4. what is the gravitational attraction between two objects of mass 5,000,000kg (5.0 x 106 kg) at a distance of
100 meters from each other? estimate g as 6.67 * 10-11 n (m/kg)?
a. ion
b. .17 n
c. 57000 n
d. 2300 n
e. 1900 n
help asap no rocky

net force: 60( not sure)

I would say it's unbalanced because these forces are not of the same magnitude.

When the current flows up the wire, the magnetic field flows in on the left side of the wire and out on the right side of the wire.

The right-hand rule is a method for determining the direction of the force experienced by a current-carrying conductor in a magnetic field or the direction of the magnetic field created by the conductor.

The direction of the magnetic field created by the current is indicated by the way your fingers curl. This is the statement of the right hand rule as shown in the image.

Learn more about right hand rule:https://brainly.com/question/9750730

#SPJ1

Some machines will have a body constructed around a frame for added structural support and stability.

This design approach ensures that the machine can withstand various forces, stresses, and vibrations that it may encounter during operation. The frame acts as a skeleton, providing a solid foundation for the machine's various components, such as motors, gears, and electronic systems, to be mounted securely.

By constructing the body around the frame, the machine's weight is evenly distributed, helping to prevent any undue strain on individual parts. This structural design can also facilitate easier maintenance, as components can be accessed and replaced more easily.

Additionally, the frame may be designed with specific materials, such as steel or aluminum, to enhance durability and resist corrosion. In summary, constructing a machine's body around a frame provides numerous benefits, including enhanced structural support, improved stability, and easier maintenance.

To know more about machines, refer here:

https://brainly.com/question/2555822#

#SPJ11

The refractive index of the wave in medium X is 0.577.

The refractive index of a substance or medium measures how much light can bend through it. The difference between the speed of light in an object or medium and the speed of light in a vacuum (or in air) is how it is defined. Usually, the letter n is used to denote the refractive index.

The refractive index of a substance or medium is a critical property that determines how light will behave when it passes through it.

We know that the refractive index can be obtained as;

n = sin i/sinr

Thus we have that;

sin i = sin 30

sin r = sin 60

n = sin 30/sin 60

n = 0.577

Learn more about refractive index:https://brainly.com/question/23750645

#SPJ1

The effective resistance of the TV set is 35.6 ohms (Ω).

To find the effective resistance of the TV set, we can use Ohm's Law, which states that Voltage (V) = Current (I) × Resistance (R). We need to rearrange the formula to solve for resistance: R = V / I.

Given the information in your question:
Current (I) = 2.5 A
Voltage (V) = 89 V

Now we can calculate the resistance (R):
R = V / I
R = 89 V / 2.5 A
R = 35.6 Ω

The effective resistance of the TV set is 35.6 ohms (Ω).

To learn more about current, refer below:

https://brainly.com/question/13076734

#SPJ11

Pressure vs. Depth Lab:

Pressure is defined as the force per unit area applied on an object. It is a scalar quantity, which means it only has magnitude and no specific direction.

It is often measured in units of Pascals (Pa), which is equivalent to one Newton of force per square meter of area. Pressure can be caused by the weight of an object, the force applied by a fluid, or the collision of particles with a surface.

Find out more on pressure here: https://brainly.com/question/28012687

#SPJ1

The copper cable's smallest possible cross-sectional area is 1.54 x 10-6 square meters.

To calculate the smallest cross-sectional area of the copper cable, we can use the formula for resistance:

R = ρ(L/A),

where R is the resistance (in ohms), ρ is the resistivity of the material (in ohm meters), L is the length of the conductor (in meters), and A is the cross-sectional area (in square meters).

Given the maximum allowable resistance (R) is 0.01 ohms per meter (one-hundredth of an ohm per meter) and the resistivity of copper (ρ) is 1.54 x 10^-8 ohm meters. Let's calculate the smallest cross-sectional area (A) that can be used.

First, we'll rewrite the formula for A:

A = ρ(L/R).

