due to gravity (9.8 m/s²)W = 75 × 9.8W = 735 N
Now, the force exerted on the ground by the cylinder is equal to the weight of the cylinder, so, F = 735 N
Thus, the pressure exerted by the cylinder is, P = F/A= 735/0.00785= 93,630 Pa
Therefore, the pressure exerted by the cylinder is 93,630 Pa.
To know more about pressure click here:
https://brainly.com/question/29830939
#SPJ11
a rock attached to a string swings in a vertical circle. which free body diagram could correctly describe the force(s) on the rock when the string is in one possible horizontal position?
The correct free body diagram that describes the forces on the rock when the string is in one possible horizontal position is B.
As the rock swings in a vertical circle, there are a number of forces acting upon it. These forces are gravity, tension and centrifugal force. When the rock is in a horizontal position, its weight will be perpendicular to the tension force. This makes the tension force the only force acting upon the rock in the horizontal position.
As a result, the correct free body diagram that describes the forces acting on the rock when the string is in one possible horizontal position is B.
Learn more about rock swings at https://brainly.com/question/30065997
#SPJ11
which of the following quantities represent mass? check all that apply. which of the following quantities represent mass?check all that apply. 12.0 lb l b 0.34 g g 120 kg k g 1600 kn k n 0.34 m m 411 cm c m
The quantities that represent mass are 12.0 lb, 0.34 g, 120 kg, and 411 cm.
Mass is the amount of matter that an object contains. It is a scalar physical quantity that can be determined by weighing an object. The standard unit of mass is kilogram (kg). Mass is constant regardless of the object's location in the universe.
The following are the quantities that represent mass:12.0 lb: It is a unit of mass used in the US and some other countries. It stands for pounds, which is equal to 0.45359237 kg.0.34 g: It is a unit of mass used in the metric system. It stands for grams, which is equal to 0.001 kg.120 kg: It is a unit of mass used in the metric system. It stands for kilograms, which is equal to 1000 g.411 cm: It is a unit of length used in the metric system. It stands for centimeters, which is equal to 0.01 m.
Learn more about metric system at:
https://brainly.com/question/634405
#SPJ11
bob is pushing a box across the floor at a constant speed of 1.4m/s m / s , applying a horizontal force whose magnitude is 55n n . alice is pushing an identical box across the floor at a constant speed of 2.8m/s m / s , applying a horizontal force. a) what is the magnitude of the force that alice is applying to the box?
The magnitude of the force that Alice is applying to the box is 110 N.
To calculate the force that Alice is applying, we need to use the equation F = ma. In this equation, F is the force applied, m is the mass of the box, and a is the acceleration of the box.
Since Alice is pushing the box at a constant speed of 2.8 m/s, the acceleration is 0, and the equation simplifies to F = 0 x m. Since the force must equal 0 when the acceleration is 0, the magnitude of the force that Alice is applying to the box is 0.
However, since Bob is pushing an identical box across the floor at a constant speed of 1.4 m/s, the acceleration is 0 and the equation simplifies to F = m x a. In this case, a is the acceleration of the box, which is 1.4 m/s.
Since we know that the magnitude of the force Bob is applying is 55 N, we can use the equation to calculate the force Alice is applying. 55 N = m x 1.4 m/s, which simplifies to m = 39.286.
We then substitute m back into the equation F = ma, so F = 39.286 x 1.4 m/s. This simplifies to F = 55.0 N, so the magnitude of the force Alice is applying is 55.0 N.
To know more about constant speed click on below link:
https://brainly.com/question/30151073#
#SPJ11
speed up a frictionless ramp ( 30.03) by a horizontal force . what are the magnitudes of (a) and (b) the force on the crate from the ramp?
The magnitudes of (a) and (b) the force on the crate from the ramp can be calculated using Newton's second law of motion. According to this law, the net force on an object is equal to the mass of the object multiplied by its acceleration.
In this case, (a) is the force of friction, which is equal to the coefficient of friction multiplied by the normal force. The normal force is equal to the mass of the crate multiplied by the acceleration of gravity (g). Therefore, the magnitude of (a) is equal to the coefficient of friction multiplied by the mass of the crate multiplied by the acceleration of gravity.
(b) is the force of the horizontal force applied to the ramp, which is equal to the magnitude of the horizontal force multiplied by the cosine of the angle of the ramp. The magnitude of (b) is therefore equal to the magnitude of the horizontal force multiplied by the cosine of the angle of the ramp.
To sum up, the magnitudes of (a) and (b) the force on the crate from the ramp can be calculated using Newton's second law of motion. (a) is the force of friction, equal to the coefficient of friction multiplied by the normal force. (b) is the force of the horizontal force applied to the ramp, equal to the magnitude of the horizontal force multiplied by the cosine of the angle of the ramp.
To know more about magnitudes refer here:
https://brainly.com/question/15681399#
#SPJ11
a coil is placed in a changing magnetic field and an emf is induced. what happens to the induced emf if the rate of change of magnetic field quadruples?
The induced EMF increases to four times its initial value if the rate of change of the magnetic field quadruples.
Faraday's law of electromagnetic induction specifies that an emf (electromotive force) is induced in a closed conductor or coil whenever there is a change in magnetic flux associated with it.
