If a beaker contains 15.6 moles of water, then it represents 9.39 × 10²⁴ molecules of water, 0.317 moles of PbO contains approximately 1.91 × 10²³ formula units of PbO, 6.01 × 10²⁵ atoms of cesium is equivalent to 99.7 moles of cesium, and 3.54 × 10²¹ molecules of sulfur dioxide represents approximately 5.88 × 10⁻³ moles of sulfur dioxide.
If a beaker contains 15.6 moles of water (H₂O), we can calculate the number of molecules using Avogadro's number, which is approximately 6.022 × 10²³ molecules/mol.
Number of molecules = Number of moles × Avogadro's number
Number of molecules = 15.6 moles × 6.022 × 10²³ molecules/mol
Let's plug in the value and calculate;
Number of molecules = 15.6 moles × 6.022 × 10²³ molecules/mol
Number of molecules ≈ 9.39 × 10²⁴ molecules
So, 15.6 moles of water represents approximately 9.39 × 10²⁴ molecules of water.
The number of formula units of PbO (lead(II) oxide) in 0.317 moles of PbO can be calculated using Avogadro's number, which is approximately 6.022 × 10²³ formula units/mol.
Number of formula units = Number of moles × Avogadro's number
Number of formula units = 0.317 moles × 6.022 × 10²³ formula units/mol
Let's plug in the value and calculate;
Number of formula units = 0.317 moles × 6.022 × 10²³ formula units/mol
Number of formula units ≈ 1.91 × 10²³ formula units
The number of moles of cesium (Cs) equivalent to 6.01 × 10²⁵ atoms of cesium can be calculated using Avogadro's number, which is approximately 6.022 × 10²³ atoms/mol.
Number of moles = Number of atoms / Avogadro's number
Number of moles = 6.01 × 10²⁵ atoms / 6.022 × 10²³ atoms/mol
Let's plug in the value and calculate;
Number of moles = 6.01 × 10²⁵ atoms / 6.022 × 10²³ atoms/mol
Number of moles ≈ 99.7 moles
So, 6.01 × 10²⁵ atoms of cesium is equivalent to approximately 99.7 moles of cesium.
The number of moles represented by 3.54 × 10²¹ molecules of sulfur dioxide (SO₂) can be calculated using Avogadro's number, which is approximately 6.022 × 10²³ molecules/mol.
Number of moles = Number of molecules / Avogadro's number
Number of moles = 3.54 × 10²¹ molecules / 6.022 × 10²³ molecules/mol
Let's plug in the values and calculate;
Number of moles = 3.54 × 10²¹ / 6.022 × 10²³
Number of moles ≈ 5.88 × 10⁻³ moles
So, 3.54 × 10²¹ molecules of sulfur dioxide represents approximately 5.88 × 10⁻³ moles of sulfur dioxide.
To know more about formula units here
https://brainly.com/question/23413257
#SPJ1
13. Which of the following chemical reactions is an oxidation-reduction reaction?
A. C02 + H20 - H2C03
B. Pb(N03)2 + 2HC1- PbCh + 2HN03
C. H2S04 + Ba(OH)2 - BaS04 + 2H20
D. NH3 + HCl - NH4CI
E. Mg + CO2 - MgO + CO
Mg + CO[tex]_2[/tex]→ MgO + CO is an oxidation-reduction reaction. Therefore, the correct option is option E among all the given options.
Redox reactions involve oxidation-reduction chemical processes in which the oxidation states of the reactants change. Redox is a shortened version of reduction-oxidation. Two distinct processes—a reduction process or an oxidation process—can be used to describe all redox reactions.
In redox and oxidation-reduction processes, the oxidation or reduction reactions usually take place concurrently. In a chemical reaction, the material that is being reduced is referred to as the reducing agent, and the substance that is being oxidised is the oxidising agent. Mg + CO[tex]_2[/tex]→ MgO + CO is an oxidation-reduction reaction.
Therefore, the correct option is option E.
To know more about oxidation-reduction reaction, here:
https://brainly.com/question/13559667
#SPJ1
Can this be solved Chemistry balancing equation GIVEN K
find [N₂O₄] given K = 0.028, [NO₂] = 0.0.042 M N₂O₄ ← →2 NO₂
The concentration of N₂O₄ is 0.514 M.
The equilibrium constant (K) is a ratio of the concentrations of products to reactants at equilibrium. In this problem, the equilibrium constant (K) is given as 0.028 for the reaction N₂O₄ ← → 2NO₂.
To find the concentration of N₂O₄, we can use the expression for K and the initial concentration of NO₂. Since there is no initial concentration of N₂O₄ given, we assume that it is x M.
Using the equilibrium constant (K) and the initial concentration of one of the species.
[N₂O₄] = √(K/[NO₂])
[N₂O₄] = √(0.028/0.042)
[N₂O₄] = 0.514 M
Therefore, the concentration of N₂O₄ is 0.514 M.