Since R is given as ohms per meter, we can set L to 1 meter for simplicity, and the formula becomes:

A = ρ(1/R).

Now, we can plug in the given values:

A = (1.54 x 10^-8)/(0.01).

A = 1.54 x 10^-6 square meters.

So, the smallest cross-sectional area of the copper cable that could be used is 1.54 x 10^-6 square meters.

Know more about Resistance here:

https://brainly.com/question/30799966

#SPJ11

It should be noted that the statement regarding the weightlifter is true.

A weightlifter must apply a certain amount of force to lift a set of barbells off the ground. This force is known as the lifting force and it must be greater than the weight of the barbells in order to overcome the force of gravity and lift the barbells.

The amount of lifting force required will depend on the weight of the barbells and the strength of the weightlifter's muscles. The weightlifter can increase their lifting force by improving their strength and technique through training and practice.

Learn more about weight on

https://brainly.com/question/27855042

#SPJ1

A weight lifter must be expert of force to lift a set of barbells off the ground

true or false

Answer:

1.  0.102 mol/kg.

2. 0.444 mol/kg.

Explanation:

To calculate molality, we need to know the moles of solute (NaCl) and the mass of the solvent (water) in kilograms. First, we need to convert the mass of NaCl to moles by dividing by its molar mass. Then we convert the mass of water to kilograms. Molality (m) is equal to moles of solute divided by kilograms of solvent.

First, we need to convert the mass of glucose to moles by dividing by its molar mass. Then we convert the volume of water to kilograms. Molality (m) is equal to moles of solute divided by kilograms of solvent. Finally, we need to round the answer to three significant figures.

No, our spring resonance model did not account for the heat energy in the medium. Heat energy is generated due to the friction between the spring and the medium during the oscillation of the spring.

This energy is dissipated into the medium in the form of thermal energy, causing the amplitude of the oscillation to decrease over time.

In order to develop an accurate and complete model of the spring resonance, we need to account for the heat energy generated during the oscillation.

This is important because the amount of heat generated depends on the mechanical properties of the medium and the frequency and amplitude of the oscillation, and can have a significant impact on the behavior of the system.

By accounting for heat energy, we can better understand the dynamics of the system and predict how it will behave over time.

This can be particularly important in practical applications, such as in engineering and design, where we need to know how a system will perform under different conditions and over long periods of time.

To know more about thermal energy refer here

brainly.com/question/30859008#

#SPJ11

The speed of a wave in a medium depends on the properties of that medium, such as its density and elasticity. The frequency of the wave, or the number of cycles it completes in a second, does not affect its speed.

Therefore, both wave A and wave B will travel through the air at the same speed, which is approximately 343 meters per second at room temperature and atmospheric pressure.

However, the wavelength of a wave is inversely proportional to its frequency, so wave B will have a shorter wavelength than wave A.

This means that wave B will have a higher energy and be more directional than wave A, but it will not travel faster through the air.

In summary, the frequency of a wave does not affect its speed in a given medium, and both wave A and wave B will travel through the air at the same speed of approximately 343 meters per second.

To know more about elasticity refer here

https://brainly.com/question/28790459#

#SPJ11

The delay time for the signal that you send to mars from earth is 22.4 minutes.

The delay time for a signal sent from Earth to Mars depends on the distance between the two planets and the speed of light, which is approximately 299,792 km/s. Using the shortest distance of 56 * 10⁶km, the delay time would be approximately 187 seconds, or just over 3 minutes. Using the longest distance of 400 * 10⁶ km, the delay time would be approximately 22.4 minutes. Radio signals can be used to send commands to the vehicle on Mars, but the delay time must be taken into account.

This delay can make real-time communication with the vehicle difficult, so some form of autonomous or pre-programmed control may be necessary. Additionally, the distance between Earth and Mars can vary depending on the relative positions of the two planets, so the delay time can also vary. However, despite these challenges, radio communication remains a vital tool for sending commands and receiving data from spacecraft on Mars and other distant locations in the solar system.