EMF = − d(ΦB) /dt
ΦB = BAcosθ
This equation suggests that emf is proportional to the rate at which magnetic flux ΦB is changing with respect to time. As a result, if the rate of change of the magnetic field quadruples, the induced EMF increases to four times its initial value.
Learn more about Faraday's law at https://brainly.com/question/1640558
#SPJ11
Harrison shows up to every team practice and game ready to help the team improve. Which sportsmanship trait does Harrison show?
Harrison shows the sportsmanship trait of commitment by consistently showing up to every team practice and game, ready to help the team improve. His dedication and reliability contribute to a positive team culture and demonstrate his commitment to the team's success.
Sportsmanship is the conduct or behavior of a person while participating in a sporting activity. It involves showing respect towards opponents, officials, and spectators, as well as following the rules and playing fair. Sportsmanship is about more than just winning; it's about respecting the spirit of the game and valuing the efforts of all participants, whether they win or lose. It requires showing humility in victory and grace in defeat.
Good sportsmanship also involves encouraging and supporting teammates, regardless of their performance. It means refraining from unsportsmanlike behavior such as trash-talking, cheating, or intentionally injuring opponents. Sportsmanship is an attitude and a set of values that promotes fair play, respect, and integrity in sports. It is essential for creating a positive and enjoyable sports environment for everyone involved.
To learn more about Sportsmanship visit here:
brainly.com/question/9234010
#SPJ4
Answer: Harrison shows the sportsmanship trait of commitment by consistently showing up to every team practice and game, ready to help the team improve. His dedication and reliability contribute to a positive team culture and demonstrate his commitment to the team's success.
Sportsmanship is the conduct or behavior of a person while participating in a sporting activity. It involves showing respect towards opponents, officials, and spectators, as well as following the rules and playing fair. Sportsmanship is about more than just winning; it's about respecting the spirit of the game and valuing the efforts of all participants, whether they win or lose. It requires showing humility in victory and grace in defeat.
Good sportsmanship also involves encouraging and supporting teammates, regardless of their performance. It means refraining from unsportsmanlike behavior such as trash-talking, cheating, or intentionally injuring opponents. Sportsmanship is an attitude and a set of values that promotes fair play, respect, and integrity in sports. It is essential for creating a positive and enjoyable sports environment for everyone involved.
Explanation: NOT MINE!
CREDITS : contexto1028
tome the cat is chasing jerry the mouse across a table surface 1.5 m high. jerry steps out of the way at the last second, and tom slides off the edge of the table at a speech of 5 m/s. where will tom strike the floor?
Tom will strike the floor at a distance of 1.28 m from the edge of the table.
Tom the cat is chasing Jerry the mouse across a table surface that is 1.5 m high. Jerry steps out of the way at the last second, and Tom slides off the edge of the table at a speed of 5 m/s. The position of Tom at different times can be analyzed by applying the kinematic equations. Tom is in free fall and his motion is governed by the equations of motion under gravity. Therefore, his initial velocity is zero, and acceleration due to gravity is -9.8 m/s². Let’s use the second equation of motion to calculate the time required for Tom to hit the ground.
v = u + at Where, v = final velocity = 0 m/s, u = initial velocity = 5 m/s, a = acceleration = -9.8 m/s², t = time taken
Solving for t, we get
0 = 5 + (-9.8)t
t = 0.51 s
Therefore, it takes 0.51 s for Tom to hit the ground. The distance traveled by Tom before hitting the ground can be calculated using the third equation of motion.
s = ut + ½ at² Where, s = distance traveled, u = initial velocity = 5 m/s, a = acceleration = -9.8 m/s², t = time taken = 0.51 s
Solving for s, we get
s = 5 × 0.51 + ½ (-9.8) × (0.51)²
s = 1.28 m
Therefore, Tom will strike the floor at a distance of 1.28 m from the edge of the table. The motion of Tom is an example of projectile motion because he is in free fall and there is no horizontal acceleration acting on him. Projectile motion is a type of motion where an object is thrown near the earth’s surface and moves along a curved path under the action of gravity.
For more such questions on Projectile motion.
https://brainly.com/question/11049671#
#SPJ11
two tuning forks produce sounds of wavelengths 3.4 meters and 3.3 meters. approximately what beat frequency is produced?
The beat frequency for two tuning forks producing sounds of wavelength 3.4 meters and 3.3 meters is 3 Hz.
Beat frequency is the difference between the frequencies of the two tuning forks:
beat frequency = |[tex]frequency_{1} - frequency_{2}[/tex]|
We know that wavelength = speed of sound / frequency,
so we can rearrange the formula to get:
frequency = speed of sound / wavelength
Using a speed of sound of approximately 343 m/s (at room temperature), we get:
[tex]frequency_{1}[/tex]= 343 / 3.4 = 100.88 Hz
[tex]frequency_{2}[/tex]= 343 / 3.3 = 103.94 Hz
Taking the difference and rounding to the nearest Hz, we get:
|100.88 - 103.94| ≈ 3 Hz
Therefore, the approximate beat frequency produced is 3 Hz.
