A one molal solution is easier to prepare.
A one molal solution is easier to prepare than a one molar solution because it involves a smaller amount of solute. A one molar solution contains one mole of solute per liter of solution, while a one molal solution contains one mole of solute per kilogram of solvent. Since a kilogram of solvent is usually easier to measure than a liter of solution, it is easier to prepare a one molal solution. Additionally, the concentration of a one molal solution is dependent on the mass of solvent, which is more consistent and precise than the volume of solution.
Know more about Molal here:
https://brainly.com/question/26921570
#SPJ11
9. calculate the ph of a buffered solution prepared by dissolving 21.5 g benzoic acid and 37.7 g sodium benzoate in 200.0 ml of solution.
The pH of the buffered solution is 4.374.
A buffered solution is a solution that resists changes in pH when small amounts of acid or base are added to it.
In order to calculate the pH of a buffered solution, we need to use the Henderson-Hasselbalch equation, which is pH = pKa + log([A-]/[HA]). In this equation, pKa is the dissociation constant of the weak acid (benzoic acid in this case), [A-] is the concentration of the conjugate base (sodium benzoate), and [HA] is the concentration of the weak acid.
First, we need to find the concentrations of benzoic acid and sodium benzoate in the solution. We can use the equation n = cV, where n is the number of moles, c is the concentration, and V is the volume.
For benzoic acid:
n = (21.5 g / 122.12 g/mol) = 0.176 mol
c = 0.176 mol / 0.2 L = 0.88 M
[HA] = 0.88 M
For sodium benzoate:
n = (37.7 g / 144.11 g/mol) = 0.262 mol
c = 0.262 mol / 0.2 L = 1.31 M
[A-] = 1.31 M
Next, we need to find the pKa of benzoic acid. The pKa of benzoic acid is 4.20.
Now we can plug in the values into the Henderson-Hasselbalch equation:
pH = 4.20 + log([1.31]/[0.88])
pH = 4.20 + log(1.49)
pH = 4.20 + 0.174
pH = 4.374
Therefore, the pH of the buffered solution is 4.374.
To know more about pH, visit:
https://brainly.com/question/15289741#
#SPJ11
A chemical company has just employed you to solve their financial dilemma. The company has an overabundance of silver nitrate solution and a huge debt that it must settle or announce bankruptcy.
Evaluate the following data and suggest a chemistry based plan for the company that may just prevent it from going bankrupt. (Hint: Think about a type of reaction and how it might be used to make the company money. The answer should include the reaction and an explanation. Use the information below.)
To solve the financial dilemma, the chemical company can consider using the excess silver nitrate solution to synthesize silver nanoparticles, which have various applications in industries.
What is Silver nanoparticles?Silver nanoparticles can be synthesized by reducing silver ions with a reducing agent, and silver nitrate can serve as a source of silver ions.
One possible reaction for the synthesis of silver nanoparticles using silver nitrate is the reduction of silver ions with sodium borohydride (NaBH4). The reaction can be represented as:
AgNO3 + NaBH4 → Ag nanoparticles + NaNO3 + B2H6
In this reaction, silver nitrate is the oxidizing agent, which accepts electrons, while sodium borohydride is the reducing agent, which donates electrons to reduce the silver ions. The reaction also produces sodium nitrate and borane gas as byproducts.
The synthesized silver nanoparticles can be sold to various industries, generating revenue for the company and potentially reducing their debt. The company can also consider optimizing the synthesis process to increase the yield and purity of the silver nanoparticles, which can increase their market value.
Learn more about silver nanoparticles here: https://brainly.com/question/16055011
#SPJ1
1. 98 g of calcium chloride and 3. 75 g of sodium oxide are combined. Theoretically,
what mass of solid product could be formed from these amounts of reactants? What
is the limiting reactant?
Answer:
It off soudium and i know this from experments so the answear is b
Explanation:
Why is the answer a not d?
The correct answer is therefore A, -1.66 V.
The given information includes the standard reduction potential of the half-reaction:
Ag(aq) + e- → Ag(s) E° = +0.80 V
We can use this information along with the standard cell potential equation to find the standard reduction potential of the half-reaction:
E°cell = E°reduction + E°oxidation
where E°cell is the standard cell potential, E°reduction is the reduction potential for the half-reaction being reduced, and E°oxidation is the oxidation potential for the half-reaction being oxidized.