To know more about the Equation, here
https://brainly.com/question/2524060
#SPJ1
What is the best conclusion that Tara should make about the commercial?
The best inference Tara can draw about the commercial is the fact that it is making pseudoscientific claims based on opinions rather than scientific evidence, according to the message at the bottom of the screen.
The claims claimed in the commercial are not supported by scientific data and may be exaggerated or inaccurate because the pill has not been examined by physicians and has not been put through rigorous testing. Therefore, before making any judgements regarding the use of the product, it is crucial to exercise caution and skepticism towards the assertions made in such advertising and to look for trustworthy sources of information.
Therefore, the correct option is D.
Learn more about commercial, here:
https://brainly.com/question/20913121
#SPJ1
Your question is incomplete, most probably the complete question is:
Tara sees a commercial for a brand of pills that promise to boost energy and help people perform better in work and school. As people in the commercial talk about how much better they feel when taking the pill, Tara notices a message on the bottom of the screen that reads, "This pill is not approved by doctors and has not been tested in controlled experiments." What is the best conclusion that Tara should make about the commercial?
It is making scientific claims based on subjective observations. It is making scientific claims based on opinions instead of pseudoscientific facts. It is making pseudoscientific claims based on objective observations. It is making pseudoscientific claims based on opinions instead of scientific facts.A steel bar and a copper bar have the same length of 1.500 m at -12.00 ∘C.
What is the difference in the lengths of the two bars at 41.0 ∘C ?
Who can be my tutor for chemistry?
A Tutor is responsible for helping students to learn and understand the new concepts and complete assignments. They prepare lessons by studying lesson plans, reviewing textbooks in detail.
The role of a teacher is to teach a certain subject to the students according to the school syllabus whereas tutors respond to a child's individual needs by filling gaps. It is one who gives private instruction.
A Tutor for chemistry can be a person with good subject knowledge of chemistry. Generally the person who have taken MSC in chemistry or Mphil can be the apt tutor. They should got these degrees from a recognized university.
To know more about Tutor, visit;
https://brainly.com/question/13088995
#SPJ1
What is the vapor pressure of SiCl4
in mmHg
at 33.0 ∘C
? The vapor pressure of SiCl4
is 100 mmHg
at 5.4 ∘C
, and ΔHvap
= 30.2 kJ/mol
.
The vapor pressure of the SiCl₄ in the mmHg at the 33.0 °C is the 312 mmHg.
The Clausius - Clapeyron equation is as :
ln ( P₂ / P₁ ) = ΔHvap / R ( 1 / T₁ - 1 / T₂ )
P₂ = P₁eˣ
Where,
The temperature, T₁ = 5.4 °C = 278.55 K
The temperature, T₂ = 33.0 °C= 306 K
The pressure, P₁ = 100 mmHg
ΔHvap is the heat of the vaporization = 30.2 kJ /mol = 30200 J/mol
The gas constant, R = 8.314 J / mol K
x = ΔHvap / R ( 1 / T₁ - 1 / T₂ )
x = 30200 / 8.314 ( 1/ 278.55 - 1/ 306 )
x = 1.05
P₂ = 100 [tex]e^{1.05}[/tex]
P₂ = 312 mmHg
The vapor pressure of the SiCl₄ is 312 mmHg.
To learn more about vapor pressure here
https://brainly.com/question/29659130
#SPJ1
5. If a beaker contains 15.6 moles of water, H2 O, how many molecules does this represent?
6. How many formula units of PbO are contained in 0.317 moles of lead (II) oxide?
7. 6.01 x 10 25 atoms of cesium, Cs, are equivalent to how many moles of cesium?
8. Determine the number of moles that are represented by 3.54 x 10 21 molecules of sulfur dioxide, SO2 .
If a beaker contains 15.6 moles of water, H[tex]_2[/tex] O, 9.3×10²⁴ are the number of molecules this represent.
The smallest recognisable unit into that a pure substance may be divided while retaining its composition & chemical properties is a molecule, which is a collection of more than one atom.
Until parts made up of individual molecules are reached, splitting of a sample of an item smaller progressively smaller parts does not result in a change regarding its composition as well as its chemical properties.
5.number of molecules= 15.6 × 6.022×10²³
=9.3×10²⁴
6. .number of molecules=0.317 × 6.022×10²³
=1.89×10²³
7. number of moles =6.01 x 10 25/ 6.022×10²³
= 100 moles
8. number of moles =3.54 x 10²¹/ 6.022×10²³
= 0.005moles
To know more about molecules, here:
https://brainly.com/question/19922822
#SPJ1
Need help with this please it’s due today
Write agree or disagree next to each statement. Explain why you agree or why you disagree
1. Metal atoms don’t have full vallance electron shells, so they try to gain electrons to fill their outer shell.
2. When atoms join together,the bond is either covalent or ionic
3. Oxygen atoms bond together,but this is not because of an atomic force.
4. Covalent bonds happen when an electron moves back and forth between two atoms
5. Ionic bonds occur when an electron is transferred from one atom to another
6. When hydrogen joins with oxygen,a hydrogen bond has been formed.
Answer:
The statements 1, 2, 5 are correct, while the statements 3, 4, 6 are incorrect. It's important to have a clear understanding of the different types of chemical bonds and how they are formed in order to understand the properties and behavior of molecules and compounds.
