7. A monkey freefalls for 17.5 seconds. (a) What was the velocity after this time? (b) How far did it fall?

Answer:

The frequencies the other string could have are 258.4 Hz and 261.6 Hz.

Explanation:

Given;

beat frequency, Fb = 1.60 Hz

frequency of the first string, F₁ = 260.00 Hz

frequency of the second string, F₂ = ?

Beat frequency is given as;

Fb = F₂ - F₁     or      Fb = F₁ - F₂

Fb + F₁ = F₂    or      F₂ = F₁ - Fb

1.6 + 260 = F₂   or   F₂ = 260 - 1.6

261.6 Hz = F₂  or   F₂ = 258.4 Hz

Therefore, the frequencies the other string could have are 258.4 Hz and 261.6 Hz.

Answer:

0.56 km/s

Explanation:

We will define a single system of units for measurement, for this case meters per second [m/s]. That is, we must convert the rest of units such as centimeters per second and kilometers per second to meters per second.

[tex]560[\frac{cm}{s}]*(\frac{1m}{100cm} )=5.6[m/s]\\0.56[\frac{km}{s}]*(\frac{1000m}{1km} )=560[m/s][/tex]

Therefore the speed of 0.56 [km/s] is the greatest of all

Answer:

[tex]W=8.93\cdot 10^{-30}\ N[/tex][tex]\mathbf{W=8.93\cdot 10^{-30}\ N}[/tex]

Explanation:

Mass and Weight

The mass of an object is a measure of the object's amount of matter it contains. It's expressed in Kilograms or similar units.

The weight of an object is a measure of the force exerted on the object by gravity. It's often expressed in Newtons or similar units.

The formula to calculate the weight of an object with known mass m is:

W = m.g

Where g is the acceleration of gravity in the place it's located. We are given the mass of an electron:

[tex]m=9.109\cdot 10^{-31}\ Kg[/tex]

On Earth, the acceleration of gravity is:

[tex]g=9.8\ m/s^2[/tex]

Thus, the weight is:

[tex]W =9.109\cdot 10^{-31}\ Kg*9.8\ m/s^2[/tex]

[tex]\mathbf{W=8.93\cdot 10^{-30}\ N}[/tex]

Answer:

Explanation:

The work done by an object can be found by using the formula

workdone = force × distance

From the question we have

workdone = 2.060 × 3.5

We have the final answer as

Hope this helps you

Only weigh is a force. force is mass multiplied by acceleration. weight is the mass plus the gravitational force acting on it.          

The difference between mass and weight is that mass is a measure of inertia and weight is a measure of force. We  use both of these terms interchangeably but this is not quite correct.

Mass can be defined as how much a material an object is made up of. so considering the smallest particles we can say that the number of protons, neutrons, and electrons in an object is a simply the measure of its mass. Mass, can be referred as  both a property of an object and a measure of an object's resistance to acceleration.  kilograms and grams is the unit of mass.

The weight of an object can be referred as the force acting on it because or due  to gravity. That is, the gravitational interactions between bodies and masses, and when they interacts with the Earth, that force will be considered as the weight. its Unit is Newtons.

Learn more about Force here https://brainly.com/question/388851

#SPJ9

Answer:

The beat period of the composite wave is 0.11 s.

Explanation:

Given;

frequency of the first sound wave, F₁ = 223 Hz

frequency of the second sound wave, F₂ = 214 Hz

The beat frequency is given as;

Fb  = F₁ - F₂

Fb = 223 Hz - 214 Hz

Fb = 9 Hz

The beat period is given as;

[tex]T_b = \frac{1}{F_b} \\\\T_b = \frac{1}{9} \\\\T_b = 0.11 \ s[/tex]

Therefore, the beat period of the composite wave is 0.11 s.

Answer:

Static, sliding, and rolling friction occur between solid surfaces. Static friction is strongest, followed by sliding friction, and then rolling friction, which is weakest. Fluid friction occurs in fluids, which are liquids or gases.

Explanation:

Answer:

τ = 0.009 Nm

Explanation:

The torque applied on the tooth can be given by the following formula:

[tex]\tau = Fd[/tex]

where,

τ = Torque on the tooth= ?

