A 63kg sprinter, starting from rest, runs 43m in 7.0 s at constant acceleration. What is the magnitude of the horizontal force acting on the sprinter? What is the sprinter's power output at 2.0s, 4.0s, and 6.0s?

The moment of inertia of a turntable about its rotation axis can be determined using the formula I = (1/2) * M * R² where M is the mass of the turntable and R is its radius. The answer is expressed in kilogram meters squared (kg m²).

To determine the moment of inertia of a turntable about its rotation axis, we first need to understand some key concepts. Moment of inertia (I) is a measure of an object's resistance to rotational motion, and it depends on both the mass of the object and its distribution around the axis of rotation. In simple terms, it tells us how difficult it is to change the rotational speed of an object.

For a turntable, we can assume it is a flat, uniform circular disc with a known mass (M) and radius (R). The moment of inertia for a circular disc rotating about an axis passing through its center and perpendicular to the plane of the disc can be calculated using the formula:

I = (1/2) * M * R²

Here, M is the mass of the turntable in kilograms (kg) and R is the radius of the turntable in meters (m). To express the moment of inertia in kilogram meters squared (kg m²), simply plug in the given values of mass and radius into the formula and solve for I.

As an example, if the mass of the turntable is 5 kg and the radius is 0.5 m, the moment of inertia would be:

I = (1/2) * 5 kg * (0.5 m)² = 0.625 kg m²

Learn more about moment of inertia here:

https://brainly.com/question/15246709

#SPJ11

The Sun passes almost in front of the center of our Milky Way Galaxy once a year.

The Milky Way is a barred spiral galaxy, with a central bar-shaped structure surrounded by a disk of stars, gas, and dust.

The center of the Milky Way contains a supermassive black hole, which is surrounded by a region of intense radiation and high-energy particles.

The Sun's orbit around the center of the Milky Way is tilted at an angle of about 60 degrees relative to the plane of the galactic disk.

As a result, the Sun passes through the galactic plane twice each year, once when it is moving northward and once when it is moving southward.

However, the Sun only passes almost in front of the center of the Milky Way once a year, when it is aligned with the galactic center.

This alignment occurs around December 21st or 22nd of each year, which is coincidentally close to the winter solstice in the Northern Hemisphere.

During this time, the Sun is aligned with the center of the Milky Way, which is approximately 27,000 light-years away from Earth.

While this alignment is an interesting astronomical event, it has no significant effect on Earth or the Sun.

To know more about Milky Way Galaxy visit link :

https://brainly.com/question/2905713

#SPJ11

Answer:We can use the work-energy theorem to solve this problem, which states that the net work done on a particle is equal to its change in kinetic energy. Mathematically:

W_net = ΔK

where W_net is the net work done and ΔK is the change in kinetic energy.

The net work done on the particle is equal to the work done by the force f(x) between the two positions. Mathematically:

W_net = ∫_x1^x2 f(x) dx

where x1 and x2 are the initial and final positions of the particle, respectively.

Substituting the given force, we get:

W_net = ∫_-4^4 (-5x^2 + 7x) dx

Integrating, we get:

W_net = [(5/3)x^3 - (7/2)x^2]_-4^4

W_net = [(5/3)*(4^3) - (7/2)*(4^2)] - [(5/3)*(-4^3) - (7/2)*(-4^2)]

W_net = -416 J

The negative sign indicates that the net work done by the force is negative, which means that the force does negative work and reduces the particle's kinetic energy.

We can now use the work-energy theorem to find the change in kinetic energy between the two positions. Mathematically:

ΔK = W_net

ΔK = -416 J

The change in kinetic energy is equal to the final kinetic energy minus the initial kinetic energy. Mathematically:

ΔK = K_f - K_i

where K_f and K_i are the final and initial kinetic energies, respectively.

Substituting the given initial speed and mass, we can find the initial kinetic energy:

K_i = (1/2) * m * v_i^2

K_i = (1/2) * 2.0 kg * (20.0 m/s)^2

K

Explanation:

The speed of the particle at x = 4.0 m is approximately 13.04 m/s (rounded to two decimal places). The total energy of a particle includes its kinetic energy and potential energy.

