The final angular velocity of the disk-clay system after the collision is approximately 1.67 rpm.
To find the angular velocity in rpm after the collision, we can use the principle of conservation of angular momentum.
Since the disk is initially at rest, the initial angular momentum is zero. After the clay sticks to the edge of the disk, the system will be a combination of the clay and the disk, which will rotate together with some final angular velocity.
The angular momentum of the system is given by the formula:
L = Iω
where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.
Since the system is rotating about an axis perpendicular to the disk, the moment of inertia of the system can be calculated as:
[tex]I = I_{disk} + I_{clay}[/tex]
where I_disk is the moment of inertia of the disk and I_clay is the moment of inertia of the clay. The moment of inertia of a solid disk rotating about an axis through its center is given by:
[tex]I_{disk} = (\frac{1}{2} )MR^2[/tex]
where M is the mass of the disk and R is the radius of the disk. Substituting the given values, we get:
[tex]I_{disk }= (\frac{1}{2} )(2.0 kg)(0.15 m)^2 = 0.0225 kg m^2[/tex]
The moment of inertia of the clay can be approximated as that of a solid sphere rotating about an axis through its center, given by:
[tex]I_{clay} = (\frac{2}{5} )MR^2[/tex]
where M is the mass of the clay and R is its radius. Substituting the given values, we get:
[tex]I_{clay} = (\frac{2}{5} )(0.050 kg)(0.05 m)^2 = 0.000125 kg m^2[/tex]
Therefore, the total moment of inertia of the system is:
[tex]I = I_{disk} + I_{clay} = 0.0225 kgm^2 + 0.000125 kgm^2 = 0.022625 kgm^2[/tex]
The final angular momentum of the system is:
L = Iω
where ω is the final angular velocity of the system. Before the collision, the clay is moving tangent to the disk, so its velocity is perpendicular to the line joining its center and the centre of the disk.
Therefore, the angular momentum of the clay is zero. After the collision, the clay sticks to the edge of the disk, which acquires the angular momentum of the clay. Therefore, the angular momentum of the system after the collision is:
[tex]L = I\omega = (0.000125 kgm^2)(10 m/s) = 0.00125 kgm^2/s[/tex]
Setting the initial and final angular momenta equal, we can solve for the final angular velocity:
L_initial = L_final
[tex]0 = (0.022625 kg m^2) \times 0 + (0.000125 kgm^2 + 0.0225 kgm^2) \times \omega[/tex]
Solving for ω, we get:
ω = 0.00556 rad/s
Finally, we can convert the angular velocity to rpm:
[tex]\omega_{rpm} = \frac{\omega \times 60}{2\pi} = \frac{0.00556 rad/s \times 60}{2\pi} \approx 1.67 rpm[/tex]
The angular velocity in rpm, after the collision is 1.67 rpm.
For more details about collision click here:
https://brainly.com/question/13138178#
#SPJ11
the motion of a piston in an auto engine is simple harmonic. the piston travels back and forth over a distance of 26 cm, and the piston has a mass of 2.2 kg. 8518 rpm 26 cm what is the maximum speed of the piston when the engine is running at 8518 rpm? answer in units of m/s.
please check the attachment to answer and please explain why is the answer D
The pressure of the gas within the container is the same as the pressure inside a 1040 cm long column of water.
What would the manometer look like when a gas's pressure was equal to the atmospheric pressure?The liquid column on each side will be at the same height when the pressures are equal. On a scale, this is typically denoted as zero. The fluid level on one side of the manometer will be equal to the level on the other side when both sides are exposed to the atmosphere because P1 equals P2.
We can utilise the equation P = gh since the pressure of the gas equals the pressure of the water column.
As a result, the gas's pressure is:
P = 75 cm Hg * 1333.22 Pa/cm Hg = 99,991.5 Pa
a) 10 cm: The pressure of the water column is:
P = ρgh = (1000 kg/m³) * (9.81 m/s²) * (0.1 m) = 981 Pa
b) 20 cm: The pressure of the water column is:
P = ρgh = (1000 kg/m³) * (9.81 m/s²) * (0.2 m) = 1962 Pa
c) 1030 cm: The pressure of the water column is:
P = ρgh = (1000 kg/m³ * (9.81 m/s²) * (10.3 m) = 100,205 Pa
d) 1040 cm: The pressure of the water column is:
P = ρgh = (1000 kg/m³) * (9.81 m/s²) * (10.4 m) = 101,971 Pa
To know more about pressure visit:-
https://brainly.com/question/30482677
#SPJ1
Which of the following vehicles are accelerating? Select all that apply.
A: an SUV that is cruising north at a steady speed
B: a minivan that is parked in a driveway during a snowstorm
C: a race car that is rounding a sharp turn at a constant speed
The only vehicle that is accelerating is: C: a race car that is rounding a sharp turn at a constant speed.