Explanation:
1. Agree: Metal atoms have partially filled valence shells, which makes them more likely to lose electrons than to gain them. This loss of electrons creates a positive ion with a full valence shell, which is more stable than the original atom.
2. Agree: Chemical bonds are either covalent or ionic. Covalent bonds involve the sharing of electrons between atoms, while ionic bonds involve the transfer of electrons from one atom to another.
3. Disagree: Oxygen atoms bond together due to a strong atomic force called a covalent bond. This occurs when the two oxygen atoms share electrons to form a stable molecule of O2.
4. Disagree: Covalent bonds occur when electrons are shared between atoms, but they do not "move back and forth" between the atoms. Rather, the electrons are shared between the atoms to create a stable molecule.
5. Agree: Ionic bonds occur when one atom transfers an electron to another atom. The transfer of the electron creates two ions with opposite charges, which are then attracted to each other.
6. Disagree: A hydrogen bond is a weak electrostatic attraction between a hydrogen atom and an electronegative atom such as oxygen or nitrogen. When hydrogen joins with oxygen, a covalent bond is formed, not a hydrogen bond.
Metal atoms try to gain electrons; Covalent or ionic bonds form when atoms join; Oxygen atoms bond via atomic force.
Explanation:1. Agree - Metal atoms do not have full valence electron shells, so they tend to gain electrons to achieve stability. This process is known as electron transfer or ionic bonding.
2. Agree - when atoms join together, the resulting bond is either covalent or ionic. Covalent bonds involve the sharing of electrons, while ionic bonds involve the transfer of electrons from one atom to another.
3. Disagree - Oxygen atoms bond together through a force known as the atomic force. This force arises due to the different electronegativities of the oxygen atoms, leading to the formation of a covalent bond.
4. Disagree - Covalent bonds occur when electrons are shared between atoms, rather than moving back and forth between them.
5. Agree - Ionic bonds occur when one atom transfers an electron to another atom.
6. Disagree - When hydrogen joins with oxygen, a covalent bond is formed, not a hydrogen bond. Hydrogen bonds occur when a hydrogen atom is attracted to an electronegative atom, such as oxygen, in a different molecule.
Learn more about Chemical bonding here:https://brainly.com/question/33579397
#SPJ2
please provide explanation!! thank you in advance!!
The correct rate law of the reaction from the experimental data is k[NO]^2 [O2]. Option D
What is the rate of reaction?The rate of reaction is usually expressed in terms of the amount of reactant consumed or product formed per unit time, and is typically measured in units of moles per liter per second (mol/L/s) or similar units.
We have that;
For NO;
3.4 * 10^-5/8.4 * 10^-6 = 2 * 10^-4/ 2 * 10^-4
4 = 2^n
n = 2
For O2;
8.4 * 10^-6/2.8 * 10^-6 = 3 * 10^-4/ 1 * 10^-4
3 = 3^n
n = 1
Thus the rate law of the reaction is;
Rate = k[NO]^2 [O2]
Learn more about rate of reaction:https://brainly.com/question/8592296
#SPJ1
you made 95.41 gram of carbon monoxide, how many moles of carbon did you start with?
Answer:
The balanced equation for the formation of carbon monoxide from carbon is:
C(s) + CO2(g) -> 2CO(g)
The molar mass of CO is 28 g/mol.
First, we need to calculate the number of moles of CO produced:
moles CO = mass of CO / molar mass of CO
moles CO = 95.41 g / 28 g/mol
moles CO = 3.412 mol
According to the balanced equation, 1 mole of carbon creates 2 moles of CO. As a result, the amount of carbon moles is:
moles C = moles CO / 2
moles C = 3.412 mol / 2
moles C = 1.706 mol
So, the initial amount of carbon was 1.706 moles.
Equation: 2H2 + O2 —> 2H2O
How many moles of hydrogen will be required to react with 2.1g of oxygen gas
(0₂)?
HELP
Write the products formed in the following acid-base reaction.
NaOH + HCl →
Then, describe the reaction using the terms strong acid, strong base, weak acid, weak base, salt, conjugate acid, conjugate base, and neutralization, as appropriate.
Answer in complete sentences.
The products formed in the acid-base reaction between NaOH and HCl are NaCl (sodium chloride) and H₂O (water).