In this case, the two half-reactions involved are:
M3+(aq) + 3e- → M(s) (reduction)
3Ag(aq) → 3Ag+(aq) + 3e- (oxidation)
The reduction half-reaction needs to be flipped and its potential sign changed to obtain the oxidation potential:
M(s) → M3+(aq) + 3e- (oxidation)
The standard cell potential is the difference between the reduction and oxidation potentials:
E°cell = E°reduction + E°oxidation
E°cell = E°(M3+(aq) + 3e- → M(s)) + E°(M(s) → M3+(aq) + 3e-)
E°cell = E°(M(s) → M3+(aq) + 3e-) + (-E°(3Ag(aq) → 3Ag+(aq) + 3e-))
E°cell = E°(M(s) → M3+(aq) + 3e-) - E°(Ag(aq) → Ag(s))
E°cell = E°(M3+(aq) + 3e- → M(s)) - E°(Ag(aq) → Ag(s))
E°cell = -2.46 V - 0.80 V = -3.26 V
Therefore, the standard reduction potential for the half-reaction M3+(aq) + 3e- → M(s) is:
E°(M3+(aq) + 3e- → M(s)) = E°cell + E°(Ag(aq) → Ag(s))
E°(M3+(aq) + 3e- → M(s)) = -3.26 V + 0.80 V = -2.46 V
The correct answer is therefore A, -1.66 V.
learn more about reduction potential here
https://brainly.com/question/20040177
#SPJ1
0. 008 moles of C3H7OH contains how many atoms of carbon?
To determine the number of carbon atoms in 0.008 moles of C3H7OH, we first need to find the molar mass of the compound.
The molar mass of C3H7OH can be calculated by adding the atomic masses of all the atoms in the molecule:
3(12.011) + 8(1.008) + 1(15.999) = 60.096 g/mol
This means that 1 mole of C3H7OH has a mass of 60.096 g.
To calculate the number of moles of carbon atoms in 0.008 moles of C3H7OH, we need to multiply the number of moles of C3H7OH by the number of carbon atoms in one mole of C3H7OH.
One mole of C3H7OH contains 3 carbon atoms, so 0.008 moles of C3H7OH contains:
0.008 moles x 3 = 0.024 moles of carbon atoms
Finally, we can convert moles of carbon atoms to the number of carbon atoms using Avogadro's number, which is 6.022 x 10^23 atoms per mole:
0.024 moles x 6.022 x 10^23 atoms/mole = 1.445 x 10^22 atoms of carbon
Therefore, 0.008 moles of C3H7OH contains 1.445 x 10^22 atoms of carbon.
To learn more about propanol, click here: https://brainly.com/question/30909638
#SPJ11
Your shopping cart has a mass of 20 kg. If you push it with a force of 20 N, what is the acceleration of the cart?
Answer:
1000m/s^2
Explanation:
since F=ma
:a=m/F
Yo convert ur m from kg to g
20×1000
20000
a=20000\20
a=1000m/s^2
Is baking soda soluble in soda? Is sugar soluble in soda?
Baking soda is actually a compound known as sodium bicarbonate, which is water-soluble. Sugar, on the other hand, is also soluble in water and other liquids that contain water.
This means that it dissolves in water and can also dissolve in other liquids that contain water, such as soda. Therefore, baking soda is indeed soluble in soda.
Sugar, on the other hand, is also soluble in water and other liquids that contain water. This includes soda, which is a carbonated beverage that typically contains a high amount of dissolved sugar.
However, the solubility of sugar in soda can depend on various factors such as the temperature of the soda, the amount of sugar present, and the type of sugar used.
In general, both baking soda and sugar are soluble in soda and can dissolve to some extent. However, the exact degree of solubility can vary depending on various factors. It is worth noting that excessive consumption of sugary soda can have negative impacts on health, so it is important to consume such beverages in moderation.
To know more about sodium bicarbonate, visit:
https://brainly.com/question/8560563#
#SPJ11
If a substance has a bitter taste, feels slippery , conducts electricity, and has a high pH, it is a ?
The substance described in the question is most likely a base or an alkali. Bases have a bitter taste, feel slippery or soapy to the touch, conduct electricity in solution, and have a pH above 7.
The slipperiness is due to the ability of bases to react with oils and fats to form soaps, which have a slippery texture.
The ability to conduct electricity is due to the presence of ions in the solution. In the case of bases, these are usually hydroxide ions (OH-) which can conduct electric current when dissolved in water.