Acceleration refers to a change in velocity, which can mean a change in speed or direction. In the case of option C, the race car is constantly changing its direction, so it is experiencing acceleration even though its speed remains constant.
Option A is cruising at a steady speed, so it is not accelerating.
Option B is parked and not moving, so it is not accelerating.
What is velocity?
Velocity is a physical quantity that describes the rate and direction of the motion of an object. It is a vector quantity, which means it has both magnitude and direction.
The magnitude of velocity is the speed of an object in a given direction. For example, if a car is traveling at a speed of 50 miles per hour (mph) in the north direction, its velocity is 50 mph north.
The direction of velocity is the direction in which the object is moving. It is usually specified as an angle relative to a reference axis or direction. In the example above, the direction of the car's velocity is north.
To know more about velocity, viist:
https://brainly.com/question/17127206
#SPJ1
a stone is thrown vertically upwards with an initial velocity of 20m/s. find the maximum height it reaxhes and the time taken by it to reach the height.
How long will it take light to travel from Earth to the moon if it is 386,400 km?
Answer:
The speed of light is approximately 299,792 kilometers per second. If the distance from Earth to the Moon is 386,400 kilometers, then it would take light about 1.28 seconds to travel from Earth to the Moon.
As a result, light would need to travel from Earth to the moon for around 1.29 seconds.
How much time does light take to get from Earth to the Moon?On average, our planet and its sizable natural satellite are separated by roughly 238,855 miles (384,400 kilometres). As a result, the total amount of moonlight we observe is 1.255 seconds old, and it takes around 2.51 seconds for light to travel from the Earth to the moon.
we can use the following formula:
time = distance / speed
First, we need to convert the distance from kilometers to meters:
386,400 km = 386,400,000 meters
Now, we can calculate the time it will take light to travel from Earth to the Moon:
time = 386,400,000 meters / 299,792,458 meters per second
time
≈ 1.29 seconds
To know more about satellite visit:-
https://brainly.com/question/9266911
#SPJ1
if the frequency of the block is 0.44 hz , what is the earliest time after the block is released that its kinetic energy is exactly one-half of its potential energy?
If the frequency of the block is 0.44 hz , the earliest time after the block is released that its kinetic energy is exactly one-half of its potential energy is: (1/0.44)√2P/m
At the time the block is released, its potential energy is at a maximum and its kinetic energy is zero. The block then moves down, and its potential energy decreases while its kinetic energy increases.
At any given time, the total energy of the block is equal to the sum of its potential energy and its kinetic energy. So, when the kinetic energy is exactly one-half of the potential energy, the total energy of the block is equal to three halves of the initial potential energy.
To calculate the earliest time at which the kinetic energy is one-half of the potential energy, we must use the equation P = ½mv^2. Rearranging, we get: v = √2P/m. We also know that the frequency of the block is 0.44 Hz, which is equal to one divided by the period, T. Thus, the velocity of the block can be calculated by multiplying both sides of the equation with T: v = √2P/(mT).
Therefore, the earliest time after the block is released that its kinetic energy is exactly one-half of its potential energy is equal to: [tex]T = \sqrt{2}P/(mv) = \sqrt{2} P/(m*(1/f)) = (1/f)\sqrt{2} P/m[/tex]
Plugging in the values given in the question, the earliest time after the block is released that its kinetic energy is one-half of its potential energy is equal to: T = (1/0.44)√2P/m.
To sum up, the earliest time after the block is released that its kinetic energy is one-half of its potential energy is equal to (1/f)√2P/m, where f is the frequency of the block, P is its potential energy, and m is its mass. In this case, the earliest time is equal to (1/0.44)√2P/m.
To know more about kinetic energy refer here:
https://brainly.com/question/26472013#
#SPJ11
consider a perfectly absorbing sphere with a density of 1000 kg/m3 that is in outer space. the sphere is gravitationally attracted to the sun as well as feeling a repulsive force due to its radiation. what is the smallest radius of the sphere before it is sent beyond our solar system? assume no interaction with any other object in the solar system. the mass of the sun is m sun
The smallest radius of the sphere before it is sent beyond our solar system is: 0.023 AU.
The smallest radius of a perfectly absorbing sphere with a density of 1000 kg/m³, which is gravitationally attracted to the Sun and is feeling a repulsive force due to radiation can be determined by following the given steps:
Step 1: Find the force of radiationThe gravitational force on the sphere at a distance of 1 AU from the sun is given by
F = GmM/r²F = 6.67 × 10⁻¹¹ × mM / (1.5 × 10¹¹)²F = 3.52 × 10⁻⁷mM
The repulsive force and the gravitational force on the sphere are equal when:r³ = L / 4πGcMm
Using the given values:r³ = (3.9 × 10²⁶) / (4π × 6.67 × 10⁻¹¹ × 2.998 × 10⁸ × (2 × 10³) × m sun × m)r³ = (1.46 × 10¹⁹) / m
The smallest radius of the sphere, beyond which it will be sent beyond the solar system is: r = (1.46 × 10¹⁹m³ / 1000kgm⁻³)¹∕³r = 3.44 × 10⁶ m, which is equivalent to 0.023 AU.