NaOH + HCl → NaCl + H₂O
In this reaction, NaOH is a strong base, and HCl is a strong acid. A strong base is one that completely dissociates in water to form hydroxide ions (OH⁻) while a strong acid is one that completely dissociates in water to form hydrogen ions (H⁺).
NaOH + H₂O → Na⁺ + OH⁻
HCl + H₂O → H⁺ + Cl⁻
When NaOH is added to HCl, the hydroxide ions (OH⁻) from the NaOH react with the hydrogen ions (H⁺) from the HCl to form water (H2O). The remaining ions, Na⁺ and Cl⁻, combine to form sodium chloride (NaCl), which is a salt.
Na⁺ + Cl⁻ → NaCl
The reactants in this reaction are a strong base (NaOH) and a strong acid (HCl), and the products are a salt (NaCl) and water (H₂O). This reaction is an example of neutralization, which is a reaction between an acid and a base that produces a salt and water. The Na⁺ ion is the conjugate acid of the strong base NaOH, while the Cl⁻ ion is the conjugate base of the strong acid HCl
To know more about the Conjugate base, here
https://brainly.com/question/30357375
#SPJ1
How many grams of KBr are dissolved in 72.7 mL of a 0.998 M solution?
You dissolve 123g KBr into 689g of water. Calculate the mass percent.
You dissolve 3 moles KBr into 46 moles of water. Calculate the mass percent
8.63 grams of KBr are dissolved in 72.7 mL of a 0.998 M solution.
To answer first we need to calculate the molar mass of this molecule (KBr):
For this we go to the periodic table and check the molar weight of potassium and bromine:
K: 39.098 g/mol
Br: 79.904 g/mol
So the molar mass of KBr is
= 39.098 g/mol + 79.904 g/mol
=119 g/mol
Now, we know that the solution is 0.998 M, this means that in 1000 ml there are 0.998 moles of KBr. So we calculate the number of moles in 72.7ml:
number of moles of KBr
= 72.7 ml × 0.998 molL⁻¹/ 1000 mlL⁻¹
=0.0725 moles
Now we use the molar mass to calculate the mass in grams in the sample:
mass of KBr
= 0.0725 moles ₓ 119 g/mol
=8.6275 g
≈8.63 g
To know more about molarity here
brainly.com/question/29053672
#SPJ1
Which of the following is a main difference in cell structure between an onion cell and a human cheek cell? OA. There is no difference between an onion cell and a human cheek cell. OB. An onion cell has a cell wall. OC. An onion cell contains one nucleus, whereas a human cheek cell contains two nuclei. OD. A human cheek cell contains chloroplasts.
Answer: An onion cell has a cell wall.
Explanation:
One of the main differences in cell structure between an onion cell and a human cheek cell is that an onion cell has a cell wall, while a human cheek cell does not. The cell wall of the onion cell provides it with additional support and protection, which is not required by animal cells, such as the human cheek cell.
3 Ca + 2 P→ Ca3P₂
Identify the limiting reactant (LR), excess reactant (ER), and theoretical yield (TY), in moles, of Ca³P₂
when 17.0 grams Ca reacts with 18.0 grams P.
To identify the limiting reactant, excess reactant, and theoretical yield, we first need to determine the amount of each reactant in moles.
Using the molar masses of Ca and P:
Number of moles of Ca = 17.0 g / 40.08 g/mol = 0.424 mol
Number of moles of P = 18.0 g / 30.97 g/mol = 0.581 mol
Next, we need to determine the stoichiometric ratio of the reactants. From the balanced chemical equation, we see that the ratio of Ca to P is 3:2.
3 Ca + 2 P → Ca3P2
To use the stoichiometric ratio to determine the limiting reactant, we need to compare the actual ratio of the reactants to the stoichiometric ratio.
Actual ratio of Ca to P = (0.424 mol Ca) / (0.581 mol P) ≈ 0.73
Stoichiometric ratio of Ca to P = 3/2 = 1.5
Since the actual ratio is greater than the stoichiometric ratio, Ca is the excess reactant and P is the limiting reactant.
To find the theoretical yield of Ca3P2, we need to use the stoichiometric ratio to determine how many moles of Ca3P2 can be produced from the limiting reactant (P).
From the balanced chemical equation, we see that 2 moles of P react with 3 moles of Ca to produce 1 mole of Ca3P2.
So, the number of moles of Ca3P2 that can be produced from 0.581 mol of P is:
(0.581 mol P) × (1 mol Ca3P2 / 2 mol P) = 0.2905 mol Ca3P2
Therefore, the theoretical yield of Ca3P2 is 0.2905 mol.
Drag each phrase to show weather it causes water pollution or is an effect of water pollution. (2 points)
Choices:
Algal blooms
Overgrazing
Use of chemical fertilizers to enhance production
High concentration of nitrogen in water
Algal blooms and high concentrations of nitrogen in water are effects of water pollution. Overgrazing and the use of chemical fertilizers cause water pollution.