To solve this problem, we need to use the conservation of energy principle, which states that the total energy of a system remains constant, i.e., energy is conserved.  Therefore, we can write:

Initial energy (at x = -4.0 m) = Final energy (at x = 4.0 m)

The kinetic energy of the particle is given by:

[tex]K = (1/2)mv^2[/tex]

where

m is the mass of the particle and

v is its speed.

The potential energy of the particle is given by:

U(x) = ∫F(x)dx

where

F(x) is the force acting on the particle and

dx is an infinitesimal displacement.

Integrating the given force with respect to x, we get:

[tex]U(x) = (-5/3)x^3 + (7/2)x^2[/tex]

Therefore, the initial energy of the particle is:

Ei = K + U(-4.0)

   [tex]= (1/2)(2.0 kg)(20.0 m/s)^2 + [(-5/3)(-4.0)^3 + (7/2)(-4.0)^2][/tex]

    = 425.33 J

Similarly, the final energy of the particle is:

Ef = K + U(4.0)

 [tex]= (1/2)(2.0 kg)v^2 + [(-5/3)(4.0)^3 + (7/2)(4.0)^2][/tex]

[tex]= (1/2)(2.0 kg)v^2 + 85.33 J[/tex]

Since the total energy is conserved, we can equate Ei and Ef, and solve for v:

[tex]425.33 J = (1/2)(2.0 kg)v^2 + 85.33 J[/tex]

[tex]340 J = (1/2)(2.0 kg)v^2[/tex]

[tex]v^2 = 340 J / (2.0 kg)[/tex]

[tex]v = \sqrt{(170) m/s[/tex]

Therefore, the speed of the particle at x = 4.0 m is approximately 13.04 m/s (rounded to two decimal places).

To know more about kinetic energy refer here

brainly.com/question/999862#

#SPJ11

The researchers should expect to wait approximately 4.36 seconds for the first echoes to arrive.

To calculate the time it takes for the echoes to arrive, we need to use the formula:

Time = Distance / Speed

The distance in this case is the twice the depth of the ocean, since the sound waves need to travel from the research vessel to the ocean floor and then back to the vessel. Therefore, the distance is:

2 x 340 m = 680 m

The speed of sound in seawater is given as 1560 m/s. Plugging in these values into the formula, we get:

Time = 680 m / 1560 m/s = 0.436 seconds

Therefore, the researchers should expect to wait approximately 4.36 seconds for the first echoes to arrive.

learn more about ultrasound waves

https://brainly.com/question/22844181

#SPJ11

(a) Resistance for each devices are: 3546.67 Ω, 3533.33 Ω and 2224.17 Ω.

(b) The equivalent resistance of the parallel combination of the three devices is approximately 3556.91 Ω.

(c) The current through each of the devices are: 65 mA, 65 mA and 103 mA.

To calculate the resistance for each of the devices, we can use Ohm's Law, which states that resistance (R) is equal to the voltage (V) divided by the power (P):

(a) Resistance for each device:

Device 1 (15 W): R₁ = V² / P = (230 V)² / 15 W ≈ 3546.67 Ω

Device 2 (150 W): R₂ = V² / P = (230 V)² / 150 W ≈ 3533.33 Ω

Device 3 (240 W): R₃ = V² / P = (230 V)² / 240 W ≈ 2224.17 Ω

(b) To find the equivalent resistance (Req) of devices connected in parallel, we can use the formula:

1/Req = 1/R₁ + 1/R₂ + 1/R₃

Substituting the values, we have:

1/Req = 1/3546.67 Ω + 1/3533.33 Ω + 1/2224.17 Ω

Calculating this expression, we find:

1/Req ≈ 0.000281 Ω⁻¹

Taking the reciprocal of both sides, we get:

Req ≈ 3556.91 Ω

Therefore, the equivalent resistance of the parallel combination of the three devices is approximately 3556.91 Ω.

(c) To calculate the current through each device, we can use Ohm's Law again:

Current (I) = Voltage (V) / Resistance (R)

For each device:

Device 1 (15 W): I₁ = 230 V / 3546.67 Ω ≈ 0.065 A (or 65 mA)

Device 2 (150 W): I₂ = 230 V / 3533.33 Ω ≈ 0.065 A (or 65 mA)

Device 3 (240 W): I₃ = 230 V / 2224.17 Ω ≈ 0.103 A (or 103 mA)

Therefore, the current through each of the devices is approximately:

Device 1: 0.065 A (or 65 mA)

Device 2: 0.065 A (or 65 mA)

Device 3: 0.103 A (or 103 mA)

To know more about Resistance , refer here:

brainly.com/question/21441738#

#SPJ11

112.5 joules is transferred into a system when its internal energy decreases by 145 j while it was performing 32.5 j of work.