To Practice more questions about 'beat frequency':
https://brainly.in/question/54417215
#SPJ11
Power is The amount of energy transferred per unit time The rate at which work is done Voltage multiplied by current The amount of energy supplied by a battery per unit time
Power is the rate at which work is done. Hence most appropriate option among the four given options is the second option which is "The rate at which work is done".
Power is the rate at which work is done or the rate of energy transfer. It is the amount of energy transferred per unit time. The unit of power is the watt (W), which is defined as one joule per second (J/s).
The definition "the amount of energy transferred per unit time" is incomplete because power can vary over time, and this definition only applies when the energy transfer is constant.
The definition "voltage multiplied by current" gives the electrical power in a circuit, but this definition is specific to electrical power, and power can also be in the form of mechanical, thermal, or other types of energy.
The definition "the amount of energy supplied by a battery per unit time" is a measure of the battery's power output, but it is specific to batteries and does not apply to other sources of power.
Therefore, the most complete and accurate definition of power is "the rate at which work is done."
Learn more about batteries:
https://brainly.com/question/30576475
#SPJ11
a photon of wavelength 571.43 nanometers is emitted by a source traveling awawy from you at 486 kilometers per second. at what wavelength in nanometers will yo uobserve the photon?
The observed wavelength of the photon is 572.11 nanometers.
The formula for the Doppler effect for a moving source is:
f' = f(1 - v/c)
λ' = λ(1 - v/c)
where λ is the wavelength of the emitted photon, and λ' is the observed wavelength.
Substituting the given values, we have:
λ' = 571.43 nm (1 - 486 km/s / 299792.458 km/s)
λ' = 572.11 nm
Wavelength is a fundamental concept in physics that refers to the distance between two adjacent peaks or troughs in a wave. It is usually denoted by the symbol lambda (λ) and is measured in meters (m) or other units of length.
Wavelength is a characteristic property of all types of waves, including electromagnetic waves such as light and radio waves, as well as mechanical waves like sound waves. In general, waves with shorter wavelengths have higher frequencies and carry more energy, while waves with longer wavelengths have lower frequencies and carry less energy. The concept of wavelength is important in many areas of physics, including optics, acoustics, and quantum mechanics. It plays a critical role in the study of wave-particle duality, diffraction, interference, and resonance phenomena.
To learn more about Wavelength visit here:
brainly.com/question/4112024
#SPJ4
in parallel circuits, when all resistors are of equal value the total resistance is equal to the value of one individual resistor . a. multiplied by the voltage b. divided by the voltage c. divided by the number of resistors d. multiplied by the number of resistors
In parallel circuits, when all resistors are of equal value, the total resistance is equal to the value of one individual resistor C. divided by the number of resistors.
The electrical circuits come in two primary forms - series and parallel. A parallel circuit is defined as a circuit in which the resistors are arranged in a way that they have the same potential difference or voltage across them. This implies that every component of the circuit gets the same amount of voltage. The basic principle of a parallel circuit is that every resistor gets the same amount of voltage.
When the voltage of the circuit is calculated, each component of the circuit has the same voltage. The voltage rating of each component is identical in a parallel circuit. According to Ohm's law, the resistance in a parallel circuit is inversely proportional to the current. The more the number of resistors in the circuit, the smaller the resistance of the circuit.
This means that the total resistance of a parallel circuit is always less than the resistance of the smallest resistor in the circuit. Therefore, when all the resistors are of equal value, the total resistance is equal to the value of one individual resistor divided by the number of resistors. In other words, R(total) = R(1) / n, where n is the number of resistors. Therefore the correct option is C
Know more about Ohm's law here:
https://brainly.com/question/796939
#SPJ11
10. What should be included in your first draft? A. The revised introduction and conclusion b. The changes from proofreading and editing C. The main idea and general support of the idea d. The details of research you've done
11. Use the following passage to answer the question. 1) Water is something most of us take for granted. (2) If we need a cold drink or want to take a shower, water is there. (3) If we want to water our yards or wash the dishes, water is there. (4) For many parts of the world, however, this is not true. (5) Water is not everywhere it's miles away. (6) To get water involves a long walk to and from the source. (7) Traditionally it is the job of women and children to spend their days searching for water. (8) Then, they gather it to bring back to their homes. (9) Sadly , even after that water is found, only some of its clean and safe enough to drink. (10) A number of groups across the globe have spent decades helping people get better access to water. (11) One such organization is called Water.org (12) It was started in 2009 by actor Matt Damon and Gary White , the co - founder of Water partners . (13) What have they accomplished so far Which sentence contains a word that should be capitalized ?
. (9) Sadly, even after that water is found only some of its clean and safe enough to drink . B. (4) For many parts of the world, however, this is not true. C. (10) A number of groups across the globe have spent decades helping people get better access to water. D. (12) was started in 2009 by actor Matt Damon and Gary White, the co-founder of Water partners .
12. Which of these statements should have a question mark added to the end ? A. Television shows usually have 13 episodes per season B. had to wonder why Lisa thought I was upset C. Why did Leonard decide not to go to lecture D. Mom is planning to make pancakes for breakfast
13. What punctuation mark is used to express strong emotions? . Apostrophe B. Quotation mark C. Question mark D. Exclamation point
14. To set off a quote inside a quote, what punctuation mark should you use A. Double quotation marks b. Single quotation marks c. Regular quotation marks d. No quotation marks
15. Which sentence is written correctly ? . My appointment is scheduled for monday, July 4. OB. My appointment is scheduled for monday july 4. C. My appointment is scheduled for Monday july 4. OD. My appointment is scheduled for Monday , July 4.