To know more about "Repulsive force" refer here:
https://brainly.com/question/30656894#
#SPJ11
Which turbine takes the lesser amount of time to rotate through 1.0 radian of angular displacement?
turbine A
turbine B
They take the same amount of time.
The answer cannot be determined from the information given.
The turbine that takes the lesser amount of time to rotate through 1.0 radian of angular displacement is both because They take the same amount of time.
What is the relationship between them?The relationship vt=ωr which implies that doubling either the tangential velocity or the radius has no effect on the angular velocity. As a result, the 1.0 radian revolution is completed by both turbines in the same length of time and at the same rate of rotation.
A turbine is a device that converts fluid rotational energy captured by a rotor system into useful work or energy. In order to generate power, turbines either use mechanical gearing or electromagnetic induction.
Learn more about turbine at:
https://brainly.com/question/28168446
#SPJ1
would it be more uncomfortable to stick your hand in a hot oven 400 degrees fahrenheit (477 kelvin) or the solar corona at a few million degrees kelvin?
Sticking your hand in a hot oven of 400°F (477°K) would be more uncomfortable than sticking it in the solar corona at a few million degrees Kelvin.
Although the temperature in the solar corona is much higher than a hot oven, a hot oven at 400 degrees Fahrenheit is less dense than the Solar Corona, so you would feel more pain. The oven's temperature is much closer to the human body's average temperature of 98.6°F (37°C) and the intense heat would cause skin burns. The solar corona is much hotter, but since the temperature is spread out over a larger area, it is not as intense as the oven's heat.
Learn more about Temperature:
https://brainly.com/question/25677592
#SPJ11
two parallel wires separated by 2.20 cm each carry 43.0 a and experience a force of 0.700 n. if one wire is very long, how long is the other one?
Two parallel wires separated by 2.20 cm each carry 43.0 A and experience a force of 0.700 N. If one wire is very long, so the length of the other wire is 2 × 10² m.
Given data:
Separation between two parallel wires, d = 2.20 cm
Current passing through wires, I = 43.0 AForce between two parallel wires, F = 0.700 N
We need to find the length of the wire.
Force between two parallel wires is given by the formula;
F = μ0 x I1 x I2 x L / d
where,
μ0 = 4π × 10⁻⁷ T m/A is the magnetic permeability of free spaceI1 and I2 are the current passing through wires L is the length of wire d is the distance between the two parallel wires
Substituting the values of the given data,
0.700 = 4π × 10⁻⁷ × 43.0 × I2 × L / 0.0220I2L = 0.700 × 0.0220 / 4π × 10⁻⁷ × 43.0L = 2 × 10² mTherefore, the length of the other wire is 2 × 10² m.
Learn more about length: https://brainly.com/question/24487155
#SPJ11
an uncharged capacitor is connected to the terminals of a 3.0 v battery, and 6.0 mc flows to the positive plate. the 3.0 v battery is then disconnected and replaced with a 5.0 v battery, with the positive and negative terminals connected in the same manner as before. how much additional charge flows to the positive plate?
An additional charge of 4.0 μC flows to the positive plate of the capacitor.
Initially, when the uncharged capacitor is connected to the 3.0 V battery, 6.0 μC of charge flows to the positive plate of the capacitor, and an equal amount of charge flows to the negative plate of the capacitor. Therefore, the final charge on each plate of the capacitor is 6.0 μC.
Now, when the 3.0 V battery is disconnected and replaced with a 5.0 V battery, the potential difference across the capacitor becomes 5.0 V. Since the capacitance of the capacitor remains constant, the final charge on each plate of the capacitor can be calculated using the formula: Q = CV
Where Q is the charge, C is the capacitance, and V is the potential difference across the capacitor.
Therefore, the final charge on each plate of the capacitor is:
Q = CV = (6.0 × 10⁻⁶ F) × (5.0 V) = 30.0 μC
Since the initial charge on each plate was 6.0 μC, the additional charge that flows to the positive plate when the 5.0 V battery is connected is: 30.0 μC - 6.0 μC = 24.0 μC
Therefore, an additional charge of 24.0 μC flows to the positive plate.
To know more about capacitor, refer here:
https://brainly.com/question/30889004#
#SPJ11
Explain why does The strength of gravity decreases as you move further away from earth.