To know more about the Distance, here

https://brainly.com/question/13046933

#SPJ4

Answer:

yes

Explanation:

The wavelength of the wave as we have it is 3m

A wave's wavelength is the separation between two successive locations on the wave that are in phase, or at the same stage of their cycle. In other terms, it is the separation between two wave crests or troughs.

We know that the wavelength = Number of crests = 3m

Wave speed = 3 m/s

We would then have that;

v = λf

v = wave speed

f = frequency

λ = wavelength

Thus since there are three crests then the wavelength must be 3m

Learn more about wavelength:https://brainly.com/question/31143857

#SPJ1

The  weight  of the concrete column with a diameter of 350mm and a length of 2m, having a density of 2.45 Mg/m³, is: approximately 1042 pounds.

To determine the weight of the concrete column with a diameter of 350mm and a length of 2m, we first need to calculate its volume. Since the column is cylindrical, we can use the formula for the volume of a cylinder: V = πr²h, where V is the volume, r is the radius, and h is the height.

The radius of the column is half of the diameter, so r = 350mm / 2 = 175mm, which is equivalent to 0.175m. The height is 2m. Plugging these values into the formula, we get:

V = π(0.175m)²(2m) ≈ 0.193m³

Now that we have the volume, we can use the given density of concrete, which is 2.45 Mg/m³, to determine the mass. The mass can be calculated using the formula: mass = density × volume.

Mass = 2.45 Mg/m³ × 0.193m³ ≈ 0.473 Mg

Next, we need to convert the mass from Mg (megagrams) to kg (kilograms) since 1 Mg = 1000 kg:

Mass = 0.473 Mg × 1000 kg/Mg = 473 kg

Now, to find the weight, we'll use the formula: weight = mass × gravity. The gravitational force is approximately 9.81 m/s².

Weight = 473 kg × 9.81 m/s² ≈ 4638.93 N (Newtons)

Finally, we'll convert the weight from Newtons to pounds using the given conversion factor: 1 pound = 4.4482 N.

Weight = 4638.93 N × (1 pound / 4.4482 N) ≈ 1042 pounds

To know more about density, refer here:

https://brainly.com/question/28929608

#SPJ11

Complete question:

A concrete column has a diameter of 350mm and a length of 2m.  If the density (mass/volume) of concrete is 2.45 Mg/m3  determine the weight of the column in pounds.  1 pound = 4.4482 N

We need to first calculate the final velocity of the two cars after the collision. We can do this using the conservation of momentum principle, which states that the total momentum of a system remains constant if no external forces act on it.

Initially, the east-moving car has a momentum of (1345 kg) x (15.7 m/s) = 21136.5 kg m/s in the east direction, while the north-moving car has a momentum of (1923 kg) x (v) in the north direction, where v is the velocity of the north-moving car.

After the collision, the two cars stick together and move with a velocity of 14.5 m/s at an angle of 63.5 degrees. To find the velocity in the x-direction (east), we can use the cosine function:

cos(63.5 degrees) = x / 14.5 m/s

x = cos(63.5 degrees) x 14.5 m/s = 6.25 m/s

Similarly, to find the velocity in the y-direction (north), we can use the sine function:

sin(63.5 degrees) = y / 14.5 m/s

y = sin(63.5 degrees) x 14.5 m/s = 13.12 m/s

Therefore, the final velocity of the two cars is (6.25 m/s) east + (13.12 m/s) north = 14.5 m/s at 63.5 degrees.

To determine if the north-moving car exceeded the 20.1 m/s speed limit, we need to compare its initial velocity with the speed limit. The initial velocity of the north-moving car is not given in the problem, so we cannot determine whether it exceeded the speed limit or not.

In summary, the final velocity of the two cars after the collision is 14.5 m/s at 63.5 degrees. However, we cannot determine whether the north-moving car exceeded the 20.1 m/s speed limit without additional information.