16. Which of the following sentences would most likely end in an exclamation point? A. The flock of geese was like a checkmark in the sky . Most people think Saturday is the best day to go to the festival . Until Leon gets here , cannot start cooking D. She couldn't believe it; she'd forgotten the cake
17. Which of the following sentences requires a colon to be correct ? A. When she decided to write a letter , she grabbed her pen, paper, stamps, and address book. . The new dessert recipe called for equal parts of sugarcreampeanut butter and crushed pecans . C. In his vacation suitcase, Jonathan packed two pairs of pants, four shirts, his swimsuit , and his favorite pajamas . D. She gathered all of her ingredients to make a smoothie strawberries blueberries , bananas , and yogurt .
18. What should be the first step in the writing process? A. Edit B. Plan . Proofread D. Research
19. Why is it a mistake to overuse exclamation points in your writing? A. It makes it feel as if you're shouting at the reader B. It confuses the reader as to what your main point is. C. It makes your writing lack emotion. D. It confuses the reader as to what your opinion is .
20. Please read the following sentence to answer the question. Sonya, my Mother, owns a bakery , and she makes the best brownies in town. Is the word mother capitalized correctly in the sentence ? . No , because it is a parenthetical element OB . Yes , since Sonya must be capitalized , so should mother C. Yes , since Sonya is the owner of the bakery . No , because a possessive pronoun comes before the word
1) The main idea and general support of the idea
2) Why did Leonard decide not to go to lecture
3) Exclamation point
4) Single quotation marks
5) My appointment is scheduled for Monday , July 4.
6) She couldn't believe it; she'd forgotten the cake
7) She gathered all of her ingredients to make a smoothie strawberries blueberries , bananas , and yogurt .
8) Research
9) It makes it feel as if you're shouting at the reader
10) No , because it is a parenthetical element
What are punctuation marks?Punctuation marks are symbols used in writing to clarify meaning and to indicate the structure and organization of written language. There are several different punctuation marks commonly used in English.
Period (.) - used to mark the end of a sentence.
Comma (,) - used to separate items in a list, or to separate clauses in a sentence.
Semicolon (;) - used to separate two independent clauses in a sentence.
Colon (:) - used to introduce a list, explanation, or quotation.
Question mark (?) - used to indicate a question.
Exclamation mark (!) - used to indicate strong emotion or emphasis.
Quotation marks (" ") - used to indicate direct speech or to enclose a quotation.
Learn more about parts of speech:https://brainly.com/question/12011328
#SPJ1
what is the equation of motion of the center of mass of the baton assuming the drum major throws it vertically upward
The equation of motion of the center of mass is given by x = v²/(2g).
The center of mass of an object is a point at which the object can be considered to be a particle with its entire mass concentrated at that point.
When an object moves through space, its center of mass also moves. In this question, we are asked to find the equation of motion of the center of mass of the baton when it is thrown vertically upward by a drum major.
The baton has a mass of m and that it is thrown vertically upward with an initial speed of v. The acceleration due to gravity is g.
We can find the maximum height that the baton reaches using the equation:v² = u² + 2gs
where v is the final velocity, u is the initial velocity, g is the acceleration due to gravity, and s is the maximum height that the baton reaches.
Since the baton is thrown vertically upward, the initial velocity is v0 = v and the final velocity is zero. So we have:v² = 2gsor:s = v²/(2g).
We can assume that the center of mass moves in a straight line from its initial position to its maximum height and then back down to its original position.
We can find the time taken for the baton to reach its maximum height using the equation:s = ut + (1/2)at²
where u is the initial velocity, a is the acceleration, and t is the time taken. In this case, u = v, a = -g (since the baton is moving upwards), and s = v²/(2g). So we have:v²/(2g) = vt - (1/2)gt²
Solving for t, we get:t = v/gNow we can write the equation of motion of the center of mass of the baton using the equation:x = ut + (1/2)at².
where x is the position of the center of mass, u is the initial velocity (zero), a is the acceleration due to gravity (g), and t is the time taken. So we have:x = (1/2)gt²
x = (1/2)(v/g)² = v²/(2g)The center of mass of the baton moves up to a maximum height of v²/(2g) and then comes back down to its original position.
Hence, The equation of motion of the center of mass is given by x = v²/(2g).
to know more about center of mass refer here:
https://brainly.com/question/28996108#
#SPJ11
should it be limited to 60% charge too when playing? or is it different for gaming than light tasks?
No, it is not necessary to limit the charge of your device to 60% when gaming. When it comes to gaming, it is recommended to charge your device between 40-90%.
This is because if your device is fully charged, it may reduce the lifespan of your battery and make it more vulnerable to heat-related damage.
As for light tasks such as web browsing and email, it is best to keep your device's charge between 30-60% in order to maximize battery life.
When it comes to gaming, you should make sure your device is not exposed to extremely high temperatures or charged beyond the recommended range.