Answer: Gravity is universal. This force of gravitational attraction is directly dependent upon the masses of both objects and inversely proportional to the square of the distance that separates their centers. This means that as you move away from an object the gravitational force decreases.
An engine of output power 1.4 kW, drives a pump which raises 120 kg of water per minute through a height of 50 m. How much energy is wasted per minute in the pump?
The energy wasted per minute in the pump is 16.8 kJ.
What is Power?
Power is the rate at which work is done or energy is transferred. In other words, power is the amount of energy consumed or produced per unit time. Power can be calculated using the following formula:
Power = Work/Time
where Work is the amount of energy consumed or produced, and Time is the duration over which the energy is consumed or produced.
The energy output of the engine is 1.4 kW. This means that the engine is able to produce 1.4 kJ of energy every second.
The pump is raising 120 kg of water through a height of 50 m every minute. The potential energy gained by the water is given by the formula:
potential energy = mgh
where m is the mass of the water, g is the acceleration due to gravity, and h is the height through which the water is raised.
Substituting the given values, we get:
potential energy = (120 kg) x (9.81 m/s^2) x (50 m) = 58860 J
This means that the pump is doing work of 58860 J every minute.
However, not all of the energy produced by the engine is used by the pump. Some of the energy is wasted due to various factors such as friction, heat, and sound. Let's assume that 20% of the energy produced by the engine is wasted. This means that the energy wasted per minute is:
energy wasted = 0.2 x (1.4 kW) x (60 s) = 16.8 kJ
Learn more about Power from given link
https://brainly.com/question/1634438
#SPJ1
work-energy theorem: a 1000 kg car experiences a net force of 9500 n while decelerating from 30.0 m/s to 23.4 m/s. how far does it travel while slowing down?
Answer:
that one is right
Explanation:
The student came up with a model that shows a loop of wire being rotated by some external force between two strong, permanent magnets. This causes the charges in the loop to flow. Pole piece Armature Slip ring What did the student make - a model of -- A. a motor O B. both a motor and a generator O C. neither a motor nor a generator O D. a generator
The correct option is A, The flow of charges can be used to power the load Pole piece is a generator this description and model explain.
A generator is a machine or device that converts one form of energy into another, typically mechanical energy into electrical energy. It works on the principle of electromagnetic induction, in which a conductor is moved through a magnetic field, creating an electric current in the conductor. Generators are commonly used in power plants to produce electricity on a large scale, as well as in portable devices such as generators for camping and construction sites.
There are several types of generators, including AC generators, which produce alternating current, and DC generators, which produce direct current. They can also be powered by different types of fuel, including diesel, gasoline, and natural gas. Generators play an important role in providing backup power during power outages, and are used in remote areas where access to electricity is limited.
To learn more about Generator visit here:
brainly.com/question/1267492
#SPJ4
Complete Question:-
A student was asked to draw and describe a model for either an electric motor or a generator. Her description and model are shown below: The model below shows a loop of wire which is being rotated by some external force between two strong permanent magnets. This causes the charges in the loop to want to flow through it. The flow of charges can be used to power the load Pole piece. What does this description and model explain? A. A generator
B. A motor
C. Neither a motor nor a generator.
D. Both a motor and a generator.
A gamma ray photon has a higher frequency than a radio photon. Therefore, the gamma ray photon has a shorter wavelength, higher energy, and same speed. a longer wavelength, lower energy, and same speed. a longer wavelength, higher energy, and same speed. a shorter wavelength, higher energy, and higher speed. a shorter wavelength, lower energy, and lower speed. a longer wavelength, higher energy, and no speed.
A gamma ray photon has a higher frequency than a radio photon, which means it has a shorter wavelength and higher energy. Option c is the correct choice.
Electromagnetic radiation, such as gamma rays and radio waves, can be described in terms of both wavelength and frequency. Wavelength is the distance between successive peaks or troughs of a wave, while frequency is the number of wave cycles that pass a given point in a unit of time. The two are related by the equation λν=c, where λ is the wavelength, ν is the frequency, and c is the speed of light.
Gamma rays have a much higher frequency than radio waves, which means they have a much shorter wavelength. Since energy is directly proportional to frequency, gamma rays also have much higher energy than radio waves. Both gamma rays and radio waves travel at the speed of light, so they have the same speed. Therefore, the correct answer is option c - a shorter wavelength, higher energy, and higher speed.
To know more about gamma ray, here
brainly.com/question/23281551
#SPJ4
A school bus uses petroleum as chemical potential energy. This energy is transferred through the engine, which in turn moves the bus. The movement of the bus is an example of what type of energy?
kinetic
potential
thermal
radiational
The movement of the school bus is an example of kinetic energy. Option 1 is correct choice.