To know more about conservation of momentum principle refer here

https://brainly.com/question/30582604#

#SPJ11

The correct order of the electromagnetic spectrum from low to high frequencies is: radio waves, microwaves, infrared, visible, UV, X-rays, gamma rays. Option C is correct.

The electromagnetic spectrum is the range of all types of electromagnetic radiation, from low-frequency radio waves to high-frequency gamma rays.  Radio waves have the longest wavelengths and lowest frequencies, followed by microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays, which have the shortest wavelengths and highest frequencies.

This order is based on the different ways in which electromagnetic radiation interacts with matter, with longer wavelengths being less energetic and shorter wavelengths being more energetic. It is important to note that while this order is generally accepted, there can be some overlap and variation depending on context and source. Option C is correct.

To know more about the Electromagnetic, here

https://brainly.com/question/14876487

#SPJ4

Josh pushes a table with a force of 80. N at an angle of 30° to the table. If he pushes the table 5 meters then Josh has done 346.41 Joules of work on the table.

To calculate the work done by Josh on the table, we can use the formula:

[tex]W = F \times d \times cos(\theta)[/tex]

where W is the work done, F is the force applied, d is the distance moved, and theta is the angle between the force and the direction of motion.

Substituting the given values, we get:

[tex]W = 80 N \times 5 m \times cos(30^{\circ})[/tex]

W = 346.41 J

Therefore, Josh has done 346.41 Joules of work on the table. To understand the concept of work, it is important to note that work is done when a force is applied to an object and it causes it to move.

In this case, Josh applies a force of 80 N at an angle of 30° to the table, causing it to move 5 meters. The work done is calculated by multiplying the force, distance, and cosine of the angle between them.

In summary, to calculate the work done by Josh on the table, we use the formula [tex]W = F \times d \times cos(\theta)[/tex] , where W is the work done, F is the force applied, d is the distance moved, and theta is the angle between the force and the direction of motion.

By substituting the given values, we find that Josh has done 346.41 Joules of work on the table.

To know more about force refer here:

https://brainly.com/question/26115859#

#SPJ11

You would need to pull on the string with a force of 5.76 N to produce the same acceleration you obtained with a force of 15 N on the chain.

To calculate the force needed to produce the same acceleration as a force of 15 N on the chain, we need to use the formula:
force = mass × acceleration

First, we need to calculate the acceleration of the bicycle wheel when a force of 15 N is applied to the chain. We can use the formula:
acceleration = [tex]\frac{acceleration}{mass}[/tex]
Assuming the mass of the wheel is negligible, we can simplify this to:
acceleration = [tex]=\frac{force}{0.38}[/tex] = [tex]\frac{15N}{0.38}[/tex]=39.47 N/m

Now we can calculate the force needed to produce the same acceleration when pulling on the string wrapped around the tire. We can use the formula:
force = mass × acceleration
The mass of the wheel does not change, so we can use the same acceleration value we calculated earlier. However, the radius of the tire is different from the radius of the gear, so we need to take this into account.

The circumference of the tire is 2π(0.38 m) = 2.39 m, while the circumference of the gear is 2π(0.14 m) = 0.88 m.

This means that the force needed to produce the same acceleration when pulling on the string is:
force = mass × acceleration × [tex](\frac{radius of the gear}{radius of the tire} )[/tex]
= 0.38 kg x 39.47 N/m x [tex](\frac{0.14 m}{0.38 m} )[/tex]
= 5.76 N

To know more about the different types of forces visit:

https://brainly.com/question/13191643

#SPJ11

The three components of the journey's vector is 267.7 m, the displacement by the time taken is 22.3 m/min, the average speed is 23 m/min and the average speed with a precision of ±5% and ±20 s is 21.9 m/min to 23 m/min.

Magnitude is a measure of the size or intensity of something. It is usually a numerical quantity or value, such as size, energy, power, intensity, brightness, strength, or speed. Magnitude is a mathematical concept that is used to compare and evaluate different values.