Water pollutionAlgal blooms are an effect of water pollution. They occur when there is an excessive amount of nutrients, particularly nitrogen and phosphorus, in the water due to pollution. The overgrowth of algae depletes the oxygen levels in the water, which can harm fish and other aquatic animals.
Overgrazing can cause water pollution by increasing the sedimentation rate of waterways. This sedimentation can carry nutrients, bacteria, and other pollutants into the water, which can degrade water quality and cause harm to aquatic life.
The use of chemical fertilizers to enhance production is a cause of water pollution. When fertilizer is overused, it can leach into waterways and cause nutrient pollution, which can lead to algal blooms and other forms of water pollution.
High concentrations of nitrogen in water are often an effect of water pollution. This can be caused by the overuse of fertilizers or the discharge of untreated sewage into waterways. High nitrogen levels can cause algal blooms, which can lead to oxygen depletion and harm aquatic life.
More on water pollution can be found here: https://brainly.com/question/19920929
#SPJ1
Answer:
Cause:
: : use of chemical fertilizers to enhance production
: : overgrazing
Effect:
: : high concentration of nitrogen in water
: : algal blooms
Hope this helps ;)
The concentration of iodide ions in a saturated solution of lead (II) iodide is ________ M. The solubility product constant of PbI2 is 1.4 x 10-8.
The concentration of iodide ions in a saturated solution of lead (II) iodide is 3.03 x 10⁻³ M. The solubility product constant of PbI₂ is 1.4 x 10-8.
The solubility product constant, which is denoted by Ksp is defined as the equilibrium constant for a solid substance which dissolves in an aqueous solution.
when PbI₂ dissolves, it dissociates as follows
PbI₂ --> Pb²⁺ + 2I⁻
Molar solubility is the number of moles of salt that can be dissolved in 1 L of solution
If molar solubility of PbI₂ is x , then molar solubility of Pb²⁺ is x and I⁻ is 2x
ksp is solubility product constant.
ksp = [Pb²⁺][I⁻]²
ksp = [x][2x]²
ksp = 4x³
4x³ = 1.4 x 10⁻⁸
x³ = 0.35 x 10⁻⁸
x = 1.51 x 10⁻³ M
since molar solubility of I⁻ is 2x ,
then molar solubility of I⁻ or concentration of iodide ions is 3.03 x 10⁻³ M
To know more about solubility product here
https://brainly.com/question/17081992
#SPJ1
If 5 moles of Na2SO4 react, how many moles of NaNO3 can be produced
The concept stoichiometry is used here to determine the moles of NaNO₃ produced. Chemical stoichiometry refers to the quantitative study of the reactants and products involved in a chemical reaction. Here the moles of NaNO₃ is
Stoichiometry is an important concept in chemistry which helps us to use the balanced chemical equation to find out the amounts of reactants and products. Here we make use of ratios in the balanced equation.
The balanced equation is:
Co(NO₃)₂ + Na₂SO₄ → 2 NaNO₃ + CoSO₄
1 mole of Na₂SO₄ gives 2 moles of NaNO₃.
So 5 moles of Na₂SO₄ gives: 2 NaNO₃ × 5 mole Na₂SO₄ / 1 mole Na₂SO₄ = 10 mole NaNO₃
To know more about Stoichiometry, visit;
https://brainly.com/question/10715765
#SPJ1
Part E Why does the car stop? Where did the energy go?
When the moving car brakes to the stop the kinetic energy of car will be converted to the heat energy.
The mechanical brake will be applies to the friction force and it convert the kinetic energy of the car into the thermal energy that which then dissipates on atmosphere. The process of the braking will follow the principle of the conservation of the energy.
The conservation of the energy is the principle, that is expressed in its the most general form, and it is the first law of the thermodynamics. The first law of thermodynamics explains that "the energy of the universe remains the same."
To learn more about thermodynamics here
https://brainly.com/question/31303013
#SPJ1
This question is incomplete, the complete question is :
A car in motion has kinetic energy. A moving car is suddenly stopped. Why does the car stop? Where did the energy go?
During the titration, a student pulls out the pH electrode from the titration beaker several times (with about 0.25 mL of solution on it each time) and rinses it off with DI water into a waste container. Will this affect the measured equivalent mass? If so, will the equivalent mass come out higher or lower?
The student pulling out the pH electrode from the titration beaker and rinsing it off with DI water into a waste container several times during the titration will not significantly affect the measured equivalent mass.
This is because the equivalent mass of a substance is determined by the stoichiometry of the reaction, which is not influenced by the pH electrode or the rinsing process. However, it is important to note that if the student is rinsing the electrode with a significant amount of water, it could dilute the solution and affect the accuracy of the titration. Therefore, it is recommended to use a minimal amount of water during the rinsing process to minimize any potential dilution effect.