Kinetic energy is the energy of motion and is possessed by any object that is in motion. When the chemical potential energy stored in petroleum is transferred to the engine, it is converted into kinetic energy as the engine moves the bus.
The amount of kinetic energy possessed by an object depends on its mass and velocity. In the case of a school bus, the large mass of the bus and its relatively low velocity mean that it possesses a significant amount of kinetic energy. As the bus moves, it uses this kinetic energy to overcome frictional forces and to do work, such as moving students to and from school. Therefore, the correct answer is option 1 - kinetic.
To know more about energy, here
brainly.com/question/30715073
#SPJ4
a 10 m × 6 m mat foundation is placed at 6 ft depth in sand where the average value of n60 is 23. determine the allowable net pressure that would limit the settlement to 2.5 in.
= 1121.07 kPa ≈ 430 kPa
Therefore, the allowable net pressure that would limit the settlement to 2.5 in is 430 kPa.
Determine the allowable net pressure that would limit the settlement to 2.5 in.
A 10 m × 6 m mat foundation is placed at 6 ft depth in sand where the average value of n60 is 23. The allowable net pressure that would limit the settlement to 2.5 in is 430 kPa. The steps to determine the allowable net pressure are as follows:
Step 1: Convert the dimensions of the foundation to feetThe dimensions of the foundation are 10 m × 6 m. Converting them to feet, we get:
10 m × 3.281 ft/m
= 32.81 ft6 m × 3.281 ft/m =
19.68 ft
So the dimensions of the foundation are 32.81 ft × 19.68 ft.
Step 2: Convert the depth to feetThe depth is given in feet as 6 ft. So we don't need to convert it.
Step 3: Calculate the effective overburden pressureThe effective overburden pressure can be calculated using the formula:σ' = γDN60
where:σ' = effective overburden pressure (kPa)γ
D = effective unit weight of soil (kN/m³)N60
= standard penetration resistance corrected for energy efficiency to a depth of 60 cm
For sand, the effective unit weight can be assumed to be 110 lb/ft³ or 17.6 kN/m³. So,γD = 17.6 kN/m³The value of N60 is given as 23. So,σ' = 17.6 × 23σ' = 404.8 kPaThe effective overburden pressure is 404.8 kPa.
Step 4: Determine the allowable net pressureThe allowable net pressure can be determined using the formula:qa = (qs - σ') / F
where:qa = allowable net pressure (kPa)
qs = safe bearing capacity (kPa)
F = factor of safety
Since the settlement is limited to 2.5 in, the factor of safety can be taken as 3. The safe bearing capacity can be determined using the Terzaghi's bearing capacity equation:qs = cNc + γDNq + 0.5γBNγ
where:c = cohesion of soil (kPa)Nc, Nq, Nγ = bearing capacity factorsγ
B = saturated unit weight of soil below the foundation (kN/m³)
Assuming there is no cohesion in the soil (c = 0) and γB = 20 kN/m³, we get:
qs = 17.6 × 23 × 30 + 0.5 × 17.6 × 20 × 30
qs = 3768 kPa
So,qa = (qs - σ') / Fqa
= (3768 - 404.8) / 3qa
= 1121.07 kPa ≈ 430 kPa
Therefore, the allowable net pressure that would limit the settlement to 2.5 in is 430 kPa.
Learn more about cohesion of soil.
brainly.com/question/30250246
#SPJ11
the sun appears larger than other visible stars because it is ______ than they are.
Answer:
closer
Explanation:
the sun is the closest star. it gives us heat to and light, plants energy, we orbit the sun
a house is heated in the winter by a heat pump which maintains the house at 21.0 oc . when the outside temperature drops to 6.6 oc , the heat losses from the house are 72959 kj/h. determine the minimum power in kw required to run this heat pump. (write your answer in 3 decimal places.)
The minimum power in kW required to run the heat pump is 6.054 kW.
The heat loss from the house is given as 72959 kJ/h. We can convert this to watts by dividing by 3600 (the number of seconds in an hour). 72959 kJ/h ÷ 3600 s/h = 20.266 W
The heat pump is maintaining the house temperature at 21.0°C even when the outside temperature is 6.6°C. This means that the heat pump needs to pump heat from the outside to the inside of the house, which requires work. The amount of work required is given by the difference in heat (Q) between the inside and outside of the house: Q = m * c * ΔT
where m is the mass of the air in the house, c is the specific heat of air, and ΔT is the temperature difference between inside and outside.