The first law of thermodynamics states that the change in internal energy of a system is equal to the heat transferred into the system minus the work done by the system. In this case, the internal energy decreased by 145 J, and the work done was 32.5 J.

Therefore, the heat transferred into the system can be calculated as:

Heat transferred = Change in internal energy + Work done

Heat transferred = (-145 J) + (32.5 J)

Heat transferred = -112.5 J

The heat transferred is negative, indicating that the system lost heat. Therefore, 112.5 joules of heat were transferred out of the system.

Learn more about internal energy at

https://brainly.com/question/14668303

#SPJ4

The substance with the higher entropy per mole at a given temperature is 02(g) at 5 atm.

That higher pressure generally leads to a lower entropy due to the more ordered arrangement of particles. In this case, the lower pressure of 0.5 atm results in a less ordered arrangement of O2 molecules, leading to a higher entropy. Therefore, the 02(g) at 5 atm has a lower entropy per mole compared to 02(g) at 0.5 atm.

Entropy is a measure of the randomness or disorder of a system. When comparing two substances at the same temperature, the one with the lower pressure will have higher entropy. This is because lower pressure allows the gas molecules to have more space to move around, resulting in more randomness and disorder.

Learn more about Entropy

https://brainly.com/question/6364271

#SPJ11

The main answer to your question is that the energy loss in a transformer due to heat produced as magnetic domains rearrange is called "hysteresis loss."

To provide a brief explanation, hysteresis loss occurs when the magnetic domains within the transformer's core material align and realign themselves in response to the changing magnetic field.

This process generates heat, which results in energy being lost in the form of thermal energy.

In summary, the energy loss in a transformer caused by heat production as magnetic domains rearrange is known as hysteresis loss.

Learn more about "hysteresis loss." click here:

https://brainly.com/question/29503381

#SPJ11

It takes about 1.28 ms for the capacitor's charge to reduce to 30.0 μC.

The voltage across a capacitor discharged through a resistor can be described by the equation:

V(t) = [tex]V_{0} * e^{(-t/RC)}[/tex]

where V(t) is the voltage at time t, [tex]V_{0}[/tex]is the initial voltage (in this case, [tex]V_{0}[/tex] = Q/C, where Q is the initial charge ,C is the capacitance, R is the resistance and t is time.

In this problem, we are given[tex]V_{0}[/tex](30.0 μC/30.0 μF = 1.0 V), R (1.70 kΩ), and C (30.0 μF), and we are asked to find the time it takes for the charge to reduce to 30.0 μC.

To do this, we can rearrange the equation above to solve for t:

t = -RC * ln(V/[tex]V_{0}[/tex])

where ln is the natural logarithm.

Plugging in the given values, we get:

t = -(1.70 kΩ * 30.0 μF) * ln(30.0 μC/(30.0 μF * 1.0 V))

t ≈ 1.28 ms

Therefore, it takes about 1.28 ms for the capacitor's charge to reduce to 30.0 μC.

To know more about capacitor's charge refer here:

https://brainly.com/question/29100869

#SPJ11

Therefore, to focus on an object 0.540 m in front of the lens, the lens-to-film distance should be 37.6 mm. This means that we need to move the lens closer to the film by 2.4 mm (40.0 mm - 37.6 mm) in order to bring the image of the closer object into sharp focus.

When a camera lens is focused on a distant object, the distance between the lens and the film (or digital sensor) is equal to the focal length of the lens. This is because the lens is designed to bring parallel rays of light to a focus at a specific distance from the lens, which is called the focal length.

In this case, we are given that the lens-to-film distance for the distant object is 40.0 mm. This means that the focal length of the lens is also 40.0 mm, assuming that the lens is a thin lens with negligible thickness.

To focus on an object 0.540 m in front of the lens, we need to adjust the lens-to-film distance to bring the image of the object into sharp focus on the film. The formula that relates the lens-to-film distance, the object distance, and the focal length of the lens is:

1/f = 1/d_o + 1/d_i

where f is the focal length, d_o is the object distance, and d_i is the image distance (which is equal to the lens-to-film distance for a thin lens).