The high pH is also characteristic of bases, as pH is a measure of the concentration of hydrogen ions (H+) in solution. In the case of bases, the concentration of OH- ions is higher than the concentration of H+ ions, leading to a pH above 7.
Examples of common bases include "sodium hydroxide (NaOH), potassium hydroxide (KOH), and calcium hydroxide (Ca(OH)2)".
to know more about alkali refer here:
https://brainly.com/question/30607576#
#SPJ11
A chemist interested in the efficiency of a chemical reaction would calculate the.
A chemist interested in the efficiency of a chemical reaction would calculate the percent yield. To do this, follow these steps:
1. Determine the balanced chemical equation for the reaction, which shows the stoichiometric relationship between reactants and products.
2. Identify the limiting reactant by comparing the initial amounts of reactants to their stoichiometric ratios in the balanced equation.
3. Calculate the theoretical yield by using the stoichiometric relationship between the limiting reactant and the desired product, based on their balanced chemical equation.
4. Measure the actual yield of the product obtained from the experiment.
5. Calculate the percent yield using the formula: (Actual yield / Theoretical yield) × 100%.
This process will provide the chemist with a measure of the efficiency of the chemical reaction.
Complete question : A chemist interested in the efficiency of a chemical reaction would calculate the percent yield ?
To know more about chemical reaction :
https://brainly.com/question/30417381
#SPJ11
A gas occupies 37. 5 mL at 102. 3 kPa. At 27. 5 mL, what will the pressure be?
The pressure will be 139.92 kPa at a volume of 27.5 mL.
To answer this question, we will use Boyle's Law formula, which states that the product of the initial pressure (P1) and volume (V1) of a gas is equal to the product of the final pressure (P2) and volume (V2) when the temperature remains constant.
Step 1: Identify the initial pressure (P1), initial volume (V1), and final volume (V2).
P1 = 102.3 kPa
V1 = 37.5 mL
V2 = 27.5 mL
Step 2: Apply Boyle's Law formula, which is P1 * V1 = P2 * V2. We need to find the final pressure (P2).
102.3 kPa * 37.5 mL = P2 * 27.5 mL
Step 3: Solve for P2.
P2 = (102.3 kPa * 37.5 mL) / 27.5 mL
Step 4: Calculate the value of P2.
P2 ≈ 139.64 kPa
At 27.5 mL, the pressure of the gas will be approximately 139.64 kPa.
Learn more about pressure at https://brainly.com/question/28012687
#SPJ11
Which group of the periodic table contains element t?
Hi! Element "t" does not exist in the periodic table.
The known chemical elements are listed in the periodic chart in increasing atomic number order. Elements that have comparable chemical and physical properties are grouped together in columns referred to as "groups" in the table's rows and columns. The periodic table has 18 groups, numbered from 1 to 18.
In chemical equations and formulas, each element in the periodic table is represented by a distinct symbol made up of one or two letters. For instance, the letters "H" and "He" stand for hydrogen, "C" stands for carbon, and so on.
If you could provide me with more information about the element you are referring to, such as its full name or its atomic number, I would be happy to help you locate it on the periodic table and tell you which group it belongs to.
To know more about the periodic table, click here;
https://brainly.com/question/31672126
#SPJ11
_____is a sequence of a chain of amino acids
Answer: polypeptide chain
Explanation:
The temperature of a sample of gas in a steel tank at 50.0 kPa is
increased from -100.0°C to 35.0 °C. What is the final pressure
inside the tank?
The final pressure inside the tank is 88.9 kPa.
How to find the final pressureTo solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas.
The combined gas law is given by:
(P1 * V1) / (T1) = (P2 * V2) / (T2)
where
P1 and T1 are the initial pressure and temperature of the gas,
V1 is the initial volume of the gas,
P2 is the final pressure of the gas,
V2 is the final volume of the gas, and
T2 is the final temperature of the gas.
We can assume that the volume of the gas in the tank remains constant, since it is a steel tank. Therefore, V1 = V2.
We can convert the temperatures to Kelvin by adding 273.15 to each temperature value. Therefore,
T1 = 173.15 K and
T2 = 308.15 K.
Substituting these values into the combined gas law, we get:
(50.0 kPa * V1) / (173.15 K) = (P2 * V1) / (308.15 K)
P2 = (50.0 kPa * 308.15 K) / 173.15 K
P2 = 88.98 kPa
Learn more about pressure at:
https://brainly.com/question/28012687
#SPJ1
Answer:
88.98 kPa (2 d.p.)