F = Force acting on tooth = 9 N

d = distance between force and tooth axis = 1 mm = 0.001 m

Therefore, using these values in the equation, we get:

[tex]\tau = (9\ N)(0.001\ m)[/tex]

τ = 0.009 Nm

Answer:

It is a value that reading in the galvanometer must be multiplied with to get the ordinary unit

Explanation:

What is a galvanometer?

A galvanometer is an electromechanical instrument used for detecting and indicating an electric current.

A Number by which a certain function of the reading of a galvanometer must be multiplied to obtain the current value in ordinary units is a galvanometer constant

Answer:

[tex]CPD = 80[/tex]

[tex]PCD = 44[/tex]

Explanation:

Given

[tex]AB || CD[/tex]

[tex]BAD = 56[/tex]

[tex]CPA = 100[/tex]

See attachment

Required

Determine PCD and CPD

First, we need to calculate CPD

Since DPA is a straight line and CPA = 100;

We have that:

[tex]CPA + CPD = 180[/tex] --- angle on a straight theorem

Substitute 100 for CPA

[tex]100 + CPD = 180[/tex]

Subtract 100 from both sides

[tex]100-100 + CPD = 180-100[/tex]

[tex]CPD = 80[/tex]

Next, we calculate PCD

We have that:

[tex]DAB= ADC = 56[/tex]  --alternate angle

In triangle PCD

[tex]PCD + CPD + PDC = 180[/tex] --- angles in a triangle

Where

[tex]PDC = ADC = 56[/tex]

So, we have:

[tex]PCD +80 + 56 = 180[/tex]

[tex]PCD +136 = 180[/tex]

Subtract 136 from both sides

[tex]PCD = 180 - 136[/tex]

[tex]PCD = 44[/tex]

Answer:

L/E =de/dl so dl is 10m de=4m E=5N

Explanation:

L=(de x E)/dl = 2N

so when load is < effort it is speed multiplayer

Answer:

[tex]velocity(x)=15\,\frac{\pi}{4}\,cos(\frac{\pi}{4}x)[/tex]

Max speed = [tex]\frac{15\, \pi}{4} \,\, \frac{m}{s}[/tex]

Max acceleration = [tex]\frac{15\,\pi^2}{16} \,\,\frac{m}{s^2}[/tex]

Explanation:

Given the description of period and amplitude, the SHM could be described by:

[tex]f(x)=5\,sin(\frac{\pi}{4}x)[/tex]

and its angular velocity can be calculated doing the derivative:

[tex]f(x)=5\, \,sin(\frac{\pi}{4}x)\\f'(x)=5\,\frac{\pi}{4}\,cos(\frac{\pi}{4}x)[/tex]

And therefore, the tangential velocity is calculated by multiplying this expression times the radius of the movement (3 m):

[tex]velocity(x)=15\,\frac{\pi}{4}\,cos(\frac{\pi}{4}x)[/tex]  and is given in m/s.

Then the maximum speed is obtained when the cosine function becomes "1", and that gives:

Max speed = [tex]\frac{15\, \pi}{4} \,\, \frac{m}{s}[/tex]

The acceleration is found from the derivative of the velocity expression, and therefore given by:

[tex]acceleraton(x)=-15\,\frac{\pi^2}{16}\,sin(\frac{\pi}{4}x)[/tex]

and the maximum of the function will be obtained when the sine expression becomes "-1", which will render:

Max acceleration = [tex]\frac{15\,\pi^2}{16} \,\,\frac{m}{s^2}[/tex]

The average acceleration of the car over 3 seconds is -7 m/s².

Acceleration is defined as the rate of change of velocity with respect to time. Mathematically -

a = Δv/Δt

Given is a car that car slows from 36 m/s to 15 m/s over 3 seconds.

We can calculate acceleration as follows -

a = Δv/Δt

a = (15 - 36)/(3)

a = -21/3

a = - 7m/s²

Therefore, the average acceleration of the car over 3 seconds is -7 m/s².