Overcharging can damage the battery and lead to overheating which can reduce the performance of your device.
It is important to check the power settings of your device to ensure that your device is not wasting too much power. You can do this by going to the Settings of your device and accessing the Battery menu.
From there you can check what apps are draining the most power and set up the device to reduce power usage.
It is important to maintain the charge of your device in the recommended range while playing games, between 40-90%.
Doing so will help ensure the longevity of your battery and reduce the risk of heat-related damage. Additionally, you should keep an eye on your power settings to ensure that your device is not wasting too much power.
to know more about charge refer here:
https://brainly.com/question/11944606#
#SPJ11
What are the two qualities required for a healthy relationship
A good relationship must possess the attributes of communication and trust. Without trust, there can be no intimacy, and without communication, there can be no understanding.
This is a true expression of the truth. In order to build a solid and lasting connection between two individuals, communication and trust are essential elements of a good relationship.
Absolutely! Relationships that lack open and honest communication, as well as trust, are likely to be unstable and can lead to misunderstandings, conflicts, and even a breakdown of the relationship over time. Building a strong foundation of trust and communication can help ensure that a relationship can withstand challenges and grow stronger over time.
learn more about good relationship here:
https://brainly.com/question/30155313
#SPJ4
a 100 ohm resistor is connected in series with a 300 ohm resistor. what is the equivalent resistance?
Answer:
Explanation:
Durante as aulas, os estudantes da 3ª série deveriam escolher uma entre as três atividades físicas possíveis, sendo elas: natação, futsal e dança. Na turma, 25% escolheram dança, 15% escolheram natação, e os outros 24 estudantes escolheram futsal. Podemos afirmar que, nessa turma, existe um total de:
A) 64 alunos
B) 55 alunos
C) 48 alunos
D) 45 alunos
E) 40 alunos
If a 100-ohm resistor is connected in series with a 300-ohm resistor, Then the equivalent resistance of the circuit is 400 ohm.
Resistance in electrical circuits is a measure of how much a component or material opposes the flow of electric current through it. It is denoted by the symbol R and is measured in units called ohms, represented by the Greek letter omega (Ω).
When resistors are connected in series, their resistances add up to give the total or equivalent resistance of the circuit.
Now, to find the equivalent resistance of a circuit with a 100-ohm resistor and a 300-ohm resistor in series, we simply add their resistances together:
Equivalent resistance = 100 ohm + 300 ohm
Equivalent resistance = 400 ohm
Therefore, the equivalent resistance of the circuit is 400 ohms.
To learn more about resistors in a series click:
https://brainly.com/question/9049762
#SPJ2
determine the resistance of the tungsten filament in a 85- w 120- v incandescent lightbulb at its operating temperature of about 2800 k .
The resistance of the tungsten filament in an 85-watt, 120-volt incandescent light bulb at its operating temperature of about 2800 K is approximately 1.20 Ω.
R = [tex]\frac{V^2}{P}[/tex]
[tex]I = \frac{P}{V} = \frac{85 W}{ 120 V} = 0.708 A[/tex]
The resistivity of tungsten at 20°C is about 5.6 x [tex]10^{-8}[/tex] Ωm.
The cross-sectional area of the tungsten filament can be calculated using the formula:
A = (pi x d²) / 4
where d is the diameter of the filament. Let's assume the diameter of the filament is 0.1 mm (or 1 x [tex]10^{-4}[/tex] m).
A = (pi x (1 x [tex]10^{-4}[/tex])²) / 4 = 7.85 x [tex]10^{-9} m^2[/tex]
R = (rho x L) / A
R = (5.6 x [tex]10^{-8}[/tex] Ωm x 3 x [tex]10^{-2}[/tex] m) / 7.85 x [tex]10^{-9} m^2[/tex] = 0.215 Ω
Now we can calculate the resistance of the tungsten filament at its operating temperature of 2800 K using the formula:
R' = R x (1 + alpha x deltaT)
R' = 0.215 Ω x (1 + 4.5 x [tex]10^{-3} k^{-1}[/tex]x 2507 K) = 1.20 Ω
Resistance arises due to the interactions between charged particles (such as electrons) and the atoms and molecules that make up the material. These interactions cause the charged particles to collide with other particles, and as a result, lose some of their energy, which hinders their flow through the material.
The amount of resistance depends on several factors, including the type of material, its dimensions, and its temperature. Materials that are good conductors of electricity, such as metals, have low resistance, while insulators have high resistance.
Resistance plays an important role in many electrical applications, including the design of electrical circuits and the operation of electronic devices. It can be controlled and manipulated through the use of various components, such as resistors, which are used to regulate the flow of current in a circuit.
To learn more about Resistance visit here:
brainly.com/question/30799966
#SPJ4
what is the component vr of velocty vector v along the radial direction from the radar gun to the car
The component vr of velocity vector v along the radial direction from the radar gun to the car is the component of the velocity that is in the direction of the radial line that connects the radar gun to the car.
It can be calculated by taking the dot product of the velocity vector and the unit vector of the radial line.
The unit vector of the radial line is a vector that has a magnitude of one and that is pointing in the direction of the radial line.
The dot product of two vectors is equal to the magnitude of the first vector multiplied by the projection of the second vector on the first vector.