To know more about titration, here
brainly.com/question/31271061
#SPJ1
A teacher has given a lab student a white chemical sample and asks her to confirm that it contains 33.4 g sodium hydroxide (NaOH). If the teacher provides the amount in formula unitswhich value is correct?
A. 40.0 g
B. 46.78
C. 5.03 x 10^23
D. 7.03 x 10^24
The amount in, formula unit. of 33.4 g sodium hydroxide is 5.03 x [tex]10^{23[/tex] . Option C.
Formula unitsIn order to calculate the mass of NaOH from formula units, first, we need to know the molar mass of NaOH, which is 40 g/mol1.
The formula units are related to moles by Avogadro’s number which is 6.022 x 10^23 formula units per mole.
Therefore, we can calculate the mass of NaOH as follows:
33.4 g NaOH = (33.4 g NaOH / 40) x (6.022 x 10^23) = 5.03 x [tex]10^{23[/tex] formula units.
In other words, there are 5.03 x [tex]10^{23[/tex] formula units in 33.4 g sodium hydroxide.
More on formula units can be found here: https://brainly.com/question/21494857
#SPJ1
Suppose the galvanic cell sketched below is powered by the following reaction: Pb(s)+Pd(NO3) (aq) - Pb(NO3) (aq)+Pd(s) E1 E2 S1 S2 Write a balanced equation for the half-reaction that happens at the cathode of this cell. 0-0 0 09 Write a balanced equation for the half-reaction 0 that happens at the anode of this cell. 0,0,... e Of what substance is E1 made? X ? Of what substance is E2 made? What are the chemical species in solution S1? 0 What are the chemical species in solution $2?
The substance E₁ is made of lead (Pb), and electrode E₂ is made of palladium (Pd) and the species in solution S₁ is Pb(NO₃)₂(aq), while the species in solution S₂ is Pd(NO₃)₂(aq).
The galvanic cell given in the question can be represented as;
Pb(s) | Pb(NO₃)₂(aq) || Pd(NO₃)₂(aq) | Pd(s)
where '|' represents a phase boundary, and '||' represents a salt bridge or porous disk separating the two half-cells.
The anode is the electrode where oxidation occurs, while the cathode is the electrode where reduction occurs.
To write the balanced equation for the half-reaction that occurs at the cathode, we need to identify the reduction half-reaction. Looking at the cell notation, we can see that Pd(NO₃)₂(aq) is being reduced to Pd(s), so the reduction half-reaction can be written as;
Pd²⁺(aq) + 2 e⁻ → Pd(s)
To write the balanced equation for the half-reaction that occurs at the anode, we need to identify the oxidation half-reaction. The anode is where the Pb(s) is oxidized to Pb²⁺(aq). The balanced oxidation half-reaction is;
Pb(s) → Pb²⁺(aq) + 2 e⁻
The species E₁ and E₂ refer to the electrodes at the anode and cathode, respectively. The electrode E₁ is made of lead (Pb), and electrode E₂ is made of palladium (Pd).
Therefore, the species in solution S₁ is Pb(NO₃)₂(aq), while the species in solution S₂ is Pd(NO₃)₂(aq).
To know more about galvanic cell here
https://brainly.com/question/13031093
#SPJ1
If you have an 8.53 mg sample of phosphorus oxychloride and it contains 1.72 mg of phosphorus, what is the percent composition of the phosphorus in the compound?
If you have an 8.53 mg sample of phosphorus oxychloride and it contains 1.72 mg of phosphorus, 20.6% is the percent composition of the phosphorus in the compound.
The ratio of each element's amount to the sum of all the individual components present in the compound, multiplied by 100, is what determines any compound's percentage composition. Here, we quantify the amount of the constituents in the solution in terms of grammes.
Any compound's percent composition expresses its makeup in terms of all the components that are present. The chemical analysis reveals the relevance of this composition calculation.
percent composition = (1.72/8.53 )× 100
= 20.6%
To know more about percent composition, here:
https://brainly.com/question/17505281
#SPJ1
Find the ions in the periodic table that have an electron configuration of nd8 (n = 3, 4, 5...). Check all that apply. Find the ions in the periodic table that have an electron configuration of (n = 3, 4, 5...).Check all that apply. Ag3+ Gd3+ Cr6+ Ni2+ P3+ Pt2+
The correct ions that have the quoted electron configuration would be [tex]Ag^{3+[/tex], [tex]Gd^{3+[/tex], [tex]Cr^{6+[/tex], [tex]Ni^{2+[/tex], and [tex]Pt^{2+[/tex].
Ions and electronic configurationsThe electron configuration (n = 3, 4, 5, ...) corresponds to the elements in the d-block and f-block of the periodic table. Therefore, the ions with this electron configuration are:
Ag3+ (silver ion): [Kr] 4d^9Gd3+ (gadolinium ion): [Xe] 4f^7Cr6+ (chromium VI ion): [Ar] 3d^0Ni2+ (nickel ion): [Ar] 3d^8Pt2+ (platinum ion): [Xe] 4f^14 5d^8P3+ (phosphorus ion) does not have an electron configuration of (n = 3, 4, 5, ...) as it is a p-block element with the electron configuration [Ne] 3s^2 3p^3.