Explanation:
To find the final pressure inside the steel tank, we can use Gay-Lussac's law since the volume is constant.
Gay-Lussac's law[tex]\boxed{\sf \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}}[/tex]
where:
P₁ is the initial pressure.T₁ is the initial temperature (in kelvins).P₂ is the final pressure.T₂ is the final temperature (in kelvins).As we are solving for the final pressure, rearrange the equation to isolate P₂:
[tex]\sf P_2=\dfrac{P_1T_2}{T_1}[/tex]
Convert the given temperatures from Celsius to Kelvin by adding 273.15:
[tex]\implies \sf T_1=-100+273.15=173.15\;K[/tex]
[tex]\implies \sf T_2=35+273.15=308.15\;K[/tex]
Therefore, the values to substitute into the equation are:
P₁ = 50.0 kPaT₁ = 173.15 KT₂ = 308.15 KSubstitute the values into the equation and solve for P₂:
[tex]\implies \sf P_2=\dfrac{50.0\cdot 308.15}{173.15}[/tex]
[tex]\implies \sf P_2=\dfrac{15407.5}{173.15}[/tex]
[tex]\implies \sf P_2=88.98354028...[/tex]
[tex]\implies \sf P_2=88.98\;kPa\;(2\;d.p.)[/tex]
Therefore, the final pressure inside the steel tank is 88.98 kPa when the temperature is increased from -100.0°C to 35.0°C.
Research the history of DNA analysis in forensic science and create a timeline to show its evolution over the years
DNA analysis has revolutionized forensic science in the past few decades. It has become an indispensable tool for crime scene investigations, identifying suspects, and exonerating the innocent.
The history of DNA analysis dates back to 1984, when British geneticist Alec Jeffreys developed the technique of DNA fingerprinting. He used variable number tandem repeats (VNTRs) to create a unique DNA profile for each individual.
In 1986, DNA analysis was first used in a cri-minal case, where it was used to exonerate a man who had been wrongly convicted of ra-pe and mu-rder. Since then, DNA analysis has been used in several high-profile cases, such as the OJ Simpson trial in 1995 and the identification of 9/11 victims in 2001.
The technique of DNA fingerprinting evolved over the years, with the development of polymerase chain reaction (PCR) and short tandem repeats (STRs) in the 1990s. PCR enabled amplification of DNA samples, while STRs provided greater discrimination power in creating unique DNA profiles.
The first DNA database was established in the UK in 1995, followed by the US in 1998. Today, DNA databases are used worldwide for identifying suspects and matching DNA samples to cri-me scenes.
The latest advancements in DNA analysis include next-generation sequencing (NGS), which can analyze entire genomes, and mitochondrial DNA analysis, which can identify maternal lineage.
In conclusion, DNA analysis has come a long way since its inception in the 1980s. It has become an essential tool for forensic investigations and has contributed significantly to the justice system. The technique continues to evolve, and future advancements in DNA analysis will undoubtedly improve its effectiveness and accuracy.
To know more about DNA analysis, visit:
https://brainly.com/question/19340987#
#SPJ11
During nuclear fission and fusion, matter that seems to disappear is actually converted intoa. massb. energyc. volumed. nuclei
Answer: B. Energy
Explanation: The matter is converted into energy, which is released in the form of radiation, this is due to the fact that the mass of the products of the reaction is less than the mass of the reactants, and this difference in mass is converted into energy. Aka ([tex]E=mc^{2}[/tex]).
the solubility of magnesium fluoride, mgf2, in water is 1.5x10^-2 g/l. what is the solubility (in grams per liter) of magnesium fluoride in 0.13 m of sodium fluoride, naf?
The solubility of the magnesium fluoride, MgF₂, in the water is 1.5 × 10⁻² g/l. The solubility of magnesium fluoride in 0.13 M of the sodium fluoride, NaF is 0.88 M.
The solubility, Ksp = 1.5 × 10⁻² g/L
The concentration , NaF = 0.13 M
The solubility of the magnesium fluoride that is MgF₂ is expressed as :
The solubility of the magnesium fluoride = Ksp / NaF²
The solubility of the magnesium fluoride = 1.5 × 10⁻² / (0.13 )²
The solubility of the magnesium fluoride = 0.88 M
Therefore, the solubility of the magnesium fluoride in 0.13 M of the sodium fluoride is 0.88 M.