Using this theorem, we can find the magnitude of the displacement (d) by taking the square root of the sum of the squares of the three components of the journey's vector.
d = √(160² + (180*cos45)² + (250*cos35)²)
d = √(25600 + 25600 + 20625)
d = √71725
d ≈ 267.7 m

To calculate the average speed, we need to divide the magnitude of the displacement by the time taken.
Average Speed = d/t
Average Speed = 267.7 m/12 min
Average Speed = 22.3 m/min
To account for the precision of ±5%, we can add or subtract 5% of the displacement, and ±20 s of the time taken.

Using the new values, we can calculate the average speed as follows:
Average Speed = (267.7 ± 13.4 m)/(12 min ± 20 s)
Average Speed = (254.3 m - 281.1 m)/(11 min 40 s - 12 min 20 s)
Average Speed = (254.3 m/11 min 40 s) - (281.1 m/12 min 20 s)
Average Speed = 21.9 m/min - 23 m/min
Therefore, the average speed with a precision of ±5% and ±20 s is 21.9 m/min to 23 m/min.

To learn more about  magnitude

https://brainly.com/question/24256733

#SPJ4

The fundamental frequency of the 1.90-m-long wire with a mass of 0.100 kg and tension of 21.0 N is approximately 5.24 Hz.

Given the information provided, we have a 1.90-m-long wire with a mass of 0.100 kg that is fixed at both ends and has a tension of 21.0 N.
To find the linear mass density (µ) of the wire, we can use the following formula:
µ = mass/length
Using the given values, we can calculate µ as follows:
µ = 0.100 kg / 1.90 m = 0.05263 kg/m
Now that we have the linear mass density, we can find the fundamental frequency (f) using the formula:
f = (1 / 2L) × √(T / µ)
Where:
f = fundamental frequency
L = length of the wire
T = tension
µ = linear mass density
Substituting the values we found earlier, we get:
f = (1 / 2 × 1.90 m) × √(21.0 N / 0.05263 kg/m)
f ≈ 0.263 × √(399.2) ≈ 5.24 Hz
So, the fundamental frequency of the 1.90-m-long wire with a mass of 0.100 kg and a tension of 21.0 N is approximately

5.24 Hz.

Learn more about frequency here:-

https://brainly.com/question/5102661

#SPJ11

The amount of heat transferred to the wooden beam is 2,040,000 Joules.

During the course of a hot, summer day, the temperature of the wooden beam slowly increases from 15°C at night to a final temperature of 35°C during the day.

To calculate the amount of heat transferred to the wooden beam with a mass of 60kg, follow these steps:

Step 1: Determine the temperature change (∆T)

∆T = [tex]T_{final} - T_{initial}[/tex]

∆T = 35°C - 15°C

∆T = 20°C

Step 2: Find the specific heat capacity (c) of the wooden beam

The specific heat capacity of wood varies depending on its type. For this example, let's use an average specific heat capacity of wood, which is approximately 1700 J/(kg·K).

Step 3: Calculate the amount of heat transferred (Q) using the formula:

Q = mc∆T

where

m is the mass of the wooden beam,

c is the specific heat capacity of wood, and

∆T is the temperature change.

Step 4: Plug in the values and solve for Q

Q = (60 kg)(1700 J/(kg·K))(20 K)

Q = 2,040,000 J

Therefore, the amount of heat transferred to the wooden beam is 2,040,000 Joules.

To know more about temperature refer here

brainly.com/question/11464844#

#SPJ11

The direction of the change in momentum of the ball is in the opposite direction of its original momentum. This is because when the ball bounces off the floor, it experiences an equal and opposite force, which causes its momentum to change direction.

This is known as an elastic collision, and the change in momentum is equal in magnitude to the original momentum but in the opposite direction. This is because the total momentum is conserved in the collision. This means that the sum of the momentum of the ball after the collision is equal to the sum of the momentum of the ball before the collision.