We can rearrange this equation to solve for d_i:

1/d_i = 1/f - 1/d_o

d_i = 1 / (1/f - 1/d_o)

Plugging in the values we know, we get:

d_i = 1 / (1/40.0 mm - 1/0.540 m)

d_i = 37.6 mm

To know more about single-lens camera,

https://brainly.com/question/14097025

#SPJ11

The width of the central maximum in the figure is directly related to the wavelength and diameter of the circular aperture. If the wavelength is increased, the width of the central maximum will also increase.

This is because the diffraction pattern is directly related to the size of the aperture in relation to the wavelength. If the wavelength increases, the diffracted waves will spread out more, resulting in a wider central maximum.

Similarly, if the diameter of the aperture is increased, the width of the central maximum will decrease. This is because a larger aperture will result in less diffraction and a sharper central maximum.

If the aperture diameter is less than the light wavelength, the screen will appear uniform in brightness with no discernible diffraction pattern. This is because the size of the aperture is too small to cause significant diffraction of the light waves. In this case, the light will simply pass through the aperture and continue on in a straight line.

Learn more about wavelength here:

brainly.com/question/12924624

#SPJ11

(iv) Both (ii) and (iii) are true. The frequency of the wave must be the same as the frequency of a small piece of the cord because the wave is made up of the vibrations of the individual particles of the cord.

The amplitude of the wave must also be the same as the amplitude of a small piece of the cord because the amplitude is the maximum displacement of the particle from its rest position, and this is the same for both the wave and the individual particle.

However, the speed of the wave is not necessarily the same as the speed of a small piece of the cord because the wave is a result of the interaction between the particles and may have a different speed depending on the properties of the medium.
Let's consider each statement one by one:

(i) The speed of the wave must be the same as the speed of a small piece of the cord.
- This statement is false. The speed of the wave refers to the speed at which the wave itself travels down the cord. The speed of a small piece of the cord refers to the transverse motion of that piece as it oscillates up and down. These two speeds are not the same.

(ii) The frequency of the wave must be the same as the frequency of a small piece of the cord.
- This statement is true. The frequency of the wave refers to the number of oscillations per unit time. Since the small piece of the cord is part of the wave, it oscillates with the same frequency as the wave itself.

(iii) The amplitude of the wave must be the same as the amplitude of a small piece of the cord.
- This statement is true. The amplitude of the wave is the maximum displacement of any point on the cord from its equilibrium position. Since the small piece of the cord is part of the wave, its maximum displacement (amplitude) will be the same as the amplitude of the wave.

(iv) Both (ii) and (iii) are true.
- This statement is true because, as explained earlier, both (ii) and (iii) are true statements.

So, the correct answer is: Both (ii) and (iii) are true. The frequency and amplitude of the wave must be the same as the frequency and amplitude of a small piece of the cord, respectively.

Learn more about amplitude here:-  brainly.com/question/8662436

#SPJ11

The 4.0 kg cat must stand 1.9 meters to the left of the pivot to balance the seesaw. To keep the seesaw balanced, the torques on both sides of the pivot must be equal.

Torque is defined as force multiplied by distance from the pivot.  The weight of the 5.1 kg cat and 2.5 kg bowl of tuna fish will exert a torque on the right side of the pivot, while the weight of the 4.0 kg cat on the left side will exert a torque on the left side of the pivot.

Let x be the distance the 4.0 kg cat stands from the pivot. Then, the torque on the right side is (5.1+2.5)kg * 4.0m = 30.4 Nm. To balance this, the torque on the left side must also be 30.4 Nm.

Therefore,

(4.0kg * x)m = 30.4Nm, and

x = 7.6m/4.0kg = 1.9m.

To know more about Torque visit:

https://brainly.com/question/31248352

#SPJ11

A battery and fan are included in this electrical circuit, with the chemical energy from the battery being turned into electric energy. This electricity propels the fan, changing it to kinetic energy which causes motion.

As a result, this energy ultimately creates air that is moving.

From the information, a team of students builds an electrical circuit with a battery and a fan. In 1-2 sentences, describe how energy is changed from one form to another in their electric circuit.