To learn more about solubility here
https://brainly.com/question/14524193
#SPJ4
Determine the molar mass of choch,. provide an answer to two
decimal places.
The molar mass of [tex]CHOCH[/tex] is 64.05 g/mol, which means that one mole of [tex]CHOCH[/tex] has a mass of 64.05 grams.
The molar mass of a compound is the mass in grams of one mole of the substance. To calculate the molar mass of [tex]CHOCH[/tex], we need to determine the atomic masses of all the atoms in one molecule of the compound and add them together.
[tex]CHOCH[/tex] has one carbon (C) atom, three oxygen (O) atoms, and four hydrogen (H) atoms. The atomic mass of C is 12.01 g/mol, O is 16.00 g/mol, and H is 1.01 g/mol. Therefore, we can calculate the molar mass of [tex]CHOCH[/tex] as follows:
Molar mass = (1 x atomic mass of C) + (3 x atomic mass of O) + (4 x atomic mass of H)
Molar mass = (1 x 12.01) + (3 x 16.00) + (4 x 1.01)
Molar mass = 64.05 g/mol
Therefore, the molar mass of [tex]CHOCH[/tex] is 64.05 g/mol, which means that one mole of [tex]CHOCH[/tex] has a mass of 64.05 grams.
To know more about molar mass refer to-
https://brainly.com/question/22997914
#SPJ11
1. A 35. 3 g of element M is reacted with nitrogen to produce 43. 5 g of compo und M3N2. What is (i) the molar mass of the element and (ii) name of the element?
A 35. 3 g of element M is reacted with nitrogen to produce 43. 5 g of compo und M₃N₂ (i) The molar mass of element M is 24.0 g/mol. (ii) The name of the element is magnesium (Mg).
(i) To find the molar mass of element M, we need to use stoichiometry to relate the mass of M to the mass of M₃N₂. We can start by calculating the moles of M3N2 produced:
43.5 g M₃N₂ × 1 mol M₃N₂/100.9 g M₃N₂ = 0.43 mol M₃N₂
Since the molar ratio between M and M₃N₂ is 1:3, we can calculate the moles of M:
0.43 mol M₃N₂ × 1 mol M/3 mol M₃N₂ = 0.14 mol M
Finally, we can calculate the molar mass of M by dividing its mass (35.3 g) by the number of moles (0.14 mol):
molar mass of M = 35.3 g/0.14 mol = 253 g/mol
However, this value is much higher than the molar mass of any known element. We can recognize that the formula M₃N₂ implies that element M is a metal with a +2 charge, since each M atom forms 3 bonds with N atoms, and each N atom forms 2 bonds with M atoms.
(ii) Based on this information, we can identify element M as magnesium (Mg), which has a molar mass of 24.0 g/mol.
To know more about molar mass, refer here:
https://brainly.com/question/22997914#
#SPJ11
What type of packaging is used for milk? How do the physical and chemical properties of each packaging type help create a new and better product? (Material, reactivity, shape, hardness, color) What is the relationship between reactivity of material type chosen and element position in the periodic table? Discuss the importance of a package on human health. Explain – Aluminum is a highly reactive metal, why is it used for making cooking utensils?
Milk is commonly packaged in different types of containers, such as cartons, plastic bottles, and glass bottles. Each packaging type has its physical and chemical properties, which can affect the quality, shelf-life, and safety of the product.
Cartons are commonly used for shelf-stable milk products, such as UHT (ultra-high temperature) milk, and are made of paperboard, plastic, and aluminum layers. These materials provide a barrier against light, oxygen, and moisture, which helps to preserve the milk's freshness and flavor. Moreover, cartons are lightweight and stackable, which makes them easy to store and transport.
Plastic bottles are widely used for packaging fresh milk, and the choice of plastic depends on the application. For example, high-density polyethylene (HDPE) is commonly used for milk jugs due to its high strength and stiffness, while low-density polyethylene (LDPE) is used for milk bags due to its flexibility and durability.
Plastic bottles are lightweight, shatter-resistant, and provide a good barrier against oxygen and water vapor.
Glass bottles are another popular choice for milk packaging, and they provide an airtight and inert container for milk. Glass is impermeable to gases and does not interact chemically with the milk, which helps to maintain the milk's freshness and flavor.