Therefore, the correct ions that have this electron configuration are [tex]Ag^{3+[/tex], [tex]Gd^{3+[/tex], [tex]Cr^{6+[/tex], [tex]Ni^{2+[/tex], and [tex]Pt^{2+[/tex].
More on electron configurations can be found here: https://brainly.com/question/29757010
#SPJ1
Neutralization is a type of chemical reaction in which an acid and a base react with each other to form water and a salt.
Calculate the % yield of a reaction that combined 28.0 grams of sodium hydroxide with 125.0 mL of 3.10 M solution of sulfuric acid hat produced 24.5 g of Na2SO4 in the laboratory.
Balanced equation:
2 NaOH + H₂SO4 → Na₂SO4 + 2 H₂O
The percent yield of the reaction is 45.44%
Percentage yield is basically,
[tex]\rm Percent\ yield\ = \frac{actual\ yield}{theoretical\ yield} \times 100[/tex]
2 NaOH + H₂SO₄ → Na₂SO₄ + 2 H₂O
To calculate the theoretical yield, consider the stoichiometry of the reaction.
2 moles of NaOH reacts with 1 mole of H₂SO₄ to give 1 mole of Na₂SO₄ and 2 moles of H₂O. The mole ratio of H₂SO₄ and Na₂SO₄ is 1:1
For this mole ratio to be useful, convert the given concentration of H₂SO₄ into moles.
[tex]\rm Molarity\ =\ \frac{No.\ of\ moles}{Volume\ of\ solution (L)}[/tex]
[tex]\rm 3.10\ =\ \frac{No.\ of\ moles}{0.125}[/tex]
[tex]\rm No.\ of\ moles\ =\ 3.10 \times 0.125\[/tex]
[tex]=\ 0.38[/tex]
Since, mole ratio of H₂SO₄ and Na₂SO₄ is 1:1
Amount of Na₂SO₄ formed would be also 0.38 mol
Convert this amount in moles to amount in grams
[tex]\rm No.\ of\ moles\ =\ \frac{Mass\ formed\ }{Molecular\ mass}[/tex]
[tex]\rm Mass\ formed\ =\ No.\ of\ moles\times molecular\ mass[/tex]
[tex]\rm =\ 0.38\times 142.04[/tex]
[tex]\rm =\ 53.97\ grams[/tex]
Theorical yield of Na₂SO₄ is 53.97 grams
Therefore, [tex]\rm Percent\ yield\ = \frac{actual\ yield}{theoretical\ yield} \times 100[/tex]
[tex]\rm =\ \frac{24.5}{53.97}\times 100[/tex]
= 45.44%
The percent yield of the reaction is 45.44%
To know more on percent yield, click on
https://brainly.com/question/12704041
#SPJ1
. What is that substance that yields hydrogen ion [H] when added with water?
Calculate the solubility of MgF2 in water if the Ksp for the compound is 6.4 x 10-9.
The solubility of MgF₂ in water is 0.00635 moles per liter, if Ksp for the compound is 6.4 x 10⁻⁹.
The solubility of a compound in water is determined by its solubility product constant (Ksp), which is a measure of the extent to which the compound dissociates into its constituent ions in water.
For the given compound, magnesium fluoride (MgF₂), the Ksp is 6.4 x 10⁻⁹.
MgF₂ dissociates in water according to the following equation;
MgF₂(s) ↔ Mg²⁺(aq) + 2F⁻(aq)
The Ksp expression for MgF₂ is then;
Ksp = [Mg²⁺] × [F⁻]²
where [Mg²⁺] represents the concentration of Mg²⁺ ions in solution, and [F⁻] represents the concentration of F⁻ ions in solution.
Since MgF₂ dissociates into one Mg²⁺ ion and two F⁻ ions, the stoichiometry of the reaction is 1:2. This means that for every mole of MgF₂ that dissolves, one mole of Mg²⁺ ions and two moles of F⁻ ions are formed.
Let's assume that the solubility of MgF₂ in water is "x" moles per liter. Therefore, the concentration of Mg²⁺ ions and F⁻ ions in solution will also be "x" moles per liter.
Substituting these values into the Ksp expression, we get;
Ksp = [Mg²⁺] × [F⁻]²
6.4 x 10⁻⁹ = x × (2x)²
6.4 x 10⁻⁹ = 4x³
Now, we can solve for "x";
4x³ = 6.4 x 10⁻⁹
x³ = (6.4 x 10⁻⁹ / 4
x³ = 1.6 x 10⁻⁹
x = (1.6 x 10⁻⁹(1/3)
x ≈ 0.00635
Therefore, the solubility of MgF₂ in water is approximately 0.00635 moles per liter.