In this case, a battery and fan are included in this electrical circuit, with the chemical energy from the battery being turned into electric energy. This electricity propels the fan, changing it to kinetic energy which causes motion. As a result, this energy ultimately creates air that is moving.

Learn more about circuit on

https://brainly.com/question/2969220

#SPJ1

If two coils placed next to one another have a mutual inductance of 5.50 mH, what voltage (in V) is induced in one when the 4.00 A current in the other is switched off in 40.0 ms?
The voltage induced in one coil is 550 V.

The mutual inductance (M) is given as 5.50 mH (or 0.0055 H). The change in current (∆I) is 4.00 A, and the time taken to switch off the current (∆t) is 40.0 ms (or 0.040 s). To find the induced voltage, we can use the formula:
V = M * (∆I/∆t)
Plugging in the given values:
V = 0.0055 H * (4.00 A / 0.040 s)
V = 550 V

Summary: When a 4.00 A current in one of the two coils with a mutual inductance of 5.50 mH is switched off in 40.0 ms, a voltage of 550 V is induced in the other coil.

Learn more about voltage click here:

https://brainly.com/question/1176850

#SPJ11

The maximum diameter the nozzle can have if the nozzle diameter is twice as great will be h = [tex]Av^2/2[/tex]mg

The maximum height the water can reach will be d = [tex]\sqrt{(4Av^2/(pi \times \sqrt(2gh) \times (2mg)))[/tex]

Assuming negligible air resistance and friction losses, the maximum height, h, that the water can reach can be calculated using the conservation of energy. The potential energy gained by the water is equal to the work done by the water pressure, which is given by:

mgh =[tex]Av^2/2[/tex]

where m is the mass of water that enters the hose per unit time, g is the acceleration due to gravity, and A is the cross-sectional area of the hose. Solving for h, we get:

h = [tex]Av^2/2[/tex]mg

To reach the top of the building, h, the maximum diameter of the nozzle, d, can be calculated by equating the maximum velocity of the water leaving the nozzle with the minimum velocity required at the top of the building, given by:

v = [tex]\sqrt(2gh)[/tex]

Thus, the maximum diameter of the nozzle can be calculated as:

d = [tex]\sqrt{(4Av^2/(\pi \times sqrt(2gh) \times (2mg)))[/tex]

If the nozzle diameter is doubled, the maximum height that the water can reach would also be doubled, as the velocity of the water leaving the nozzle remains the same.

For more such answers on potential energy

https://brainly.com/question/14427111

#SPJ11

The RMS value of the magnetic field (B) will also be doubled when the RMS value of the electric field (E) is doubled. The factor by which the magnetic field changes is 2.

To provide a detailed explanation, when the RMS value of the electric field in an electromagnetic wave is doubled, the RMS value of the magnetic field also changes. The relationship between the electric and magnetic fields in an electromagnetic wave is governed by Maxwell's equations. These equations state that the electric and magnetic fields are perpendicular to each other and vary in intensity in a synchronized way.

In an electromagnetic wave, the intensity of the electric field and the magnetic field are related by a constant known as the impedance of free space. This constant determines the strength of the magnetic field for a given strength of the electric field. Therefore, if the RMS value of the electric field is doubled, the RMS value of the magnetic field will also double. This means that the strength of both fields increases proportionally.

To solve this mathematically, we first need to understand the relationship between the electric field (E) and the magnetic field (B) in an electromagnetic wave. This relationship is given by the formula:

E = c * B

where E is the RMS value of the electric field, B is the RMS value of the magnetic field, and c is the speed of light in a vacuum.

Now, if the RMS value of the electric field (E) is doubled, we have:
2E = c * B'

where B' is the new RMS value of the magnetic field. We can now express B' in terms of the original magnetic field B:
2E = c * B'
2(c * B) = c * B'
2B = B'

Hence, the RMS value of the magnetic field (B) will also be doubled when the RMS value of the electric field (E) is doubled. The factor by which the magnetic field changes is 2.

Learn more about electromagnetic waves here:

https://brainly.com/question/3101711

#SPJ11

Answer:

-40 c and -40 F

Explanation:

They are both the same as eachother on the scale of fahrenheit and Celsius the simple method to find when two temperatures scales are equal to each other is to set the conversion factors for the two scales equal to each other and solve for temperature

A. In the case where Anya's endowment is ea = (6,6), the marginal rate of substitution (MRS) of rocks for sand piles for Anya (MRSA) is 1/2. The marginal rate of substitution (MRS) of rocks for sand piles for Bryce (MRSB) is 1.