Thus, the component of velocity vr along the radial line is calculated by taking the magnitude of v multiplied by the projection of the unit vector of the radial line on v.
The component vr can be used to determine the speed of the car from the radar gun. The speed of the car is equal to the magnitude of vr divided by the speed of light.
By knowing the speed of the car, the speed limit can be compared to it in order to determine if the car is driving at a legal speed.
to know more about vector refer here:
https://brainly.com/question/24256726#
#SPJ11
a charged ball of -3e-6 coulombs moving at 9 m/s moves into a magnetic field of 3 tesla. the magnetic field is oriented perpendicular to the velocity of the charged ball. what is the magnitude of the force on the ball?
The magnitude of the force on the ball is 8.1e-5 N.
The force on a charged particle moving in a magnetic field is given by the formula:
F = q(v x B)
F = |-3e-6| x |9| x |3| = 8.1e-5 N
Force is a quantitative description of the interaction between objects that causes a change in motion or deformation. It is measured in units of newtons (N) and is represented by a vector with both magnitude and direction.
There are four fundamental forces in nature: gravitational, electromagnetic, strong nuclear, and weak nuclear forces. Gravity is a force that pulls objects towards each other, while electromagnetic forces are responsible for the attraction or repulsion between electrically charged objects. The strong and weak nuclear forces govern the interactions between particles within the atomic nucleus.
To learn more about Force visit here:
brainly.com/question/13191643
#SPJ4
a weight hanging from a spring will remain hanging until the weight is pulled down and released. when the weight is released the spring will bounce up and down. which of newton's laws explains why the spring will bounce?
This principle can be observed in other everyday scenarios, such as jumping on a trampoline or the recoil of a gun after firing. Newton's Third Law of Motion is a fundamental principle in classical mechanics and explains why the spring will bounce when the weight is released.
The bouncing of the weight when released is explained by Newton's Third Law of Motion, which states that for every action there is an equal and opposite reaction. When the weight is released, the spring exerts an equal and opposite force on the weight, propelling it upwards and causing it to bounce. This is because when the weight is pulled down, it compresses the spring, storing potential energy. When the weight is released, the spring decompresses and the potential energy is released, propelling the weight in the opposite direction.
To learn more about Newton's Third Law ;
https://brainly.com/question/25998091
#SPJ11
* what should be used to clean grease or carbon tracks from capacitors or coils that are used in magnetos?
To clean grease or carbon tracks from capacitors or coils that are used in magnetos, use a good quality electrical contact cleaner. Electrical contact cleaners can remove any dirt, grease, or carbon tracks that may have accumulated on the coils and capacitors used in magnetos.
What are capacitors?A capacitor is a device that stores electric charge. It's a passive electrical component that can store energy in an electric field. Capacitors are widely used in electronic circuits for a variety of purposes, including storing electrical energy, separating DC signals from AC signals, and tuning radio frequencies.
A magneto is an electrical generator that converts mechanical energy into electrical energy. It's a type of alternator that is self-contained and does not require a separate power source. Magnetos are used in internal combustion engines, such as those found in automobiles, motorcycles, and aircraft.
To know more about capacitors:
https://brainly.com/question/17511060
#SPJ11
find the net force on a 30.0 nc charge located at the origin by two other charges. one is -50.0 nc located at (-5.0 m, 2.0 m) and 40.0 nc located at (3.0 m, 1.0 m).
The net force on a 30.0 nc charge located at the origin by two other charges is the vector sum of the forces exerted by the two other charges. The force exerted by the first charge, -50.0 nC located at (-5.0 m, 2.0 m), is given by:
F1 = (k*q1*q2)/r2, where
k = 8.99 x 109 N m2/C2q1 = -50.0 ncq2 = 30.0 ncr = square root of (5.02 + 2.02) = 5.385Therefore,
F1 = (8.99 x 109 N m2/C2)*(-50.0 nc)*(30.0 nc)/(5.3852) = 2.38 x 10-2 N
Similarly, the force exerted by the second charge, 40.0 nc located at (3.0 m, 1.0 m), is given by:
F2 = (k*q1*q2)/r2, where
k = 8.99 x 109 N m2/C2q1 = 40.0 ncq2 = 30.0 ncr = square root of (3.02 + 1.02) = 3.162Therefore,
F2 = (8.99 x 109 N m2/C2)*(40.0 nc)*(30.0 nc)/(3.1622) = 4.58 x 10-2 N
The net force is the vector sum of F1 and F2 and can be calculated as follows:
F net = F1 + F2 = 2.38 x 10-2 N + 4.58 x 10-2 N = 7.00 x 10-2 N
Therefore, the net force on a 30.0 nc charge located at the origin by two other charges is 7.00 x 10-2 N.
To know more about Force refer here:
https://brainly.com/question/13191643#
#SPJ11
6. a 21.00-kg child initially at rest slides down a playground slide from a height of 3.40 m above the bottom of the slide. if her speed at the bottom is 2.30 m/s, how much energy is lost due to friction?
If a 21.00-kg child slide from a height of 3.40 m above the bottom of the slide and her speed at the bottom is 2.30 m/s, the amount of energy lost due to friction is 644.18 J.