However, glass is relatively heavy, fragile, and requires more energy to manufacture and transport compared to other packaging materials.
The choice of packaging material depends on various factors, such as the product's properties, manufacturing cost, consumer preference, and environmental impact. The reactivity of a material depends on its position in the periodic table, with metals being more reactive than nonmetals.
Aluminum is a highly reactive metal, but it forms a protective oxide layer that prevents further reaction with the environment. Therefore, it is commonly used for making cooking utensils as it is lightweight, durable, and has good thermal conductivity.
The packaging plays an essential role in protecting the product from contamination, physical damage, and deterioration. The use of improper packaging materials or techniques can lead to the growth of microorganisms, loss of nutrients, off-flavors, and potential health hazards.
For example, the migration of harmful chemicals from plastic packaging into food can cause health problems such as endocrine disruption, cancer, and reproductive disorders.
To know more about chemical properties refer to-
https://brainly.com/question/1935242
#SPJ11
How many calories of energy (heat) is released when 250. 0 g of lead is cooled from 15. 0˚C to 12. 0˚C
When 250.0 g of lead is cooled from 15.0°C to 12.0°C, approximately 29.36 calories of energy (heat) are released.
To calculate the amount of energy (heat) released when 250.0 g of lead is cooled from 15.0°C to 12.0°C, we need to use the specific heat capacity and the change in temperature of lead. The specific heat capacity of lead is 0.128 J/g°C.
The equation to calculate the energy released (Q) is:
Q = m × c × ΔT
where m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.
Substituting the given values, we get:
Q = 250.0 g × 0.128 J/g°C × (12.0°C - 15.0°C)
Q = - 122.88 J
The negative sign indicates that energy is being released, as the lead is losing heat. To convert this to calories, we need to divide by the conversion factor of 4.184 J/cal:
Q = - 122.88 J ÷ 4.184 J/cal
Q ≈ - 29.36 cal
Therefore, when 250.0 g of lead is cooled from 15.0°C to 12.0°C, approximately 29.36 calories of energy (heat) are released.
To know more about specific heat capacity refer to-
https://brainly.com/question/29766819
#SPJ11
Draw the primary alcohol and aldehyde that would be used to synthesize heptanoic acid
The primary alcohol required for the synthesis of heptanoic acid is heptanol, which has the chemical formula C₇H₁₆O. The aldehyde required for this synthesis is heptanal, which has the chemical formula C₇H₁₄O.
Heptanoic acid is a carboxylic acid with seven carbon atoms. It can be synthesized from primary alcohol and an aldehyde via oxidation.
To synthesize heptanoic acid, heptanol, and heptanal are reacted in the presence of an oxidizing agent, such as potassium permanganate (KMnO₄) or chromium trioxide (CrO₃). The oxidation of heptanol produces heptanal, which is further oxidized to heptanoic acid. The chemical equation for the synthesis of heptanoic acid is as follows:
C₇H₁₆O + O → C₇H₁₄O + H₂O
C₇H₁₄O + O → C₇H₁₂O₂ + H₂O
The resulting product, heptanoic acid, is a colorless liquid with a pungent odor and is commonly used as a flavoring agent and in the production of esters for fragrances and plastics.
To learn more about heptanoic follow the link:
brainly.com/question/30885566
#SPJ4
According to the general procedure of Experiment A2b, 213 mg of (E)-stilbene (180. 25 g/mol) was reacted with 435 mg of pyridinium bromide perbromide (319. 82 g/mol) to afford 342 mg of meso-stilbene dibromide (340. 05 g/mol) as a white solid. Calculate the percent yield for this reaction. Enter your answer as digits only (no units), using the proper number of significant figures
The percent yield for the given reaction is 85.29%.
The percent yield for this reaction can be calculated using the formula:
percent yield = (actual yield / theoretical yield) x 100
The theoretical yield can be calculated based on the stoichiometry of the reaction. From the equation given, we know that 1 mole of (E)-stilbene reacts with 1 mole of pyridinium bromide perbromide to produce 1 mole of meso-stilbene dibromide.
First, let's calculate the number of moles of (E)-stilbene:
213 mg (E)-stilbene x 1 g/1000 mg x 1 mol/180.25 g = 0.00118 mol (E)-stilbene
Next, let's calculate the number of moles of pyridinium bromide perbromide:
435 mg pyridinium bromide perbromide x 1 g/1000 mg x 1 mol/319.82 g = 0.00136 mol pyridinium bromide perbromide
Since the stoichiometry is 1:1, the number of moles of meso-stilbene dibromide produced is also 0.00118 mol.