B. In the case where Anya's endowment is ea = (6,3), the marginal rate of substitution (MRS) of rocks for sand piles for Anya (MRSA) is 1/2. The marginal rate of substitution (MRS) of rocks for sand piles for Bryce (MRSB) is 2/3.

A. The marginal rate of substitution (MRS) represents the rate at which a person is willing to exchange one good for another while keeping their utility constant. It is the slope of the indifference curve.

For Anya, her utility function is given as 1/2 uA(TA, SA). Since the utility function is homogeneous of degree 1/2, the MRS of rocks for sand piles (MRSA) for Anya is equal to the ratio of the marginal utility of rocks (MUₐ) to the marginal utility of sand piles (MUₛ):

MRSA = MUₐ / MUₛ

Given that the utility function is 1/2 uA(TA, SA), the marginal utility of rocks (MUₐ) is 1/2 and the marginal utility of sand piles (MUₛ) is 1.

Therefore, MRSA = (1/2) / 1 = 1/2.

For Bryce, his utility function is ub(TB, SB) = 1/2 (TB + SB). Since the utility function is linear, the MRS of rocks for sand piles (MRSB) for Bryce is constant and equal to the ratio of the coefficients of the goods in the utility function:

MRSB = coefficient of rocks (TB) / coefficient of sand piles (SB)

Given that the utility function is 1/2 (TB + SB), the coefficient of rocks (TB) is 1 and the coefficient of sand piles (SB) is 1.

Therefore, MRSB = 1 / 1 = 1.

B. Following the same reasoning as in part A, the MRS of rocks for sand piles (MRSA) for Anya remains 1/2, as it depends on the utility function and not the endowment.

For Bryce, with Anya's endowment of ea = (6,3), Bryce's endowment is es = (4,7) (remaining rocks and sand piles in the market). The utility function for Bryce remains ub(TB, SB) = 1/2 (TB + SB).

The coefficient of rocks (TB) in the utility function is 1 and the coefficient of sand piles (SB) is 2.

Therefore, MRSB = 1 / 2 = 2/3.

By calculating the MRS for each individual, we can understand their preferences and willingness to trade one good for another while maintaining their utility level.

To know more about marginal rate of substitution (MRS) refer here:

https://brainly.com/question/30692880#

#SPJ11

The magnitude of the force is 4.69 x 10^-14 N and The magnitude of the acceleration is 5.14 x 10^16 m/s^2

(a) The magnetic force on an electron can be calculated using the equation:

F = qvB sinθ,

F = (-1.6 x 10^-19 C) x (465 m/s) x (5 T) x sin(12.3°)

F ≈ -4.69 x 10^-14 N

The magnitude of the force is simply the absolute value of this result:

|F| ≈ 4.69 x 10^-14 N

(b) The acceleration of the electron can be calculated with the equation:

F = ma,

a = (-4.69 x 10^-14 N) / (9.11 x 10^-31 kg)

a ≈ -5.14 x 10^16 m/s^2

Therefore , the magnitude of the acceleration and force  is simply the absolute value of this result:

|F| ≈ 4.69 x 10^-14 N

|a| ≈ 5.14 x 10^16 m/s^2

To know more about acceleration and force refer here:

https://brainly.com/question/25116504

#SPJ11

Answer:

1:- The upthrust on the solid:- 0.013N

2:- Volume of the solid:- 1.3 Kg/density

3) Density:- 46.15 Kg/m^3

Explanation:

1) The upthrust on the solid is equal to the weight of the water displaced by the solid, which is given by Archimedes' principle. Therefore, we can calculate the upthrust using the formula:

Upthrust = Weight of water displaced = Volume of water displaced x Density of water x Gravity

Since the solid is completely submerged in water, the volume of water displaced is equal to the volume of the solid.

Thus:

Upthrust = Volume of solid x Density of water x Gravity

Upthrust = (1.3 kg / 1000 kg/m^3) x 10 m/s^2

Upthrust = 0.013 N

2) We can use the formula for density to calculate the volume of the solid, which is given by:

Density = Mass / Volume

Rearranging the formula:

Volume = Mass / Density

Volume = 1.3 kg / Density

We know from part (i)

that the upthrust on the solid is equal to the weight of the water displaced, which means that the solid is in equilibrium (i.e., the forces acting on it are balanced).