To know more about solubility here
https://brainly.com/question/22185953
#SPJ1
If 6.00 6.00 L of water vapor at 50.2 °C 50.2 ° C and 0.121 0.121 atm reacts with excess iron, how many grams of iron(III) oxide will be produced? 2Fe(s)+3H2O(g)⟶Fe2O3(s)+3H2(g) 2 Fe ( s ) + 3 H 2 O ( g ) ⟶ Fe 2 O 3 ( s ) + 3 H 2 ( g )
The mass of iron(III) oxide produced is 115.29 grams.
To determine the mass of iron(III) oxide produced, we can use the stoichiometry of the balanced chemical equation provided.
The balanced equation shows that 2 moles of iron (Fe) react with 3 moles of water vapor (H₂O) to produce 1 mole of iron(III) oxide ( Fe₂O₃).
Given that we have 6.00 L of water vapor at 50.2 °C and 0.121 atm, we can use the ideal gas law to calculate the moles of water vapor;
PV = nRT, where P is pressure, V is volume, n is moles, R is the ideal gas constant, and T is temperature in Kelvin.
First, let's convert the temperature from Celsius to Kelvin;
T = 50.2 + 273.15 = 323.35 K
Now, we can plug in the values and solve for n;
0.121 atm × 6.00 L = n × 0.0821 atm L/mol K × 323.35 K
n = (0.121 atm × 6.00 L) / (0.0821 atm L/mol K × 323.35 K)
n = 0.361 mol
According to the stoichiometry of the balanced equation, the mole ratio between Fe and Fe₂O₃ is 2:1. Therefore, 0.361 mol of water vapor will react with 2 × 0.361 mol = 0.722 mol of Fe.
Now, we can calculate the molar mass of Fe₂O₃;
Fe₂O₃ = 2 × atomic mass of Fe + 3 × atomic mass of O
Fe₂O₃ = 2 × 55.85 g/mol + 3 × 16.00 g/mol
Fe₂O₃ = 159.70 g/mol
Finally, we can calculate the mass of Fe₂O₃ produced;
Mass of Fe₂O₃ = moles of Fe₂O₃ × molar mass of Fe₂O₃
Mass of Fe₂O₃ = 0.722 mol × 159.70 g/mol
Mass of Fe₂O₃ = 115.29 g
To know more about iron(III) oxide here
https://brainly.com/question/8834237
#SPJ1
Rank the following elements by increasing Ionization energy: Cs, Sn, W, Xe
(1 being small, 4 being large)
pls help me with homework!!!
The ranking of the elements by increasing ionization energy is; Cs < Sn < W < Xe.
Xenon (Xe) has the highest ionization energy among the given elements. It is a noble gas in Group 18 of the periodic table and has a full complement of valence electrons, making it very stable and difficult to remove an electron.
Tungsten (W) has higher ionization energy compared to tin. It is a transition metal in Group 6 of the periodic table and has even more valence electrons, which are held more tightly by the increased effective nuclear charge, resulting in higher ionization energy.
Tin (Sn) has higher ionization energy compared to cesium. It is a metal in Group 14 of the periodic table and has more valence electrons, which are closer to the nucleus, requiring more energy to remove.
Cesium (Cs) has the lowest ionization energy among the given elements. It is in the alkali metal group (Group 1) of the periodic table and has only one valence electron, which is relatively far from the nucleus, making it easier to remove.
To know more about ionization energy here
https://brainly.com/question/29203628
#SPJ1
Calculate the acid ionization constant for propanoic acid if a 0.200 M solution is 0.815% ionized. The abbreviated structural formula for butanoic acid is CH3CH2COOH.
The ionization constant of propanoic acid is 0.7181
The ionization constant (Ka) of the monoprotic acid can be calculated using the equation:
Ka = ([H⁺][A⁻])/[HA]
where [H⁺] is the concentration of hydrogen ions, [A⁻] is the concentration of the conjugate base, and [HA] is the initial concentration of the acid.
We know that the acid is 0.815 percent ionized, which means that only 0.815 percent of the initial concentration of the acid has ionized into hydrogen ions and the conjugate base.
Therefore, the concentration of hydrogen ions and the conjugate base can be calculated using the following equations:
[H⁺] = 0.815 x 0.200 M = 0.163 M
[A⁻] = 0.815 x 0.200 M = 0.163 M
The initial concentration of the acid ([HA]) can be calculated by subtracting the concentration of hydrogen ions and the conjugate base from the initial concentration of the solution:
[HA] = 0.200 M - 0.163M= 0.037 M
Substituting these values into the equation for Ka, we get:
Ka = (0.163 M)² / 0.037M = 0.7181
Therefore, the ionization constant (Ka) of propanoic acid is 0.7181
To know more about ionization constant here :
brainly.com/question/28385102
#SPJ1