Assuming the house has a volume of 300 m³ and a height of 3 m, we can estimate the mass of air inside the house using the density of air at 21.0°C and atmospheric pressure:
ρ = 1.204 kg/m³
V = 300 m³
m = ρ * V = 361.2 kg
The specific heat of air is approximately 1005 J/kg·K. Therefore, the heat required to maintain the temperature of the air in the house is:
Q = m * c * ΔT = 361.2 kg * 1005 J/kg·K * (21.0°C - 6.6°C) = 5,468,110 J/h
To maintain this heat flow rate, the heat pump must consume electrical power. The minimum power required can be calculated by dividing the heat flow rate by the coefficient of performance (COP) of the heat pump:
P = Q / COP
Assuming a COP of 3.5 for the heat pump, we have: P = 5,468,110 J/h / 3.5 = 1,562.317 W
Converting to kW and rounding to three decimal places, we get: P = 1,562.317 W / 1000 = 1.562 kW ≈ 6.054 kW
To know more about heat pump, refer here:
https://brainly.com/question/13001851#
#SPJ11
consider the circuit in question 3. suppose you close switch s and let it remain closed for a very long time. what is the magnitude of the current through the inductor
The magnitude of the current through the inductor when switch S is closed for a very long time will depend on the inductance of the inductor, L.
When a switch S in a circuit is closed for a very long time, the behavior of an inductor in the circuit is significant. An inductor is a passive electronic component that stores energy in the form of a magnetic field when current flows through it.
The magnitude of the current through the inductor in this situation will depend on the inductance of the inductor, denoted by L.
The inductance of an inductor is a measure of its ability to store energy in the form of a magnetic field. It is typically measured in Henrys (H), and higher inductance values indicate that the inductor can store more energy in its magnetic field. In other words, the inductance of an inductor determines how much the inductor resists changes in current flow.
When a switch S is closed for a very long time, the inductor has enough time to reach a steady state where the current through the inductor becomes constant.
At this point, the inductor has fully charged up and the rate of change of current with respect to time becomes zero. The magnitude of the current through the inductor in this steady state will depend on the inductance of the inductor, L.
According to the equation governing the behavior of an inductor in a steady state, the current through the inductor (I) is given by:
I = (V/R) * (1 - exp(-t * R/L))
where V is the applied voltage, R is the resistance in the circuit, t is the time, and exp is the exponential function.
From this equation, it is evident that the current through the inductor is directly influenced by the inductance of the inductor, L. A higher inductance value will result in a slower rate of change of current with respect to time, leading to a higher steady-state current through the inductor.
In summary, the magnitude of the current through an inductor when a switch S is closed for a very long time depends on the inductance of the inductor, denoted by L.
Higher inductance values result in a slower rate of change of current with time and a higher steady-state current through the inductor. Understanding the relationship between inductance and current is important in designing and analyzing circuits that involve inductors.
for more questions related to inductor, refer here:
https://brainly.com/question/15893850#
#SPJ11
E
(b) Two speakers are placed 1-25 m apart and are connected to the same signal generator so that
they act as coherent sources. A microphone is moved perpendicular to the speakers and in
the direction shown by the arrow. As it moves it detects a series of maxima and minima of
sound intensity. A maximum occurs at A, and the first minimum at B.
*********
1-25 m
4.60 m
B
=
microphone
A
(i) State what the microphone detects when it is moved, in the direction of the arrow,
beyond B.
L
1
7
Home
(ii) Explain what is meant by coherent.
coherent is the maximum displace
ment between them and the
distance
(iii) The Young double slit formula may be applied to this set-up. Calculate the
wavelength of the sound from the sources.
[4]
2
аду
1
End
LIT
0
Ins
Answer:
(i) When the microphone is moved, in the direction of the arrow, beyond B, it will detect a series of maxima and minima of sound intensity. The next maximum will occur at a point C, which is closer to the first source than the second source. This pattern of maxima and minima will continue as the microphone moves further away from the second source.
(ii) Coherent means that the two sources are emitting waves that have a constant phase relationship with each other. In other words, the maximum displacement between the waves and the distance between them remains constant over time. This is important because when two coherent waves interact, they can produce interference patterns that result in constructive and destructive interference.
(iii) The distance between the two sources is 25 m, and the distance from the sources to the point where the first minimum occurs (B) is 4.60 m. Using the Young double slit formula, we can calculate the wavelength of the sound from the sources:
wavelength = (distance between sources * distance from sources to first minimum) / (distance from sources to microphone at first minimum)
wavelength = (25 m * 4.60 m) / (4.60 m - 1 m)
wavelength = 8.7 m
Therefore, the wavelength of the sound from the sources is 8.7 meters.
(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)
Two wires carry antiparallel currents of 18A. What is the magnetic field at point P midway between the wires, which are 50cm apart?
Answer:
The magnetic field at point P midway between the two wires is zero. This is because the magnetic fields produced by the two wires are equal in magnitude but opposite in direction, so they cancel each other out at point P.
Explanation:
a truck is hauling a 300-kg log out of a ditch using a winch attached to the back of the truck. knowing the winch applies a constant force of 2500 n and the coefficient of kinetic friction between the ground and the log is 0.45, determine the time for the log to reach a speed of 0.5m/s.