Therefore:

Weight of the solid = Tension in the string

Weight of the solid = Mass x Gravity

Mass = Weight of the solid / Gravity

Mass = 6.0 N / 10 m/s^2

Mass = 0.6 kg

Substituting the values for mass and density, we get:

Volume = 0.6 kg / Density

0.013 m^3 = 0.6 kg / Density

Density = 0.6 kg / 0.013 m^3

Density = 46.15 kg/m^3.

According to the First Law of Thermodynamics, heat is a kind of energy,

According to the First Law of Thermodynamics, heat is a kind of energy, and as a result, thermodynamic processes are governed by the idea of energy conservation. Heat energy cannot be generated or destroyed, hence this means. However, it may be moved from one place to another and changed into and out of other energy types.

Because it explains that energy is always preserved within a closed system and cannot be generated or destroyed, the first law is known as conservation. In light of this, this occurs when a system's temperature no longer changes. mostly due to the absence of energy flow to and from another system. Without this energy transfer, the system becomes more energy efficient and the temperature is no longer variable.

Read more about Thermodynamics on:

https://brainly.com/question/26035962

#SPJ4

Akeem is walking on the beach on a hot summer day and the sand is very hot. This is because sand has a low specific heat capacity, which means that it does not retain heat well and can easily get hot when exposed to the sun. As Akeem walks on the sand, his feet absorb this heat and start to feel uncomfortable and even painful.

In order to cool down his feet, Akeem runs towards the water and puts his feet in it. This is because water has a high specific heat capacity, which means that it can retain a lot of heat without getting hot quickly. As a result, the water is much cooler than the sand.

When Akeem puts his feet in the water, the heat from his feet is transferred to the water, which has a lot of capacity to absorb it. This causes the water to warm up slightly, but not enough to make it uncomfortable for Akeem. At the same time, the water cools down Akeem's feet, making him feel much more comfortable.

In summary, Akeem runs towards the water and puts his feet in it because the water has a higher specific heat capacity than the sand, which means that it can absorb the heat from his feet without getting hot quickly. This cools down his feet and makes him feel much more comfortable on the hot summer day.

To know more about specific heat of capacity, refer

https://brainly.com/question/27991746

#SPJ11

The  pressure exerted by a 7000-kg elephant on the ground depends on the total area of its feet in contact with the ground.

We first need to calculate the area of one foot.

Given that the circular cross-section of each foot has a diameter of 50 cm, we can find the radius by dividing the diameter by 2, which is 25 cm (or 0.25 m).

The area of a circle is calculated using the formula A = πr². So, the area of one foot is A = π(0.25)² ≈ 0.196 m².
Assuming the elephant has 4 feet, the total area in contact with the ground would be 4 × 0.196 m² ≈ 0.784 m².

To find the pressure exerted, we use the formula P = F/A, where P is pressure, F is force (which is the elephant's weight), and A is the area. The weight of the elephant can be calculated as mass × gravitational acceleration (F = m × g), where m = 7000 kg and g = 9.81 m/s². Therefore, F = 7000 × 9.81 ≈ 68670 N.
Now we can calculate the pressure exerted: P = 68670 N / 0.784 m² ≈ 87589.54 Pa (Pascals).

Hence , a 7000-kg elephant with a circular cross-section of each foot having a diameter of 50 cm exerts a pressure of approximately 87589.54 Pa on the ground.

learn more about force click here:

https://brainly.com/question/12785175

#SPJ11

The true statements are: the average kinetic energy decreases with decreasing temperature, some gas molecules move slower than average, and temperature relates to average kinetic energy.


1. The average kinetic energy of gas molecules decreases with decreasing temperature. As temperature decreases, gas molecules move slower, resulting in lower kinetic energy.

2. There are gas molecules that move slower than the average. In any gas sample, there's a distribution of molecular speeds, with some molecules moving slower and others faster than the average.

3. The temperature of a gas sample is related to the average kinetic energy. Higher temperature corresponds to higher average kinetic energy, as gas molecules move faster with increased thermal energy.

The average speed of gas molecules depends on temperature and increases with it.