Finally, let's calculate the theoretical yield in grams:
theoretical yield = 0.00118 mol x 340.05 g/mol = 0.401 g
Now we can calculate the percent yield:
percent yield = (0.342 mg / 0.401 g) x 100 = 85.29%
Therefore, the percent yield for this reaction is 85.29%.
Learn more about percent yield at https://brainly.com/question/14714924
#SPJ11
Can someone answer the questions in the image?.
“Balancing equations”
Ans.1
blank 1 =1
blank 2 = 3
blank 3 = 2
Ans.2
blank 1 = 6
blank 2 = 4
blank 3 = 5
Ans.
blank 1 = 11
blank 2 = 7
blank 3 = 8
the answer to this problem
Here, each of the elements below with the class to which it belongs.
Lithium → Alkali metals
Uranium → Transition metals
What is an Alkali metals?
Alkali metals are a group of highly reactive chemical elements in the periodic table. These elements include lithium (Li), sodium (Na), potassium (K), rubidium (Rb), cesium (Cs), and francium (Fr). Alkali metals have a single electron in their outermost shell, which makes them highly reactive and able to easily lose that electron to form a positive ion. They are typically soft, silvery-white metals that have low melting and boiling points, and are highly reactive with water and other substances. Alkali metals are important in various industrial applications, such as batteries, alloys, and chemical synthesis.
Krypton → Noble gases
Manganese → Transition metals
Fluorine → Halogens
Barium → Alkaline Earth
Most reactive metal → Alkali metals
Silicon → Metalloids
Groups 3-12 → Transition metals
Most reactive nonmetals → Halogens
Inert and unreactive → Noble gases
Has characteristics of metals and nonmetals → Metalloids
To know more about Metalloids, visit:
https://brainly.com/question/6422662
#SPJ1
Consider this question posed at the beginning of the task:
do two magnets create magnetic force fields that allow them to interact without touching?
did the investigation answer the question? explain whether the investigation gave enough evidence to support the idea
that invisible magnetic force fields exist.
ments
Yes, two magnets can create magnetic force fields that allows them to interact without touching.
Magnetic forces are non contact forces; they pull or push on objects without touching them. Magnets are only attracted to a few 'magnetic' metals and not all matter. Yes, the investigation did answer the question about whether two magnets create magnetic force fields that allow them to interact without touching.
The investigation provided enough evidence to support the idea that invisible magnetic force fields exist:
The investigation involved observing how two magnets interact with each other without touching. The magnets were brought closer together until they interacted, and then they were moved further apart. This process was repeated several times, and the results were observed and recorded. During the investigation, it was observed that the magnets interacted with each other even when they were not touching. This interaction occurred because the magnets created magnetic force fields that allowed them to interact with each other even when they were not in direct contact. This is because the interaction between the magnets could not be explained by any other means except through the existence of magnetic force fields.
To know more about magnetic force here
https://brainly.com/question/27949286
#SPJ4
Arrange the acids h2se, h2te, and h2s in order of increasing acid strength.
The acid strength increases with increasing acidity, which is the tendency to donate a proton (H+). H2Te < H2Se < H2S
The acidity of an acid is related to its acid dissociation constant (Ka). The higher the Ka, the stronger the acid.
The Ka values for the given acids are:
H2S: Ka = [tex]9.0 × 10^-8[/tex]
H2Se: Ka = [tex]1.3 × 10^-8[/tex]
H2Te: Ka = [tex]3.3 × 10^-9[/tex]
Therefore, the order of increasing acid strength is:
H2Te < H2Se < H2S
This is because H2Te has the lowest Ka value, indicating that it is the weakest acid of the three. Conversely, H2S has the highest Ka value, indicating that it is the strongest acid of the three.
To know more about acid dissociation constant refer to-
https://brainly.com/question/31386094
#SPJ11
Help what’s the answer?
From the calculations, we can see that the mass of the acetic acid that is produced is 28.2 g.
What is the limiting reactant?In a chemical reaction involving two or more reactants, the limiting reactant is the reactant that is consumed completely, thereby limiting the amount of product that can be formed. The other reactant(s) that remain after the limiting reactant is completely consumed are called excess reactants.