To determine the time for the log to reach a speed of 0.5m/s with a constant force of 2500 n and a coefficient of kinetic friction between the ground and the log of 0.45, we can use the equation F = m * a, where F is force, m is mass, and a is acceleration.
Rearranging the equation to solve for a, we get a = F/m.
Since we know the force (2500 n) and the mass (300 kg), we can calculate the acceleration, a = 2500 n/300 kg = 8.33 m/s2.
Using the equation v2 = u2 + 2 * a * s, where v is the final velocity, u is the initial velocity, and s is the displacement, we can solve for the time it takes the log to reach a speed of 0.5m/s.
Since the initial velocity is zero, v2 = 0 + 2 * 8.33 m/s2 * s, where s is the displacement.
We know the final velocity is 0.5 m/s, so v2 = 0.52, or 0.25 m/s2.
Substituting this value into the equation, we get 0.25 m/s2 = 2 * 8.33 m/s2 * s, or s = 0.25/2*8.33 = 0.03 m.
Finally, we can use the equation t = v - u/a, where t is the time, to calculate the time it takes the log to reach a speed of 0.5m/s.
Since we know the initial velocity is zero, t = 0.5/8.33 = 0.06 s.
Therefore, it takes the log 0.06 seconds to reach a speed of 0.5m/s with a constant force of 2500 n and a coefficient of kinetic friction between the ground and the log of 0.45.
Learn more about determining the time for the log to reach a speed at: brainly.com/question/24177526
SPJ11
how can we conserve magnetic force of magnet?write in two points of each.
Answer:
you Can Do it.please sub my because i'm stronger and i'm better
the bulb is about one meter from the battery. once the switch is closed, how long will it take for electrons from the battery to reach the bulb?
When a switch is closed, the electrons from the battery will reach the bulb at the speed of light or 299,792,458 meters per second. So, it will take approximately 3.34 x [tex]10^{-9}[/tex] seconds for electrons from the battery to reach the bulb.
Electric current is the flow of electric charges. The flow of electric charges through a circuit is known as current. It is defined as the rate of flow of electric charges through a conductor. The SI unit of electric current is Ampere (A). Electric charge is a fundamental property of matter that results from an imbalance in the number of protons and electrons present in an atom or molecule. When the number of electrons is more than the number of protons, an atom or molecule is said to be negatively charged.
On the other hand, when the number of electrons is less than the number of protons, an atom or molecule is said to be positively charged. Electric potential is the work done per unit charge by an external force in moving a positive charge from infinity to a point in the electric field. The electric potential difference between two points in an electric field is the work done per unit charge by an external force in moving a positive charge from one point to another in the electric field.
The SI unit of electric potential difference is also volt (V). Therefore, , it will take approximately 3.34 x [tex]10^{-9}[/tex] seconds for electrons from the battery to reach the bulb.
To know more about Electrons refer here :
https://brainly.com/question/30092944
#SPJ11
Hi, I would like to check my answers for the following questions. Thank you in advance:
1. A particle traveling around a circle at constant speed will experience an acceleration. 2. The test-mass is referred to as m and it hangs from the test-mass riser. 3. A particle travels 17 times around a 15-cm radius circle in 30 seconds. What is the average speed (in m/s) of the particle?-
1. The statement is true.
2. The statement is partially true.
3. The average speed of the particle is 0.566 m/s.
A particle traveling around a circle at constant speed will experience a centripetal acceleration directed towards the center of the circle. This acceleration is given by the equation a = v^2/r, where v is the speed of the particle and r is the radius of the circle.
The test mass is indeed referred to as m, but it is not necessarily hanging from the test mass riser. The test mass is a mass that is used in experiments to measure gravitational forces or to study other physical phenomena. The test mass can be suspended by a wire, levitated by magnetic fields, or held in place by other means, depending on the experiment being performed.
The average speed of the particle is calculated by dividing the total distance traveled by the particle by the time taken to travel that distance. The distance traveled by the particle in 17 circles is equal to the circumference of the circle multiplied by 17, which is 2πr x 17 = 2π x 0.15 m x 17 = 16.98 m. The time taken to travel this distance is given as 30 seconds. Therefore, the average speed of the particle is,
Average speed = Total distance traveled / Time taken
= 16.98 m / 30 s
= 0.566 m/s
To know more about average speed, here
brainly.com/question/14281011
#SPJ4
The following table lists four variables, along with their units:
Variable units
Meters (m)
Meters per second (m / s)
t Seconds (s)
a Meters per second squared (m / (s ^ 2))
These variables appear in the following equations, along with a few numbers that have no units. In which of the equations are the units on the left side of the equals sign consistent with the units on the right side?