To solve more questions on Kinematics, visit the link below-

https://brainly.com/question/14510969

#SPJ2

Answer:

magma

Explanation:

I wanna think that that's right if it's not in so sorry but I'm pretty sure it's magma

Intrusive magma forced up towards the ocean ridge is the force responsible for seafloor spread. The correct option is B.

Seafloor spreading is a process that occurs at mid-ocean ridges where the oceanic crust is produced by volcanic activity and then moves away from the ridge.

Plate tectonics' continental drift is explained by seafloor spreading. When oceanic plates diverge, tensile stress causes fractures in the lithosphere.

Ridge push occurs when plates are not subducting and are driven by gravity as they slide off the elevated mid-ocean ridges.

Magma rises from the fractures at a spreading center and cools on the ocean floor to form a new seabed.

The spreading rate is the rate at which an ocean basin widens due to seafloor spreading and determines whether the ridge is fast, intermediate, or slow.

Thus, the correct option is B.

For more details regarding seafloor spreading, visit:

https://brainly.com/question/15122129

#SPJ6

Answer:b) 4.5×10^9km

Explanation:use s= vt/1000 here, v= speed of light which is 3×10^8m/s

t= time in second

Pretty sure answer is B

due to the fact your exerting extra force down on the lawn mower to move it

The atoms come from the parents of the puppies and were formed by biosynthesis in the bodies of the parent dogs.

The term biological molecules are those molecules that are important for life. These are the molecules that are involved in the processes of life that take place in an organism.

Now, from the time of conceptions, the biomolecules in the new organism begins to form. Recall that the DNA is the molecule that is used to store the genetic information of an organism. Now et us recall that the DNA is passed on from the parents to the offspring.

Now, we know that the atoms that compose these puppies come from the parent organisms. The molecules in which the atoms are formed are formed during the natural processes that were taking place in the bodies of the parents of puppies. This occurs by the process of reproduction.

Learn more about biomolecules:https://brainly.com/question/28644695

#SPJ1

The law of conservation of mass states that mass in an isolated system is neither created nor destroyed by chemical reactions or physical transformations. According to the law of conservation of mass, the mass of the products in a chemical reaction must equal the mass of the reactants.

Answer:

Steel Wool + Oxygen, Steel wool has a hard texture but is a grayish color. It looks like it's a powder, and also that it was rusted steel wool and then broken apart converted into a powder. So Iron oxide is 7 grams and combined steel wool is 7 grams, so you may assume that the mass has been retained. Yeah, it is a chemical change since the corrosion and rust in steel wool is a chemical process, but iron oxide is triggered by a physical change.

Egg + Heat, In the center, the egg has a yellow yolk while at the edge of the egg there is a kind of liquid, but it is visible, the heat becomes hot but clear The egg transformed into a delicious food called an omelet, which was yolk staid as a liquid but got a little harder, It was retained because the eggshell was 4 grams and the fried egg is 41 grams, but the clear border around it changed color. It is a chemical transition, and it results in the creation of new particles and the chemical bonds split apart and new ones are formed

Water + Heat, Water is a clear liquid, while the heat is very hot yet transparent. Once 5 g of liquid is a gas, it'll become 5 g of water vapor. Water + Heat Water is really a clear liquid. The mass of the liquid water is simply transformed into mass of the water vapor that is freshly created. There was no chemical process although water vapor can also be converted back to water, but it only shifted from a liquid to a gas and the structure did not change.

Zinc + Hydrogen Chloride Zinc, a metal white/silver solid. A clear, colorless liquid fluid with a really low pH in hydrogen chloride In hydrogen chloride, zinc is “dissolved” while releasing a colorless vapor. The liquid, possibly still having a low pH from the remaining acid, stays a colorless liquid.As sparked with a burning wooden splint, the colorless gas gathered in a tube provides a loud bang, because it is neither air trapped in the zinc, nor absorbed in hydropower acids. Well, even if the zinc is 12 grams and not 15 grams, the gas released was 3 grams and, as we all know, 3 + 12 is 15, so you could claim also that volume has also been saved.

