5) If the price charged for a bolt is p cents, then x thousand bolts will be sold in a certain hardware store, where p = 82 - x 26 . How many bolts must be sold to maximize revenue?

The amount in millimeters of lace they have left after finishing the quilts is 400 millimeters.

Determine how much lace is needed for each quilt. Each quilt has a perimeter that we need to cover with lace. The perimeter is the sum of all sides of a rectangle, which is (2 x width) + (2 x length).

Each quilt is 2.2 meters wide and 2.7 meters long. So, the perimeter of one quilt is (2 x 2.2) + (2 x 2.7) = 4.4 + 5.4 = 9.8 meters.

Since there are 2 quilts, the total lace needed for both quilts is 9.8 meters x 2 = 19.6 meters.

They bought a 20-meter roll of lace. To find out how much lace is left, subtract the total lace used from the initial length of the roll: 20 meters - 19.6 meters = 0.4 meters.

To convert this to millimeters, multiply by 1,000: 0.4 meters x 1,000 = 400 millimeters.

So, Franklin and his aunt have 400 millimeters of lace left after finishing the quilts.

Learn more about perimeter here: https://brainly.com/question/24571594

#SPJ11

The shape of the cross section of a right rectangular pyramid sliced vertically (down) by a plane not passing through the vertex of the pyramid m is a trapezoid. (A)

This is because when a pyramid is sliced vertically, the resulting cross section is always a two-dimensional representation of the pyramid's base.

Since the base of a right rectangular pyramid is a rectangle, slicing it vertically will result in a trapezoid-shaped cross section. The top and bottom sides of the trapezoid will be parallel, and the other two sides will be slanted.

In a right rectangular pyramid, the vertex m is located directly above the center of the rectangle base. When a plane is passed through this vertex, it will result in a triangular cross section. However, when a plane is passed through a different point, as described in the question, it will result in a trapezoidal cross section.(A)

To know more about trapezoid click on below link:

https://brainly.com/question/20847799#

#SPJ11

The centroid of the triangle is D and the measures of sides are solved

Given data ,

Let the triangle be represented as ΔPQR

Now , the centroid of the triangle is D

where the measure of PA = 17 units

The measure of BD = 9 units

And , the measure of side DQ = 14 units

Now , centroid of a triangle is formed when three medians of a triangle intersect

And , from the properties of centroid of triangle , we get

PA = AR

DR = DQ

AD = BD

On simplifying , we get

The measure of side AR = 17 units

PR = PA + AR = 34 units

The measure of side DR = 14 units

BR = BD + DR = 23 units

The measure of side AD = 9 units

AQ = AD + DQ = 23 units

Hence , the centroid is solved

To learn more about centroid of triangle click :

https://brainly.com/question/30166683

#SPJ1

The calculated area of the rectangle is 70 + 7x

From the question, we have the following parameters that can be used in our computation:

Mario cuts out and arranged the trapezoids to form a rectangle.

Using the above as a guide, we have the following:

Area of rectangle  = base * height

In this case, we have

base = 10 + x

Where x is the length of the missing side

Next, we have

height = 7

Substitute the known values in the above equation, so, we have the following representation

Area = 7 * (10 + x)

Evaluate

Area = 70 + 7x

Hence, the area of the rectangle is 70 + 7x

Read more about area at

https://brainly.com/question/24487155

#SPJ1

Cif a = 2.74 mi, b = 3.18 mi and ZC = 41.9° and c^2 = a^2 + b^2 - 2ab*cos(C)where C is the angle opposite to side c, c comes to be ≈ 4.26 mi.

The Law of Cosines is a numerical formula that relates the side lengths and points of any triangle. It expresses that the square of any side of a triangle is equivalent to the number of squares of the other different sides short two times the result of those sides and the cosine of the point between them. To get side c, we can use the law of cosines, which states that c² = a² + b² - 2ab cos(C).
Plugging in the given values, we get:
c² = (2.74)² + (3.18)² - 2(2.74)(3.18)cos(41.9°)
c² ≈ 18.126
Taking the square root of both sides, we get:
c ≈ 4.26 mi
Rounding to 2 decimal places, c ≈ 4.26 mi.
Therefore, the answer is: c ≈ 4.26 mi.

Learn more about cif here, https://brainly.com/question/17338477

#SPJ11

The expression given in a simplified form is n³⁰

Index forms are described as those mathematical forms that are used to write numbers that are too large or small in more convenient forms.