The potentiаl energy of аn object depends on the locаtion of the object from the bottom reference floor аnd the mаss of the object. The аmount of energy contаins by the object аt аny height is known аs the potentiаl energy of thаt object.
We are given:
The energy of the child at the upper end of the slide is,
[tex]E_{u}[/tex] = mgh
Substitute the values in the above equation
[tex]E_{u}[/tex] = 21 kg × 9.8 m/s2 × 3.40 m
= 699.72 J
The energy at the bottom of the slide is,
[tex]E_{b}[/tex] = [tex]\frac{1}{2}(mv^{2})[/tex]
Substitute the values in the above equation.
[tex]E_{b}[/tex] = [tex]\frac{1}{2}(21.2.30^{2})[/tex]
[tex]E_{b}[/tex] = 55.54 J
The energy lost due to friction is,
[tex]E_{f}[/tex] = [tex]E_{u}[/tex] - [tex]E_{b}[/tex]
Substitute the values in the above equation
[tex]E_{f}[/tex] = 699.72 - 55.54
[tex]E_{f}[/tex] = 644.18 J
Thus, the energy lost due to friction is 644.18 J.
For more information about potentiаl energy refers to the link: https://brainly.com/question/14904642
#SPJ11
which of these objects has the smallest radius? which of these objects has the smallest radius? a 1.2msun white dwarf a 0.6msun white dwarf jupiter
Among the given objects, Jupiter has the smallest radius.
The radius is the distance from the center of a circle or sphere to any point on its perimeter or surface, respectively. We can determine the size of the sphere or circle by calculating its radius.
For the given objects, we can compare their radii to determine which one is the smallest.
The objects are as follows:
a 1.2msun white dwarfa
0.6msun white dwarfw Jupiter
We can compare the radius of these objects as follows:
a 1.2msun white dwarf has a radius of 5,400 kilometers.
a 0.6msun white dwarf has a radius of 3,200 kilometers.
Jupiter has a radius of 69,911 kilometers.
From the above comparison, we can see that Jupiter has the smallest radius.
To know more about Jupiter, refer here:
https://brainly.com/question/10906567#
#SPJ11
explain how different wavelengths of the electromagnetic spectrum are used to gain information about distances and properties of components in the universe
Different wavelengths of the electromagnetic spectrum can be used to gain information about distances and properties of components in the universe through various astronomical observations and measurements.
What is Electromagnetic Spectrum?
The electromagnetic spectrum is a range of all the types of electromagnetic radiation, which includes radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. It encompasses all the wavelengths and frequencies of electromagnetic radiation.
For example, visible light, which is a small portion of the electromagnetic spectrum, is used to observe the visible features of celestial bodies such as stars, planets, and galaxies. By analyzing the brightness, color, and spectrum of visible light emitted or reflected by these objects, astronomers can learn about their temperature, composition, and motion.
Infrared radiation, which has longer wavelengths than visible light, can penetrate through the interstellar dust and gas that block visible light. This allows astronomers to study the hidden regions of the universe, such as the centers of galaxies and the early universe, and detect cold objects like protestors and dust clouds.
Learn more about Electromagnetic Spectrum from given link
https://brainly.com/question/2261239
#SPJ1
what is light? group of answer choices a. light is radiant energy in the form of a stream of energy particles, called photons. b. light is radiant energy in the form of a wave of electromagnetic energy.
Light is radiant energy in the form of a wave of electromagnetic energy.
Light is a form of electromagnetic radiation that is visible to the human eye. It is made up of a stream of energy particles, called photons, that travel in a wave-like pattern. It has various properties, including intensity, color, and direction, which can be used to explain its behavior. It can be described as having both a particle-like nature and a wave-like nature. The particle-like nature of light is exhibited in the way it travels in packets of energy, known as photons. The wave-like nature of light is demonstrated by the way it can be bent, diffracted, and refracted.
The intensity of light is determined by the amount of energy that a photon has. The color of light is determined by the wavelength of the light, with different colors having different wavelengths. Direction is also an important property of light, as it determines how light will be bent when it passes through an obstacle or is reflected off of a surface.
Light plays a critical role in the lives of humans and other organisms. It is used in vision, to help organisms understand the world around them. Light also has numerous applications in science and technology, such as in communications, photography, and solar energy.
In conclusion, light is a form of electromagnetic radiation composed of photons that travel in a wave-like pattern. It has various properties, including intensity, color, and direction, that are used to explain its behavior. Light is important for vision and has various uses in science and technology.
For more such questions on Light.
https://brainly.com/question/13777321#
#SPJ11
how many turns of wire would be required to make a 160- mh inductor out of a 25.0- cm -long air-filled solenoid with a diameter of 6.5 cm ?
The number of turns is 0.305 which means it is not possible to construct a 25.0- cm solenoid of 160mH inductor.
The inductance of a solenoid depends on several factors such as the number of turns of wire, the length of the coil, and the radius of the coil. The equation to calculate the inductance of a solenoid is given as:
L=μοN²A/l
where L is the inductance, μο is the permeability of free space, N is the number of turns, A is the cross-sectional area, and l is the length of the solenoid.