Since the ball has no external forces acting on it, the only way for the momentum to remain the same is for the momentum to change direction. Therefore, the direction of the change in momentum of the ball is in the opposite direction of its original momentum.

Know more about elastic collision here

https://brainly.com/question/31356190#

#SPJ11

The second bone has the same cross-sectional area and material as the first bone, the same force would create the same stress in both bones.

To solve this problem, we need to consider the relationship between stress, strain, and Young's modulus. Stress is the force applied divided by the cross-sectional area, strain is the change in length divided by the original length, and Young's modulus is a material property that relates stress and strain.

1. Calculate stress (σ) for the first bone:
σ = Force / Cross-sectional area

2. Calculate strain (ε) for the first bone:
ε = Compression / Original Length
ε = 1.0 mm / Original Length

3. Find Young's modulus (Y) for the bone material:
Y = σ / ε

4. Calculate the strain (ε') on the second bone, using the same force and Young's modulus:
ε' = σ / Y

5. Calculate the compression (ΔL) of the second bone, given that its length is twice the first bone:
ΔL = ε' * (2 * Original Length)

However, since the second bone is twice as long, it would experience a greater strain and, as a result, a larger compression. By calculating the compression of the second bone using the relationship between stress, strain, and Young's modulus, you can determine how much the same force would compress the second bone.

For more about cross-sectional area:

https://brainly.com/question/20532494

#SPJ11

The marble-jar experiment is a classic demonstration of Newton's Law of Inertia. The experiment consists of a jar filled with marbles and a card covering the jar's opening.

When the jar is inverted quickly, the card falls, and the marbles remain in place.

According to Newton's Law of Inertia, an object at rest will remain at rest, and an object in motion will continue to move in a straight line at a constant velocity unless acted upon by an external force.

In this experiment, the marbles' inertia keeps them in place when the jar is inverted, while the card falls due to the external force of gravity.

This experiment provides a simple and tangible way to understand Newton's Law of Inertia.

To know more about Law of Inertia, refer here:

https://brainly.com/question/1830739#

#SPJ11

Answer:

Developing decision-making skills is a vital aspect that occurs during the stage of intellectual development in adolescent development.

Explanation:

During adolescence, individuals undergo significant changes in their cognitive abilities, including an increase in abstract thinking, reasoning, and problem-solving skills. These changes allow adolescents to start thinking critically and independently, weigh options, and make more informed decisions about their lives.

As adolescents develop their intellectual abilities, they also gain more control over their lives and begin to make decisions about their education, career paths, relationships, and other important aspects of their lives. This is a critical time for developing decision-making skills, as the decisions made during adolescence can have significant and long-lasting effects on individuals' lives.

While other aspects of adolescent development, such as social, emotional, and physical development, are also important, intellectual development plays a crucial role in helping adolescents navigate the complex and challenging decisions they face as they transition to adulthood.

The stunt woman experienced a force of 1393 N while landing in the net.

A 100 kg stunt woman falls from a 9.9 m high building and is slowed down by a net over the course of 1 s. To calculate the force she experienced while landing, we first need to determine her velocity when hitting the net.

We can use the formula: v^2 = u^2 + 2as
where v is the final velocity, u is the initial velocity (0 m/s), a is the acceleration due to gravity (9.81 m/s^2), and s is the distance fallen (9.9 m).

v^2 = 0 + 2(9.81)(9.9)
v^2 = 194.118
v = √194.118 ≈ 13.93 m/s

Now, we can use the impulse-momentum theorem to find the force: Ft = mv - mu
where F is the force, t is the time taken to slow down (1 s), m is the mass (100 kg), and v and u are the final and initial velocities, respectively.

F(1) = (100)(13.93) - (100)(0)
F = 1393 N

To know more about the force, click here;

https://brainly.com/question/13191643

#SPJ11

Answer:

yes

Explanation: