4. if 10.0 moles of naoh are dissolved in water to make 250.0 l of solution, what is the molarity of the
solution?
5. if 80.0 moles of naoh are dissolved in water to make 1.00 liter of solution, what is the molarity of the
solution?
6. if you have 1.00 liter of a 1.0 m solution of nacl, how many moles of nacl were dissolved in the water to
make that solution?
7. if you have 1.0 liter of a 1.00 m solution of nacl, how many moles of nacl were dissolved in the water to
make that solution?
write complete sentences.
8. how would you make 100.0 l of 1.0 m naoh?

In this scenario, the limiting reactant is the ingredient that will run out first and limit the number of sandwiches that can be made.

Assuming that each sandwich requires two slices of bread, one serving of peanut butter, and one serving of jelly, we can see that we have enough bread and jelly to make a maximum of 1.5 sandwiches. However, since we only have one serving of peanut butter, we can only make one sandwich.

Therefore, the peanut butter is the limiting reactant. It is important to identify the limiting reactant in chemical reactions to determine the maximum amount of product that can be formed and to avoid wasting resources.

To know more about the limiting reactant refer here :

https://brainly.com/question/14225536#

#SPJ11

a) The percent ionization of nitrous acid in this 0.495M solution is 2.64%.

b) The value of Ka for nitrous acid is 4.45 x 10⁻⁴.

c) The pH of the solution formed by adding 1.0g NaNO₂ to 750mL of 0.0125M HNO₂ is 2.83.



a) Percent ionization = ([tex]10^-^p^H[/tex] / initial concentration) x 100
  Percent ionization = ( [tex]10^-^1^.^8^3[/tex] / 0.495) x 100 = 2.64%

b) Ka = [H⁺][NO₂⁻] / [HNO₂]
  Ka = ( [tex]10^-^1^.^8^3[/tex] )² / (0.495 -  [tex]10^-^1^.^8^3[/tex] ) = 4.45 x 10⁻⁴

c) 1. Calculate moles of NaNO₂: (1g / 69.0 g/mol) = 0.0145 mol
  2. Calculate initial concentration of NO₂⁻: 0.0145 mol / 0.750 L = 0.0193 M
  3. Use Henderson-Hasselbalch equation:

  pH = pKa + log([NO₂⁻]/[HNO₂])
  pH = -log(4.45 x 10⁻⁴) + log(0.0193 / 0.0125) = 2.83

To know more about Henderson-Hasselbalch equation click on below link:

https://brainly.com/question/31732200#

#SPJ11

The (OH⁻) concentration in green tea with a pH of 8.2 is 6.31 x 10⁻⁷ M.

This suggests that the solution is slightly basic in nature. pH is a measure of hydrogen ion concentration, and the higher the pH, the lower the hydrogen ion concentration.

This means that in green tea, there are more hydroxide ions than hydrogen ions present, making it a basic solution.

It is important to note that the pH of green tea can vary depending on the brand and preparation method. Nonetheless, overall, green tea is considered a healthy beverage due to its antioxidant properties and potential health benefits.

To know more about pH click on below link:

https://brainly.com/question/2288405#

#SPJ11

The density of oil is 0.55 g/mL
To determine the density of the oil, first calculate the mass of the oil alone by subtracting the mass of the empty beaker from the total mass: 100 grams (total mass) - 45 grams (empty beaker mass) = 55 grams (mass of oil).

Now, use the formula for density, which is:

Density = Mass / Volume

In this case:

Density of oil = 55 grams (mass of oil) / 100 milliliters (volume of oil) = 0.55 g/mL.

So, the density of the oil is 0.55 g/mL.

To know more about density:

https://brainly.com/question/1354972

#SPJ11

Approximately 5272.2 grams of PbCl4 were added to 2700 grams of ethanol to increase the boiling point by 6.8 degrees.

To determine the grams of PbCl4 added to 2700 grams of ethanol, causing the boiling point to increase by 6.8 degrees, we will use the molality-based boiling point elevation formula, which is:

ΔTb = Kb * m

Here, ΔTb is the change in boiling point (6.8 degrees), Kb is the molal boiling point elevation constant of ethanol (1.22 °C kg/mol), and m is the molality (moles of solute per kg of solvent).

First, we need to find the molality (m) of the solution:

6.8 = 1.22 * m
m = 6.8 / 1.22 ≈ 5.57 mol/kg

Now, we can calculate the moles of PbCl4 added to the ethanol:

5.57 mol/kg * (2700 g / 1000 g/kg) ≈ 15.03 mol of PbCl4

Next, we need to find the molar mass of PbCl4:

Pb: 207.2 g/mol
Cl: 35.45 g/mol

Molar mass of PbCl4 = 207.2 + (4 * 35.45) ≈ 350.6 g/mol

Finally, we can calculate the grams of PbCl4 added to the ethanol:

15.03 mol * 350.6 g/mol ≈ 5272.2 g

Therefore, approximately 5272.2 grams of PbCl4 were added to 2700 grams of ethanol to increase the boiling point by 6.8 degrees.

To know more about ethanol, visit:

https://brainly.com/question/25002448#

#SPJ11

The atomic theory of matter states that all matter, whether an element, a compound or a mixture is composed of small particles called atoms.

The atomic theory is any of the several theories that explain the structure of the atom, and of subatomic particles.

The atomic theory of matter, first postulated by John Dalton, seeks to explain the nature of matter-the materials of which the Universe, all galaxies, solar systems and Earth are formed.

The components of the atomic theory are as follows;

Learn more about atomic theory at: https://brainly.com/question/28853813

#SPJ1

The volume of the gas at 35.0°C would be approximately 324.7 mL, assuming a constant pressure of 1 atm.

To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas. The formula :

[tex](P_1 * V_1)[/tex] ÷ [tex]T_1 = (P_2 * V_2)[/tex] ÷ [tex]T_2[/tex]

We can assume that the pressure is constant since it is not mentioned in the problem. Also, we need to convert the temperatures to Kelvin by adding 273.15 to each Celsius temperature.

Using the formula and the given values, we get:

[tex](P_1 * V_1)[/tex]  ÷ [tex]T_1 = (P_2 * V_2)[/tex] ÷ [tex]T_2[/tex]

[tex]V_2 = (P_1 * V_1 * T_2)[/tex] ÷[tex](T_1 * P_2)[/tex]

We can plug in the values:

[tex]P_1 = unknown\\V_1 = 300.0 mL \\T_1 = 17.0 + 273.15 = 290.15 K \\P_2 = unknown \\T_2 = 35.0 + 273.15 = 308.15 K[/tex]

Now, we need to assume a pressure value. Let's assume the pressure is constant at 1 atmosphere (atm). We can now solve for [tex]V_2[/tex]:

[tex]V_2 = (P_1 * V_1 * T_2)[/tex]  ÷ [tex](T_1 * P_2)[/tex]

[tex]V_2 = (1 atm * 300.0 mL * 308.15 K)[/tex] ÷ [tex](290.15 K * 1 atm)[/tex]

[tex]V_2 = 324.7 mL[/tex]

To know more about combined gas law, here

brainly.com/question/30458409

#SPJ1

The evidence that best supports the student's claim that "life is possible because of the unique mixture of gases that cycle through the Earth's spheres" is the presence and balance of oxygen, nitrogen, and carbon dioxide in the atmosphere.

These gases play a crucial role in maintaining life on Earth by supporting respiration, regulating temperature, and enabling the carbon cycle, which allows organisms to exchange and utilize carbon for growth and energy production.

Oxygen: Oxygen is a vital gas for sustaining life on Earth. It is a key component of the atmosphere, making up about 21% of its composition. Oxygen is essential for respiration, the process by which organisms extract energy from food.

Through respiration, organisms break down glucose (derived from food) and use oxygen to produce energy-rich molecules called adenosine triphosphate (ATP).

This energy is necessary for cellular functions and metabolic activities. Many organisms, including humans, require oxygen to survive.

Nitrogen: Nitrogen is the most abundant gas in the Earth's atmosphere, accounting for approximately 78% of its composition. Although nitrogen is relatively inert and does not directly participate in biological processes, it is crucial for life.

Nitrogen is an essential component of amino acids, proteins, and nucleic acids (DNA and RNA), which are fundamental building blocks of life. Nitrogen fixation, a process carried out by certain bacteria, converts atmospheric nitrogen into forms that can be used by plants and other organisms.

This allows nitrogen to enter the food chain and support the growth and development of living organisms.

Carbon Dioxide: Carbon dioxide is a greenhouse gas and an integral part of the Earth's carbon cycle. It plays a significant role in regulating the planet's temperature through the greenhouse effect.

Carbon dioxide traps heat in the atmosphere, preventing excessive heat loss into space and maintaining a suitable temperature range for life. Additionally, carbon dioxide is essential for photosynthesis, a process carried out by plants and other autotrophic organisms.

During photosynthesis, carbon dioxide is absorbed, and with the help of sunlight, it is converted into glucose and oxygen. This process not only provides oxygen for respiration but also allows organisms to utilize carbon for growth, energy production, and the formation of organic compounds.

To learn more about glucose, refer below:

https://brainly.com/question/30548064

#SPJ11

The pressure of a gas is directly proportional to the number of moles of gas present, and inversely proportional to the volume of the container. Therefore, given the temperature of the gas in the tire remains constant, the pressure of the gas can be calculated using the ideal gas law:

PV = nRT

Where P is pressure, V is volume, n is number of moles, R is the ideal gas constant, and T is temperature.

In this case, the number of moles is 0.448 mol, the temperature is 28°C (or 301 K), and the volume is 7.32 l.

Plugging in all the values, we get:

P = (0.448 mol) × (8.314 L·atm·K−1·mol−1) × (301 K) / (7.32 l)

P = 4.20 atm

Therefore, the pressure of the gas in the tire is 4.20 atm.

Know more about Ideal gas law here

https://brainly.com/question/28257995#

#SPJ11

Tributaries meets river at a confluence.

The pressure of the [tex]Co_{2}[/tex]  gas in the 12.2 L vessel at a temperature of 42°C with 1.13 mol of CO2 is 2.12 atm.

The volume of the vessel =  12.2 L

Number of moles of [tex]Co_{2}[/tex] =  1. 13 mol

Temperature = 42 degrees

To calculate the pressure of the gas we need to use the ideal gas law equation.

PV = nRT

P = nRT/V

Assuming that the Universal gas constant R =  0.0821 L·atm/(mol·K).

Converting the temperature degrees into Kelvin scale

T = 42°C + 273.15 = 315.15 K

Substituting the above values into the equation:

P = [(1.13 mol) * (0.0821 L·atm/mol·K)* (315.15 K)] / (12.2 L) = 2.12 atm

Therefore, we can conclude that the pressure of the gas is 2.12 atm.

To learn more about Pressure

https://brainly.com/question/25764275

#SPJ4

The complete question is:

What is the pressure required in a 12. 2 L vessel that contains 1. 13 mol of Co2 at a temperature of 42 degrees C?

(i) To calculate the molar concentration of sodium hydroxide, we first need to calculate the number of moles of sodium hydroxide in the solution. The molar mass of NaOH is 40.0 g/mol.

Number of moles of NaOH = Mass of NaOH / Molar mass of NaOH

= 0.93 g / 40.0 g/mol

= 0.02325 mol

Volume of solution = 75.0 cm³ = 0.075 L

Molar concentration of NaOH = Number of moles of NaOH / Volume of solution

= 0.02325 mol / 0.075 L

= 0.31 M

Mass concentration of NaOH = Mass of NaOH / Volume of solution

= 0.93 g / 0.075 L

= 12.4 g/L

(ii) To calculate the molar concentration of hydrochloric acid, we first need to calculate the number of moles of HCl in the solution. The molar mass of HCl is 36.5 g/mol.

Number of moles of HCl = (Volume of HCl gas x Density of HCl gas) / Molar mass of HCl

= (240.0 cm³ x 1.639 g/L) / 36.5 g/mol

= 10.75 mol

Volume of solution = 100.0 cm³ = 0.100 L

Molar concentration of HCl = Number of moles of HCl / Volume of solution

= 10.75 mol / 0.100 L

= 108 M

Mass concentration of HCl = (Molar concentration of HCl x Molar mass of HCl) / Density of solution

= (108 mol/L x 36.5 g/mol) / 1.00 g/cm³

= 3942 g/L

To know more about concentration refer to-

https://brainly.com/question/15532279

#SPJ11

According to the question the q(gas) in J for this compression process is 0J.

Gas is a state of matter in which particles are spread out and have enough energy to move around freely. Gas is composed of molecules in constant motion and takes the shape and volume of its container. Gas can be either naturally occurring or man-made and is found in the atmosphere. Examples of naturally occurring gases include oxygen, nitrogen, and carbon dioxide. Man-made gases include helium, chlorine, and hydrogen. Gas is often used as a source of energy and is burned to produce heat, which can be used to power machines and vehicles. Gas is also used in many industries, such as in the production of chemicals and plastics.

In this case, n = 0.100 moles,
[tex]C_v[/tex] = (3/2)R = (3/2)(8.314 J/mol K) = 12.471 J/mol K, and
T₁ = 298.0 K,
T2 = 298.0 K.
Therefore, q(gas)
= nCv (T₂- T₁)
= 0.100 mol × 12.471 J/mol K × (298.0 K - 298.0 K)
= 0 J.

To learn more about gas

https://brainly.com/question/25736513

#SPJ4

The pH of the buffer is 4.60.

To calculate the pH of a buffer, we can use the Henderson-Hasselbalch equation:

[tex]pH = pKa + log([A-]/[HA])[/tex]

where pKa is the dissociation constant of the weak acid, [tex][A-][/tex] is the concentration of the conjugate base, and [tex][HA][/tex] is the concentration of the weak acid.

In this case, the weak acid is acetic acid[tex](HC2H3O2)[/tex], the conjugate base is acetate [tex](C2H3O2-)[/tex], and the dissociation constant (Ka) is [tex]1.8 × 10^-5[/tex].

First, we need to calculate the ratio of [tex][A-]/[HA][/tex]:

[tex][A-]/[HA] = (0.162 M)/(0.225 M) = 0.72[/tex]

Next, we can substitute the values into the Henderson-Hasselbalch equation:

[tex]pH = pKa + log([A-]/[HA])\\pH = -log(1.8 × 10^-5) + log(0.72)[/tex]

pH = 4.74 + (-0.14)

pH = 4.60

Therefore, the pH of the buffer is 4.60.

To know more about pH refer to-

https://brainly.com/question/491373

#SPJ11

The current would have to be applied for approximately 10.33 hours to plate out 6.70 g of tin.

The amount of tin plated out can be calculated using Faraday's law of electrolysis, which states:

Mass of substance plated = (Current x Time x Atomic weight) / (Valency x Faraday's constant)

The atomic weight of tin is 118.71 g/mol, and its valency is 2 (since it forms Sn2+ ions in the solution). The Faraday's constant is 96,485 C/mol.

Plugging in the given values, we get:

6.70 g = (4.82 A x t x 118.71 g/mol) / (2 x 96485 C/mol)

Solving for t, we get:

t = (6.70 g x 2 x 96485 C/mol) / (4.82 A x 118.71 g/mol)

t = 10.33 hours

Therefore, the current would have to be applied for approximately 10.33 hours to plate out 6.70 g of tin.

To know more about Faraday's law  refer to-

https://brainly.com/question/1640558

#SPJ11

Katja will use different colors of paper in her experiment to test her hypothesis and determine which color of paper will increase the most in temperature when exposed to sunlight.

By using a variety of colors, Katja can compare the results and determine if her hypothesis is correct or if another color of paper increases the most in temperature.

This experiment will provide valuable information about the effects of different colors on temperature and can be useful in a variety of applications, such as in the development of materials that are resistant to heat or for designing energy-efficient buildings that reflect sunlight.

Ultimately, the use of different colors of paper in this experiment allows for a more thorough and accurate analysis of the relationship between color and temperature.

To know more about sunlight click on below link:

https://brainly.com/question/27183506#

#SPJ11

When sodium chloride solution is added to lead nitrate solution then it results in the formation of a precipitate of lead chloride and sodium nitrate.

Precipitation reactions occur when cations and anions in aqueous solution combine to form an insoluble ionic solid called a precipitate. Whether or not such a reaction occurs can be determined by using the solubility rules for common ionic solids Percent composition tells you which types of atoms (elements) are present in a molecule and their levels. Percent composition can also tell you about the different elements present in an ionic compound as well.

To learn more about precipitation reaction check the link below-

https://brainly.com/question/13016165

#SPJ4

If the vascular plants never developed, the Earth would be drastically different. Vascular plants are responsible for much of the oxygen production on our planet, so the atmosphere would contain significantly less oxygen. Additionally, without the root systems of vascular plants, soil erosion would be much more prevalent and the landscape would likely be more barren.

The evolution of many animals, including insects and birds, would have been impacted as well, as many of these species rely on vascular plants for food and shelter. Overall, the absence of vascular plants would have a profound effect on the ecology and biodiversity of our planet.

For more questions on: oxygen

https://brainly.com/question/28009615

#SPJ11

87.88% of the carbon in the fuel has been converted to CO instead of CO2 during the combustion of ethylene with 33% excess air.

Combustion is a chemical reaction in which a substance reacts with oxygen to release energy in the form of heat and light. In this case, ethylene is being burned with 33% excess air, meaning there is more oxygen available than required for complete combustion.

The analysis of the dry base combustion products indicates that 6.06% of the products are CO2 by volume. Since the rest of the results have been lost, we can only work with the given information.

To determine the percentage of carbon in the fuel converted to CO instead of CO2, we need to first find the percentage of carbon converted to CO2. In complete combustion, each carbon atom in ethylene (C2H4) would react with oxygen to form one molecule of CO2. The balanced chemical equation for complete combustion of ethylene is:

C2H4 + 3O2 -> 2CO2 + 2H2O

Now, we know that 6.06% of the combustion products are CO2. Since ethylene has two carbon atoms, the percentage of carbon in the fuel converted to CO2 is 2 x 6.06% = 12.12%.

To find the percentage of carbon converted to CO instead of CO2, we need to subtract this percentage from the total carbon content in the fuel, which is 100% (since all carbon will be either converted to CO or CO2). Therefore, the percentage of carbon in the fuel converted to CO instead of CO2 is:

100% - 12.12% = 87.88%

So, 87.88% of the carbon in the fuel has been converted to CO instead of CO2 during the combustion of ethylene with 33% excess air.

To know more about ethylene, visit:

https://brainly.com/question/14797464#

#SPJ11

Without knowing the balanced chemical equation for the reaction involving A2, B, D, and E, it is not possible to determine the equilibrium constant Kp.

The equilibrium constant Kp is specific to a particular chemical reaction at a given temperature, and is determined by the stoichiometry of the reaction and the relative partial pressures of the reactants and products at equilibrium.

Therefore, to calculate Kp, we need to know the balanced chemical equation for the reaction involving A2, B, D, and E, as well as the partial pressures of the gases at equilibrium.

To know more about balanced refer here

https://brainly.com/question/27154367#

#SPJ11

The number of moles present in 6.50g of ZnSO4 is 0.0403 moles.

The number of moles in a substance can be calculated by dividing the mass of the substance by its molar mass as follows:

no of moles = mass ÷ molar mass

According to this question, 6.50 grams of zinc sulphate is given. The number of moles in the substance can be calculated as follows:

molar mass of zinc sulphate = 161.47 g/mol

no of moles = 6.50g ÷ 161.47 g/mol

no of moles = 0.0403 moles

Learn more about moles at: https://brainly.com/question/20928252

#SPJ1

The portable hot pack design contains 100g of water and a separated chemical. When mixed, it will achieve a temperature of 55°C (131°F).

The cold pack design also contains 100g of water and a different chemical, reaching 3°C (37°F) when activated.

Hot Pack:
1. Use an exothermic reaction (e.g., calcium chloride dissolving in water).
2. Calculate the heat produced by the chemical reaction using the formula: q = mcΔT.
3. Determine the mass of the chemical needed using stoichiometry.

Cold Pack:
1. Use an endothermic reaction (e.g., ammonium nitrate dissolving in water).
2. Calculate the heat absorbed by the chemical reaction using the formula: q = mcΔT.
3. Determine the mass of the chemical needed using stoichiometry.

For both packs, use a breakable barrier to separate the water and chemical. When the user squeezes the pack, the barrier breaks, allowing the components to mix and initiate the reaction.

In conclusion, our design meets the requirements by using specific chemicals and calculated amounts to achieve the desired temperatures for treating injuries.

To know more about exothermic reaction click on below link:

https://brainly.com/question/10373907#

#SPJ11

No, the metal has not disappeared. Chemical reactions only rearrange atoms and do not destroy or create them.

In the case of reclaiming metals from solutions, a chemical reaction is used to separate the metal ions from other elements in the solution, allowing the metal to be recovered in a pure form. This is typically achieved by adding a reactant that will cause the metal ions to precipitate out of the solution as a solid, which can then be separated and processed further to extract the metal.

So, the metal is still present in the reaction mixture, but it is now in a more concentrated and recoverable form. This process is important for reducing the amount of toxic waste generated from industrial processes and can also help to conserve natural resources by recycling valuable metals.

To learn more about reclaiming metals, here

https://brainly.com/question/15018157

#SPJ4

The molar solubility of [tex]AgBr[/tex] in [tex]2.8 x 10^-2 M AgNO3[/tex] solution is [tex]7.1 x 10^-7 M[/tex].

To calculate the molar solubility of [tex]AgBr[/tex] in [tex]2.8 x 10^-2 M AgNO3[/tex] solution, we need to use the common ion effect. The [tex]Ag+[/tex] ion is a common ion in both [tex]AgBr and AgNO3[/tex]. When we add [tex]AgNO3[/tex] to a solution containing AgBr, it adds more [tex]Ag+[/tex] ions to the solution and causes a shift in the equilibrium to the left. The solubility of [tex]AgBr[/tex]decreases due to this effect.

The balanced equation for the dissolution of [tex]AgBr[/tex] is:

[tex]AgBr(s) ⇌ Ag+(aq) + Br-(aq)[/tex]

The Ksp expression for AgBr is:

Ksp = [Ag+][Br-] = 5.0 x 10^-13

Let x be the molar solubility of [tex]AgBr[/tex]in [tex]2.8 x 10^-2 M AgNO3[/tex]solution. Then the concentration of [tex]Ag+[/tex] ion is[tex][Ag+] = 2.8 x 10^-2 + x[/tex], and the concentration of [tex]Br-[/tex] ion is[tex][Br-] = x[/tex].

Substituting these values into the Ksp expression, we get:

[tex]Ksp = (2.8 x 10^-2 + x)(x) = 5.0 x 10^-13[/tex]

Simplifying the equation and neglecting x in comparison to [tex]2.8 x 10^-2[/tex], we get:

[tex]x^2 = 5.0 x 10^-13x = sqrt(5.0 x 10^-13) = 7.1 x 10^-7 M[/tex]

To know more about molar solubility  refer to-

https://brainly.com/question/28170449

#SPJ11

Nicolaas' model is a scientific model that explains the movement of water on Earth. According to the model, the two primary factors responsible for the movement of water on Earth are evaporation and precipitation.

Evaporation occurs when water changes from a liquid to a gas state due to heat from the sun. This process results in the formation of water vapor that rises into the atmosphere. Precipitation occurs when water vapor condenses in the atmosphere and falls back to the surface as rain, snow, or hail. These two processes play a critical role in the water cycle, which is essential for the survival of life on Earth. Therefore, Nicolaas' model highlights the significance of evaporation and precipitation in the movement of water on Earth.

Learn more about Nicolaas' model at https://brainly.com/question/15923461

#SPJ11

The limiting reactant is CO, the excess reactant is Fe₂O₃, and the grams of Fe produced is 126.8 g. when 11.5 g of c are allowed to react with 114.5 g of cu2o, then, 101.7 g of Cu is produced.

The balanced equation for the reaction is;

Fe₂O₃ + 3CO → 2Fe + 3CO₂

To determine the limiting and excess reactants, we need to compare the number of moles of each reactant to their stoichiometric ratio in the balanced equation.

First, we need to convert the given mass of Fe₂O₃ to moles;

molar mass of Fe₂O₃ = 2(55.85 g/mol) + 3(16.00 g/mol) = 159.69 g/mol

moles of Fe₂O₃ =185 g / 159.69 g/mol

= 1.16 mol

Next, we need to convert the given number of moles of CO to grams:

molar mass of CO = 12.01 g/mol + 16.00 g/mol

= 28.01 g/mol

mass of CO = 3.4 mol x 28.01 g/mol

= 95 g

Now, we can compare the number of moles of Fe₂O₃ and CO to their stoichiometric ratio in the balanced equation;

Fe₂O₃:CO = 1:3

moles of CO needed = 3 x 1.16 mol = 3.48 mol

Since we only have 3.4 mol of CO available, CO is the limiting reactant and Fe₂O₃ is the excess reactant.

To calculate the grams of Fe produced, we need to use the amount of limiting reactant (CO) as the basis for the calculation;

moles of Fe produced = (3.4 mol CO) x (2 mol Fe / 3 mol CO)

= 2.27 mol Fe

molar mass of Fe = 55.85 g/mol

mass of Fe produced = (2.27 mol Fe) x (55.85 g/mol) = 126.8 g Fe

Therefore, the limiting reactant is CO, the excess reactant is Fe₂O₃, and the grams of Fe produced is 126.8 g.

The balanced equation for the reaction is;

Cu₂O + C → 2Cu + CO₂

To determine the grams of Cu produced, we need to first identify the limiting reactant.

First, we need to convert the given masses of C and Cu₂O to moles;

molar mass of C = 12.01 g/mol

moles of C = 11.5 g / 12.01 g/mol = 0.958 mol

molar mass of Cu₂O = 2(63.55 g/mol) + 16.00 g/mol

= 143.10 g/mol

moles of Cu₂O = 114.5 g / 143.10 g/mol

= 0.800 mol

Next, we need to compare the number of moles of each reactant to their stoichiometric ratio in the balanced equation;

Cu₂O:C = 1:1

Since we have 0.958 mol of C and 0.800 mol of Cu₂O, Cu₂O is the limiting reactant.

To calculate the grams of Cu produced, we need to use the amount of limiting reactant (Cu₂O) as the basis for the calculation:

moles of Cu produced = (0.800 mol Cu₂O) x (2 mol Cu / 1 mol Cu₂O) = 1.60 mol Cu

molar mass of Cu = 63.55 g/mol

mass of Cu produced = (1.60 mol Cu) x (63.55 g/mol) = 101.7 g Cu

Therefore, 101.7 g of Cu is produced.

To know more about limiting reactant here

https://brainly.com/question/2948214

#SPJ4

The answer is (d) The radiation from the microwave decreased its viscosity by breaking the syrup's intermolecular forces.

When the syrup is heated in the microwave, the thermal energy from the microwaves increases the kinetic energy of the molecules in the syrup. This increased kinetic energy causes the molecules to move more quickly, leading to a decrease in the syrup's viscosity.

As the viscosity decreases, the syrup flows more easily, allowing it to pour more quickly. The intermolecular forces between the molecules of the syrup are weakened due to the increased kinetic energy, leading to a decrease in the viscosity of the syrup. Thus, option (d) is the correct answer.

To learn more about surface tension, here

https://brainly.com/question/11348644

#SPJ4

The 3p subshell in the ground state of atomic silicon contains 3 electrons.

In the ground state of atomic silicon, the electronic configuration is 1s²2s²2p⁶3s²3p².

The 3p subshell can accommodate a total of six electrons, as there are three orbitals in the subshell: 3px, 3py, and 3pz. The first two electrons in the 3p subshell will occupy the 3px and 3py orbitals singly, as required by Hund's rule, while the remaining four electrons will pair up in the 3pz orbital.

Therefore, the 3p subshell in the ground state of atomic silicon contains four electrons.

It's worth noting that the electronic configuration of an atom can be determined by using the periodic table and the rules of electron configuration.

Silicon, which has an atomic number of 14, has two electrons in the 1s orbital, two electrons in the 2s orbital, six electrons in the 2p orbital, two electrons in the 3s orbital, and four electrons in the 3p orbital.

To know more about ground state refer to-

https://brainly.com/question/1314094

#SPJ11

The larger tire will have a greater volume, but the amount of air in each tire is the same, so the pressure in both tires will be the same. The correct answer is the option: C.

The pressure of a gas is related to its temperature, volume, and the number of molecules present, according to the Ideal Gas Law: PV = nRT,

Assuming the temperature, number of molecules, and the amount of air in both tires are the same, the pressure of the air in the tires will depend only on the volume of the tires. Therefore, both tires will have the same air pressure. The correct answer is C.

To know more about Ideal Gas Law, here

brainly.com/question/13821925

#SPJ4

--The complete Question is, Assume that you put the same amount of room-temperature air in two tires. if one tire is bigger than the other, how will air pressure in the two tires compare?

A. the bigger tire will have greater air pressure.

B. the smaller tire will have greater air pressure.

C. both tires will have the same air pressure. --

In the reaction 2Fe3+(aq) + 2Hg(l) + 2Cl−(aq) → 2Fe2+(aq) + Hg2Cl2(s), the species that loses electrons is Hg(l).

Here, mercury (Hg) undergoes oxidation, changing from Hg(l) to Hg2Cl2(s), and in the process, it loses electrons to form a bond with Cl− ions.

Hg(0)     →        Hg(+1)    +      1 e-

And Iron undergoes reduction, Fe3+ (aq) accepts one electron to become Fe2+ (aq).

Fe(+3)    +      1 e-      →       Fe(+2)

To know more about oxidation and reduction, click below.

https://brainly.com/question/28216195?

#SPJ11