Number of moles of CH3CHO = 20.8g/44 g/mol
= 0.47 moles
Number of moles of O2 = 14.5 g/32 g/mol
= 0.45 moles
If 2 moles of CH3CHO reacts with 1 mole of O2
0.47 moles of CH3CHO would react with 0.47 * 1/2
= 0.24 moles
Thus CH3CHO is the limiting reactant
Mass of the acetic acid produced = 0.47 moles * 60 g/mol
= 28.2 g
Learn more about acetic acid:https://brainly.com/question/15202177
#SPJ1
A series of lines in the spectrum of neutral Li atoms rise from transitions between 1s2 2p1 2P1s 2 2p 12 and 1s2nd1 2D1s 2 nd 12 D and occur at 610. 36 nm, 460. 29 nm, and 413. 23 nm. The d orbitals are hydrogenic. It is known that the transition from the 2P 2 P to the 2S 2 S term (which arises from the ground-state configuration 1s22s1)1s 2 2s 1 ) occurs at 670. 78 nm.
Calculate the ionization energy of the ground-state atom
Ionization energy for the neutral Li atom in its ground state is approximately 520.9 kJ/mol.
The energy required to remove an electron from an atom in its ground state is the ionization energy. In this problem, we are given the wavelengths of various transitions of neutral Li atoms. From these wavelengths, we can calculate the energy of each transition using the equation E=hc/λ,
where h is Planck's constant,
c is the speed of light
λ is the wavelength.
Using the given wavelengths, we can calculate the energy of each transition and determine the difference in energy between the ground state and the excited state. The ionization energy is the energy required to remove an electron from the ground state, which is equal to the energy difference between the ground state and the ionized state.
In this case, the transition from the ground-state configuration 1s²2s¹ to the 2P term occurs at 670.78 nm. From this, we can calculate the energy difference between the ground state and the 2P term. Then, by adding the energy differences between the 2P and 2D terms, and the 2D and 2S terms, we can calculate the ionization energy of the ground-state atom. As a result, when the temperature lowers to 8.5°C in the evening, the volume of the vessel is roughly 2.64 L.
To know more about the Ionization energy, here
https://brainly.com/question/13088843
#SPJ4
Pressure is equal to force per unit area. P=F/A therefore F=PA
A brick has the following dimensions, 1. 00 mx 0. 200 m x 0. 500 m. The pressure exerted
by the brick on the floor is different when the brick is placed in different ways. If the
minimum pressure exerted by the brick on the floor is 100. 0 Pa, what is the force
exerted on the floor in newtons (N)?
O 200. N
0 50. 0 N
O 10. 0 N
O 100, N
A brick with dimensions 1.00 m x 0.200 m x 0.500 m exerts different pressures on the floor when placed in different ways. The force exerted on the floor is 20.0 N.
To calculate the force exerted on the floor by the brick, we need to first calculate the area of the face of the brick that is in contact with the floor. The minimum pressure exerted by the brick on the floor is given as 100.0 Pa. Therefore, the force exerted on the floor by the brick can be calculated as:
Force = Pressure x Area
The area of the face of the brick in contact with the floor is given by 1.00 m x 0.200 m = 0.200 m². Therefore, the force exerted on the floor by the brick is:
Force = 100.0 Pa x 0.200 m² = 20.0 N
Since 20.0 N is not listed in the given options, it seems there may be an error or discrepancy in the provided answer choices.
To know more about the force exerted refer here :
https://brainly.com/question/18315231#
#SPJ11
Water companies measure the volume of water used by households in
cubic metres (mº).
25 cm of a different water sample contained 0. 016 g of dissolved solids,
Calculate the mass of dissolved solid in 1 m' of this water sample.
1 m3 = 1000 dm
Give your answer in standard form.
The mass of dissolved solids in 1 m³ of the water sample is 16 g.
To convert from cm³ to m³, we divide by 1,000,000 (10^6) since there are 1,000,000 cm³ in 1 m³.
First, we need to find the mass of dissolved solids in 1 cm³ of the water sample:
0.016 g/25 cm³ = 0.00064 g/cm³Next, we can find the mass of dissolved solids in 1 m³ of the water sample:
0.00064 g/cm³ x 1,000,000 cm³/m³ = 640 g/m³However, the answer should be given in standard form, so we convert 640 to scientific notation:
6.4 x 10² g/m³To learn more about mass of dissolved solids, here
https://brainly.com/question/14906002
#SPJ4