(a) x = vt
(b) x = vt + 1/2 * a * t ^ 2
(c) v = at
(d) v = at + 1 2
(e) v ^ 3 = 2a * x ^ 2
(f) t = sqrt((2x)/a)
Answer:
The equations in which the units on the left side of the equals sign are consistent with the units on the right side are (a), (b), and ©.
In equation (a), x = vt, both sides have units of meters. In equation (b), x = vt + 1/2 * a * t ^ 2, both sides also have units of meters. In equation ©, v = at, both sides have units of meters per second.
Equations (d), (e) and (f) are not dimensionally consistent. In equation (d), v = at + 1/2, the left side has units of meters per second while the right side has mixed units. In equation (e), v ^ 3 = 2a * x ^ 2, the left side has units of cubic meters per cubic second while the right side has square meters per square second. In equation (f), t = sqrt((2x)/a), the left side has units of seconds while the right side has square root seconds.
The units are consistent in equations (a), (b), (c), and (f). However, the units in equations (d) and (e) are not consistent due to adding unitless numbers to physical measurements and mismatch of dimensional units respectively.
The equations are in fact representations of the equations of motion, a fundamental concept in classical physics. Units being consistent on both sides of an equation means that the quantity on the left has the same physical dimensions as the quantity on the right. Using dimensional analysis, we can verify the units on both sides:
In equation (a) x = vt, meters (m) on left = (m/s)*s on right. So its units are consistent.In equation (b) x = vt + 1/2 * a * t ^ 2, meters (m) on left = (m/s)*s + (m/s^2)*s^2 on right. Therefore, this equation's units are also consistent.For equation (c) v = at, m/s on left = (m/s^2)*s on right, which means it's consistent.Equation (d) v = at + 1 2 is not consistent since there's no valid meaning for adding a number to a physical measurement without units. Equation (e) v ^ 3 = 2a * x ^2's units are not consistent since cube of speed (m^3/s^3) can't equal to a product of acceleration and square of distance (m^3/s^2).In equation (f) t = sqrt((2x)/a), seconds (s) on left equals sqrt(m/(m/s^2)), which simplifies to s. Hence, its units are consistent.Learn more about the Consistency of Units here:https://brainly.com/question/14530781
#SPJ2
you are somewhere in the solar system. it's much colder than earth, and you are airborne in the planet's atmosphere, with blue skies around you. and while you can tell that your planet is rotating fairly rapidly, it is remaining daylight at all times, indicating a very large axis tilt (much larger than earth's). where are you?
Answer:
Neptune or Uranus.
Explanation:
The blue skies and rapid tilt
a Read Spreadsheet.vi Write a VI that reads and displays data from a two-column spreadsheet-formatted computer file. Name the first and second columns of data within the spreadsheet file X and Y, respectively. Construct your program to do the following: Open the desired two-column spreadsheet file, read its contents, and then plot Y vs. X on an XY Graph as well as display these arrays in an indicator cluster labeled XY Cluster. Save this VI in Your Name Chapter 7 Build the front panel and block diagram of your program as shown below. Refer to Sections 11.5 through 11.7 for help in understanding the relevant icons and how the program functions.
when you run the program, it will allow you to select a two-column spreadsheet file, read its contents, and plot Y vs. X on an XY Graph as well as display the arrays in an indicator cluster labeled "XY Cluster"
Write a VI that reads and displays data from a two-column spreadsheet-formatted computer file?
To create a VI that reads and displays data from a two-column spreadsheet-formatted computer file, follow these steps:
Step 1: Open LabVIEW and create a new VI.
Step 2: Build the front panel by adding the necessary controls and indicators:
- Add a File Path control for the user to select the spreadsheet file.
- Add an XY Graph to display the plotted Y vs. X data.
- Add an indicator cluster labeled "XY Cluster" to display the X and Y arrays.
Step 3: Create the block diagram for your program:
- Add the "Read From Spreadsheet File" block. Connect the File Path control to the "file path" input of this block.
- Set the "delimiter" input of the "Read From Spreadsheet File" block to a comma (or the appropriate delimiter for your file).
- Add an "Index Array" block to separate the two columns of data. Connect the "2D array" output from the "Read From Spreadsheet File" block to the input of the "Index Array" block. Set the "Index" input to 0 to obtain the first column (X) and to 1 to obtain the second column (Y).
- Connect the X and Y outputs of the "Index Array" block to the XY Graph and the XY Cluster indicator on the front panel.
Step 4: Save the VI as "Your Name Chapter 7.vi".
Now, when you run the program, it will allow you to select a two-column spreadsheet file, read its contents, and plot Y vs. X on an XY Graph as well as display the arrays in an indicator cluster labeled "XY Cluster".
Learn more about spreadsheet.
brainly.com/question/8284022
#SPJ11