They are also expressed as a number or variable that is raised to an exponents.

Index forms are also referred to as standard forms or scientific notations.

Following the rules of index forms, we have that;

From the information given, we have that;

(n⁵)⁶

Multiply the exponents

n³⁰

Learn about index forms at: https://brainly.com/question/15361818

#SPJ1

Approximately 680 out of the 850 entering students will probably need to take a refresher mathematics course which is calculated using simplified fraction.

We are given that about 8 out of 10 people entering a community college need to take a refresher mathematics course. We need to find out how many of the 850 entering students will probably need this course.

Step 1: Determine the proportion of students who need the refresher course.
The proportion is 8 out of 10, which can be written as a fraction: 8/10.

Step 2: Simplify the fraction.
Divide both the numerator (8) and the denominator (10) by their greatest common divisor, which is 2:
8 ÷ 2 = 4
10 ÷ 2 = 5
So, the simplified fraction is 4/5.

Step 3: Calculate the number of students who need the refresher course.
To find the number of students who probably need the course, multiply the total number of entering students (850) by the simplified fraction (4/5):
850 * (4/5) = (850 * 4) / 5 = 3400 / 5 = 680

Know more about fraction here:

https://brainly.com/question/10354322

#SPJ11

The area of ΔEFG is approximately 6.7 square centimeters.

To find the area of ΔEFG with given sides g = 5.2 cm, e = 5.1 cm, and ∠F = 42°, you can use the formula for the area of a triangle when two sides and the included angle are known. This formula is:

Area = (1/2)ab * sin(C)

In this case, a = g, b = e, and C = ∠F. Plug in the values:

Area = (1/2)(5.2 cm)(5.1 cm) * sin(42°)

Area ≈ 6.675 square centimeters

So, the area of ΔEFG is approximately 6.7 square centimeters to the nearest 10th of a square centimeter.

Learn more about area here: https://brainly.com/question/28470545

#SPJ11

The mean of this distribution is 26.5. The standard deviation is 8.0623. The probability that the number will be exactly 36 is P (x = 36) = 0.0286. The probability that the number will be between 21 and 23 is P (21 < x < 23) = 0.0400. The probability that the number will be larger than 26 is P (x > 26) = 0.2857. P (x > 16 | x < 18) = undefined. The 49th percentile is 29.3700. The minimum for the lower quartile is 19.75.

a. The mean of a uniform distribution is the average of the maximum and minimum values, so in this case, the mean is:

mean = (12 + 41) / 2 = 26.5

Therefore, the mean of this distribution is 26.5.

b. The standard deviation of a uniform distribution is given by the formula:

sd = (b - a) / sqrt(12)

where a and b are the minimum and maximum values of the distribution, respectively. So in this case, the standard deviation is:

sd = (41 - 12) / sqrt(12) = 8.0623

Therefore, the standard deviation of this distribution is 8.0623.

c. Since the distribution is uniform, the probability of getting any specific value between 12 and 41 is the same. Therefore, the probability of getting exactly 36 is:

P(x = 36) = 1 / (41 - 12 + 1) = 0.0286

Rounded to four decimal places, the probability is 0.0286.

d. The probability of getting a number between 21 and 23 is:

P(21 < x < 23) = (23 - 21) / (41 - 12 + 1) = 0.0400

Rounded to four decimal places, the probability is 0.0400.

e. The probability of getting a number larger than 26 is:

P(x > 26) = (41 - 26) / (41 - 12 + 1) = 0.2857

Rounded to four decimal places, the probability is 0.2857.

f. The probability that x is greater than 16, given that it is less than 18, can be calculated using Bayes' theorem:

P(x > 16 | x < 18) = P(x > 16 and x < 18) / P(x < 18)

Since the distribution is uniform, the probability of getting a number between 16 and 18 is:

P(16 < x < 18) = (18 - 16) / (41 - 12 + 1) = 0.0400

The probability of getting a number greater than 16 and less than 18 is zero, so:

P(x > 16 and x < 18) = 0

Therefore:

P(x > 16 | x < 18) = 0 / 0.0400 = undefined

There is no valid answer for this question.

g. To find the 49th percentile, we need to find the number that 49% of the distribution falls below. Since the distribution is uniform, we can calculate this directly as:

49th percentile = 12 + 0.49 * (41 - 12) = 29.37

Rounded to four decimal places, the 49th percentile is 29.3700.

h. The lower quartile (Q1) is the 25th percentile, so we can calculate it as:

Q1 = 12 + 0.25 * (41 - 12) = 19.75

Therefore, the minimum for the lower quartile is 19.75.

Know more about probability here:

https://brainly.com/question/30034780

#SPJ11

The two numbers are 129 and 62, which satisfy the given conditions: their sum is 191 and their difference is 67 .

You are asked to find two numbers whose sum is 191 and whose difference is 67. Let's use the variables x and y to represent these two numbers.

We can establish the following two equations under the given conditions: 1) x + y = 191 2) x - y = 67

Now we can solve this system of linear equations to find the values of x and y.

We can start by adding both equations:

(x + y) + (x - y) = 191 + 67

2x = 258

Then we'll divide by 2 to find the value of x:

x = 129

Now, we can plug x into Equation 1 to find the value of y:

129 + y = 191

y = 191 - 129

y = 62

Learn more about the equation at:

https://brainly.com/question/2081704.

#SPJ11

The velocity of the water flowing through the pipe is approximately 7.83 feet per second. The hydraulic radius of the pipe can be calculated as follows:

R = d/4

where d is the diameter of the pipe. In this case, the diameter is 3 feet, so the hydraulic radius is:

R = 3/4 = 0.75 feet

Now, we can use the given formula to calculate the velocity of the water:

[tex]v =[/tex][tex]1.486/n[/tex] [tex]R^(2/3) S^(1/2)[/tex]

Substituting the given values, we get:

v = 1.486/0.014 (0.75[tex])^(2/3)[/tex] (0.4[tex])^(1/2)[/tex] ≈ 7.83 feet per second

Therefore, the velocity of the water flowing through the pipe is approximately 7.83 feet per second.

Learn more about velocity

https://brainly.com/question/17127206

#SPJ4

The ordered pairs for the data in the table include the following:

In Mathematics and Geometry, an ordered pair is sometimes referred to as a coordinate and it can be defined as a pair of two (2) elements or data points that are commonly written in a fixed order within parentheses as (x, y), which represents the x-coordinate (abscissa) and the y-coordinate (ordinate) on the coordinate plane of any graph.

Based on the table shown in the image attached below, we can reasonably infer and logically deduce that all of the coordinate points or ordered pairs would be located in quadrant 1.

Read more on ordered pair here: brainly.com/question/25462418

#SPJ4

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

To evaluate the limit using L'Hospital's rule, we need to take the derivative of both the numerator and denominator separately until we get a determinate form. We have:

lim (e^x + 2x - 1) / (2x)

Taking the derivative of the numerator:

lim (e^x + 2) / 2

Taking the derivative of the denominator:

lim 2

Since we now have a determinate form, we can evaluate the limit by plugging in the value of x. We get:

(e^x + 2) / 2

As x approaches infinity, e^x also approaches infinity, so the limit diverges to positive infinity. Therefore, the limit does not exist.

Visit here to learn more about L'Hospital's rule brainly.com/question/14105620

#SPJ11

The significance level is the key indicator of whether or not a hypothesis can be supported. (option c)

In statistical analysis, there are several key indicators that are used to determine whether a hypothesis can be supported. One of these indicators is the significance level, which is denoted by the symbol alpha (α).

Another key indicator is the critical value, which is a value that is determined from a statistical distribution and is used to determine whether the observed data is statistically significant.

The test compares the observed frequencies of the categories to the expected frequencies, assuming that there is no association between the variables. The degrees of freedom refer to the number of categories minus one.

Therefore, to answer the original question, option (c)

To know more about hypothesis here

https://brainly.com/question/29576929

#SPJ4

The given inequality is 3x - 12 ≤ -18. To solve for x, we can add 12 to both sides of the inequality to obtain 3x ≤ -6. Then, dividing both sides of the inequality by 3 gives x ≤ -2. Therefore, any value of x less than or equal to -2 will satisfy the inequality.

In solving the inequality, we first used the addition property of inequalities to add 12 to both sides of the inequality. This property states that if a < b, then a + c < b + c, where c is any real number. By adding 12 to both sides, we were able to isolate the variable term on one side of the inequality.

Next, we used the division property of inequalities to divide both sides of the inequality by 3. This property states that if a < b and c > 0, then a/c < b/c. By dividing both sides of the inequality by 3, we were able to solve for x.

Finally, we found that any value of x less than or equal to -2 will satisfy the inequality. This means that the solution set for the inequality is {x | x ≤ -2}. We also verified that x = -2 is a valid solution to the inequality, which confirms our solution.

To know more about inequality refer here:

https://brainly.com/question/30231190#

#SPJ11

Step-by-step explanation:

See image for calculations:

(Note that interior angle + exterior angle = 180 degrees)

   AND  sum of exterior angles = 360     that is where the first formula comes from.

$23,000 is more than the $19,000 needed for tuition and fees for the first two years, the minimum amount the student should deposit in the savings account every month is $300 (option C).

The minimum monthly deposit the student should make in order to save enough money for her first two years of college tuition and fees in four years, we need to calculate how much she would need to have in her savings account at the end of four years.

Since the student estimated she needs $9,500 per year for tuition and fees, she will need $19,000 for her first two years. Since she already has $5,000 in her savings account, she needs to save an additional $14,000 in four years.

Looking at the table, we can see that the account value in five years with a monthly deposit of $200 is $17,000. To find out how much the account value would be in four years, we need to calculate the future value of $17,000 with a 4-year time frame and an annual interest rate of 0%, which gives:

Future value = $17,000 x (1 + 0%)^(4 x 12/12) = $17,000

Since the account value with a $200 monthly deposit is only $17,000 after 5 years, which is not enough to cover the $19,000 needed for tuition and fees for the first two years, the student needs to make a higher monthly deposit.

Looking at the table again, we can see that the account value in five years with a monthly deposit of $300 is $23,000. To find out how much the account value would be in four years, we need to calculate the future value of $23,000 with a 4-year time frame and an annual interest rate of 0%, which gives:

Future value = $23,000 x (1 + 0%)^(4 x 12/12) = $23,000

$23,000 is more than the $19,000 needed for tuition and fees for the first two years, the minimum amount the student should deposit in the savings account every month is $300 (option C).

Learn more about Tuition and fees

brainly.com/question/12221197

#SPJ11

The following table shows the weight of a cat in pounds and the corresponding number of cans of cat food to be given each day.

To complete the table, we need to use the information that the directions on the small cans of cat food say to feed a cat 1 can of food each day for every 4 pounds of body weight.

For example, for a cat weighing 4 pounds, we need to give 1 can of food each day.

For a cat weighing 5 pounds, we need to give more than 1 can but less than 2 cans of food each day.

To find the exact number of cans, we can use the formula:

cans per day = weight in pounds / 4

Substituting the given values, we get:

cans per day = 5 / 4

cans per day = 1.25

Therefore, for a cat weighing 5 pounds, we need to give 1.25 cans of food each day. We can round this to the nearest tenth to get 1.3 cans per day.

Similarly, we can use the formula to complete the rest of the table:

KIT-E-KAT weight in pounds cans per day

4   1

5   1.3

6   1.5

7   1.8

8   2

9   2.3

10  2.5

11   2.8

12  3

13  3.3

14  3.5

15  3.8

Therefore, the completed table shows the weight of a cat in pounds and the corresponding number of cans of cat food to be given each day.

To learn more about the division operation click here :

brainly.com/question/25870256

#SPJ1

After evaluating the conclusion is that one serving of orange juice has 35.7 mg more vitamin C per serving than one serving of cranberry  juice.

According to the provided data , a bottle of orange juice has 750 mg of vitamin C and provides 6 servings. A bottle of cranberry juice has 134 mg of vitamin C and provides 1.5 servings.

Now to evaluate how many milligrams of vitamin C are in 1 serving of each type of juice, we have to  perform division to evaluate the total amount of vitamin C by the number of servings.

For orange juice

750 mg / 6 servings

= 125 mg/serving

For cranberry juice

134 mg / 1.5 servings

= 89.3 mg/serving

To learn more about division

https://brainly.com/question/30340100

#SPJ4

Linda contributed $3,355.56 to social security in 2003.

The Social Security tax is a payroll tax that is deducted from employees' paychecks to help fund the Social Security program, which provides retirement, disability, and survivor benefits to eligible individuals.

The Social Security tax rate is typically 6.2% for employees and employers, and the maximum amount of taxable earnings is determined each year by the Social Security Administration (SSA).

In 2003, the maximum taxable earnings was $87,000. This means that any earnings above $87,000 were not subject to Social Security taxes.

To calculate Linda's contribution to social security in 2003, we will use the given social security tax rate of 6.2% and her income of $54,122.

Convert the tax rate percentage to a decimal by dividing by 100.
6.2% / 100 = 0.062

Multiply Linda's income by the decimal tax rate.
$54,122 * 0.062 = $3,355.56

Linda contributed $3,355.56 to social security in 2003.

Learn more about "percentage": https://brainly.com/question/24877689

#SPJ11

Final Answer:  a. The number of units that should be sold in order to maximize the profit is 7 thousand units.

b. The  maximum profit is approximately $5.51

Conceptual part:   a. In order to find maximum profit we need to differentiate the profit function

[tex]dp/dx = (-3x^2+18x+21)/-x^3+9x^2+21x+1[/tex] = 0

[tex]-3x^2+18x+21=0[/tex]

[tex](x-7) (x+1) = 0[/tex]

as profit can't be negative.

hence x=7.

b. We can determine the maximum profit by substituting x=7 in profit function.

[tex]p(7) = ln(-7^3+9*7+21*7+1)[/tex]

[tex]p(7) = ln(246)[/tex]

p(7) = 5.51

To learn more about maximization  of profit visit: brainly.com/question/30639135

Hashtag:  #SPJ11

Another possible value for j and K is (A) j = 18, k = 2

Note that in inverse variation, one of the variables increases while the other decreases.

From the information given, we have that;

j is inversely related to the cube of k,

This is represented as;

j ∝ 1/k³

Now, find the constant of variation

K = jk³

Substitute the vales

K = 3 × 6³

find the cube value

K = 648

Then, we have that;

j = 648 / 2³ = 81

For option B:

j = 648 / 3³ = 24

For option C:

j = 648 / 2³ = 81

For option D:

j = 648 / 81³ = 0.0008

For option E:

j = 648 / 2³ = 81

Learn about variation at: https://brainly.com/question/6499629

#SPJ1

The total surplus of both towns together is represented by the polynomial [tex]3x^2 + 600x + 80,000.[/tex]

To find the total surplus of both towns together, we need to add the budget surplus of Alphaville and Betaville.

The budget surplus of Alphaville is represented by the polynomial [tex]2x^2 + 700x.[/tex]

The budget surplus of Betaville is represented by the polynomial x^2 - 100x + 80,000.

Therefore, the expression that represents the total surplus of both towns together is:

[tex](2x^2 + 700x) + (x^2 - 100x + 80,000)[/tex]

Simplifying this expression, we get:

[tex]3x^2 + 600x + 80,000[/tex]

Learn mora about polynomial,

brainly.com/question/20121808

#SPJ11

The minimum amount of glass needed to construct the Louvre pyramid is approximately 3133 square meters.

The surface area of a square base pyramid can be calculated by adding the area of the base to the sum of the areas of the four triangular faces.

The area of the square base is simply the width of the base squared:

Area_base = (35 m)^2 = 1225 square meters

The area of each triangular face can be calculated using the formula:

Area_triangle = (1/2) * base * height

For the Louvre pyramid, the base of each triangular face is equal to the width of the base of the pyramid, which is 35 meters. The height of each triangular face can be found using the Pythagorean theorem:

[tex]height^2 = (1/2 * width)^2 + height^2[/tex]

[tex]height = sqrt((1/2 * 35 m)^2 + (20.6 m)^2)[/tex]

height = 29.2 m

Therefore, the area of each triangular face is:

Area_triangle = (1/2) * (35 m) * (29.2 m) = 508.5 square meters

The total surface area of the pyramid is:

Surface_area = Area_base + 4 * Area_triangle

Surface_area = 1225 + 4 * 508.5

Surface_area = 3133 square meters

Since the pyramid is made of glass, we need to calculate the minimum amount of glass needed to construct it. Assuming the glass is thin and flat, we can simply use the surface area of the pyramid to estimate the amount of glass needed.

Learn more about Pythagorean theorem:

brainly.com/question/28361847

#SPJ11

Step-by-step explanation:

since both spins are independent events (one does not have any impact on the other), the sequence does not matter. the probability of first blue and then gray is the same as first gray and then blue.

it is the probability of getting 1 gray and 1 blue result.

a probability is always the ratio

desired cases / totally possible cases.

since 6/10 of the area of the spine are gray, and 4/10 of the area are blue, the probability for any single spin to result in gray is 6/10 = 3/5 = 0.6.

and the probability to result in blue is 4/10 = 2/5 = 0.4

the probability to get 1 gray and 1 blue is then the product of both probabilities :

0.6 × 0.4 = 0.24

it is like rolling a die twice and asking for e.g. two 6s or any other combination of 2 specific numbers. that probability is

1/6 × 1/6 = 1/36

FYI :

the probability of getting gray twice is then

0.6 × 0.6 = 0.36

the probability of getting blue twice is

0.4 × 0.4 = 0.16

as mentioned to get gray first and blue second is

0.6 × 0.4 = 0.24

to get blue first and gray second

0.4 × 0.6 = 0.24

and these are all the possible results you can get in 2 spins.

therefore, the probability for any of them is

0.36 + 0.16 + 0.24 + 0.24 = 1

Answer:

x = 13

Step-by-step explanation:

We Know

The sum of angles of a triangle must add up to 180°

We know 2 angles, one is 60° and the other is 90°

Solve for x.

Let's solve

3x - 9 + 60 + 90 = 180

3x + 141 = 180

3x = 39

x = 13

The difference between the radii of the two circular tracks is 15ft

The total length of track 1 is 220ft, which means that the circumference of the circle is 220ft

we find the diameter of each track.

The circumference of a circle can be found  using the formula

P = πd

d = P /π

track 1, we have

d1 = P1 / π

d1 = 220 / π

d1 = 70.03 ft.

track 2, we have

d2 = P2 / π

d2 = 126 / π

d2 = 40.11 ft.

radius of tract 1  = 35.01 ft

radius of track 2 = 20.05 ft

The difference between the two track radius is

∆r = r1 - r2

∆r = 110 / π - 63 / π

∆r = (110 - 63) / π

∆r = 47 / π

∆r = 14.96 ft.

∆r =  15 ft

In conclusion, difference between the radii of the two circular tracks is  15ft

Learn more about circumference of a circle  at:

https://brainly.com/question/18571680

#SPJ1

#complete question:

What is the difference between the radii of the two circular tracks? Answer the questions to find out.

1. Are the distances of 220 feet and 126 feet the radii, diameters, or circumferences of the two circles?

Answer:

17.2 cm²

Step-by-step explanation:

Alr let me try

The angle is 1.2 you got it right. The rest is in the pics

Answer: A(shaded)=17.15 cm²

Step-by-step explanation:

What you did so far is correct.

Given:

r=5

s=6

Solve for Ф  angle:

s=[tex]\frac{part circle}{wholecircle} 2\pi r[/tex]         This way help you find the portion/percent you want

6=(Ф/360) (2[tex]\pi[/tex]5)       >solve for Ф  Divide by (2[tex]\pi[/tex]5) and multiply by 360

Ф=68.75

Solve for pie/sector

Now that you have the angle,  you can use the same concept for area

Area of sector = [tex]\frac{part circle}{wholecircle} \pi r^{2}[/tex]

Area of sector = [tex]\frac{68.75}{360} \pi 5^{2}[/tex]

Area of sector = 15.0 cm²

Now let find y so we can plug into area of triangle

use tan Ф = opposite/adjacent

tan 68.75 = y/5

y=5 * tan 68.75

y=12.86 cm

Area of triangle = 1/2 b h          b=y=12.86     h =5

Area of triangle = 1/2* 12.86*5

Area of triangle = 32.15 cm²

Now subtract area of sector from triangle

A(shaded)=A(triangle)-A(sector)

A(shaded)=32.15- 15.0

A(shaded)=17.15 cm²

Based on the linear regression formula y = 1.3485x + 840.51, you can calculate the monthly rental price (y) for a one-bedroom apartment by plugging in the square footage (x) of the apartment.

The linear regression formula for the 15 similar one-bedroom apartments is y = 1.3485x + 840.51, where x represents the square footage and y represents the monthly rental price. This means that for every square foot increase in the apartment size, the monthly rental price is predicted to increase by $1.35.

The y-intercept of the formula is $840.51, which represents the predicted monthly rental price for an apartment with 0 square footage (this is not possible in reality, but is used in the formula for mathematical purposes). To get the rental price, round your answer to the nearest whole number. For example, if an apartment has 500 square feet, you'd calculate: y = 1.3485(500) + 840.51 ≈ 1344.76, which rounds to $1,345 as the monthly rental price.

More on linear regression: https://brainly.com/question/29665935

#SPJ11