Sodium Hydroxide + Copper, Sulfate Sodium hydroxide is a turbid solution and bright blue crystals are formed from copper sulfate A pale blue powder of basic copper hydroxide a solution of neutral salt sulfuric acid would be produced when their solutions are mixed with each other. The combined sodium hydroxide and copper sulfate make a total of 67 grams and the product is split because the sodium sulfate is 47 grams and the copper hydroxide is 20 grams, but all together it is still 67 grams, and you could assume that now the mass has been conserved. The evidence of a response was its image of royal blue basic copper hydroxide precipitates and a neutral salt sodium solution

Explanation:

Answer:

An induction is the process a new recruit goes through to be introduced to the company and their new role. ... Beyond the initial days, the induction programme continues for many months, so that the new employee can fully integrate into life in the company and settle into their role to become a valuable member of staff.

Explanation:

hope this help

pick me as the brainliest

Answer:

0 m/s^2

Explanation:

If you're driving at constant speed in the same direction, your acceleration is always 0 m/s^2. acceleration is a vector, so any change in speed or direction would result in acceleration.

Answer:

Work done = 1/2 × Ne

Explanation:

Given that if  a force of N stretches a spring m beyond its natural​ length, how much work does it take to stretch the spring m beyond its natural​ length

Using Hook's law

Force = N

Let the extension = e

Work done in stretching spring m beyond its natural length will be

Workdone = 1/2 × Ne

Or

From Hook law,

N = Ke

Work done = 1/2 × Ke^2

Answer:

transparent Prism

Explanation:

The device shown is a prism. It is used to study the refraction of light according with its wavelength as it transverses from a medium (air for example) to another (either glass, fluorite, plastic), and vice versa.

For that reason is also used to separate white light into its spectral wavelength components.

Answer:

the cloth is old by 1,844 years

Explanation:

The computation is shown below:

The half-life of C^(14) is 5730 years

Now

[tex]\lambda[/tex] =1.210 × 10^-4 years^(-1)

Now

[tex]N(t) = Ce^{-\lambda\times t}[/tex]

[tex]0.8 \times (N_0) = N_0 \times e^{-\lambda \times t}\\\\ln(0.8) = (-\lambda \times t)\\\\t = \frac{-(ln(0.8))}{\lambda}[/tex]

[tex]\lambda[/tex] = .000121,

so t = 1844 yrs

hence, the cloth is old by 1,844 years

Answer:

The time spent in air by the rock before it returns to the thrower is 4.5 s

Explanation:

Given;

initial velocity of the rock, u = 22 m/s

Neglecting air resistance, the time it takes the rock to go up equals the time it takes it to return to the thrower. This is also called time of flight.

The time to go up is calculated as;

v = u - gt

where;

v is the final velocity at the maximum height

0 = u - gt

gt = u

t = u / g

t = 22 / 9.8

t = 2.245 s

thus time to go up = 2.245 s

and time to return to the thrower = 2.245s

The total time spent in air by the rock before it returns to the thrower

 = 2.245 s + 2.245s

 = 4.5 s

Answer:

410.4J

Explanation:

Step one:

given

mass= 3.35kg

weight= 3.35*9.81= 32.86N

h=12.49m

Required

The net work done

Step two:

the work done is given  as

WD= force* distance

WD= 32.86*12.49

WD= 410.4J

Answer:

I = 1.5*10⁻³ kg*m²

Explanation:

       [tex]I = \frac{1}{2}*m*r^{2} = \frac{1}{2}*0.400 kg*(0.0865m)^{2} = 1.5e-3 kg*m2[/tex]

This question is incomplete, the complete question is on the image uploaded along this answer.

Answer:

the potential at point B is 5 V, Option d) is the correct answer

Explanation:

Given that;

from the image;

R = 3 + 4 + 5 = 12 Ω

so I = 12/12 = 1 A

Q = 0 + 12 = 12 V

now

VA - VQ = - I × 3 = -3 V

VA = VQ - 3 =  12 - 3 = 9 V

VB - VA = - I × 4Ω = - 4 V

⇒VB = VA - 4 = 9 V - 4 V = 5 V

Therefore the potential at point B is 5 V

Option d) is the correct answer

Answer:

0 m/s2

Explanation:

khan