To find the number of turns required to make a 160-mH inductor out of a 25.0-cm-long air-filled solenoid with a diameter of 6.5 cm, we can use the following steps.
First, we need to find the cross-sectional area of the solenoid, A. Since the solenoid is cylindrical, we can use the formula for the area of a circle, A=πr², where r is the radius of the solenoid divided by 2.
A=π(6.5/2)²
A=33.18 cm²
Next, we need to convert the length of the solenoid from centimeters to meters, l.
l=25.0 cm×(1 m/100 cm)l=0.25 m
Now we can substitute the values we found into the equation for inductance and solve for the number of turns, N.
L=μοN²A/l
160×10⁻³ H=(4π×10⁷ H/m×N²×33.18×10⁻⁴m²) / 0.25
0.0959=N²
N=√(0.0959)
N=0.306 turns
As we can see from the calculation above, the number of turns required to make a 160-mH inductor out of a 25.0-cm-long air-filled solenoid with a diameter of 6.5 cm is 0.306 turns. However, this answer does not make sense because it is not possible to have a fractional number of turns.
Therefore, we must conclude that the solenoid is not practical for use as an inductor, and we should use a different type of coil or adjust the parameters of the solenoid to make it practical for use as an inductor.
To know more about the solenoid, refer here:
https://brainly.com/question/15504705#
#SPJ4
10. does the vertical speed of a segment of a horizontal taut string through which a sinusoidal, transverse wave is propagating depend on the wave speed of the transverse wave?
The vertical speed of a segment of a horizontal taut string through which a sinusoidal, transverse wave is propagating depends on both the wave speed and the amplitude of the transverse wave.
The transverse wave and wave speed for vertical speed of a segment also depends on factors like:
The wave speed of a transverse wave on a string is determined by the tension in the string and the mass per unit length of the string, as well as the properties of the medium through which the wave is propagating. This wave speed does not directly determine the vertical speed of a segment of the string.However, the amplitude of the transverse wave does affect the vertical speed of a segment of the string. The greater the amplitude of the wave, the greater the maximum vertical displacement of the string from its rest position, and thus the greater the vertical speed of a segment of the string at that point.The vertical speed (v) of a segment of a horizontal taut string through which a sinusoidal, transverse wave is propagating can be expressed mathematically as: v = Aωcos(ωt)where 'A' is the amplitude of the transverse wave,
'ω' is the angular frequency of the wave,
't' is the time, and
'cos' is the cosine function.
The wave speed [tex](v_w)[/tex]of a transverse wave on a string is given by: [tex]v_w[/tex] = [tex]\sqrt{(T/u)[/tex]where 'T' is the tension in the string and
'u' is the mass per unit length of the string.
So while the wave speed does not directly determine the vertical speed of a segment of the string, it does affect the angular frequency of the wave (which is related to the wave speed) and thus indirectly affects the vertical speed of a segment of the string through the amplitude of the wave.
To learn more about the 'transverse wave':
https://brainly.com/question/2270715
#SPJ11
when capacitors are connected in series, they have the same surface area. voltage. separation. dielectric. charge.
When capacitors are connected in series, they have the same charge.
A capacitor is an electrical component that stores energy in an electrical field. Capacitance, measured in farads, is a measure of the capacitor's ability to store charge, and it is determined by the surface area of the conductive plates, the separation between them, and the dielectric constant of the material between them.
When capacitors are connected in series, the charge on each capacitor is the same, since charge conservation demands that the same amount of charge flows into each capacitor.
A common application of series capacitors is to produce a capacitor with a larger voltage rating than any of the individual capacitors. When a voltage V is applied across a set of N identical capacitors connected in series, the voltage across each capacitor is V/N.
The total energy stored in the capacitors is the sum of the energy stored in each capacitor separately: U₍total₎ = 1/2 C₍eq₎ V²
where: C₍eq₎ is the equivalent capacitance of the N capacitors connected in series.
Since the charge on each capacitor is the same, the equivalent capacitance of capacitors in series is given by: 1/C₍eq₎ = 1/C1 + 1/C2 + ... + 1/CN.
To know more about capacitors, refer here:
https://brainly.com/question/17176550#
#SPJ11
a force f applied to an object of mass m1 produces an acceleration of 7.36 m/s2. the same force applied to a second object of mass m2 produces an acceleration of 2.62 m/s2. what is the value of the ratio m1/m2?
The ratio of m1 and m2 is 2.81.
The ratio of m1 and m2 can be calculated using Newton's second law of motion, which states that the force F applied to an object is equal to its mass multiplied by its acceleration: F = m * a.
For the two objects given in the question, we have F = m1 * 7.36 m/s2 and F = m2 * 2.62 m/s2.
Therefore, the ratio of m1 and m2 can be found by dividing the first equation by the second: m1/m2 = (m1 * 7.36 m/s2) / (m2 * 2.62 m/s2). Solving for m1/m2, we get m1/m2 = 2.81.
The ratio of m1 and m2 is equal to 2.81, which can be calculated using Newton's second law of motion. According to the equation, the force F applied to an object is equal to its mass multiplied by its acceleration.
For the two objects in the question, we found the ratio of m1 and m2 to be 2.81.
to know more about ratio refer here:
https://brainly.com/question/13419413#
#SPJ11