For more such questions on kinetic energy, click on:

https://brainly.com/question/8101588

#SPJ11

The bola consists of three stones, each with mass m, attached to the ends of three light cords, each with length l, that are tied together to form a Y shape.

When the hunter releases one of the stones while swinging the other two stones above their head, the cords quickly take a stable arrangement with a constant angle of 120 degrees between them. The bola then undergoes horizontal circular motion with a radius of 2l and speed v₀, while ignoring the vertical motion due to gravitational forces.

The bola is a hunting tool used by native people in North and South America, consisting of three stones with mass m, attached to the ends of three light cords with length l, which are tied together to form a Y shape. When the hunter releases one of the stones while swinging the other two stones above their head, the cords quickly take a stable arrangement with a constant angle of 120 degrees between them.

In the horizontal direction, the bola undergoes circular motion with a radius of 2l and a speed of v₀. This means that the stones move in a horizontal circle with the hunter holding one stone as the center of rotation. The horizontal component of the velocity of the stones is directed toward the quarry at a particular moment when the hunter releases the stone in their hand.

The vertical motion of the bola is ignored in this scenario, as the gravitational forces exerted by the Earth do not significantly affect the horizontal motion. The junction of the cords, where the stones are tied together, moves with downward acceleration due to gravity. However, the horizontal motion of the stones remains unchanged during this process.

Understanding the physics of the bola's motion, including the circular motion in the horizontal plane and the free fall in the vertical plane, is essential for accurately describing its behavior during hunting or other uses. Properly accounting for the effects of gravity, mass, cord length, and initial velocity is crucial in analyzing the bola's trajectory and predicting its behavior during use.

To know more about vertical motion refer here:

https://brainly.com/question/11049671#

#SPJ11

Answer:

c.negative

Explanation:

Answer: chlorophyll - green pigment

stomata - pores in leaf

guard cell - regulates opening

carbon dioxide - source of carbon for plant

starch - chain of glucose units

hybrid - cross between two varieties

fertilizer - nutrients added to soil

Mendel - pea plants

cacti - no leaves

Explanation:

According to Coulomb's Law, the energy of the interaction between two charged particles is big when the magnitudes of the charges are large and the distance between them is small. This is because the force of interaction is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.

According to Coulomb's Law, the energy of the interaction between two charged particles is directly proportional to the product of their charges and inversely proportional to the distance between them squared. Therefore, the energy of the interaction will be big when the charges of the particles are large and/or the distance between them is small. Conversely, the energy of the interaction will be small when the charges of the particles are small and/or the distance between them is large.

To know more about Coulomb's Law click here:

https://brainly.com/question/506926

#SPJ11

The potential energy of this two particle system relative to the potential energy at infinite separation will be (A) 3.25 x 10⁻⁴ J is the correct option.

The potential energy of a system of two point charges can be calculated using the formula:

U = (k × q₁ × q₂) / r

where U is the potential energy, k is Coulomb's constant (9 x 10⁹ N m²/C²), q₁ and q₂ are the charges of the particles, and r is the distance between the particles.

In this case, q₁ = 5.5 x 10⁻⁸ C, q₂ = -2.3 x 10⁻⁸ C, and r = 3.5 cm = 0.035 m. Substituting these values into the formula, we get:

U = (9 x 10⁹N m²/C²)  (5.5 x 10⁻⁸ C) * (-2.3 x 10⁻⁸C) / 0.035 m

U = -3.25 x 10⁻⁴ J

The negative sign indicates that the potential energy is negative, which means that the two particles are attracted to each other.

To calculate the potential energy relative to the potential energy at infinite separation, we need to subtract the potential energy at infinite separation from the actual potential energy. At infinite separation, the potential energy is zero, so:

Urelative = U₀

Urelative = -3.25 x 10⁻⁴ J

Therefore, the potential energy of this two particle system relative to the potential energy at infinite separation is -3.25 x 10⁻⁴ J.

Thus, the correct option (A).

The complete question is ,

A particle with a charge of 5.5 times 10-8 C is 3.5 cm from a particle with a charge of -2.3 times 10-8 C. The potential energy of this two-particle system, relative to the potential energy at infinite separation, is: 3.2 times 10-4 J -3.2 times 10-4 J 9.3 times 10-3 J -9.3 times 10-3 J zero B

To know more about potential energy

https://brainly.com/question/21106740

#SPJ4